Beli Emmers Perekatan bekas (256)

Kondisi: baik (bekas), Press lem hidrolik untuk kayu solid, seperti bahan bingkai jendela dan pintu, papan kayu solid, dll. Panjang kerja: 5 m. Tinggi kerja: 1,53 m. Kedalaman kerja: 0,10 m. Unit hidrolik: 2,2 kW. 10 silinder tekan hidrolik. 5 penjepit bawah pneumatik. Tekanan tekan maksimal: 150 kg/cm². Unit hidrolik: 2,2 kW. Nwedpoxiu Dgjfx Aa Ueg

Kondisi: bekas, Tahun pembuatan: 2011, Perfect binding line Kolbus KM 600 Year of manufacture: 2011 Comprising: Gathering Machine Kolbus ZU 804 Description: - Manual feed station - Number of gathering stations: 20 - Optical signature detection: Sygna-Lynx - Air Center: Becker - Setup unit - Delivery for incomplete products Perfect Binder Kolbus KM 600 Production counter: approx. 12,800,000 Description: - Semi-automatic adjustment - Co-Pilot with touchscreen - Number of clamps: 21 - Main milling station - 1st spine preparation station - 2nd spine preparation station - Brushing station - Excluding dust extraction, the machine was linked to a central extraction system - Drive station for spine gluing unit - Hotmelt spine gluing unit, interchangeable Nwodpfx Asy Uvfrea Ueg - Premelter for spine gluing unit: LH 375 - Drive station for side gluing unit - Hotmelt side gluing unit, interchangeable - Cover feeder: RA 49.A - 1st pressing station - 2nd pressing station - Laying down device (to the left) Conveyor Section Kolbus - Conveyor system, length (approx.): 20 m - Emergency delivery Three-Knife Trimmer Kolbus HD 143.P Year of manufacture: 2011 Production counter: approx. 12,570,000 Description: - Co-Pilot with touchscreen - Infeed belt from the right - Automatic magazine for inline production - Cut counter - Product counter - Knife presetting unit - Number of knife sets in total: 2 - Interchangeable cutting cassettes (standard set) The pictures also show a side stitching unit, which is mainly used for the production of schoolbooks for the Middle Eastern market. This unit is not included in the offer price but can be offered separately at an additional cost upon request.

Kondisi: bekas, Tahun pembuatan: 2007, Perfect Binder Line Wohlenberg City E-6000 (Edition 6000) Year of Manufacture: 2007 Consisting of: Book Block Feeder Solema Fastbook Gathering Machine Wohlenberg Sprinter E Description: - Manual feed station - Number of gathering stations: 16 - Optical signature recognition: WST - Opticontrol OSC 1-1 - Winjector vacuum system - Stack delivery unit - Criss cross delivery - Transfer to binder Perfect Binder Wohlenberg City E-6000 (Edition 6000) Description: - TFT touchscreen - Number of clamps: 15 - Milling and roughening station - Exclusive dust extraction, machine was connected to central dust extraction system Front Trimmer: VSS - Hotmelt spine gluing with integrated pre-melter - Hotmelt side gluing with integrated pre-melter - PUR spine gluing unit - Rotary cover feeder - Scoring station - First pressing station - Second pressing station - Delivery unit (to the left) Conveyor Line Description: - Transport system, length (approx.): 50 mtr Nwodpfx Aey Tvyyea Usg - Emergency collection Three-Knife Trimmer Müller Martini Merit S Year of Manufacture: 1997 Description: - Infeed from the right - Automatic magazine for inline production - Total number of knife sets: 2 - Interchangeable cutting cassettes (standard set): 4-17 Book Stacker Rima RS-3310S Year of Manufacture: 2007 - Delivery to the right

Kondisi: baik (bekas), Sumbel Herold 500 Mesin Lem Mesin ini seperti baru, berfungsi penuh dan siap untuk produksi. Ini adalah merek paling terkemuka di antara mesin laminasi kecil. Ideal untuk produksi sampul, kemasan dekoratif, dan lainnya. Made in Germany. Mesin bekerja dengan lem panas. Dilengkapi pelat pemanas dan bak air bawaan. Rol kuningan. Njdpfsy Rdzaox Aa Uewg Pengaturan tanpa batas: ketebalan lem, lebar celah, dan kecepatan. Lebar kerja: 500mm Catu daya: 380V Berat: 60kg

Tahun pembuatan: 2025, Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, Columbus Vacuflex Vacuum Bag – available immediately! (Professional vacuum bag for a wide range of applications in vacuum technology) The COLUMBUS Vacuflex is a robust and versatile vacuum bag designed for applications such as vacuum form bonding, veneering, coating, and laminating workpieces made of wood and wood-based materials. Thanks to its flexible construction, the vacuum bag is particularly suitable for workpieces that are too large or geometrically complex to be processed with conventional vacuum presses. The fabric-reinforced and durable material ensures a long service life, even under intensive use in professional settings. At the same time, the vacuum bag is easy to handle and can flexibly adapt to varying workpiece shapes. With the COLUMBUS Vacuflex, even particularly large or complex workpieces can be produced efficiently. The vacuum bag is therefore suitable both as a standalone tool for smaller production environments and as an addition to existing vacuum presses, significantly broadening the range of possible applications. Technical Specifications • Robust, fabric-reinforced vacuum bag • Highly flexible for a wide variety of workpiece shapes • Suitable for form bonding, veneering, and laminating • Ideal for large or complex workpieces • Simple integration into existing production processes • Perfectly suited as an accessory for vacuum presses Nwedsy Rkp Repfx Aa Uog The COLUMBUS Vacuflex is developed and manufactured directly by the producer and is designed for long-term use. High-quality materials and careful workmanship ensure high reliability and a long service life.

Tahun pembuatan: 2025, Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, VACUFLEX Kantong Vakum – Lebih Banyak Kemungkinan Tanpa Investasi Besar Anda ingin melakukan pekerjaan veneer atau laminasi bentuk—namun tanpa investasi besar pada mesin press? Maka kantong vakum VacuFlex inilah solusi yang tepat. Dengan alat ini Anda dapat: - dengan mudah melaminasi dan melakukan veneer (bentuk) - bekerja secara fleksibel dan efisien - menerima pesanan baru - memproduksi satuan secara ekonomis Ini berarti untuk Anda: Lebih banyak peluang di bengkel – tanpa kebutuhan ruang tambahan dan tanpa biaya tetap tinggi. Kondisi: siap pakai segera Cocok terutama untuk: - bengkel kecil Nwedpfxsy Rkp Ds Aa Ujg - awal dalam teknologi vakum - pelengkap perlengkapan yang sudah ada

Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, daya: 10,4 kW (14,14 hp), tipe perpindahan gigi: lain, jenis bahan bakar: diesel, warna: hijau, konfigurasi gandar: 1 as, kelas emisi: tidak ada, rem: lain, Tahun pembuatan: 2026, Perlengkapan: kebisingan rendah, TICAB BM Combo – Zwei Maschinen in einem. Maximale Effizienz für jedes Straßenbauprojekt. Der TICAB BM Combo ist eine leistungsstarke Doppelbitumenmaschine, die speziell für den professionellen Straßenbau und die Straßenunterhaltung entwickelt wurde. Er vereint einen 750-Liter-Bitumensprühgerät und eine 120-Liter-Rissvergusseinheit in einer kompakten, anhängermontierten Lösung – damit erhalten Auftragnehmer und Kommunen alles, was sie für schnelleres, effizienteres und profitableres Arbeiten benötigen. Ob Schlaglochsanierung, Haftkleberauftrag, Oberflächenbehandlung oder Asphaltabdichtung – der BM Combo überzeugt auf jeder Baustelle durch Präzision, Langlebigkeit und hervorragende Leistung. 🚀 Warum der TICAB BM Combo Ihre Rentabilität steigert: ✔ 2-in-1 System – Ersetzen Sie zwei separate Maschinen durch eine leistungsstarke Einheit und sparen Sie Kosten ✔ Schnellere Projektabwicklung – Sprühen und Versiegeln mit maximaler Effizienz ✔ Präziser Auftrag – Gleichmäßige Abdeckung für professionelle Ergebnisse ✔ Geringere Betriebskosten – Dieselmotor mit Hydrauliksystem für zuverlässigen, energieeffizienten Betrieb ✔ Für den Schwerlasteinsatz konzipiert – Entwickelt für die hohen Anforderungen kommunaler und industrieller Projekte Hauptvorteile: 750-Liter-Bitumensprühgerät + 120-Liter-Rissvergusseinheit Dieselmotor mit integrierter Hydraulikpumpe und Heizsystem Automatische Temperaturregelung für optimale Materialeigenschaften Manuelle Spritzlanze und breite Spritzleiste für flexible Anwendung Spülsystem für einfache Reinigung und Wartung Vollmobil, anhängermontiert für schnellen Transport zwischen den Einsatzorten Robuste Konstruktion für den langfristigen, intensiven Einsatz Ideal für: Straßen- und Autobahnbau Asphaltvorbereitung & Haftkleberauftrag Schlaglochsanierung und Rissverfüllung Oberflächenbehandlung & Abdichtung Kommunale Straßen, Parkplätze, Industrieflächen, Flughäfen, Radwege und mehr Warum TICAB wählen? Gefertigt von TICAB – der renommierten europäischen Marke für Straßentechnik. Der BM Combo ist für Anwender konzipiert, die Wert auf Zuverlässigkeit, Effizienz und Langlebigkeit legen. Mit nur einer Maschine senken Sie die Investitionskosten, minimieren Ausfallzeiten und maximieren die Produktivität – und erzielen dabei stets einwandfreie Ergebnisse bei Asphalt- und Bitumenarbeiten. Njdox U Am Nopfx Aa Ujwg 📞 Jetzt Kontakt aufnehmen Kontaktieren Sie uns für Preise, Verfügbarkeit, Lieferoptionen und vollständige technische Daten.

Kondisi: sangat baik (bekas), Tahun pembuatan: 1996, Torsion-free C-frame design made of steel Standard heating system Disc roller system with tolerance compensation for varying veneer thicknesses Regulation of heating performance during stationary and mobile operation Thread break roller Throat depth: 920 mm Feed rate: approx. 20 m/min Veneer thickness: approx. 0.4 - 2.0 mm Operating voltage: 400 V, 50 Hz, 3 Ph Total connected load: 0.97 kVA Including gluing spool & operating manual Dimensions (L x W x H): approx. 1280 x 580 x 1470 mm Nsdog Nn E Nopfx Aa Uowg Weight: 220 kg Note - Used machines: • Technical data subject to change and prior sale. • Quoted prices are ex works and include loading at the site! • The machine has been cleaned and functionally tested. • All machines are purchased as inspected, with no warranty or guarantee. Buyers are welcome to inspect the machines at the site. • Special agreements are only possible in written form. (We only respond to enquiries that include your full address and telephone number!)

Kondisi: bekas, Tahun pembuatan: 2014, Glue unit Nodouliqyepfx Aa Uswg Meler PUR Year of manufacture: 2014 Suitable for connection to: Kolbus KM 473 PUR spine gluing unit Premelter for PUR spine gluing unit

Kondisi: bekas, maks. ketebalan veneer: 2,0 mm, min. ketebalan veneer: 0,4 mm, bahan penyambung: benang lem dengan pemanasan udara panas, tekanan udara diperlukan: ya, cakram: ya, untuk mengangkut veneer di atas meja veneer; kontrol melalui pedal kaki; jenis mesin: model berdiri; kecepatan makan: 7 m/menit; jangkauan lengan: 900 mm; berat sekitar: 185 kg; dimensi: 1400 x 500 x 1680 mm. Lokasi gudang: Nattheim Nwjdpoxgqmxefx Aa Usg

Kondisi: bekas, Tahun pembuatan: 2018, Used machine Year of manufacture: 2018 Special feature: Machine for edge heights up to 100 mm! Condition: Factory-inspected by Lange Maschinenbau Equipment and technical specifications: - Machine table with 13 support rollers for improved workpiece guidance - Edge feed, synchronized with conveyor belt feed - Edge thickness adjustable via digital counter - Pneumatic roller separation with knife (for cuttable edges) - Three pressure rollers - Conveyor feed: - 0.25 kW - Approx. 1250 mm long - Approx. 6.0 m/min - 50 mm wide toothed belt with thick, workpiece-friendly rubber coating - Digital counter for height adjustment - Direct glue application to the workpiece: Drip-proof glue pot with bottom glue supply and quick heat-up time after machine standstill - Flush cutting unit: - For workpiece front and rear edges - Automatic sensing on the workpiece - Pneumatic cutting with knife for cuttable edges - Flush trimming unit: - With vertical scanning and horizontal guidance - Reproducible adjustment via digital counters Nwedpfswka S Iex Aa Ueg - 2 powerful 0.4 kW high-frequency motors - Infinitely variable speed from 4000 to 18000 rpm - Cutter Ø 70 mm, Z4, radius 2mm/15° - Central extraction port Ø 100 mm - 2 chip extraction covers with hose Ø 60 mm - Automatic height adjustment of the top cutter with conveyor feed - Continuous workpiece support, approx. 1800 mm long - Extension workpiece support rail, approx. 300 mm extendable - Rotatable foil carousel Ø: 800 mm - Workpiece width: min. approx. 80 mm - Workpiece thickness: 10 – 100 mm - Workpiece length: min. approx. 220 mm - Edge thickness: 0.4 – 2.0 mm - Roller separation: max. 1.0 x 55 mm, 2 x 45 mm - Glue pot heating power: 2.7 kW - Heat-up time: approx. 10 minutes - Working height: approx. 880 mm - Power connection: 400V, 50 Hz, 3Ph + N - Total power: 3.8 kW - Pneumatic connection: 6 bar Dimensions (without foil carousel): approx. 1800 x 700 x 1300 mm Weight: approx. 260 kg Availability: Short notice Location: Flörsheim

Kondisi: bekas, Tahun pembuatan: 1997, Column reach: 630 mm Feed rate: 7 m/min Nsdpfewbqi Sox Aa Uewg

Kondisi: bekas, Tahun pembuatan: 2011, jam operasional: 2.150 h, Labeller rotari KOSME Extra 9 / 720 untuk pelabelan botol dengan dua stasiun perekat mandiri (self-adhesive) + satu stasiun lem dingin, misalnya untuk banderol. Produsen: KOSME Model: Extra 9/720 Tahun produksi: 2011 Kapasitas: hingga 7.000 botol/jam Karusel: 9 stasiun Konfigurasi: 2 x kepala untuk label self-adhesive 1 x stasiun lem dingin (misal untuk banderol) Nwodpfxsywcgho Aa Ueg Jam kerja: hanya 2.141 jam! Dokumentasi teknis original. Kondisi teknis: mesin bekas, kondisi sesuai foto.

Kondisi: siap digunakan (bekas), Fungsionalitas: berfungsi sepenuhnya, Sistem pengelem untuk parket multi-lapis Prod. Soest Tipe DRM 2 1 400 + T 80 Stasiun pengelem dari pabrik parket, terdiri dari: - Mesin aplikasi lem SOEST DRM 2 1 400, untuk aplikasi lem satu sisi Tahun pembuatan 2017 Lebar kerja 400 mm - Sabuk konveyor sekitar 2500 mm Nsdpoy Rkhtefx Aa Uowg - Mesin press blok SOEST T 80 Tahun pembuatan 2017 Gaya tekan 80 t Lebar press sekitar 300 mm Panjang press sekitar 3000 mm Bukaan maksimum sekitar 1000 mm Gaya tekan 80 t 4 silinder press - Mesin press blok SOEST T 80 Tahun pembuatan 2019 Lebar press sekitar 300 mm Panjang press sekitar 3000 mm Bukaan maksimum sekitar 1000 mm Gaya tekan 80 t 4 silinder press

Kondisi: sangat baik (bekas), Tahun pembuatan: 2023, Oferta Technofold 1100 SL z systemem Gyro Specyfikacja: Prędkość maszyny: 350 m/min Prędkość etapowa: 20 m/min Szerokość pakowania: 160-1100 mm Wymiary maszyny: 22x1,88x1,5 m Nwedpfx Aasw Ec D Ae Ueg Masa maszyny: 9,2 t Maksymalne zużycie energii: 26 kW Zapotrzebowanie powietrza: 6 barów / max 10 m³/h Wyposażenie maszyny: Maszyna 4-6 punktowa Gyro – obracanie pakietów o 90° Sekcja wyrównania bocznego – lewa/prawa Sekcja wstępnego bigowania Automatyczna sekcja spodnia Serwomotory, tylna sekcja zginania 4/6-punktowego Dolny okrągły system klejenia lewy/prawy System kleju zimnego KQ z 4 dyszami Końcowa sekcja bigowania i zamykania Stacja transferowa Sekcja prasowania z niezależnym napędem Pneumatyczne wałki wprowadzające z systemem wyrównania SQUARING 2 Blok do stukania – SPANKER Próżnia na podajniku + wibrator Kamera z monitorem na wyświetlaczu

Kondisi: bekas, Tahun pembuatan: 1989, Folder gluer Jagenberg Diana 65-1, tahun produksi 1989. - Perekatan garis lurus - Perekatan 3 titik, crash lock, lock bottom - Sistem lem KQ dengan 4 nozzle Nsdpsw H Rc Njfx Aa Uswg - Mesin dibersihkan, dalam produksi – dapat diperiksa berdasarkan permintaan, kondisi sangat baik

Kondisi: sangat baik (bekas), NOMOR KATALOG 7926 DATA TEKNIS - panjang kerja: 6200 mm - lebar kerja: 150 mm - tinggi kerja: 1350 mm - 12 silinder hidrolik vertikal Nwodpfx Aeyu Tp Toa Ueg - dimensi (P/L/T): 6580/1270/2350 mm - berat sekitar 4000 kg KEUNGGULAN – kondisi sangat baik – mesin press bekas – belum dicat ulang – dirancang untuk penggunaan profesional Harga netto: 69.900 PLN Harga netto: 16.650 EUR Harga netto dihitung pada kurs 4,2 PLN/EUR (jika terjadi fluktuasi kurs yang signifikan, harga dapat berubah)

Kondisi: sangat baik (bekas), Tahun pembuatan: 1991, de-sofort-verfügbar-3-punkte-4-düsen-crash-lock-1-3-falz-cd-falz -schüttler-anleger Nwedjv E N R Djpfx Aa Usg

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1995, vega-700-mit-3-klebestellen Njdpswulmfefx Aa Uewg Maximale Geschwindigkeit: 400 Meter pro Minute Gesamtleistung: 23,5 kW Maximale Formatgröße: 770 x 550 mm Beschreibung der Maschine: Länge: 10 m, Breite: 1,5 m Die Maschine kann drei Klebestellen ausführen: eine seitliche Klebestelle sowie zwei Klebestellen durch Kaltleim-Auftrag mittels Leimdüsen für die Verschlussböden von Schachteln. HHS-Steuerung und Sprühdüsen sind vorhanden. Ausstattungsmerkmale: - Drei-Punkt-Klebung - Einzelpunkt-Klebung - Automatikboden (Crash-Lock) - Doppelwand-Kartonbearbeitung - Ausrichtung - 1/3 Vorfaltung

Tahun pembuatan: 2001, Kondisi: hampir baru (bekas), Etipack Model: SIST.1 FLEXO (head EMC DX) Nsdpfsfzknvsx Aa Ujwg Direction: Left-Right Type: Self-adhesive label applicator Serial: A1A357R1-1 Year of manufacture: 2001 Dimensions (L x W x H): 2,600 x 1,400 x 1,250 mm Conveyor length: 2,600 mm Conveyor width: 110 mm (belt) Press-on belt height: 90 mm Weight: 400 kg Power supply: 230 Volt – 50 Hz – 200 Watt Features: Machine suitable for wrap-around labelling of round and conical products Machine technically inspected Frequency-controlled conveyor

Kondisi: sangat baik (bekas), OBEL-P gluing line Gluing length – up to 3 m Gluing width – up to 200 mm Njdpfx Ajirm Rhoa Uowg The OBEL-P gluing line is a high-frequency (HF) press system developed primarily for applications in wood processing, especially in the window and door industry. The line is notable for its versatility and can process materials such as scantlings, laminated timber, and glued boards. OBEL-P gluing lines are available in various configurations – from manual to fully automatic versions that perform tasks such as automatic loading, gluing, pressing, and stacking. This maximizes efficiency and minimizes manual labor. Key technical specifications include adjustable HF power from 40 to 200 kW, high adhesive application speeds of up to 300 meters per minute, and modular designs that allow for additional automation. High-performance models in this line can achieve high production capacities, with some systems producing up to 150 m³ per shift.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2010, klebeholzlinie2024 Nwjdpfx Aaew Anc Ej Usg

Kondisi: sangat baik (bekas), Tahun pembuatan: 2012, 01 Nwjdpfxevw Eh Ns Aa Ueg

Tahun pembuatan: 2001, Kondisi: baik (bekas), IMA gluing unit Spare part for e.g. IMA 680 / 480 / 980 Edge banding unit for 4-sided edging and all-round joint gluing, featuring: - Main pressure roller, diameter 100 mm, with pneumatically controlled secondary pressure roller, diameter 35 mm - Glue application for edge material coating, with temperature and level control - Servo drive for edge feed, with automatic adjustment to feed speed - Hot air post-activation unit, 7.5 kW, on the glue application side - IR emitter, 600 watts, on the decorative side for material forming with small radii - Pneumatically driven separating saw - Joint edge detection sensor - NC axis Nwsdebxx Ikspfx Aa Uog Rotation range up to 740 degrees; pneumatically operated Z-lift 125 mm - Separate NC axis for Y movement (for portal machines in X), operating independently of main axis Manufactured in 2001, removed from machine IMA 680 V No. 2216 Scope of delivery as shown in the picture Please check installation compatibility with your machine. No returns accepted. The unit was in production for approximately two years and is in good condition Technical specifications subject to change

Kondisi: sangat baik (bekas), 4-axis (X-Y-Z-C) CNC machining center for milling, drilling, cutting, and edge banding Cantilever design, ICOS-Open control system. Software: IMAWOP + IMAwinCAD Set-up table with consoles. No. 6 consoles (1450 mm) DYNAPOINT Automatic positioning of the consoles (X-axis) Automatic positioning of the vacuum clamps (Y-axis) Automatic tool changer with 18 tool positions Maximum working area (X - Y - Z): 6300 x 1450 x 100 mm Minimum workpiece size (X-Y-Z): 320 x 115 x 14 mm Maximum workpiece size (X-Y-Z): 5600 x 2100 x 38 mm Chip conveyor Supplied with separate electrical control cabinet and panel. Total connected load: 34 kW WORKING UNITS (UPPER): No. 1 vertical main spindle (milling unit) HSK F63 - drive power 18 kW (S6) Saw, fixed at 90°, diameter 200 mm Edge banding unit (installed on the machine) VT 100 No. 2-position roll magazine Combination unit (flush trimming/profiling knife) Feed system with brush table No. 6 clamps for securing and moving panels on the machine’s suction cups Workpiece outfeed with motorized rollers and 90° angle transfer system Nwedstixpujpfx Aa Ueg