Beli Tektronix Tds 784C bekas (199)

Tahun pembuatan: 2011, Kondisi: baik (bekas), The extrusion line No. 1 was designed for the production of cast film. Processing of thermoplastics within a temperature range of 150-300°C. POSSIBLE LAYER STRUCTURES: - Monolayer film - 3-layer (A-B+C-A) - 5-layer (A-B-C-B-A) LINE DATA: Maximum total extruder output: 2230 kg/h Extruder A: 90/33 L/D, max. 330 kg/h Extruder B: 135/33 L/D, max. 950 kg/h Extruder C: 135/33 L/D, max. 950 kg/h Net film width range: 1600 - 2110 mm Two-roll slitting possible (2x 800 - 2x 1055 mm) Thickness range: 25-580 μm Production speed: 10 - 150 m/min Roll width: 2500 mm Max. roll weight: 2000 kg ADDITIONAL COMPONENTS (QUALITY): Non-contact thickness measurement system for automated cross-web (TD) profile measurement with dual-side Corona treatment (max. 12,000W) Optical inspection system, including marking system for defect detection, transmitted and incident light system INFRASTRUCTURE (ADDITIONAL UNITS): Dryers 1-4 each with 4500-liter volume; heating capacity 48 kW Dryer 5 with 2500-liter volume; heating capacity 20 kW Dryer 6 with 1500-liter volume; heating capacity 15 kW Each extruder equipped with gravimetric batch dosing system (3 stations) Each extruder equipped with melt pump and 2-piston screen changer system MAIN COMPONENT MANUFACTURERS: SML: Extruders; frame, rollers, winding unit GWK: Cooling extruder KREYENBORG: Screen changer Cloeren: Feedblock, wide slot die PIOVAN: Dryers, dosing system SERVE: Edge trim cutting device MATHO: Extraction system RAPID: Edge trim granulator KONGSHILDE: Edge trim handling, start-up rollers INFSTAUB: Bagging station SMK: Chillers SIEMENS: Control system OCS: Camera system SEMET: Labeling system Lajdpepah U Tsfx Ah Toc AFS: Corona station BETA CONTROLL: Radiometric thickness measurement SML: Automatic flying splice winding unit, BECKOFF control SIMCO: Antistatic equipment ALTEK: Automatic roll manipulator (transfer cart)

Tahun pembuatan: 2000, Kondisi: siap digunakan (bekas), The following equipment is available: 3x Kaeser compressors, 2x Atlas Copco compressors, and 3x Kaeser refrigerant dryers. 1) Kaeser Compressor CS 75, year of manufacture: 1992, operating pressure: 10 bar, operating hours: 38,265 h. Lasdpfx Aheulkvdo Tec 2) Kaeser Compressor AS 44, year of manufacture: 1999, operating pressure: 8.5 bar, operating hours: 41,564 h. 3) Kaeser Compressor BS 60, year of manufacture: 1983, operating pressure: 7.5 bar, operating hours: 50,674 h. 4) Atlas Copco Compressor GA 45, year of manufacture: 1990, operating pressure: 10 bar, operating hours: 26,831 h. 5) Atlas Copco Compressor GA 45, year of manufacture: 1990, operating pressure: 10 bar, operating hours: 52,447 h. 6) Kaeser Refrigerant Dryer TD 51, year of manufacture: 1997, refrigerant: R22. 7) Kaeser Refrigerant Dryer TF 171, year of manufacture: 2000, refrigerant: R134a. 8) Kaeser Refrigerant Dryer TE 76, year of manufacture: 1996, refrigerant: R22. Documentation is available. On-site inspection is possible.

Kondisi: bekas, jarak tempuh: 489.000 km, daya: 338 kW (459,55 hp), pendaftaran pertama: 11/2017, jenis bahan bakar: diesel, berat muatan maksimum: 141.370 kg, berat keseluruhan: 26.000 kg, ukuran ban: 245/70r19.5, konfigurasi gandar: 6x4, jarak roda: 5.100 mm, inspeksi berikutnya (TÜV): 10/2024, rem: intarder, warna: putih, kabin pengemudi: kabin tidur, tipe perpindahan gigi: otomatis, kelas emisi: Euro 6, suspensi: udara, panjang ruang muatan: 8.100 mm, lebar ruang muat: 2.460 mm, tinggi ruang muatan: 2.650 mm, Tahun pembuatan: 2017, Perlengkapan: ABS, kebisingan rendah, kompresor, komputer bawaan, kontrol traksi, kopling trailer, pendaftaran mobil, retarder, sistem navigasi, spoiler, tail lift,

Kondisi: bekas, jarak tempuh: 500 km, daya: 294 kW (399,73 hp), konfigurasi gandar: 4x2, warna: putih, kabin pengemudi: kabin harian, tipe perpindahan gigi: otomatis, Tahun pembuatan: 2026, Perlengkapan: ABS, pendingin udara,

Kondisi: bekas, TECHNICAL DATA - Number of axes: 7 - Number of spindles: 2 MAIN SPINDLE - Max. bar diameter: 42 [mm] - Max. machining length: 110 [mm] - Spindle speed: 6,000 [rpm] - Spindle drive power: 5.5 [kW] - Minimum C-axis resolution: 0.001 [degrees] SUB SPINDLE - Max. bar diameter: 42 [mm] - Spindle speed: 6,000 [rpm] - Spindle drive power: 3.7 [kW] - Minimum C-axis resolution: 0.001 [degrees] BUSHING HOLDER 1 - Number of positions: 5 FRONT TOOLPOST - Number of positions: 5 BACKWORKING - Number of positions: 4 Ledpfxex S R Nts Ah Tjac - Number of driven positions: 4 - Driven tool speed: 6,000 [rpm] - Driven tool power: 1.4 [kW] ELECTRICAL SUPPLY - Supply voltage: 380 [V] - Total power requirement: 25 [kVA] WEIGHT AND DIMENSIONS - Footprint: 2,880 x 1,375 [mm] - Machine height: 1,940 [mm] - Machine weight: 3,300 [kg] MACHINE HOURS - Operating hours: 18,939 [h] EQUIPMENT - CNC control: Fanuc 0i-TD - Interface: RS232 - Driven guide bushing - Parts ejector - Parts removal device - Parts conveyor belt - Chip conveyor - Coolant tank - Bar feeder: LNS SPRINT 565 - Oil mist extraction

Kondisi: baru, Tahun pembuatan: 2020, en Ledpfsiu Smbox Ah Toac

Kondisi: baru, Tahun pembuatan: 2025, Clamping force 240 kN Clamping plate 380x380 mm Distance between tie bars 250x250 mm Machine weight approx. 3.0 t Clamping stroke 180 mm Ejector force 28 kN Ejector stroke 50 mm Mould height 120–300 mm Tie bar diameter 45 mm Lsdpfxex Hp E As Ah Teac Injection force 43 kN Injection stroke 85 mm Injection plunger diameter 36, 40, 45 mm Injection volume (DIN 24480) 47, 63, 87 cm³ Specific injection pressure 420, 340, 270 daN/cm² Corresponding parting surface 56, 70, 88 cm² De-moulding stroke 150 mm Machine equipment: 1.0.2 Clamping unit cover at machine base with scales / chute 1.0.3 Small parts cover in machine base 1.1.0 Motorized safety door in casting direction left 1.4.0 Machine mountings 1.5.4 Interior machine lighting 1.11.0 Equipment package – Energy efficiency 2.0.1.2 Ejector assistance package Technology incl. SensiEject 2.6.4 Machine assistance system SensiLock® 2.8.0 Hydraulic adjustment of clamping unit 3.0.1.2 Injection assistance package Technology incl. SensiInject 3.2.9 EcoMelTec multi-chamber holding and melting furnace 3.4.4 Pre-filling injection system 3.4.5 Simplified injection plunger removal 3.4.6 Injection plunger stop on return stroke 3.5.2 Electric nozzle and injection pot heating 3.5.3 Plug-in connections for electric nozzle and injection pot heating 4.5.0 Shut-off device for hydraulic assemblies 4.6.1.2 Integrated water circuit control 2+4 circuits 5.1.0 Machine control DATADIALOG – RC 5.1.5 Maintenance advantage package 5.6.1 Cable lengths 6.1.3.1 Wired signal interface for extraction device DISPO10 6.1.4 Serial interface for 4 heating/cooling circuits 6.1.5 Interface for vacuum unit 6.3.1.1 Control unit with visualization on support arm 6.5.2 Equipment package RSD with switch 7.2.1.2 Spraymotion 411 E with servo drive 7.2.10 Extended spraying program 7.3.1 Release agent tank TD 20 7.4.0.1 Spray bar CR 155

Kondisi: baru, Tahun pembuatan: 2024, Clamping force: 900 kN Clamping platen: 540 x 540 mm Tie bar spacing: 350 x 350 mm Machine weight: approx. 5.3 t Clamping stroke: 280 mm Ejector force: 61 kN Ejector stroke: 70 mm Mould height: 160–400 mm Tie bar diameter: 65 mm Casting force: 78 kN Casting stroke: 130 mm Plunger diameters: 50, 55, 60 mm Casting volume (DIN 24480): 147, 191, 241 cm³ Specific casting pressure: 396, 327, 275 daN/cm² Corresponding parting surface: 226, 274, 326 cm² Ejector stroke: 220 mm Machine Equipment 1.0.2 Clamping unit cover on base frame with integrated scale/slide 1.1.0 Motorized safety door on casting side, left 1.4.0 Machine mountings 1.5.4 Machine interior lighting 1.11.0 Equipment package – energy efficiency 2.0.1 Ejector Advantage Package 2.6.4 Machine assistance system SensiLock® 2.8.0 Hydraulic adjustment of the clamping unit 3.0.1 Casting Assistance Advantage Package 3.2.9 EcoMelTec multi-chamber holding and melting furnace Lsdpfsr Hwf Asx Ah Toac 3.4.4 Pre-filling of casting system 3.4.5 Simplified casting plunger removal 3.4.6 Casting plunger stop on return stroke 3.5.2 Electric nozzle and casting chamber heating 3.5.3 Plug-in connections for electric nozzle and casting chamber heating 4.5.0 Shut-off device for hydraulic assemblies 4.6.1.3 Integrated water circuit control, 2+6 circuits 5.1.0 Machine control DATADIALOG – RC 5.1.5 Maintenance advantage package 5.6.1 Special cable lengths 6.1.3.1 Digital interface for third-party extraction device 6.1.4 Serial interface for 4 heating/cooling circuits 6.1.5 Interface for vacuum unit 6.3.1.1 Operator unit with visualization on support arm 6.5.2 RSD equipment package with switch 7.2.2.2 Spraymotion 611 E with servo drive 7.2.10 Extended spray program 7.3.1 Release agent container TD 20 7.4.0.3 Spray bar CR 275

Kondisi: bekas, TECHNICAL DATA - Number of spindles: 8 - Number of counter spindles: 1 - Maximum bar feed: 178 mm - Number of cross slides: 8 SPINDLES - Maximum bar diameter: 32 mm - Spindle speed: 199-2737 rpm - Electromagnetic clutch COUNTER SPINDLE - Counter spindle position: 7 ELECTRICAL SUPPLY - Supply voltage: 380 V WEIGHT AND DIMENSIONS - Floor space required: 6632 x 1357 mm - Machine weight: 7950 kg ACCESSORIES - CNC control: Fanuc Series 0i-TD Lodpfx Aeyh Rnqsh Toac - Parts removal unit - Coolant tank - Bar magazine: IEMCA PRA 40/42F - Bar holder with base

Kondisi: bekas, TECHNICAL DATA - Max. bar diameter: 32 mm - Max. feeder length: 178 mm - Max. turning length: 63.5 mm - Number of spindles: 8 - Number of cross slides: 8 - Number of spindle speeds: 26 - Spindle speed range: 199–2737 rpm - Standard stroke of independent feeds: 73 mm - Dimensions: 6632 x 1357 mm - Weight: 7,950 kg EQUIPMENT / ACCESSORIES - Pickup spindle, hydraulic, Saco position 7 - Drum and foot - Magnetic chip conveyor - Smoke extraction system - Parts catcher chute - Bar end chute - Parts conveyor belt - High-pressure pump - Cutting tool holder, position 7 - Drill holder, position 8 Ljdpjyh Rm Hjfx Ah Tsac - Steady rest middle block, position 1 - Steady rest and drill holder, position 2 - Numerical slide RTECH location 5: 2 axes CNC: FANUC Oi-TD - IEMCA PRA40/42F bar loading magazine

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 2009, Fungsionalitas: berfungsi sepenuhnya, Used machine 2009 / Factory Refurbished in 2025 Ideal for gathering calendars, folded sections, all types of cardboard, packaging, etc. Calendar Gathering Machine Type – MKW RAPID UT – Carousel Table Machine 32 – Number of Stations B3 – Format 35 cm x 50 cm GS – High-Pile Feeder, max. 70 cm loading height 1 Gathering Collator Type MKW RAPID UT / B3 / GS - With 32 stations in carousel table design - Format up to 35 x 50 cm - High-pile feeder with max. 70 cm pile height - Paper weights up to approx. 1,000 g/m² - Single sheets, folded sections, cardboard, plastic films, etc. - Toothed belt transport table for continuous paper feed - Radially adjustable toothed belt table for precise sheet placement - Toothed belt radial adjustment via electric clutches - Foldable transport carriers - Adjustable pick-up suckers for optimal paper handling - Compressed air-vacuum generator in sound-dampened housing - Blowing air for precise sheet placement - Electronic machine control via industrial PC - High-quality color display for clear and safe operator guidance - Self-calibrating miss- and double-sheet detection per station - Miss- and double-sheet detection using IR sensor - Tandem function for dual use 2:1 (TANDEM mode) - Dynamic station selection for optimized job preloading - Insert change function at any station - Carton change function at any station - Speed display with stepless adjustment - Preset counter with intermediate stop for set quantity and stop time - Output control for staggered stacking with adjustable set interval - Transport table lighting with fluorescent lamps - Jam control above the transport table - Ejector station including empty station at delivery AW 3 incl. (for ejecting faulty sets) - Lift control for delivery rollers AHB incl. (for different formats per set and folded sections) - Integrated output shaker system, incl. output shaker ASS i 3 incl. (for standard and staggered stacking) - Manual feeding station on the left side HV 3 incl. (including automatic station control in case of operator error) 1 Pre-stack Unit Type MKW VS 3 - Used as a permanently installed pre-stack cart - Format max. 35 x 50 cm - 30 fixed stations before the gathering collator - 2 mobile stations before the gathering collator (15+2+15) - 2 movable change plates per station 1 High-Pile Non-Stop Delivery Unit Type MKW RAPID TD-3 - High-pile delivery up to approx. 30 cm pile capacity - Formats up to 35 cm x 50 cm - Delivery with offset function - Stack function adjustable: straight stacking or offset function - Counting function adjustable: offset after counter - Automatic transport to buffer section - Controlled conveyor belt as buffer track, approx. 2.00 m - Plain text display for operation and monitoring Warranty period from date of delivery 12 months manufacturer's warranty in multi-shift operation (excluding wear parts such as rollers, rubber parts, belts, suckers, transport rollers) Ledpfxoxdy R Io Ah Tjac Spare Parts Package Comprehensive set of spare parts for all key wear parts included in scope of delivery Offer Validity Subject to prior sale Detailed offer upon request

Kondisi: bekas, TECHNICAL DATA - Number of axles: 5 - Number of spindles: 2 MAIN SPINDLE - Max. bar diameter: 20 mm Laodpfx Ahowizt Ds Tsc - Max. machinable length: 170 mm - Spindle speed: 10,000 rpm - Spindle drive power: 3.7 kW - Minimum C-axis resolution: 0.001° SUB SPINDLE - Max. bar diameter: 20 mm - Spindle speed: 10,000 rpm - Spindle drive power: 2.2 kW - Minimum C-axis resolution: 1° - Number of bush holders: 1 BUSH HOLDER 1 - Number of positions: 8 - Number of driven positions: 3 - Driven tool speed: 5,000 rpm FRONT TOOL POST - Number of positions: 4 SUB OPERATION - Number of positions: 7 ELECTRICAL SUPPLY - Supply voltage: 400 V - Total drive power: 11 kW WEIGHT AND DIMENSIONS - Required floor space: 1640 x 1200 mm - Machine height: 1725 mm - Machine weight: 1950 kg - Operating hours: 11,500 h ACCESSORIES - Control: Fanuc Oi TD - Driven guide bushing - Parts catcher - Parts conveyor - Parts ejector - Chip conveyor - Coolant tank - Bar feeder: Tornos SBF 320 - Electrical transformer

Kondisi: bekas, TECHNICAL DATA - Number of axes: 5 - Number of spindles: 2 MAIN SPINDLE - Max. bar diameter: 20 mm - Max. machining length: 170 mm - Spindle speed: 10,000 rpm - Spindle drive power: 3.7 kW - Minimum C-axis resolution: 0.001° SUB-SPINDLE - Max. bar diameter: 20 mm - Spindle speed: 10,000 rpm - Spindle drive power: 2.2 kW - Minimum C-axis resolution: 1° - Number of bushing holders: 1 - Number of positions: 8 - Number of driven positions: 3 - Driven tool speed: 5,000 rpm FRONT TOOL POST - Number of positions: 4 BACK MACHINING - Number of positions: 7 ELECTRICAL SUPPLY - Supply voltage: 400 V - Total power consumption: 11 kW WEIGHT AND DIMENSIONS - Required floor space: 1640 x 1200 mm - Machine height: 1725 mm - Machine weight: 1950 kg OPERATING HOURS - Operating hours: 21,523 h ACCESSORIES - Control unit: Fanuc Oi-TD - Driven guide bushing - Parts catcher - Parts conveyor belt - Parts ejector - Coolant tank Ledpfxjuha Tvs Ah Toac - Prepared for bar feeder - Bar feeder: fedek - Fire extinguishing system * Note: Functionality not guaranteed. Must be checked by a qualified company on the buyer’s side. - Electrical transformer

Kondisi: bekas, TECHNICAL DATA - Number of axes: 5 - Number of spindles: 2 MAIN SPINDLE - Max. bar diameter: 12 mm - Max. machining length: 170 mm - Spindle speed: 12,000 rpm - Spindle drive power: 2.2 kW - Minimum C-axis resolution: 0.001° SUB SPINDLE - Max. bar diameter: 12 mm - Spindle speed: 12,000 rpm - Spindle drive power: 2.2 kW - Minimum C-axis resolution: 0.001° TOOL HOLDER 1 - Number of positions: 8 - Number of driven positions: 3 - Driven tool speed: 5,000 rpm FRONT TOOL POST - Number of positions: 4 Laedpsuhbaqofx Ah Tsc BACK WORKING STATION - Number of positions: 8 ELECTRICAL SUPPLY - Supply voltage: 400 V - Total connected load: 11 kW DIMENSIONS AND WEIGHT - Footprint: 1,640 x 1,200 mm - Machine height: 1,725 mm - Machine weight: 1,950 kg MACHINE HOURS - Power-on hours: 57,838 h - Operating hours: 51,295 h - Spindle hours: 20,396 h EQUIPMENT - Control: Fanuc 0i-TD - Driven guide bushing - Parts catcher - Parts conveyor - Parts ejector - Chip conveyor - Coolant tank * with high-pressure pump - Bar feeder: FMB

Kondisi: bekas, TECHNICAL DATA - Number of axes: 5 - Number of spindles: 2 MAIN SPINDLE - Max. bar diameter: 20 mm - Max. machining length: 210 mm - Spindle speed: 200 – 10,000 rpm - Spindle drive power: 2.2 / 3.7 kW - Minimum C-axis resolution: 0.001° SUB SPINDLE - Max. bar diameter: 20 mm - Spindle speed: 200 – 12,000 rpm - Spindle drive power: 2.2 / 3.7 kW - Minimum C-axis resolution: 0.001° TOOL HOLDER 1 - Number of positions: 5 - Number of driven positions: 3 - Driven tool speed: 8,000 rpm TOOL HOLDER 2 - Number of positions: 3 FRONT TOOL POST - Number of positions: 8 SUBSEQUENT MACHINING UNIT - Number of positions: 4 Lsdpfsuhbbzex Ah Teac - Number of driven positions: 2 - Driven tool speed: 8,000 rpm ELECTRICAL SPECIFICATIONS - Total connected load: 11 kVA WEIGHT AND DIMENSIONS - Footprint: 1,655 x 1,125 mm - Machine height: 1,700 mm - Machine weight: 2,000 kg MACHINE HOURS - Operating hours: 13,837 [hours] ACCESSORIES - Control: Fanuc Oi-TD - 3-color status light - Driven guide bushing - Parts catcher - Parts conveyor - Parts ejector - Chip conveyor - Coolant tank * with high pressure pump: 70 bar - Bar feeder: IEMCA ELITE 220 E / 32 LL - Fire extinguishing system * Note: Functionality not guaranteed. Must be checked by a qualified company commissioned by the buyer. - Electrical transformer

Kondisi: bekas, TECHNICAL DATA - Number of axes: 2 MAIN SPINDLE - Spindle speed: 8,000 [rpm] - Spindle drive power: 2.2 / 3.7 [kW] - Max. machinable diameter: 60 x 60 [mm] RIGHT UPPER TURRET Laedpfxewdafbs Ah Tec - Travel X/Z: 300 x 285 [mm] ELECTRICAL SUPPLY - Supply voltage: 200 [V] - Total connected load: 10 [kVA] WEIGHT AND DIMENSIONS - Footprint: 1,400 x 1,575 [mm] - Machine height: 1,670 [mm] - Machine weight: 1,650 [kg] MACHINE HOURS - Power-on hours: 68,992 [h] - Operating hours: 15,107 [h] ACCESSORIES - Control: Fanuc 0i-TD - Coolant tank - Part removal - Loading cell - Electrical transformer

Kondisi: bekas, TECHNICAL DATA - Number of axes: 5 Lodpfxowttdce Ah Toac - Number of spindles: 2 MAIN SPINDLE - Max. bar diameter: 20 mm - Max. machining length: 170 mm - Spindle speed: 10,000 rpm - Spindle drive power: 3.7 kW - Minimum C-axis resolution: 0.001° SUB SPINDLE - Max. bar diameter: 20 mm - Spindle speed: 10,000 rpm - Spindle drive power: 2.2 kW - Minimum C-axis resolution: 1° - Number of tool holders: 1 TOOL HOLDER 1 - Number of positions: 8 - Number of driven positions: 3 - Driven tool speed: 5,000 rpm FRONT TOOL POST - Number of positions: 4 BACK WORKING STATION - Number of positions: 7 ELECTRICAL SUPPLY - Supply voltage: 400 V - Total connected load: 11 kW DIMENSIONS AND WEIGHT - Floor space required: 1640 x 1200 mm - Machine height: 1,725 mm - Machine weight: 1,950 kg ACCESSORIES - Control unit: Fanuc Oi TD - Driven guide bushing - Parts catcher - Parts conveyor - Parts ejector - Chip conveyor - Coolant tank - Bar loader: Tornos SBF 320

Kondisi: bekas, TECHNICAL DATA Ljdpfx Aowdad Reh Toac - Number of axles: 2 MAIN SPINDLE - Spindle speed: 8,000 [rpm] - Spindle drive power: 2.2 / 3.7 [kW] - Max. machinable diameter: 50 x 40 [mm] RIGHT UPPER TURRET - Travel X/Z: 220 x 220 [mm] - Rapid traverse speed: 15 [m/min] ELECTRICAL SUPPLY - Supply voltage: 200 [V] - Total power requirement: 11 [kVA] WEIGHT AND DIMENSIONS - Space requirement: 1,880 x 1,390 [mm] - Machine height: 1,600 [mm] - Machine weight: 1,600 [kg] MACHINE HOURS - Operating hours: 18,941 [hrs] ACCESSORIES - Control: Fanuc 21i-TD - Coolant tank - Parts removal unit - Loading cell - Electrical transformer

Kondisi: bekas, TECHNICAL DATA - Grinding length: 120 mm - Center height: 102 mm - Travel paths (X/Z): 450 x 200 mm - Rapid traverse speeds (X/Z): 12 m/min SPINDLE SUPPORT - Number of spindles: 2 WORKPIECE SPINDLE HEAD Laedpfsuhbmqox Ah Tsc - Max. workpiece spindle speed: 1500 rpm - Spindle bore: 28.6 mm - Power: 1.4 kW - Mount taper: A2.4/CM5 - Torque: 150 Nm - Manual B-axis angle: +/- 2° - C-axis: 0.0001° SUPPLY - Installed power: 34 kVA DIMENSIONS - Required floor space: 3600 x 2800 mm - Weight: 2600 kg MACHINE HOURS - Power-on hours: 26,781 h EQUIPMENT - Fanuc Oi-TD control - Coolant supply through center of spindle - Cooling unit for spindle cooling - Workpiece loading robot - 2 available spindles: 59,600 - 41,600 rpm - Dressing turbine

Kondisi: bekas, td-20240615-001 Lajdpsxt U Rhofx Ah Tjc

Kondisi: siap digunakan (bekas), Fungsionalitas: berfungsi sepenuhnya, daya: 55 kW (74,78 hp), tipe perpindahan gigi: otomatis, jenis bahan bakar: diesel, berat kosong: 11.910 kg, Tahun pembuatan: 2020, jam operasional: 2.761 h, nomor mesin/kendaraan: MAN00000K01048416, Perlengkapan: AdBlue, Penandaan CE, RINCIAN TEKNIS Ukuran ban: 375/85-24 Konfigurasi sumbu: 4x4 Kapasitas angkat: 4000 kg Ketinggian angkat: 17,55 m Jangkauan: 13,08 m RINCIAN MESIN Daya: 55 kW Tipe transmisi: Otomatis Jenis bahan bakar: Diesel Merek mesin: TD 3.6 L4 Tingkat emisi: Stage V / Tier IV final Penggerak: Roda Bentuk sasis: Rigid Dimensi & Berat Dimensi transportasi (P x L x T): 6,27 m x 2,36 m x 2,45 m Lsdpfxjx Tq Nce Ah Teac Berat kosong: 11.910 kg Jam operasional: 2.761 jam PERALATAN Penggerak semua roda Sertifikasi CE Sistem AdBlue Garpu Kopling cepat Stabilisator Hidrolik tambahan

Kondisi: bekas, AJAX AJEV 180 x 750 CNC Turning Centre dengan turret model Duplamatic, tailstock, kontrol Fanuc Oi Mate - TD. Tahun pembuatan 2015. Berat 1200 kg. Laedpfx Aheyh Dn Dj Tec

Kondisi: bekas, Dimensi batu gerinda (od x id x lebar): 610 x 355 x 304,8 mm Ø min/maks yang dapat digerinda: 2 / 150 mm Jumlah kecepatan roda pengatur: tak terbatas Kecepatan min/maks roda pengatur (rpm): 10/225 rpm Diamond dresser (otomatis/manual): Otomatis - CNC Pelumasan (otomatis/manual): Otomatis Tipe kontrol (CNC/manual): CNC Merek CNC: FANUC Model CNC: Oi TD Plongée (otomatis/manual): Otomatis Dimensi roda pengatur (od x id x lebar): Ø350 x Ø203,2 x 355 mm Panjang maksimum penggerindaan plungée: 355 mm Daya motor pendingin: 0,70 kW Daya motor kepala batu gerinda: 37 kW Daya total: 45 kW Tegangan: 220/380 kW Laodpjydqfwjfx Ah Tec Panjang: 1.165 mm Lebar: 3.398 mm Tinggi: 1.700 mm Berat: 14.000 kg Aksesori: Loader baris, Filter pendingin, Batang penyangga

Kondisi: baik (bekas), Jarak antara pusat: 1000 mm Tinggi pusat: 175 mm Merek CNC: FANUC Model CNC: Oi-TD Laodotrgn Tjpfx Ah Toc