Beli Dübelbor-Maskin Ganner Optima 21 bekas (7.947)

Kondisi: bekas, Tahun pembuatan: 1997, gebrauchtmaschine-1997 Pgedpfxoy Tczks Abwjn

Kondisi: bekas, Tahun pembuatan: 1997, Mesin bekas Tahun pembuatan: 1997 Kondisi: terawat Perlengkapan dan data teknis: Pedpfexwz Ihsx Abwsgn - Jumlah spindle bor: 21 unit, jarak 32 mm - Arah pengeboran: dari bawah & sisi depan - Sudut putar: 0-90 derajat dengan roda tangan - Penjepit material pneumatik: 3 unit - Bukaan maximal: tinggi 100 mm dan lebar 640 mm - Motor: 1,5 kW - Diameter saluran hisap: 120 mm - Termasuk berbagai pembatas (lihat gambar) Ketersediaan: segera Lokasi penyimpanan: Röllbach

Kondisi: bekas, Tahun pembuatan: 1996, Kepala bor 21 spindel, jarak 32 mm Lebar kerja: 640 mm Bukaan portal: sekitar 750 mm Langkah pengeboran: 100 mm Penyesuaian posisi unit bor: 0-45 mm Penyesuaian posisi deret lubang: 0-300 mm Kecepatan putar spindel: 2800 rpm Diameter tangkai mata bor: 10 mm Tinggi penjepitan benda kerja: maks. 100 mm Motor: 1,5 kW Tinggi kerja: 850 mm Sambungan udara tekan: 6 bar Berat: sekitar 400 kg Lokasi penyimpanan: Nattheim Podjy Dd I Hspfx Abwegn

Kondisi: bekas, Tahun pembuatan: 2024, Dowel Boring Machine GANNOMAT 'DB 21400V', 3Ph, 50Hz / 1.5 kW, fully equipped in standard configuration with: Podpfjxnlfljx Abwogn - Fully automatic electronic control with pulse operation via foot valve: clamping – drilling – releasing, plus electrical skip cycle function. - Automatic return of the drilling unit after reaching the preset drilling depth. - Automatic extension of drilling depth when drilling from the edge. This eliminates the need to adjust the drilling depth when switching from face to edge drilling (+10 mm, e.g. for dowel length 35 mm, face drilling depth 14 mm and edge drilling depth 24 mm). - 1 drilling beam with 21 spindles, 32 mm pitch, motor 1.5 kW (feed 0–70 mm), incl. 21 quick-change chucks (Ganner system) for easy bit change. - Simple swivel motion of the drilling unit from 0° to 90° supported by gas cylinder. - 1 clamp carrier, movable along the Y-axis, with 3 pneumatic clamps for workpiece height up to max. 80 mm. Ideal stop system including: - 1 stop rail, 1800 mm, for shelf drilling (aluminum profile 40x40 mm) with 3 flip stops, - Quick-change system, easily switchable from right to left stops for mirror-image drilling of shelves in carcass construction; also suitable for line boring in 32 mm system. - Side stops and position adjustments, as well as drilling height positioning over the support table with mechanical digital counters. - Side stops can be easily swung away for quick conversion between carcass, frame, and line boring. - Clamping arms for clamp carrier suitable for line boring positions up to max. 300 mm. - Ideal three-stage tool system. - 1 set of dowel drill bits: - 5 carbide dowel drill bits, Ø 8x77 mm, right - 4 carbide dowel drill bits, Ø 8x77 mm, left Basic machine Dowel Boring Machine GANNOMAT 'DB 21400V', 3Ph, 50Hz / 1.5 kW completely in standard version with: - Fully automatic electronic control with pulse operation via foot valve for clamping – drilling – releasing, with electrical skip cycle. - Automatic return of the drilling unit after reaching the preset drilling depth. - Automatic drilling depth extension for edge drilling (as above). - 1 drilling beam with 21 spindles, 32 mm pitch, motor 1.5 kW (feed 0–70 mm), incl. 21 quick-change chucks (Ganner system). - Simple swivel of the drilling unit from 0° to 90° supported by gas cylinder. - 1 clamp carrier movable on Y-axis with 3 pneumatic cylinders for workpiece up to max. 80 mm height. - Ideal stop system as above (1800 mm stop rail, 40x40 mm aluminum profile, 3 flip stops, quick change from right to left for mirrored shelf drilling; also usable for 32 mm system line boring). - Side stops and position adjustments, and drilling height setting above the support table via mechanical digital counters. - Side stops easily swiveling away for fast changeover between carcass, frame, and line boring. - Clamping arms on clamp carrier for row positions up to max. 300 mm. - Ideally structured three-stage tool system. - Extraction funnel, dust-tested, ø 120 mm - 1 set for line boring in 32 mm system

Kondisi: bekas, Tahun pembuatan: 2014, complete in standard configuration with: - Fully automatic electronic control with foot pedal for clamping, drilling, and releasing; electric intermittent operation - Automatic retraction of the drilling unit after reaching the set drilling depth - Automatic extension of the drilling hole depth for end-grain drilling saves re-adjustment of the drilling depth when switching from flat-surface to end-grain drilling. (+10 mm, e.g., with dowel length 35 mm, drilling depth flat side 14 mm, drilling depth end side 24 mm) - 1 drilling beam with 21 spindles, 32 mm pitch, 1.5 kW motor (drilling feed 0-70 mm) including 21 quick-change chucks (System Ganner) for easy drill bit changes Pjdpfxsyyxkhj Abwsgn - Easy swivel of the drilling unit from 0° to 90°, assisted by gas cylinder - 1 clamping beam, movable along Y-axis, with 3 pneumatic clamping cylinders for workpiece height up to max. 80 mm - Ideal stop system comprising: - 1 stop rail 1800 mm for shelf drilling (aluminium profile 40x40 mm) with 3 drop-in stops, with quick-change system, easily switchable from right to left stop side for mirrored shelf drilling in carcass construction, also suitable for series drilling in System 32 - Side stops and position settings, as well as drilling height setting over support table via mechanical digital counters - Side stops can be easily swung away for the shortest possible changeover between carcass, frame, and line boring - Clamping arms for clamping beam designed for line boring positions up to max. 300 mm - Ideal three-stage... (weight: approx. 400 kg gross, approx. 350 kg net) Dimensions: (L x W x H) 1.35 m x 1.25 m x 1.40 m Equipment: - 1 dust extraction funnel, dust-tested, ø 120 mm - 1 set for series drilling in System 32, complete with: - 1 base rail 1050 mm (aluminium profile 40x40 mm) - 1 setting gauge for series drilling - 1 frame dowel device, complete with: - 1 central stop - 1 round stop bar, 850 mm long - 2 stops Location: Nattheim

Kondisi: baik (bekas), Tahun pembuatan: 1999, Fungsionalitas: berfungsi sepenuhnya, For sale is a high-quality dowel boring machine GANNOMAT OPTIMA 21, type 510, manufactured in 1999. The machine operates cleanly and precisely, making it ideal for dowel joints, line boring, and carcass processing. Pgsdpfjy Szhyox Abwen Technical Data: + Manufacturer: GANNOMAT / Ganner + Model: OPTIMA 21 + Type: 510 + Year of manufacture: 1999 + 21 drilling spindles + 32-mm system + Drilling width: approx. 640 mm + Pneumatic workpiece clamping + Horizontal and vertical boring possible + Foot pedal operation + Spindle speed: approx. 2,800 rpm + Motor power: approx. 1.5 kW + Connection: 400 Volt three-phase current + Compressed air connection required + Robust industrial design + Weight: approx. 400 kg Condition / Features: + Fully functional + Well-maintained condition + Immediately ready for use + Heavy-duty professional build + Precise stops and easy operation Perfectly suited for: - Furniture manufacturing - Kitchen production - Interior fittings - Carcass production - Series drilling - Dowel connections Price: €2,950 net Inspection and test run possible at any time by appointment. Loading can be assisted, or shipping via freight forwarder. You will receive an invoice with shown VAT.

Kondisi: bekas, Tahun pembuatan: 2018, jam operasional: 1.850 h, tinggi total: 2.200 mm, panjang total: 4.550 mm, lebar total: 2.200 mm, Color: White Net weight: 3,000 kg - Year of manufacture: 2018 - Documentation available: No - CE marking present: Yes - CE certificate available: Yes - Serial number: AH00000267 - Operating hours: 1850 - Number of milling spindles [pcs]: 1 - Type of milling table: Beam table - Tool clamping system: HSK-F63 - Drilling tool included: Yes - Saw unit included: Yes - Safety feature: Safety fence - Vacuum pump included: Yes - Quantity [pcs.]: 1 - Brand: Becker - Main motor power [kW]: 2.2 - Connection diameter [mm]: 33 - Oil-free: Yes - Working area X [mm]: 3050 - Working area Y [mm]: 1250 - Z-axis working stroke [mm]: 130 - Installed length [mm]: 7000 Pjdjy U Hmyepfx Abwegn - Installed width [mm]: 4000 - Installed height [mm]: 2400 - Transport dimensions: 4550mm x 2200mm x 2200mm (l x w x h) - Transport weight [kg]: 3000kg - Transport packages [pcs.]: 3 Financial Information VAT: The stated price is plus VAT VAT/ differential taxation: VAT deductible for businesses Delivery and trade-in possible at any time for everything from the industrial sector. Glenn Smeets

Kondisi: sangat baik (bekas), Tahun pembuatan: 2013, Fungsionalitas: berfungsi sepenuhnya, - Working area: 3050x1250mm - Main spindle: 11/13kW (S1/S6) - C-axis - Drills: 8x vertical, 2+2 horizontal - Grooving saw Podjwiuz Uspfx Abwjgn - Tool magazine: 10 positions

Tahun pembuatan: 1980, Kondisi: bekas, Dijual mesin pengurai gulungan otomatis KENSA MASKIN SA 800, dirancang untuk lembaran sempit, pita baja, dan kawat. Pgodpfjzg Tdmjx Abwsn Mesin bekas, dengan konstruksi industri yang kokoh. Dikendalikan oleh motor listrik dan dirancang untuk pemberian material otomatis ke lini produksi. Sangat cocok untuk lini produksi otomatis seperti profiling, stamping, rolling, pengolahan kawat, dan aplikasi serupa lainnya. Spesifikasi teknis: Produsen: Kensa Maskin Model: SA 800 Tahun pembuatan: 1980 Penggerak: Listrik Berat gulungan maksimum: 500 kg Diameter luar gulungan maksimum: 800 mm Diameter dalam gulungan minimum: sekitar 400 mm Lebar gulungan maksimum: 500–800 mm (tergantung konfigurasi) Pemberian material otomatis Konstruksi industri yang kuat Silakan hubungi kami jika Anda memiliki pertanyaan lebih lanjut.

Kondisi: bekas, Tahun pembuatan: 1985, Mesin bekas Pedpewka Hfjfx Abwjgn Tahun pembuatan: 1985 Perlengkapan dan data teknis: - Untuk pengeboran konstruksi secara horizontal dan vertikal - Untuk pengeboran deret lubang secara vertikal dengan pola 32 mm - Unit pengeboran vertikal dengan kepala bor poros ganda, dapat diposisikan bebas pada poros indeks - Motor 1,5 kW dengan 1400 rpm - Motor 1,5 kW dengan 2800 rpm - Kepala bor dengan pengangkat pneumatik - Penjepit material pneumatik - Lebar buka sekitar 850 mm - Termasuk berbagai stop dan mata bor Ketersediaan: segera Lokasi: Röllbach

Kondisi: bekas, Tahun pembuatan: 1986, Mesin bekas Tahun pembuatan: 1986 Perlengkapan dan data teknis: - dengan kepala bor deret lubang dengan 7 spindle dan pin penahan - jarak antar lubang 32 mm - dengan kepala bor untuk engsel BLUM Pedpfx Aboyncppowegn - dengan kepala bor untuk engsel Hettich - dengan masing-masing matriks penekan - Motor 400 V, 0,75 kW, 2800 rpm - dengan batang pembatas Ketersediaan: segera Lokasi penyimpanan: 63934 Röllbach

Kondisi: bekas, Mesin bekas Mesin bor lubang deret bekas merek Ganner tipe RB 107 No. mesin: 121627 Daya motor: 1,5 kW Kecepatan motor: 2800 rpm 1 balok bor dengan 26 spindel, jarak sumbu 32 mm Pgedpow I Unwjfx Abwjn 3 penahan benda kerja 1 saklar kaki Ketersediaan: segera Lokasi: Röllbach

Kondisi: bekas, Tahun pembuatan: 1993, Mesin bekas Tahun pembuatan: 1993 Perlengkapan dan data teknis: Psdpfx Abjw I Uy Towsgn Chuck bor 2-rahang hingga Ø tangkai 20 mm Penyesuaian posisi pneumatik pada 2 level 0-100 mm Kedalaman bor maksimum 150 mm Rel raster presisi 12 mm Kunci tengah dan penyesuaian melintang 2 silinder penjepit pengaman pneumatik Motor 1,5 kW Kecepatan 2800 rpm Perangkat bor lubang panjang dapat diturunkan dengan 2 cam program Berat mesin sekitar 310 kg Ukuran mesin (P x L x T) 1100 x 1100 x 1500 mm (tanpa penyangga) Ketersediaan: segera Lokasi: Röllbach

Kondisi: bekas, Tahun pembuatan: 2014, Used machine Year of manufacture: 2014 Equipment and Technical Data: Fully in standard configuration with: - Support with linear guide, consisting of: 1 pc. single-spindle horizontal drilling unit, motor 0.65 kW, stroke 70 mm Tool speed selectable via operator software (3,000/5,000/8,000 rpm) 1 pc. blow-out, gluing and dowel insertion station for dowels Ø8 mm, dowel length 25-50 mm - Fully automatic, electronically controlled central lubrication - X-axis NC controlled, with working length 1,300 mm, travel speed max. 105 m/min - Z-axis adjustable manually via mechanical digital counter, position via support table 5-40 mm - Dowel insertion overhang adjustable from 7-20 mm via mechanical digital counter, drilling depth 0-35 mm (with drill length GL 70 mm) automatically set with dowel overhang - Closed gluing system with 6 bar glue pressure through gluing nozzle, for adhesives with viscosity 150 to 350 mPas - Glue quantity continuously adjustable via operator software - Selector switch GLUE/WATER for rinsing the gluing system, each with: 1 stainless steel tank for 7.5 kg glue and 7.5 l water - Control lamp for glue level indicator in glue tank - 1 pc. side stop left, 1 pc. side stop right, and 1 pc. center stop (all removable) - 4 pcs. start buttons for individual operation with 1-4 workpieces - 4 pcs. pneumatic angled clamping cylinders 10°, for workpiece thicknesses up to max. 80 mm, workpiece length (Y) min. 70 mm - 1 pc. extraction funnel, connection Ø80 mm 1 pc. TCT control with: built-in industrial PC incl. Soft PLC Beckhoff TWINCAT, operating temperature range 0-50°C, 15” capacitive TFT industrial touchscreen display, operating system: WINDOWS 7 - Programming via menu-driven user software, drilling distances freely programmable with ABSOLUTE, RELATIVE or GRID dimensions, automatic workpiece mirroring and operation cycle optimization, 4 work areas assignable with different programs, graphical workpiece display, parametric programming, 0-point offset, programmable operation lists, fault diagnosis with plain text Options: 1 Electronic, optical glue monitoring system G.I.C. (Glue Insert Control) for 1 pc. glue nozzle 1 Z-axis with NC-controlled dynamic positioning for height adjustment of drilling and dowel insertion station (programmable from 5-40 mm) Travel speed max. 30 mm/sec. Psdjy Ih Skjpfx Abwsgn 1 Single-spindle vertical drilling unit, top drilling, 0.65 kW (3,000/5,000/8,000 rpm), position (Y) manually adjustable via mechanical digital counter from 5-40 mm, drilling depth (Z) max. 30 mm (with drill length GL 57 mm) Workpiece thickness (Z) max. 50 mm, workpiece length (Y) min. 130 mm (incl. drilling depth compensation, e.g. for Häfele Minifix) 4 vertical angled clamping cylinders 10° with holder, additional 1 keyboard with holder Availability: by arrangement; currently being overhauled at Ganner factory Location: Austria

Tahun pembuatan: 2025, Kondisi: baru, new machine year of manufacture: 2025 features and technical specifications: complete in standard version with: - sturdy, torsion-resistant frame made of steel, welded and bolted construction - upper slat press beam with 6 elements, lateral slat press beam with 5 elements - slat press beams with field-proven tolerance compensation (Ganner system) for tightly compressed carcass joints - counter-pressure surfaces (side pressure wall, base) are continuous 38 mm thick coated bearing plates - continuous pressing surface with a height of 95 mm at the lower vertical press beam - electric motor adjustment of both press beams via precision trapezoidal threaded spindles (with increased pitch and concentricity accuracy) and high-performance carriage nuts with grease reservoir - pressing is performed electromechanically via 2 separate worm gear motors (2 x 0.75 kW) - the pressing force of the press beams is infinitely electronically adjustable by 2 potentiometers and controlled via frequency inverters, making the pressing force control completely wear-free - pressing force for horizontal press beam: min. 500 daN (kg) up to stepless max. 2200 daN (kg) - pressing force for vertical press beam: min. 300 daN (kg) up to stepless max. 2200 daN (kg) Psdpfxsw Nafke Abwegn - pressing and adjustment speed of the press beams with fine positioning, via 3-step selector switch 5 / 10 / 25 mm/sec - inching operation for precise positioning of both press beams, e.g. for low pressing forces, drawers, and carcasses at 45° - very simple operation via 6 separate pushbuttons, 8 movement sequences selectable via control system - freely adjustable pressing time preselection 0-30 min (switchable to seconds or hours) with individually programmable opening dimensions of both press beams - post-press function to increase or reduce the pressing force during the pressing process - working height/feeding height: 300 mm - working dimensions: length min: 150 mm, max: 2500 mm; height min: 150 mm, max: 1400 mm; depth: 700 mm including extra charge for rapid traverse speed for quick positioning of the press beams, controlled by automatic workpiece detection with sensors in the press beams, pressing speed 5 / 10 / 25 mm/sec and rapid traverse speed 50 mm/sec, the sensors can be deactivated for pressing special parts including set of machine feet for 500 mm working height location: flörsheim availability: short notice

Tahun pembuatan: 2025, Kondisi: baru, New machine Year of manufacture: 2025 Features and Technical Data: Standard configuration: - Robust machine base - Dowel system for: - Dowel diameter: 8 mm - Dowel length: 35 mm (factory setting, adjustable from 30 to 40 mm) - Dowel protrusion: 12 mm (factory setting, adjustable from 7 to 20 mm) - Recoil-free insertion gun - Vibratory feeder for dowel transportation - Dowel diameter and length monitoring with Auto-DL-Selekt system Pgodpfx Aswx Aadebwen - Water supply system for pre-glued dowels: - Water tank (stainless steel, 7.5 L) - Closed water system with 6 bar water pressure and spray nozzle - Electronic controls featuring: - Main switch On/Off - Program selector switch for Water / Water + Insertion - Potentiometer for dowel feed via vibratory feeder - Potentiometer for water injection volume - Indicator light for minimum water level in tank - Chassis - Compressed air: 6 bar / Electrical: 230V, 1Ph, 50Hz HoKuTech DübelJet with option for counter hole processing: 1 unit HoKuTech | DübelJet with LeimJet expansion kit Including mounting/connectors for use in the DübelJet Including height-adjustable support for glue hose Including: 1 HoKuTech | LeimJet Glue application device for counter hole processing Suitable for PVAc glues up to 75,000 mPas viscosity Incl. dowel nozzle for Ø 8 mm, pointed nozzle Location: Flörsheim Availability: Immediately

Kondisi: bekas, Used Machine Pre-owned Line Boring Machine Ganner Compact 30 Features and Technical Specifications: - 2 drilling beams, each with 15 spindles - 32 mm pitch - Drilling unit position adjustment: 0 – 650 mm - Minimum distance between rows of drilled holes: 190 mm - Spindle speed: 2,800 rpm - Motor power: 2 x 0.75 kW - Maximum clamping height of workpieces: 70 mm - Working height: 850 mm - Compressed air connection: 6 bar Availability: By arrangement Pgedpfx Aewhuh Sebwjn Location: Solingen

Kondisi: bekas, Tahun pembuatan: 2018, 1 piece CNC-controlled drilling, gluing, and dowel insertion machine GANNOMAT "INDEX 130 PRO" (with options as Index 180 Pro), 400V, 3-phase, 50Hz, complete in standard configuration with: - Support with linear guide comprising: * 1 pc. single-spindle horizontal drilling unit, 1.1 kW motor, tool speed selectable via operator software (3000/5000/8000 rpm) * 1 pc. blow-out, gluing, and reinforced dowel insertion station for Ø 8 mm dowels, dowel length 30 mm - Fully automatic, electronically controlled central lubrication - X-axis NC controlled, working length 1300 mm, max. traversing speed 78 m/min - Z-axis, position programmable via support table 5-40 mm; with option for NC-controlled Z-axis - Programmable dowel projection 7-20 mm; with option for NC-controlled Y-axis * Drilling depth 0-35 mm (with drill length 70 mm) automatically set to dowel projection - Closed gluing system: 6 bar glue pressure via glue nozzle, for glues with viscosity 150 to 350 mPas - Glue quantity steplessly adjustable via operator software - Selector switch GLUE/WATER for flushing glue system; each with 1 stainless steel container for 5 kg glue, and 5 l water - Control lamp for glue level indication in glue container Pgjdpfx Asxwaz Hjbwjn - 1 pc. left side fence, 1 pc. right side fence, and 1 pc. center fence (all removable) - 4 pcs. start buttons for individual processing of 1-4 workpieces - 4 pcs. pneumatic tilting vertical clamps 10° for workpiece thickness up to max. 80 mm; workpiece length (Y) min. 70 mm - 1 pc. extraction funnel, connection Ø 80 mm - 1 pc. TCT control system with: * Built-in industrial PC, incl. Beckhoff TWINCAT Soft PLC * Operating temperature 0-50°C * 15" resistive TFT industrial touchscreen display, resolution 1024 x 768 * CPU 2 GHz, 256 MB RAM * 2x network adapters, IDE hard disk, 4x rear USB, 1x front USB * Operating system: WINDOWS 7 - Programming via user-friendly software menu, freely programmable drilling positions by ABSOLUTE, RELATIVE, or GRID coordinates, automatic workpiece mirroring and process optimization, 4 operator fields for different programs, graphical workpiece representation, parametric programming, zero-point shifting, programmable work lists, plain-text error diagnostics OPTIONS: - 1 Electronic glue monitoring system G.I.C. (Glue Insert Control) for 1 glue nozzle - 4 additional 10° vertical tilting clamps with holder (total 8 clamps) - Surcharge for machine bed length 1800 mm (working length 1800 mm) - Surcharge for: * 1 horizontal drilling unit, 1.5 kW motor, multi-spindle drilling head with 3 individually selectable spindles, 32 mm pitch, X-axis arrangement, tool speed 3000 rpm (standard working length remains unchanged) - Y-axis NC controlled, with ball screw drive and dynamic speed 300 mm/sec; software programmable for dowel projection 7-30 mm and drilling depth 0-42 mm (with drill length 77 mm) for vertical drilling unit (top drilling), Y-axis position 5-42 mm - Surcharge for NC-controlled Y-axis, position 5-62 mm instead of 5-42 mm - Surcharge for: * 1 vertical drilling unit (top drilling), 1.5 kW motor, multi-spindle drilling head with 3 individually selectable spindles, 32 mm pitch, X-axis arrangement, tool speed 3000 rpm; Y-axis position 5-42 mm, workpiece length (Y) min. 130 mm (standard working length remains unchanged) - 1 NC-controlled Z-axis, with K

Kondisi: bekas, Tahun pembuatan: 2008, nomor mesin/kendaraan: 0-411-49-1873, Data teknis: - Produsen: Bütfering - Tipe: Optimat SGO 211/RC Podpfx Abjyh Hwuswogn - Jumlah agregat pengamplasan: 2 unit - Tahun pembuatan: 2008 - Lebar kerja: 1.100 mm - Lebar belt amplas: 1.120 mm - Panjang belt amplas: 1.900 mm - Ketebalan benda kerja: 3–160 mm - Kecepatan langkah: 2,5–13 m/menit - Berat: 1.800 kg - Penyesuaian tinggi meja Perlengkapan standar: - Penyesuaian otomatis ketebalan benda kerja - Kecepatan langkah variabel tanpa tingkat melalui inverter frekuensi - Dapat menyimpan 125 program pengamplasan - Sistem rem bebas aus Agregat pengamplasan 1 (R): - Roller kalibrasi - Roller kontak baja berprofil - Diameter 160 mm - Motor penggerak: 15 kW Agregat pengamplasan 2 (C): - Agregat kombinasi dengan roller dan sepatu amplas - Roller kontak berlapis karet 65 Shore - Diameter roller kontak 160 mm - Balok penekan elektronik dengan lebar segmen 35 mm - Kecepatan belt: 12 dan 21 m/dtk - Kompensasi toleransi hingga 1 mm - Cocok untuk permukaan berlapis veneer dan kayu solid - Motor penggerak: 11 kW - Daya terpasang total: sekitar 28 kW - Tegangan operasi: 400 V / 50 Hz - Konsumsi udara tekan pada 6 bar: 20 L/menit - Sistem peniup belt per tekanan udara: 440 L/menit - Volume ekstraksi: sekitar 2.880 m3/jam pada 20 m/dtk - Koneksi ekstraksi: 1 x Ø 160 mm (agregat pengamplasan, roller) 1 x Ø 160 mm (agregat pengamplasan, sepatu) Dimensi: - Panjang: 1.700 mm - Lebar: 1.850 mm - Tinggi: 2.100 mm - Lokasi: tidak tersedia di gudang - Tersedia mulai Juli 2026

Kondisi: sangat baik (bekas), Tahun pembuatan: 2020, Fungsionalitas: berfungsi sepenuhnya, Likuidasi pabrik produksi masker. Instalasi tahun 2021, tidak beroperasi sejak Maret 2022. Peralatan sudah dibongkar dan siap dikirim. Optima CMF: Mesin pengemasan Aplikasi: Untuk membentuk dan menutup kotak karton lipat, ideal untuk kebutuhan karton vertikal yang kompleks. Produk: Cocok untuk produk kosmetik seperti losion, botol make-up, dan jar krim. Fungsi: Menggunakan robotika untuk penempatan produk dan aksesori yang presisi, seperti spatula, brosur, atau lembar flip-flop. Pjdpoxqf U Sofx Abwsgn Fleksibilitas: Juga dapat dikonfigurasikan untuk produk makanan dan kimia pada versi mesin lainnya.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2008, Working width: 1,100 mm Workpiece thickness: 3 – 160 mm Abrasive belt dimensions: 1,120 x 1,900 mm Variable feed speed: 2.6 – 13 m/min Feed motor power: 1.10 kW, 400 V, 50 Hz Extraction connection diameter: 2 x 160 mm Compressed air supply: 6 bar Pgedpfx Abeychqzswjn Dimensions (L x W x H): 1,705 x 1,545 x 1,905 mm 1st Unit: Steel contact roller, diameter 160 mm Motor power: 15 kW, 400 V, 50 Hz 2nd Unit: Combination unit, rubber-coated contact roller Sh 65, fixed sanding shoe Motor power: 11 kW, 400 V, 50 Hz Abrasive belt cleaning via compressed air 3rd Unit: Cleaning brush Multifunction display Multifunction lever (conveyor belt, workpiece thickness adjustment) Electronic belt oscillation Conveyor belt oscillation pneumatically Motorized workpiece thickness adjustment with LED display (increments of 0.1 mm) Units with emergency braking device Emergency stop button at infeed & outfeed Motor protection switch Infeed roller table extension with 2 idle rollers Automatic star/delta start Complete documentation Note for used machines: • Technical data subject to error and prior sale. • Quoted prices are ex works – loaded free of charge! • The machines have been cleaned and function tested. • All machines are sold as seen, without any warranty claims. Buyers are welcome to inspect machines at the location. • Special agreements are only valid in written form. (Inquiries will only be answered if you provide your address and telephone number!)

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2024, en-1 Pgjdpfx Abjb Eln Dewon

Kondisi: baru, Tahun pembuatan: 2026, Gannomat Concept 70 Eco Lamella Body Press with Rapid Traverse Technical Data: Lamella body press from our showroom Working range: width from 150 - 2,500 mm, height from 150 - 1,400 mm, depth 700 mm - Upper lamella pressure beam with 6 elements, side lamella pressure beam with 5 elements - Lamella pressure beams with industry-proven tolerance compensation for tightly pressed carcass joints - Counterpressure surfaces are 40 mm thick, coated, continuous support plates - The pressing force of the pressure beams is continuously electronically controlled via 2 potentiometers and set via a frequency inverter, ensuring absolutely wear-free torque transmission. - Pressing force for horizontal pressure beam min. 500 daN (kg) up to continuously adjustable max. 2200 daN (kg) - Pressing force for vertical pressure beam min. 300 daN (kg) up to continuously adjustable max. 2200 daN (kg) - Includes option: Rapid traverse speed for quick positioning of the pressure beams, controlled via automatic workpiece detection with sensors in the pressure beams, pressing speed 5/10/25 mm/sec and rapid traverse speed 50 mm/sec. The sensors can be switched off for pressing special parts. - Jog mode for precise positioning of both pressure beams, e.g. for low pressing forces, drawers, and 45-degree carcasses. Simple operation via 6 separate push buttons, freely adjustable pressing time preselection with automatic opening, loading height 300 mm Machine is available for immediate delivery from our showroom. Location: Ex stock 54634 Bitburg Podpfey Egz Sex Abwjgn - Immediately available -

Kondisi: hampir baru (bekas), Tahun pembuatan: 2025, GANNOMAT "JUNIOR 323" FRAME DOWEL AND SLOT MORTISING MACHINE Complete in standard configuration according to price list 01/22/D with: - Precision collet chuck for ER 40 collets, diameter 3-26 mm. Incl. collets Ø 10 / 13 / 16 / 20 - Motor 1.5 kW, 2800 rpm - Positioning via digital counter - Pneumatic position adjustment for 2 levels (0-100 mm) - Max. drilling depth 150 mm - Precision indexing rail with 12 mm pitch featuring: - Center detent and 320 mm cross adjustment - 2 pneumatic safety clamping cylinders - Complete stop system consisting of: 1 center stop and 1 stop for oversize frames 1 stop rod approx. 850 mm long (can be mirrored from left to right) 2 flip stops - Lowerable slot mortising device with 2 program cams (400V, 3Ph, 50Hz, 1.5kW) Psdpfx Abexdttiswjgn Extraction funnel Ø 80 mm, tested for dust Central 45° mitre stop Pair of swiveling workpiece support arms (left and right) Drilling head mount 3-spindle drilling head, spacing 32 mm (can be rotated 90°) Chassis with 4 wheels for easy machine movement Available: Short notice - immediately -

Kondisi: sangat baik (bekas), Dijual pompa hidrolik berkualitas tinggi dari produsen terkemuka Rexroth Hydraulics (Bosch Rexroth) – produsen komponen hidrolik industri yang terkenal dan terpercaya. Pompa seri PGH (sistem Eckerle) – dikenal dengan operasi yang senyap dan kinerja tinggi, digunakan pada mesin industri, sistem hidrolik, dan otomasi. 📌 Spesifikasi: Produsen: Rexroth Hydraulics Model: PGH5-21/063RE11VU2 Tipe: pompa hidrolik gigi internal Sistem: Eckerle Kondisi: bekas, kondisi visual sangat baik ✔️ Kondisi teknis: Pedpfx Abeywpazswegn Pompa berputar dengan bebas, tanpa macet. Tidak dapat diuji di bawah tekanan. 📦 Aplikasi: mesin industri sistem hidrolik pres, lini produksi unit hidrolik