Beli Christmann & Pfeifer Kg Hpk I bekas (95.454)

Kondisi: bekas, Tahun pembuatan: 1984, kapasitas angkut: 3.200 kg, Saat ini masih tersedia 3 unit di stok. Derek Girder Tunggal Semi-Portal Produsen: Christmann & Pfeifer KG Unit angkat: Demag Tipe: PLV 168 NF Kapasitas angkat: 3.200 kg Under carriage: Demag Tipe: 13/6PF 12/4 Jarak kait yang dapat digunakan: 4.800 mm Jarak antara pusat rel: 8.110 mm Dcodpfxjw Ugu As Aiush Berat: sekitar 2 ton/unit Harga per unit, siap muat. Derek sudah dibongkar dan dikemas siap kirim. Mesin dapat dilihat langsung di lokasi. Semua data tanpa jaminan. Penjualan diutamakan untuk yang lebih dulu membeli.

Kondisi: baik (bekas), Tahun pembuatan: 2005, jam operasional: 15.606 h, Fungsionalitas: berfungsi sepenuhnya, gaya penekanan: 50 t, lebar bukaan pengisian: 1.050 mm, panjang bukaan pengisian: 1.250 mm, panjang bal: 1.200 mm, lebar bal: 1.100 mm, tinggi bal: 700 mm, berat bal: 500 kg, daya: 30 kW (40,79 hp), laju aliran volumetrik: 160 m³/jam, Good day, Djdpfxsyplwfo Aiuoch We hereby offer you, without obligation, a used baling press from the manufacturer Presto GmbH & Co. KG, model HPK 50 B. The following technical data has been taken from the manufacturer's operating manual and brochures, for which we cannot guarantee accuracy or completeness. Manufacturer: Presto GmbH & Co. KG Model: HPK 50 B Year of manufacture: 2005 Operating hours: 15,606 hours Main press force: 50 t Drive power: 30 kW Total connected load: 31.5 kW Rated current: 64 A Throughput under operating conditions with a bulk density of 60 kg/m³: approx. 6.7 t/hour Machine weight (press): 12.5 t Note: The machine has been serviced in our workshop (main control valve on hydraulic block replaced) and tested in continuous operation, both in manual and automatic mode. The machine documentation is available in German. An inspection of the press is possible in our workshop by appointment. We would be pleased if this machine is of interest to you. Your service team Mertens & Frowein GmbH

Kondisi: baik (bekas), Technical data for the pallet rack beam: Racking system: Dexion Type: Speedlock P90 The scope of delivery includes: 01x Pallet rack beam, used Material colour: orange Beam type: SLI 120|14 S 350 I-profile: 120 x 50 mm Connector: 5 HK (hooks) Clear span: 3,000 mm Maximum load per beam pair: 1,800 kg, with evenly distributed load Dodpfoi E Th Rjx Aiuech The specified compartment loads apply only in combination with upright P90/20. Furthermore, depending on the bay load and insertion heights, the load-bearing capacity of the connector bracket must also be checked. 02x Locking pins, used Finish: fully galvanized For securing the cross beams against unintentional lifting

Kondisi: baik (bekas), Technical data for pallet racking beams: Racking system: Dexion Type: Speedlock P90 (Silverline) Included in the scope of delivery: 01x Pallet racking beam, used Dedpfx Asi E S Ersiuoch Colour: orange Beam type: 125|14 I-section: 125 x 50 mm Connector: 5 hook (clips) Clear span: 3,000 mm Maximum load per pair of beams: 2,100 kg (with evenly distributed load) Note: Stated shelf loads only apply in combination with upright P90/20. Additionally, depending on bay load and beam mounting height, the load capacity of the beam connector must be checked. 02x Locking pins, used Finish: fully galvanized For securing the cross beams against unintentional lifting

Kondisi: baik (bekas), Technical data for pallet racking beam: Racking system: Dexion Type: Speedlock P90 (Silverline) Included in delivery: 01x Pallet racking beam, used Material finish: sendzimir galvanized Beam type: 125|17 I-profile: 125 x 50 mm Connector: 5 hooks Clear width: 3,000 mm Max. load per pair of beams: 2,400 kg, with evenly distributed load Load capacities are valid only in combination with upright P90/20. Furthermore, depending on bay load and hook-in height, the load-bearing capacity of the locking clip must also be checked. 02x Locking pins, used Design: fully galvanized For securing the longitudinal beams against unintentional lifting Dedpfoi E Tb Isx Aiujch

Kondisi: baik (bekas), Technical data for pallet racking beam: Racking system: Dexion Type: Speedlock P90 (Silverline) Included in delivery: 01x Pallet racking beam, used Material colour: orange Beam type: 125|17 I-profile: 125 x 50 mm Connector: 5 HK (hooks) Clear span: 3,000 mm Max. load per pair of beams: 2,400 kg, with evenly distributed load Dcsdji E S Eyspfx Aiujh The stated shelf loads are valid only in combination with upright P90/20. Additionally, depending on the bay load and beam hook-in heights, the load-bearing capacity of the connector bracket must be checked. 02x Locking pins, used Finish: fully galvanized For securing the beams against unintentional lifting

Kondisi: baik (bekas), Technical specifications for pallet rack beam: Racking system: Dexion Dedpji E Tbvsfx Aiuech Type: Speedlock P90 (Silverline) Included in delivery: 01x Pallet rack beam, used Material color: sendzimir galvanized Beam type: 125|14 I-profile: 125 x 50 mm Connector: 5 HK (hooks) Clear span: 3,000 mm Maximum load per pair of beams: 2,100 kg with evenly distributed load Please note: Load capacities apply only in conjunction with upright P90/20. Depending on the bay load and hook-in heights, the load capacity of the beam connector must also be checked. 02x Safety pins, used Design: fully galvanized To secure the longitudinal beams against unintentional lifting

Kondisi: baik (bekas), en-001 Dcedpfx Aei E Thxoiush

Kondisi: bekas, Beam clamp, sheet clamp, plate clamp, beam gripper, sheet gripper, material gripper, profile steel tongs, plate lifter, lifting clamp, lifting gripper -Manufacturer: IP, Safety Lifting Clamp 6 I P -Clamping range: 0 - 40 mm Dcsdegtn Dfjpfx Aiush -Lifting capacity: 6 t -Dimensions: 250/110/H550 mm -Weight: 26 kg

Kondisi: baru, Tahun pembuatan: 2026, Fungsionalitas: berfungsi sepenuhnya, de-01 Dcjdjzbztajpfx Aiujh

Kondisi: sangat baik (bekas), pl-hu-001 Djdpfx Aoy Sifyeiusch

Kondisi: sangat baik (bekas), Dijual hoist rantai listrik merek terkenal Yale model CPVF 10-8 NE. Dodpfx Aeyrh I Eoiujch Perangkat dalam kondisi teknis sangat baik, dilengkapi dengan sistem kendali radio Magnetek (remote + receiver). Spesifikasi teknis: • Model: CPVF 10-8 NE • Kapasitas angkat: 1000 kg • Tahun produksi: 2019 • Daya: 400V / 3 fase • Kecepatan pengangkatan: 2 / 8 m/menit • Pengendalian: remote radio • Kondisi: sangat baik, jejak pemakaian normal

Kondisi: sangat baik (bekas), Essential information: Dedoyw Ua Tspfx Aiuech Type: scissor lift / lifting table Load capacity: 500 kg Condition: used – fully functional Control: remote up/down + EMERGENCY STOP Power supply: 230/400V Year of manufacture: 2012 Price includes: complete set as shown in the photos ⚙️ Technical specifications: Load capacity: 0.5 t (500 kg) Lifting height: approx. 630 mm Motor power: 0.8 kW Operating pressure: 196 bar Weight: approx. 170 kg Table dimensions: approx. 90 x 60 cm Power supply: 3-phase 230/400V Protection class: IP55 🛠️ Description: I am offering a professional hydraulic scissor lift – ideal for workshops, production facilities, and warehouses. The device allows for safe and convenient lifting of heavy components to an ergonomic working height. Equipped with: - sturdy scissor construction - hydraulic lifting system - remote control operation (up/down + emergency STOP) Perfect for: - assembly work - packing - service and production - loading and unloading 📦 Set includes: Scissor lift Hydraulic power unit Remote control 🚚 Shipping: Shipped on a pallet Personal collection possible

Tahun pembuatan: 2018, Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 10044/0218, cz-machinery-lathes-2024 Dcedpfx Aoy S Sz Rjiush

Kondisi: baik (bekas), 25 linear meters of tire racking Used equipment, in very good condition, see pictures Height: 2.5 m Depth: 50 cm Bay load: 9,000 kg Beam length: 2.1 m Beam load capacity per level: 1,000 kg Negotiable price: €1,950 net ex stock Dcodefdik Ispfx Aiueh Offer includes: + 12 assembled frames, 9 t bay load, depth 50 cm, height 2.5 m + 66 beams, length 2.1 m, 1,000 kg load per level + 132 locking pins + 24 concrete anchors + Load capacity signs Alternative configurations available upon request! Goods are in stock. Transport and installation available on request. Inspection possible at any time by appointment. Further information available upon request. Constantly over 5,000 linear meters of pallet racking from numerous manufacturers in stock. (Specifications, details and prices subject to change or error; interim sale reserved! See our terms and conditions, all prices excl. VAT ex stock) Purchase / Sale: We are constantly seeking and offering numerous items from a wide range of sectors: – Broom-clean site clearances – Company liquidations – Fast – flexible – efficient! – We also clear and/or dispose for insolvency administrators. Just email us a few key details and we will get back to you promptly. To visit our page, please click on our logo!

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: M237 026, daya: 1.600 kW (2.175,39 hp), jenis bahan bakar: gas, Tahun pembuatan: 2005, tekanan kerja: 10 batang, 2x gebrauchte Dampfkesselanlage Hersteller: Viessmann Type: M237 026, 2.300 kg/hr Baujahr: 2005 Dampfleistung: 2.300 kg/st Betriebsüberdruck: 10 bar CE 0035 Augerustet mit vorhandenen Armaturen, Weishaupt brenner G8/1-D ZMD, Schaltschrank, Economiser, Automatisch Absalzventil RTK, 2 kesselwasser pumpen etc. Dsdpfjy Tpm Hsx Aiuoch

Kondisi: baru, Tahun pembuatan: 2026, Instalasi penyaring debu yang mudah dirawat, dirancang khusus untuk debu sandblasting yang agresif dengan praseparator ruang benturan, terdiri dari: a) 1 unit filter kering cartridge, tipe PF 2.16.B250 untuk 30.000 m³/jam (ukuran lain tersedia), terdiri dari housing baja 3 mm yang tahan vakum, dibagi menjadi ruang gas mentah dengan cartridge filter, praseparator ruang benturan, dan ruang gas bersih dengan pembersihan filter menggunakan udara tekan, masing-masing dengan pintu perawatan terpisah Easy Open. Corong penampung debu dengan katup celah atau rotary valve untuk pembuangan debu dengan Big Bags. Kontrol katup magnetik dengan indikator tekanan diferensial untuk pengaturan optimal pembersihan cartridge filter. Pintu perawatan model engsel putar untuk kemudahan perawatan. Dcodpew Ivqmefx Aiuoh

Kondisi: hampir baru (bekas), Telah direkondisi secara menyeluruh Harga: 5.500 EUR Mixer adonan spiral Kapasitas: 100 kg tepung 160/180 kg adonan Dodpfox N Ed Tjx Aiujch Diosna Volume wadah: 260 liter Daya listrik: 380V / 50Hz / 3N/PE Dua timer Dua kecepatan Opsi mundur Tutup setengah dengan saklar pengaman Roda dengan rem

Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2026, jenis kontrol: Dikendalikan oleh PLC, jenis aktuasi: listrik, Diameter pipa (maks.): 54 mm, Panjang pipa (maks.): 6.000 mm, Ketebalan dinding tabung (maks.): 4 mm, Sudut pembengkokan (maks.): 195 °, radius pembengkokan (maks.): 250 mm, tekanan (maks.): 250 batang, Perlengkapan: Penandaan CE, henti darurat, kendali jauh kaki, perangkat ganti cepat, sistem pelumasan terpusat, THE ECONOMICAL TUBE BENDING MACHINE FOR TIGHT BENDING RADII: The tube bending machine with a free-standing bending head can be easily converted for complex geometries to perform right- and left-hand bends. Plug-in bending tools allow for quick changeovers to different tube sizes. A rapid hydraulic system to minimize non-productive times is an important factor for series production. The clamping pressure for the tube can be optimally adjusted. The PLC control system (expandable via USB stick) with data storage and the latest X2X interface can accommodate an almost unlimited number of programs storing bending angles, lengths, and rotation angles for up to 50 bending sequences on a single tube length. For monitoring springback values, a freely programmable database for up to 200 materials is available. The machine offers 2 operating modes: In 'Simple Bending', the length and rotation of the arcs relative to each other are displayed automatically. In 'Controlled Bending' mode, the data is pre-set and a continuous setpoint/actual comparison is performed during bending operations. This excludes mispositioning within a tolerance window, effectively minimizing operator errors. General error messages are displayed in plain text on the large screen. The mandrel retraction is programmable and can be automatically activated upon reaching the bending angle. The compact drive unit with removable mandrel support offers benefits for on-site assembly as well as for special constructions with very long tube in-feeds and is also available as a stationary version with a tool and mandrel bar organizing system. A cost-effective alternative to fully controlled CNC machines. POTENTIAL APPLICATIONS: • Hydraulic piping • Pipeline construction • Plant construction, e.g. for the chemical industry • Metal fabrication • Prototype construction Technical Data: • Bending capacity Ø 4 to 50 x 4 mm depending on material • Bending radius min/max: 10mm/140mm • Min. bending radii: 1.5 x Ø (Standard 2 x Ø) • Multifunction machine control with bending angle adjustment (0.1°) • Mandrel support lengths 1500/3000/4500/6000 mm (longer versions available upon request) • Maximum 180º bending result • Weight 800-900 kg (depending on version) • Ergonomic operation via safety foot switch OPTIONAL ACCESSORIES: • Automatic mandrel lubrication (minimal quantity) • Pneumatic or hydraulic quick-change chuck • Length and rotation positioning via automatic brake function or manual stops with foot switch • Automatic positioning of length and rotation via servomotors • Pneumatic rotation stop • Tube calculation software Dcsdpfx Aieng Exajujh • Laser-assisted tool monitoring for clamping force supervision • 10-inch touchscreen with integrated tube calculation • Bending radius up to 250 mm • Data transfer via cable (LAN), wireless (WLAN), or USB OUR ON-SITE SERVICE: • You are welcome to join us for test production at our in-house demo room • Consulting and informational meeting at your site • Consultation and handling of leasing/finance purchase via JUTEC • Trade-in of your existing machine • Service contracts and on-site maintenance

Kondisi: baru, Tahun pembuatan: 2025, PROFIL BENDING ATTACHMENT PB20 The ideal supplement for pipe bending on models 3000 and 6000 is the PB20 profile bending attachment. The device can be mounted quickly and easily onto the bending shaft without the need for tools. The workpiece is clamped onto the rotary table using the clamping device and pulled around the bending tool. With this system, the length of the legs to be bent can be precisely measured in conjunction with a length stop, ensuring repeatable accuracy during bending. Dodpfonh R Eksx Aiusch TECHNICAL DATA: • Bending capacity (Steel 37): 100 x 10 mm, Ø 20 mm • Numerous standard tools available • Special tools possible • Sharp-edge tools with bending radii R2 or 5 mm • Round tools R 10 to 25 mm for bends up to max. 260° (optional) OUR SERVICE: • Welcome to test production in our in-house demo room • On-site consultation and informational meeting at your location • Consultation and processing of leasing/financing purchase via JUTEC • Trade-in of your current machine • Service contracts, on-site maintenance at your facility

Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2025, jenis kontrol: Dikendalikan oleh PLC, jenis aktuasi: listrik, Diameter pipa (maks.): 54 mm, Panjang pipa (maks.): 6.000 mm, Ketebalan dinding tabung (maks.): 4 mm, Sudut pembengkokan (maks.): 195 °, radius pembengkokan (maks.): 250 mm, radius tekuk (min.): 9 mm, tekanan (maks.): 250 batang, masa garansi: 24 bulan, Perlengkapan: Penandaan CE, henti darurat, kendali jauh kaki, perangkat ganti cepat, sistem pelumasan terpusat, THE COST-EFFECTIVE BENDING MACHINE FOR TIGHT BEND RADII: The bending machine with a free-standing bending head can be easily converted for complex geometries to right and left bending. The plug-in bending tools allow for quick changeover to different tube sizes. Fast hydraulics shorten auxiliary times, which is a crucial factor for serial production. The clamping pressure for tube holding can be optimally adjusted. The PLC control system (expandable via USB stick) with data storage and latest X2X interface can store an almost unlimited number of programs for bending angles, length measurements, and rotation angles for up to 50 bending sequences per tube length. For monitoring springback values, a freely programmable database for up to 200 materials is available. The machine features two operating modes: In 'simple bending' mode, the length and rotation of the bends relative to each other are displayed automatically. In 'controlled bending' mode, the data is preset, and during bending, a continuous actual/target comparison is performed. This eliminates mispositioning within a tolerance window, minimizing user-related error rates. General error messages are displayed in full text on the large screen. The mandrel retraction is programmable and can be automatically withdrawn early upon reaching the bending angle. The compact drive unit with detachable mandrel carrier offers advantages for on-site assembly as well as for special designs with very large tube feed, and is also available as a stationary version with an organizing system for tools and mandrel bars. An economical alternative to a fully controlled CNC machine. POSSIBLE APPLICATIONS: • Hydraulic piping • Pipeline construction • Plant engineering, e.g. for chemical industry • Metal construction • Prototype construction Technical data: • Bending capacity Ø 6 to 50 x 4 mm depending on material • Min/max bending radius: 10 mm/140 mm • Minimum bending radii: 1.5 x Ø (standard 2 x Ø) • Multi-function machine control, bending angle setting (0.1°) • Mandrel carrier lengths: 1500/3000/4500/6000 mm (special lengths available) • Maximum 180º bending angle • Weight: 600-700 kg (depending on configuration) • Ergonomic operation via safety foot switch OPTIONAL ACCESSORIES: • Automatic mandrel lubrication (minimum quantity) • Pneumatic or hydraulic quick-action chuck • Positioning of length and rotation via automatic braking function or manual stops using the foot switch • Semi-automatic positioning of length and rotation via servomotors • Pneumatic rotation stop • Tube calculation software • Laser-assisted tool monitoring for supervision of tool clamping • 10-inch touch screen with integrated tube calculation • Bending radius up to 250 mm • Data transfer via cable (LAN), wireless (WLAN), or USB OUR SERVICE: • Welcome for test production at our facility in the demo room Dsdpfxsndn Ago Aiujch • Consultation and information session at your location • Leasing/financing purchase consultation and handling via JUTEC • Trade-in of your current machine • Service contracts and on-site maintenance

Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2026, jenis aktuasi: listrik, Diameter pipa (maks.): 35 mm, Ketebalan dinding tabung (maks.): 2 mm, Sudut pembengkokan (maks.): 360 °, radius pembengkokan (maks.): 150 mm, radius tekuk (min.): 32 mm, berat keseluruhan: 28 kg, masa garansi: 12 bulan, Perlengkapan: Penandaan CE, henti darurat, kendali jauh kaki, THE HIGH-PERFORMANCE MOBILE BENDING MACHINE: The compact, mobile design enables precise and repeatable bending both in the workshop and directly on-site, for tube diameters up to 35 mm, CU 42 mm. A powerful three-phase motor and precision gearbox ensure strong drive performance. The motor speed is automatically adjusted, allowing for faster reverse operation and reduced cycle times. Position detection directly on the bending axis delivers optimal bending accuracy and excellent repeatability. The bending angle can easily and quickly be set to 0.5° using push buttons. The large LCD display clearly shows the angles. Up to three bending angles can be saved, allowing efficient bending of tubes with varying requirements. For transport, the compact unit and accessories can be safely and neatly stored in sturdy transport cases. The “stationary tube, rotating tool” principle minimizes space requirements during bending. When working with thin-walled tubes, sliding shoes are used to ensure wrinkle-free bending and to create curves with minimal deformation in, for example, stainless steel and copper tubes. Dcodpfx Aenfvx Noiuoh With the PB20 profile bending attachment, flat, square, and round bars can also be bent with ease. POSSIBLE APPLICATIONS: • Hydraulic tubing • Prototype construction • Plumbing and heating installation • Technical data: • Bending capacity Ø 6 to 35 mm, CU Ø 42 mm depending on material • Bending radius min/max: 36 mm/150 mm • Precise digital bending angle adjustment 0.5° • Maximum 180° bending result; for special applications, continuous operation possible • 40 mm hexagonal shaft for rapid tool change • Safety foot switch with emergency stop function • 230 V AC connection • Weight 29 kg • Frequency converter and three-phase motor • 3 storable bending angles OPTIONAL ACCESSORIES: • Sliding shoe holder • Double roller mount • PB20 profile bender – for bending flat and square bars up to max. 80 x 8 mm, round bars up to max. 20 mm • Tripod base • Machine case • Tool case • Small bending device KBV • Special tools on request OUR SERVICE: • Welcome to test production on-site in our demonstration area • Consultation and information meetings at your premises • Leasing/financing options available via JUTEC • Trade-in of your current machine • Service contracts and on-site maintenance available

Kondisi: baru, Tahun pembuatan: 2025, nomor mesin/kendaraan: 1018, THE POWERFUL BENDING MACHINE FOR EXTREME APPLICATIONS: The compact bending machine enables precise and repeatable bending up to an external diameter of 100 mm, both in stationary operation and directly at the installation site. Transport can be carried out using a pallet truck or with the optionally available rollers. A robust three-phase motor and precision gearbox ensure powerful drive performance. The machine stands out due to its compact and slim design as well as the exceptionally open bending area. Direct position detection on the bending axis guarantees optimal bending accuracy. Bending angle adjustment is quick and simple via a user-friendly, menu-driven interface available in 14 languages with touchscreen control, ensuring even more intuitive operation. Up to 100 bending programs can be stored for complex bending tasks, each supporting a sequence of up to 8 bends per geometry. The multifunctional control system allows variable adjustment of bending speed for forward and reverse motion, with a parameterizable overbending function to compensate for material springback. Using the four material characteristic curves, the machine automatically overbends the material to the required angle, thus ensuring highly precise results. The “stationary tube and rotating tool” principle minimizes the machine’s footprint. For thin-walled tubes, sliding shoes are used to ensure wrinkle-free bends and to make bends with minimal deformation, for example, in stainless steel and copper tubing. With the PB20 profile bending attachment, flat, square, and round iron profiles can be bent with ease. The KBV small radius bending device attachment allows extremely tight bending radii. POSSIBLE APPLICATIONS: • Plant engineering • Hydraulic piping • Serpentine bending • Prototyping • Plumbing and heating installations • Shipbuilding TECHNICAL DATA 10000: Bending capacity: up to 100 x 5 mm, 55 mm solid material Three-phase current 400 V • Bending radius up to 500 mm • Multifunctional machine control, bending angle setting (0.1°) • Maximum bending angle 240° • Safety foot switch with emergency stop • Weight 600 kg OPTIONAL ACCESSORIES: • Adapter system for tools from the 3000/6000 model series with bending radii from 45 mm, incl. 40 mm hex shaft • PB20 profile bending attachment – for bending flat and square steel up to max. 100 x 10 mm, round steel up to max. 20 mm • KBV small bending device • Special tools according to specifications • Software adaptations for special applications OUR SERVICE: • You are welcome to visit our demo room for test production • Consultation and information meeting at your site • Consulting and handling of lease/financing purchase via JUTEC • Trade-in of your current machine Dcedpfxjndk N Aj Aiujh • Service contracts, on-site maintenance

Kondisi: baru, Tahun pembuatan: 2025, THE PRECISE 3-ROLL BENDING MACHINE Dcjdpfxjng A R So Aiujh The development of the compact and mobile horizontal bending machine focused specifically on producing dimensionally accurate spirals, such as handrails for spiral staircases. This represents the gold standard in bending, as two mutually dependent variables (radius and pitch) must combine in a single process to form a precise geometry. The interaction between pipe calculation on a PC, implementation on the bending machine, and control via measuring devices with subsequent correction of bending values ensures perfectly accurate results. With minimal and simple input into the PC pipe calculation program, the local printer provides a printout supporting the calculation of all necessary bending and correction data for operating the machine. A new powerful drive concept allows variable adjustment of the bending speed and requires only a standard 230 V (single-phase AC connection). Choose between hardened steel tools and surface-friendly hard plastic tools. For optimum feed even with tight bending radii, all three bending shafts are powered. This drive system also proves itself in everyday heavy-duty use for flat work and for bending pipes and profiles. Customers of the bending systems 4800, 5000, and 6000 can purchase the roll bending unit separately without the drive. The roll bending unit, designated RB43, can be adapted to the 4800, 5000, and 6000 bending systems via the bending shaft. Here, the machines serve as the drive unit. POSSIBLE APPLICATIONS: • Handrails/lower rails for spiral staircases • Large-radius pipe and profile bends • General metal fabrication TECHNICAL DATA: • Bending capacity: Ø 10 to 60 mm • Minimum bending radius: 300 mm with Ø 42.4 mm • Right and left bending direction • Digital bending adjustment for radius and pitch • Safety foot switch with emergency stop function • Maintenance-free, robust three-phase motor • 230 V site-compatible connection • Weight: 280 kg OPTIONAL ACCESSORIES: • Support roller for stabilization • Lift roller for producing controlled pitch • MGR – Measuring device for determining the correct radius • MGV – Measuring device for determining the correct pitch via twist measurement • MPW – PC calculation program for determining accurate bending values • RB4303 – Universal bending tool for profiles up to 60 mm height • Tools for custom profiles OUR ON-SITE SERVICE FOR YOU: • Test production demo available in our in-house showroom • Consultation and information session at your location • Leasing/financing options, advice and processing • Service contracts, on-site maintenance

Kondisi: baru, Tahun pembuatan: 2025, THE PRACTICAL HAND BENDING DEVICE: The compact, mobile design enables precise and repeatable bending in a bench vise. Operation is carried out via a screw-in handle. A lockable setting ring ensures repeatable bending accuracy. Tool exchange is exceptionally simple due to the plug-in system. The principle of “stationary pipe and rotating tool” allows bending in the smallest possible space. For thin-walled pipes, sliding shoes are used for crease-free bending, enabling the production of bends with minimal deformation, e.g. for stainless steel and copper pipes. The optional model with hexagonal drive facilitates not only use in a vise, but also allows the bending device to be powered by the 3000 and 6000 systems. For this, the KBV is simply mounted onto the machine’s bending shaft. POSSIBLE APPLICATION AREAS: • Hydraulic pipework Dcjdpfjng Amksx Aiueh • Prototype construction • Plumbing and heating installation TECHNICAL DATA: • Bending capacity Ø 6 to 18 mm • Manual bending angle limitation • Maximum bending angle of 180º OPTIONAL ACCESSORIES: • KBV with hex drive for bending on model 3000 or 6000 • Machine case • Length stop OUR ON-SITE SERVICE FOR YOU: • Welcome to test production in our demo room • Consultation and information meeting at your premises • Consulting and processing of leasing/financing purchases via JUTEC • Trade-in of your current machine • Service contracts, maintenance on-site at your location