Beli Fendt Belastungsgewicht 1800 Kg bekas (67.306)

Kondisi: bekas, Tahun pembuatan: 2023,

Kondisi: bekas, Tahun pembuatan: 2023,

Kondisi: bekas, Tahun pembuatan: 2024,

Tahun pembuatan: 2006, Kondisi: sangat baik (bekas), 1 used rapid steam generator ----- Manufacturer: CERTUSS Model: Universal Steam Output: 1,800 kg/h Maximum Thermal Output: 1,311 kW Operating Overpressure: 16 bar Test Pressure: 57 bar Water Content approx.: 218 l Heating Surface: 23.7 m² CE Mark: CE 0035 Year of Manufacture: 2006 Equipped with Certuss gas burner, gas control section, control cabinet mounted on boiler body, and the existing coarse and fine fittings. Djdpfx Aoikvdqoaqjut Including feed water module, mounted on base frame, comprising: control cabinet, stainless steel feed water tank, Speck feed water pump, dosing tank, blowdown tank

Kondisi: bekas, Tahun pembuatan: 1998, jam operasional: 8.240 h, tinggi angkat: 5.550 mm, jenis bahan bakar: listrik, tipe tiang: triplex, tegangan baterai: 48 V, panjang garpu: 1.200 mm, Unladen weight: 3,600 kg Lifting capacity: 1,800 kg Number of valves: 3 Overall condition: average Duodpfx Aasv D Eruoqot Technical condition: average Visual condition: average Please contact Bas Sindorf for further information.

Tahun pembuatan: 2026, Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, panjang total: 1.500 mm, kapasitas angkut: 18.000 kg, Tragedorn Duodpfxoycm Hbs Aaqot Titik berat beban: 1200 Kelas ISO: Terminal West Kondisi: Seperti baru Kondisi Teknis: Baru Deskripsi: Diameter 254mm untuk penanganan gulungan baja

Tahun pembuatan: 2026, Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, panjang total: 1.500 mm, kapasitas angkut: 18.000 kg, Pin Angkat Titik berat beban: 1200 Kelas ISO: Terminal West Kondisi: Seperti baru Kondisi Teknis: Baru Deskripsi: Diameter 254 mm untuk penanganan coil baja Djdeycm E Ropfx Aaqsut

Tahun pembuatan: 2021, Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, 01501de1 Dodpfx Aey Iyvnjaqsut

Kondisi: sangat baik (bekas), Dijual hoist rantai listrik merek terkenal Yale model CPVF 10-8 NE. Duodeyrh I Eepfx Aaqot Perangkat dalam kondisi teknis sangat baik, dilengkapi dengan sistem kendali radio Magnetek (remote + receiver). Spesifikasi teknis: • Model: CPVF 10-8 NE • Kapasitas angkat: 1000 kg • Tahun produksi: 2019 • Daya: 400V / 3 fase • Kecepatan pengangkatan: 2 / 8 m/menit • Pengendalian: remote radio • Kondisi: sangat baik, jejak pemakaian normal

Kondisi: sangat baik (bekas), Essential information: Type: scissor lift / lifting table Load capacity: 500 kg Condition: used – fully functional Control: remote up/down + EMERGENCY STOP Power supply: 230/400V Year of manufacture: 2012 Price includes: complete set as shown in the photos ⚙️ Technical specifications: Load capacity: 0.5 t (500 kg) Dusdjyw Ua Tepfx Aaqjt Lifting height: approx. 630 mm Motor power: 0.8 kW Operating pressure: 196 bar Weight: approx. 170 kg Table dimensions: approx. 90 x 60 cm Power supply: 3-phase 230/400V Protection class: IP55 🛠️ Description: I am offering a professional hydraulic scissor lift – ideal for workshops, production facilities, and warehouses. The device allows for safe and convenient lifting of heavy components to an ergonomic working height. Equipped with: - sturdy scissor construction - hydraulic lifting system - remote control operation (up/down + emergency STOP) Perfect for: - assembly work - packing - service and production - loading and unloading 📦 Set includes: Scissor lift Hydraulic power unit Remote control 🚚 Shipping: Shipped on a pallet Personal collection possible

Tahun pembuatan: 2015, Kondisi: bekas, Netralisasi limbah cair Kapasitas: 8 m3/jam Pengoperasian / Pengendalian: Panel kontrol dengan layar sentuh / WAGO Perlengkapan: Tangki netralisasi (37 hl); Tangki kontrol akhir (4,5 hl); Tangki alkali; Tangki asam; Pompa; Teknologi pengukuran, sensor dan kontrol; Panel kontrol Duedpfexbqr Dox Aaqet

Kondisi: bekas, Tahun pembuatan: 1991, Consisting of: - SIGMATHERM plate heat exchanger (heat exchange surface 21.5 m²) - Feed tank 1,200 l - Hilge product pump with manual control valve - Hilge hot water circulation pump - 500 l expansion tank - Shell-and-tube heat exchanger - Compressed air reducing station - Control cabinet with operator panel Machine (addition): Juice heating plant for pasteurisation Capacity: 100 hl/h Perm. operating overpressure PHE: 16 bar, test pressure 20.8 bar Duodevcqy Ujpfx Aaqjt Heat exchange surface: 21 m² Length: 5.6 m Width: 2 m Height: 2.4 m Operation/control: Control cabinet with operation buttons Material: Stainless steel Base construction: Frame Equipment: 2 x tanks; plate heat exchanger; shell-and-tube heat exchanger; 2 x product pumps; measuring, sensor and control technology; various valves and other fittings.

Kondisi: hampir baru (bekas), Konstruksi baja – 2,50 PLN per kg Dusdpfxey H Eu Ts Aaqot

Kondisi: sangat baik (bekas), Tahun pembuatan: 2011, Fungsionalitas: berfungsi sepenuhnya, daya: 9,7 kW (13,19 hp), en-001 Duodpfxju Tha Ie Aaqet

Kondisi: baik (bekas), Tahun pembuatan: 2010, jam operasional: 3.641 h, Fungsionalitas: berfungsi sepenuhnya, gaya penekanan: 36 t, lebar bukaan pengisian: 1.100 mm, panjang bukaan pengisian: 1.080 mm, lebar bal: 1.100 mm, tinggi bal: 750 mm, daya: 15 kW (20,39 hp), laju aliran volumetrik: 90 m³/jam, Technical Data – Baler: Manufacturer: Presto GmbH & Co. KG Model: CC 36 M Year of manufacture: 2010 Operating hours: 3,641 hours Dedpfxou Thh Es Aaqsut Main press force: 36 t Specific pressing force: 467 N/cm² Feed opening dimensions: 1,080 x 1,100 mm (L x W) Cycle time: 34 seconds Filling volume per cycle: 0.85 m³ Theoretical throughput: 90 m³/hour Throughput under operating conditions with a material bulk density of 35 kg/m³: approx. 51 m³/hour Bale dimensions: 1,100 x 750 mm (W x H), length variable Drive power: 15 kW Tying: 4-fold vertical, semi-automatic, with polyester twine Throughput rates at a bulk density of: – 35 kg/m³: 1.8 t/hour – 60 kg/m³: 2.5 t/hour – 100 kg/m³: 3.1 t/hour Transport dimensions (baler only): 4,200 x 1,640 x 2,200 mm (L x W x H) Machine weight (baler): approx. 4 t Notes: The baler has been function-tested in our workshop, subsequently stored, and is therefore available at short notice. Full machine documentation (operating manual, CE declaration, electrical and hydraulic schematics) is available. Viewing by appointment possible. No liability is accepted for the accuracy of the technical specifications or any possible errors.

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2009, jam operasional: 22.029 h, Fungsionalitas: berfungsi sepenuhnya, gaya penekanan: 80 t, lebar bukaan pengisian: 1.000 mm, panjang bukaan pengisian: 1.400 mm, lebar bal: 1.100 mm, tinggi bal: 750 mm, berat bal: 600 kg, berat keseluruhan: 16.000 kg, daya: 45 kW (61,18 hp), tahun perombakan terakhir: 2025, Technical data of the baler: Manufacturer: Avermann Maschinenfabrik GmbH & Co. KG, Germany Model: AVOS 1410-45/80 Year of manufacture: 2009 Operating hours: 22,029 h (as of December 2025) Pressing force: 80 kN Specific pressing force: 103.9 N/cm² Feed opening dimensions: 1,400 x 1,000 mm Theoretical cycle time: 12 seconds Theoretical throughput: 300 m³/hour Bale dimensions: 1,100 x 750 mm (W x H), length variable Drive power: 45 kW Total connected load: 75 kW Tying: 4-fold vertical, fully automatic Throughput rates at a bulk density of: - 30 kg/m³: approx. 6.0 t/h - 50 kg/m³: approx. 10.5 t/h - 100 kg/m³: approx. 17.5 t/h Bale weights at a bale length of approx. 1.2 m: up to 600 kg, depending on material PLC control: Siemens S7-300 Display panel: pulsotronic Baler dimensions (assembled): 8,610 x 2,400 x 3,835 mm (L x W x H) Transport weight (baler): 16 t Special equipment: - Wear-resistant base made of HARDOX steel - Special press ram for compacting "difficult" materials and loose bulk goods of small grain size Dedpjx A U Ncefx Aaqout - Control cabinet air conditioning - Machine stand increased by 200 mm Remarks: The machine has been serviced and partially overhauled in our workshop. The following work has been carried out and parts replaced: • Dismantling of the press ram, disassembly into individual components, servicing of the mechanics, replacement of the following plastic wear rails and plates: o Plastic wear rails left/right under the press ram o Plastic wear rails left/right above the press ram o Main plastic wear plate (support plate) centrally under the press ram • Replacement of steel guide rails left/right at the top of the frame • Replacement of the complete base plate, four-part, made of wear-resistant HARDOX steel • Wire feed rails in the press base newly welded and smoothed • Replacement of the counter knife, two-part, in the frame • Adjustment of the knife clearance to approx. 2.5 mm • Dismantling of tying and twisting unit, disassembly into individual components, servicing of the mechanics, replacement of all deep groove ball bearings and axial bearings on the twisting shafts, cleaning and adjustment of the wire knives, chains greased and tensioned • Support roller in front of twisting shafts renewed • All hydraulic hoses replaced • Oil filter and air filter replaced • Main hydraulic cylinder checked for tightness • Hydraulic oil is only one year old, was chemically analyzed, is still in good condition and was therefore not changed, but can continue to be used • General maintenance carried out Finally, the baler was subjected to a machine test in manual and automatic mode, see video for machine function test.

Kondisi: bekas, Tahun pembuatan: 2015, jam operasional: 1.800 h, daya: 99 kW (134,60 hp), Perlengkapan: kabin, pendingin udara, penggerak semua roda,

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2016, jam operasional: 2.626 h, daya: 282 kW (383,41 hp), panjang total: 5.274 mm, berat kosong: 9.450 kg, kapasitas angkut: 4.770 kg, lebar konstruksi: 2.620 mm, Traktor Dedpfsumvh Ijx Aaqeut Kelas kecepatan: 50 Kondisi teknis: sangat baik Kondisi baterai: sangat baik

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2017, jam operasional: 8.310 h, tinggi konstruksi: 3.270 mm, berat kosong: 9.450 kg, panjang total: 5.274 mm, lebar konstruksi: 2.620 mm, Traktor Kelas kecepatan: 50 Kondisi teknis: baik Djdpjwlxgmofx Aaqout Kondisi baterai: baik

Kondisi: diremajakan ulang (bekas), Gebrauchte K+G Wetter WW 130 mm Winkelwolf – ein zuverlässiges und langlebiges Gerät für das Zerkleinern von frischen sowie leicht angefrorenen Produkten. Ideal geeignet für kleine und mittelständische Produktionsbetriebe. Komplett aus Edelstahl gefertigt, gewährleistet es höchste Hygiene am Arbeitsplatz sowie einfache Wartung. Ausgestattet mit zwei Geschwindigkeiten: 11/19 kW. Plattensätze mit Lochungen: 2, 3, 5, 8, 10, 12 mm Hersteller: K+G Wetter Dusdpfx Ajk Tzwlsaqjt Modell: WW 130 Höhe: 1950 mm Breite: 1400 mm Länge: 1500 mm Gewicht: 800 kg Behältervolumen: 185 l Elektrischer Anschluss: 400V 50Hz 3N Gesamtleistung: 11/19 kW Einfüllöffnung: 130 mm

Kondisi: sangat baik (bekas), pl-hu-001 Dsdpfoy A Tgcjx Aaqout

Kondisi: hampir baru (bekas), Telah direkondisi secara menyeluruh Harga: 5.500 EUR Mixer adonan spiral Kapasitas: 100 kg tepung 160/180 kg adonan Diosna Volume wadah: 260 liter Daya listrik: 380V / 50Hz / 3N/PE Dua timer Dua kecepatan Opsi mundur Duodpfx Aajx N Ed Tjqot Tutup setengah dengan saklar pengaman Roda dengan rem

Kondisi: hampir baru (bekas), Mesin yang telah direkondisi secara menyeluruh Duodpfxsx N Efqe Aaqet Harga: 4.500 EUR Mixer adonan Dengan paddle Kemper Mesin memiliki 2 kecepatan Bowl dan mixer terbuat dari stainless steel Unit bergerak di atas roda Timer otomatis Kapasitas: 180 liter / 120 kg adonan atau 75 kg tepung

Kondisi: bekas, Tahun pembuatan: 2015, jam operasional: 6.295 h, Output: Power: 211 kW (287 hp) For further information, please contact Emal Jaweed. Tractor, Fendt, 842 Vario, 4x4, Power: 211 kW, Operating hours: 6295, front axle suspension, cab suspension, compressed air system, dual-circuit, automatic air conditioning, hydraulic top link rear, ball hitch, automatic trailer coupling, front linkage, hydraulic top link, front PTO. Other features: * Over 200 units available for sale. Dsdpfsyn Ndyjx Aaqsut * Our location is 30 km north of Frankfurt/Main Airport. * Financing & leasing options available. * Specialist in worldwide transport and shipping. * No liability for printing or typing errors. * Subject to prior sale and errors. * Trade-ins welcome! * Purchases and sales of used machinery are subject exclusively to the General Terms and Conditions (GTC) of Jaweed GmbH. * For further information and our GTC, please visit our website.

Kondisi: baru, Tahun pembuatan: 2026, THE COST-EFFECTIVE TUBE BENDING MACHINE FOR TIGHT BEND RADII: This bending machine, equipped with a free-standing bending head, can be easily converted for right- or left-handed bending, making it ideal for handling complex geometries. The plug-in bending tools allow for quick changeovers to accommodate different tube diameters. A high-speed hydraulic system reduces non-productive times—an essential factor for series production. Clamping pressure for tube holding can be optimally adjusted. The PLC control system (expandable via USB stick) with data storage and the latest X2X interface can store an almost unlimited number of programs for bend angles, lengths, and rotation angles for up to 50 bends per tube length. A freely programmable database for up to 200 materials is available for monitoring springback values. The machine features two operating modes: In "Simple Bending," the length and rotation of the bends relative to each other are displayed automatically. In "Controlled Bending" mode, the bending data is preset, and a continuous target/actual comparison is performed during bending. This minimizes user-dependent error rates by eliminating mispositioning within a tolerance window. General error messages are displayed in full text on the large screen. The mandrel retraction is programmable and can be automatically retracted early upon achieving the desired bend angle. The compact drive unit with detachable mandrel support offers advantages on site, especially for custom constructions with very large tube feed lengths. It is also available in a stationary version with an integrated storage system for tools and mandrel rods. An economical alternative to fully automated CNC machines. POSSIBLE APPLICATIONS: • Hydraulic piping • Pipeline construction • System engineering, e.g. chemical industry • Metal construction • Prototyping Technical data: • Bending capacity Ø 6 to 50 x 4 mm, depending on material • Minimum/maximum bending radius: 10 mm/140 mm • Minimum bending radii: 1.5 x Ø (standard 2 x Ø) • Multi-function machine control with bend angle setting (0.1°) • Mandrel support lengths: 1500/3000/4500/6000 mm (special versions available in longer lengths) • Maximum bending angle: 180º • Weight: 800-900 kg (depending on version) • Ergonomic operation via safety foot switch OPTIONAL ACCESSORIES: • Automatic mandrel lubrication (minimal quantity) • Pneumatic or hydraulic quick-change chuck • Automated or manual (via foot switch) positioning of length and rotation with brake function • Automatic length and rotation positioning via servomotors • Pneumatic rotation stop • Tube calculation software • Laser-assisted tool monitoring for checking clamping force • 10" touchscreen with integrated tube calculation • Bending radius up to 250 mm • Data transmission via cable (LAN), wireless (WLAN), or USB Duedpfsng Exaex Aaqjt OUR ON-SITE SERVICE: • Welcome to test production in our in-house demo room • Consulting and information session at your location • Consulting and transaction possible as leasing/financed purchase through JUTEC • Trade-in of your current machine • Service contracts and on-site maintenance