Beli Engel Insert 200H/40 bekas (24.838)

Kondisi: baik (bekas), Tahun pembuatan: 2004, Engel INSERT 200H/40 Control unit: CC100 Condition: functional Clamping force: 400 kN Opening stroke: 300 mm Ejector force: 20 kN Ejector stroke: 100 mm Max. opening: 570 mm Min. opening: 270 mm Platen size: 590x340 mm Screw diameter: 25 mm Screw length: 140 mm Injection volume: 69 cm³ Injection pressure: 2090 bar Weight: 5400 kg Pump drive power: 15 kW Fgsdpetrhv Sofx Airjc

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2011, gaya penjepit: 400 kN, diameter sekrup: 18 mm, berat keseluruhan: 5.850 kg, produsen pengendali: ENGEL, model controller: n/a, Mesin Engel Insert 80V/40 ini diproduksi pada tahun 2011. Mesin cetak injeksi vertikal ini ideal untuk komponen presisi berbahan termoplastik. Pertimbangkan kesempatan untuk membeli mesin cetak injeksi vertikal Engel Insert 80V/40 ini. Silakan hubungi kami untuk informasi lebih lanjut. Keunggulan Mesin Keunggulan Teknis: • Jarak keluaran ejector: 105 mm • Jarak gerak nozzle: 380 mm • Diameter meja putar: 1200 mm • Penggerak meja putar: hidrolik • Penggerak ejector: hidrolik • Daya terpasang: 22 kW • Bukaan maksimum: 520 mm / bukaan minimum: 185 mm Informasi tambahan Fgjdpfxjx D Nm Eo Airec Mesin masih dalam kondisi teraliri listrik

Kondisi: baik (bekas), Tahun pembuatan: 2007, en-18597 Fgsdjy Au I Uepfx Airsc

Tahun pembuatan: 2014, Kondisi: siap digunakan (bekas), Clamping force: 600 kN, Weight: 9 t, Operating hours: 3,638 h, equipped with ENGEL viper 20 handling robot. Fjdoh Nypfjpfx Airjgc

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2010, jam operasional: 23.905 h, Fungsionalitas: berfungsi sepenuhnya, gaya penjepit: 600 kN, diameter sekrup: 35 mm, volume langkah: 135 cm³, tekanan injeksi: 2.221 batang, langkah pembukaan: 335 mm, panjang total: 2.420 mm, lebar total: 1.700 mm, tinggi total: 3.100 mm, berat keseluruhan: 6.700 kg, Perlengkapan: dokumentasi / manual, Dijual mesin injection molding ENGEL INSERT 200V/60 yang terawat dengan hanya 23.905 jam operasi. Mesin ini hanya digunakan untuk pengujian sampel. Inspeksi dengan arus listrik dapat dilakukan kapan saja! Data teknis sesuai gambar! Mesin tersedia segera! Fedjy Iwlajpfx Airjgc

Kondisi: sangat baik (bekas), Tahun pembuatan: 2015, Engel Victory 200H/60W/180 Combi / Production Line with Engel Viper 20 Robot Year of Manufacture: 2015 Injection Unit: - Screw diameter: 22 mm - Shot weight: approx. 54 g - Injection pressure: 2,392 bar - Dosage volume: 61 cc Clamping Unit: - Clamping force: 180 t - Tie bar distance: 0 x 0 mm - Platen size: 1,020 x 980 mm - Ejector: hydraulic - Clamping unit: toggle lever Control system: CC 300 touchscreen Additional equipment: - 2-component machine with original Engel Viper 20 robot - Tie-bar-less machine, hybrid: energy-efficient, high-speed, and very quiet - Operating hours: approx. 20,000 h in automatic mode - Euromap 67 Fgodpfxoy Sl H Te Airjc - Robot interface - 4x air valve - 6x hydraulic core pullers - Hot runner control with 36 zones - Reinforced injection units - bimetallic - Second injection unit mounted at an angle, screw diameter fi 15 mm (18 cc/2,203 bar) - Main drives: 2x servo motors controlled by inverters - Proportional valves on injection units - precision injection - Kistler sensor for mold pressure regulation - Parallel movements - The machine is equipped with an additional servo motor for mold drive - Inputs/outputs for peripheral devices Engel Viper 20 Robot Year of Manufacture: 2015 - High-speed robot, 5 axes: X, Y, Z, A, C axes driven by electric servo motors - Robot is integrated with the machine and has an additional control panel - Robot safety package - Robot with adapter and protective housing Dimensions: - Weight: 13,200 kg - Length/Width/Height: 5.86 x 1.98 x 2.51 m All offered machines are started up by our service technicians before sale. A video of the technical tests of the selected machine can be provided, or you can participate in technical live tests at our company in Łódź. Price: On request

Kondisi: sangat baik (bekas), Tahun pembuatan: 2007, Engel Insert 80V/80V/100 2F / 2-C Tie Barless Machine, Vertical / Excellent Technical Condition Year of manufacture: 2007 Injection Unit: Screw diameter: 2 x 25 mm Shot weight: approx. 49 g Injection pressure: 1214 bar Dosage volume: 54 cc Clamping Unit: Clamping force: 100 t Tie bar distance: 0x0 mm Ejector: hydraulic Clamping unit: hydraulic Control system: CC 200 Additional Equipment: Tie barless machine with two vertical injection units, with rotary table Air valve x 6 Hydraulic core pull x 2 Controller for hot runner (12 circuits) Infrared safety curtains Thermoplastic and rubber injection units available for this machine Rotary table diameter: 1200 mm The machine has been regularly maintained by authorized Engel service in Germany Dimensions: Weight: 9400 kg Fgsdpfx Ajy Sl Eioirsc Length/Width/Height: 4.85x1.47x2.30 m Drive: Pump/Motor: 30 kW All offered machines are started up by our service technicians before sale. It is possible to receive a video of the technical tests for the selected machine or to participate in live technical tests at our facility in Łódź. Price: On request

Kondisi: sangat baik (bekas), Tahun pembuatan: 2011, jam operasional: 57.077 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 179742, gaya penjepit: 700 kN, diameter sekrup: 30 mm, volume langkah: 99 cm³, tekanan injeksi: 1.451 batang, berat injeksi: 89 g, Here we offer a well-maintained used injection moulding machine as part of our injection moulding machinery dealership. Fodpfx Aiey Ir Nysregc Of course, we also purchase well-maintained injection moulding machines from model year 2010 onwards. We have been wholesalers of injection moulding machines for over 25 years. Vertical injection moulding machine with rotary table – complete maintenance history (documented annually) Manufacturer: Engel Model: Insert 200H/70 Serial number: 179742 Year of manufacture: 2011 Operating hours: 57,077 h Control system: CC 200 Languages: German, English Fully functional Condition: very well maintained Single previous German owner xxxxx without shown peripheral equipmentxxxxx Extras: - Light curtain - Freely programmable inputs and outputs - 9 freely programmable inputs, programmable per station - 9 freely programmable outputs - Euromap 67 handling interface - Charge amplifier for pressure-dependent post-injection switching, including graphical display pages - 3 potential-free monitoring inputs for monitoring peripheral equipment such as temperature control units - Euromap 63 interface for connection to machine data acquisition systems - Hot runner control/valve gate control - Complete maintenance booklet - Languages: German – English Injection unit: Screw diameter: 30 mm Shot weight: 89 g/PS Injection pressure: 1,451 bar (increased: 2,205) Shot volume: 99 cm³ Clamping unit: Clamping force: 70 t / 700 kN Rotary table diameter: 1,200 mm Opening stroke: 305 mm Ejector stroke/force: 105 mm / 20.1 kN Clamping unit fully electric Warranty: Warranty up to initial commissioning Loading/Shipping: Free loaded onto buyer's truck or free delivery within Germany against freight charge reimbursement Available from our warehouse in Hannover, Germany

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2014, Fungsionalitas: berfungsi sepenuhnya, gaya penjepit: 980 kN, Tanpa harga minimum – penjualan dijamin kepada penawar tertinggi! DETAIL TEKNIS Fedsy Ewmxjpfx Airogc Gaya penutupan: 100 t Catatan: Jika Anda membeli beberapa item dari lokasi yang sama (lihat penawaran di bawah), Anda hanya akan dikenakan biaya pelepasan dan pemuatan yang lebih murah.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2004, Engel INSERT 330H/90 Control system: CC100 Condition: fully functional Vertical machine with horizontal injection Rotary table diameter: 1100 mm Clamping force: 90 tons Max. opening: 570 mm Min. opening: 270 mm Platen size: 590 x 340 mm Screw diameter: 40 mm Screw length: 160 mm Fgodou Dbkdjpfx Airjc Injection volume: 201 cm³ Injection pressure: 1230 bar Motor: 15 kW Weight: 5600 kg Height: 2800 mm

Kondisi: bekas, Tahun pembuatan: 2013, 1. Clamping force: 60 tons (600 kN) 2. Injection unit orientation: Vertical 3. Rotary table: Included 4. Screw diameter: Approx. 35 mm 5. Shot size: Approx. 4.4 oz (125 g) Fgodpewp E Hzjfx Airoc 6. Injection pressure: Up to 210 bar 7. Injection speed: Approx. 139 mm/s 8. Mold opening stroke: 305 mm 9. Ejector stroke: 106 mm

Tahun pembuatan: 2012, Kondisi: baik (bekas), Robot 40 RC 200 X = 700mm, Y = tandem 1600mm, Z = 3320mm, B + C servo axes Fedegkvtxepfx Airsgc Year of manufacture: 2012 Price: €8,900 Contact: Mr. Rainer Eckerle

Kondisi: bekas, Tahun pembuatan: 2007, jam operasional: 68.000 h, Fungsionalitas: berfungsi sepenuhnya, gaya penjepit: 600 kN, diameter sekrup: 35 mm, volume langkah: 154 cm³, schlieskraft-600-kn-werkzeugoffnungsweg-335-mm-auswerferhub-105- mm-auswerferkraft-vor-zuruck-19-1-kn-spritzeinheit-schneckendurch messer-35-mm-spritzdruck-1581-bar-hubvolumen-154-ccm-schussgewich t-ps-139-gr-einspritzstrom-151-ccm-s-schneckendrehzahl-400-1-min- duesenanlagekraft-50-3-kn-electrohydraulische-ausruestung-nennlei stung-pumpenmotor-15-kw-masse-und-gewichte-raumbedarf-ca-3-00-x-2 -00-x-3-20-m-gesamtgewicht-6800-kg-zubehoer-schwingelemente-4-fac h-wasserbatterie Fgedpfxox Hxb He Airoc

Kondisi: baru, Tahun pembuatan: 2025, gaya penjepit: 6.500 kN, Perlengkapan: dokumentasi / manual, Spannkraft-650t-Maschine Fgodoza Au Nepfx Airsc

Kondisi: sangat baik (bekas), Tahun pembuatan: 2011, tech-specs-650t-molder Fodpfx Aoy Uffhjiregc

Kondisi: baik (bekas), Carbide reversible knives for wood milling cutters, insert knives, profile cutter inserts - Knife width: 39 mm - Knife thickness: 2 mm - Radius: 7.5 mm - Price: complete - Weight: 0.8 kg Fjdpfx Aeb A Suboiregc

Kondisi: baik (bekas), Tahun pembuatan: 2009, ENGEL EM 440/100T Fgsdpfxsyktp So Airsc

Kondisi: sangat baik (bekas), Tahun pembuatan: 2019, Spannkraft: 650 t Schraubendurchmesser: 60 mm Abstand zwischen den Stützstreben V: 960 mm Abstand zwischen den Stützstangen H: 1100 mm Fsdezaqygepfx Airsgc Schussvolumen: 890 cm³ Typ: Horizontal Antrieb: Hydraulisch

Kondisi: hampir baru (bekas), Tahun pembuatan: 2024, gaya penjepit: 24.000 kN, ENGEL DUO 23060/2400 TECH Manufacturer: ENGEL CLAMPING UNIT Clamping force: 24,000 kN (2,400 t) Opening stroke: 3,200 mm Max. platen daylight: 4,000 mm Min. mould height: 800 mm Max. mould height: 2,000 mm Tie bar distance (H × V): 2,020 × 1,620 mm Platen dimensions (H × V): 2,700 × 2,430 mm Ejector force: 614 kN Ejector force with pressure plate: 1,600 kN Dry cycle time (Euromap 6): 5.4 s INJECTION UNIT Screw diameter: 150 mm L/D ratio: 25:1 Screw stroke: 680 mm Shot volume: 12,020 cm³ Theoretical shot weight (PS): approx. 10.9 kg Injection rate: 2,121 cm³/s Injection pressure (regenerative): 1,601 bar Maximum injection pressure: 1,900 bar Screw speed: 90 rpm Max. screw speed: 115 rpm Screw torque: 18,600 Nm Reduced torque at max. speed: 14,550 Nm Plasticizing capacity (3-zone screw): 235 g/s Plasticizing capacity (barrier screw): 322 g/s NOZZLE Nozzle stroke: 1,100 mm Nozzle contact force: 210 kN EJECTOR Ejector stroke: 400 mm Ejector force forward: 420 kN Ejector force return: 420 kN Fgjdpfx Aiey U Hphorjc HEATING SYSTEM Heating zones incl. nozzle: 10 Installed heating capacity: 97.4 kW DRIVE Installed motor power: 265 kW Hydraulic oil tank capacity: 1,600 l COOLING REQUIREMENTS Cooling capacity: 45.2 kW Water consumption (32 °C inlet): 6.6 m³/h Additional features: Cores: 3+3 Heating zones: 160 Cascade control: 56

Kondisi: sangat baik (bekas), Tahun pembuatan: 2005, Injection moulding machine ENGEL VC1800/400 POWER Basic information Manufacturer: Engel Model: VC1800/400 Power Type: Tie-Bar-Less Hydraulic Injection Moulding Machine Control system: Engel EC100 Year of manufacture: 2005 Operating hours: 110,000 h Country of manufacture: Austria Clamping unit Parameter Value Clamping force 4000 kN (400 tons) Opening stroke 1008 mm Ejector stroke 250 mm Ejector force 96.2 kN Injection unit (current configuration) Screw diameter: 60 mm Parameter Value Screw diameter 60 mm Max. injection volume 764 cm³ Max. shot weight (PS) approx. 695 g Max. screw speed 226 rpm Injection rate 283 cm³/s Injection pressure 1963 bar Max. injection pressure 2361 bar Nozzle stroke 500 mm Nozzle contact force 110 kN Injection unit data taken from the original machine datasheet. Drive Parameter Value Pump motor power 45 kW Mounting platens This machine belongs to the Engel Victory 400T series. Typical platen dimensions for this size are: Parameter Value Fixed platen approx. 1200 × 1100 mm Moving platen approx. 1200 × 1100 mm Max. mould height approx. 300–800 mm Exact transport dimensions: 7.5 × 2.2 × 2.7 m / 20 t. Fedpfxjzb Ivhe Airsgc

Kondisi: sangat baik (bekas), Tahun pembuatan: 2016, Engel e-Motion 740/280 T WP with TecnoMatic Robot / All-Electric Machine / Operating hours: approx. h in automatic mode Year of manufacture: 2016 Injection Unit: Screw diameter: 50 mm Shot weight: approx. 360 g Injection pressure: 1,900 bar Dosage volume: 393 ccm Clamping Unit: Clamping force: 280 t Tie bar spacing: 780x780 mm Platen dimensions: 1,100x1,100 mm Ejector: electric Clamping unit: toggle lever Fgsdpfxey Sl I Rs Airjc Control: CC 300 - Touchscreen Additional equipment: Production line with TecnoMatic robot Machine in very good technical condition All-electric machine: energy-efficient and very quiet Operating hours: approx. in automatic mode Euromap 67 Robot interface Air valve x 5 Hydraulic core pull x 4 Hot runner control x 64 Injection unit is wear-resistant and corrosion-resistant Main motor of the machine - servo motor with inverter drive - energy-saving Central lubrication Parallel movements Automatic mold height adjustment TecnoMatic Medium Robot Year of manufacture: 2020 6-axis robot: all axes driven by servo motors (electric): X, Y-telescopic, Z, A, B, C Touch control panel Robot safety package Robot with adapter, conveyor belt, and protective enclosure Purchase of robot and conveyor belt at extra cost Dimensions: Weight: 17,200 kg Length/Width/Height: 7.37x2.10x2.30 m All machines offered are started up by our service technicians before sale. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2009, Engel e-max 440/180 / Electric Injection Molding Machine Year of manufacture: 2009 Injection Unit: Screw diameter: 40 mm Shot weight: approx. 199 g Injection pressure: 1950 bar Dosage volume: 220 cc Clamping Unit: Fodpfxjy Sl Hts Airogc Clamping force: 180 t Tie bar spacing: 520x520 mm Platen size: 760x775 mm Ejector: electric Clamping unit: toggle lever Control: CC 200 - touchscreen Additional Equipment: Machine in very good technical condition, previously operated in a clean production environment Electric machine: high-speed, energy-saving, and extremely quiet Euromap 67 Robotics interface Air valve x 3 Injection unit hardened - bimetallic Parallel movements Central lubrication Automatic mold height adjustment Kistler sensor - mold pressure control Original mold crane Dimensions: Weight: 7,200 kg Length/Width/Height: 5.87x1.42x2.00 m All machines offered are started up by our service technicians prior to sale. It is possible to receive a video of the technical testing of the selected machine or to participate in live technical demonstrations at our facility in Łódź. Price: On request

Kondisi: sangat baik (bekas), Tahun pembuatan: 2017, Engel Victory 330H/200V/140 Combi Ecodrive / Production Line with Sepro Multi Inject 20 Robot / Operating Hours: approx. 18,000 h in automatic mode Year of manufacture: 2017 Injection Unit: Screw diameter: 30 mm Shot weight: approx. 100 g Injection pressure: 2,400 bar Dosage volume: 113 ccm Clamping Unit: Clamping force: 140 t Tie bar distance: 0 x 0 mm Platen size: 750 x 750 mm Ejector: hydraulic Clamping unit: hydraulic Control system: CC 300 – Touchscreen Additional Equipment: 2K injection molding machine with rotary table and robot Tie-bar-less machine, hybrid: energy efficient, high-speed, and very quiet Very good technical condition Operating hours: approx. 18,000 in automatic mode Total operating hours: 25,369 h Euromap 67 Robot interface Air valve x 8 Fodpfxjy Sl E As Airsgc Hydraulic core pull x 5 Hot runner control x 16 Reinforced injection units – bimetallic Main drives: 2 x servo motors controlled by inverter Proportional valves on the injection units – precise injection Parallel movements Integrated tool pressure control system by Sensor Kistler – measures mold pressure Screw diameter on the vertical injection unit: ⌀25 mm – approx. 58 g/PS Option to purchase the original Foboha rotary table for an additional charge Rotary table diameter: 740 mm Robot Sepro Multi Inject 20 Year of manufacture: 2017 3-axis robot: all axes driven by electric servo motors: X, Y, Z (telescopic) Travel path (approx.): X-4000, Y-1200, Z-1500 Automatic axis lubrication Touch control panel Robot safety package Robot with adapter and safety enclosure Robot purchase available for an additional charge Dimensions: Weight: 10,300 kg Length/Width/Height: 5.56 x 1.76 x 3.46 m All offered machines are started up by our service technicians prior to sale. It is possible to obtain a video of the technical tests of the selected machine or to participate in live technical tests at our company site in Łódź. Price: on request

Kondisi: baik (bekas), Tahun pembuatan: 2016, Ref.-No.: 18657 Manufacturer: ENGEL Model: e-victory 440/160 CC300 ecodrive Hybrid machine Year of manufacture: 2016 Clamping Unit Clamping force: 160 t Opening stroke: 900 mm Mould height min.: 300 mm Mould height max.: 600 mm Platen size (h x v): 750 x 750 mm Injection Unit Screw diameter: 35 mm Shot volume: 168 cm³ Shot weight PS: 151 g Injection pressure: 2400 bar Dimensions and Weights Dimensions L x W x H: 5.7 x 1.8 x 2.2 m Machine weight: 10,200 kg Additional Information: Tie-bar-less design + electric injection unit = maximum flexibility and precision ENGEL e-victory 440/160: This is a hybrid machine (servo-hydraulic + electric) Fsdpey Ipgpsfx Airsgc Functionality Electric section: * Injection unit (screw movement) * Provides very high precision and process stability ✔ Hydraulic section: * Clamping unit (mould closing) * Maintains pressure energy-efficiently without additional energy consumption This system combines: * The precision of an electric machine * With the power and efficiency of a hydraulic unit This is a modern, servo-hydraulic injection moulding machine from ENGEL's proven e-victory series. This line is renowned for its energy-efficient drive technology, high precision, and space-saving tie-bar-less construction. The machine features a clamping force of 160 tons and is ideally suited for technical plastic parts as well as demanding applications in fields such as automotive, medical technology, and industry. Key features: * Tie-bar-less design for maximum mould flexibility * Servo-hydraulic drive for high energy efficiency * Precise and stable process control * Compact construction with a large mounting area * Modern ENGEL control system The machine is from 2016 and is in excellent optical and technical condition, as shown in the pictures. Thanks to its tie-bar-less design, this machine offers clear advantages for large or complex moulds and enables highly flexible production.

Kondisi: bekas, Tahun pembuatan: 2015, Lot terdiri dari: (1) Mesin injeksi plastik, Penanganan: Sepro Robotique | SR SUCCESS11 S3 Trans | 2014 Kontrol suhu: HB Therm | Lain-lain: 1x Pelindung Keselamatan 1x Sistem Penanganan 1x Konveyor Rincian teknis: Langkah maksimum (mm): 175,0 Sistem pengukuran: enkoder inkremental Sistem penjepit: Toggle (KH) Gaya penjepit (kN): 1000 Servo injeksi: Tidak Diameter screw (mm): 40,0 Kecepatan screw (rpm): 420 Zona pemanas: 4 Daya pemanas zona 1 (kW): 4,23 Fsdpfxjy N R N Ue Airsgc Daya pemanas zona 2 (kW): 3,00 Daya pemanas zona 3 (kW): 3,00 Daya pemanas zona 4 (kW): 3,00 Kontrol suhu: Termokopel tipe J Tipe sensor tekanan: Diafragma