Beli Garos Mdf 5600K bekas (179)

Kondisi: sangat baik (bekas), Tahun pembuatan: 2003, Fungsionalitas: berfungsi sepenuhnya, GAROS MDF 5600K ID.NO. 2689 Rodpfx Aorzqzuelaet Garos MDF 5600K Vakuummassierer / Massage-Tumbler mit Kühlfunktion. Fassungsvermögen 5600 Liter, integrierte Vakuumpumpe und zugehöriger Einfülltrichter inklusive. Abmessungen: 520 x 210 cm, Höhe 280 cm.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2018, Garos GBT300 Tote bin tumbler, tahun 2018, stainless steel, mixer tote bin. Solusi lengkap untuk proses tumbler, pencampuran, pelapisan, dan marinasi. Kontrol layar sentuh HMI dengan siklus yang dapat diprogram, 3 fase. Rsdpjy H Hr Tofx Alajt

Kondisi: bekas, Garos GWT 3500 vacuum tumbler dengan sistem penimbangan Scanvaegt dan pompa vakum terintegrasi. Rsdsykub Nopfx Alaet Kapasitas: 3500 liter.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2014, Fungsionalitas: berfungsi sepenuhnya, GAROS GSI 620 CWP ID.NO. 2880 Garos model GSI 620 CWP brine injector with integrated tenderizer and matching purification system. Year of manufacture: 2014. Needle diameter: 4 mm, bridge width: 63 cm. Dimensions: 300 x 220 cm, height: 225 cm. Rjdpfx Asvpvlpslast

Tahun pembuatan: 2002, Kondisi: sangat baik (bekas), GAROS GSI-160 ID.NO. 2576 Garos GSI-160 salt injector with accompanying processing unit. Bridge width 560 mm, suitable for high-capacity production; products can be processed both with or without bones. Rjdpfx Ajpcc Siolast Dimensions: 240 x 175 cm, height 240 cm.

Tahun pembuatan: 2010, jam operasional: 0 h, Kondisi: hampir baru (bekas), This used rotary valve was kept solely as a spare part for an overseas project and was therefore never in operation. The rotary airlock feeder has zero operating hours and is in as-new condition. The used rotary valve with a square inlet is suitable for the controlled feeding and dosing of powdered and granulated bulk materials from silos, hoppers, pneumatic conveying systems, filtration systems, and cyclones. Designation: Rotary Airlock Valve Manufacturer: Sunds MDF Model: LAF-200 Year of manufacture: 2010 Material: Standard steel Rodogw A Etjpfx Alajt Drive motor: 11 kW Dimensions: L 3400 x W 2200 x H 2370 mm Empty weight: approx. 4500 kg Speed: 1475 / 22 Condition: Used Technical documentation: No Note: Inlet L: 1980 mm x W: 1180 mm, Outlet L: 2180 mm x W: 1000 mm, 7 chambers. The rotary valve has zero operating hours and is in as-new condition. Price: On request

Kondisi: siap digunakan (bekas), 1 Rsdpfx Aleyx Hfdjaot

Kondisi: sangat baik (bekas), Tahun pembuatan: 2002, KSF-2E adalah mesin frais CNC spesialis terkemuka di dunia untuk produksi otomatis sepenuhnya dan pemrosesan lengkap sambungan silang dan kisi berkualitas tinggi dalam produksi seri grid jendela dan pintu. Berkat agregatnya, mesin ini menghasilkan sambungan silang dari kayu, aluminium, MDF, atau PVC dengan kualitas luar biasa dan memproses semua elemen kisi grid dengan sempurna. Rodpfoxl Dnasx Alast OPERASI • Sambungan silang dalam berbagai desain dan ukuran • Pemrosesan ujung grid • Pemotongan profil bingkai sesuai ukuran Mesin juga dilengkapi dengan konveyor lintas / penyimpanan elemen tambahan.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2017, Panasonic MDF-C2156VAN Ultra-Low Temperature Freezer External Dimensions (W x D x H): 1730 x 765 x 1010 mm Internal Dimensions (W x D x H): 760 x 495 x 615 mm Capacity: 231 liters Net Weight (approx.): 318 kg Cooling Capacity: -150 °C Temperature Setting Range: -125 to -152 °C Redpfx Aleyvud Ajaet Temperature Control Range: -130 to -150 °C You are welcome to arrange a viewing appointment. We are also happy to organize affordable shipping for you! The purchase price includes VAT. You will receive a proper invoice. For international customers, a net invoice can be issued, provided you have a valid VAT ID number. Subject to prior sale. Visit our shop and take a look at our other offers. All company names and trademarks mentioned are the property of their respective owners and are used solely for identification and product description purposes. Deviations from technical data and errors in the description of the item may occur and are subject to change.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2007, Laboratory Foam Dosing Station with Foam Mixer and Applicator The system operates similarly to the SUPRA MIX concept. Multiple chemicals are dosed and mixed with water and air in a controlled ratio. Recipes are stored on the controller and can be adjusted during operation. Foam Applicator with Mixer • Dynamic foam mixer with online dosing of 5 products plus water • 5 dosing pumps • One direct inlet for the mixture • Product monitoring for the chemicals • Air dosing valve • Dynamic foam mixer with adjustable speed • PLC control • Foam applicator • For single-piece carpets up to 1 m wide Redpou D E A Dofx Alajt Applications - Stain blockers - Soil, water and oil repellents - Fluorocarbons - Antistatic agents - Softeners - Flame retardants - Antibacterial agents - Moth and beetle protection agents - Pile stabilizers - Anti-shedding agents - Resins for crease-resistance and dimensional stability Specification Foam density: 20 - 100 g/l (higher density at lower flow rate) Dosing range: 0.5 - 500 g/l (1:100 with each pump) Foam volume: 50 - 500 l/min Electrical Data Connected load: 6kVA, 10A Mains voltage: 400V / 50Hz Control voltage: 24V Dimensions: HxWxD = 1400 x 2100 x 860 mm Year of manufacture: 2007 Acquisition cost: €47,600 Financing through our partnering bank is available. komplett-konzept.leasingo.de Discover more new and used items in our shop! International shipping costs on request!

Kondisi: baik (bekas), Servomotor, geared motor, electric motor, three-phase motor -Manufacturer: Motor Lenze Type MDFKARS080-22 -Manufacturer: Gearbox Lenze Type GST06-2A VCR 080C22 Rsdefi Tvdjpfx Alajt -Voltage: 390 V -Power: 3.9 kW -Speed: 197.4 rpm -Shaft: Ø 30 x 60 mm -Design: B14 -Protection class: IP54 -Includes: Fan Lenze Type 4656EZ -Dimensions: 620/200/H210 mm -Weight: 35 kg

Kondisi: baik (bekas), Servomotor, Getriebemotor, Elektromotor, Drehstrommotor Rsdpfx Alecqhlceast

Tahun pembuatan: 2004, Kondisi: baik (bekas), Fungsionalitas: berfungsi sepenuhnya, For sale from ongoing production: 1 Juki FX-1 and 2 units of Juki FX-2. Please contact us if you have any questions. Rsdpfx Aovk R H Rjlaot

Kondisi: baru, Tahun pembuatan: 2026, Fungsionalitas: berfungsi sepenuhnya, panjang total: 3.860 mm, lebar total: 1.200 mm, tinggi total: 3.000 mm, berat keseluruhan: 5.500 kg, masa garansi: 12 bulan, lebar bilah: 75 mm, daya: 60 kW (81,58 hp), panjang rotor: 770 mm, MIZAR DSH Series – Twin-Shaft Shredder for Metal, E-Scrap & Plastics High-Torque Performance for Demanding Industrial Applications Engineered for continuous operation, the MIZAR DSH Series delivers powerful, slow-speed, and high-torque shredding performance for the toughest materials. Designed for reliability and built to meet industrial-scale requirements. KEY ADVANTAGES • Drive System: Independent dual shafts powered by heavy-duty planetary gearboxes. High torque at low speed guarantees efficient shredding with minimal wear. • Industrial Components: Siemens/WEG motors, SKF/FAG bearings, Schneider or ABB electrical systems. Globally renowned brands ensure long-term reliability. • Knife Technology: Custom-manufactured, high-alloy, and wear-resistant steel blades. Optimized cutting geometry for aggressive material intake and consistent particle size. • Structural Strength: Reinforced steel frame construction ensures vibration resistance and extended service life. Fully CE-certified for international compliance. APPLICATION AREAS Redpfxegwhb Is Alaet • Metal scrap: Aluminum profiles, radiators, light scrap, sheet metal. • E-scrap: Printed circuit boards (PCBs), motherboards, hard drives, mixed WEEE materials. • Cable Recycling: Copper and aluminum cables, wiring harnesses. • Plastic Waste: HDPE pipes, industrial barrels, PET, big bags. • Wood & Alternative Fuels: Pallets, MDF waste, primary shredding for RDF/SRF production lines. MODEL RANGE & TECHNICAL HIGHLIGHTS (Please enquire for the exact configuration based on your material) • DSH S1: Compact design. Ideal for medium-capacity operations. • DSH M1: Powerful all-round solution for diverse material streams. • DSH L1: High-performance industrial heavyweight for large-scale recycling plants. Why choose Mizar DSH? • High torque without excessive energy consumption • Modular design for seamless integration into complete recycling systems • Easy maintenance access and quick-change knife system • Built for demanding 24/7 industrial environments Need a customized shredding solution? Contact us for a bespoke quotation, technical drawings, or send us your material for a performance test. Mizar Recycling Machinery

Kondisi: bekas, Tahun pembuatan: 2016, TECHNICAL DATA AXES Max. workpiece dimensions X-Y-Z mm: 3050 x 800 x 50 Min. workpiece dimensions X-Y-Z mm: 300 x 90 x 10 Working area Drilling/Grooving mm: 0 x 800 / 0 x 800 Stroke of X axis mm: 750 Max. traverse speed of X-Y axes m/min: 25 DRILLING UNIT Vertical spindles: Number 7 (4X-4Y, one shared) Horizontal spindles (along Y axis): Number 2 (1+1) Horizontal spindles (along X axis): Number 1 Fixed grooving saw (direction): X Grooving saw diameter mm: 100 Max. saw thickness mm: 5 Rodpovvi I Rsfx Alajt Motor power kW (HP): 1.5 (2) Spindle speed rpm: 3350 Grooving saw speed rpm: 4300 INSTALLATION Power supply V (Hz): 380 / 400 (50 / 60) Installed power KVA: 4.5 Compressed air requirement bar: 6 Compressed air consumption Nl/cycle: 90 Extraction requirement m³/h: 1200 Extraction air speed m/sec: 20 Extraction nozzle diameter mm: 80+80 F10L Drilling Unit includes: - 7 independent vertical spindles - Drill chuck D10 mm - Distance between spindles 32 mm - 2 horizontal drilling heads: 1 in X direction with one bit, 1 double drilling head in Y direction (1 + 1 Drill chuck D10 mm) - Speed 3350 rpm - 1 integrated saw unit in X (max. diameter 100 mm) - Saw blade speed 4300 rpm - Motor power 1.5 kW - Vertical pneumatic travel per spindle 70 mm - Horizontal pneumatic travel of the drilling unit Workpiece positioning and drive of working unit A CNC-controlled suction cup clamps and positions the workpiece sequentially under the working unit during machining. Movement along X and Y axes occurs on THK linear guides with transmission via reinforced toothed belts. Movement along Z axis is pneumatic on ball-bushing guides, with adjustable stopper positioning. Positioning of the working units is via DC motor technology and drives. CNC CONTROL The control system was specially developed for use in drilling and milling machines. CN - 7" color display with touchscreen - Alphanumeric keypad - Self-diagnosis and operator language fault messages Programming - Programming via the CN - Automatic optimization of drilling operations - Possibility of panel zero-point shift - Possibility to store and import drilling programs via USB dongle - Ability to import drilling programs from external CAD-CAM software Configuration - User interface in the same language as the manuals - Graphical representation of unit configuration Vacuum suction cup "B-Power" Vacuum suction cup with double vacuum connection, recommended for highly porous panels (e.g., MDF light). Machine operating interface Software: Xilog Maestro USB Hardware and software requirements: - Operating system: Windows XP Professional (SP2), Windows Vista or Windows 7 - Processor: Intel compatible, min. 2GHz; multicore processor recommended - Memory: Minimum 1GB, 2GB recommended - Free disk space: 5GB - Graphics card: OpenGL compatible (Package includes an installation DVD and a USB dongle) Xilog Maestro features Programming - Parametric, graphical programming - Assisted programming with graphic and syntax aids for drilling operations - Ability to create and store machining macros Integrated additional functions - Self-diagnosis and operator language fault messages

Kondisi: bekas, Tahun pembuatan: 2018, en: Startech cn MAIN FEATURES FLEXIBLE AND CUSTOMISABLE PRODUCTION COMBINED WITH SPEED AND PRECISION DRILLING FROM ABOVE WITH REFERENCE TO THE TOP SIDE OF THE PANEL ALLOWS FOR ABSOLUTELY PRECISE MACHINING NUMERICAL CONTROL WITH 7" COLOUR SCREEN: EASY AND INTUITIVE TECHNICAL SPECIFICATIONS Startech CN AXES Max. workpiece dimensions X-Y-Z mm 3050 x 800 x 50 Min. workpiece dimensions X-Y-Z mm 300 x 90 x 10 Working area drilling/grooving mm 0 x 800/0 x 800 X-axis stroke mm 750 Max. traversing speed X-Y axes m/min 25 DRILLING UNIT Vertical spindles Number 7 (4X-4Y, one shared) Horizontal spindles (along Y axis) Number 2 (1+1) Horizontal spindles (along X axis) Number 1 Fixed groove saw (direction) X Groove saw diameter mm 100 Max. groove saw thickness mm 5 Motor power kW (HP) 1.5 (2) Spindle speed rpm 3350 Groove saw speed rpm 4300 INSTALLATION Power supply V (Hz) 380 / 400 (50 / 60) Installed power KVA 4.5 Compressed air requirement bar 6 Air consumption Nl/cycle 90 Extraction requirement m3/h 1200 Extraction air speed m/sec 20 Extraction nozzle diameter mm 120 GENERAL FEATURESUniversal CNC drilling machine with fixed gantry work table and moving workpiece for performing the following operations: - Vertical drilling on the panel surface - Horizontal drilling on all four sides of the workpiece - Grooving with integrated groove saw in "X" direction Self-supporting frame Machine base in steel tube construction to provide a large base for the work table. The structure is positioned on 3 self-levelling feet. The electrical cabinet is integrated into the machine base. Central Bakelite support table "Easy Motion": - an MDF sector for through drilling, automatically swivelling away for horizontal drilling - an infeed roller to facilitate panel feeding - a rear roller track to facilitate panel sliding - left and right stops - a manually adjustable central alignerIt is necessary to use the left and right stops to drill the two opposite panel sides horizontally in the "X" direction. Panel positioning along the X-axis by vacuum suction cups. Unit carriage This is a gantry structure in steel tube construction. The main working unit is installed on the gantry. F10L drilling unit includes: - 7 independent vertical spindles- chuck D10 mm- spindle spacing 32 mm - 2 horizontal drilling heads, 1 in X direction with one drill, 1 double drilling head in Y direction (1 + 1 chuck D10 mm) - speed 3350 rpm- 1 integrated saw unit in X (max. diameter 100 mm) - saw blade speed 4300 rpm- motor power 1.5 kW - vertical pneumatic stroke per spindle 70 mm - horizontal pneumatic stroke of the drilling unit Positioning of the workpiece and drive of the working unit A CNC-controlled vacuum cup clamps the workpiece and positions it sequentially under the working unit during machining. X and Y axis movement on THK linear guides with reinforced toothed belt transmission; Z axis movement is pneumatic on ball-bushing guides with position stop adjustable via the working unit position. Positioning of the work units via state-of-the-art control and drive technology -CONTROL The control system was specially developed for industrial use. Rjdpfx Aljvwbp Asajt

Kondisi: baru, CATALOG NUMBER M0252 PRODUCT FEATURES Main features of the machine: - Single-head drilling machine for drilling within a range of 0 - 90° - Pneumatically adjustable head tilt angle - Side fences can be set with 0.1 mm accuracy - Safety clamps enable quick panel positioning without further adjustments - Spindles equipped with quick couplings - Patented pneumatic material hold-downs - MDF worktable - Fast and precise adjustments - Accurate drilling - Italian manufacture Standard equipment included: - 2 aluminum stops, each 1.5 m (right and left) with four stoppers - 5 quick couplings - Wooden crate for safe machine transportation ADVANTAGES - Drilling vertically/horizontally/at an angle - Multi-spindle machine - Brand new unit - CE certificate - Robust - Professional grade TECHNICAL DATA - Number of spindles: 23 - Distance between first and last drill bit: 704 mm - Center distance between individual spindles: 32 mm - Max. workpiece size: 950 x 3000 mm - Max. workpiece thickness: 60 mm - Max. drilling depth: 65 mm - Number of pneumatic hold-downs: 2 - Working pressure: 6-7 bar - Air consumption: 10 l/cycle - Motor power: 1.5 kW - Noise level: 76.1 dB Rjdpfxex Rqk Is Alaot - Spindle speed: 2800 rpm - Overall dimensions: 1235 / 950 / 1310 mm - Weight: 310 kg Net price: 19,500 PLN Net price: 4,650 EUR Net price according to exchange rate: 4.15 PLN/EUR (price subject to change in the event of significant currency fluctuations)

Kondisi: bekas, Tahun pembuatan: 2026, Special offer – Demonstration machine in Garbsen Our Machine Concept: WL 6 The WEIMA high-performance shredder, with its versatile range of applications, can process all types of wood materials (hardwood, softwood, chipboard, MDF, plywood, veneer offcuts, etc.) into fuel chips, achieving significant volume reduction, especially with bulky materials. Functionality: The machine is equipped with a large feed hopper, which can be loaded either by conveyor belt or manually. The hopper can be adapted to individual needs and ensures continuous and cost-effective material feeding without requiring manual intervention. The hydraulically controlled pusher feeds the wood waste to be shredded into the rotor cutting area, with automatic, load-dependent control. The internal pusher guides are made of highly wear-resistant plastic (polyamide) and are adjustable. Hydraulic cylinders are mounted in a gimbal suspension to avoid lateral forces on the piston seals. The patented, profiled V-rotor made from solid steel has a diameter of 252 mm and runs at a speed of 80–120 rpm. The concave-ground, aggressive, and four-way reversible knives/cutting crowns are mounted in milled knife pockets on special knife holders. The patented system guarantees high throughput, low energy consumption, and optimal discharge of shredded material thanks to a uniquely reduced cutting gap between counterknife and rotor. A screen mounted beneath the rotor determines the chip size (10–100 mm). Upon request, a hydraulically opening screen basket is available. Power from the electric motors is transmitted via V-belts to a robustly dimensioned gearbox, which is mounted on the rotor shaft end. Precise Cutting at High Throughput with Profiled V-Rotor The V-rotor, developed by WEIMA, is universally applicable and made from solid material. Its aggressive material intake with up to two rows of knives guarantees high throughput at low power consumption. It can be fitted with hardened steel cutting knives in edge lengths of 30 mm and 40 mm, which can be rotated several times to significantly reduce maintenance costs. Intuitive Operation Thanks to Siemens PLC Control with Touch Display To ensure optimal alignment of electronics and machine, we design, build, and wire our switch cabinets ourselves – using only high-quality components from manufacturers such as Siemens and Rittal. Intuitive touchscreen interfaces guarantee quick adjustments. Functions such as adjusting the pusher cycle or stop ensure high throughput. Built-in overload protection prevents machine defects. Technical Specifications WL 6 - Feed Opening: 800 x 1,250 mm - Hopper Volume: 0.9 m³ - Rotor Length: 800 mm - Rotor Diameter: 256 mm - Drive Power: 22 kW - Rotor Speed: 90 rpm Rsdpfxsy D E Tdj Alajt - Max. Number of Knives: 42 - Knife Type & Size: concave / 40 x 40 mm; cutting crowns - Screen Hole Size: 10–60 mm - Paint: WEIMA Standard RAL 2022 / 7016 - Electrical Connection: 400 V +/- 5% / 50 Hz - Weight: approx. 1,600 kg Includes: - Control cabinet* (Rittal) incl. electrical control (Moeller / Siemens) and S (incomplete text)

Kondisi: sangat baik (bekas), Tahun pembuatan: 1997, nomor mesin/kendaraan: 90F, Fungsionalitas: berfungsi sepenuhnya, Gergaji potong mitra ganda dengan mata gergaji bundar berdiameter 250-275 mm dan pemotongan pada sudut 45°+45° serta pagar tetap. Operator melakukan pemotongan horizontal 45° dengan menarik satu bilah pada satu waktu. Kapasitas pemotongan lebar (120 mm lebar dan 80 mm tinggi). Hasil potong presisi dan berkualitas tinggi pada kayu lunak dan keras – PS dan semua bahan MDF. Kebisingan rendah dan standar keselamatan tinggi. Sangat cocok untuk pembuat bingkai foto dengan produksi seri kecil. Rodpfx Ajy Iag Telaot

Tahun pembuatan: 2004, Kondisi: siap digunakan (bekas), produsen pengendali: SIEMENS, berat keseluruhan: 1.200 kg, lebar total: 1.200 mm, tinggi total: 1.900 mm, panjang produk (maks.): 2.800 mm, jumlah sumbu: 4, This 4-axis WEIRATHER KS1300/4 was manufactured in 2004. With a maximum milling length of 1300 mm and a milling diameter of 300 mm, it is suitable for various applications such as tool handles and furniture components. The machine operates with a Siemens control system and features a spindle speed of 5300 rpm. If you are looking for a high-quality milling machine, you should consider the WEIRATHER KS1300/4 wood milling machine we have for sale. Contact us for further details. • Condition: Used • Electrical: 400 V, 50 Hz, 4.0 kW • Number of spindles: 4 • Machining principle: longitudinal milling • Key features: • Max. milling length: 1300 mm • Max. milling diameter: 300 mm • Max. recommended workpiece size: 1300 x 150 mm • Spindle speed: 5300 rpm • Operation/features: Low vibration, smooth running; high dimensional accuracy and fine surface quality • Lubrication: Automatic central lubrication (reduced maintenance) • Production type: Suitable for series production • Workpiece type: Long and 3D-shaped parts • Material suitability: Hardwood, softwood, plywood, MDF, selected plastics (with suitable cutters) • Typical applications: • Tool handles, handles for hammers, axes, and gardening tools, walking stick handles • Gunstocks, pistol grips, bow risers • Furniture components: armrests, backrests, handles, decorative strips, wooden feet • Balusters, posts, handrail and volute segments • Paddle and oar handles and shafts • Consoles, corbels, decorative supports, sculptural elements Rjdpey D I Rfsfx Alajt • Foundry models, gauges, templates, fixture components • Knife and tool handles, pestles, handles for kitchen utensils • Certification/conformity: CE marking; EU Declaration of Conformity available • Test run: Under power by prior arrangement • Included: Machine as pictured Additional equipment • Optionally: Additional cutters available • Optionally: Additional templates (only if pictured or explicitly mentioned)

Tahun pembuatan: 2025, Kondisi: baru, Exhibition machine Year of manufacture: 2025 Travel range: 2500x1300x200mm Constructed from 19mm Forescolour, consisting of milling table (X-axis), gantry (Y-axis), Z-axis unit in compact panel and machine base, with adjustable machine feet. Milling bed as sacrificial plate in 19mm MDF. Table openings prepared longitudinally and transversely. Mechanical set consisting of profile guides including guide carriages, recirculating ball screw, and precision rack and pinion. All elements assembled, pre-lubricated, including trial run, immediately ready for operation. Control set consisting of control cables, energy chains, planetary gearboxes, stepper motors, high-performance power stages, power supply, and toroidal transformer, fully pre-assembled in control cabinet, as well as sensors for each axis. Switching relay for automatic control of the existing extraction system. Brush seals for dust protection, as well as CE-compliant safety devices consisting of mobile extraction unit and single-sided mounted laser scanner for workspace monitoring, with 275° and 5.5 m field of view. (Machine positioned in a corner of the room) Handheld control unit equipped with all necessary functions to operate the machine, including emergency stop button and deadman's switch. Tool length sensor for tool length measurement and adjustment of the active zero offset. High-frequency spindle with 2.2 kW, incl. clamping nut, frequency converter, power filter, braking resistor, and collet set. Built-in monitor, incl. mini PC with Windows 11, with Beamicon2 control software, mouse and keyboard, pre-installed in an ergonomic console. CAD license Rhino 8.0 and CAM license Estlcam V12, as well as all necessary documentation, will be sent by email before delivery. Including milling bed constructed as vacuum table consisting of four individually adjustable segments. Cross table made of PE with MDF cover sheet. Becker vacuum pump with a capacity of 100m³/h, oil-lubricated. For the vacuum pump power connection, a 16 Amp, 400 V AC plug is required. The customer is to provide HDF 3mm raw on both sides for the entire vacuum table (2500x1300mm), as sacrificial plate. (Recommended application: machining of coated wood-based panels) Including 10-piece tool set consisting of: 3 pcs. 5mm Z2 (HF52REVHM) 6 pcs. 4mm Z1 (HF41REVHM) 1 pc. 5mm Z3 (HF53SRECAR) (Tool selection can be customized as needed) Rsdpfsxc Rmqjx Alaot Including maintenance package in systainer case Including 150 ml grease gun, one cartridge high-performance grease 400g, 500 ml silicone spray grease, one lubrication nipple incl. hose piece, and 30mm face mill with indexable inserts. Availability: short-term Location: Flörsheim

Kondisi: bekas, Tahun pembuatan: 2023, Demonstration unit! List price: €33,390 – Machine concept: The WEIMA high-performance shredders, with their flexible range of applications, can process all types of wood materials (hardwood, softwood, chipboard, MDF materials, plywood, veneer remnants, etc.) into fuel chips. For bulky materials, they achieve an enormous volume reduction. Operation: The machine is equipped with a large feed hopper and can be loaded either via a conveyor belt or manually. The hopper can be adapted to individual requirements and ensures continuous and cost-effective material feeding without the need for manual assistance. A hydraulically operated pusher feeds the wood waste to be shredded into the rotor’s cutting area, with automatic and load-dependent control. The internal pusher guides are made of highly wear-resistant plastic (polyamide) and are adjustable. The hydraulic cylinders are mounted with universal joints to minimize lateral forces on the piston seals. Rodpjvfy Rzsfx Alast The patented, profiled V-rotor is made of solid steel, has a diameter of 252 mm, and operates at a rotor speed of 80–120 rpm. The concave ground, aggressive and four-way indexable knives/cutting crowns are mounted in milled knife pockets on special knife holders. This patented system ensures, for the first time, the reduction of the cutting gap between counter-knife and rotor, resulting in high throughput, low energy consumption, and optimal discharge of the shredded material. Power transmission from the electric motors is via V-belts to a heavy-duty gearbox mounted on one end of the rotor shaft. Standard features: - V-rotor with a single knife row 40 x 40 mm - Vibration-damping machine feet - Hold-down device on pusher - Horizontal pusher - Control cabinet with 5 m cable, including PLC controller and LOGO! text display - Perforated screen - WEIMA WAP gearbox - Extraction port Ø160 mm - Straight hopper Optional equipment: - Additional rotor knife row (28 knives) - Clearing hopper (LOGSPACER) - Four-sided segmented bottom - Fast reverse hydraulics with shock valve Location:

Kondisi: bekas, Tahun pembuatan: 2023, Exhibition Machine Garbsen HORIZONTAL PANEL SAW GABBIANI P Manufacturer: SCM Model: GABBIANI P80 Year of manufacture: 2023 1.00 unit MAIN FEATURES INDIVIDUALLY SELECTABLE AIR CUSHION TABLES: AN INDISPENSABLE TOOL SIDE SAFETY DEVICES: MORE SPACE FOR WORKING FLOATING CLAMPS: THE GUARANTEE FOR A PERFECT CUT TECHNICAL DATA GENERAL INFORMATION gabbiani p80 Saw blade projection mm: 80 Working table height mm: 950 Number of standard clamps: 5 Number of clamps for versions 33/38/43: 9 / 10 / 10 Number of clamps for versions 33/38/43 with FlexCut 1 unit (single clamp with double fingers included): 10 / 11 / 11 CUTTING DIMENSIONS Version 33 mm: 3300x2100 Version 33 (Opt.) mm: 3300x3200 Version 38 mm: 3800x3200 Version 38 (Opt.) mm: 3800x3800 Version 43 mm: 4300x3200 Version 43 (Opt.) mm: 4300x4300 AXIS SPEEDS Variable saw carriage speed m/min: 6 – 60 Variable pusher speed ( ) m/min: 60 MAIN SAW BLADE Motor power (S6 -40%) - 50Hz (star-delta start) kW (HP): 7 (9) (11) Rotation speed – 50Hz rpm: 4650 Saw blade diameter mm: 340 Main saw blade shaft diameter mm: 80 SCORING SAW Motor power (S6 -40%) - 50Hz kW (HP): 1.5 (2) Rotation speed – 50Hz rpm: 5850 Scoring blade diameter mm: 200 Scoring saw spindle diameter mm: 80 INSTALLATION Installed power kW: 12÷15 Machine base voltage Euro voltage (400 V / 50 Hz) Compressed air requirement NL/min: 300 Required air pressure bar: 7 Extraction air requirement m³/h: 2440 Extraction air speed m/sec: 20 Extraction spigot diameter mm: 4x120 ( ) Note: For countries where EC standards apply, the forward feed speed of the pusher is limited to 25 m/min. GENERAL CHARACTERISTICSAutomatically controlled horizontal panel saw with PC/PLC control unit, for cutting panels of solid wood, MDF, chipboard, plywood and similar materials. Machine frame and work table - Machine frame constructed as steel tube design - Work table made of rib-reinforced steel with Bakelite coating - Longitudinal fence on the left sideSaw carriage made of steel, consisting of: - a motor for the main saw blade and a motor for the scoring blade - Vertical lift of the saw blade on linear ball guides and shoes - Guide wheels made of hardened and ground steel - Balanced mass distribution for best cutting quality - Direction of travel against the longitudinal fence - Saw carriage drive via rack and pinion - Carriage runs on cylindrical guides - Cylindrical guides made of hardened and ground steel (5 years warranty), protected by special dust wipers - Pneumatic switch for fast and safe change of main saw blade and scoring bladePressure beam - Pressure beam with uniform pressure on the workpiece over the entire cutting length with recesses to avoid collisions with the clamps; pneumatic height adjustment via high-precision racks and pinions, pressure adjustable from 1.5 to 6 bar - Double extraction system with a unit above the pressure beam for cleaning the work table and a unit below on the saw carriage - Lateral automatic aligner with pneumatic cylinder over the entire length. Slides on linear ball guides and shoes.* Travel: 1200 mm* Minimum working width: 60 mm* Maximum working width: 1200 mmPositioning pusher and rear section of the machine - Positioning pusher over the entire length with motor drive via a robust shaft. Positioning pusher... Redpex Twcvjfx Alajt

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2021, panjang pemotongan (maks.): 2.700 mm, lebar benda kerja (maks.): 110 mm, Optimizing cross-cut saw from 2021. The Paul Reinhardt SlimLine 110 is an automatic cross-cut saw suitable for wood lengths from 300 to 3000 mm and widths from 30 to 350 mm. It is designed for various wood types, including MDF and solid wood, with a maximum cross-section of 58 x 125 mm. If you are looking for a high-quality cutting machine, you should consider the Paul Reinhardt SlimLine 110, which we are offering for sale. Contact us for further details. • Condition: Not refurbished - sold without warranty • Cutting direction: right to left • Wood types: MDF, chipboard, solid wood, Kerto, plywood • Workpiece dimensions: • Length: 300-3000 mm • Width: 30-350 mm • Minimum cross-section: 15 x 30 mm • Maximum cross-section: 58 x 125 mm • Processing: automatic cutting • Working height: 900 mm • Electrical connection: 400 V / 50 Hz / 3 Ph • Main motor: 5.5 kW (400 VΔ / 690 VY, 50 Hz) • Control system: Electronic control with Windows 10 and Beckhoff TwinCAT • Optimization: Full optimization without defect shutdown Redpfx Aoy Dru Uolaot Additional equipment • Infeed with 3 buffer stations (infeed buffering / automation) • Software / additions: • Residual material monitoring • PALETTI Process Viewer • PALETTI Office

Kondisi: baru, Tahun pembuatan: 2026, Efficient and precise CNC router CORMAK C1325 BSP, equipped as standard with SERVO drives, features a frame made of steel and cast iron, ensuring high rigidity and resistance to overload during operation. This machine is designed for machining and cutting wood materials, chipboard, MDF, OSB, plywood, as well as plastic materials such as PVC, plexiglass, and dibond. Operator training at our facility is included with every machine purchase! Frame Construction Rigid, welded steel construction Gantry arms are made of thick, hardened, powder-coated sheet metal, increasing rigidity and thus improving the quality of machined parts. Work Table The hybrid work table features T-slots for manual clamping of materials up to 1300 x 2500 mm. Drive System High-power motors ensure optimal acceleration and speed in all axes. Renowned HIWIN rack and pinion drives on X and Y axes deliver durability and precision. All axes run on linear rail guides. The machine comes with a tool height sensor. Linear bearings: trapezoidal guides. Spindle Rjdeiz A Ezopfx Alaot Premium spindle characterized by durability. Equipped with air cooling system. Fitted with high-quality machine bearings for quiet operation and enhanced durability. Tool height sensor included. Spindle speed adjustable from 4,500 to 18,000 rpm. Tool clamping via 3 ER32 collets (1/8", 1/2", 5-6mm). Software Supplied standard with ARTCAM PRO. Optional: UCANCAM V11 CAD/CAM CNC software (Polish version available). Software allows rapid and easy design; programs are converted to G-code. Import of ready files from other applications is supported. DSP Control System Digital Signal Processing technology. The machine’s DSP controller features its own processor and RAM, providing reliable operation and simple use. The controller guarantees smooth running and accuracy during machining. After power loss, it is not necessary to reinitialize the program. Built-in controller memory allows the machine to run without reloading programs each time. Technical Specifications Spindle: 5.5 kW / 18,000 rpm, frequency inverter, air-cooled Working area: 1300 x 2500 mm Max spindle height: 350 mm Control: DSP Software resolution: 0.001 mm Software: Included Power supply: 400V Weight: 980 kg Machine dimensions: 2100 x 3100 x 2200 mm Table height: 715 mm Guides: Linear Drive transmission: Rack and pinion IMPORTANT! The machine is equipped with a function to remember the last G-code path. In the event of a failure or power loss, the machine resumes operation from the last position, eliminating time and material waste. For further information, please contact us.