Beli Erregi Pres (Untuk Rangka Mebel) bekas (33.963)

Kondisi: sangat baik (bekas), Mesin press berjalan (press kabinet) Sistem tekanan elektro-mekanis Sistem self-centering Belt transportasi dan perakitan termotorisasi (melalui mesin press) mm 4500 Kecepatan maju (dapat diatur) m/menit 10-40 Panjang total mesin (mm) 4400 UKURAN FURNITURE KABINET Panjang minimal furniture kabinet (mm) 250 Panjang maksimal furniture kabinet (mm) 2500 Dcedpfx Aioyzh I Sjujh Kedalaman (lebar) minimal furniture kabinet (mm) 250 Kedalaman (lebar) maksimal furniture kabinet (mm) 700 Tinggi minimal furniture kabinet (mm) 250 Tinggi maksimal furniture kabinet (mm) 1200 Kontrol PLC "OMRON" Total daya terpasang (kW) 8,8

Kondisi: sangat baik (bekas), Tahun pembuatan: 1985, Fungsionalitas: berfungsi sepenuhnya, Mesin dalam kondisi kerja penuh dan dalam keadaan baik. Dimensi kerja: 3200 x 2200 mm Pengaturan dimensi dikontrol secara elektrik dari panel kontrol. Djdpfjxmr Rxox Aiuech Ditenagai oleh unit hidrolik.

Tahun pembuatan: 2021, jam operasional: 2.400 h, Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: LM68, Dijual: mesin press untuk memproduksi rangka atap baja truss merek Belgia Stavelse Metaalbouw. Paket meliputi: - Mesin press dengan tekanan hingga 50 ton - Meja perakitan elemen dengan total ukuran 4,5 x 39 m - Dua tempat parkir - Sistem laser SL-LASER - Mesin penata rangka Djdpfxexzpn Re Aiujch - Printer label Mesin tahun 2021, sepenuhnya otomatis, sangat jarang digunakan.

Kondisi: sangat baik (bekas), Tahun pembuatan: 1998, Frame dowel and slot mortising machine by Hofmann HT 200 U with angle adjustment Special drilling machine for staircase construction, window manufacturing, and universal applications thanks to pneumatic height adjustment. Angled doweling and baluster drilling are easily achievable due to the swiveling drilling unit. - Two-speed switchable motor - Motor power 1.5 / 1.8 kW, 1400 / 2800 rpm - Motor start via convenient handle switch - Precision chuck with two inserts: 16mm and M10 thread - Table size approx. 1100 x 240 mm - Linear laser for precise workpiece positioning - Drilling unit can be swiveled 65° to both left and right Dcjdeyfta Tjpfx Aiujh - Pneumatic adjustment of working height, doweling on two levels without resetting - Desired drilling heights can be set for each drilling level using handwheel and digital counter, switching is then done pneumatically at the front - Cross adjustment approx. 320 mm, stepless or in 12 mm increments - Drilling stroke approx. 200 mm - 2 pneumatic workpiece clamps, placeable at the front and rear of the table - 2 swiveling workpiece supports - 2 side stops, can also be used as front stops - Mobility kit - Extraction port 80 mm - 4 used but good drill bits: 9, 12, 16, 19 mm A few paint touch-ups, otherwise in very good condition – see original photos. A used swiveling slot mortising machine in this condition is very rarely available. CE marked Operating manual included Dimensions approx. 1200 x 1200 x 1200 mm (LxWxH), weight 310 kg. Inspection and demonstration on site possible by prior arrangement. We only offer machines that are ready for demonstration in our warehouse, see "further offers from this seller".

Kondisi: bekas, Condition: NEW with pneumatic clamping device. The universally applicable assembly station for the production of wall, ceiling, and roof elements in timber frame construction. - Heavy-duty base frame construction for a level working surface. Dcedpfx Aijwv Tqboujh - Clamping of elements via 9 system clamping beams with pneumatic cylinders. The clamping beams are extendable for element heights from 100 to 3,800 mm. Cylinder stroke is 320 mm, clamping force per cylinder approx. 420 kg / 4,200 N at 10 bar operating pressure. The clamping system can be operated in two groups (5 and 4 beams), allowing two elements to be clamped/processed simultaneously. - Working surface sheathed with timber panels as far as technically possible. (Optionally available: perforated metal plate as shown in the photo) - Stop system at the bottom with 9 locating pins and at the side with 7 locating pins for precise element positioning. - Tilting device for the assembly station with 3 hydraulic cylinders for element weights of up to 4,000 kg at 85° (95°). The hydraulic system is compactly integrated in the frame area of the assembly station. - The electrical control cabinet is also protected and installed underneath the assembly station. - Operation of the functions is performed via a pendant control. - At both ends of the station, one compressed air connection and one socket are installed; on the longitudinal side of the station, there are two sockets and two compressed air connections for connecting hand tools. - The stations are modular in design, allowing them to be expanded immediately or at a later date with a receiver station to form a complete tilting station. A tilting station can be seen in picture 3. - Further options: assembly table without tilting function, perforated metal plates, other working dimensions on request. Working area: - Maximum element size (W x H): 12,000 x 3,800 mm - Minimum element size (W x H): 1,000 x 100 mm - Cylinder stroke of clamping cylinders: 320 mm - Locating pin height: 120 mm - Working height: approx. 700 mm - Colour RAL 7035 light grey

Tahun pembuatan: 2019, Kondisi: bekas, Rangka transportasi bekas MMW LIMITED Model ST2201-5-3 Maks 5400kg Dcodpfxjy Nkkls Aiujh Rangka 'A' untuk kaca jendela MMW Ltd ST2201-5-3, kapasitas angkut 5300KG

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: FN744944, Tahun pembuatan: 2025, jam operasional: 15 h, kapasitas angkut: 2.000 kg, tinggi angkat: 3.000 mm, pengangkatan bebas: 150 mm, pusat beban: 500 mm, jenis bahan bakar: listrik, Jungheinrich forklift tahun 2025 dengan hanya 15 jam operasi! DETAIL TEKNIS Dcedpoy Nc Rwefx Aiush Kapasitas angkat: 2.000 kg Tinggi angkat: 3.000 mm Lift bebas: 150 mm Titik berat beban: 500 mm Panjang garpu: 1.200 mm DETAIL MESIN Jenis bahan bakar: listrik Jenis tiang: Duplex Daya: 9 kW Kapasitas baterai: 750 Ah Kapasitas baterai tersisa: 100 % Tegangan baterai: 48 V Kondisi ban: 100 % Berat sendiri tanpa baterai: 2.350 kg Berat baterai: 962 kg hingga 1.094 kg Jam operasi: 15 jam PERLENGKAPAN Pencahayaan Hidrolik penjepit Gigi palet Sampingan Rotator garpu (180 derajat)

Tahun pembuatan: 2026, Kondisi: hampir baru (bekas), Rangka pengosongan BigBag Dodpfjy Rfbhsx Aiusch Penopang atas untuk traves Traves untuk forklift / derek

Kondisi: bekas, Rak rakit baja bekas 1550x1200x300 mm, cocok untuk tiang 60,3 mm. Rak rakit baja adalah solusi untuk siapa saja yang mencari fleksibilitas dan efisiensi maksimum dalam pergudangan. Dirancang untuk penyimpanan europallet yang efisien dan aman. Dcjdpjy Hpzqofx Aiujh Berkat konstruksi kokoh dari baja galvanis panas...

Kondisi: baik (bekas), Tahun pembuatan: 1998, Universally applicable frame dowel and slot drilling machine with adjustable angle Specifically designed for staircase and window construction as well as universal applications thanks to pneumatically adjustable height. Angled dowel and baluster drilling is easily achieved using the pivoting drilling unit. - Motor with pole reversal, two speeds - Motor power: 1.0 / 1.5 kW, 1400 and 2800 rpm - Motor started via ergonomic handle switch - Equipped with Röhm two-jaw chuck, 1 - 20 mm - Linear laser for precise workpiece positioning - Drilling unit can pivot 65° left and right - Pneumatic height adjustment allows doweling at two levels without resetting - Desired drilling heights for each drilling level can be set via digital counter, switched pneumatically from the front - Cross adjustment 340 mm, stepless or in 12 mm increments, with indexing rail - Pneumatic clamping possible at any position, operated from the front - Maximum height adjustment approx. 100 mm above table height - Drilling stroke approx. 200 mm - 2 pneumatic workpiece clamps, 1 clamp column can be moved to the front - 2 swiveling workpiece supports - Extraction funnel - Center stop + 1 side stop - Fixed mitre stop - Length stop as round bar - Assorted drill bits - Operating manual - CE mark - Machine was partially repainted due to paint splatters - Pneumatic hoses have been replaced Dimensions approx. 1200 x 1350 x 1600 mm (LxWxH), weight 380 kg. The machine can be demonstrated at our facility by appointment. We only offer machines that are ready for demonstration in our warehouse; see ‘more offers from this supplier.’ Dodpsxmatnefx Aiusch

Kondisi: bekas, Flatbed Die Cutter - Swing-Frame Die Cutter - Flatbed Press - Platen Press - Eccentric Press Die cutter + feeder for use with strip steel rule die cutting tools Flatbed Die Cutter HELMERDING Type PSH 25 Order No. EP 97784 Machine No. 6073 Year of manufacture 1998 Press force 25 tons Clearance between tie rods 700 mm Table area = installation space 800 x 670 mm Table area = mounting frame width 510 x depth 440 mm, plate thickness 20 mm Ram area 800 x 670 mm Drop-through hole in table 490 x 420 mm Ram stroke 45 mm Adjustable ram travel 10 mm Installation height = tool height 100 mm Stroke rate up to 250 strokes/min. Motor power 15 kW Power supply 400 Volt, 50 Hz - regulated drive for stepless stroke rate adjustment - pneumatic clutch-brake combination - ram balance cylinder - automatic central lubrication VOGEL Dcedpsdzqmzsfx Aiujh - solid base plate with 4 vibration-damping elements under the machine Space requirement (L x W x H) approx. 3000 x 2000 x 3000 mm Weight 4.5 tons Good condition Previously, the machine was used for punching cardboard blanks. Ideal for punching nonwoven materials or similar, e.g. for respirator masks.

Kondisi: bekas, Single-column Hydraulic Press HYDRAP Type HPSK 25 Serial No. 6312 Year of manufacture: 1989 Pressing force: 25 tons Ram stroke: 500 mm Throat depth: 300 mm Installation height: 700 mm Table size: 1000 x 500 mm Table bore: Ø 210 mm Dedpshrakvefx Aiusch Ram area: 400 x 360 mm Clamping bore: Ø 40 mm Table height above floor: 855 mm Rapid advance speed: 280 mm/sec Pressing speed: 3.5 mm/sec up to 25 mm/sec Return speed: 280 mm/sec Hydraulic tank capacity: 240 liters Drive power: 7.5 kW Electrical connection: 400 Volt, 50 Hz - Operation and programming via SIEMENS S5 with OP1 controller - Measurement system for stroke adjustment - Pressing speed steplessly adjustable via potentiometer - Pressure steplessly adjustable via manual pressure regulator - Short-stroke device - Mechanical tool clamping on ram with T-slots and clamping pin bore - Control cabinet with electrical control mounted on the machine - Two-hand operation and electrical connection for foot switch - Control unit prepared for electrical tool monitoring - Hydraulic and electrical schematics available Space requirement (L x W x H): 1800 x 1200 x 2930 mm Weight: approx. 4 tons Good condition

Kondisi: bekas, Battery change frame, transport rack, storage rack for forklift batteries Change table, battery pallet, battery changing system, battery change cart Manufacturer: WELUX 2.5 Model: WS2-RR-2-300 Load capacity: 2 x 500 kg per compartment = 1000 kg Compartment dimensions per slot (W x D): 300 x 920 mm Compartment dimensions without center bar (W x D): 655 x 920 mm Height adjustment: 80 to 200 mm - Removable center bar - Also suitable for sheet materials Dcedefgpfpspfx Aiujh - 16 galvanized steel rollers Ø 50 mm - 4 fixed castors Ø 100 mm, 2 swiveling with brake - Fixed castors individually height-adjustable via threaded rods Overall dimensions (L x W x H): 1050 x 950 x 615 mm Net weight: 85 kg Good condition.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1996, Fungsionalitas: berfungsi sepenuhnya, Drilling and handle milling machine HESS. Single-spindle, equipped with pneumatic clamps. Suitable for PVC and aluminum windows. Djdev H E Aljpfx Aiujch

Kondisi: baik (bekas), Paket pengiriman meliputi: 01x pelindung tiang, bekas Warna material: kuning – dicat Dcedpfx Asw Ngzfjiujh Tinggi total: 1.190 mm Lebar total: 122 mm Lebar dalam: 110 mm Cocok untuk profil rangka: 110 mm Kedalaman total: sekitar 60 mm Ketebalan material: 6,00 mm Diameter lubang bor: 13 mm Jarak antar lubang bor: 650 mm Berat | per pcs: sekitar 12,69 kg Jumlah lubang bor: 02 pcs Termasuk material pemasangan yang terdiri dari: 02x baut hex M10x35 mm 02x mur hex M10 04x ring M10 Informasi umum mengenai produk: Produk ini hanya tersedia untuk pengambilan langsung. Permintaan pengiriman atau transportasi produk ini dapat dilakukan dengan biaya tambahan yang dapat ditanyakan secara terpisah tergantung lokasi pengiriman dan jumlah pesanan.

Kondisi: hampir baru (bekas), lieferumfang_ständerschützer_DE_EN Dodow I Dmpopfx Aiujch

Kondisi: baik (bekas), Stub shaft for friction wheel, running wheel, bridge crane, overhead crane, assembly crane, flange hub, gear stub shaft, coupling, power coupling, gear coupling, transmission coupling -Manufacturer: Konecranes, Stub shaft (gear stub shaft) for crane chassis -Type: Unfortunately without type designation, suitable for gearbox ID 34705 / ID 34752 -Shaft: Ø 70 x 150 mm -Bolt circle: Ø 422 x 25 mm -Dimensions: see photos -Quantity: 2 units available -Price: per unit -Overall dimensions: Ø 480 x 280 mm Dodpfx Aiev Hmncousch -Weight: 83 kg/unit

Tahun pembuatan: 2024, Kondisi: sangat baik (bekas), driveshaft for hollow shaft, friction wheel, running wheel, bridge crane, indoor crane, assembly crane, flange hub, gearbox drive shaft, drive shaft, coupling, power coupling, gear coupling, gearbox coupling Dodpfx Aisv Hmf Ijusch - Manufacturer: Konecranes, drive shaft / gearbox drive shaft: for crane chassis - Type: 4700419300, suitable for gearbox ID 34705 / ID 34752 - Shaft: Ø 160 x 600 mm - Keyway width: 40 mm - Dimensions: see photos - Quantity: 2 pieces available - Price: per piece - Dimensions: Ø 480 x 735 mm - Weight: 173 kg/piece

Kondisi: bekas, Chassis dengan penggerak roda gesek untuk sistem derek ringan DEMAG Cocok untuk rel derek dari profil sistem tipe KBK 2 dan KBK II L Tipe: DRF 200-B14-1-43 No. Fabrikasi: 45950995 Kecepatan berjalan: sekitar 40 m/menit = 0,67 m/dtk Daya motor: 0,37 kW Sambungan listrik: 400 Volt, 50 Hz. - Motor penggerak DEMAG, Tipe ZBA 71 A2 B007 Trolley KBK 2 / KBK2L untuk digantung di rel derek Diameter roda jalan: 82 mm Lebar roda jalan: 21 mm Dodpfxew Nxyyj Aiusch Lebar trolley: 78 mm Dimensi L x W x H: 410 x 320 x 470 mm Berat: 28 kg dalam kondisi baik

Kondisi: bekas, Electric trolley, electric travel carriage for chain hoist, crane trolley, running gear, rolling trolley For double T-beam steel type GU-A035400 . 0104671 Year of manufacture: 1986 Load capacity approx. 1100 kg Dedpfxol Ab Rts Aiuoch Roller diameter approx. 80 mm Track width from 65 mm to 110 mm Travel speed 12.5 m/min Motor output 0.42 kW Power supply 380 Volt, 50 Hz Weight 20 kg Good condition

Kondisi: baik (bekas), ZIM Hülsta Korpuspresse NOW Easy Pabrikan: ZIM Hülsta-Werke Dcjdpfxjvdbv Aj Aiujh Tipe: NOW Easy Seri No.: 380125028 Dimensi korpus maksimum: 260 x 1100 mm 2 dudukan bawah, dapat digeser 2 balok tekan atas, dapat digeser Panel kontrol Beckoff Konveyor rol: 4500 x 600 mm Lebar rol: 500 mm Dimensi keseluruhan: P x L x T 3300 x 1800 x 3600 mm Pembiayaan melalui bank kami juga dimungkinkan. komplett-konzept.leasingo.de Berbagai barang baru dan bekas dapat ditemukan di toko kami! Biaya pengiriman internasional sesuai permintaan!

Tahun pembuatan: 2001, Kondisi: sangat baik (bekas), I am offering for sale a Biesse production line consisting of: - COMIL Insider dowel insertion machine - Drilling, grooving, dowel insertion, glue application, accessory insertion units - Complete line Year of manufacture: 1999-2001. It is possible to sell the machines separately. Vibration feeders and motorised conveyors are included in the offer. For more photos and details, please send an enquiry. Djdpsd Iv H Refx Aiujch

Kondisi: bekas, Mesin Press Laci ZVB/ZUB Ukuran (PxLxT): sekitar 250x200x100 cm, dengan 3 batang tekan, 2 di antaranya dapat digerakkan secara elektrik, lemari kontrol, terminal pengoperasian, 1 perangkat pemberi lem KUPER, 1 unit bor, Dcodpex Dkygofx Aiush

Kondisi: siap digunakan (bekas), Fungsionalitas: berfungsi sepenuhnya, jarak tempuh: 650.000 km, daya: 110,32 kW (149,99 hp), jenis bahan bakar: diesel, berat keseluruhan: 7.500 kg, konfigurasi gandar: 4x2, tipe perpindahan gigi: mekanis, lebar ruang muat: 4.000 mm, Tahun pembuatan: 2010, Perlengkapan: ABS, kunci sentral, pendaftaran truk, pendingin udara,

Kondisi: bekas, Tahun pembuatan: 2000, Complete manufacturing line for the production of slatted bed bases. From wood processing to final assembly/packaging. Includes all components such as milling machines, saws, profile processing, forklifts, compressors, etc. The larger machines/systems are from approximately the year 2000. Consisting of: Solid Wood Side Rail Production - 2 x Multi-blade Saw RAIMANN KR 450 + KS 310 - Optimizing Cut-off Saw GRECON ILLERTISSEN OPTICUT 704R - Four-Sided Planer WEINIG HYDROMAT 23 Dedpfx Aiox S Sb Djuoch - Stacking Unit Foiling / Finishing of Longitudinal Rails: - 2 x Profile Wrapping Machine FRIZ OPTIMA PU25-PAP - Film Slitting Machine FRIZ FSM 1500 CNC Drilling and Sawing Units - KOCH Drilling and Sawing Unit, with Turning and Stacking Unit - ISE CNC Drilling and Sawing Unit with Stacking Unit - 2 x ISE CNC Woodworking Center / Drilling Units - ISE CNC Slat Milling Machine - 2 x Manual Slat Drilling Machines Individual Machines - GANNOmat CNC Drilling and Dowel Inserting Machine - Pnahans Spindle Moulder - 2 x EiMa Double-Headed Saws - SCM Panel Saw - Barth Frame Press - 2 x FLOTT Column Drilling Machine - SAMCO Combination Saw-Milling Machine - 2 x Multi-Spindle Drilling Machine - 2 x Belt Sanders - Paint Booth - Various Small Machines Assembly - Automatic Assembler for Standard Slatted Frames - Press-In Machine / Capping Line - 14 x Pneumatic Assembly Tables Logistics – Factory Equipment - 3 x LINDE Forklift Trucks E16 / E20 - 7 x LINDE High-Lift Trucks / Electric Pallet Stackers - WEYCOR Wheel Loader 95E SUPER - Atlas-Copco Compressor System - WEIMA Single-Shaft Shredder - Kärcher Ride-On Sweeper - HONDA Snow Blower - Outdoor Extraction System - Batch of Mesh Containers + Euro Pallets - Various Rack Systems Packaging - Shrink Tunnel System - Stationary Pallet Wrapper - Mobile Pallet Wrapper Materials - Remaining stock of wood / spring slats - Remaining stock of end caps / plastic parts - Remaining stock of various assembly materials Many more PHOTOS and detailed DATA available upon request.