Beli Dumeta D-Hbe-20 bekas (66.226)

Kondisi: baru, Table diameter: 1100 mm Table load capacity: 2000 kg Swivel range: 0 - 135 degrees Rotational speed: 0.1 - 1.0 rpm Height adjustment: 1100 - 1550 mm Torque at faceplate: 4000 Nm Motor power: 1.1 / 0.75 kW Welding current: 500 Amperes - Manual height adjustment. - Self-locking gearbox, therefore minimal overrun or backlash under eccentric load. Itedpsfv Ayvsfx Aidsl - Electronic components by Schneider, Siemens, and Delta. - Frequency-controlled, stepless rotation speed of the turntable. - High stability due to robust construction. - CE Certificate. The D-HBE series is supplied as standard with a cable remote control and a foot switch. Welding current transmission for up to 500 Amperes.

Kondisi: baru, Table diameter: 1100 mm Table load: 2 t Swivel range: 0 - 135 degrees Rotational speed: 0.1 - 1.0 rpm Torque: 4000 Nm Motor power: 1.1 / 0.75 kW Welding current: 500 amperes • Self-locking gearbox, preventing overrun or back-run under eccentric loading. • Electronic components by Schneider, Siemens, and Delta. • Frequency-controlled, stepless rotation speed of the turntable. • High stability due to robust construction. • Welding current transfer. • CE certificate. Iodpofv Ax Asfx Aidstl • Very good price/performance ratio. • The D-HBE series is supplied as standard with a cable remote control and a foot switch.

Kondisi: baru, Table diameter 800 mm Table load capacity 600 kg Tilting range 0 - 135 degrees Rotational speed 0.1 - 2.0 rpm Height adjustment 850 - 1300 mm Torque at faceplate 900 Nm Ijdpfx Aefv Aynsidstl Motor power 0.37 / 0.37 kW Welding current 500 Amps - Manual height adjustment. - Self-locking gearbox; minimal overrun in case of eccentric load. - Electronic components by Schneider, Siemens, and Delta. - Frequency-controlled, stepless rotation speed of the turntable. - High stability due to robust construction. - CE certificate. The D-HBE series is supplied as standard with a cable remote control and a footswitch. Welding current transmission for max. 500 Amps.

Kondisi: baru, en001 Itodpfxefv Ayrs Aidjl

Kondisi: baru, Table diameter 1300 mm Table load capacity 3000 kg Swivel range 0 - 130 degrees Rotational speed 0.05 - 0.5 rpm Height adjustment 1200 - 1800 mm Torque at the faceplate 6000 Nm Motor power 1.1 / 1.1 kW Welding current 700 amps - Manual height adjustability. - Self-locking gearbox minimizes both overrun and lag under eccentric loads. - Electronic components from Schneider, Siemens, and Delta. - Frequency-controlled, stepless turntable speed. Ijdjfv Ayyopfx Aidjtl - High stability due to robust construction. - CE certificate. The D-HBE series is supplied as standard with a cable remote control and a foot switch. Welding current transmission for up to 500 amps.

Kondisi: baru, Table diameter 2000 mm Table load capacity 10,000 kg Swivel range 0 - 130 degrees Rotation speed 0.02 - 0.2 rpm Height adjustment 1450 - 2200 mm Torque at faceplate 20,000 Nm Motor power 1.5 / 2.0 kW Welding current 1000 amperes - Manual height adjustment. - Self-locking gearbox, resulting in minimal overrun or backlash under eccentric loads. - Electronic components from Schneider, Siemens, and Delta. - Frequency-controlled, stepless rotation speed of the turntable. - High stability due to robust construction. - CE certificate. Iedpfxefv Ay Is Aidetl The D-HBE series is supplied as standard with a cable remote control and a foot switch.

Kondisi: baru, Table diameter: 1500 mm Table load capacity: 5000 kg Swivel range: 0 - 130 degrees Rotational speed: 0.05 - 0.5 rpm Height adjustment: 1300 - 2050 mm Torque at faceplate: 10,000 Nm Motor power: 1.5 / 1.5 kW Welding current: 1000 amperes Isdpfxofv Ay Ds Aidotl - Manual height adjustability. - Self-locking gearbox, preventing overrun or backlash even with eccentric loads. - Electronic components from Schneider, Siemens, and Delta. - Frequency-controlled, stepless rotation speed of the turntable. - High stability due to robust construction. - CE certificate. The D-HBE series is supplied in the standard version with a wired remote control and a foot switch.

Kondisi: baru, Load capacity 20 t Workpiece diameter 500 - 3800 mm Isdpfx Aofv A Dgsidstl Drum diameter 350 x 150 mm Feed rate 100 - 1000 mm/min Total power requirement 1.5 kW Machine weight approx. 1.8 t Dimensions LxWxH 2.2 x 2.7 x 0.9 m Features • Self-aligning for various diameters • Electronic quality components by Schneider/Siemens/Delta • Infinitely variable speed control of the drive unit • Polyurethane-coated rollers • Optimal load distribution (4 rollers/unit), especially gentle for thin-walled and sensitive workpieces • Cable remote control and double foot pedal • CE certificate • 3-year warranty (see warranty conditions)

Kondisi: baru, Load capacity 20 t Workpiece diameter 150 - 3800 mm Drum diameter 350 x 150 mm Feed rate 100 - 1000 mm/min Total power requirement 2 x 1.1 kW Features - Electronic components by Siemens/Schneider/Delta - Frequency-controlled drive unit speed - Running rollers: steel/rubber - High stability due to heavy-duty construction - CE certificate - Excellent price-performance ratio Itjdof Ep Dmjpfx Aidol - Cable remote control - Dual foot pedal - 3-year warranty (see warranty conditions)

Kondisi: baru, Load capacity 20 t Workpiece diameter 150 – 3800 mm Drum diameter 350 x 150 mm Feed rate 100 – 1000 mm/min Total connected load 2 x 1.1 kW Features • Electronic components by Siemens/Schneider/Delta • Frequency-controlled speed of the drive unit • Various running rollers available: steel/rubber/polyurethane • High stability due to robust construction • CE certificate • Excellent price-performance ratio • Cable remote control Itodpfx Ajfv A A Hjidsl • Dual foot pedal • 3-year warranty (see warranty terms)

Kondisi: baru, Capacity 20 t Workpiece diameter 500 - 3800 mm Drum diameter 350 x 150 mm Feed rate 100 - 1000 mm/min Total power requirement 1.5 kW Features • Self-aligning for multiple diameters • Electronic quality components from Schneider/Siemens/Delta • Infinitely variable speed adjustment of the drive unit • Support rollers made of robust rubber in steel casings • Optimal load distribution (4 rollers/unit), especially gentle for workpieces with thin walls and sensitive surfaces • High stability due to the machine’s heavy-duty construction • CE certificate • Excellent price-performance ratio • Remote control (on cable) and double foot pedal • 3-year warranty (see warranty conditions) Itodpfx Aisfv A D Ssdjl

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 1996, jam operasional: 11.233 h, kapasitas angkut: 2.000 kg, tinggi angkat: 5.500 mm, pengangkatan bebas: 1.800 mm, jenis bahan bakar: diesel, tipe tiang: triplex, tinggi konstruksi: 2.450 mm, jenis penggerak: Diesel, Forklift diesel Pusat beban: 500 Jenis tiang: Triplex Transmisi: Hidrostatik Kondisi: Siap digunakan dan berfungsi penuh Isdpfxjz Dc Duj Aidstl Kondisi teknis: baik Ban depan, jenis: Superelastik Ban belakang, jenis: Superelastik Deskripsi: Penggeser samping, Katup ke-3, lampu kerja belakang, lampu kerja depan, kabin setengah, LED.

Kondisi: bekas, Tahun pembuatan: 1998, Fungsionalitas: berfungsi sepenuhnya, kapasitas pendinginan: 3,3 kW (4,49 hp), tegangan masuk: 400 V, frekuensi input: 50 Hz, Pendingin Oli - Pendingin Oli Aliran D20V D30V 2 Pendingin Oli Aliran - Sistem pendingin untuk pendinginan mesin - Dapat dijual secara terpisah. Dua pendingin oli aliran/pendingin aliran independen dari Wöhr Kältetechnik untuk pendinginan oli/oli hidrolik untuk mendinginkan/mengatur suhu sirkuit pendingin atau sistem hidrolik pada mesin perkakas, dengan pompa sirkulasi terintegrasi, sensor aliran. Kotak kontrol terintegrasi di dalam badan dengan kabel penghubung, pengatur suhu LAE MTR11, dan kontak sinyal bebas potensial jika terjadi gangguan. Itsdpjg U H E Sefx Aidel Pompa sirkulasi terintegrasi adalah pompa roda gigi. Perangkat pendingin ini cocok untuk oli bersih. Panduan untuk memprogram pengatur suhu tersedia. Kedua pendingin dalam kondisi bekas. Unit pendingin. Pendingin Oli Aliran Wöhr Tipe D 20 V, Tahun pembuatan 1998, No. Seri 98101582, kapasitas pendinginan 2 kW, refrigeran R 404 a, dengan pompa sirkulasi terintegrasi, tegangan operasi 400V, 50Hz, pengatur LAE MTR11, dengan konektor Walter Procon (pendingin terpasang pada sistem hidrolik mesin gerinda), dimensi sekitar 80 x 75 x 110 cm, total konsumsi daya 1,7 kW Pendingin Oli Aliran D 30 V Pendingin Oli Aliran Wöhr Tipe D 30 V, tahun pembuatan 1998, No. Seri 98101583, kapasitas pendinginan 3,3 kW, refrigeran R 404 a, dengan pompa sirkulasi terintegrasi, tegangan operasi 400V, 50Hz, pengatur LAE MTR11, dengan konektor CEE (pendingin terpasang pada suplai oli gerinda mesin gerinda), dimensi sekitar 80 x 75 x 110 cm, total konsumsi daya 2 kW. Pendingin oli dan sistem pendingin oli dalam kondisi bekas dan terawat dengan baik. Harga: Dapat Dinegosiasikan Harga yang kami tawarkan per unit adalah € 1.950,-- (netto, belum termasuk biaya pengemasan, diambil di lokasi). Semua spesifikasi teknis dapat berubah sewaktu-waktu karena kesalahan ketik/kesalahan. Kami hanya menjual ke negara-negara anggota Komunitas Eropa.

Tahun pembuatan: 2000, Kondisi: siap digunakan (bekas), A complete bottle washing system is available, including a Klinger bottle washer, Hager + Elsässer drinking water treatment unit, and RO reverse osmosis system. Itsdetwqzlopfx Aidol 1) Klinger Euro Class-D 20/1/73 bottle washer, year of manufacture: 2000, capacity: 9,600 bottles/h, cycle time: 7.5 s, throughput time: 12.63 min, bottles per row: 20, number of rows: 107, max. bottles in machine: 2,020, water consumption: 3.8 m³/h, soft liquor/rinse liquor tank volume: 5,600 l/740 l. Dimensions (LxWxH): approx. 8,000 mm x 3,400 mm x 2,800 mm, weight: approx. 16,000 kg, control system: Siemens S7. 2) Hager + Elsässer drinking water treatment unit consisting of cation and anion exchangers, capacity: 5 m³/h. Includes salt tank, pre-filter, and UV probe. 3) RO reverse osmosis unit, full demineralization capacity: 2.5 m³/h. Documentation available. On-site inspection possible.

Kondisi: bekas, Tahun pembuatan: 2016, Pengaduk adonan spiral Diosna SP 120 D Kapasitas adonan: 120 kg Kapasitas tepung: 75 kg Pengatur waktu otomatis Dua pengatur waktu Dua tingkat kecepatan Pengadukan berlawanan arah Dapat dipindahkan dengan pengunci Iedpfoz A Sb Hsx Aidjtl

Kondisi: bekas, Tahun pembuatan: 2010, Pengaduk adonan spiral Diosna SP 120 D Kapasitas adonan: 120 kg Kapasitas tepung: 75 kg Pengatur waktu otomatis Dua pengatur waktu Dua tingkat kecepatan Pengadukan berlawanan arah Dapat dipindahkan dengan pengunci Itodjz A Sknspfx Aidol

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1993, Fungsionalitas: berfungsi sepenuhnya, Emcomat Emco EM20D mesin bubut poros utama & ulir, tahun pembuatan 1993 Tahun pembuatan: 1993 Ketinggian senter: 200 mm Panjang pembubutan: 1000 mm Mesin dalam kondisi berfungsi. Jika berminat, kami juga dengan senang hati memberikan informasi terkait mesin lain yang tersedia di tempat kami. Iedpfx Aozivhmoidetl Anda dipersilakan untuk mengunjungi mesin ini di tempat kami dengan perjanjian terlebih dahulu.

Kondisi: baru, Thread diameter M3 - M16 mm Continuously variable speed up to 187 rpm Working range 180 - 2000 mm Motor power 0.7 kW Electric tapping machines for threads M3 - M16, Adjustable angle. 9 quick-change chucks with slip clutch. Settings via display: Itjdpfx Asfg U Sqoidol Variable speed, adjustable depth, material selection, selection of main rotation direction, thread selection. Optional: Clamping table with T-slots: 990x700x800 mm. Magnetic base. Also available for: M14 to M24 and M27 to M33.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1997, Max. workpiece length: 3600 mm, max. workpiece width: 1400 mm, length: 8750 mm, width: 5250 mm. Itsdpfx Ajqvnl Tjidsl

Kondisi: baik (bekas), Tahun pembuatan: 2013, nomor mesin/kendaraan: 011-113081603, 23370 Technical Specifications: - Max. load capacity: 50 kg - Face plate diameter: 340 mm Iodpoq Ev R Sofx Aidetl - Spindle bore: 25 mm - Face plate swivels via handwheel: 0 – 90° - Variable electric rotary speed: 0.5 – 3 rpm - Clockwise and counterclockwise rotation - Incl. foot switch - Ground cable - Welding current transmission: approx. 350 A - Power supply: 230 V - Table height in horizontal position: 760 mm - Required space: approx. W 650 x H 760 x D 600 mm - Weight: approx. 150 kg

Kondisi: diremaj di bengkel (bekas), Mesin Bubut dengan Spindel Panduan dan Spindel Penarik Kern Tipe/Model: D 20 A Kondisi: Direkondisi Data Teknis Tinggi antar pusat: 215 mm Jarak antar pusat: 600 mm Diameter lubang spindel: 50 mm Lebar alas: 300 mm Kecepatan putaran (24): 31,5 - 1400 rpm Daya motor: 4 kW Langkah pin: 150 mm Berat: sekitar 1500 kg Dimensi (P x L x T): sekitar 2180 x 1180 x 1560 mm Peralatan: - Protokol geometri - Tampilan digital 3 sumbu - Tombol berhenti darurat - Sistem dudukan pengganti cepat Multifix - Lampu mesin Itsdpey H Eckofx Aidol - Sistem pendingin - Ujung pahat yang berputar bersama

Kondisi: sangat baik (bekas), Tahun pembuatan: 2018,

Kondisi: baru, Thread diameter 12 mm Infinitely variable speed 375 rpm Working range 180 - 2000 mm Motor power 0.7 kW Iodpfxjd Iinno Aidetl Weight 28 kg Electric tapping machines for M3 - M12 threads, angle adjustable. With a working range of 180 - 2000 mm. 7 pcs. quick-change chucks with slip clutch. Adjustable via display: Variable speed, adjustable depth, material selection, choice of main rotation direction, thread selection.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2013, nomor mesin/kendaraan: 1044, Diosna SP 120 D spiral kneading machine/mixer, 32 A connection with 2 o’clock (clockwise rotation), 2 speeds, on castors. Excellent condition, operates silently. For further questions, please contact us. Thank you in advance. Iodpsdc Eh Aefx Aidstl

Kondisi: baik (bekas), Tahun pembuatan: 2004, Fungsionalitas: berfungsi sepenuhnya, Kami menawarkan mesin penimbang multi-kepala, Delta Pack MKW: HDW10 3,5, yang kondisinya masih baik, beserta mesin pengemas kantong, model DE420 FU. Mesin ini diproduksi pada tahun 2004. Produsen: Multi Weigh, Delta Pack Ijdpfozlnbwex Aidetl Model: MKW: HDW10 3,5, Kantong: DE420 FU Tahun Pembuatan: 2004 Kondisi: baik ID Kategori: 703 Tipe: Mesin penimbang multi-kepala dengan mesin pengemas kantong Jika Anda memiliki pertanyaan atau membutuhkan informasi lebih lanjut, jangan ragu untuk mengirimkan pesan atau menghubungi kami.