Beli Bor Vertikal bekas (7.341)

Kondisi: bekas, nomor mesin/kendaraan: 008557, Area kerja sumbu X: 3050 mm Itedpfx Adszcbhgjhjh Area kerja sumbu Y: 850 mm Daya spindle utama: 5 kW Jumlah sumbu terkontrol: 3 sumbu Jumlah spindle bor: 19

Kondisi: seperti baru (mesin pameran), Fungsionalitas: tidak berfungsi, Vertical drilling machine with automatic feed gripper system for material positioning. WITHOUT control unit and therefore not operational. Control cabinet is present but partially incomplete. Operating manual and wiring diagrams are available. WORKING RANGE: Round stock: 20 mm – 150 mm Square stock: 20 mm – 140 mm Flat stock (width): 20 mm – 240 mm Flat stock (height): 5 mm – 140 mm DRILLING UNIT: Vertical from above Min. drilling diameter: 6 mm Max. drilling diameter: 25 mm Tools: HSS drill bits only Spindle speeds: 380 rpm – 1,600 rpm Rapid advance/return: max. 11,000 mm/min Drilling feed: 10 – 1,500 mm/min Drill slide positioning: max. 17,000 mm/min DRIVE POWER: Frequency controlled (87 Hz characteristic curve): 2.6 kW MANUAL TOOL CHANGE: Quick-change tool holder: MK3 WORKPIECE CLAMPING: Horizontal: max. 5.6 kN FEED GRIPPER: Stroke length: 670 mm Feed speed: 6 – 60 m/min Return speed: 60 m/min AIR CONSUMPTION: Approx. 300 l/min MACHINE DIMENSIONS: (L x W x H) approx. 1,610 x 1,120 x 2,400 mm Isdsy At Iyjpfx Adhsth WORKING HEIGHT: Above floor: 1,040 mm WEIGHT: Machine without accessories: approx. 1,600 kg COMPRESSED AIR CONNECTION: Customer side (for air cooling unit): 6 – 8 bar

Kondisi: bekas, Tahun pembuatan: 1998, 13 spindle dengan jarak pusat 32mm Kedalaman bor maksimum sekitar 70mm Kecepatan spindle 2800 rpm Motor 2,5 hp Isdpfx Adjzd Uu Ishsth Kemiringan manual kelompok pengeboran dari vertikal ke horizontal (dapat dikunci di 45 derajat)

Kondisi: sangat baik (bekas), Tahun pembuatan: 2014, Axle 920 mm X-axis 3000 mm Material thickness Z: 12 mm - 30 mm Feed rate: 20 m/min A-axis: 360 degrees Minimum dimensions: Plate: X = 300 mm Y = 120 mm Z = 12 mm The machine is equipped with a 4-position drill chuck and a saw blade. Maximum and minimum hole diameters that can be drilled: 3 - 35 mm The saw blade operates in the X-direction Itedpsfmdcqsfx Adhsh Maximum groove depth with saw blade: 10 mm Motor: 0.75 HP, 400 Volt Required extraction capacity: 2300 m³/h Location: arriving in stock 54634 Bitburg - immediately available -

Kondisi: bekas, Mesin bor vertikal 4 spindle untuk benda kerja melengkung seperti sandaran kursi atau sejenisnya Isdpfezb A Rgex Adheth

Kondisi: bekas, nomor mesin/kendaraan: 008395, arbeitsbereich_achse_x_3050_mm_arbeitsbereich_achse_y_1250_mm_le istung_hauptspindel_10_kw_anz_kontrollierte_achsen_3_achsen_anzah l_bohrspindeln_27_anzahl_werkzeugplatze_8 Iedpfx Adoygtcqohoth

Kondisi: bekas, nomor mesin/kendaraan: 008200, arbeitsbereich-achse-x-y-spindelwerkzeugplaetze Iodpfx Adex A Ti Ujhoth

Kondisi: bekas, nomor mesin/kendaraan: 007468, Area kerja sumbu X: 3200 mm Area kerja sumbu Y: 1300 mm Daya spindle utama: 11 kW Isdpfxswuz Tus Adhoth Jumlah sumbu yang dikontrol: 3 sumbu Jumlah spindle bor: 36 Jumlah posisi alat: 10

Kondisi: bekas, nomor mesin/kendaraan: 008469, Area kerja sumbu X: 3050 mm Area kerja sumbu Y: 850 mm Jumlah sumbu terkontrol: 3 sumbu Jumlah spindle bor: 19 Jumlah tempat alat: 4 Ijdpfsywafuox Adhsth

Kondisi: bekas, Kepala frais vertikal, kepala frais dengan penggerak motor THIEL Tipe penahan alat: MK 5 (Morse Taper ukuran 5) Gerak pinol/spindel: 80 mm Putaran spindel pada putaran motor 1410 rpm = 490 / 780 / 1200 rpm Putaran spindel pada putaran motor 2950 rpm = 970 / 1530 / 2380 rpm Lubang spindel: 37 mm Daya motor: 1,4 / 1,8 kW Kecepatan motor: 1410 / 2850 rpm Iedpfoxddwrex Adhoth Tegangan listrik: 400 Volt, 50 Hz - Kecepatan spindel melalui 2 kecepatan motor dan 3 tahap sabuk - Flens pemasangan kepala frais Ø 215 mm dengan 2 lubang Ø 15 mm, jarak antar lubang 180 mm - cocok untuk alat dengan ulir penarik (alat dengan ejector tidak dapat dipasang) Dimensi (P x L x T): 450 x 400 x 350 mm Berat sendiri: 61 kg kondisi baik

Kondisi: bekas, nomor mesin/kendaraan: 007734, Area kerja sumbu X: 3050 mm Area kerja sumbu Y: 850 mm Daya spindle utama: 5 kW Jumlah spindle bor: 19 Itjdow Idb Hjpfx Adhsh

Kondisi: bekas, nomor mesin/kendaraan: 007289, Area kerja sumbu X: 3200 mm Area kerja sumbu Y: 900 mm Daya spindle utama: 4,5 KW Jumlah sumbu terkontrol: 3 sumbu Itodpfx Adswukyqshoh Jumlah spindle bor: 16

Kondisi: diremajakan ulang (bekas), Bor mesin bawah dan atas, dapat dimiringkan, untuk dudukan kursi tipe Old America atau produk serupa Itjdpfx Ajytr Ededhsh 4 unit bawah independen, dapat dimiringkan 2 unit atas vertikal berayun

Kondisi: bekas, nomor mesin/kendaraan: 006488, Area kerja sumbu X: 2500 mm Isdpfx Adswuclxehoth Area kerja sumbu Y: 850 mm Daya spindle utama: 5 kW Jumlah sumbu yang dikontrol: 3 sumbu Jumlah spindle bor: 11

Kondisi: bekas, nomor mesin/kendaraan: 008255, arbeitsbereich_achsen Itjdpex A Td Esfx Adhoh

Kondisi: baru, Tahun pembuatan: 2026, Fungsionalitas: berfungsi sepenuhnya, tegangan masuk: 400 V, arus masuk: 16 A, jenis aktuasi: listrik, lebar total: 1.487 mm, panjang total: 4.440 mm, tinggi total: 2.793 mm, berat keseluruhan: 1.900 kg, Perlengkapan: dokumentasi / manual, EXPOGLASS® PRIAM is a state-of-the-art vertical glass drilling machine featuring electronic feed, automatic drill length measurement, and glass thickness detection. The machine ensures high precision, smooth operation, and clean edges—even with large drilling diameters. Made in Poland – robust, user-friendly construction designed for intensive daily use in glass workshops. Main Technical Data: Length - 4440 mm Height - 2793 mm Width - 1487 mm Weight - 1900 kg Interface - HMI 7” display and analog buttons Drill spindle feed - Automatic Feed control - Electronic Loading bar control - Electronic Drill spindle speed - 700 RPM to 2800 RPM Automatic drill tip position detection Drill bit change mode - With plate lowering and spindle lock Spindle depth position detection - Electronic (calculated by controller) Horizontal positioning - Dual-row hand guard system Number of hand guards - 6 pcs Material clamping - Pneumatic Chamfering function for holes - Installed, electronically controlled Drill rack capacity - 70 drill bits (35 sets) Drill bit measurement accuracy - 5 mm Glass thickness measurement accuracy - 0.2 mm Max. height of loading bar (upper position) - 0 mm Max. height of loading bar (lower position) - 1050 mm Loading bar - Conveyor roller system Cooling system - Closed circuit Installed languages - (Polish, English, Bulgarian); other languages can be installed optionally Power connection: Plug - 16 A, 5 pin Compressed air connection - Standard, 7.2 NW Operating air pressure - 5 bar Voltage - 400 V 50 Hz Power - 4 kW Itodpjh Ek H Ssfx Adhjh

Tahun pembuatan: 2026, Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, VERTICAL ELECTRONIC GLASS DRILLING MACHINE MODEL: PRIAM YEAR OF MANUFACTURE 2026 / BRAND NEW The Priam model is a vertical glass drilling machine with two drilling spindles (double-sided), developed for customers seeking a functional and user-friendly device that is also highly durable. In designing this machine, we relied on traditional engineering principles: heavy, heat-treated steel frames with mechanical solutions that ease future operation and maintenance. This alternative approach to machine engineering and manufacturing ensures our machine can drill glass reliably for years, guaranteeing an excellent return on investment. To guarantee components are manufactured with the utmost care, our glass drilling machines are produced in Poland, in cooperation with local partners. The main frame of the machine is fabricated in-house and subsequently heat-treated and further finished by local shops. This way, the entire production process remains under our direct supervision, allowing any defects to be detected and rectified before delivery to the customer. In doing so, we also support the regional machinery industry. The assemblies that comprise the machine adhere to the highest European standards. Our suppliers include: SIEMENS, HITACHI, UNITRONICS, SCHNEIDER, GARLOCK. Mechanical components are readily available, and can be replaced quickly and easily during machine operation. Iodpfx Aegq Dl Ajdheth Expoglass Priam – Glass drilling machine – Top-level functionality ⦁ 2 drilling spindles (front and rear spindle). These allow glass sheets to be drilled through in a single operation without the need to turn them over. ⦁ Electronically controlled loading rail. To set the distance between the bottom glass edge and the drill hole, simply enter the desired measurement on the touchscreen; the machine will automatically move into position. ⦁ Quick-change drill bit mode. Once the driller change button is pressed, both spindles are locked automatically (cannot be rotated). The vertical plate between the drillers lowers, creating ample space between them. Drill bits can then be removed without tools, with plenty of room for easy, convenient access. ⦁ Automatic (electronic) drill length and position measurement. Upon finishing a drill change, the machine automatically calibrates, measuring the drill length. This enables the machine to determine the exact distance between the glass sheet and each drill tip. Essential for small-scale operations with one-off drilling rather than batch production. ⦁ Automatic (electronic) detection of spindle depth position. After automatic spindle calibration and clamping of the glass sheet, the machine measures the glass thickness and adjusts the drilling depth accordingly. The operator only needs to press the “Drill” button—the process is then fully automatic.

Kondisi: bekas, Comec vertical drilling machine with 3 spindles Itodpfx Aoy S Adisdhoh Maximum workpiece length: 100 cm

Kondisi: sangat baik (bekas), two spindle speeds selectable via switch belt drive motor power 0.8 kW vise power supply 380V Iodpfoyxcxajx Adhoth

Kondisi: baru, Tahun pembuatan: 2026, Fungsionalitas: berfungsi sepenuhnya, tegangan masuk: 400 V, arus masuk: 16 A, lebar total: 1.487 mm, panjang total: 4.440 mm, tinggi total: 2.793 mm, berat keseluruhan: 1.900 kg, VERTICAL ELECTRONIC GLASS DRILLING MACHINE MODEL: PRIAM BRAND NEW The Priam model is a vertical glass drilling machine with two drill spindles (dual-sided), specifically developed for customers seeking a functional and user-friendly device that is also highly durable. In designing this machine, we relied on traditional engineering principles—robust, heat-treated steel bodies combined with mechanical solutions that facilitate future operation and maintenance. Through this alternative approach to mechanical design and production, our machine can drill glass trouble-free for years, ensuring multiple returns on this investment. To ensure that components of our glass drilling machine are precisely manufactured, we produce them in Poland in cooperation with local partners. The machine’s main body is manufactured by us on-site, then heat-treated and further processed in local facilities. This way, the entire production is under our meticulous supervision, allowing us to detect and correct any potential defects before the product is delivered to the customer—thereby also supporting the local machinery industry. The assemblies comprising the machine meet the highest European standards. Our suppliers include: SIEMENS, HITACHI, UNITRONICS, SCHNEIDER, GARLOCK. Mechanical components are readily available and can be replaced quickly and easily during machine operation. Expoglass Priam – Glass Drilling Machine – Top-Level Functionality ⦁ 2 drill spindles (front and rear). These allow you to drill through a glass pane in a single operation without needing to turn it over. ⦁ Electronically controlled loading bar. To set the distance between the lower edge of the glass and the hole, simply enter the desired measurement on the touchscreen and the machine will automatically adjust to the correct position. ⦁ Quick-change drill mode. Once the drill change button is activated, both drill spindles are automatically locked (they cannot be turned). The vertical plate between the drills is lowered, creating ample space between the spindles. This allows the drills to be changed without a wrench, and there is generous space to perform the process comfortably. ⦁ Automatic (electronic) drill length and position measurement. After a drill change, automatic calibration takes place: the drill length is measured, allowing the machine to calculate the distance between the glass pane and each drill tip. This is especially important for smaller operations where most holes are made as custom, one-off jobs rather than serial production. ⦁ Automatic (electronic) determination of drill spindle depth positions. After automatic spindle calibration and the glass pane being pressed, the machine itself determines the thickness of the glass to be drilled... Ijdpfx Aed S Uhqsdhsth

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2021, Fungsionalitas: berfungsi sepenuhnya, berat benda kerja (maks.): 50 kg, tinggi benda kerja (maks.): 900 mm, panjang benda kerja (maks.): 2.600 mm, kedalaman pengeboran: 25 mm, kecepatan spindel (maks.): 24.000 rpm, TECHNICAL DETAILS Workpiece Dimensions Length min: 200 mm Length max: 2,600 mm Height min: 35 mm Height max: 900 mm Thickness min: 8 mm Thickness max: 60 mm Maximum panel weight: 50 kg Length with extension: max. 3,200 mm Drilling Head Unit BH17 Vertical chucks: 10 Horizontal double chucks: 3 Circular saw blade diameter: 120 mm Max. working depth: 25 mm Saw blade thickness: 4 mm Rotation: clockwise Electrospindle Power at 12,000 – 15,000 rpm (S1): 5.5 kW Speed range: 1,000 – 24,000 rpm Rotation: clockwise Itodpfx Adsw Hqrkshjh EQUIPMENT BSolid Software – 3D CAD-CAM design software (simulation and management of processes for machining and drilling centers, option to select additional modules for extended functions according to production requirements) Note: Disassembly and loading can be offered by a Biesse service partner for €2,000.

Tahun pembuatan: 1985, Kondisi: bekas, Spindle diameter: 110 mm X-axis travel: 900 mm Y-axis travel: 600 mm Z-axis travel: 200 mm Table length: 1,020 mm Table width: 860 mm Spindle taper: MK 40 Table size approx.: 1,020 x 860 mm Maximum table load: approx. 800 kg Itsdpfx Ast Hwyxjdhsh Maximum longitudinal table travel (X): 900 mm Maximum transverse headstock travel (Y): 600 mm Maximum spindle stroke (Z): 200 mm Maximum cross-rail vertical adjustment (W): 635 mm Vertical clearance between table/spindle: max. 15 - 850 mm Distance between columns: 950 mm Spindle diameter: 110 mm Spindle taper internal/external: ISO 40 18 spindle speeds: 10 - 2,500 rpm Infinitely variable milling feed, table: 1 - 6,000 mm/min 4 milling feeds, headstock: 30 - 180 mm/min 6 drilling feeds: 0.01 - 0.39 mm/rev Positioning accuracy for all 3 axes (as new): 0.003 mm Rapid traverse table/headstock slide/cross rail: 6,000 mm/min Spindle drive power: 6.2 kW Total drive power: approx. 15 kW - 380 V - 50 Hz Machine weight: approx. 9,000 kg Accessories / Special features: - 3-axis CNC control, make: BOSCH MICRO 8, with screen, program input manually, via cassette, and via interface - Digital display for Z-axis - Separate control cabinet, various tools - Oil cooler for spindle lubrication, etc.

Kondisi: bekas, WEBSTER & BENNETT EV 36” MESIN BOR VERTIKAL KECEPATAN TINGGI PEMBUAT: WEBSTER & BENNETT, BUATAN INGGRIS MODEL: EV 36” DIAMETER MEJA: 915 mm SWING: 1168 mm Iodpfx Adexp Na Nshsth TINGGI DI BAWAH REL: 533 - 1016 mm KECEPATAN: 13,5 - 300 rpm LAJU PENGUMPAN: 0,005-0,250 inci/menit DAYA UTAMA: 40 HP PLUS: MEJA KECEPATAN TINGGI MESIN SERI EV REL YANG DAPAT DIANGKAT PELINDUNG KEAMANAN SET RAHANG FUNGSI PENUH SLIDE DALAM KONDISI BAIK

Kondisi: bekas, Camam bor vertikal dengan 2 spindel Itsdpfx Adjyg Ix Tshsh

Kondisi: bekas, Comec FM/OV2000 CAF Horizontal and Vertical Boring Machine with Vertical Saw Units. - 3 vertical saw units Itjdpfxet Hzhts Adhjh - 2 vertical boring heads - 2 horizontal boring heads - 2 end boring heads - Plus 1 extra spindle