Beli Dalex A 3139-S 3 bekas (116.556)

Kondisi: sangat baik (bekas), Tang las titik yang didinginkan dengan air, dioperasikan dengan tekanan udara Merek: DALEX Tipe: A 3139-S3 Hjdexfrv Sepfx Agqjnk Daya nominal pada 50% ED: 8 kVA Arus hubung singkat sekunder: 9,5 kA Gaya elektroda: 300 daN Jarak antar lengan: 120 mm Panjang jangkauan lengan: 250 mm dengan mekanisme dua langkah – langkah panjang 52 mm – langkah pendek 27 mm Sambungan listrik: 400 V 50 Hz Pengaman: 16 A dipasang pada sistem penanganan portabel KAROSTAR bekerja tanpa beban – panjang dan tinggi dapat disesuaikan melalui sendi termasuk unit pendingin dan unit kontrol sinkron bawaan R15 Z dari operasi pelatihan kondisi sangat terawat Beragam lengan elektroda pendingin air tersedia

Kondisi: bekas, Spot welding tongs with DALEX RS 17 control and balancer Spot welding tongs DALEX Type A 3139 Serial No.: 98G 69757 Year of manufacture: 1998 Rated output at 50% duty cycle: 8 kVA Maximum welding power: 22.4 kVA Open-circuit voltage: 2.9 V Maximum electrode force: 200 daN Hnjdpfx Agjyxrhdsqsk Maximum short-circuit current: 9.5 kA Cooling water flow: 1.5 l/min Mains connection: 400 Volt, 50 Hz Throat depth: 250 mm Arm spacing: 120 mm Electrode holder diameter: 12 mm Spot electrode diameter: 6/12.5 mm Maximum electrode gap: 230 mm - Tongs with water cooling (without cooling unit) - cooling water requirement: 1.5 liters/min. - Suspension system: DALEX balancer, type D4-21 Weight of welding tongs: 15.5 kg Welding control DALEX RS 17 LS 5-phase synchronous welding controller with 2 welding programs PAS No.: 0413-410 Serial No.: 41341000278 Year of manufacture: 2006 Operating modes: Single (EP) / Series (SP) Squeeze time, hold time, open time, and pause time: each 1 – 99 cycles Welding time: 0.5 – 9.5; 10 – 99 cycles Welding current: 0 – 99 steps Pulses: 1 – 99 Current rise time: 0.5 – 9.5; 10 – 15 cycles Parameter setting via arrow keys - With solenoid valve control - Current adjustment via phase angle control - Welding controller mounted in sheet metal control cabinet for wall installation Total weight: approx. 30 kg In very good condition

Kondisi: sangat baik (bekas), kedalaman tenggorokan: 415 mm, Water-cooled, pneumatically operated spot welding tongs Make: DALEX Type: A 3139-S2 Rated power at 50% duty cycle: 8 kVA Secondary short-circuit current: 8 kA Secondary open-circuit voltage: 2.9 V Hjdpfx Agstdnqzsqsnk Electrode force: 300 daN Equipped with universal suspension and suspension bracket 10 m connection cable Synchronised welding control RS 15 1 pair of electrode arms, 415 mm throat depth – upper arm 245/55-1 K, lower arm V 20//415 S

Kondisi: baik (bekas), For sale: Dalex-Werke PMS11-3 spot welder, 172 kVA, in very good condition. Hsdeu Sb Dtjpfx Agqsnk

Kondisi: baik (bekas), High-performance spot welding machine in 3-phase DC version DALEX, model PMS 14-4 G3 Arm reach: 550 mm Rated power at 50% duty cycle: 240 kVA Secondary short-circuit current: 89.5 kA Secondary open-circuit voltage: 4.69 - 9.38 V Electrode force: 80–1200 daN Equipped with double-stroke cylinder and approach stroke Hnsdpfx Agegqxg Ajqek Lower arm support Weight: 1,660 kg Mounted control cabinet according to VDE 0100 Main switch 4-step selector switch Synchronised dual-circuit welding controller 8036 S3 Machine is being reconditioned

Kondisi: bekas, Tahun pembuatan: 1976, Technical details: Table surface: 1300 x 190 mm Speed range: 60 - 4000 rpm, stepless Quill feed, stepless: 0.06 / 0.12 / 0.24 mm/rev Vertical quill travel: 140 mm Spindle taper: SK 40 Spindle head swivels left and right: 90° and 45° Total power requirement: 3.0 kW Machine weight approx.: 1620 kg Machine dimensions (LxWxH): 2.7 x 2.3 x 2.4 m Milling machine with universal milling head Spindle rotation right/left Table specifications: X/Y/Z travel: 860/380/460 mm Feed X/Y/Z: 40 - 400 mm/min, stepless Rapid traverse: 400 mm/min Max. workpiece weight: 30 kg Equipment: 3-axis Mitutoyo digital readout with extension arm Machine lighting Coolant tank with pump Hsdpfeu Sq Emox Agqsnk Adjustable feed on X and Y axes Includes accessories as shown in the picture

Kondisi: belum diuji (bekas), Fungsionalitas: belum diuji, nomor mesin/kendaraan: 30547, kecepatan spindel (maks.): 160.000 rpm, lebar meja: 350 mm, panjang meja: 700 mm, berat keseluruhan: 3.000 kg, Tanpa harga minimum – penjualan dijamin kepada penawar tertinggi! Batas waktu pembayaran mesin adalah 20.11.2025! Penawaran mengikat untuk pengambilan tepat waktu antara 01.12.2025 dan 05.12.2025! RINCIAN TEKNIS Kecepatan putar spindle Turbin T10: 75 / 100.000 rpm Kecepatan putar spindle Turbin T16: 120.000 – 160.000 rpm Dimensi meja: ca. 700 x 350 mm RINCIAN MESIN Data listrik Tegangan kerja: 3 x 380 V Frekuensi: 50 Hz Hsdpfx Asxnl Imogqjnk Tegangan kontrol: 110 V Daya terpasang: 6 kW Dimensi & Berat Dimensi (P x L x T): 3.500 x 2.000 x 2.900 mm Berat: 3.000 kg PERLENGKAPAN 3 kepala penggerinda frekuensi tinggi berbeda (kecepatan berbeda) Indikator digital dua sumbu merek VISULESTA Dengan 4 alur

Kondisi: bekas, jarak tempuh: 1.001 km, jenis bahan bakar: diesel, warna: perak, kabin pengemudi: lain, tipe perpindahan gigi: lain, panjang ruang muatan: 5.100 mm, lebar ruang muat: 2.350 mm, tinggi ruang muatan: 900 mm,

Kondisi: bekas, Kontrol pengelasan tipe plug-in dalam housing 19" Tipe NPS 8043-1 IQ1 Hedpjdga Nbefx Agqenk dengan penjaminan kualitas dan 50 program Tegangan solenoid: 24 V DC termasuk lengkap dengan sabuk pengukur arus MB 260 MODUL KONTROL LAINNYA TERSEDIA DI GUDANG: Contoh: 8036 - 8036-S3 8033 8043 MPS 200 R1 RATIA 43a HWS 2202 Profil IQ

Kondisi: sangat baik (bekas), mesin las titik rocker arm berdiri, pendingin air Merek: DALEX Tipe: easyspot 35 Daya terukur pada 50% ED: 25 kVA Arus hubung singkat sekunder: 22,4 kA Tegangan tanpa beban sekunder: 5,1 V Gaya elektroda: 17-278 daN Jarak lengan: 140 atau 300 mm Kedalaman leher: 180-500 mm Hnjdpfxjyxp Rpo Agqsk Dengan panel kontrol tambahan sesuai VDE 0100 Kontrol pengelasan sinkron Sakelar utama

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2014, Fungsionalitas: berfungsi sepenuhnya, Perlengkapan: ekstraksi debu, Ini adalah sistem penghisap debu dengan sertifikat ledakan untuk debu rami. Sistem ini sudah terpasang dan harga sudah termasuk semua komponen. Hnsdpfxsxpm Auo Agqek

Kondisi: bekas, Manufacturer: Leomotor A/S Type: KC 218B159 - LM 2000 - 12630 Hnodpfxodc A Rns Agqjk

Kondisi: baik (bekas), Tahun pembuatan: 2001, fladder-300-gyro-leiras Hnsdpsw Uabpofx Agqok

Kondisi: sangat baik (bekas), Tahun pembuatan: 2015, Dijual burner gas merk WEISHAUPT WM-G20 (2600 kW) yang berfungsi dengan baik dan kondisinya sangat terawat, lengkap dengan gas ramp DUNGS DN65. WEISHAUPT WM-G20 (2600 kW) - Daya: 350-2600 kW - Tipe: ZM - Tahun pembuatan: 2015 - Pengiriman tersedia atas permintaan Hnodpoign Izjfx Agqok - Semua data teknis dapat dilihat pada gambar Penjualan diutamakan kepada dealer, pelaku usaha, atau untuk ekspor. Semua data tanpa jaminan, kesalahan dan penjualan di luar sistem dimungkinkan. Penjual tidak bertanggung jawab atas kesalahan pengetikan atau transmisi data.

Kondisi: sangat baik (bekas), Contact tips for single-sided accessible weld joints with counter-electrode and welding cable, 1600 mm length with switch for mode selection "CONTACT SPOT WELDING" or CONNECTION FOR DALEX SPOT WELDING TONGS, Series 31 with connection cable, main switch Hjdpfxjpudqmo Agqenk 16 A CEE connection plug

Kondisi: siap digunakan (bekas), Indramat KDA 3.2-100-3-A0S-W1 AV-penggerak spindle utama, SN:230902-731398-003, sepenuhnya direkondisi dan diuji secara profesional dengan garansi 12 bulan, 100% berfungsi, kelengkapan sesuai foto Hnjdpji Ebg Iofx Agqek

Kondisi: siap digunakan (bekas), Heidenhain Id. 324 952-11 papan antarmuka SN:8533139A, artikel telah direkondisi dan bergaransi 3 bulan, bekas, terdapat bekas pemakaian normal, 100% berfungsi, ruang lingkup pengiriman sesuai foto. Hnodpfxsx Dwrpo Agqek

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2026, S&F Drum Chipper Type ATH 220x530/3 Demonstration Machine / Trade Fair Machine / New Machine Robust construction for long service life Feed height: 200 mm Feed width: 500 mm Number of chipper blades: 2 units Number of counter blades: 1 unit Rotor diameter: 520 mm (solid steel rotor) Number of feed rollers: 3 units Throughput capacity: up to approx. 20 cubic meters per hour* Chip length: approx. 30 mm Chipper drive power: 45 kW or as agreed Feed roller drive power: 2 x 2.2 kW Hnsdow I R Rnopfx Agqjk Operating / control voltage: 400/220 V, 50 Hz Weight: 2,600 kg *Depending on chip length, main motor kW rating, blade count, and feed method S&F chippers and drum chippers with horizontal feed are used in various sectors of the wood processing industry (sawmills, timber plants). Chippers of the “ATH” series produce high-quality, homogeneous wood chips from wood residues with minimal fines, e.g., as premium chips for the cellulose industry or as fuel chips for energy generation. Advantages: - Maximum throughput - Low fines content - Low maintenance - Versatile application - Custom manufacturing available Need more information? Contact us! We are happy to advise you. Drum chipper | Wood chipper | Chipper | Chipping machine | Wood chipping machine | Shredder | Wood crusher

Kondisi: baru, Tahun pembuatan: 2026, Drum Chipper Series ATH-220/530/3 | ATH-220/730/3 | ATH-220/1060/3 S&F chipping machines and drum chippers with horizontal feed are used in various sectors of the wood processing industry (sawmills, timber works). Chippers of the "ATH" series produce high-quality and homogeneous wood chips with minimal fines content from wood residues, for example as premium wood chips for the pulp industry or as fuel chips for energy production. Series ATH-220/530/3 | ATH-220/730/3 | ATH-220/1060/3 - Infeed height: 200 mm - Infeed width: 500 | 700 | 1000 mm - Number of chipper knives: 2 – 4 pcs - Number of counter knives: 2 pcs - Rotor diameter: 520 mm - Number of infeed rollers: 3 pcs - Throughput capacity: up to approx. 40 solid m³/h * - Chip length: 5 – 50 mm - Chipper drive power: 22 – 110 kW - Feed roller drive power: 2 x 2.2 kW - Operating / control voltage: 400/220 V, 50 Hz - Weight: 2,800 – 4,000 kg Hnjdpfx Agswbv Ereqjk *Depending on chip length, main motor kW, number of knives, feed method Advantages: - Maximum throughput - Low fines content - Low maintenance - Versatile use - Custom manufacturing Do you need further information? Contact us! We will be happy to advise you. Drum chipper | Wood chipper | Chipper | Chipping machine | Wood chipping machine | Shredder | Wood shredder

Kondisi: sangat baik (bekas), Three-phase DC spot welding machine, Model A/DH Manufacturer: DALEX Type: PMS 14-5 G3 Throat depth: 550 mm Rated power at 50% duty cycle: 150 kVA Secondary short-circuit current: 65 kA Hnsdpfev Uwyrex Agqek Secondary open-circuit voltage: 3.35 - 6.7 V Electrode force: 80-1,200 daN Weight: 1,620 kg Equipped with double-stroke cylinder 4-step switch Main switch Mounted control cabinet according to VDE 0110 with 100-program welding controller MPS 8043/1

Kondisi: sangat baik (bekas), Mesin las titik dengan silinder stroke tunggal dan pemegang elektroda flensa atas dan bawah Merek: DALEX Tipe: PMS 14-3 Jarak pengelasan: 350 mm Daya nominal pada 50% ED: 80 kVA Arus hubung singkat sekunder: 54,5 kA Tegangan tanpa beban sekunder: 7-14 V Gaya elektroda: 80-1.200 daN dilengkapi dengan: Sakelar 8 langkah Sakelar utama Lemari kontrol tambahan HARMS+WENDE Kontrol pengelasan sinkron MPS 200 8 program pengelasan Plat tipe AEG Hjdpstuwz Iefx Agqonk Mulai dengan pedal kaki

Kondisi: sangat baik (bekas), Tang las titik berpendingin air, dioperasikan secara manual DALEX Tipe A 3119 dengan mekanik langkah ganda dan setopan langkah pendek Langkah pendek 25 mm - Langkah panjang 57 mm Hnsdpfx Ajg Ew H Njgqek dengan sakelar gaya elektroda dan konverter sekunder untuk kontrol arus Daya nominal pada 50% ED: 8 kVA Arus hubung singkat sekunder: 9,5 kA Gaya elektroda: 180 daN Jarak antar lengan: 120 mm Jangkauan lengan: 250 mm dengan kontrol pengelasan sinkron RS 11-2 Sakelar utama, kabel sambungan, dan steker CEE 16 A Stok lengkap lengan elektroda berpendingin air tersedia

Kondisi: bekas, jarak tempuh: 20 km, daya: 125 kW (169,95 hp), pendaftaran pertama: 01/2025, jenis bahan bakar: diesel, berat keseluruhan: 3.230 kg, warna: biru, tipe perpindahan gigi: mekanis, kelas emisi: Euro 6, jumlah tempat duduk: 4, panjang total: 5.370 mm, lebar total: 1.918 mm, tinggi total: 1.874 mm, panjang ruang muatan: 2.030 mm, lebar ruang muat: 1.840 mm, tinggi ruang muatan: 350 mm, Perlengkapan: ABS, filter jelaga, kunci sentral, pemanas parkir, pendingin udara, penggerak semua roda, program stabilitas elektronik (ESP), sistem navigasi,

Kondisi: bekas, jarak tempuh: 32 km, daya: 125 kW (169,95 hp), pendaftaran pertama: 04/2026, jenis bahan bakar: diesel, berat keseluruhan: 3.230 kg, warna: hitam, tipe perpindahan gigi: otomatis, jumlah tempat duduk: 4, panjang total: 5.580 mm, lebar total: 1.990 mm, tinggi total: 1.860 mm, panjang ruang muatan: 2.030 mm, lebar ruang muat: 1.840 mm, tinggi ruang muatan: 350 mm, Perlengkapan: ABS, filter jelaga, kunci sentral, pemanas parkir, pendingin udara, penggerak semua roda, program stabilitas elektronik (ESP), sistem navigasi,

Kondisi: sangat baik (bekas), Solo machine – Universal machine (first & second in a production line) Second DEP in the line X10023 Electronic control OMRON Separate control cabinet and operator console Protective and soundproof cabin No. 3+3 vertical support columns for working units As the second machine in the line, it accepts panels with a depth of 1900 mm Min. useful working width (mm): 300 Max. useful working width (mm): 2500 Min. useful working thickness (mm): approx. 6 Max. useful working thickness (mm): 60 Cam spacing (mm): 400 Adjustable feed speed (min/max) (m/min): 4–24 Total power Kw: 65 No. 3 working units (for each side of the machine): - No. 1 universal milling unit (electropneumatically controlled), shaft length 300 mm, belt-driven motor (9.2 kW at 3000 rpm) - No. 1 universal milling unit (electropneumatically controlled), shaft length 300 mm, belt-driven motor (9.2 kW at 3000 rpm) - No. 1 universal milling unit (electropneumatically controlled), shaft length 300 mm, belt-driven motor (9.2 kW at 3000 rpm) NOTE: These three vertical universal milling units are CNC controlled with horizontal and vertical adjustment. - Free space Hedpsyz Si Hofx Agqenk