Beli Cts C-40/600 -40 Bis +180°C bekas (77.137)

Kondisi: sangat baik (bekas), CTS climate test chamber type: C -40/600, air-cooled (retrofitted to use R-452A) Test chamber volume: 600 liters Temperature testing: - Temperature range: -40°C to +180°C - Temperature deviation: ±0.1 K / ±0.3 K over time in stabilized state - Average temperature change rate (without test specimen and without heat radiation): Heating: 2.5 K/min Cooling: 3.0 K/min - Max. heat radiation: 2500 W at +20°C Climate testing: - Climate range / Technical data: Temperature range: +10 °C to +95 °C Humidity range: 10% r.h. to 98% r.h. Dew point range I: +7 °C to +94 °C Dew point range II: –10 °C to +7 °C Consistency values (over time): - Humidity consistency I: ±0.5% r.h. to ±1.5% r.h. - Humidity consistency II: ±1% r.h. to ±3% r.h. - Temperature consistency: ±0.1 K to ±0.3 K Test chamber dimensions (approx.): - Height: 850 mm - Width: 850 mm Ledpfxsziizge Al Njhi - Depth: 830 mm External dimensions (approx.): - Height: 1900 mm - Width: 1115 mm - Depth: 1850 mm Refrigerant: R-452A Electrical connection: 400V 3/N 50Hz Connected load: 8.2 kW, Nominal current: 11.9 A Weight: 550 kg For your safety as a buyer, please note the following information: The following steps are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certification 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see image) (Technical data and information subject to change and errors!) We are happy to answer any further questions by phone.

Kondisi: sangat baik (bekas), CTS Tipe: C-70/600 Lemari Uji Iklim CTS C-70/600 model berpending udara dengan jendela pengamatan, pelindung sampel uji, dan dokumentasi Dijual lemari uji iklim CTS tipe C-70/600 berkualitas tinggi untuk pengujian suhu dan iklim yang presisi dalam penelitian, pengembangan, penjaminan kualitas, dan industri. Data Teknis: Rentang suhu: -70 °C hingga +180 °C Rentang kelembapan: 10 % hingga 98 % RH Rentang titik embun: -10 °C hingga +94 °C Volume ruang uji: 600 liter Koneksi listrik: 400 V 3/N 50 Hz Daya nominal: 8,7 kW Arus nominal: 14,8 A Tingkat perlindungan: IP 22 Refrigeran: R404A (tahap pra-pendinginan) / R23 (tahap pendinginan) Sistem pendingin kaskade untuk operasi suhu rendah hingga -70 °C Tekanan operasi PS: 25 bar Tekanan uji PT: 27,5 bar Peralatan / Fitur: Jendela pengamatan di pintu Ruang uji baja tahan karat Panel kontrol CTS dengan tampilan nilai setel/aktual digital Pelindung sampel uji / pembatas suhu Koneksi air / saluran air terdeionisasi Saluran pembuangan ruang uji dan kondensat Lubang untuk pipa di sisi ruang uji Antarmuka RS232 sesuai dengan dokumentasi Output digital untuk kontrol sampel uji Ljdpfjzmq Tlsx Al Nehi Dimensi ruang uji sesuai dengan dokumentasi: sekitar 850 x 850 x 830 mm Dimensi eksternal sesuai dengan dokumentasi: sekitar 1900 x 1115 x 1850 mm Berat sesuai dengan dokumentasi: sekitar 600 kg Lingkup pengiriman: Lemari uji iklim CTS C-70/600 termasuk dokumentasi / materi operasional yang ada Lingkup pengiriman seperti yang terlihat pada gambar Perangkat dapat diperiksa setelah perjanjian. Pemuatan dengan forklift dapat diatur. Kondisi: bekas / digunakan (Perubahan dan kesalahan dalam data teknis, spesifikasi dapat terjadi!) Kami dengan senang hati menjawab pertanyaan lebih lanjut melalui telepon.

Kondisi: sangat baik (bekas), CTS Type: C-70/600 Climate Test Chamber CTS C-70/600 air-cooled version with observation window, test item protection, and documentation For sale: High-quality CTS climate test chamber Type C-70/600 for precise temperature and climate testing in research, development, quality assurance, and industry. Technical data: Temperature range: -70 °C to +180 °C Humidity range: 10% to 98% RH Dew point range: -10 °C to +94 °C Test chamber volume: 600 liters Electrical connection: 400 V 3/N 50 Hz Rated power: 8.7 kW Rated current: 14.8 A Protection class: IP 22 Refrigerant: R404A (pre-cooling stage) / R23 (cooling stage) Cascade cooling system for low-temperature operation down to -70 °C Operating overpressure PS: 25 bar Test pressure PT: 27.5 bar Features / Equipment: Observation window in the door Stainless steel test chamber CTS control panel with digital setpoint/actual value display Test item protection / temperature limiter Water connection / deionized water supply Test chamber and condensate drain Tube feedthroughs on the side of the test chamber RS232 interface according to documentation Digital outputs for test item control Test chamber dimensions (according to documentation): approx. 850 x 850 x 830 mm External dimensions (according to documentation): approx. 1900 x 1115 x 1850 mm Weight (according to documentation): approx. 600 kg Scope of delivery: CTS climate test chamber C-70/600 including available documentation / operating instructions Scope of delivery as shown in the pictures Buyer safety: The device can be inspected by prior arrangement. Loading by forklift can be arranged. For your safety as a buyer, the following work is carried out on all our offered chambers in advance: Lhjdpfx Asy Hkazel Nsi 1. Functional check and replacement of necessary components 2. Refilling with legally compliant refrigerant if required 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used (Subject to change and errors in technical data and specifications!) For further questions, we are happy to assist you by phone.

Kondisi: sangat baik (bekas), CTS Climate Test Chamber CS-70/600-5/S Device Data Manufacturer: CTS GmbH Model: CS-70/600-5/S Design: Climate Test Chamber Cooling: Water-cooled Description Used climate test chamber from CTS. Suitable for temperature, climate, and stress screening tests. Intended for use in industry, research, and quality assurance. Operating Condition Display: Manual operation / Warning (purge water bath). Operating Hours Total: 19,788 h Compressor cooling: 8,699 h Compressor precooling: 11,432 h Circulation pump: 2,905 h Technical Data Temperature range: -70 °C to +180 °C Humidity range: 10 % to 98 % RH Dew point range: -10 °C to +94 °C Test chamber volume: 600 liters Electrical Data 400 V / 3/N / 50 Hz Power: 18.4 kW Current: 30.6 A Protection class: IP 22 Refrigeration System Refrigerants: R404A / R23 Pre-cooling stage: 5.0 kg Cooling stage: 2.1 kg / 14.5 bar CO₂ equivalent: 19.61 t / 30.93 t GWP: 3922 / 14800 Pressure Data PS: 25 bar PT: 27.5 bar Equipment Observation window Stainless steel test chamber CTS touch/LCD control panel Program mode Specimen protection / temperature limiter Water-cooled refrigeration unit Humidity system with water bath Automatic water refilling possible Interfaces (RS232 / Ethernet) Integrated control cabinet Industrial design Feedthroughs 1x NW 50 2x NW 125 Dimensions Interior: approx. 850 x 850 x 830 mm Exterior: approx. 1900 x 1120 x 1875 mm Weight Approx. 750 kg Scope of Delivery CTS Climate Test Chamber CS-70/600-5/S Ljdpfey H Hmwex Al Njhi Documentation / test certificates (if available) Service before delivery (optional): Functional inspection Refrigerant service Leak test Test run with protocol Condition Used. For visual condition please see pictures. Note Used device, sold without warranty. Inspection by appointment possible. Loading and transport can be arranged upon request. Subject to change and prior sale. If you have any questions, please contact us.

Kondisi: sangat baik (bekas), CTS Climate Test Chamber T-70/600 Water Cooled Temperature Range: -70°C to +180°C Rated Voltage: 400V 3/N PE 50 Hz Rated Power: 6.7 kW Rated Current: 10.2 A Compressor: TFH2480Z/TFH2511Z Refrigerant R23/R404A Control System: - Microprocessor-controlled regulation and monitoring system - Simple, user-friendly terminal integrated into the door - Digital display for setpoint and actual temperature values - Easy adjustment via +/- buttons - Digital temperature input in °C - PLC-compatible - Up to 100 test programs possible - RS 232 interface - 2 free switching channels for customer-side test specimen activation Lhedpfsziycbjx Al Noi Insert Shelf: Stainless steel, support surface 820 x 710 mm Max. load per shelf: 35 kg Total load with maximum shelving: 100 kg Refrigeration Unit: Water-cooled, low-noise, fully hermetic with continuously variable power adjustment via electronic monitoring and control system, environmentally friendly refrigerants R404A/R23 Temperature Tests: Temperature range: -70°C to +180°C Temperature deviation: ±0.1 to 10.3 K (time-based) Temperature change rate: According to DIN 50 011, Part 12, measured in the center of the test chamber - Heating: 2.5 K/min - Cooling: 2 K/min Thermal radiation max. 1500 W at +20°C Technical data refer to an ambient temperature of +25°C, rated voltage 400V, without test specimen, without radiation, and without additional equipment. Dimensions: Test volume: 600 liters Internal chamber dimensions: 850 x 830 x 850 mm (W x D x H) External dimensions: 1050 x 1850 x 1900 mm (W x D x H) Operating Data: Electrical connection: 400 V +6/-10%, 3/N, 50 Hz Rated power: 6.7 kW Rated current: 10.2 A Protection class: IP 22 Condensate drain: non-pressurized R 1/2" internal thread Sound pressure level:

Kondisi: sangat baik (bekas), CTS Type: T-40/600 /011232 CTS Temperature Test Chamber, Water-cooled Includes metal struts to increase the floor load capacity Test chamber volume: 600 liters Test chamber dimensions: Height approx. 850 mm, Width approx. 850 mm, Depth approx. 830 mm External dimensions: Height approx. 1900 mm, Width approx. 1050 mm, Depth approx. 1850 mm Temperature operating range: Temperature range: -40 to +180°C Temperature deviation: ±0.1 to ±0.3 K over time Heating rate: 2.5 K/min Cooling rate: 3 K/min Electrical connection: 400 V +6% -10%, 3/N, 50 Hz Nominal power: approx. 5.5 kW Nominal current: approx. 8.5 A Refrigerant: R-404A Weight: 550 kg For your safety as a buyer, please note the following information: The following points are carried out in advance for our offered chambers: 1. Functional check and replacement of necessary components 2. Refilling with legally compliant refrigerant if required 3. Leak test with certificate 4. After successful verification, the chambers undergo a documented trial run. Condition: used Scope of delivery: (see picture) Ljdjzh Htwjpfx Al Nehi (Technical data subject to change and errors excepted!) If you have further questions, we are happy to answer them by phone.

Kondisi: baik (bekas), CTS Type: T-70/600/S Water-cooled Temperature Test Chamber Refrigerant: Converted to R-452A Control System: - 32-bit controller - LCD control panel - Digital display of setpoint and actual values - Numeric entry of setpoints - Error messages in plain text - RS 232 interface - Free switching channels for customer-side test specimen control Technical Specifications Temperature Tests: Temperature range: -70°C to +180°C Temperature deviation: ±0.1 to ±0.3 K over time Temperature change rate according to IEC 60068-3-5 Heating: 2.5 K/min Cooling: 2.5 K/min Lhsdjzh D E Rspfx Al Nei Heat dissipation: Approx. 2,500 W at +20°C Approx. 2,500 W at 0°C Approx. 1,800 W at -40°C Technical data refer to an ambient temperature of +25°C, nominal voltage 400V, without test specimen, without irradiation, and without additional equipment. Dimensions: Test chamber volume: 600 liters Test chamber dimensions: Height approx. 850 mm, Width approx. 850 mm, Depth approx. 830 mm External dimensions: Height approx. 1,900 mm, Width approx. 1,120 mm, Depth approx. 1,875 mm Operating Data: Electrical connection: 400 V +6/-10 %, 3/N, 50 Hz Rated power: 8.8 kW Rated current: 14.8 A Protection class: IP 22 Weight: approx. 700 kg Refrigerant: R-452A / R23 Weight: 700 kg For your safety as a buyer, please note the following information! The following steps are carried out on all chambers we offer prior to sale: 1. Functional check and replacement of necessary components 2. If required, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, chambers undergo a documented test run. Condition: used Scope of delivery: (see picture) (Subject to change and errors in technical data and specifications!) For additional questions, we are happy to assist you by phone.

Kondisi: sangat baik (bekas), CTS Type: T-70/600/S Water-Cooled Temperature Test Chamber Control System: - 32-bit controller - LCD operating panel - Digital display of set and actual values - Numeric input of set values - Error messages in plain text - RS 232 interface - Free switching channels for customer-side test specimen control Technical Specifications Temperature Testing: Temperature range: -70°C to +180°C Temperature deviation: ±0.1 to ±0.3 K over time Temperature change rate according to IEC 60068-3-5: Heating: 2.5 K/min Cooling: 2.5 K/min Thermal Radiation: Approx. 2500 W at +20°C Approx. 2500 W at 0°C Approx. 1800 W at -40°C The technical data refer to an ambient temperature of +25°C, rated voltage 400V, without test specimen, without irradiation and without additional equipment. Dimensions: Lhjdpfxezg Ty Ij Al Nji Test volume: 600 litres Test chamber dimensions (H x W x D): approx. 850 mm x 850 mm x 830 mm External dimensions (H x W x D): approx. 1900 mm x 1120 mm x 1875 mm Operating Data: Electrical connection: 400 V +6/-10 %, 3/N, 50 Hz Rated power: 8.8 kW Rated current: 14.8 A Protection class: IP 22 Weight: approx. 700 kg Refrigerants: R404A / R23 Weight: 600 kg Safety Information for Buyers! The following procedures are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. Refill with legally compliant refrigerant, if necessary 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (See picture) (Subject to alterations and errors in technical data and specifications!) For further questions, please feel free to contact us by phone.

Kondisi: sangat baik (bekas), CTS Type: T-40/2000 Air-cooled Temperature Test Chamber Technical Specifications: Cooling Unit: - Air-cooled, low-noise, fully hermetic, infinitely variable power adjustment via electronic monitoring and control system - Environmentally friendly refrigerant R404A Door: - Fully opening door, left-hand hinge - One-hand operation, lockable Shelving Grate: - Stainless steel, support surface 970 x 980 + 500 mm - Maximum load per shelf: 35 kg - Total load with maximum shelf configuration: 100 kg Test Chamber Lighting: - 3x halogen lamps, 20 W, 12 V Control System: - 32-bit controller - LCD control panel - Digital display of setpoint and actual values - Numeric input of setpoints - Plain text fault messages - RS 232 interface - Free switching channels for customer-specific test item control Temperature Range: -40°C to +180°C Rated Voltage: 400V 3/N 50Hz Rated Power: 10.4 kW Rated Current: 17.2 A Compressor: TFH2516Z Piping Feedthrough: NW 50 Control Panel Window: 570 x 710 mm Electrical connection cable length: 5 m Technical Performance Data: Temperature Tests: - Temperature range: -40°C to +180°C - Temperature deviation: ≤ ±0.3 K over time - Temperature change rate according to IEC 60068-3-5: Lhedpfxszg Twao Al Nji - Heating: 2.5 K/min - Cooling: 1.5 K/min Heat Emission: - Approx. 2500 W at +20°C - Approx. 2100 W at 0°C - Approx. 1500 W at -20°C Technical data based on ambient temperature +25°C, rated voltage 400V, without test specimens, no irradiation, and no additional equipment. Dimensions: - Test volume: 2000 litres - Test chamber internal dimensions: Height 900 mm, Width 975 mm, Depth 2200 mm - External dimensions: Height 1950 mm, Width 1290 mm, Depth 3145 mm Operating Data: - Electrical connection: 400 V +6/-10 %, 3/N, 50 Hz - Rated power: 17.2 kW - Protection class: IP 22 - Condensate drain: gravity, R 1/2" internal thread - Sound pressure level (measured at 1 m front distance, according to DIN EN ISO 3744): < 55 dB(A) - Weight: approx. 1200 kg Important Information for Your Safety as a Buyer! The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful verification, the chambers undergo a documented test run Condition: Used Scope of delivery: (see image) (Technical data, specifications, and information are subject to change and correction!) We are happy to answer further questions for you by phone.

Kondisi: sangat baik (bekas), CTS Klimaprüfschrank C-70/600 Data Specification Manufacturer: CTS GmbH Model: C-70/600 Design: Climate Test Chamber Cooling: air-cooled Description Used climate test chamber from CTS. Suitable for temperature and climate testing. For use in research, development, and quality assurance. Operating Condition Display: Manual operation / Stop. Temperature: 16.59 °C (actual) / 5.00 °C (setpoint). Humidity: 39.7% RH. Water reservoir: 11.0 l. Technical Data Temperature range: -70 °C to +180 °C Humidity range: 10% to 98% RH Dew point range: -10 °C to +94 °C Test chamber volume: 600 liters Electrical Data 400 V / 3/N / 50 Hz Power: 8.7 kW Current: 14.8 A Protection class: IP 22 Refrigeration System Refrigerant: R404A / R23 Cascade refrigeration system Low-temperature operation down to -70 °C PS: 25 bar PT: 27.5 bar Equipment Observation window Stainless steel test chamber Digital setpoint/actual value display Test specimen protection / Temperature limiter Water connection (DI water) Lhodpfx Aoy H H D Ael Nei Condensate drain Cable ports RS232 interface Digital outputs Dimensions Internal: approx. 850 x 850 x 830 mm External: approx. 1900 x 1115 x 1850 mm Weight approx. 600 kg Scope of delivery CTS Climate Test Chamber C-70/600 Documentation (if available) Functional Testing Refrigerant service Leak tightness test Test run with protocol Condition Used. Condition as shown in images. Inspection available by appointment. Loading and transport can be organized on request. Subject to prior sale and modifications. If you have any questions, please do not hesitate to contact us.

Kondisi: sangat baik (bekas), CTS Klimatic Test Chamber C-70/600 Device Data Manufacturer: CTS GmbH Model: C-70/600 Design: Climatic test chamber Cooling: air-cooled Description Used climatic test chamber from CTS. Suitable for temperature and climate testing. For use in industry, research, and quality assurance. Technical Data Temperature range: -70 °C to +180 °C Humidity range: 10% to 98% RH Dew point range: -10 °C to +94 °C Test chamber volume: 600 liters Electrical Data 400 V / 3/N / 50 Hz Power: 8.7 kW Current: 14.8 A Protection class: IP 22 Refrigeration System Refrigerants: R404A / R23 Cascade refrigeration unit Low temperature operation down to -70 °C PS: 25 bar PT: 27.5 bar Equipment Observation window Stainless steel test chamber Digital setpoint/actual value display Sample protection / temperature limiter Water connection (deionized water) Condensate drain Cable ports RS232 interface Digital outputs Dimensions Internal: approx. 850 x 850 x 830 mm External: approx. 1900 x 1115 x 1850 mm Weight Approx. 600 kg Scope of Delivery CTS Climatic Test Chamber C-70/600 Documentation (as far as available) Service before delivery (optional) Lhsdpfxjy H Hl Hs Al Nsi Functional check Refrigerant service Leak test Test run with protocol Condition Used. Visual condition as shown in images. Inspection possible by arrangement. Loading and transport can be arranged upon request. Subject to change and prior sale. If you have any questions, please feel free to contact us.

Kondisi: sangat baik (bekas), Here we offer a Weiss temperature test chamber. Weiss Temperature Test Chamber with S!MCON / 32-Control, Water-Cooled Control Panel »Touch Panel« All control and operating commands can be executed by simply touching the function icons on the »Touch Panel« control unit. Adjustable Feet To compensate for uneven floors and ensure adequate ventilation of the machine compartment, the test chamber is equipped with adjustable feet. Feedthroughs The test chamber is equipped with feedthroughs on the right and left sides. Measurement cables and test equipment can be routed into the test space through these. Feedthroughs included in the standard configuration: - R1: nominal width 125 mm - L1: nominal width 50 mm (Refrigerant retrofitted to R-452A) Test chamber volume: approx. 600 liters External dimensions with hinges and door lock: Height 1995 mm, Width 1090 mm, Depth 1660 mm External dimensions without hinges and door lock: Height 1995 mm, Width 1000 mm, Depth 1660 mm Internal dimensions: Height 950 mm, Width 800 mm, Depth 800 mm Data for temperature tests: - Temperature range: -42 to +180 °C - Temporal temperature deviation in the center of the usable space: ± 0.1 to ± 0.5 K - Spatial temperature deviation: ± 0.5 to ± 1.5 K Temperature change rate (according to IEC 60068-3-5): - Heating: 4.0 K/min Lhodoziyb Ropfx Al Nei - Cooling: 3.0 K/min - Maximum heat compensation: 2,500 W Operating data: - Test space lighting: Halogen bulb 2 x 24 V, 50 W - Rated voltage: 3/N/PE AC 400V ±10% 50Hz - Rated current: 15 A, Rated power: 7.8 kW - External fuse: 16 A slow-blow - Sound pressure level: Approx. 58 dB(A) measured at 1 m distance from the front, 1 m height - Refrigerant: R-452A - Weight: 620 kg - Type: WT3-600/40 Important safety information for you as the buyer! The following work is carried out in advance on the test chambers we offer: 1. Functional check and replacement of necessary components 2. If required, new refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see photos) (Technical data subject to change and errors excepted!) If you have further questions, we are happy to answer them by phone.

Kondisi: sangat baik (bekas), Here we offer a Weiss temperature test chamber. Weiss temperature test chamber with S!MCON / 32 control unit, air-cooled (Refrigerant converted to R-452A) Control panel "Touchpanel" All control and operating commands can be executed by simply touching the function symbols on the touch panel. Adjustable feet To compensate for uneven floors and provide sufficient ventilation for the machine section, the test chamber is equipped with adjustable feet. Feed-throughs The test chamber is equipped with feed-throughs on both the right and left sides. These allow measurement cables and test devices to be routed into the test space. Standard feed-throughs installed: R1: nominal width 125 mm L1: nominal width 50 mm Test chamber volume: approx. 600 liters External dimensions (with hinges and door lock): Height 1995 mm, Width 1090 mm, Depth 1660 mm External dimensions (without hinges and door lock): Height 1995 mm, Width 1000 mm, Depth 1660 mm Internal dimensions: Height 950 mm, Width 800 mm, Depth 800 mm Temperature test specifications: Temperature range: -42 to +180 °C Temporal temperature deviation at center of working space: ± 0.1 to ± 0.5 K Spatial temperature deviation: ± 0.5 to ± 1.5 K Temperature change rate (according to IEC 60068-3-5): Heating: 4.0 K/min Cooling: 3.0 K/min Heat compensation max. 2500 W Operating data: Test chamber illumination: halogen bulb 2 x 24V, 50W Rated voltage: 3/N/PE AC 400V ±10% 50Hz Rated current: 15 A Rated power: 7.8 kW External fuse (slow-blow): 16 A Sound pressure level: Measured at 1m distance from the front, 1m height: 61 dB(A) Refrigerant: R-452A Weight: 620 kg Type: WT3-600/40 Important safety information for buyers: Lhsdjzga Huspfx Al Noi The following points are carried out on all our offered chambers prior to delivery: 1. Functional check and replacement of necessary components 2. If required, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (See picture) (Specifications and technical details subject to change and error!) For further questions, feel free to contact us by phone.

Kondisi: baik (bekas), TS -70/1000-10 Type For sale: CTS temperature test chamber Model: TS -70/1000-10 Cooling: water-cooled refrigeration unit, Compressor has been replaced! Ljdpfx Ajziizyol Nehi Equipment: - Multi-touch control - USB and Ethernet interfaces - Feedthroughs for test cables 4 × Ø 125 mm - Safety temperature limiter Application areas: - Environmental and lifetime testing - Temperature cycling tests (stress screening) - Quality assurance and research & development - Electronics, automotive, material testing Test chamber volume: 1,000 liters Internal dimensions: Height approx. 1,000 mm, width approx. 860 mm, depth approx. 1,100 mm External dimensions: Height approx. 1,950 mm, width approx. 1,270 mm, depth approx. 1,900 mm Temperature range: -70 to +180°C Temperature deviation: ± 0.3K over time Temperature change rate: up to approx. 10 K/min Electrical connection: 400V 3/N 50Hz Nominal power: approx. 23.1 kW Nominal current: approx. 40 A Refrigerant: R404A / R23 Weight: 1,000 kg For your safety as the buyer, please note! The following points are carried out in advance on the chambers we offer: 1. Functional check and replacement of necessary components 2. If necessary, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful testing, the chambers undergo a documented trial run. Condition: used Scope of delivery: (see photo) (Changes and errors in technical data reserved!) We are happy to answer any further questions you may have by phone.

Tahun pembuatan: 2018, Kondisi: sangat baik (bekas), CTS T-70/600 Lemari Uji Temperatur Produsen: CTS GmbH Model: T-70/600 Jenis Mesin: Lemari Uji Temperatur Volume Ruang Uji: sekitar 600 liter Rentang Temperatur: -70 °C hingga +210 °C Dijual sebuah lemari uji temperatur CTS T-70/600 bekas, buatan tahun 2018. Unit mandiri yang didinginkan dengan udara ini cocok untuk pengujian temperatur profesional, simulasi lingkungan, pengujian material, pengendalian kualitas, serta pengujian pengembangan dan beban. Ruang uji baja tahan karat memiliki volume sekitar 600 liter. Data Teknis: Produsen: CTS GmbH, Hechingen Model: T-70/600 Tahun Pembuatan: 10/2018 Volume Ruang Uji: sekitar 600 liter Jenis: Unit mandiri, didinginkan dengan udara Rentang Temperatur: -70 °C hingga +210 °C Stabilitas Temperatur seiring waktu: sekitar ±0,3 K Kompensasi Panas Maksimum pada +20 °C: sekitar 4.000 W Kecepatan Pemanasan: sekitar 3,5 K/menit Kecepatan Pendinginan: sekitar 3,0 K/menit Terdapat tanda CE Data Listrik: Tegangan Nominal: 400 V / 3/N / 50 Hz Daya Nominal: 9,1 kW Arus Nominal: 14,6 A Kelas Perlindungan: IP22 Sistem Pendingin: Jenis: didinginkan dengan udara Tahap Prakedinginan: R452A, 2,4 kg Ekuivalen CO₂: 5,14 ton GWP: 2.140 Tahap Pendinginan: R23, 0,8 kg Ekuivalen CO₂: 11,25 ton GWP: 14.800 Tekanan Operasi: 25 bar Tekanan Uji: 27,5 bar Dimensi dan Berat: Ruang Uji bagian dalam (T × L × D): sekitar 850 × 850 × 830 mm Dimensi Luar (T × L × D): sekitar 1.900 × 1.120 × 1.875 mm Berat: sekitar 600 kg Tingkat Tekanan Suara: di bawah 58 dB(A) Peralatan: Layar Multi-Sentuh Kapasitif Pengontrol Program Terintegrasi Operasi Nilai Tetap dan Program Ruang Uji Baja Tahan Karat, Bahan 1.4301 Jendela Penglihatan dengan Pencahayaan Internal Lsdpfx Aozmrmyjl Nshi Pengukuran Temperatur melalui Udara Masuk dan Keluar dengan Pt100 Pembatas Temperatur Perangkat Lunak Antarmuka Ethernet, RS232, dan USB Output Digital untuk Kontrol Sampel Uji Saluran Kabel Samping Kunci Pintu yang Dapat Dikunci Desain Portabel dengan Roda Saluran Pembuangan Ruang Uji dan Kondensat Catatan: Perangkat ini adalah lemari uji temperatur. Tidak terdapat pengaturan kelembapan. Kondisi: Bekas / Used Kondisi Visual sesuai dengan gambar Tanda-tanda penggunaan normal yang disebabkan oleh usia dan penggunaan Lingkup Pengiriman: Lemari Uji Temperatur CTS T-70/600 Aksesoris sesuai dengan gambar Meja yang ditampilkan dalam foto serta barang-barang lain yang tidak disebutkan secara eksplisit tidak termasuk dalam penjualan. Pengiriman melalui perusahaan ekspedisi dimungkinkan. Pemuatan dengan forklift dimungkinkan. Perubahan, kesalahan, dan penjualan antara dimungkinkan.

Tahun pembuatan: 2018, Kondisi: sangat baik (bekas), CTS T-70/600 Lemari Uji Temperatur Produsen: CTS GmbH Model: T-70/600 Tahun Pembuatan: 10/2018 Jenis Mesin: Lemari Uji Temperatur Volume Ruang Uji: sekitar 600 Liter Rentang Temperatur: -70 °C hingga +210 °C Dijual sebuah lemari uji temperatur CTS T-70/600 bekas dari tahun pembuatan 2018. Unit mandiri yang didinginkan dengan udara ini cocok untuk pengujian temperatur profesional, simulasi lingkungan, pengujian material, pengendalian kualitas, serta pengujian pengembangan dan ketahanan. Ruang uji baja tahan karat memiliki volume sekitar 600 liter. Data Teknis: Produsen: CTS GmbH, Hechingen Model: T-70/600 Tahun Pembuatan: 10/2018 Lhodpfxozmqx Io Al Noi Volume Ruang Uji: sekitar 600 Liter Desain: Unit mandiri, didinginkan dengan udara Rentang Temperatur: -70 °C hingga +210 °C Stabilitas Temperatur dari waktu ke waktu: sekitar ±0,3 K Kompensasi Panas Maksimum pada +20 °C: sekitar 4.000 W Kecepatan Pemanasan: sekitar 4,03 K/menit Kecepatan Pendinginan: sekitar 3,17 K/menit Tanda CE tersedia Data Listrik: Tegangan Nominal: 400 V / 3/N / 50 Hz Daya Nominal: 9,1 kW Arus Nominal: 14,6 A Jenis Perlindungan: IP22 Sistem Pendingin: Desain: didinginkan dengan udara Tahap Pr pendingin: R452A, 2,4 kg Ekuivalen CO₂: 5,14 t GWP: 2.140 Tahap Pendingin: R23, 0,8 kg Ekuivalen CO₂: 11,25 t GWP: 14.800 Tekanan Operasi PS: 25 bar Tekanan Uji PT: 27,5 bar Dimensi dan Berat: Ruang Uji Internal (T x L x D): sekitar 850 × 850 × 830 mm Dimensi Eksternal (T x L x D): sekitar 1.900 × 1.120 × 1.875 mm Berat: sekitar 600 kg Tingkat Tekanan Suara: di bawah 58 dB(A) Peralatan: Layar Multi-sentuh Kapasitif Pengontrol Program Terintegrasi Operasi Nilai Tetap dan Program Ruang Uji Baja Tahan Karat, Bahan 1.4301 Jendela Penglihatan dengan Pencahayaan Interior Pengukuran Temperatur melalui Udara Masuk dan Keluar dengan Pt100 Pembatas Temperatur Perangkat Lunak Antarmuka Ethernet, RS232, dan USB Output Digital untuk Kontrol Sampel Uji Saluran Kabel Samping Pengunci Pintu yang Dapat Dikunci Desain yang Dapat Dipindahkan dengan Roda Saluran Pengeluaran Ruang Uji dan Kondensat Pemeriksaan Bengkel: Pemeriksaan Fungsi Dilakukan Koneksi Listrik dan Urutan Fase Diperiksa Fungsi Pemanasan dan Pendinginan Diperiksa Uji Kecepatan Dilakukan Komunikasi LAN dan Baterai Penyimpan Diperiksa Segel Pemeriksaan Dipasang Catatan: Unit ini adalah lemari uji temperatur. Tidak ada pengaturan kelembapan. Kondisi: Bekas / Used Kondisi Visual Sesuai Gambar Tanda-tanda penggunaan normal yang sesuai dengan usia dan penggunaan Lingkup Pengiriman: Lemari Uji Temperatur CTS T-70/600 Manual Operasi dan Dokumentasi Teknis Dokumen Uji dan Bengkel Aksesori Sesuai Gambar Meja yang ditampilkan di foto serta barang lain yang tidak disebutkan secara eksplisit tidak termasuk dalam penjualan. Pengiriman melalui perusahaan pengiriman dimungkinkan. Pemuatan menggunakan forklift dimungkinkan. Perubahan, kesalahan, dan penjualan antara waktu dapat terjadi.

Kondisi: sangat baik (bekas), CTS Type: C-40/350 Air-Cooled Climate Test Chamber For sale is a professional CTS climate test chamber, model C-40/350. This device is designed for demanding environmental simulations in industrial applications, making it ideal for material testing, electronics, automotive, aerospace, and research sectors. Temperature Testing: - Temperature range: -40°C to +180°C - Temperature deviation: ≤ ±0.3 K over time - Temperature change rate according to IEC 60068-3-5: - Heating: 3.5 K/min - Cooling: 4 K/min - Heat compensation: - approx. 3,500 W at +20°C - approx. 2,000 W at -20°C Climate Testing: - Temperature range: +10°C to +90°C - Humidity range: 10% to 95% relative humidity - Dew point range: +5°C to 78°C - Temperature deviation: ≤ 1.0 K over time - Humidity deviation: ≤ +3.0% rel. humidity over time Technical data are based on an ambient temperature of +25°C, nominal voltage 400V, without test specimen, without heat compensation and without additional equipment. Options may influence performance data. Technical Specifications: - Refrigeration unit: air-cooled, low-noise, fully hermetic, infinitely variable power adjustment via electronic monitoring and control system, eco-friendly refrigerant R404A - Test chamber floor load: 150 kg/m² - Shelf: stainless steel, usable area 620 x 600 mm - Max. shelf load: 35 kg Ljdpfozizmzsx Al Nshi - Max. total load with full shelf configuration: 100 kg Control: - 32-bit controller - LCD control panel - Digital display of set and actual values - Numerical input of set values - Plain text error messages - RS 232 interface - Ethernet interface - Free switching channels for user-side test item control Dimensions: - Test volume: 350 liters - Internal dimensions: height 750 mm × width 650 mm × depth 720 mm - External dimensions: height 1800 mm × width 920 mm × depth 1670 mm Operating Data: - Power supply: 400V 3/N, 50 Hz - Nominal power: 7.1 kW - Nominal current: 11.5 A - Protection class: IP 54 - Sound pressure level:

Kondisi: sangat baik (bekas), Hier we offer you a temperature test chamber. Water-cooled Technical specifications: Temperature operating range Temperature range in °C: -70 / +180°C Change rate according to DIN 50 011, Part 12 Cooling rate: approx. 5 K/min Lodeziyphepfx Al Nshi Heating rate: approx. 5 K/min Dimensions: Test chamber volume: 350 liters Test chamber dimensions (H x W x D): approx. 750 mm x 650 mm x 720 mm External dimensions (H x W x D): approx. 1800 mm x 850 mm x 1640 mm Operating data: Power connection: 400 V, 3/N, 50 Hz Rated power: 13.3 kW Refrigerant: R404A / R23 Weight: approx. 650 kg Model: TS-70/350 For your safety as a buyer, please note the following information! The following steps are performed on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. Refill with legally compliant refrigerant 3. After successful inspection, the chambers are subject to a test run monitored with calibrated equipment. Condition: used Scope of delivery: (see photo) (Technical data and specifications subject to change and error!) For further questions, we are happy to assist you by phone.

Kondisi: sangat baik (bekas), CTS TS-70/200-5/S Lemari Pengujian Suhu Produsen: CTS Clima Temperatur Systeme GmbH Tipe: TS-70/200-5/S Jenis Mesin: Lemari Pengujian Suhu / Lemari Pengujian Stress-Screening Volume Ruang Uji: sekitar 200 liter Yang ditawarkan adalah lemari pengujian suhu bekas dari CTS. Lemari pengujian ini cocok untuk pengujian suhu, stress-screening, simulasi lingkungan, pengujian material, penjaminan kualitas, serta pengujian pengembangan dan beban kerja. Data Teknis Rentang suhu: -70 °C hingga +180 °C Kecepatan perubahan suhu pemanasan: sekitar 8 K/menit Kecepatan perubahan suhu pendinginan: sekitar 6 K/menit Radiasi panas maksimum pada +20 °C: sekitar 3500 W Dimensi ruang uji: sekitar 650 x 400 x 750 mm (L x P x T) Dimensi keseluruhan: sekitar 920 x 1345 x 1800 mm (L x P x T) Berat: sekitar 550 kg Daya listrik: 400 V 3/N / 50 Hz Daya: 10,9 kW Arus nominal: 15,7 A Tingkat perlindungan: IP22 Refrigeran tahap pra-pendinginan: R404A Jumlah refrigeran pra-pendinginan: 2,5 kg Refrigeran tahap pendinginan: R23 Jumlah refrigeran pendinginan: 0,6 kg / 15 bar Tekanan kerja maksimum PS: 25 bar Tekanan uji PT: 20 bar Fitur Ljdpfx Alszf Hi Ho Nshi - Panel sentuh untuk pengoperasian - Jendela pengamatan pada pintu - Bagian dalam dari stainless steel - Pencahayaan dalam ruang uji - Lubang samping sesuai gambar - Rak uji / perlengkapan ruang uji sesuai gambar - Perlindungan benda uji dari suhu berlebih - Pengatur keamanan Eurotherm - Antarmuka RS232 - Dokumentasi / dokumen sesuai gambar Area Aplikasi - Pengujian suhu - Stress screening - Simulasi lingkungan - Pengujian material - Pengujian elektronik - Penjaminan kualitas - Penelitian dan pengembangan Lingkup Pengiriman 1x CTS TS-70/200-5/S Lemari Pengujian Suhu Rak uji / perlengkapan ruang uji Dokumentasi / dokumen yang tersedia Aksesori sesuai gambar Kondisi Bekas pakai Kondisi kosmetik sesuai gambar Lingkup pengiriman seperti diilustrasikan. Perubahan dan kesalahan data teknis serta penjualan antara waktu mungkin terjadi.

Kondisi: sangat baik (bekas), CTS TV-70/530 Lemari Uji Iklim Produsen: CTS Clima Temperatur Systeme GmbH Tipe: TV-70/530 Jenis Mesin: Lemari Uji Iklim / Ruang Shaker Volume ruang uji: sekitar 530 liter Dijual lemari uji iklim bekas dari produsen CTS Clima Temperatur Systeme GmbH. Sistem ini dirancang untuk pengujian kombinasi suhu dan getaran, cocok untuk simulasi lingkungan, pengujian material, uji elektronik, penjaminan mutu, serta pengujian pengembangan dan beban. Catatan: Shaker / penggetar tidak termasuk dalam penawaran. Data Teknis Dimensi ruang uji: sekitar 850 x 730 x 860 mm (L x D x T) Dimensi luar: sekitar 1450 x 2250 x 2000 mm (L x D x T) Berat: sekitar 1.200 kg Rentang suhu: -70 °C hingga +180 °C Kecepatan pemanasan: sekitar 5 K/menit Kecepatan pendinginan: sekitar 5 K/menit Refrigeran: R404A / R23 Daya terpasang: 16 kW Arus nominal: 29,1 A Perlengkapan Kamar shaker untuk pengujian kombinasi Ruang uji yang telah dipersiapkan untuk aplikasi getaran Sistem pendingin kaskade Pengujian suhu Aksesori sesuai gambar Ledozd Uq Ajpfx Al Nohi Area Aplikasi Pengujian suhu Pengujian kombinasi iklim dan getaran Simulasi lingkungan Uji elektronik Pengujian material Penjaminan mutu Penelitian dan pengembangan Ruang Lingkup Pengiriman 1x CTS TV-70/530 Lemari Uji Iklim Ruang lingkup pengiriman sesuai gambar Kondisi Bekas Kondisi visual sesuai gambar Shaker / penggetar tidak termasuk penawaran. Barang, mesin, atau aksesori lain yang tidak secara jelas dijelaskan tidak termasuk dalam pengiriman. Pengiriman seperti yang terlihat pada gambar. Perubahan dan kesalahan data teknis serta penjualan di tempat sebelumnya dapat terjadi.

Kondisi: sangat baik (bekas), CTS C-70/350 Climate Test Chamber Manufacturer: CTS Clima Temperatur Systeme GmbH Model: C-70/350 Device Type: Climate Test Chamber / Temperature and Humidity Test Chamber Test Chamber Volume: approx. 350 liters For sale is a pre-owned CTS C-70/350 climate test chamber from industrial use. This unit is suitable for temperature and climate tests, environmental simulation, material testing, electronics testing, quality assurance, as well as research and development. Technical Data: Temperature Range: -70 °C to +180 °C Climate Operating Range: +10 °C to +95 °C Lhodpfxszd D Nze Al Nji Humidity Range: 10% to 98% rH Dew Point Range I: +7 °C to +94 °C Dew Point Range II: -10 °C to +7 °C Temporal Temperature Stability: ≤ ±0.3 K Humidity Stability I: ≤ ±1.5% rH Humidity Stability II: ≤ ±3% rH Cooling Rate: approx. 3.5 K/min Heating Rate: approx. 3.5 K/min Max. Thermal Radiation at +20 °C: approx. 3000 W Test Chamber Dimensions: approx. 650 x 720 x 750 mm (W x D x H) External Dimensions: approx. 920 x 1665 x 1800 mm (W x D x H) Weight: approx. 550 kg Power Connection: 400 V, 3/N, 50 Hz Power Consumption: approx. 7.1 kW Rated Current per nameplate: approx. 11.5 A Protection class: IP22 Sound Pressure Level: < 58 dB(A) Refrigerants: Precooling stage: R404A, approx. 2.3 kg Cooling stage: R23 Operating Overpressure PS: 25 bar Test Pressure PT: 20 bar Equipment: - Touch control panel - Viewing window in the door - Interior made of stainless steel - Chamber illumination - Stainless steel shelves - Feedthrough Ø 50 mm, mid right - Capacitive humidity measurement system - Software temperature limiter Min. / Max. - USB port for data storage - Ethernet interface - RS232 interface - Air-cooled design - Documentation / operating instructions - Service / testing Condition: Used Optical condition as depicted in the images Normal signs of wear and storage present Scope of delivery CTS C-70/350 climate test chamber Shelves Control panel / controls Documentation / operating instructions Accessories as shown in the images Inspection possible by appointment. Shipping or freight forwarding possible. Scope of delivery as shown. Technical data subject to change and errors excepted. Subject to prior sale.

Kondisi: sangat baik (bekas), CTS Climate Test Chamber C-70/1000-S Device Data: Manufacturer: CTS GmbH Type: C-70/1000-S Design: Climate Test Chamber / Environmental Simulation Cabinet Cooling: water-cooled Description: Used CTS climate test chamber for precise temperature and climate testing. Suitable for material, component, and reliability testing. Applications in industry, research, development, and quality assurance. Temperature and Climate Data: Temperature range: -70 °C to +180 °C Temperature change rate: approx. 2.5 K/min heating Temperature change rate: approx. 2.5 K/min cooling Humidity range: 10% to 98% r.h. Dew point range I: +7 °C to +94 °C Dew point range II: -10 °C to +7 °C Electrical Data: 400 V / 3/N / 50 Hz Power: 9.7 kW Current: 17.9 A Protection class: IP 22 Refrigeration System: Refrigerant: R404A / R23 Pre-cooling stage: R404A, 2.3 kg Cooling stage: R23, 0.86 kg / 15 bar Operating overpressure PS: 25 bar Test pressure PT: 27.5 bar Features: CTS control unit with LCD display Program operation Digital display for set and actual values Observation window in the door Stainless steel test chamber Specimen protection / temperature limiter Internal lighting Side cable ports Ports approx. 50 mm and approx. 125 mm RS232 interface according to documentation Digital outputs for specimen control Mobile design on rollers Dimensions: Test chamber volume: approx. 1000 liters External (W x D x H): approx. 2245 x 1270 x 1950 mm Installation dimensions (W x D x H): approx. 2350 x 1290 x 2000 mm Weight: Test chamber: approx. 1000 kg Recooler: approx. 120 kg Documentation: Declaration of Conformity Test certificates Operating manual Status messages and digital channels Setup plan Quick guide Humidity chart Scope of Delivery: CTS climate test chamber C-70/1000-S Documentation as available Scope of delivery as shown Functional test Refrigerant service Leakage test Condition: Used. Condition as per images. Inspection available by appointment. Loading and transport can be organized upon request. Subject to changes and prior sale. Ljdey Iam Hepfx Al Nshi If you have any questions, please contact us.

Kondisi: sangat baik (bekas), CTS Klima Test Chamber C-70/600 Type: C-70/600 Manufacturer: CTS Klima Temperatur Systeme Version: air-cooled For sale is a CTS climate test chamber for temperature and climate testing in industry, research, development, and quality assurance. Condition / Display: Used device, see pictures for visual condition. Display in manual operation / stop. Actual temperature: 16.59 °C Set temperature: 5.00 °C Actual humidity: 39.7 % r.h. Water reservoir: 11.0 l Special Features: Extended temperature range up to +210 °C (many standard models only up to +180 °C) Technical Data: Temperature range: -70 °C to +210 °C Humidity range: 10 % to 98 % r.h. Dew point range: -10 °C to +94 °C Temperature change rate: approx. 2.5 K/min (heating/cooling) Test chamber volume: approx. 600 liters Electrical Data: Connection: 400 V / 3/N / 50 Hz Rated power: approx. 9.0 kW Rated current: approx. 14.6 A Protection class: IP 22 Refrigeration system: Refrigerant: R452A / R23 Cascade refrigeration system for low temperatures down to -70 °C Pressure Data: Operating overpressure: 25 bar Test pressure: 27.5 bar Test Chamber: Internal dimensions: approx. 850 x 850 x 830 mm Dimensions: approx. 1900 x 1115 x 1850 mm Weight: approx. 800 kg (depending on configuration) Features: Observation window Lhedpfxoy I Tdxs Al Noi Stainless steel test chamber Digital setpoint/actual value display Test item protection / temperature limiter Deionized water connection Condensate drain Tube ports RS232 interface Digital outputs for controlling test items Scope of delivery: CTS climate test chamber C-70/600 Scope of delivery as shown Service / Preparation: Functional check and replacement of necessary components Refill with legally compliant refrigerant (if necessary) Leak test with certificate Documented test run Miscellaneous: Inspection possible by arrangement Loading can be organized Commercial sale (Technical data subject to change and errors excepted!) Further questions can be answered by phone.

Kondisi: sangat baik (bekas), Vötsch VC³ 4018-M, Lemari Pengujian Iklim untuk Produk Kulit, -40 °C hingga +180 °C, 190 liter, 10–98 % RH, Vaisala dan SIMPATI® Model Khusus yang Dimodifikasi untuk Pengujian Kulit Rentang Suhu: -40 °C hingga +180 °C Volume Ruang Pengujian: sekitar 190 liter Rentang Kelembapan: 10–98 % RH Pendinginan: didinginkan dengan air Dijual sebuah lemari pengujian iklim dan suhu Vötsch VC³ 4018-M bekas dengan fungsi kelembapan. Perangkat ini cocok untuk pengujian suhu dan iklim, simulasi lingkungan, pengujian material, jaminan kualitas, serta pengujian pengembangan dan ketahanan. Model khusus "-M": Tambahan model "-M" menunjukkan model yang dimodifikasi untuk pengujian pada kulit dan produk kulit. Rentang iklim yang diperluas hingga +120 °C pada 10 % RH. Sistem pengukuran kelembapan kapasitif Vaisala Sambungan udara bertekanan / GN2 K3000 Panel sentuh 3,5 inci sebagai pengganti panel 8 inci standar Panel sentuh di pintu ruang pengujian Data Teknis: Produsen: Vötsch Industrietechnik GmbH Tipe: VC³ 4018-M Ruang Pengujian (L × P × T): sekitar 580 × 450 × 750 mm Dimensi Eksternal (L × P × T): sekitar 870 × 1.550 × 1.800 mm Berat: sekitar 470 kg Pemanasan: sekitar 4 K/menit Pendinginan: sekitar 4 K/menit Kompensasi panas maks.: sekitar 2.300 W Deviasi suhu: ±0,1 hingga ±0,5 K Lhjdpfx Aljzna N Es Nji Homogenitas suhu: ±0,5 hingga ±1,5 K Data Iklim: Rentang iklim standar: +10 °C hingga +95 °C Rentang titik embun: -3 °C hingga +94 °C Deviasi kelembapan: ±1 hingga ±3 % RH Kompensasi panas, pengoperasian iklim: sekitar 400 W Rentang iklim khusus, pengujian kulit: hingga +120 °C pada 10 % RH Data Pendingin dan Sambungan: Refrigeran: R404A, volume pengisian: 1,6 kg ND maks.: 22,5 bar g, HD maks.: 25 bar g Sambungan jaringan: 3/N/PE AC 400 V ±10 % / 50 Hz Daya nominal: 4,1 kW, arus nominal: 14 A Peralatan: ControlPad 3,5 inci Sistem pengukuran kelembapan Vaisala Sambungan udara bertekanan / GN2 K3000 Sambungan untuk air demineralisasi Jendela penglihatan dan ruang pengujian baja tahan karat Pencahayaan ruang pengujian 2 × 24 V / 50 W Lubang kabel Ø 125 mm dan Ø 50 mm 3 rak Perangkat Lunak SIMPATI® Versi 2016 dengan 2 lisensi perangkat Sertifikat keaslian dan manual pengoperasian asli Dokumen pengujian dan aksesori sesuai gambar Kondisi dan Cakupan Pengiriman: Bekas / Used, kondisi visual sesuai gambar. Cakupan pengiriman: Vötsch VC³ 4018-M, 3 rak, manual pengoperasian, dokumen lisensi SIMPATI®, sertifikat keaslian Aksesori sesuai gambar. Barang-barang yang tidak disebutkan secara eksplisit tidak termasuk dalam penawaran. Pengiriman dengan jasa pengiriman dimungkinkan berdasarkan kesepakatan. Perubahan, kesalahan, dan penjualan antara waktu pengumuman dan transaksi dicadangkan.

Kondisi: sangat baik (bekas), ESPEC Lemari Uji Iklim PL-3KPH Data Perangkat Produsen: ESPEC Tipe: PL-3KPH Model: Lemari Uji Iklim Pendinginan: pendinginan udara Deskripsi Lemari uji iklim bekas dari ESPEC. Cocok untuk pengujian suhu dan kelembapan. Digunakan dalam penelitian, pengembangan, dan pengendalian kualitas. Kondisi Operasi Tampilan: STOP / siap operasi. Data Teknis Model: PL-3KPH Volume ruang uji: sekitar 400 liter Rentang suhu: -40 °C hingga +180 °C Kecepatan perubahan suhu (pemanasan): sekitar 3,4 K/menit Kecepatan perubahan suhu (pendinginan): sekitar 1,7 K/menit Stabilitas suhu (-40 °C hingga +100 °C): ±0,3 K Stabilitas suhu (+100,1 °C hingga +150 °C): ±0,5 K Stabilitas suhu (+150,1 °C hingga +180 °C): ±1,0 K Rentang kelembapan: 20 hingga 98 % RH Stabilitas kelembapan: ±2,5 % RH Dimensi Bagian dalam (L x T x D): 600 x 850 x 800 mm Bagian luar (L x T x D): 1010 x 1690 x 1195 mm Data Listrik 400 V / 3~ / 50 Hz Sistem Pendingin Refrigeran: R404A Pendinginan udara (tidak memerlukan sambungan air eksternal) Berat sekitar 350 kg Fitur Panel kontrol layar sentuh Operasi program dan operasi konstan Kontrol suhu dan kelembapan BTHC Jendela observasi Ruang uji baja tahan karat Pencahayaan internal Pemasukan kabel Perlindungan terhadap panas berlebih Penghitung jam Model industri Lingkup pengiriman ESPEC Lemari Uji Iklim PL-3KPH Lingkup pengiriman seperti yang ditunjukkan pada gambar Servis sebelum pengiriman (opsional) Lodpfx Aljy H H Iuo Nohi Pengujian fungsi Servis refrigeran Pengujian kebocoran Pengujian dengan protokol Kondisi Bekas. Kondisi seperti yang terlihat pada gambar. Catatan Pemuatan dan transportasi dapat diatur sesuai permintaan. Perubahan dan penjualan antara dapat terjadi. Jika ada pertanyaan, jangan ragu untuk menghubungi kami.