Beli Ekstruder Sekrup Tunggal Ed-N45-25D, Tahun Pembuatan 1993 bekas (16.813)

Tahun pembuatan: 1993, jam operasional: 281 h, Kondisi: bekas, Fungsionalitas: belum diuji, Extrudex ekstruder sekrup tunggal ED-N45-25D, tahun 1993, kondisi bekas (diremajakan total tahun 2014) Tipe: ED-N-45-25D Pgjdpoxw Tumjfx Anwjl Tegangan nominal: 3x400V 50Hz Tegangan kontrol: 230V 50Hz / 24VDC Sekring maksimum: 200A Motor penggerak tahun: 2004 tipe: EFG EF132 M Opsional termasuk: - Haul-off belt - Meja kalibrasi Untuk informasi lebih lanjut silakan hubungi kami. Harga atas permintaan.

Kondisi: baik (bekas), Tahun pembuatan: 2001, Manufacturer: IDE Model: 45/4 Year of manufacture: 2001 Single screw extruder Ø45mm, 25 L/D Analog control panel on right side Screw profile: PVC 4 heating zones on barrel 4 heating zones on tooling Motor power: 8.5 kW Throughput: up to 60 kg/h Podpfeuhpiyox Anwegl Good overall condition, very clean machine.

Kondisi: sangat baik (bekas), Tahun pembuatan: 1993, Fungsionalitas: berfungsi sepenuhnya, Mesin pelapis tepi KTD51 untuk profil dan tepi lurus, dengan aplikasi lem langsung. Panjang benda kerja minimal 160 mm, tebal benda kerja 10–40 mm, tebal tepi 0,5–1 mm, radius dalam sekitar 25 mm. Tahun pembuatan 1993, kecepatan makan dapat diatur 4–9 m/menit, 2,6 kW, 400 Volt. Transportasi tersedia dengan biaya tambahan! Pgedjvf H I Topfx Anwsl Karena usia mesin bekas, penjualan kepada pelanggan komersial dilakukan tanpa garansi.

Tahun pembuatan: 2018, Kondisi: diremajakan ulang (bekas), Fungsionalitas: berfungsi sepenuhnya, Extrudex Extruder Sekrup Tunggal Data Teknis: Output: 300-500 kg/jam, tergantung bahan input Tahun Pembuatan: 1995, tetapi direkondisi total pada tahun 2018 dan sejak itu kondisinya seperti baru Komponen Instalasi: Extruder Sistem kontrol lengkap Sistem pergantian saringan “Kreyenborg” K-SWE 150 Bak air Kepala strand Ayakan getar (klasifikator) Perangkat periferal kecil Untuk tambahan €3000 tersedia strand granulator. Pedpfxsyrn Rto Anwsgl

Kondisi: diremaj di bengkel (bekas), Stock No. 2553 1 used, partially overhauled and function-tested extruder, consisting of: Material hopper Single-screw extruder BATTENFELD type UNI-EX 1-75-25 B Screw Ø 75 mm – 25 L/D, barrel air-cooled Screw speed up to 130 rpm Drive 120 kW – DC (overhauled), belt-driven Heating zones – control sections for downstream equipment Control cabinet, melt pressure sensor Inspection/test run available at short notice by arrangement at our Wuppertal facility. Podjiyyndepfx Anwogl Matching accessories available: > Screen changer > Pelletizing (strand, hot face or water ring) > Miscellaneous Further extruders and complete lines are available for demonstration ex works Wuppertal. We look forward to your enquiry or visit.

Kondisi: diremaj di bengkel (bekas), Stock no. 2553 1 used, partially overhauled, and function-tested extruder, consisting of: - Material hopper - Single-screw extruder BATTENFELD type UNI-EX 1-75-25 B - Screw diameter: 75 mm – 25 L/D, cylinder air-cooled - Screw speed up to 130 rpm - Drive 120 kW – DC (overhauled), drive via belt pulley - Heating zone control sections for downstream equipment - Control cabinet, melt pressure sensor Pgsdpsiyynwsfx Anwel Inspection / test run can be arranged at short notice at our facility in Wuppertal. Suitable accessories available: > Screen changer > Pelletizing (strand, hot-cut, or water ring) > Miscellaneous More extruders and complete lines available for demonstration ex works Wuppertal. We look forward to your inquiry or visit.

Tahun pembuatan: 2006, Kondisi: sangat baik (bekas), Used twin-screw extruder Plama No.: DE27676 Manufacturer: Leistritz Model: ZSE 130 GL Year of manufacture: 2006 Screw diameter: 2 x 130 mm Length L/D ratio: 35 D Drive motor: 500 kW Material: PE, PP, PS, ABS + fillers Output: 1000 - 2000 kg (depending on material) Control system: Currently without control cabinet, but available separately on request Details: Co-rotating, degassing, segmented screws and barrels Options: Screen changer, dosing unit, pelletizing, control cabinet This offer does not meet your requirements? Please visit our website: "Plama Engineering" or send us your detailed inquiry – we offer suitable solutions for almost every budget. Pedpfeqqh Unox Anwsgl

Tahun pembuatan: 2013, Kondisi: baik (bekas), Merek: Krauss Maffei Technologies GmbH Model: KME 38-30 Tipe sekrup: Sekrup tunggal Tahun pembuatan: 2013 Diameter sekrup: 38 mm Rasio L/D: 30 Psdpfx Anjyxn U Towegl

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, brabender-30mm-extruder-sale Pedpoyi Am Refx Anwogl

Tahun pembuatan: 1999, jam operasional: 16.484 h, Kondisi: baik (bekas), Merek: Collin Lab & Pilot Solutions GmbH Pgodpfxeyub Rle Anwjl Model ekstruder: E 30 M Low Boy Tipe sekrup: Sekrup tunggal Diameter sekrup: 30 mm Rasio L/D: 25 mm Jam kerja: 16.484 jam

Tahun pembuatan: 2000, Kondisi: siap digunakan (bekas), SINGLE-SCREW EXTRUDER GRAEWE-FANGLI 60X33 Application: PE PIPES or PP PIPES Type: 60 X 33 Year of manufacture: 2000 Screw diameter: 60 mm Pgsdpfx Aoifgwhonwol Drive: 75 kW Output capacity PE: approx. 200 - 250 kg/h Condition: Good, operational The extruder is my property. Sachal Extrusionmachines Bahnhofstrasse 6 D-26345 Bockhorn/Grabstede Germany

Tahun pembuatan: 2011, Kondisi: sangat baik (bekas), SINGLE-SCREW EXTRUDER GRAEWE-FANGLI 90X33 Application: PE PIPES or PP PIPES Type: SJ 90 X 33 A6 Year of manufacture: 2011 Screw diameter: 90 mm Drive: 160 kW Pgedpfeifgwlex Anwsl Output capacity PE: approx. 400 - 450 kg/h Condition: Very good, ready for operation The extruder is my property Sachal Extrusionmachines Bahnhofstrasse 6 D-26345 Bockhorn/Grabstede Germany

Tahun pembuatan: 1999, Kondisi: siap digunakan (bekas), AMUT EA90/24 SINGLE-SCREW EXTRUDER Type: RALDI Screw for PVC, oil-cooled Application: PVC, PE, or PP Year of manufacture: 1999 Operating hours: 48,000 Drive: DC 36.3 kW 11 digital temperature controllers Melt pressure and melt temperature display SIEMENS SIMATIC DISPLAY Operating hours: 48,119 h Pull-off control possible via the extruder Pjdpfxsk Nn Dzj Anwogl Condition: Good, ready for operation The extruder is my property Sachal Extrusion Machines D-26345 Bockhorn-Grabstede Bahnhofstraße 6 Germany

Tahun pembuatan: 2024, Kondisi: seperti baru (mesin pameran), Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 04344, FABBRICAMENTE NUOVO Leistritz Serie ZSE Maxx (27 / 40 / 50) – 48 L/D – 0 Ore – Avvolto in fabbrica! Specifiche tecniche Produttore: Leistritz Extrusionstechnik GmbH Modelli disponibili: ZSE 50 Maxx ZSE 40 Maxx ZSE 27 Maxx Anno di costruzione: 2024 Condizioni: 100% nuovo di fabbrica (Zero ore di funzionamento, totalmente inutilizzato, ancora nell’imballo/origine fabbrica) Rapporto L/D: 48 L/D (Tutte le unità aggiornate direttamente da Leistritz con nuovi set completi di cilindri e nuovi alberi) Tutte le macchine sono dotate di alimentatori laterali. Descrizione Disponibili per vendita immediata singolarmente o in lotto: Tre (3) estrusori bivite Leistritz ZSE Maxx 2024 impeccabili (modelli: ZSE 50 Maxx, ZSE 40 Maxx e ZSE 27 Maxx). Queste unità erano originariamente macchine da laboratorio di proprietà Leistritz. Per soddisfare requisiti produttivi di alto livello, Leistritz ha effettuato direttamente l’upgrade di tutte e tre le unità portandole a un rapporto L/D di 48. Gli upgrade OEM includono nuovi set completi di cilindri e nuovi alberi montati direttamente in fabbrica. Tutte le unità sono in condizioni perfette, completamente nuove, con zero (0) ore di funzionamento. Sono ancora sigillate e imballate nelle casse originali dalla fabbrica: non sono mai state aperte, toccate o messe in servizio dal loro arrivo da Leistritz. Ciascuna macchina viene proposta come sistema completo chiavi in mano, fornita con sistema di alimentazione dedicato, architettura di controllo e un’ampia dotazione di attrezzature e ricambi originali. Fornitura e accessori inclusi (per ogni macchina) Sistema di alimentazione ed estrusione Alimentatore volumetrico e alimentatore laterale (con apposito carrello per alimentatore laterale) Bocche di carico Accessori downstream e testa filiera Testa filiera strand, piastre forate, portafiltri Controllo e sistema elettrico Quadro di comando completo (con macrometro integrato nel pannello operatore) Set completo di cavi di collegamento e cavi per azionamento principale Kit ricambi completo per quadro elettrico Sistema di vuoto e degasaggio Set supplementare di pompe per vuoto, tubazioni per vuoto e manometri Sistemi di riscaldamento/raffreddamento per pompe vuoto e relativi collegamenti Sensoristica, manutenzione e installazione Sensori di temperatura e pressione fusione Dispositivo per montaggio coclee, estrattori e spazzole di pulizia Barre di sollevamento, elementi di livellamento, inibitori di corrosione Riepilogo per acquirenti Psdey Ufk Rspfx Anwsgl Modelli disponibili: ZSE 27 Maxx, ZSE 40 Maxx, ZSE 50 Maxx. Pronta consegna: nessuna attesa per tempi di produzione – disponibili subito. Garanzia OEM: tutti gli aggiornamenti e le estensioni a 48 L/D effettuati ufficialmente da Leistritz. Prezzi disponibili per singola macchina o per il pacchetto completo da tre unità. Foto degli imballi originali e della documentazione su richiesta.

Tahun pembuatan: 2022, Kondisi: baik (bekas), Manufacturer: Clextral Model: Evolum EV032 M Year: 2022 Condition: Used Serial number: B145 Stock number: 3385 Clextral extruder Type: Evolum EV032 M Extruder: 40D Barrel length: 10 x 128 mm Stroke length: 1420 mm Water: 4.5 - 5.5 Bar Air pressure: 6 Bar Steam injection: 2 - 6 bar Power supply: 3 x 400V, 50Hz, 83kW Dimensions: 4475 x 1200 x 2100 mm Weight: 1,905 kg Only 80 operating hours! Clextral water pump Type: CLX DKM Flow rate: 6 - 42 l/h Pressure: max. 10 bar Reservoir: 7.5 litres Power: 0.55 kW Dimensions: 1265 x 350 x 700 mm Clextral / Prominent oil pump Type: GMXA1604 Flow rate: 0.3 - 2.5 l/h Pressure: max. 10 bar Reservoir: 10 litres Dimensions: 900 x 700 x 1150 mm Clextral High Moisture Extrusion Cooking die HMEC type: 2 x 800 mm length Material: CLX202 Internal section: 60 x 8 mm Dimensions: 1900 x 700 x 1200 mm TLV steam set Type: 2/10 TLV SV148 Steam flow: 2 - 10 kg/h Steam pressure: 6 - 10 bar Max pressure: 10 Bar Steam inlet: DN15, PN16 Steam outlet: DN15, PN16 Air pressure: 6 - 10 bar Dimensions: 700 x 1600 x 2200 mm Weight: 150 kg 2 pcs. Tooltemp temperature controller Type: TT1398-3 Serial number: 321-5642-1 / 2 Year of manufacture: 2021 Power: 3 x 400V, 50Hz, 7.9kW Dimensions: 750 x 300 x 760 mm Weight: 70 kg WAM Group ploughshare mixer Type: WBH20008C023 Serial number: 17WB220000121 Year of manufacture: 2022 Mixer volume: 75 litres Dimensions: 1200 x 1600 x 1650 mm Weight: 500 kg Immequip screw conveyor Type: ELV 70/80-R Hopper: 150 litres Discharge: Ø 100 mm Power: 3 x 400V, 50Hz, 0.55kW Dimensions: 3100 x 1350 x 2600 mm Brabender dosing system Type: DDW-M-DDSR20 Serial number: 2200836.0636 Year of construction: 2022 Feed rate: 11 - 26 kg/h MTA France chiller Type: TAEevo TECH 081 Serial number: 2200377928 Year of construction: 2021 Refrigerant: R410A Cooling capacity: 20.6 kW Power: 3 x 400V, 50Hz, 14.2kW Podpfx Aozab Stonwegl Dimensions: 1950 x 800 x 1500 mm Weight: 340 kg

Kondisi: bekas, Tahun pembuatan: 2003, nomor mesin/kendaraan: IntNr230445, used CNC Swiss-type automatic lathe Citizen L520-VII, year 2003 Control: Cincom Mitsubishi Meldas 7 axes (X1/Z1/Y1/C1/X2/Z2/C2) Bar diameter max. 20 mm Turning length max. 205 mm Main spindle, max. speed 10,000 rpm, C-axis 0.001° Counter spindle, max. speed 10,000 rpm, C-axis 0.001° Tool holder for up to 18 tools (linear tool holders, front attachment, rear machining) Parts conveyor belt Fire suppression system Chip conveyor Pgedpfjy U Hlcjx Anwsl Bar feeder magazine IEMCA BOSS 432r The machine can be inspected under power by appointment. Technical specifications and details subject to change and prior sale!

Tahun pembuatan: 2017, jam operasional: 14.932 h, Kondisi: bekas, nomor mesin/kendaraan: IntNr231417, Technische Beschreibung – PERO RO Hersteller: PERO AG Modell: RO R1 / 414-EX Baujahr: 2017 / 10 Pedpfxoy U Hkxs Anwjgl Maschinentyp: Reinigungsanlage / Entfettungsanlage Verfahren: Lösemittelreinigung (z. B. modifizierte Alkohole oder Kohlenwasserstoffe) Technische Daten (typisch für diese Baureihe): Reinigungssystem: Geschlossener Kreislauf, vollautomatisch Arbeitskammergröße: ca. 530 × 320 × 200 mm Max. Chargengewicht: ca. 50 – 80 kg Lösemittel: Modifizierter Alkohol (kohlenwasserstoffbasiert) Trocknung: Vakuumtrocknung Steuerung: SPS-Steuerung mit Touch-Panel Ausstattung: Integrierte Destillationseinheit, Filtersystem, Ölabtrennung Leistungsaufnahme: ca. 10 – 15 kW Vakuumpumpe: Integriert Zustand: Sehr guter, gepflegter Zustand – aus laufender Produktion Besonderheiten: Energiesparendes Reinigungssystem mit geschlossenem Lösemittelkreislauf Hohe Reinigungsqualität bei minimalem Lösemittelverbrauch Ideal für feinmechanische und zerspanende Betriebe Die Maschine kann nach Terminvereinbarung unter Strom besichtigt werden. Änderungen und Irrtümer bei den technischen Daten und Angaben sowie Zwischenverkauf vorbehalten!

Kondisi: bekas, Tahun pembuatan: 2012, jam operasional: 20.000 h, nomor mesin/kendaraan: IntNr231536, High-end CNC turning centre with 2 turrets, 2 Y-axes, and IRCO bar feeder Control: SIEMENS 840D SolutionLine with ShopTurn interface Year of manufacture: 2012 Spindle hours: 20,000 Max. turning diameter: approx. 390 mm Max. turning length: 1,250 mm Bar capacity: 76 mm (standard) X-axis travel: 300 mm Z-axis travel: 1,250 mm Y-axis travel: +/- 60 mm (both turrets) Spindle specifications: Speed: up to 5,000 rpm Drive power: 34 kW (40% duty cycle) Torque: up to 380 Nm 4-axis kinematics 2 x 12 stations (all stations suitable for driven tools) Speed up to 6,000 rpm, power 11.3 kW Pjdpfxjy U Hkfo Anwsgl Gear cutting software, including specialised tool holders for gear hobbing/cutting. IRCO MUK short bar loader Hinged belt chip conveyor 20 bar high-pressure coolant system with paper belt filter Subject to prior sale and technical modifications or errors!

Kondisi: bekas, Tahun pembuatan: 2000, jam operasional: 42.000 h, nomor mesin/kendaraan: IntNr231370, STAR SA 16-12 CNC sliding head lathe, built in 2000 FANUC 18i-T CNC control Operating hours: 42,000 Technical data - Number of axes: 5 - Number of spindles: 2 MAIN SPINDLE - Max. bar diameter: 12 mm - Z-axis travel: 140 mm - Spindle speed: 8,000 rpm - Spindle drive power: 2.2 kW - Number of tool positions: 13 COUNTER SPINDLE - Max. bar diameter: 10 mm - Spindle speed: 8,000 rpm - Number of tool positions: 4 FMB Minimag bar feeder Pjdsy U Hinjpfx Anwsgl The machine can be inspected under power by prior arrangement. Technical data and information subject to change, error, and prior sale.

Kondisi: bekas, Tahun pembuatan: 2012, nomor mesin/kendaraan: IntNr231474, fr Podey U Hhqjpfx Anwjgl

Kondisi: hampir baru (bekas), Tahun pembuatan: 2015, nomor mesin/kendaraan: IntNr231595, WICKI CG12GE – Centerless Grinding Machine Year of manufacture: 05/2015 The WICKI CG12GE is a high-precision centerless grinding machine engineered for efficient serial production of round components with small to medium diameters. This machine operates without workpiece clamping between centers. The workpiece is continuously guided between the grinding wheel, regulating wheel, and support blade, achieving exceptional dimensional accuracy and surface finish while maintaining high productivity. Grinding Methods - Through-feed grinding for continuous series production - In-feed (plunge) grinding for short precision parts and shoulders Technical Data (approx.) - Grinding range: Ø 1 – 30 mm - Maximum workpiece length: up to approx. 140 mm (depending on the process) - Grinding wheel: Ø 305 × 150 × 127 mm - Regulating wheel: Ø 205 × 150 × 90 mm - Grinding wheel speed: approx. 1,900 rpm - Grinding speed: approx. 30 m/s - Grinding wheel motor power: approx. 5.5 kW - Regulating wheel motor power: approx. 1.3 kW - Total connected load: approx. 10 kW / 400 V Features & Advantages - Exceptional roundness and dimensional accuracy - Ideal for batch and mass production - Short cycle times due to continuous material flow Psdey U Hgtopfx Anwogl - Robust industrial design for 24/7 operation - Minimal setup and operator effort required - Excellent surface finish quality Application Areas - Automotive supply industry - Hydraulic and pneumatic components - Precision shafts, pins, and bolts - Mechanical engineering and mass production - Metalworking and job-order production Gross weight: approx. 1,750 kg Dimensions (L×W×H): approx. 2,250 × 1,100 × 1,700 mm Machine Status: The machine has been disassembled by the seller to facilitate rapid reassembly and recommissioning as a spare or backup machine if needed. It is fully functional. The machine can be inspected by appointment. Subject to prior sale and change; errors in technical data and information excepted.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2021, EMCOMAT_14_D Podpfjy Tichjx Anwogl

Tahun pembuatan: 1994, jam operasional: 32.303 h, Kondisi: diremaj di bengkel (bekas), Fungsionalitas: berfungsi sepenuhnya, Conical Twin-Screw Extruder Manufacturer: Reifenhäuser Model: BT 1000-2-63 K Year of manufacture: 1994 Machine No.: 32061 Operating hours: 32,303 hrs Pgodpfjyhcghox Anwjl Screw geometry: conical, for rigid PVC profiles Screw diameter: 63 – 121 mm Screw length: 1300 mm Screw rotation speed: max. approx. 32 rpm Nominal gearbox torque: 1000 daNm Dynamic load rating of thrust bearing: 103,600 daN Motor power: 43.0 kW Drive motor: Baumüller DC motor Barrel heating/cooling zones: 4/3 (air-cooled with fan) Adapter heating zones: 1 Die heating zones: 5 Temperature control: digital temperature controllers (2 x PSG Multipact 88) Max. permissible melt pressure: 500 bar Output capacity: approx. 150 - 200 kg/h for rigid PVC profiles Accessories: Dosing unit and material hopper Extrusion height: 1150 mm Dimensions: 4250 x 1200 x 1750 mm (LxWxH) without hopper Weight: approx. 3000 kg Condition: The machine comes directly from production and has been cleaned, repainted (RAL 7035, light grey) and function-tested by us. The barrel and screw pair are in good condition.

Kondisi: baik (bekas), Dumper beroda rantai bekas, kondisi sangat baik, sedikit pemakaian. Mesin sudah diperiksa menyeluruh dan dibongkar di bengkel mekanisasi serta telah mendapat perawatan rutin. Dumper dilengkapi rantai baru dan mesin yang usianya baru 1 tahun. Total terdapat 3500 jam kontak di meteran (jam saat mesin aktif, bukan jam operasi mesin). Panjang transportasi 1,92 m, lebar 75 cm, tinggi 1,89 m. Berat sendiri 640 kg. Harga €6000 dengan faktur margin. Tukar tambah & pengiriman dimungkinkan. Pjdpfoy Uwg Djx Anwogl

Kondisi: siap digunakan (bekas), Fungsionalitas: berfungsi sepenuhnya, saspi-gv4-30 Pjdpfow Uhrijx Anwegl