Beli Cnc Mill Mesin Pemotong Dan Penandaan Pusat bekas (82.502)

Kondisi: bekas, Tahun pembuatan: 2010, Spesifikasi supper mini mill: X 406 mm, Y 305 mm, Z 254 mm. Kecepatan maksimum 10.000 RPM. Daya 15 HP (11,2 kW). Taper CAT 40 / BT40. Njdpfoy D A S Dsx Aa Uswg

Kondisi: baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Mesin chamfer untuk material bulat / batang dengan diameter 12 - 75 mm, dengan penjepitan sentris, dilengkapi gearbox kontrol Stöber. Nwedpfx Aaoyvga Is Ueg

Kondisi: siap digunakan (bekas), Mesin Pusat KUHN KAZ 80-2 -Diameter benda kerja maks. / Bulat 80mm -Diameter benda kerja maks. / Persegi 60mm -Panjang pemusatan / Tak terbatas -Unit penjepit dengan ragum self-centering Nodpfxsyur Uzo Aa Uowg -Penggerak spindle 1,8 KW -Chuck bor -Bak serpihan -Kabel sambungan -Slot forklift untuk transportasi Dimensi: PxLxT 1,7x0,7x1,4 meter / Berat 600Kg Kesalahan dan kekeliruan input dapat terjadi.

Kondisi: bekas, CNC Vertical Machining Center HURCO Type BMC 30/M Serial No: B3M92202056AB : 9650234 Year of construction: 1996 CNC Path Control Ultimax 3 Travel paths X: 760 mm, Y: 460 mm, Z: 610 mm Table size (clamping surface) 1010 x 400 mm Table size (with coolant groove) 1120 x 500 mm Spindle taper SK 40 Distance spindle nose - table 150 - 760 mm Overhang 450 mm Spindle speed 80 to 8000 rpm, stepless Feed rate 3 to 16,000 mm/min Rapid traverse 24 m/min Nsdpfx Aajtrhq He Uewg Spindle drive 7.5 kW at 30 min / 5.5 kW at 100% Mains connection 400 Volt, 50 Hz - CNC path control Ultimax 3 (with hardware update e.g. TFT monitors) - electronic handwheel - Indirect measuring system with rotary encoders mounted on the ballscrew - Tool changer with 24 tool positions - Fully enclosed safety cabin with sliding door - Swiveling control panel - Yaskawa spindle drives (Japan) - Pneumatic mechanical tool clamping system - Coolant system externally mounted, pushed in from the rear - Tank flushing Machine width 2400 mm Space required for transport L x W x H 3400 x 2400 x 2550 mm Weight approx. 4800 kg Good condition

Kondisi: bekas, cnc-vertikal-bmc25m-en Nodpfx Aaow Nklho Uowg

Kondisi: bekas, CNC vertical machining center FEHLMANN type PICOMAX 60 Nwodpoy N Du Dofx Aa Uog CNC control HEIDENHAIN TNC 426 Serial No. 14599641 Year of manufacture: 1999 Travel ranges X: 500 mm, Y: 350 mm, Z: 610 mm Feed rate 1 - 20,000 mm/min Rapid traverse 20 m/min Feed force: 12,000 N Clamping surface of the table 920 x 380 mm T-slots 7 pcs, 12-H8 mm Max. table load 250 kg Table height 1,004 mm Distance spindle nose - table 94 - 704 mm Spindle overhang - column 405 mm Spindle speed 50 - 18,000 rpm, stepless Spindle drive 10.2 kW (60% duty cycle) Max. torque 70 Nm (up to 1,240 rpm) Spindle taper SK 30 / DIN 69871A Pull stud DIN 69872 Drilling capacity in steel 25 mm Milling capacity in steel / aluminium 100 / 700 cm³/min Tapping capacity in steel / aluminium M20 / M24 Tool changer 24 positions Tool change time approx. 6 sec. Chip-to-chip time approx. 8 sec. Control Heidenhain TNC 426 Power supply 400 Volt, 50 Hz Connected load 20 kW - Electronic handwheel Heidenhain HR410 - 3D probe Renishaw MP12 - Tool measurement system - TFT display - Direct path measuring system - Coolant system 200 liters, external - Spindle cooling unit, external - Central lubrication Vogel - Pneumatic supply 6 bar, 40 - 200 l/min - Oil mist extraction - Operating hours: - Control on 97,000 h - Machine on 80,000 h - Program run 42,000 h Space required L x W x H 2,000 x 1,700 x 3,000 mm Weight approx. 3.2 tons Good condition

Kondisi: sangat baik (bekas), Tahun pembuatan: 2022, Fungsionalitas: berfungsi sepenuhnya, lebar pemotongan (maks.): 1.800 mm, panjang pemotongan (maks.): 3.200 mm, jenis arus masuk: tiga fasa, lebar total: 2.830 mm, arus masuk: 32 A, lebar kerja: 1.800 mm, panjang total: 4.120 mm, tegangan masuk: 400 V, ketinggian potong (maks.): 50 mm, frekuensi input: 50 Hz, kebutuhan tinggi: 3.200 mm, persyaratan ruang panjang: 6.120 mm, lebar yang dibutuhkan: 4.830 mm, sambungan udara terkompresi: 10 batang, Perlengkapan: dokumentasi / manual, penghadang cahaya keselamatan, 1. Device Data & Dimensions Work Area: 1800 x 3200 mm Material Pass-Through: 60 mm (cutting thickness tool-dependent up to 50 mm) Basic Equipment: Triple module carrier, laser pointer, adjustable vacuum, integrated tool initialization (ITI) for 3 modules Nedpfsy Ddmpox Aa Uowg Dimensions (L x W): 412 x 283 cm 2. Installed Modules & Tools Universal Module UM-ZS: Interface for various cutting/drawing tools Routing Module (MQL RM-L, 3.6kW, HSK): High-performance milling module (water-cooled) incl. minimum quantity lubrication, cooling unit, pneumatic clamping system, and electronically controlled chip extraction Auto Router Bit Changer (ARC, HSK): Automatic 8-position collet magazine incl. router cleaning and scanning function Cutting Tools: * Universal Cutting Tool (UCT) incl. spring-loaded glide shoe & 2 blade holders (Type 1+3) Electric Oscillating Tool (EOT-250, 2.5 mm stroke, for 1.5 mm blades) incl. spring-loaded glide shoe Accessories: 7x collet holders HSK-E 25, 1x collet ER16 (Ø 6.0 mm), blade adjustment gauge (1.5 mm), various router/blade sets 3. Material Handling & Vacuum Vacuum: Automatically regulated turbine (1-15kW, 3-phase 400V) Transport: Conveyor belt G3 L-3200 (without front extension). Material transport 60 for boards; transport bar for roll/sheet material (Note: Industrial vacuum cleaner not included in the package) 4. Software & Workstation Workstation: Holders for 2 modules, 3 tools & monitor; PC compartment and storage space Software: Zünd Cut Center V3.x (Cut Server, Manager, Editor) Licenses: Cut Queue (auto-workflow, unlimited hotfolders) & Routing Option (milling, drilling, engraving) 5. Installation Requirements Space Requirement: Min. 612 x 483 cm (1 m peripheral clearance required) Ceiling Height: Min. 320 cm (system incl. support frame L-2500 / L-3200) Floor: Flatness +/- 20mm, load capacity min. 200 kg/m² (anchoring recommended) Environment: +10 to +35°C, 10–80% relative humidity (non-condensing) 6. Electrical & Supply Requirements Cutter Power: 3 phase 400 V (323-457V), 50 Hz. Fuse protection: 32 A (CEE32). RCD: 30 mA / Type B Routing Module Power: 3 phase 345-415 V, 50 Hz. Fuse protection: 32 A. RCD: 30 mA / Type F Vacuum Cleaner Power (Auto operation): 370-426 V or 200-240 V. Fuse protection: 16 A (CEE16). RCD: 30 mA / Type A Compressed Air (external): 0.6 - 1.0 MPa, 160 l/min, hose inner Ø 6-7 mm, air purity class 2.4.1 (ISO 8573-1) PC System (not included): Min. Intel Core i7 (3.1 GHz), 8 GB RAM, 20 GB HDD/SSD, Win 10 (64bit), 4x USB, 2x RJ45 LAN, min. resolution 1280x1024

Kondisi: bekas, Machine has a fault in the main spindle. CNC Vertical Machining Centre CHIRON Type FZ 22 L high speed Machining centre with CNC control FANUC Series 21-M Serial No. 179-98 Year of manufacture: 1999 Travel distances X: 2000 mm, Y: 520 mm, Z: 630 mm Table size 2700 x 570 mm Table load capacity 525 kg (per meter) Tool holder SK 40 (DIN 69871) Drilling capacity 35 mm Tapping capacity M27 Tool diameter 75 mm Diameter with free adjacent stations 105 mm Tool change time tool-to-tool 2.0 sec. Tool change time chip-to-chip 4.8 sec. Distance spindle nose – table 190 to 820 mm Spindle speed max. 10,500 rpm Main spindle drive max. 18.5 kW Nwjdpfxjquhbgj Aa Usg Power supply 400 Volt, 50 Hz, 32 kVA - Pendulum machining via 2 work areas (partition wall missing) - CNC control FANUC Series 21-M - 40-position tool changer - Through spindle coolant (IKZ) - Splash guard cabin with sliding door - Indirect path measurement system - Coolant unit with chip conveyor adjacent - Electronic handwheel Transport dimensions of the basic machine L x W x H 4600 x 2470 x 2950 mm Machine weight approx. 7.5 tons Transport dimensions for the truck L x W x H 12000 x 2470 x 2950 mm Transport weight on the truck approx. 10 tons Weight 7.2 tons Good condition – machine has a fault in the main spindle.

Kondisi: bekas, As-new CNC vertical machining center, milling machine VMC, machining center, HSC milling, machining center TAIKAN B540Z Serial no. 1171009 Year of manufacture: 2017 CNC path control: SIEMENS Sinumerik 828 D Basic Njdsw Ed U Njpfx Aa Uswg Axis travels for working area X: 488 mm, Y: 400 mm, Z: 230 mm X-axis travel (for tool change position): X: 540 mm Table size: 520 x 400 mm Spindle taper: ISO 25 Distance spindle nose - table: 165 - 395 mm Spindle speed: max. 36,000 rpm, stepless Feed rate: 0 to 10,000 mm/min Rapid traverse: 15 m/min Table load capacity: 200 kg Maximum tool length: 120 mm Maximum tool diameter: 80 mm Maximum tool weight: 0.8 kg Tool change time: approx. 10 sec Axis drive power: each 0.8 kW Spindle drive power: 3.5 kW at 100% duty cycle Power supply: 400 Volt, 50 Hz, 7.5 kW CNC path control SIEMENS Sinumerik 828 D Basic - Software: NCU V04.05+SP06+HF01 - Interfaces: LAN, USB, and CF-Card - Measuring system for tool measurement: METROL tool sensor - Vertical milling spindle = high-frequency spindle with liquid cooling and recooling unit (adjacent) - Tool changer with 13 magazine positions - Electronic handwheel - Coolant system - Safety enclosure with sliding door - Central lubrication - Includes 10 ISO 25 tool holders with ER20 collet chucks and a set of collets Transport space requirement L x W x H: 1800 x 1500 x 2300 mm Weight: 2900 kg Very good condition – as new Machine comes from a showroom and has only low operating hours.

Kondisi: bekas, 4-axis CNC drilling and milling machine IXION type 30 CNC W VMC, machining center Year of manufacture: approx. 1997, machine overhauled in 2020 Travel distances X: 600 mm Y: 350 mm Z: 600 mm Table size: 800 x 400 mm T-slot spacing: 75 mm Table load capacity: 300 kg Spindle taper: SK 40 (retention knob DIN 69872 A) Spindle speed: 20-5000 rpm Spindle torque: max. 150 Nm Distance spindle nose to table: max. 660 mm Feed rate X, Y and Z: 0 - 5000 mm/min, stepless Rapid traverse X, Y and Z: 15000 mm/min Tool change time: approx. 5 sec Chip-to-chip time: approx. 7.5 sec Milling capacity in St 60: 150 ccm/min Drilling capacity in St 60: 35 mm Tapping capacity in St 60: M24 Spindle drive power: 5 kW (10 kW at 25% duty cycle) Power supply: 400 Volt, 50 Hz - CNC control Heidenhain TNC 415 with 12" TFT display - Electronic handwheel - RS 232 interface - 12-position automatic tool changer - Hydro-mechanical tool clamping - Rotary axis as dividing head on the table = 4th axis, MECATECNICA type DCN 250-8, 3-jaw chuck Ø 200 mm Speed approx. 25 rpm, gear ratio 1:180 - Cabin lighting via 2x halogen spotlights - Chip conveyor with coolant pump - Control cabinet fixed to the machine Transport dimensions: Length 320 cm x Width 230 cm x Height 300 cm Machine footprint with chip conveyor (L x W x H): 3200 x 3100 x 3000 mm Nwedpeu Tln Nofx Aa Ujg Machine weight: 3,100 kg Chip conveyor weight: approx. 200 kg Good condition.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2012, Fungsionalitas: berfungsi sepenuhnya, CNC Horizontal Lathe Mori Seiki NL2000Y/500 Year of manufacture: 2012 Control system: MAPPS III Maximum swing diameter: Ø923 mm Maximum swing over cross-slide: Ø755 mm Maximum turning diameter: Ø356 mm Bar capacity: Ø65 mm Travel X-axis: 260 mm / Z-axis: 590 mm Y-axis travel: ±50 mm Njdpfx Aswvrfkja Uowg Spindle speed: 5,000 rpm Turret: 12 stations Maximum milling speed: 6,000 rpm Chip conveyor Special clearance price: ONLY 39,000 EUR

Kondisi: bekas, en-CNC-vertical-machining-center-specs Nsdpfx Asu Idf Eja Ujwg

Kondisi: baru, MASTERWOOD CNC machining center Type MVD 900 - Edition Partnership - Demonstration machine Continuous feed machining, Ball screws on all axes, Network card for remote maintenance, Integrated control cabinet, Saw unit for slot cutting in X-direction, Pick-up tool changer, Automatic central lubrication, Panel measurement sensor Nwodpfsyrhcpex Aa Ujg ----- Technical Data ----- min. workpiece length X: 250 mm, min. workpiece length Y: 80 mm, min. workpiece thickness: 10 mm, max. workpiece length X: unlimited mm, max. workpiece width Y: 990 mm, max. workpiece thickness: 60 mm, Main spindle motor power: 4.5 kW, Main spindle speed: 1,000 - 18,000 rpm, Main spindle interface: ISO 30, Number of vertical drilling spindles: 20 pcs, Saw blade diameter of saw unit: 125 mm, Number of tools in changer: 6 pcs, Extraction connection Ø: 100 + 100 mm Includes: - complete tool set: Drill set for boring head, 1 HW grooving saw blade, 2 x DP slot cutters, 1 HW-WP finish cutter, 3 collet chucks with collets - brand new demonstration machine -

Kondisi: bekas, Tahun pembuatan: 2014, jam operasional: 30.663 h, nomor mesin/kendaraan: 87391, de-001 Nwedpey T Nygofx Aa Ueg

Kondisi: baru, Maximum workpiece length: 3,800 mm Milling spindle: 1 piece Main motor: 15 kW Controller: Maestro active windoor Windor NT 1 ANGULAR MACHINING CENTER FOR WINDOW AND DOOR PRODUCTION --- Manufacturer’s Short Description: Windor NT1 is the angular machining center for the production of windows and doors. Despite its compact dimensions, it is capable of performing all processing steps such as cross-cutting, tenoning, boring, milling, and profiling. It operates completely independently of design concept, joint type, cross-section, etc. --- Technical Manufacturer Description: Position "1": Cross-Cut Saw Unit Features: - Motor power: 4 kW (5.5 HP) - Speed: 3,000 rpm - Max. tool diameter: 400 mm - Saw blade bore: 80 mm / Flange diameter: 100 mm - Pneumatic vertical positioning ON/OFF - 1 extraction port, diameter: 160 mm Position "2": Tenoning and Slotting Unit Features: - Heavy-duty spindle, diameter: 50x320 mm - Motor power: 7.5 kW (10 HP) - Speed: 3,500 rpm - Max. tool diameter: 320 mm - Max. tenon depth: 105 mm - Axial stroke below table: +15/-300 mm - Automatic anti-splinter device "Jolly" - Maximum tenon angle: ± 60° - Vertical positioning through M.C. brushless motors - Left-hand rotation - 1 extraction port, diameter: 200 mm Position "3": Profile Milling Unit Features: - Heavy-duty spindle, diameter: 50x320 mm - Motor power: 7.5 kW (10 HP) - Speed: 6,000 rpm - Min./max. tool diameter: 130-240 mm - Axial stroke below table: +15/-300 mm - Vertical positioning through M.C. brushless motors - Pneumatic horizontal positioning ON/OFF with 5-position turret stop (standard, if option 99.06.62 is not installed) - Right-/left-hand rotation - Climb cutting function for anti-splinter protection during rebating Position "4": Profile Milling Unit Features: - Heavy-duty spindle, diameter: 50x320 mm - Motor power: 7.5 kW (10 HP) - Speed: 6,000 rpm - Min./max. tool diameter: 130-240 mm - Axial stroke below table: +15/-300 mm - Vertical positioning through M.C. brushless motors - Pneumatic horizontal positioning ON/OFF with 5-position turret stop (standard, if option 99.06.62 is not installed) Position "5": "DUO" Unit Shadow groove unit complete with: - Spindle diameter: 50 mm - Spindle length: 3 mm - Speed: 9,000 rpm - Tool diameter: 154 mm Unit for glazing bead cutting and/or hardware milling with: - Spindle diameter: 30 mm - Spindle length: 35 mm - Speed: 6,000 rpm - Max. tool diameter: – Saw blade for glazing bead cutting: 200 mm – Tool for hardware milling: 240 mm Common features: - Pneumatic angle rotation with 2 positions: 0°-90° - Pneumatic in/out of operation ON/OFF with 5-position turret stop - Manually operated axial positioning Nwjdpjy T R S Rofx Aa Ujg - 1 extraction port, diameter: 160 mm --- Maestro active windoor The machine control is organized on two levels. The first level comprises an industrial numerical control from BECKHOFF, which executes all SPS control functions. The second level is an industrial PC, the "eye-M evo" console, which serves as the interface between operator and machine.

Kondisi: bekas, Tahun pembuatan: 2021, jam operasional: 14.603 h, nomor mesin/kendaraan: 15175186784, Katalog-Nr.: 1.5, 5-Achs-Bearbeitung, Bahnsteuerung HEIDENHAIN TNC 640 (5 Achsen), Werkzeugaufnahme SK40, Aufspannplatte/Tisch: 2.000x800 mm, max. Tischbelastung: 500 kg, Verfahrwege X/Y/Z: 1.800/700/700 mm, Schwenkkopf: +/- 100° stufenlos, Sondereinrichtungen: Anschluss an zentrale Ölnebel-Absauganlage, direkte Messsysteme, Messtaster RENISHAW mit Funk, Rundtisch D700 stufenlos positionierbar, externe Programmiermöglichkeit über Mastercam, Zwischenverkauf vorbehalten Nwedpfx Aaey T Nxio Usg

Kondisi: bekas, Tahun pembuatan: 2020, jam operasional: 20.202 h, nomor mesin/kendaraan: 87969, 1.3 Nwjdpfsy T Nwfsx Aa Usg

Kondisi: bekas, Tahun pembuatan: 2023, jam operasional: 9.300 h, nomor mesin/kendaraan: 88095, 1 Nwodpfx Aey T Nwrja Ueg

Kondisi: bekas, Tahun pembuatan: 2021, jam operasional: 14.800 h, nomor mesin/kendaraan: 14505787934, 1.6.DMG.DMU50.ATC.GER Nwedpfxey T Nwlo Aa Uog

Kondisi: baik (bekas), Tahun pembuatan: 2016, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 665182, jarak pergerakan sumbu X: 650 mm, jarak lintasan sumbu Y: 550 mm, jarak gerak sumbu Z: 500 mm, kecepatan pemakanan sumbu X: 30 m/menit, laju pemakanan gandar Y: 30 m/menit, laju pemakanan sumbu Z: 30 m/menit, tinggi total: 2.850 mm, panjang total: 3.300 mm, lebar total: 2.400 mm, berat keseluruhan: 9.000 kg, kecepatan spindel (maks.): 42.000 rpm, jumlah slot dalam magazin alat: 40, Perlengkapan: dokumentasi / manual, OPS INGERSOLL SPEED HAWK 650 CNC machining centre - Important note: the spindle was replaced in 2025 for approx. EUR 40,000, so there are few spindle hours! - Pallet dimensions: approx. 320 x 320 mm Nodpjy Tvcusfx Aa Uswg - The pallets are clamped on the rotary table - Interface: HSK-E 40 - For further technical data see pictures - With technical documentation - With HSK-E 40 tool holders and three pallets Attention: the item must be collected absolutely bindingly between 21.07. and 23.07.2026 at a date to be agreed upon. FCA D-80339 Munich – loaded onto truck

Kondisi: baik (bekas), Tahun pembuatan: 2004, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 665001, jarak pergerakan sumbu X: 700 mm, jarak lintasan sumbu Y: 550 mm, jarak gerak sumbu Z: 450 mm, kecepatan pemakanan sumbu X: 30 m/menit, laju pemakanan gandar Y: 30 m/menit, laju pemakanan sumbu Z: 30 m/menit, berat benda kerja (maks.): 2.000 kg, tinggi total: 2.300 mm, panjang total: 3.300 mm, lebar total: 2.300 mm, lebar meja: 700 mm, panjang meja: 850 mm, beban meja: 2.000 kg, berat keseluruhan: 7.700 kg, kecepatan spindel (min.): 3.000 rpm, kecepatan spindel (maks.): 40.000 rpm, jumlah slot dalam magazin alat: 40, Perlengkapan: dokumentasi / manual, ops650-de Nwsdpfxjy Tu Ddj Aa Usg

Kondisi: bekas, Tahun pembuatan: 2026, typenschild_nicht_auffindbar_steuerung_siemens_sinumerik_noch_in _aufstellung_mit_kuhlmittelaufbereitung_knoll_baujahr_2009_rauchg asfilter_absolent_a_smoke_20_inkl_peripherie Nwsdpey T Nvzjfx Aa Ujg

Kondisi: baik (bekas), Tahun pembuatan: 2009, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 655118, jarak pergerakan sumbu X: 550 mm, jarak lintasan sumbu Y: 400 mm, jarak gerak sumbu Z: 400 mm, daya nominal (semu): 38 kVA, tinggi total: 2.300 mm, panjang total: 3.300 mm, lebar total: 2.200 mm, berat keseluruhan: 7.200 kg, kecepatan spindel (maks.): 42.000 rpm, tegangan masuk: 400 V, Perlengkapan: dokumentasi / manual, ops-ingersoll-speed-hawk-550-cnc-5achs Nwodpfoy Tutlsx Aa Usg

Kondisi: bekas, Tahun pembuatan: 2011, Area kerja X-Y: 4.422 x 1.753 mm; Perjalanan X-Y: 4.955 x 1.918 mm; Panjang lintasan sumbu Z: Z = 400 mm; Spindel milling 5-sumbu MORBIDELLI; Rotasi sumbu C: 650°; Kemiringan sumbu B: 290° (-10°); Daya: 11 kW pada 20.000 rpm, dapat diatur via inverter; Pendingin cairan; Antarmuka HSK 63F; Konveyor serbuk; Pelumasan sentral CNC otomatis; Penukar alat RAPID 24 (24 slot alat); Ekstensi kepala bor dengan 30 +6 spindel; 8 alat bantu posisi; 2 laser silang; Pompa vakum 250 m³/jam; Kontrol PC dengan Windows Office; Berat sekitar 5.000 kg.\nLokasi penyimpanan: Pelanggan Nodey D Rv Dspfx Aa Ujwg

Kondisi: baik (bekas), Tahun pembuatan: 2002, Fungsionalitas: berfungsi sepenuhnya, translation Nwedpfx Aey Twdmsa Ujg