Beli Engel Engel Duo 2400/650 bekas (5.561)

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2019, gaya penjepit: 6.500 kN, diameter sekrup: 60 mm, berat keseluruhan: 6.500 kg, produsen pengendali: ENGEL, This electric injection moulding machine Engel duo 2400/650 was manufactured in 2019. It features a screw diameter of 60/70/80 mm, a screw stroke of 315 mm, and a maximum injection volume of 890 cm³. The clamping force reaches up to 6500 kN, with a maximum mould weight of 11,000 kg. Take advantage of this opportunity to purchase the Engel duo 2400/650 electric injection moulding machine. Contact us for further information on this machine. Additional Equipment • Oil tank capacity – injection unit: 500 l • Maximum cooling capacity (at 32°C water inlet): 29.40 kWcool • Water consumption (32°C): 4.80 m³/h Machine Advantages Quality Features • The machine is equipped with electric water manifolds (4 E-Flomos, each with 8 circuits). • The injection units are fitted with accumulators, enabling a high injection pressure of up to 2400 bar with a 60 mm screw. Technical Features • Maximum injection capacity: 890 cm³ • Screw torque: 2000 Nm // maximum screw speed at reduced torque: 275 min⁻¹ • Reduced torque at maximum screw speed: 1600 Nm Gbodpfsy D Npcjx Alkel • Recovery rate (3-zone screw): 51 g/s // Recovery rate (barrier screw): 67.1 g/s • Injection rate: 353 cm³/s • Nozzle stroke: 950 mm • L/D ratio: 24.0 • Heating zones including nozzle: 8 // Heating capacity: 27.5 kWel • Opening force with cushion: 510 kN • Maximum platen distance: 1750 mm Additional Information Dimensions & Weight • Width of ejection chute: 1100 mm • Weight of clamping unit: 20,000 kg • Maximum mould weight (movable platen): 7,330 kg • Maximum mould weight (fixed platen): 7,330 kg • Maximum total mould weight: 11,000 kg Cycle Data (Euromap 6) • Stroke: 700 mm • Dry cycle time: 2.9 s Control System: Monocompute CC300 Key Features • 21.5" Full HD touchscreen • USB interface / Ethernet port • E-move control element • 3 key cards for user login • Graphic icons for cycle control • Display languages: German, English • Acoustic error signal / signal light for fault indication Programs & Monitoring • Power Control: optimises motor performance during metering • Mould parallelism measurement • IQ Weight Monitor: monitors shot weight and viscosity • IQ Weight Control: automatic adjustment of injection parameters in case of fluctuations • Quality monitoring interface (injection time, dosing time, pressure, cycle time) • Continuous ejection possible when monitoring is deactivated Clamping Unit & Platens • Reinforced platens (FAP & BAP each +50 mm) • Reduced min./max. mould height and platen spacing (-100 mm due to reinforcement) • FAP: smallest possible platen opening, spherical cap minimised • BAP: without ejector opening • Additional threads as per EUROMAP VOL1 • Centring grooves as per drawing • Platen ejector – Variant A (customised to clamping pattern) • Safety interface for ejector Hydraulics & Core Pulls • Hydraulic core pull: • 1-fold on moveable platen • 2-fold on fixed platen • 2-fold on moveable platen with PQ proportional valve, volume measurement, pressure/speed adjustment • Interface for core pull intermediate position Mould Heating & Cooling • Mould heating: 16 circuits, max. 40 kW heating capacity (Euromap 14)

Kondisi: sangat baik (bekas), Tahun pembuatan: 2006, Data Teknis Perkiraan dimensi di lokasi (P × L × T): 8.300 × 2.500 × 2.330 mm Berat (kurang lebih): 33.000 kg Nomor seri: 161394 Deskripsi barang Unit Penutup Gaya penutupan: 6500 kN Jarak antar pilar: 1025 × 930 mm Gbjdpfx Aoyu Niielkol Tinggi cetakan minimum/maksimum: 450 / 950 mm Bukaan maksimum: 1800 mm Unit Injeksi Diameter screw: 90 mm Volume injeksi: 2480 cm³ Berat injeksi: 2254 g Perlengkapan listrik-hidrolik Daya nominal motor pompa: 55 kW Daya pemanas: 62 kW

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2013, jam operasional: 60.244 h, Data Umum Berat mesin: 14.000 kg Tinggi: 2.355 mm Dimensi Panjang mesin: 7.800 mm Unit Injeksi Gbsdpfx Aljx Nr R Hekol Diameter sekrup: 105 mm Unit Penjepit Gaya penjepit: 6.500 kN Engel DUO 7050/650 pico ini diproduksi pada tahun 2013. Mesin ini memiliki gaya penjepit 6.500 kN, volume injeksi maksimum 4.160 cm³, dan diameter sekrup 105 mm. Mesin dilengkapi dengan antarmuka robot (Euromap 67) dan masih beroperasi dalam kondisi sangat baik. Jika Anda mencari kemampuan injection moulding berkualitas tinggi, pertimbangkan mesin Engel DUO 7050/650 pico yang kami tawarkan. Hubungi kami untuk informasi lebih lanjut mengenai mesin ini. Jenis Aplikasi Injection Moulding

Kondisi: sangat baik (bekas), Tahun pembuatan: 2011, ENGEL DUO 5550/650 pico injection moulding machine Control System: CC200 Year of Manufacture: 2011 Operating Hours: 61,606 h Robot: Viper 40 1. Clamping Unit Clamping Force: 6500 kN Tie Bar Distance (H × V): 1100 × 960 mm Platen Dimensions (H × V): 1510 × 1440 mm Mould Height (min./max.): 650 / 1150 mm Mould Opening Stroke: 1400 mm Max. Daylight Between Platens: 2050 mm Maximum Mould Weight: 11,000 kg Godeyw Aa Ujpfx Alkobl Ejector Force: 95 kN Ejector Stroke: 250 mm Tie Bar Diameter: 175 mm 2. Injection Unit (Aggregate 5550) Screw Diameter: 90 mm (reinforced for up to 30% fibre content) Maximum Injection Volume: 2740 cm³ Maximum Shot Weight (PS): 2520 g Injection Pressure (max./boost): 2180 bar Standard Injection Pressure: 1910 bar Screw L/D Ratio: 20 Screw Stroke: 430 mm Maximum Screw Speed: 148 rpm Plasticizing Rate: 77 g/s Nozzle Contact Force: 150 kN 3. Drive and Power Supply Installed Drive Power: 90 kW Barrel Heating Power: 56 kW Number of Heating Zones: 6 Hydraulic Oil Tank Capacity: 1000 l 4. Special Equipment and Hydraulics Core Pull Circuits: - 6 hydraulic circuits on the moving platen - 2 hydraulic circuits on the fixed platen Cascade Valves: 4 pcs (installed on fixed platen) 5. General Characteristics Two-platen machine design (DUO series) for the production of large-size plastic components. The construction provides: - High rigidity of the clamping system - Suitable for heavy moulds and large opening strokes Additional Information: - Screw reinforced for up to 30% fibre content - All hydraulic hoses replaced in Q4 2024 - Machine condition: mint, ready for production Machine available immediately, professionally maintained, and ready for instant operation.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2011, Injection Moulding Machine: ENGEL DUO 5550/650 pico Control Unit: CC200 Year of Manufacture: 2011 Operating Hours: 61,606 h 1. Clamping Unit Clamping Force: 6,500 kN Tie Bar Spacing (H × V): 1,100 × 960 mm Platen Dimensions (H × V): 1,510 × 1,440 mm Mould Height (min./max.): 650 / 1,150 mm Mould Open Stroke: 1,400 mm Max. Daylight Between Platens: 2,050 mm Max. Mould Weight: 11,000 kg Ejector Force: 95 kN Ejector Stroke: 250 mm Tie Bar Diameter: 175 mm 2. Injection Unit (5550 Aggregate) Screw Diameter: 90 mm Max. Shot Volume: 2,740 cm³ Max. Shot Weight (PS): 2,520 g Injection Pressure (max./boost): 2,180 bar Injection Pressure (standard): 1,910 bar Screw L/D Ratio: 20 Screw Stroke: 430 mm Max. Screw Speed: 148 rpm Plasticising Rate: 77 g/s Nozzle Contact Force: 150 kN Gbsdpfx Aljywrtweksl 3. Drive and Power Supply Installed Drive Power: 90 kW Barrel Heater Power: 56 kW Number of Heating Zones: 6 Hydraulic Oil Tank Capacity: 1,000 l 4. Special Equipment & Hydraulics Core Pull Circuits: - 6 hydraulic circuits on the moving platen - 2 hydraulic circuits on the fixed platen Cascade Valves: - 4 pcs (installed on the fixed platen) 5. General Features Two-platen design (DUO series) suitable for the production of large-size plastic parts. The robust clamping unit provides high rigidity and enables the use of heavy moulds while maintaining a large mould open stroke. CC200 control system offers precise process parameter management and seamless integration with automation systems and auxiliaries. If required, I can also prepare: - a more commercially oriented (marketing) version for a sales listing, - a German or English translation, - or a market value analysis of this machine.

Kondisi: bekas, Tahun pembuatan: 2021, jam operasional: 14.650 h, gaya penjepit: 1.100 kN, volume langkah: 350 cm³, tekanan injeksi: 1.455 batang, berat keseluruhan: 60.000 kg, diameter konveyor sekrup: 50 mm, Dasar Pengiriman: ex lokasi Waktu Pengiriman: sesuai kesepakatan Syarat Pembayaran: 100% sebelum pengambilan mesin, bersih tanpa potongan Gjdpfx Aloy R Eq Ajkobl

Kondisi: bekas, Tahun pembuatan: 2018, de-to-en-mechanical Gbodpfey I R Tqjx Alksl

Kondisi: bekas, Tahun pembuatan: 2018, 1 Gbsdpey I R Insfx Alkol

Kondisi: sangat baik (bekas), Tahun pembuatan: 2015, de-to-hu-Machineseeker-ENGEL-victory-650-120 Gbsdey Rqhaspfx Alksl

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2013, jam operasional: 60.672 h, gaya penjepit: 4.000 kN, diameter sekrup: 80 mm, tinggi total: 2.360 mm, berat keseluruhan: 11.000 kg, panjang produk (maks.): 7.420 mm, Engel DUO 3550/400 pico ini diproduksi pada tahun 2013. Mesin ini memiliki gaya penutup sebesar 4.000 kN, diameter sekrup 80 mm, dan volume injeksi maksimum 1.960 cm³. Dimensi mesin adalah 7.420 × 2.360 × 2.360 mm, dengan berat 11.000 kg. Dilengkapi dengan antarmuka robot Euromap 67. Hubungi kami untuk informasi lebih lanjut mengenai mesin ini. Gbedpfx Ajx Nr Ryjlksl

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2003, gaya penjepit: 8.000 kN, diameter sekrup: 90 mm, lebar total: 3.000 mm, tinggi total: 2.500 mm, berat keseluruhan: 44.000 kg, panjang produk (maks.): 8.900 mm, Hydraulic injection moulding machine from 2003. This Engel DUO 5550/800 features a clamping force of approx. 800 tonnes and a screw diameter of approx. 90 mm. It has a shot volume of about 2700 cm³ and a maximum injection pressure of about 1900 bar. If you are looking for a high-quality injection moulding machine, you should consider the Engel DUO 5550/800, which we are offering for sale. Contact us for further details. • Injection volume: ~2700 cm³ • Max. injection pressure: ~1900 bar • Plasticising rate: ~77 g/s Godpfjy Alwmsx Alkobl • Clamping unit: Two-platen design (no traditional toggle system), larger mould space for easier changeovers, even clamping force distribution • Injection unit: Hydraulic, high-performance plasticising; suitable for thick-walled or large-volume parts • Typical applications: Automotive components (e.g. bumpers, dashboard modules), large housings and covers, industrial parts, thick-walled technical parts • Advantages: High clamping force for large parts, more compact than conventional tie-bar machines, robust industrial design, easy to automate Additional equipment • Not specified/included in the information provided

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1996, Fungsionalitas: berfungsi sepenuhnya, gaya penjepit: 6.374 kN, diameter sekrup: 90 mm, berat injeksi: 2.400 g, Tanpa harga minimum - penjualan dijamin kepada penawar tertinggi! RINCIAN TEKNIS Gaya penutup: 650 t Jarak antar tie bar: 102,5 mm x 92,5 mm Gbjdpfxey Ewxue Alkel Diameter ulir: 90 mm Berat injeksi: 2.400 g Catatan: Jika membeli beberapa item dari lokasi yang sama (lihat penawaran di bawah), Anda akan diberi potongan biaya pembongkaran dan pemuatan yang lebih murah.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1999, Fungsionalitas: berfungsi sepenuhnya, gaya penjepit: 1.716 kN, diameter sekrup: 45 mm, volume langkah: 318 cm³, panjang pelat: 820 mm, lebar pelat: 750 mm, Tidak ada harga minimum – penjualan dijamin kepada penawar tertinggi! DETAIL TEKNIS Gbedey Ev R Aspfx Alkol Gaya penutupan: 175 t Diameter ulir: 45 mm Volume injeksi: 318 cm³ Tinggi pemasangan alat min.: 250 mm DETAIL MESIN Pelat penjepit: 820 mm x 750 mm PERLENGKAPAN Pelat penjepit yang diperbesar Catatan: Jika membeli beberapa item dari lokasi yang sama (lihat penawaran di bawah), Anda akan mendapatkan biaya pembongkaran dan pemuatan yang lebih murah.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2007, jam operasional: 91.708 h, gaya penjepit: 8.000 kN, diameter sekrup: 135 mm, volume langkah: 8.870 cm³, panjang total: 11.810 mm, lebar total: 3.200 mm, tinggi total: 2.900 mm, 1 Gsdpfxeyv E Hbj Alksbl

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1998, jam operasional: 29.598 h, Data Umum Berat mesin: 20.000 kg Tinggi mesin: 2.230 mm Dimensi Panjang mesin: 8.840 mm Gbodpfx Aex Nr H Ielksl Unit Injeksi Diameter sekrup: 80 mm Unit Penjepit Gaya penjepit: 5.500 kN Engel Duo 3550/550 Tech ini diproduksi pada tahun 1998. Mesin ini memiliki gaya penjepit sebesar 5.500 kN, volume injeksi maksimum 1.960 cm³, dan diameter sekrup 80 mm. Dimensi mesin adalah 8.840 x 2.520 x 2.230 mm dengan berat 20.000 kg. Jika Anda mencari kemampuan moulding injeksi berkualitas tinggi, pertimbangkan mesin Engel Duo 3550/550 Tech yang kami tawarkan. Hubungi kami untuk informasi lebih lanjut. Jenis Aplikasi Injeksi Moulding

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1999, gaya penjepit: 1.100 kN, diameter sekrup: 150 mm, lebar total: 1.400 mm, tinggi total: 1.150 mm, berat keseluruhan: 77.000 kg, Mesin injection molding hidrolik tahun 1999. Engel ES 16050/1100 DUO ini memiliki gaya penutupan 1100 ton dan diameter sekrup 150 mm. Mesin ini memiliki jarak bukaan 1800 mm dan bobot total 77.000 kg. Jika Anda mencari mesin injection molding berkualitas tinggi, pertimbangkan Engel ES 16050/1100 DUO yang kami tawarkan untuk dijual. Hubungi kami untuk informasi lebih lanjut. Gedoyuc Uropfx Alkjbl • Jam kerja: 86.200 jam • Diameter kolom: 230 mm • Displacement: 10.955 cm³ • Tekanan injeksi: 1.330 bar • Gaya ejektor: 215 N • Jarak bukaan: 1800 mm • Daya pemanas: 113 kW (153,64 HP)

Kondisi: baik (bekas), Tahun pembuatan: 2008, jam operasional: 59.934 h, diameter sekrup: 45 mm, volume langkah: 318 cm³, ENGEL Victory 650-120 Tech Stock no.: 503240 Manufacturer: ENGEL Model: VICTORY 650-120 Tech Control unit: EC200 A02 Year of manufacture: 2008 Operating hours: 59,934 h Technical Data – Clamping Unit Clamping force: 1,200 kN Platen size (H x V): 740 x 680 mm Min. mold height: 300 mm Max. daylight: 800 mm Opening stroke: 507 mm Ejector stroke: 130 mm Ejector force: 40 kN Movable platen centering diameter: 125 mm Fixed platen centering diameter: 125 mm Mold weight: 825 kg Gbedpoytfn Esfx Alksl Technical Data – Injection Unit Screw diameter: 45 mm Shot volume: 318 cc Injection pressure: 1,525 bar Screw length: 20 L/D Screw stroke: 200 mm Screw speed: 290 rpm Free-flow injection rate: 220 g/s PS Number of heating zones: 5 Nozzle stroke: 300 mm Dimensions & Weight Machine dimensions (L x W x H): 4.86 m x 1.5 m x 2.1 m Total weight: 7,600 kg Equipment Display language German CEE socket 16A 2x hydraulic core pull 2x air valve Machine with water battery Machine without material hopper Leveling elements Schuko socket 10A 8x tool heating zones

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2013, jam operasional: 65.000 h, gaya penjepit: 5.000 kN, diameter sekrup: 90 mm, tinggi total: 2.355 mm, berat keseluruhan: 14.000 kg, panjang produk (maks.): 7.800 mm, This Engel DUO 4550/500 pico was manufactured in 2013. It features a clamping force of 5,000 kN, a screw diameter of 90 mm, and a maximum injection volume of 2,480 cm³. The machine dimensions are 7,800 x 2,405 x 2,355 mm, with a weight of 14,000 kg. It is currently in production, has logged approximately 65,000 operating hours, and is in excellent condition. Please contact us for further information about this machine. • Maximum injection volume: 2,480 cm³ • Minimum mould height: 350 mm • Maximum mould height: 900 mm • Clamping platen opening stroke: 1,300 mm • Clamping platen dimensions (W x L): 1,270 x 1,260 mm • Tie bar spacing (H x V): 910 x 830 mm • Motor power: 83 kW • Heating power: 61.2 kW • Number of electrical connection pins: 32 • Injection nozzle radius (tip): R35 • Locating ring diameter: 200 mm • Robot interface: Euromap 67 • Number of cores: 0 • Number of heating zones: 0 • Operating hours: approx. 65,000 h • Condition: Excellent • Status: In production Additional equipment Gjdpfsx Nr Uxox Alkebl • Robot (equipped)

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2019, jam operasional: 14.674 h, diameter sekrup: 45 mm, produsen pengendali: ENGEL, model controller: CC300 microcomputer, This Engel Duo 740 H / 740 M / 500 WPX combi M injection moulding machine was manufactured in 2019. It features a compact two-platen design, a minimal footprint, and intelligent servo hydraulics for reduced energy consumption. The machine is equipped with a CC300 microcomputer control system, including a 21.5-inch full HD touchscreen, and an advanced material package suitable for thermoplastics up to 350°C. For further information about this injection moulding machine, please contact us. Additional Equipment • Mould heating: 32 control circuits, max. heating capacity 60 kW • Vacuum compressed air circuits: with venturi nozzle and pressure switch • Air solenoid valves: 2/2-way, R1/2 inch • Autoprotect injection monitoring: self-learning system for mould protection • Advanced material package: for thermoplastics up to 350°C, max. reinforcement level 30% Machine Advantages Qualitative Machine Benefits • High-precision and sensitive mould protection • Advanced control system with 21.5" full HD touchscreen and user authorization system Gbjdpfx Ajx Nr Tnelkjl Technical Machine Benefits • Clamping plate stroke: 1800 mm • Max. distance between clamping plates: 2650 mm • Mould installation height: min. 850 mm, max. 1740 mm • High operational safety due to robust platen guidance and precise platen parallelism • Energy efficient with reduced power consumption and intelligent servo-hydraulics (Engel ecodrive) • Multi-circuit hydraulics for simultaneous movements (ejector, core pull, nozzle) Additional Information Machine still under power

Kondisi: sangat baik (bekas), Tahun pembuatan: 2004, Injection Moulding Machine ENGEL DUO 11050/2300 Basic Data Manufacturer: ENGEL Model: DUO 11050/2300 Year of manufacture: 2004 Operating hours: 70,029 h Clamping Unit Clamping force: 2,300 kN Platen dimensions (horizontal × vertical): 2,900 × 2,500 mm Tie-bar spacing (horizontal × vertical): 2,000 × 1,600 mm Minimum mould height: 700 mm Maximum mould height: 1,890 mm Maximum opening stroke: 3,800 mm Injection Unit Screw diameter: 135 mm Shot volume: 8,870 cm³ Shot weight (PS): 8,071 g Maximum injection pressure: 1,600 bar Dimensions and Weight Net machine weight: 113 t Control cabinet weight: 18 t Total weight: approx. 131 t Optional ESS Energy Saving System The machine can be equipped with a modern ESS (Energy Saving System) servo drive, which improves the energy efficiency of hydraulic injection moulding machines. The system controls the operation of the hydraulic pump motor via a frequency inverter, adjusting the motor speed to the actual demand during the production cycle. As a result, electric power is only drawn when truly needed. ESS System Benefits: - Reduction of energy consumption by up to 30% Gbsdpfxsyuf Tde Alkol - Servo drive technology for the hydraulic pump - Global quality and proven technology used in the plastics processing industry - Reduced energy loss during machine idle times - Lower heat build-up in the hydraulic system - Extended lifespan of the motor and hydraulic components - Can be retrofitted to existing hydraulic injection moulding machines The ESS system significantly reduces machine operating costs while maintaining full production parameters.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2016, gaya penjepit: 500 kN, Perlengkapan: dokumentasi / manual, Engel duo 1800/500 eco drive Godpfx Aow Hbylolksbl Gaya penutup: 500 t Diameter sekrup: 70 mm Volume injeksi: 1139 cm3 Tekanan injeksi: 1735 bar Jarak antar kolom V: 830 mm Jarak antar kolom H: 910 mm Tipe: Horisontal Penggerak: Hidrolik Kontrol CC300 Jam operasi: 38.000 Euromap 67 2 penarik inti Ecodrive 2 pompa Sistem penjepit cepat

Kondisi: siap digunakan (bekas), großformat-zweikomponenten-spritzgießmaschine-engel Gbjdpfx Aeymfdgolkjl

Kondisi: sangat baik (bekas), Tahun pembuatan: 2006, Fungsionalitas: berfungsi sepenuhnya, Data teknis Tahun pembuatan: 2006 Sisi penutup Gaya penutupan: 8000 kN Ukuran pelat penjepit maks.: 1520 mm Jarak antar kolom terang: 1170 mm Tinggi pemasangan min.: 700 mm Tinggi pemasangan maks.: 1300 mm Gedpfxex Up Utj Alksbl Jarak antar pelat maks.: 2300 mm Jarak pembukaan/tinggi pemasangan maks.: 1000 mm Langkah ejektor: 300 mm Sisi injeksi 1 Diameter sekrup: 105 mm Volume langkah: 4160 ccm Sisi injeksi 2 Diameter sekrup: 90 mm Volume langkah: 3050 ccm

Kondisi: sangat baik (bekas), Tahun pembuatan: 2007, Engel Duo 11000H/7000H/1300 Tahun pembuatan: 2007 Data Teknis Unit Penjepit Gbedpfx Aox Up Rnjlksl Gaya penjepit: 13.000 kN Jarak pembukaan: 3.000 mm Tinggi cetakan minimum: 1.000 mm Tinggi cetakan maksimum: 1.800 mm Jarak maksimum antara pelat: 4.000 mm Pelat pemasangan: 2.200 x 1.990 mm Jarak antar tiang (bebas): 1.530 x 1.275 mm Unit Injeksi 1 Diameter screw: 120 mm Jarak dosis: 570 mm Volume langkah maksimum: 6.450 cm3 Panjang screw L/D: 20 Tekanan injeksi spesifik: 1.794 bar Jarak nozzle: 1.000 mm Jumlah zona pemanas: 6 Unit Injeksi 2 Diameter screw: 120 mm Jarak dosis: 4.800 mm Volume langkah maksimum: 5.430 cm3 Tekanan injeksi spesifik: 1.370 bar Jarak nozzle: 1.000 mm

Kondisi: bekas, Tahun pembuatan: 2001, Technical details: Screw diameter: 105 mm Shot weight in polystyrene: 4,940 g/PS Gbjdpfx Astuncvslkel Clamping force: 9,000 kN Machine weight approx.: 19 t In serial production Machine and robot condition are regularly inspected through the EngelCare program The linear robot on the machine was completely overhauled in 2021