Beli Gualapack Chp 2H bekas (1.195)

Kondisi: sangat baik (bekas), Umumnya digunakan untuk makanan bayi, puree, saus, koktail, makanan disfasia, produk pembersih, dan lain-lain. Ljdpfxeyzcvqs Aptorn

Kondisi: bekas, telah diuji fungsinya; item berasal dari pembongkaran fasilitas pemasok otomotif Pabrikan: Mettler Toledo Tipe: IMPGI0015K4-2H-SA Fungsi: sel beban presisi untuk aplikasi industri Prinsip pengukuran: strain gauge Material: baja tahan karat Kelas perlindungan: IP68 Sinyal keluaran: millivolt per volt (mV/V) Lsdpfx Apjzgbz Hjtsrn Tegangan suplai: 5–12 V DC Jenis sambungan: 4-kawat Aplikasi: timbangan platform, sistem dosing dan pengisian

Kondisi: baik (bekas), Tahun pembuatan: 2021, lebar total: 500 mm, panjang total: 800 mm, tinggi total: 500 mm, berat keseluruhan: 65 kg, ketebalan lembaran (maks.): 40 mm, kecepatan operasi: 2.600 mm/dtk, 9406 Ljdpfx Aezcng Ajptsrn

Kondisi: baik (bekas), Tahun pembuatan: 2013, lebar total: 500 mm, panjang total: 800 mm, tinggi total: 500 mm, berat keseluruhan: 65 kg, ketebalan lembaran (maks.): 40 mm, tegangan masuk: 3.000 V, kecepatan operasi: 2.600 mm/dtk, 9404 Lodpfxozcngcj Aptjrn

Kondisi: baru, Bucher QR2H-008 / 2H-003R pompa roda gigi internal, SN:34460915, belum pernah digunakan, 100% berfungsi, lingkup pengiriman sesuai foto Lrodpfx Apoi D Ulveten

Kondisi: bekas, PLTU CHP MAN Rollo model E3262 L232 berbahan bakar gas alam, sangat sedikit digunakan, tahun pembuatan 2022, hanya 2000 jam operasi! Produsen mesin adalah MAN Rollo dengan konfigurasi V12, daya mesin bruto 515 kW, 1500 RPM. Alternator berkapasitas 415V, 3 fasa, 50Hz. Kapasitas output: 435 kWel, 553 kWth. Lsdpozcwiaefx Aptorn

Tahun pembuatan: 2014, jam operasional: 59.436 h, Kondisi: siap digunakan (bekas), Fungsionalitas: berfungsi sepenuhnya, Buderus Loganova EN20 BHKW – 19 kW el. / 38 kW th. – Year of construction 2014 For sale: Combined Heat and Power Plant (CHP unit) by Buderus, model Loganova EN20, removed from a commercial property in Stuttgart. The unit is being decommissioned as part of an energy supply modernization project. Technical Data: * Manufacturer: Buderus * Model: Loganova EN20 * Year of manufacture: 2014 * Electrical output: 19 kW * Thermal output: 38 kW * Operating hours: 59,436 h * Start cycles: 6,031 * Maintenance: Premium maintenance contract since commissioning Condition: The system starts and ramps up correctly. Currently, there is a fault in the heat exchanger. An initial inspection indicates a defective heating water pump. The CHP unit is currently out of operation. Location & Availability: Location: 70567 Stuttgart Planned decommissioning / dismantling: June–July 2026 Note: Regularly serviced unit with documented service history. Sale due to facility modernization. Viewing possible by appointment. Lrodpfx Apozd Uhheton If interested, we will be happy to provide further information and photos upon request.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1993, Fungsionalitas: berfungsi sepenuhnya, jenis bahan bakar: gas, arus keluaran: 178 A, tegangan keluaran: 6.600 V, frekuensi keluaran: 50 Hz, daya semu kontinu: 1.976 kVA, produsen motor: MWM Deutz, MWM Deutz TBDG 441 BV16, termasuk generator BHKW, bahan bakar ganda, gas, diesel, tahun 1993. Juga dijual suku cadang seperti turbocharger, pompa injeksi, kepala silinder, poros engkol, dll. Tersedia 7 unit mesin dan generator. AVK 6600V 173A 50Hz, kontrol. Ljdey Hmhbopfx Aptjrn

Kondisi: bekas, Tahun pembuatan: 2011, en-001 Lsdou Nvp Sepfx Aptorn

Kondisi: bekas, berat kosong: 3.700 kg, berat muatan maksimum: 14.300 kg, berat keseluruhan: 18.000 kg, konfigurasi gandar: 2 gandar, pendaftaran pertama: 01/2008, inspeksi berikutnya (TÜV): 08/2025, suspensi: udara, ukuran ban: 315/80R22.5, warna: hijau, jarak tempuh: 1.001 km, tipe perpindahan gigi: lain, kabin pengemudi: lain, Perlengkapan: ABS,

Kondisi: bekas, berat muatan maksimum: 21.130 kg, berat keseluruhan: 34.000 kg, konfigurasi gandar: 2 gandar, pendaftaran pertama: 10/2024, inspeksi berikutnya (TÜV): 11/2026, lebar total: 2.540 mm, tinggi total: 1.980 mm, Perlengkapan: ABS,

Kondisi: baru, berat muatan maksimum: 14.600 kg, berat keseluruhan: 18.000 kg, konfigurasi gandar: 2 gandar, panjang ruang muatan: 7.100 mm, lebar total: 2.550 mm, tinggi total: 1.200 mm, Tahun pembuatan: 2026, Perlengkapan: ABS,

Kondisi: baru, Tahun pembuatan: 2020, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 81159538275956, daya: 275 kW (373,90 hp), jumlah silinder: 12, kecepatan rotasi (min.): 1.500 rpm, berat keseluruhan: 1.763 kg, Verfügbare MAN-basierte Holzvergaser-Module. Verfügbare Stückzahl: 23 Einheiten. Unbenutzt (neu) Für potenzielle Käufer bieten wir auf separater Vereinbarung einen Umbau-Service dieser Motoren auf Erdgas- oder Diesel-Spezifikation an. MAN V12X-2200 • 12 Zylinder, 29,6 Liter Hubraum • Bohrung 138 mm, Hub 165 mm • Leistung: 1618 kW MAN V12X-2000 • 12 Zylinder, 24,2 Liter Hubraum • Bohrung 128 mm, Hub 165 mm • Leistung: 1471 kW MAN V12-1900 • 12 Zylinder, 24,2 Liter Hubraum • Bohrung 128 mm, Hub 165 mm • Leistung: 1397 kW MAN V12-1650-1800 • 12 Zylinder, 24,2 Liter Hubraum • Bohrung 128 mm, Hub 165 mm • Leistung: V12-1650 mit 1213 kW, V12-1800 mit 1324 kW MAN V12-1550-1400 • 12 Zylinder, 24,2 Liter Hubraum • Bohrung 128 mm, Hub 165 mm • Leistung: V12/1550-140 mit 1213 kW, V12/1400 mit 1029 kW MAN Dieselmotoren für die kommerzielle Schifffahrt Lsdpfsxcudajx Aptern MAN D3872 (Leichter und mittlerer Betrieb) • 12 Zylinder, 29,6 Liter Hubraum • Bohrung 138 mm, Hub 165 mm • Leistung: 1471 – 1618 kW / 1213 kW MAN D2862 Dual Fuel (Mittlerer Betrieb) • 12 Zylinder, 24,2 Liter Hubraum • Bohrung 128 mm, Hub 157 mm • Leistung: 794 kW MAN D2862 (Leichter, mittlerer und schwerer Betrieb) • 12 Zylinder, 24,2 Liter Hubraum • Bohrung 128 mm, Hub 157 mm • Leistung: 1029 – 1471 kW / 749 – 1066 kW / 551 – 735 kW MAN Hilfsaggregate MAN D2862 • 12 Zylinder, 24,24 Liter Hubraum • Bohrung 128 mm, Hub 157 mm • Leistung: 600 – 800 kW

Kondisi: baru, Tahun pembuatan: 2026, daya: 180 kW (244,73 hp), jumlah silinder: 12, kapasitas silinder: 25 cm³, daya nominal: 200 kW (271,92 hp), Keluaran termal 320 kW Ledpfx Ajy Urx Ueptsrn

Kondisi: baru, Tahun pembuatan: 2025, gaya penekanan: 500 t, panjang langkah: 1.000 mm, lebar meja: 1.200 mm, panjang meja: 1.500 mm, tekanan kerja: 250 batang, Perlengkapan: dokumentasi / manual, penghadang cahaya keselamatan, CRONOSSTECH CHP 500 H-Type Single-Acting Hydraulic Press – 8-Guided Slides General Description The CRONOSSTECH CHP series H-type single-acting hydraulic presses are high-rigidity industrial press solutions developed for sheet metal forming, straightening, assembly, and die pressing applications. The 8-slide H-frame design ensures balanced distribution of the high loads generated during pressing, guaranteeing stable and repeatable operation. Model CHP 500 is engineered for long-lasting and reliable performance in heavy-duty production processes requiring high tonnage. CHP Series – Structural Features The CHP series presses are engineered for heavy-duty conditions. The frame and load-bearing components are stress-relieved through vibration. Bronze Zr14 slide bearings ensure smooth load distribution and long-term precision throughout the ram’s travel. ⚙️ Standard Equipment - Steel construction, 8-slide H-frame press body - Stress-relieved frame and carrier parts by vibration - Bronze Zr14 slide bearings - Welding applications approved for WPQR & WPS with TÜRK-AK accreditation (EN ISO 15614-1:2017 / EN ISO 14731) - Machine structure designed and manufactured in compliance with CE standards - PLC-controlled hydraulic system - Touch panel display (DELTA 7”) - Adjustable ram stroke and tonnage control - Automatic lubrication system - Electronically controlled filter contamination warning - Display of hydraulic unit oil temperature and system status on-screen - Cooling system - Off-line filtration - Two-hand control system - Light barrier (standard for operator safety) - SIEMENS – SCHNEIDER switchgear 📐 Technical Specifications – CHP 500 Type: Steel construction, 8-slide H-frame press Body Material: St52 – ERDEMİR Slide Bearings: Bronze Zr14 Capacity (Ram): 500 Tons Movable Table Size: 1200 × 1500 mm Fixed Table Size: 1200 × 1500 mm Lrsdpfx Apox N T H Ajton Parallelism Tolerance: 120 micron/m Perpendicularity Tolerance: 60 micron/m Stroke (Ram): 1000 mm Min. Clearance: 100 mm Max. Clearance: 1100 mm Weld Stress Relief: Vibration stress relief Welding Application: WPQR & WPS certification accredited by TÜRK-AK according to EN ISO 15614-1/2017 (Supervised by certified welding coordination engineers per EN ISO 14731) Max. Working Pressure: 250 Bar Total Motor Power: 45 kW – IE3 Main Pump: 70 cm³ – REXROTH or PARKER Movable Table Fast Down Speed: 150 mm/s Movable Table Drawing Speed: 12 mm/s Movable Table Return Speed: 170 mm/s Main Cylinder Inner Diameter: Ø500 mm – Ck45 Auxiliary Acceleration Cylinders: 2 units Approx. Height: 5800 mm Approx. Width: 3250 mm Approx. Depth: 2200 mm Lower Table Height from Ground: 1400 mm Pre-fill Valve: NG 150 Hydraulic Unit: REXROTH or PARKER Cooling System: EMMEGI – CIESSE – PARKER Off-line Filtration: REXROTH or PARKER Linear Scale: NOVATECHNIK or TURCK PLC Application: DELTA Touch Panel Display: DELTA 7” Switchgear: SIEMENS – SCHNEIDER Approx. Weight: 23 Tons Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Kondisi: baru, Tahun pembuatan: 2025, gaya penekanan: 1.000 t, panjang langkah: 1.000 mm, lebar meja: 1.500 mm, panjang meja: 2.000 mm, tekanan kerja: 250 batang, Perlengkapan: dokumentasi / manual, penghadang cahaya keselamatan, CRONOSSTECH CHP 1000 H-Frame Single-Acting Hydraulic Press – 8 Guideways General Description The CRONOSSTECH CHP series H-frame single-acting hydraulic presses are designed for sheet metal forming, deep drawing, straightening, and heavy-duty pressing applications that require high tonnage. The 8-guided H-frame structure distributes the high forces generated during pressing evenly, providing maximum rigidity, precision, and long service life. The CHP 1000 model is developed to deliver reliable and stable performance for heavy industry production lines. CHP Series – Structural Features CHP series presses are engineered to withstand the demanding conditions of heavy industry. The frame and main supporting structures are stress-relieved using vibration methods. Bronze Zr14 guide bushings ensure smooth load distribution and high precision throughout the ram movement. ⚙️ Standard Equipment • Steel construction, 8-guideway H-frame press body • Stress-relieved frame structure by vibration • Bronze Zr14 guide bushings • WPQR & WPS certified welding applications accredited by TÜRK-AK (EN ISO 15614-1:2017 / EN ISO 14731) • Design and manufacturing in compliance with CE standards • PLC-controlled hydraulic system • Touch panel display (DELTA 7”) • Adjustable ram stroke and tonnage control • Automatic lubrication system • Electronic filter contamination indicator • Monitoring of hydraulic unit oil temperature and system status via display • Cooling system • Off-line filtration • Two-hand control system • Light curtain (operator safety as standard) • SIEMENS – SCHNEIDER switchgear components Lodpfx Aex N T Rbeptern 📐 Technical Specifications – CHP 1000 Type: Steel construction, 8-guideway H-frame press body Frame Material: St52 – ERDEMİR Guide Bushings: Bronze Zr14 Capacity (Ram): 1000 Tons Moving Table Size: 1500 × 2000 mm Fixed Table Size: 1500 × 2000 mm Parallelism Tolerance: 120 micron/meter Perpendicularity Tolerance: 60 micron/meter Stroke (Ram): 1000 mm Min. Daylight: 100 mm Max. Daylight: 1100 mm Weld Stress Relief: Vibration stress relief Welding Application: EN ISO 15614-1/2017 certified by TÜRK-AK for WPQR and WPS Max. Working Pressure: 250 Bar Total Motor Power: 75 kW – IE3 Main Pump: 70 cm³ – REXROTH or PARKER Moving Table - Fast Approach Speed: 150 mm/sec Moving Table - Pressing Speed: 12 mm/sec Moving Table - Return Speed: 170 mm/sec Main Cylinder Bore: Ø500 mm – Ck45 (2 pcs) Auxiliary Acceleration Cylinders: 2 pcs Approx. Press Height: 6000 mm Approx. Press Width: 3450 mm Approx. Press Depth: 2400 mm Distance from Floor to Lower Table: 1450 mm Pre-fill Valve: NG 200 Hydraulic Unit: REXROTH or PARKER Cooling System: EMMEGI – CIESSE – PARKER Off-line Filtration: REXROTH or PARKER Linear Position Transducer: NOVATECHNIK or TURCK PLC Application: DELTA Touch Panel Display: DELTA 7” Switchgear: SIEMENS – SCHNEIDER Approx. Weight: 55 Tons Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Kondisi: baru, Tahun pembuatan: 2025, gaya penekanan: 1.200 t, panjang langkah: 1.000 mm, lebar meja: 1.500 mm, panjang meja: 2.000 mm, tekanan kerja: 250 batang, Perlengkapan: dokumentasi / manual, penghadang cahaya keselamatan, RONOSSTECH CHP 1200 H-Type Hydraulic Deep Drawing Press – 8 Way Guided General Description The CRONOSSTECH CHP Series H-Type Hydraulic Deep Drawing Presses are specifically designed for deep drawing, forming, shaping, and heavy-duty pressing applications. The 8-way guided H-frame structure ensures maximum rigidity, stability, and precision under high tonnage loads. The CHP 1200 model delivers reliable and long-lasting performance for demanding industrial production lines requiring high force. The frame is stress-relieved by vibration, ensuring even load distribution during pressing operations and maintaining parallelism and perpendicularity tolerances. ⚙️ Standard Equipment - Steel construction, 8-way guided H-frame press body - Stress-relieved frame by vibration - Bronze Zr14 slideways - WPQR and WPS certified welding applications accredited by TÜRK-AK (EN ISO 15614-1:2017 / EN ISO 14731) - Design and manufacturing according to CE standards - PLC-controlled hydraulic system - Touchscreen panel (DELTA 7”) - Adjustable ram stroke and tonnage control - Automatic lubrication system - Electronically monitored filter contamination alert - On-screen monitoring of hydraulic unit oil temperature and system status - Cooling system - Off-line filtration - Safety systems for operator protection - SIEMENS – SCHNEIDER electrical components 📐 Technical Specifications – CHP 1200 Type: Steel construction, 8-way guided H-frame press body Frame Material: St52 – ERDEMİR Slideway Bearings: Bronze Zr14 Capacity (Ram): 1200 Tons Moving Table Dimensions: 1500 × 2000 mm Fixed Table Dimensions: 1500 × 2000 mm Parallelism Tolerance: 120 micron/m Perpendicularity Tolerance: 60 micron/m Stroke (Ram): 1000 mm Min. Daylight: 100 mm Max. Daylight: 1100 mm Stress Relief: Vibration-based stress relieving Welding Application: WPQR and WPS certified welding, accredited by TÜRK-AK and compliant with EN ISO 15614-1/2017 Max. Working Pressure: 250 Bar Total Motor Power: 75 kW – IE3 Main Pump: 70 cm³ – REXROTH or PARKER Moving Table Rapid Descent Speed: 150 mm/sec Moving Table Drawing Speed: 12 mm/sec Moving Table Return Speed: 170 mm/sec Main Cylinder Internal Diameter: Ø560 mm – Ck45 (2 pcs) Auxiliary Acceleration Cylinders: 2 pcs Approximate Press Height: 6100 mm Approximate Press Width: 3550 mm Approximate Press Depth: 2400 mm Lower Table Height from Floor: 1450 mm Pre-fill Valve: NG 200 Hydraulic Unit: REXROTH or PARKER Cooling System: EMMEGI – CIESSE – PARKER Off-line Filtration: REXROTH or PARKER Linear Distance Ruler: NOVATECHNIK or TURCK PLC Application: DELTA Touchscreen Panel: DELTA 7” Switchgear: SIEMENS – SCHNEIDER Approximate Weight: 60 Tons Production Note Lodpfx Aex N T Rujptjrn This machine is manufactured in Turkey by CRONOSSTECH.

Kondisi: baru, Tahun pembuatan: 2025, gaya penekanan: 2.500 t, panjang langkah: 1.000 mm, lebar meja: 1.800 mm, panjang meja: 2.600 mm, tekanan kerja: 250 batang, Perlengkapan: dokumentasi / manual, penghadang cahaya keselamatan, CRONOSSTECH CHP 2500 H-Type Hydraulic Press – 8-Guided Slides General Description The CRONOSSTECH CHP series H-type hydraulic presses are engineered for heavy-duty forming, deep drawing, and metal spinning applications that require extremely high tonnage. The 8-slide H-frame design ensures maximum rigidity throughout the pressing operation, maintaining parallelism and squareness tolerances consistently over long strokes. The CHP 2500 model features large table dimensions, a multi-cylinder main pressing system, and a high-capacity hydraulic unit, making it suitable for automotive, heavy industry, defense industry, and high-tonnage die applications. The frame is stress-relieved by vibration to ensure long-lasting and reliable operation. ⚙️ Standard Equipment - Steel construction, H-frame press body with 8-guided slides - Vibration stress-relieved welded frame - Bronze Zr14 slide bearings - Welded joints approved by WPQR and WPS in accordance with TÜRK-AK accreditation (EN ISO 15614-1:2017 / EN ISO 14731) - Design and manufacturing in compliance with CE standards - PLC-controlled hydraulic system - 7" DELTA touchscreen control panel - Adjustable ram stroke and tonnage control - Automatic lubrication system - Electronic filter contamination warning - Real-time display of hydraulic oil temperature and system status - Cooling system - Off-line filtration - Safety systems for operator protection - SIEMENS – SCHNEIDER electrical components 📐 Technical Specifications – CHP 2500 - Type: Steel construction, H-frame with 8-guided slides - Frame Material: St52 – ERDEMİR - Slide Bearings: Bronze Zr14 - Capacity (Ram): 2500 Tons - Moving Table Size: 1800 × 2600 mm - Fixed Table Size: 1800 × 2600 mm - Parallelism Tolerance: 120 microns/m - Squareness Tolerance: 60 microns/m - Stroke (Ram): 1000 mm - Min. Daylight: 200 mm - Max. Daylight: 1200 mm - Weld Stress Relief: By vibration - Weld Certification: WPQR and WPS certified by TÜRK-AK, per EN ISO 15614-1/2017 - Max. Working Pressure: 250 Bar - Total Motor Power: 180 kW – IE3 - Main Pump: 140 cm³ – REXROTH or PARKER - Rapid Down Speed (Moving Table): 150 mm/s - Forming Speed (Moving Table): 12 mm/s - Return Speed (Moving Table): 170 mm/s - Main Cylinder Bore: Ø565 mm – Ck45 (4 units) - Auxiliary Acceleration Cylinders: 2 units - Approx. Press Height: 6500 mm - Approx. Press Width: 3950 mm - Approx. Press Depth: 2600 mm - Bed Height from Floor: 1500 mm - Pre-fill Valve: NG 200 - Hydraulic Unit: REXROTH or PARKER - Cooling System: EMMEGI – CIESSE – PARKER - Off-line Filtration: REXROTH or PARKER - Linear Distance Sensor: NOVATECHNIK or TURCK Lrsdpfxex N T S Ej Aptjn - PLC: DELTA - Touchscreen Control Panel: DELTA 7” - Electrical Components: SIEMENS – SCHNEIDER - Approx. Weight: 120 Tons Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Kondisi: baru, Tahun pembuatan: 2025, gaya penekanan: 100 t, panjang langkah: 500 mm, lebar meja: 800 mm, panjang meja: 1.000 mm, tekanan kerja: 250 batang, Perlengkapan: dokumentasi / manual, penghadang cahaya keselamatan, CRONOSSTECH CHP 100 H-Frame Single-Acting Hydraulic Press – 8-Guide General Description The CRONOSSTECH CHP series H-frame single-acting hydraulic presses are industrial machines designed for sheet metal forming, straightening, assembly, and die pressing applications, featuring a robust steel construction. The 8-guide H-frame structure ensures high stability and repeatable precision during pressing operations. CHP Series – Structural Features CHP series presses are engineered for heavy-duty use. The frame and supporting components are stress-relieved via vibration methods. The slide bearings use bronze Zr14 material, providing long-lasting and stable operation. Key Advantages - 8-guide H-frame structure - Stress-relieved steel construction via vibration - Welding procedures compliant with ISO standards - PLC control with touchscreen operation - Design focused on operator safety and process stability ⚙️ Standard Equipment - Steel construction, 8-guide H-type press frame - Stress-relieved frame and support parts by vibration - Bronze Zr14 slide bearings - WPQR & WPS certified welding procedures with TÜRK-AK accreditation (EN ISO 15614-1:2017 / EN ISO 14731) - Machine structure designed and manufactured in accordance with CE standards - PLC-controlled hydraulic system - 7” DELTA touchscreen panel - Adjustable ram stroke and tonnage control - Automatic lubrication system - Electronic filter contamination warning - Monitoring of hydraulic unit oil temperature and system status via display - Cooling system and off-line filtration - Dual-hand operator control system - Light curtain safety barrier (standard for operator safety) - SIEMENS – SCHNEIDER switchgear components 📐 Technical Specifications – CHP 100 Type: Steel construction, 8-guide H-frame press body Frame Material: St52 – ERDEMİR Slide Bearing: Bronze Zr14 Capacity (Ram): 100 Ton Movable Table Size: 800 × 1000 mm Fixed Table Size: 800 × 1000 mm Parallelism Tolerance: 120 micron/m Perpendicularity Tolerance: 60 micron/m Stroke (Ram): 500 mm Min. Daylight Opening: 100 mm Max. Daylight Opening: 600 mm Stress Relief: Vibratory stress relief Welding: EN ISO 15614-1/2017 certified by TÜRK-AK accreditation with WPQR and WPS approval (Supervised by certified welding coordination engineers according to EN ISO 14731) Max. Working Pressure: 250 Bar Total Motor Power: 11 kW – IE3 Main Pump: 22 cm³ – REXROTH or PARKER Movable Table Fast Descent Speed: 150 mm/s Movable Table Pressing Speed: 12 mm/s Movable Table Return Speed: 170 mm/s Main Cylinder Bore: Ø230 mm – Ck45 Auxiliary Acceleration Cylinders: 2 pcs Approx. Press Height: 3400 mm Lrodsx N Tx Sspfx Apten Approx. Press Width: 2950 mm Approx. Press Depth: 2000 mm Lower Table Height Above Floor: 1250 mm Pre-fill Valve: NG 100 Hydraulic Power Unit: REXROTH or PARKER Cooling System: EMMEGI – CIESSE – PARKER Off-line Filtration: REXROTH or PARKER Linear Position Sensor: NOVATECHNIK or TURCK PLC: DELTA Touchscreen Panel: DELTA 7” Electrical Components: SIEMENS – SCHNEIDER Approximate Weight: 6.5 Ton Production Note This machine is manufactured in Turkey by CRONOSSTECH.

Kondisi: baru, Tahun pembuatan: 2025, gaya penekanan: 200 t, panjang langkah: 600 mm, lebar meja: 800 mm, panjang meja: 1.000 mm, tekanan kerja: 250 batang, Perlengkapan: dokumentasi / manual, penghadang cahaya keselamatan, CRONOSSTECH CHP 200 H-Type Single-Acting Hydraulic Press – 8-Guided Slides General Description The CRONOSSTECH CHP series H-type single-acting hydraulic presses are high-rigidity industrial press solutions designed for sheet metal forming, straightening, assembly, and die pressing applications. Thanks to their 8-guide H-frame body, loads generated during pressing are evenly distributed, ensuring stable and repeatable operation. The CHP 200 model is engineered for applications requiring medium to high tonnage, with a focus on reliable performance and long service life. CHP Series – Structural Features CHP series presses are designed for heavy-duty industrial use. The frame and carrier components are stress-relieved by vibration. Bronze Zr14 slide bushings ensure smooth ram movement and long-term precision stability. ⚙️ Standard Equipment - Steel construction, 8-guide H-type press body - Stress-relieved body and carrier parts via vibration - Bronze Zr14 slide bushings - WPQR & WPS certified welding with TÜRK-AK accreditation (EN ISO 15614-1:2017 / EN ISO 14731) - Machine structure designed and manufactured in compliance with CE standards Lodox N T D Ujpfx Aptorn - PLC-controlled hydraulic system - Touchscreen panel (DELTA 7”) - Adjustable ram stroke and tonnage control - Automatic lubrication system - Electronically-controlled filter contamination warning - Monitoring of hydraulic unit oil temperature and system status via screen - Cooling system - Off-line filtration - Two-hand control system - Light curtain (standard for operator safety) - SIEMENS and SCHNEIDER electrical components 📐 Technical Specifications – CHP 200 Type: Steel construction, 8-guide H-frame press body Frame Material: St52 – ERDEMİR Slide Bushings: Bronze Zr14 Capacity (Ram): 200 Tons Movable Table Dimensions: 800 × 1000 mm Fixed Table Dimensions: 800 × 1000 mm Parallelism Tolerance: 120 micron/m Perpendicularity Tolerance: 60 micron/m Ram Stroke: 600 mm Min. Daylight: 100 mm Max. Daylight: 700 mm Stress Relief: Vibration Welding Application: TÜRK-AK WPQR and WPS certified welding (with EN ISO 15614-1/2017 welding application certificate, supervised by certified welding coordinators according to EN ISO 14731) Max. Working Pressure: 250 Bar Total Motor Power: 22 kW – IE3 Main Pump: 32 cm³ – REXROTH or PARKER Movable Table Rapid Down Speed: 150 mm/sec Movable Table Pressing Speed: 12 mm/sec Movable Table Return Speed: 170 mm/sec Main Cylinder Bore: Ø320 mm – Ck45 Auxiliary Acceleration Cylinders: 2 pcs Approx. Press Height: 3800 mm Approx. Press Width: 2950 mm Approx. Press Depth: 2200 mm Lower Table Height from Floor: 1350 mm Pre-fill Valve: NG 125 Hydraulic Unit: REXROTH or PARKER Cooling System: EMMEGI – CIESSE – PARKER Off-line Filtration: REXROTH or PARKER Linear Position Transducer: NOVATECHNIK or TURCK PLC: DELTA Touchscreen Panel: DELTA 7” Electrical Components: SIEMENS – SCHNEIDER Approx. Weight: 8 Tons Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Kondisi: baru, Tahun pembuatan: 2025, gaya penekanan: 150 t, panjang langkah: 500 mm, lebar meja: 800 mm, panjang meja: 1.000 mm, tekanan kerja: 250 batang, Perlengkapan: dokumentasi / manual, penghadang cahaya keselamatan, CRONOSSTECH CHP 150 H-Frame Single-Acting Hydraulic Press – 8-Guided Slides General Description The CRONOSSTECH CHP series H-frame single-acting hydraulic presses are industrial presses with a rigid steel construction, designed for sheet metal forming, straightening, assembly, and die pressing applications. The H-frame structure with 8 guiding slides ensures stable, balanced, and repeatable operation during pressing. The CHP 150 model has been developed to deliver reliable performance and long-term use for medium tonnage applications. CHP Series – Structural Features CHP series presses are engineered with consideration for heavy-duty usage. The frame and supporting parts are stress-relieved through vibration. Bronze Zr14 guide bushings provide smooth load transfer and long-term stability. ⚙️ Standard Equipment • Steel construction, 8-slide guided H-frame press body • Stress-relieved frame and supporting parts by vibration • Bronze Zr14 guide bushings • TÜRK-AK accredited WPQR & WPS certified welding applications (EN ISO 15614-1:2017 / EN ISO 14731) • Machine design and production in compliance with CE standards • PLC-controlled hydraulic system • Touch panel display (DELTA 7”) Lodpjx N T Dzofx Aptsrn • Adjustable ram stroke and tonnage control • Automatic lubrication system • Electronically monitored filter contamination warning • On-screen monitoring of hydraulic unit oil temperature and system status • Cooling system • Off-line filtration • Two-hand control system • Light barrier (operator safety as standard) • SIEMENS – SCHNEIDER switchgear components 📐 Technical Specifications – CHP 150 Type: Steel construction, 8-slide guided H-frame press body Frame Material: St52 – ERDEMİR Guide Bearings: Bronze Zr14 Capacity (Ram): 150 Tons Moving Table Dimensions: 800 × 1000 mm Fixed Table Dimensions: 800 × 1000 mm Parallelism Tolerance: 120 micron/meter Perpendicularity Tolerance: 60 micron/meter Stroke (Ram): 500 mm Min. Daylight: 100 mm Max. Daylight: 600 mm Stress Relieving: Vibration stress relieving Welding Application: WPQR and WPS certified welding accredited by TÜRK-AK, in compliance with EN ISO 15614-1/2017, supervised by certified welding coordination engineers as per EN ISO 14731 Max. Working Pressure: 250 Bar Total Motor Power: 18.5 kW – IE3 Main Pump: 32 cm³ – REXROTH or PARKER Moving Table Fast Down Speed: 150 mm/sec Moving Table Pressing Speed: 12 mm/sec Moving Table Return Speed: 170 mm/sec Main Cylinder Internal Diameter: Ø280 mm – Ck45 Approx. Press Height: 3650 mm Approx. Press Width: 2950 mm Approx. Press Depth: 2000 mm Lower Table Height from Floor: 1250 mm Pre-fill Valve: NG 100 Hydraulic Power Unit: REXROTH or PARKER Cooling System: EMMEGI – CIESSE – PARKER Off-line Filtration: REXROTH or PARKER Linear Position Sensor: NOVATECHNIK or TURCK PLC Application: DELTA Touch Panel Display: DELTA 7” Switchgear Components: SIEMENS – SCHNEIDER Approximate Weight: 7 Tons Production Note This machine is manufactured in Turkey by CRONOSSTECH.

Kondisi: baru, Tahun pembuatan: 2025, gaya penekanan: 400 t, panjang langkah: 800 mm, lebar meja: 1.200 mm, panjang meja: 1.500 mm, tekanan kerja: 250 batang, Perlengkapan: dokumentasi / manual, penghadang cahaya keselamatan, CRONOSSTECH CHP 400 H-Type Single-Acting Hydraulic Press – 8-Guided General Description The CRONOSSTECH CHP series H-type single-acting hydraulic presses are robust industrial solutions designed for sheet metal forming, straightening, assembly, and die press applications. The 8-guided H-frame construction ensures even distribution of high loads during pressing, delivering stable and repeatable performance. The CHP 400 model is engineered to provide durable and reliable operation for heavy-duty applications requiring high tonnage. Ledpox N T Hpofx Aptsrn CHP Series – Structural Features CHP series presses are designed for demanding industrial use. The frame and supporting components are stress-relieved via vibration. Bronze Zr14 guide bushings allow for smooth load distribution during ram movement, contributing to long-term repeatability and precision. ⚙️ Standard Equipment - Steel construction, 8-guided H-frame press body - Stress-relieved frame and carrier parts via vibration - Bronze Zr14 guide bushings - WPQR & WPS welding procedures approved by TÜRK-AK-accredited bodies (EN ISO 15614-1:2017 / EN ISO 14731) - Machine structure designed and built in compliance with CE standards - PLC-controlled hydraulic system - 7” DELTA touchscreen panel - Adjustable ram stroke and tonnage control - Automatic lubrication system - Electronically monitored filter contamination warning - On-screen monitoring of hydraulic oil temperature and system status - Cooling system - Off-line filtration unit - Two-hand operation control - Light curtain (operator safety – standard) - SIEMENS – SCHNEIDER switchgear components 📐 Technical Specifications – CHP 400 Type: Steel construction, 8-guided H-frame press body Frame Material: St52 – ERDEMİR Guide Bushings: Bronze Zr14 Ram Capacity: 400 Tons Moving Table Dimensions: 1200 × 1500 mm Fixed Table Dimensions: 1200 × 1500 mm Parallelism Tolerance: 120 micron/meter Perpendicularity Tolerance: 60 micron/meter Ram Stroke: 800 mm Min. Daylight: 100 mm Max. Daylight: 900 mm Stress Relief: Vibration stress relief Welding Qualification: EN ISO 15614-1/2017, WPQR & WPS approved/certified by TÜRK-AK, supervised by certified welding coordinators (EN ISO 14731) Max. Working Pressure: 250 Bar Total Motor Power: 37 kW – IE3 Main Pump: 45 cm³ – REXROTH or PARKER Fast Descent Speed of Moving Table: 150 mm/s Pressing Speed of Moving Table: 12 mm/s Return Speed of Moving Table: 170 mm/s Main Cylinder Internal Diameter: Ø450 mm – Ck45 Auxiliary Acceleration Cylinders: 2 units Approximate Machine Height: 5600 mm Approximate Machine Width: 3250 mm Approximate Machine Depth: 2200 mm Lower Table Height from Ground: 1400 mm Pre-Fill Valve: NG 150 Hydraulic Unit: REXROTH or PARKER Cooling System: EMMEGI – CIESSE – PARKER Off-line Filtration: REXROTH or PARKER Linear Position Encoder: NOVATECHNIK or TURCK PLC Application: DELTA Touchscreen Panel: DELTA 7” Switchgear: SIEMENS – SCHNEIDER Approximate Weight: 19.5 Tons Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Kondisi: baru, Tahun pembuatan: 2025, gaya penekanan: 800 t, panjang langkah: 800 mm, lebar meja: 1.500 mm, panjang meja: 2.000 mm, tekanan kerja: 250 batang, Perlengkapan: dokumentasi / manual, penghadang cahaya keselamatan, CRONOSSTECH CHP 800 H-Type Single-Acting Hydraulic Press – 8-Guided General Description The CRONOSSTECH CHP series H-type single-acting hydraulic presses are designed for heavy-duty sheet metal forming, straightening, assembly, and high-tonnage pressing applications. The 8-guide H-frame structure ensures balanced distribution of high forces during pressing, providing maximum rigidity and long service life. The CHP 800 model has been developed to deliver reliable and stable performance for high-capacity production lines. CHP Series – Structural Features CHP series presses are engineered with consideration for heavy industrial conditions. The frame and main structural components are stress-relieved using vibratory methods. Bronze Zr14 guide bearings ensure even load distribution and precision operation throughout the ram movement. ⚙️ Standard Equipment - Steel construction, 8-guide H-frame press body - Stress-relieved frame via vibration - Bronze Zr14 guide bearings - WPQR & WPS approved welding in accordance with TÜRK-AK certified procedures (EN ISO 15614-1:2017 / EN ISO 14731) - Design and manufacturing in compliance with CE standards - PLC-controlled hydraulic system - 7” DELTA touchscreen panel - Adjustable ram stroke and tonnage control - Automatic lubrication system - Electronically monitored filter contamination warning - Real-time monitoring of hydraulic unit oil temperature and system status on screen Lodpfx Aox N T Nkeptsrn - Cooling system - Off-line filtration - Two-hand control system - Light curtain (operator safety standard) - SIEMENS – SCHNEIDER switching components 📐 Technical Specifications – CHP 800 Type: Steel construction, 8-guide H-frame press body Frame Material: St52 – ERDEMİR Guide Bearings: Bronze Zr14 Capacity (Ram): 800 Tons Moving Table Size: 1500 × 2000 mm Fixed Table Size: 1500 × 2000 mm Parallelism Tolerance: 120 microns/m Perpendicularity Tolerance: 60 microns/m Stroke (Ram): 800 mm Min. Daylight: 100 mm Max. Daylight: 900 mm Stress Relief: Vibratory stress relieving Welding Method: EN ISO 15614-1/2017 welding application certificate (approved by TÜRK-AK WPQR and WPS), supervised by certified welding coordination engineers per EN ISO 14731 Max. Operating Pressure: 250 Bar Total Motor Power: 75 kW – IE3 Main Pump: 70 cm³ – REXROTH or PARKER Moving Table Rapid Descent Speed: 150 mm/sec Moving Table Forming Speed: 12 mm/sec Moving Table Return Speed: 170 mm/sec Main Cylinder Inner Diameter: Ø390 mm – Ck45 (2 pcs) Auxiliary Acceleration Cylinders: 2 pcs Approx. Machine Height: 6000 mm Approx. Machine Width: 3350 mm Approx. Machine Depth: 2700 mm Table Height from Floor: 1450 mm Pre-fill Valve: NG 200 Hydraulic Unit: REXROTH or PARKER Cooling System: EMMEGI – CIESSE – PARKER Off-line Filtration: REXROTH or PARKER Linear Position Transducer: NOVATECHNIK or TURCK PLC: DELTA Touchscreen Panel: DELTA 7” Switchgear: SIEMENS – SCHNEIDER Approx. Weight: 45 Tons Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Kondisi: baru, Tahun pembuatan: 2025, gaya penekanan: 2.000 t, panjang langkah: 1.000 mm, lebar meja: 1.500 mm, panjang meja: 2.500 mm, tekanan kerja: 250 batang, Perlengkapan: dokumentasi / manual, penghadang cahaya keselamatan, CRONOSSTECH CHP 2000 H-Type Hydraulic Press – 8 Guideways General Description The CRONOSSTECH CHP series H-type hydraulic presses are designed for heavy-duty forming, deep drawing, spinning, and die applications that require very high tonnage. The 8-guideway H-frame structure provides maximum rigidity during pressing operations, maintaining parallelism and perpendicularity tolerances throughout the entire long stroke. The CHP 2000 model, with its large table dimensions, high-capacity hydraulic system, and robust motor, is a reliable and long-lasting solution for the automotive, defense, heavy industry, and high-tonnage production lines. The frame structure is stress-relieved by vibration to ensure stable operation. ⚙️ Standard Equipment - Welded steel construction, H-frame body with 8 guideways - Stress-relieved frame structure via vibration - Bronze Zr14 guide bushings - WPQR and WPS certified welding applications, accredited by TÜRK-AK (EN ISO 15614-1:2017 / EN ISO 14731) - Design and manufacturing in compliance with CE standards - PLC controlled hydraulic system - 7” DELTA touchscreen panel - Adjustable ram stroke and tonnage control - Automatic lubrication system - Electronic filter contamination monitoring - Hydraulic power unit oil temperature and system status monitoring on display - Cooling system - Off-line filtration - Safety systems for operator protection - SIEMENS – SCHNEIDER electrical components 📐 Technical Specifications – CHP 2000 - Type: Welded steel construction, H-frame body with 8 guideways - Frame Material: St52 – ERDEMİR - Guideway Bushings: Bronze Zr14 - Capacity (Ram): 2000 Tons - Moving Table Size: 1500 × 2500 mm - Fixed Table Size: 1500 × 2500 mm - Parallelism Tolerance: 120 micron/meter - Perpendicularity Tolerance: 60 micron/meter - Stroke (Ram): 1000 mm - Min. Daylight: 200 mm - Max. Daylight: 1200 mm - Stress Relief: Vibratory stress relief - Welding Application: WPQR and WPS certified, accredited by TÜRK-AK, EN ISO 15614-1:2017 - Max. Operating Pressure: 250 Bar - Total Motor Power: 180 kW – IE3 - Main Pump: 140 cm³ – REXROTH or PARKER - Moving Table Rapid Down Speed: 150 mm/sec - Moving Table Drawing Speed: 12 mm/sec - Moving Table Return Speed: 170 mm/sec - Main Cylinder Bore: Ø720 mm – Ck45 (2 units) - Auxiliary Speed-Up Cylinders: 2 units Lredpfsx N T Srjx Aptsn - Approx. Height: 6300 mm - Approx. Width: 3850 mm - Approx. Depth: 2500 mm - Table Height from Floor: 1500 mm - Pre-fill Valve: NG 200 - Hydraulic Power Unit: REXROTH or PARKER - Cooling System: EMMEGI – CIESSE – PARKER - Off-line Filtration: REXROTH or PARKER - Linear Position Transducer: NOVATECHNIK or TURCK - PLC System: DELTA - Touchscreen Panel: DELTA 7” - Electrical Components: SIEMENS – SCHNEIDER - Approximate Weight: 95 Tons Production Note This machine is manufactured in Turkey by CRONOSSTECH.

Kondisi: baru, Tahun pembuatan: 2025, gaya penekanan: 300 t, panjang langkah: 600 mm, lebar meja: 1.000 mm, panjang meja: 1.200 mm, tekanan kerja: 250 batang, Perlengkapan: dokumentasi / manual, penghadang cahaya keselamatan, CRONOSSTECH CHP 300 H-Frame Single-Acting Hydraulic Press - 8-Guided Slides General Description The CRONOSSTECH CHP series H-frame single-acting hydraulic presses are industrial solutions engineered for high rigidity in sheet metal forming, straightening, assembly, and die pressing applications. Thanks to the 8-guide H-frame construction, the high loads generated during pressing are evenly distributed, providing stable and repeatable operation. The CHP 300 model is designed to deliver durable and reliable performance for medium to high tonnage production processes. CHP Series – Structural Features CHP series presses are designed for heavy-duty operations. The frame and support components are stress-relieved via vibration. Bronze Zr14 slide bearings ensure uniform load distribution during ram movement, helping to maintain long-term precision. ⚙️ Standard Equipment Lodpfx Apex N T E Eetjrn - Steel construction, 8-guide H-frame press body - Stress-relieved frame and support parts via vibration - Bronze Zr14 slide bearings - WPQR & WPS certified welding (with TÜRK-AK accreditation) (EN ISO 15614-1:2017 / EN ISO 14731) - Machine structure designed and manufactured in compliance with CE standards - PLC-controlled hydraulic system - 7” DELTA touch panel display - Adjustable ram stroke and tonnage control - Automatic lubrication system - Electronically controlled filter contamination warning - On-screen display of hydraulic unit oil temperature and system status - Cooling system - Off-line filtration - Two-hand control system - Light curtain (standard for operator safety) - SIEMENS – SCHNEIDER electrical components 📐 Technical Specifications – CHP 300 Type: Steel construction, 8-guide H-frame body Frame Material: St52 – ERDEMIR Slide Bearing: Bronze Zr14 Capacity (Ram): 300 tons Movable Table Dimensions: 1000 × 1200 mm Fixed Table Dimensions: 1000 × 1200 mm Parallelism Tolerance: 120 micron/m Squareness Tolerance: 60 micron/m Ram Stroke: 600 mm Min. Daylight: 100 mm Max. Daylight: 700 mm Weld Stress Relief: Vibration method Welding Certification: WPQR & WPS certified by TÜRK-AK, meeting EN ISO 15614-1/2017, supervised by welding coordination engineers certified according to EN ISO 14731 Max. Working Pressure: 250 Bar Total Motor Power: 37 kW – IE3 Main Pump: 45 cm³ – REXROTH or PARKER Movable Table Fast Descent Speed: 150 mm/sec Movable Table Pressing Speed: 12 mm/sec Movable Table Return Speed: 170 mm/sec Main Cylinder Bore: Ø390 mm – Ck45 Auxiliary Acceleration Cylinders: 2 pcs. Approximate Machine Height: 4400 mm Approximate Machine Width: 3250 mm Approximate Machine Depth: 2200 mm Lower Table Height from Floor: 1350 mm Main Pre-fill Valve: NG 150 Hydraulic Unit: REXROTH or PARKER Cooling System: EMMEGI – CIESSE – PARKER Off-line Filtration: REXROTH or PARKER Linear Distance Encoder: NOVATECHNIK or TURCK PLC: DELTA Touch Panel: DELTA 7” Electrical Components: SIEMENS – SCHNEIDER Approximate Weight: 10.5 Tons Production Note This machine is manufactured by CRONOSSTECH in Turkey.