Beli Buchholz Of375 bekas (35)

Kondisi: bekas, Hydraulic power unit, hydraulic pump, hydraulic motor - Hydraulic power unit sourced from a Jungheinrich electric forklift - 2x drive motors - Filter - Control valve - Hydraulic tank: 930/400/H360 mm - Dimensions: 1000/400/H800 mm - Weight: 288 kg Gjdpjb Uht Aefx Agrouc

Tahun pembuatan: 2012, Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Very good technical condition, tested. This means the devices are calibrated and perform 100% full measurements, heated regularly at least once a month for 12 hours. Possibility to perform transformer oil testing on-site – with a previously checked oil sample for result comparison, as seen in the photos. The MYRKOS chromatograph performs analysis of dissolved gas concentrations in insulating oil (DGA). It enables early detection of developing faults in power transformers and other devices containing insulating oils (such as reactors and instrument transformers). It also allows analysis of gas extracted from a Buchholz relay! The MYRKOS chromatograph is highly accurate, compact, and provides full coverage for critical dissolved fault gas concentrations in oil. A gas calibration standard (cylinder with calibration gas) ensures measurement consistency with concentration standards. Before every measurement, device calibration and functional testing are always performed. A special shake syringe (included in the set) ensures the correct volume ratio. An excellent solution for oil laboratories in power plants and research institutions serving industrial and utility power sectors. Supplied with PPMReport software, including a Polish language version. Features built-in diagnostic tools: Duval Triangle and Rogers Ratios. Used by power utilities, system operators, and laboratories servicing industrial and utility power sectors. The field version includes a special pressurized carrier gas (helium 99.999% purity) tank. Supplied with shake syringes for preparing extraction gas pads, calibration syringes, and air test syringes. TECHNICAL SPECIFICATIONS: Number of gas types: 9 (Hydrogen H2, Methane CH4, Ethane C2H6, Ethylene C2H4, Acetylene C2H2, Carbon monoxide CO, Carbon dioxide CO2, Oxygen O2, Nitrogen N2). Dissolved gas concentration measurement range in oil: H2: 5–60,000 ppm; other gases: 1–60,000 ppm; O2: 60–100,000 ppm; N2: 500–100,000 ppm. TECHNICAL DESCRIPTION: Gas chromatograph for Dissolved Gas Analysis (DGA) of insulating oils for field and laboratory use. The laboratory version includes a shaker. The MYRKOS chromatograph measures concentrations of dissolved gases in insulating oils (DGA), enabling early detection of faults in power transformers and other equipment containing insulating oil (reactors, instrument transformers). Also allows analysis of gases taken from Buchholz relays. The MYRKOS chromatograph is extremely accurate, compact, and ensures full coverage for critical dissolved fault gas concentrations. Gujdpjzcmblsfx Agroc Very good condition. We have two identical devices, both fully functional. When purchasing both, the price per unit is reduced by 50%. Before purchasing, we recommend viewing and testing the equipment on-site (conducting a test). The last test was carried out on 21.11.2025 and compared with another Myrkos device (test performed in a certified laboratory). Available for viewing in Rzeszów.

Tahun pembuatan: 2026, Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, lebar kerja: 400 mm, jenis penggerak: Direktgetriebe, diameter corong: 400 mm, daya nominal: 7,5 kW (10,20 hp), jumlah bilah: 33, kecepatan rotasi (maks.): 150 rpm, diameter rotor: 300 mm, lebar rotor: 400 mm, perforasi ayakan: 6 mm, Direktantrieb über Getriebemotor Gusdpfx Aon Hqxfjgrec

Tahun pembuatan: 2026, Kondisi: baru, Slow-speed beside-the-press granulator Rotor diameter (mm): 180 Rotor width (mm): 180 Rotor speed (min⁻¹): 150 Drive power (kW): 3 Gedoqmik Ijpfx Agreuc Number of rotor blades: 18 Number of stator blades: 2 Screen perforation (mm): >5 Weight approx. (kg): 140 The slow-speed beside-the-press granulators of the GSL series are mainly used in injection molding and blow molding applications for inline size reduction of sprues and defective parts. With a range of hopper and extraction systems, these machines can be integrated flexibly into existing installations. GSL 180 For the size reduction of sprues from injection molding and blow molding operations Key features of the GSL series: - Low noise operation due to reduced rotor speed, inclined cutting, and multi-layer sandwich-design soundproof hopper - Powerful and efficient drive with branded gearbox - Easy maintenance, cleaning, and blade changes The slow-speed beside-the-press granulators of the GSL 180 series feature a fully enclosed rotor with a diameter of 180 mm. Machines are available with working widths from 120 mm to 430 mm. The rotor is made up of individual discs which are directly connected to the spur gear via an oversized drive shaft, allowing for efficient and low-maintenance power transmission. Material to be granulated may be fed manually, via conveyor belt, or by robot through a generously sized, soundproof sandwich-design hopper. As standard, the granulator is mounted on a low frame with swivel castors. Discharge is via a collection bin located beneath the screen, equipped with a pipe connection for a suction conveyor. Applications The slow-speed beside-the-press granulators of the GSL 180 series have been specifically designed for the size reduction of sprues from injection molding and blow molding processes. The granulators are easily accessible, allowing for quick color and material changes. The low rotor speed also enables processing soft as well as hard materials and ensures consistently high regrind quality with minimal fines.

Kondisi: baru, Tahun pembuatan: 2026, Fungsionalitas: berfungsi sepenuhnya, diameter rotor: 250 mm, lebar rotor: 450 mm, Optimisation of an Established Concept. Size Reduction of Large Blow-Moulded Parts as well as Start and End Pieces In a compact redesign, the best features of the proven GST and GSC series have been integrated, with particular emphasis on weight, handling, and energy efficiency. These compact granulators are fully soundproofed, ensuring extremely quiet operation. The granulators are available with a 250 mm rotor diameter and widths of 300, 450, and up to 600 mm. The curved rear wall of the cutting chamber ensures aggressive material infeed and prevents material blockages. As with all ZERMA granulators, the rotor and stator knives can be adjusted outside the machine, minimizing downtime during maintenance. The strongly tangential, curved rear wall of the cutting chamber, in combination with the aggressive open rotor design, ensures reliable material intake and minimizes the risk of blockages. These compact granulators are ideal for use in blow moulding operations. They are suitable for recycling large parts such as bottles, canisters, and crates. Thanks to their low feed height, the machines can be easily fed by hand or with a small conveyor belt. The low noise emission and compact footprint make these granulators the perfect solution for inline size reduction. 98T8Mrx Optional Rear Wall with Raised Stator Knife — M Version: The infeed method with a raised stator knife is better suited for processing thicker-walled and more compact parts, such as injection moulded components, profiles, and sheets. Thanks to the cutting geometry and reduced aggressiveness of the rotor, high-quality regrind can be achieved regardless of the material type or form, such as injection moulded parts, profiles, or sheets. Gusdpfet Aagajx Agrsc Control System and Switch Cabinet: The integrated control and operator console not only conforms to all relevant safety regulations, but can also be customised to specific requirements. In addition, peripheral devices such as feed conveyors, metal detection, and discharge systems can be seamlessly integrated into the machine’s control system. For increased efficiency, an optional intelligent energy-saving function is available, which reduces power consumption during idle periods and can automatically start and stop the system based on the status of upstream machines. Standard configuration with blower, 0.37 kW power consumption and 400 mm cyclone Rotor diameter (mm): 250 Rotor width (mm): 450 Drive (kW): 7.5 Number of rotor knives: 3 x 2 Number of stator knives: 2 Screen perforation (mm): > 6 Weight approx. (kg): 700 Feed opening (mm): 380 x 450 Feed opening option M version (mm): 295 x 450

Kondisi: baru, Tahun pembuatan: 2026, Fungsionalitas: berfungsi sepenuhnya, Slow-running auxiliary granulator Rotor diameter (mm): 180 Rotor width (mm): 300 Rotor speed (min⁻¹): 150 Drive (kW): 4 Number of rotor blades: 30 Number of stator blades: 2 Screen perforation (mm): >5 Guodpfjyzrfusx Agrjc Weight approx. (kg): 180 The slow-running auxiliary granulators of the GSL 180 series feature a rotor diameter of 180 mm and working widths from 120 to 430 mm. The rotor is driven directly by a gear motor. The low rotor speed ensures a pleasant noise level and optimal regrind quality. The special rotor knives can be resharpened multiple times, eliminating the need for complicated adjustment work. The granulators are loaded via a noise-reducing hopper in sandwich construction. Depending on the application, the machines can be equipped with different hopper variants. Optional low and high base frames are available. The regrind is extracted accordingly or discharged into bags or a plastic container. Easy and quick maintenance is guaranteed by the Quick Snap quick-release system, which provides excellent accessibility.

Kondisi: baru, Tahun pembuatan: 2026, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: TH GST 4060 2411 001, berat keseluruhan: 1.650 kg, diameter rotor: 400 mm, jumlah bilah: 6, lebar rotor: 600 mm, daya: 22 kW (29,91 hp), The compact inline granulators of the GST series are designed for use in injection molding and blow molding operations. They are suitable for recycling, for example, voluminous items such as bottles, canisters, crates, sprues, and injection-molded parts. Thanks to their low feed height, the machines can be conveniently loaded with material either by hand or with a small conveyor belt. Low noise emissions and a minimal footprint make the GST series the perfect solution for inline size reduction. All machines in the GST series feature a compact, sound-insulated housing and a sound-dampened feed hopper. The feed hopper can be opened and closed with a gas strut. The compact granulators are available with two rotor diameters (250 mm, 400 mm) and rotor widths ranging from 300 to 1000 mm. The smaller machines are equipped with an open F-rotor, while the larger models feature the heavier S-rotor. The curved rear wall of the cutting chamber ensures aggressive material intake and prevents material blockages. Due to the modular design of the granulator, it can be easily upgraded with additional options, such as exchangeable wear plates. As with all ZERMA granulators, the rotor and stator knives are adjustable outside the machine, minimizing downtime during maintenance. The adjustment gauge is included in the scope of delivery. The control cabinet is securely mounted externally on the sound enclosure, with all wiring routed internally within the unit. Rotor diameter (mm): 400 Rotor width (mm): 600 Drive power (kW): 22 Rotor knives (rows): 3 x 2 Stator knives (rows): 2 Screen perforation (mm): > 8 Godey Dgpmspfx Agreuc Cutting chamber (mm x mm): 400 x 600 Weight (approx. kg): 2000

Kondisi: bekas, Tahun pembuatan: 1978, 10 MVA oil transformer, TuR Dresden, 30 / 10.5 kV with tap changer (19 steps), vector group YNyn0, equipped with conservator tank, Buchholz relay, air dryer, cooling fans, dial thermometer, year of manufacture 1978. Gedot Akl Hjpfx Agrsuc

Kondisi: bekas, Tahun pembuatan: 1985, Fungsionalitas: berfungsi sepenuhnya, Transformator oli 3150 kVA, 20500V – 5 tap/6600V, dengan tangki ekspansi, relay Buchholz, termometer jarum, Dyn5, tahun pembuatan 1985, merek Asea Lepper, tipe DOHH Gujdjw In Htspfx Agroc

Kondisi: baru, nomor mesin/kendaraan: G-CL-270-FN-EC-EX, Fungsionalitas: berfungsi sepenuhnya, tegangan masuk: 230 V, laju aliran volumetrik: 270 m³/jam, tingkat kebisingan: 61 dB, tinggi total: 755 mm, panjang total: 400 mm, lebar total: 500 mm, berat keseluruhan: 60 kg, ISI G-CLEANER - ATEX Mechanical Air Filtration Unit (without intake plate / to be specified separately) Model: 270 FN Version: Mobile Control: None ATEX: "e" II 3 G Zone 2 Guedpfevrykhox Agrsc Horizontal, mobile mechanical air cleaner with EC centrifugal fan for gas separation in EX zones. TECHNICAL DESCRIPTION: Air volume: - 320 m³/h (free blowing) - 240–270 m³/h (effective) (depending on filter configuration, without extraction elements) Air inlet: Exhaust silencer at the rear (optionally 1x100 mm / 2x80 mm / 4x50 mm) Filter configuration: - Coarse aluminum mesh filter - Z-line filter F9 - Activated carbon cassette with compressed, specially impregnated shaped carbon ATEX: Group II Gas/dust Fan: according to ATEX II 2G Exh IIB T4 Gb Temperature class: T4 >135°C Fan: Device category 2 Filter system: Device category 3 All electrical components supplied in explosion-proof design. Color: RAL 7035 light grey (optional: special color) Voltage: 230 V Frequency: 50 Hz Protection class: IP54 Fan technology: energy-efficient EC technology Air output: not adjustable Sound level: 61 dB(A) Dimensions: Length 400 mm / Width 500 mm / Height 755 mm Weight: 60 kg

Kondisi: baru, tegangan masuk: 230 V, jenis arus masuk: AC (pendingin udara), laju aliran volumetrik: 1,6 m³/jam, tinggi total: 20.000 mm, panjang total: 5.500 mm, lebar total: 6.600 mm, berat keseluruhan: 130 kg, Perlengkapan: Pelat tipe tersedia,

Kondisi: baru, nomor mesin/kendaraan: S-CL-100-FN-EC, Fungsionalitas: berfungsi sepenuhnya, tegangan masuk: 230 V, laju aliran volumetrik: 134 m³/jam, tinggi total: 475 mm, panjang total: 250 mm, lebar total: 250 mm, berat keseluruhan: 17 kg, Perlengkapan: Pelat tipe tersedia, isi-s-cleaner-mechanical-air-filter-device-(solder-fume)-for-up- to-1-workstation-type:-100-fn-design:-semi-mobile-(glide-skids/no -casters)-control:-none-horizontal,-semi-mobile-mechanical-air-cl eaner-with-ec-radial-fan-for-separating-solder-fumes.-technical-d escription:-airflow:-134-m³/h-(volumetric-flow)-100-m³/h-(effecti ve-air-capacity)-(depending-on-filter-configuration,-without-capt ure-elements)-intake-nozzle:-nw-50-mm-(rear)-filter-equipment:-pr e-filter-hepa-filter-h13-refillable-activated-carbon-cartridge-co lour:-ral-7035-light-grey-voltage:-230-v-frequency:-50-hz-protect ion-class:-ip54-fan-technology:-energy-saving-ec-technology-airfl ow-capacity:-not-adjustable-dimensions:-length-250-mm-/-width-250 -mm-/-height-475-mm-weight:-16.5-kg Gsdpfxewpu Tws Agrjuc

Kondisi: baru, nomor mesin/kendaraan: G-CL-350-FR-EC, tegangan masuk: 230 V, laju aliran volumetrik: 350 m³/jam, tingkat kebisingan: 61 dB, tinggi total: 600 mm, panjang total: 430 mm, lebar total: 340 mm, berat keseluruhan: 40 kg, ISI G-CLEANER Mechanical Air Filtering Unit Model: 350 FR Design: Mobile Control: None Horizontal, mobile, mechanical air cleaner with EC radial fan for the removal of gaseous substances. TECHNICAL DESCRIPTION: Air volume: - 390 m³/h (freeblowing) - 350 m³/h (effective) (depends on filter configuration, without capture elements) Air intake: Rear, top side, with 4 connections, 50 mm each Filter configuration: - Pre-filter mat F5 - HEPA filter H13 according to DIN EN 1822-1 - Activated carbon cassette with 9 kg of specially impregnated pressed shaped carbon Colour: RAL 7035 light grey (special colour available on request) Voltage: 230 V Frequency: 50 Hz Protection rating: IP54 Gusdpfxovrygpj Agrjc Fan technology: energy-efficient EC technology Air output: adjustable Noise level: 61 dB(A) Dimensions: Length 430 mm / Width 340 mm / Height 600 mm Weight: 40 kg

Kondisi: baru, nomor mesin/kendaraan: D-CL-440-FR-EC, Fungsionalitas: berfungsi sepenuhnya, tegangan masuk: 230 V, laju aliran volumetrik: 450 m³/jam, tingkat kebisingan: 58 dB, tinggi total: 1.430 mm, panjang total: 450 mm, lebar total: 550 mm, berat keseluruhan: 50 kg, Perlengkapan: Pelat tipe tersedia, kecepatan rotasi dapat diubah tanpa batas, en ISI D-CLEANER Mechanical Air Filtration Unit (Dust) Gedpfx Ajvrxc Ajgreuc Type: 440 FR Version: Mobile Control: None Horizontal, mobile, mechanical air purifier with EC radial fan for dust separation. TECHNICAL DESCRIPTION: Airflow: - 450 m³/h (free blowing) (depends on filter equipment, without extraction elements) Air Inlet: Baffle plate as pre-separator Suction Nozzle: 100 mm (left side) Filter Equipment: - Filter cartridge (dust class M according to DIN EN 60335-2-69, Annex AA) - Compressed air cleaning via rotary wing nozzle Colour: RAL 7035 light grey (optional: special colours) Voltage: 230 V Frequency: 50 Hz Protection Class: IP54 Fan Technology: energy-saving EC technology Airflow: adjustable Noise Level: 58 dB(A) Dimensions: Length 450 mm / Width 550 mm / Height 1430 mm Weight: 50 kg

Kondisi: baru, nomor mesin/kendaraan: S-CL-250-FN-EC, Fungsionalitas: berfungsi sepenuhnya, tegangan masuk: 230 V, laju aliran volumetrik: 250 m³/jam, tinggi total: 600 mm, panjang total: 340 mm, lebar total: 430 mm, berat keseluruhan: 35 kg, Perlengkapan: Pelat tipe tersedia, ISI S-CLEANER Mechanical Air Filtration Unit (Solder Fume) for up to 2 Workstations Type: 250 FN Version: Mobile Control system: none Horizontal, mobile mechanical air cleaner with EC centrifugal fan for extracting solder fumes. TECHNICAL DESCRIPTION: Air volume: - 240 m³/h (volumetric flow) - 170 m³/h (effective air output) (depends on filter configuration, without extraction elements) Gsdpfxsvrylfe Agrouc Intake nozzles: 2 x NW 50 mm (rear) Filter configuration: - Pre-filter G4 - HEPA filter H13 - Activated carbon cassette (2.5 kg, refillable) Colour: RAL 7035 light grey (special colours available on request) Voltage: 230 V Frequency: 50 Hz Protection class: IP54 Fan technology: energy-efficient EC technology Air output: not adjustable Dimensions: Length 340 mm / Width 430 mm / Height 600 mm Weight: 35 kg

Kondisi: baru, nomor mesin/kendaraan: C-CL-360-FR-EC, Fungsionalitas: berfungsi sepenuhnya, tegangan masuk: 230 V, laju aliran volumetrik: 390 m³/jam, tingkat kebisingan: 58 dB, tinggi total: 1.190 mm, panjang total: 900 mm, lebar total: 550 mm, masa garansi: 12 bulan, Perlengkapan: Pelat tipe tersedia, en-ISI C-CLEANER Mechanical Air Filtration Unit Model: 360 FR Version: Mobile Control: None Horizontal, mobile mechanical air purifier with EC centrifugal fan for the separation of gases and particulates. TECHNICAL DESCRIPTION: Airflow: - 390 m³/h (free blowing) - 360 m³/h (effective) (depends on filter configuration, without extraction elements) Air inlet: with baffle plate serving as pre-separator Filter configuration: - Filter cartridge made of polyester fleece (dust class M) - G4 pre-filter mat - H13 HEPA filter - Refillable activated carbon cassette (3 kg) To ensure consistent suction performance, the filter cartridge can be cleaned at regular intervals using compressed air via a ball valve. Color: RAL 7035 light grey (special colors optional) Voltage: 230 V Frequency: 50Hz Protection class: IP54 Fan technology: energy-saving EC technology Airflow: adjustable Guedpfx Aevrw T Hogrec Noise level: 58 dB(A) Dimensions: Length 900 mm / Width 550 mm / Height 1190 mm

Kondisi: bekas, Tahun pembuatan: 2012, 3268 Cutting and Processing Center Schirmer BAZ 1000-G6 / VU "Basic" Used, Year of manufacture 2012 Comprising: - Cutting and Processing Center Schirmer BAZ 1000-G6 / VU "Basic" - Steel Cutting Automatic Saw Schirmer SZA 450 - Buffer Screwdriving Station Schirmer - Bar Processing Center Schirmer SBZ I Cutting and Processing Center Schirmer BAZ 1000-G6 / VU "Basic" - Cutting length: 300–3900 mm - Fully automatic loading magazine for 9 profiles up to max. 6500 mm length - Automatic transfer station - Infeed device for PVC profiles up to 6500 mm with NC-positioned gripper, positioning speed up to 150 m/min - Profile length measuring device including optimization software - Automatically adjustable profile guides - Processing station as G-module "Ultra Speed" design Processing operations on PVC profiles: - Drainage and ventilation slots/holes in frame, sash, and mullion profiles; handle olive drilling for entrance doors; lock strike marking; mortise lock case routing - Height measuring unit for detecting profile tolerances - Gasket cutting device - VU saw unit with double saw aggregate, 2x 45° - Standard saw unit with 1 saw aggregate, pivot range +45° to -45° - Conveyor belt for waste removal - NC-controlled gripper for bar outfeed, positioning speed up to 180 m/min - PC machine control: 7-slot ATX industrial PC, Microsoft Win XP Prof., Software: TwinCAT NCI - Horizontal circulation buffer for transferring profiles to the steel infeed station and screwdriving station for steel insertion station with 8 loading positions - Monitor as steel length display - Automatic label printer Steel Cutting Automatic Saw Schirmer SZA 450 - Automatic loading magazine, max. profile length 6000 mm, profile width 25–50 mm, profile height 15–60 mm, wall thickness max. 4 mm - Infeed device - Standard saw unit for 90° cuts - Automatic bar outfeed - Belt conveyor - Extraction device - Steel offcut processing - Steel length measurement in the steel loading magazine Buffer Screwdriving Station Schirmer - Infeed device for PVC profiles up to 3900 mm length - Automatically adjustable profile guides - Screwdriving station - Steel insertion fingers for reinforcement profiles up to 200 mm insertion depth Bar Processing Center Schirmer SBZ I - Infeed device for PVC profiles up to 3900 mm length - Automatically adjustable profile guides - Measuring probe for automatic determination of the zero point at profile start - Drilling station with 4-axis CNC control: 2 vertical axes, 1 horizontal axis, 1 axis for X-feed - NC-controlled gripper for bar outfeed - Special design belt conveyor for cross ejection - Lock part visualization software including monitor Gsdey Nnnnspfx Agrjuc - Screwdriving station with screw feed - Helmet rail with balancer for bar screwdriving unit - Bar screwdriving unit with automatic screw feed System output: Approx. 120 window units 1400 x 1500 mm / 8 hours If the machine is upgraded with an additional screwdriving unit at the buffer screwdriving station, output increases to approx. 160 units / 8 hours Offered on behalf of customer, ex location near 30625 Hannover, without dismantling, transport, or installation. To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment. No warranty or liability for used machines; sale as inspected.

Kondisi: bekas, Tahun pembuatan: 1979, Transformator daya 31,5 MVA, 110 kV / 10,5 kV dengan tap changer (19 tingkat), dilengkapi ekspansion tank, relay Buchholz, pengering udara, grup sambungan Yy0, buku manual trafo tersedia. Gusdsrk Nrtopfx Agrsc

Kondisi: siap digunakan (bekas), Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2023, jam operasional: 7.006 h, kapasitas silinder: 7.960 cm³, torsi: 1.403 Nm, daya nominal: 180 kW (244,73 hp), RINCIAN TEKNIS Kapasitas silinder: 7,96 l Daya nominal: 180 kW (245 HP) pada 1.800 rpm Torsi maksimum: 1.403 Nm pada 1.150 rpm RINCIAN MESIN Jam operasional: sekitar 7.006 jam PERLENGKAPAN Diferensial pengunci otomatis pada kedua gardan Rem cakram basah di kedua gardan Guedsyarufopfx Agrjc Kontrol traksi elektronik untuk kondisi medan sulit Sistem rem kombinasi inching Pendinginan sesuai kebutuhan Transmisi XPower stepless dari 0 hingga 40 km/jam Rem kerja bebas aus melalui pengunci otomatis penggerak XPower Kotak peralatan terkunci dengan seperangkat alat Monitor area belakang (dengan kamera Liebherr pada layar Liebherr) 4 lampu kerja terintegrasi di bagian belakang kap mesin

Tahun pembuatan: 1990, Kondisi: diremajakan ulang (bekas), Our top seller! Guedpfe A Nbvjx Agrsc Extremely dynamic short-circuit strength, making it excellently suited for robust industrial applications with high switching frequencies, electrical loads, and harmonic content. Rigid tank construction. Reduced losses (Po/Pk between B-A' and A-C'). Available with Elastimold outside cone plug-in bushings, and, of course, also with porcelain bushings for both high-voltage and low-voltage sides. The transformer is always equipped with a dial thermometer with two contacts and a dragging pointer, and is optionally available with DGPT2 full transformer protection. Expansion vessel version with double-float Buchholz relay possible. Delivery series of up to 35 units possible. 12 months warranty.

Tahun pembuatan: 2021, Kondisi: baru, Air filter for indoor air purification of aerosols such as viruses, bacteria, pollen, and dust ISI AIR CLEANER – adjustable up to 1600 m³/h – 230 V – for large rooms up to 160 m³ Airflow rate: adjustable up to 1600 m³/h Room size: suitable for up to 160 m³ Power consumption: 69 – 209 W Operating voltage: 230V 50/60Hz, 5m connection cable with Schuko plug (EU4) (plug & play) Noise level*: 38.2 – 48.1 db(A 1 m) Dimensions L/W/H in mm: L 550 / W 660 / H 2000 Colour: Base: RAL 7016, Top: RAL 7035 Weight: 130 kg Manufacturer: ISI Industrieprodukte GmbH Scope of delivery: 1 unit ISI AIRCLEANER FT1 1 unit fine dust filter, ISO 16080 ePM1-90% 1 unit HEPA filter H14, EN1822 Delivery condition: ex works Buchholz (Westerwald), packaging only, immediately available Gedpfx Aeh Rfcnogreuc Application: Air purifiers have only recently become widely known due to the coronavirus pandemic. However, air purifiers are generally recommended even outside of a pandemic, as they can noticeably improve air quality. Seasonal pathogens, such as influenza in the colder months, remain present after the pandemic. People with asthma and allergies benefit from the filtration of pollen and other allergens by using an air purifier throughout the year. Functionality: The room air is drawn in at the bottom of the filter unit. In the pre-filter section, the air is freed from dust and larger particles. A subsequent, high-efficiency HEPA H14 filter system then removes up to 99.995% of particles or aerosols, which may contain pathogens, from the air. Your benefits: - Highly efficient EC fan as standard - Adjustable speed and airflow rate - Long service life and easy filter replacement - Low noise emission - Separation efficiencies up to 99.95% - Quality made in Germany

Kondisi: baru, Suction capacity at nozzle (filter unit)*: 2,600 m³/h (free-blowing) Total power consumption*: 0.62 kW Operating voltage: 400 V, 50/60 Hz, 3Ph+PE Noise level*: 66 dB(A) Dimensions L/W/H in mm: L 1160 / W 508 / H 545 Colour: RAL 7035 Weight: 111 kg Manufacturer: ISI Industrieprodukte GmbH *Depending on filter configuration Gujdpopkwauofx Agroc Special voltages and colours available on request OPTIONAL: With pre-filter package Use case: Extraction of oil mist, emulsion mist (for emulsions with higher oil content) and smoke, suitable for small to very large machine workspaces | Oil mist separator Your advantages with the ELBARON series: - 18 device variants available - Direct from the manufacturer - ISI-TRONIC optionally available (digital filter control) - Electronically regulated EC fan as standard - Adjustable speed and air flow rate - Available in simplex (single-stage) or duplex (two-stage) versions - Wide range of air flow capacities - Can be adapted to pollutant load and required air flow - Wide range of installation and connection accessories - Quality Made in Germany We developed the ELBARON® filter series specifically for use in metalworking applications with pure oil and for the separation of oil mist and smoke (oil mist separators). For many years, the digital electrostatic air filters of the ELBARON® series have counted among the highest-performance filter units on the market and are in use worldwide. Our filter units are already optionally digitalised and can, for example, be controlled via laptop. The ELBARON® series comprises 18 device variants and can be optimally configured to your requirements in terms of size and performance. ELBARON® units are distinguished by long service life and absolute operational reliability. Our electrostatic filter cells are dimensioned to ensure maximum filter efficiency, service life, and trouble-free operation with optimal economic efficiency.

Tahun pembuatan: 2021, Kondisi: baru, ebmpapst EC radial module, backward-curved, single-sided intake, with support spider Type: K3G250-PR04-H2 Motor: M3G084-DF Phase: 1~ Rated voltage: 230 VAC Voltage range: 200 - 277 VAC Frequency: 50/60 Hz Data determination type: ml Speed: 3080 min-1 Gujdpfx Agsi D Ei Aerec Power input: 500 W Current consumption: 2.3 A Min. ambient temperature: -25°C Max. ambient temperature: 40°C The fans are new, in original packaging, 18 units per pallet, from production year 10/2021. Several pallets are available. Including packaging ex works 53567 Buchholz (Westerwald), Germany. We are happy to organize freight. Please inquire about freight costs, indicating your destination.

Kondisi: baru, Tahun pembuatan: 2023, Extraction capacity at connection*: 2,600 m³/h (free suction) Total power consumption*: 0.62 kW Operating voltage: 400 V, 50/60 Hz, 3Ph+PE Noise level*: 65 dB(A) Gsdpoh Rdxnofx Agrjuc Dimensions L/W/H in mm: L 9755 / W 508 / H 545 Colour: RAL 7035 Weight: 90 kg Manufacturer: ISI Industrieprodukte GmbH *Depending on filter configuration Special voltage or special colour on request OPTIONAL: With pre-filter package Application: Extraction of oil mist, emulsion mist (for emulsions with higher oil content) and smoke; suitable for small to very large machine workspaces | Oil mist separator Your advantages of the ELBARON series: - 18 device variants available - Direct from the manufacturer - ISI-TRONIC optional (digital filter control) - Electronically controlled EC fan as standard - Adjustable speed and air output - Available as Simplex (single-stage) or Duplex (two-stage) - Wide range of air output options available - Adaptable to pollutant load and air output requirements - Extensive range of installation and connection accessories - Quality Made in Germany We developed the ELBARON® filter series for machining applications using pure oil, and for the separation of oil mist and smoke (oil mist separators). For many years, the digital electrostatic air filters in the ELBARON® series have been among the most efficient filter units on the market and are in use worldwide. Our filter units are already optionally digitised and can, for example, be controlled via laptop. The ELBARON® device series comprises 18 device variants and can be optimally configured for your specific application regarding size and performance. ELBARON® units impress with long service life and total operational reliability. Our electrostatic filter cells are designed to achieve the best possible filtration efficiencies, service life, and trouble-free operation from an economic perspective.

Kondisi: baru, Absaug capacity at connection*: 980 m³/h Total power consumption*: 0.71 kW Operating voltage: 400 V, 50/60 Hz, 3Ph+PE Gusdpjh Rfbqofx Agrjc Noise level*: 68 dB(A) Dimensions L/W/H in mm: L 1290 / W 345 / H 595 Colour: RAL 7035 Weight: 79 kg Manufacturer: ISI Industrieprodukte GmbH *Depending on filter configuration Special voltages and colours available on request Application: Separation of emulsion mist, suitable for medium to very large machine workspaces. Your advantages with the COBARON series: - 15 device variants available - Directly from the manufacturer - ISI-TRONIC included as standard (digital filter control) - Electronically regulated EC fan as standard - Adjustable fan speed and air flow - Available with a variety of filter combinations - High-quality filter media in both pre-filter and main filter stages - Separation efficiency up to 99.95% - Comprehensive range of installation and connection accessories - Flexible adaptation to various applications - Optimised service life - Quality made in Germany With COBARON, we offer a filter system that meets the diverse machining requirements and the associated pollutant profiles of today. Even in the standard programme, the COBARON combination filtration system offers different filter combinations and can be configured for a wide range of applications. The various expansion stages of the COBARON series are specifically designed for applications that represent borderline cases for many filter systems (mechanical or electrostatic). Combining both proven filter principles in the appropriate application increases filtration performance and extends service life. COBARON can be operated as a purely mechanical filter unit with different filter stages, or additionally configured with an electrostatic filter cell. Our filter units are already fully digitalised as standard, and can be controlled (for example) via laptop.