Beli Heesemann Sander Sabuk Lebar bekas (10.146)

Kondisi: sangat baik (bekas), CATALOG NO. 5799 TECHNICAL DATA - Maximum workpiece width: 230 mm - Maximum workpiece height: 140 mm - Minimum workpiece length: 300 mm - 2 sanding units: - Top and bottom + pads * From above: - 2 pressure rollers, sliding, metal - Pressure - Sanding unit: 2 metal rollers + pad - Sliding pressure roller - Feed belt * From below: - Feed belt - 2 metal rollers, sliding, smooth - Pressure - Sanding unit: 2 metal rollers + pad - 3 metal rollers, sliding, smooth - Electrically adjustable sanding height - Oscillation of sanding belts - Pneumatic cleaning of belts - Continuously variable feed speed via inverter: 3-15 m/min - Feed motors: 2×0.37 kW - Main motors: - Top – 5.5 kW - Bottom – approx. 5.5 kW - Air requirement: 6-8 bar - Extraction port diameter: 4x100 mm - Overall dimensions (L/W/H): 2340x1420x1920 mm - Weight: 1480 kg – Suitable for short workpieces (belts overlap) – German-made Gjdpfx Aiezkrxko Aobp – Very good condition – Unpainted – Used sander Net price: 22,900 PLN Net price: 5,450 EUR Net price calculated at exchange rate 4.2 PLN/EUR (in case of significant exchange rate fluctuations, the price may change)

Kondisi: baru, Tahun pembuatan: 2026, CASADEI Libra 35 - Wide Belt Sander, Twin-Belt Configuration Available immediately - Ex-stock 54634 Bitburg Technical Data Sanding width: 1100 mm Min. / max. working height: 4 /170 mm Abrasive belt width: 1115 mm Abrasive belt length: 1900 mm Feed speeds: 4.5 / 9 m/min Feed motor: 0.33/0.55 kW Table elevation motor output: 0.25 kW Main drive motor power: 11 kW Electrical voltage: 400 V Phase(s): 3 Ph Mains frequency: 50 Hz Length: 1650 mm Width/Depth: 1820 mm Height: 1960 mm Image shows optional equipment Wide belt sander in twin-belt design up to 1100 mm with a wide range of options—ideal for cost-conscious craft businesses Robust, tubular-reinforced monoblock steel machine body with high-mounted working units for maximum rigidity Operator-friendly, clearly arranged control panel on the front Electrically powered table height adjustment Digital display for working height Electronically controlled belt oscillation with reduced compressed air requirement Automatic star-delta main motor start Natural rubber feed belt with negative profile Support table with two rollers at infeed and outfeed of the feed belt Feed belt driven by geared motor with two speeds Flexible steel pressure bar in front of the first unit Rubber pressure rollers before and after each working unit Pneumatic belt tensioning for each unit with decimal adjustment for grit/belt thickness Quality – made in Europe RTC Version 1st unit with grooved steel roller Ø 120 mm and fine adjustment for calibration 2nd unit: combination unit with finely adjustable working height for calibration and fine sanding, featuring a rubber-coated roller Ø 120 mm (45 Sh) and hard sanding pad with graphite insert on replaceable base Scope of delivery: Work table height adjustment with digital display Electronic sanding belt oscillation system Rubber-coated grooved pressure roller at infeed 1st position with anti-reversal lock (C.E.) Star-delta main motor start Grooved calibration steel roller Selector switch for sanding pad positioning from the control panel Accessories: - Semi-hard flat sanding shoe - Automatic belt centering Location: Ex-stock Bitburg – special price Gjdpfx Aijcr S Ecj Ajbp

Kondisi: baru, Tahun pembuatan: 2026, Kündig Perfect-2 1350 RED-L Wide Belt Sander incl. paint intermediate sanding configuration Special price for display machine – showroom machine – - Robust, space-saving wide belt sander for the highest demands. - Constant working height due to upper part adjustment - Working width: 1350 mm - Top sanding, with 2 sanding units - Grooved rubber contact roller with proven hardness - Stepless height adjustment of the contact roller based on a sanding grit scale - Electric raising/lowering of the contact roller according to unit selection - Electronically controlled segmented sanding pad - Entire sanding pad unit tiltable by 10 degrees - Parallel spring-loaded, ground steel pressure roller at the infeed - Rubberized pressure roller between sanding units and at outfeed - 2 motors: 18.5 kW and 11 kW, 400 Volt, 50 Hz - Motorized fine height adjustment with digital display - Belt tensioning, control and oscillation pneumatic Compressed air consumption approx. 2 l/min - Optimum safety thanks to automatic emergency stop with disc brake in case of belt breakage, etc. - Workpiece feed 2.2 kW with conveyor belt and drive roller - Vacuum system for the entire working table with additional perforation over 200 mm for smaller workpieces - Automatic thickness setting across the entire working width - Workpiece thickness overrun protection with immediate feed stop and automatic lift-up - Infinitely variable chip removal - Electronic feed control on the control panel, stepless from 3 - 15 m/min - PLC control with teach-in memory - Pneumatic conveyor control - Workpiece support with roller at infeed and outfeed - Enormatic: Fully automatic quick setup and feed activation - eco power-saving mode - Error diagnostics - Pass-through height up to 210 mm (up to 18.5 kW) - Sanding belt size: 1350 x 2000 mm Perfect - Equipment: High-quality swivel-mounted plexiglass control panel - 10" touch screen - Industrial control - Automatic pressure control and memory of sanding pad segments - Electronic compensation for sanding belt grit size Gsdpfxjk Dpp Ss Ai Ajbp - Job and operating hour counter Lacquer Equipment: - Infinitely adjustable sanding belt speed on 2nd unit - Jet nozzles for sanding belt cleaning on 2nd unit, usage-controlled - Electronic sanding pad with 22 mm segment width - Additional sanding pad insert Additional options included with this machine: Foldable outfeed table extension (without panel) C10) LED package ASB5+AS3) ECS workpiece air-jet cleaning with fan Location: 54634 Bitburg - available immediately -

Kondisi: sangat baik (bekas), Nomor katalog: 8036 SPESIFIKASI TEKNIS Lebar maksimum benda kerja: 1100 mm Tinggi maksimum benda kerja: 170 mm 2 unit pengolah: – Dari atas: roller karet, penekan, beralur tambahan: 1) silinder logam beralur untuk pengkalibrasian roller karet, penekan 2) silinder karet beralur + sepatu sekuensial otomatis + silinder logam roller karet, penekan Total daya unit pengolah: 15 kW – Dari bawah: 2 roller karet, anti-selip sabuk penarik 2 roller karet, anti-selip potensiometer pengaturan ketebalan pengamplasan pembersihan otomatis pada sabuk osilasi sabuk secara pneumatik dengan sensor fotolistrik Gbodpfx Aiozin Sdo Aep pengaturan ketinggian meja secara elektrik + manual (untuk penyetelan presisi) 2 tingkat kecepatan feeding Daya motor feeding: 0,3 kW Dengan rem pneumatik Tekanan kerja: 6–8 bar Diameter nozzle penghisap debu: 2x140 mm Dimensi keseluruhan (P x L x T): 1840 x 1650 x 2000 mm Berat: 1160 kg - Tanpa cat - Produksi Italia - Sepatu sekuensial otomatis - 2 unit pengolah - Potensiometer pengukuran ketebalan pengamplasan - Dokumentasi DTR - Mesin bekas, kondisi sangat baik Harga netto: 48.900 PLN Harga netto: 11.640 EUR (berdasarkan kurs 4,2 EUR) (Harga dapat berubah sesuai fluktuasi valuta)

Kondisi: sangat baik (bekas), CATALOG NO. 6916 TECHNICAL DATA Gbsdozh H Twepfx Ai Aop - Maximum working width: 200 mm - Maximum working height: 150 mm - 2 sanding units: Upper – steel roller + pad + steel roller Lower – steel roller + pad + steel roller From above: - Pressure roller, steel - Sanding unit - Sliding pressure roller, steel - Cleaning brush - Feed belt From below: - Feed belt - 2 smooth, sliding steel rollers - Sanding unit - Pressure roller, steel - Cleaning brush - Discharge roller - Electrically adjustable sanding height - Pneumatic belt oscillation - Stepless feed speed adjustment - Feed motors: 0.55 kW - Main motors: 2 x 4 kW - Air supply requirement: 6–8 bar - Extraction port diameter: 3 x 80 mm, 1 x 120 mm - Overall dimensions (L x W x H): 1800 x 2070 x 2000 mm - Weight: 1422 kg – German-made – Not repainted – Very good condition – Used sander Net price: 25,900 PLN Net price: 6,160 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (price may change with significant exchange rate fluctuations)

Kondisi: sangat baik (bekas), NOMOR KATALOG: 6985 Gbodpfxjzh H I Ij Ai Aep DATA TEKNIS - lebar maksimum benda kerja: 300 mm - tinggi maksimum benda kerja: 200 mm - agregat: rol karet beralur + sepatu + rol logam - meja kerja: 1230x440 mm - sabuk: 300x1900 mm Dari atas: - rol karet anti-selip - agregat sekitar 7,5 kW - rol karet anti-selip Dari bawah: - sabuk penarik - osilasi pneumatis - 2 kecepatan maju - motor feeding 0,85 kW - diameter nozzle ekstraksi: 110 mm - dimensi (P/L/T): 1250/1000/1950 mm - berat: 530 kg – belum dicat ulang – mesin amplas bekas – kondisi sangat baik Harga netto: 13.900 PLN Harga netto: 3.300 EUR Harga netto dihitung berdasarkan kurs 4,2 PLN/EUR (jika terjadi fluktuasi kurs yang signifikan, harga dapat berubah)

Kondisi: sangat baik (bekas), Wide Belt Sander for Calibration and Fine Sanding SCM Model RCS 1st Unit: Calibration roller, steel 2nd Unit: Combination unit (60 Sh roller, sanding pad with 2 inserts (hard, soft)) Gsdsxqggcopfx Ai Aebp Working width: 920 mm Abrasive belt dimensions: 930 x 1,525 mm Motor power: 11.0 kW, 400 V, 50 Hz Feed motor power: 0.37 kW, 400 V, 50 Hz 2 feed speeds Electromotive table height adjustment Main switch lockable 2 x emergency stop Table extensions with 2 rollers, front and rear Sanding shoe inserts lined with new graphite cloth Including as-new sanding belts Incl. all documentation Note on used machinery: • Subject to errors in technical specifications and prior sale. • Quoted prices are ex-location – loaded free of charge! • The machines have been cleaned and functionality tested. • All machines are sold as inspected, with no guarantee or warranty of any kind. Buyers are welcome to inspect the machines on-site. • Special agreements are only valid if made in writing. (We only respond to inquiries stating your address and telephone number!)

Kondisi: sangat baik (bekas), Calibrating and Fine Grinding Machine with 1 Grinding Unit, 1 Motor, Processing from Above Gjdpsudxchsfx Ai Ajbp Working width: 1000 mm Abrasive belt dimensions: 2200 x 1030 mm Workpiece dimensions: 3 - 170 mm Table height adjustment motor: 0.18 kW, 400 V, 50 Hz Main motor: 7.5 kW, 400 V, 50 Hz 2 feed speeds: 5.5 & 11 m/min 1st Unit: Combination unit, grinding roller, rubber-coated, 90 Shore / pneumatically operated sanding pad Sanding pad NEW 2nd Unit: Cleaning brush Compressed air requirement: approx. 6 bar Extraction port diameter: 200 mm Approximate dimensions L x W x H: 1385 x 1980 x 1900 mm Weight: approx. 1800 kg Automatic workpiece thickness adjustment with digital display Abrasive belt oscillation Emergency stop for sanding belt with disc brakes Table extension with 3 exit rollers Emergency stop button Main switch CONVEYOR BELT AS NEW – replaced by us approx. 3 years ago MORE THAN 30 PCS WIDE BELT SANDING BELTS INCLUDED Note on used machines: • Technical specifications subject to error and prior sale. • Prices quoted are ex-works – free loading! • The machine has been cleaned and function tested. • All machines are sold as inspected, without any warranty claims. Buyers are welcome to inspect the machines on site. • Special agreements are only valid in written form. (We will only respond to inquiries including your address and telephone number!)

Kondisi: sangat baik (bekas), Wide belt sander for calibration and fine sanding Working width: 1100 mm Gbodpfxstwzyfs Ai Aop Min./max. workpiece height: 3 - 120 mm Feed motor power: 0.8 kW Abrasive belt speed: 18 m/sec Abrasive belt size: 1115 x 2620 mm Feed rate: 4.5 / 9 m/min Extraction connection: 3 x 160 mm Compressed air connection: 6 bar 1st unit: Sanding drum Rubber-coated, 90 Shore Motor power: 11 kW 2nd unit: Combination unit Sanding drum, rubber-coated, 60 Shore Sanding pad, rigid Motor power: 11 kW 3rd unit: Cleaning brush Automatic workpiece thickness adjustment at infeed with digital thickness display Outfeed table extension Dimensions (approx. L x W x H): 2291 x 1784 x 2350 mm Weight (approx.): 3000 kg Note on used machines: • Specifications and prior sale subject to change. • Prices quoted are ex works – free loading! • The machine has been cleaned and function tested. • All machines are sold as inspected, without any guarantee or warranty. Buyers are free to inspect the machines at their location. • Special agreements are only valid in written form. (We only respond to inquiries with your full address and telephone number!)

Kondisi: baru, Wide belt sander for calibration and fine sanding Working width mm: 1,100 Min./Max. working height mm: 4/170 Abrasive belt width mm: 1,115 Abrasive belt length mm: 2,150 Gear motor kW: 2.2 Feed speed m/min: variable Infeed and outfeed support rollers for long and short workpieces Oscillating belt cleaning blower 1st unit Oscillating belt cleaning blower 2nd unit Oscillating belt cleaning blower 3rd unit 10" touch screen control panel "eye-S" 1st unit: steel roller 2nd unit: rubber-coated calibration roller 85SH 3rd unit: combination unit with pneumatic segmented sanding pad/ rubber-coated sanding roller 35SH Motor power 1st unit kW: 18.5 Motor power 2nd & 3rd unit kW: 18.5 Version "B" for RRCS with: pneumatic on/off for 1st unit Gedpfx Asitvkuoi Ajbp pneumatic on/off for 2nd unit pneumatic on/off for 3rd unit “MESAR” elastic segmented sanding pad pneumatic on/off for sanding pad unit electronic adjustment of working height SPECIAL PRICE! IMMEDIATELY AVAILABLE!

Kondisi: baru, Technical Specifications: Working width mm: 1,350 Min./max. working height mm: 4 - 170 Sanding belt width/length mm: 1,370 / 2,620 Main motor power kW: 18.5 with inverter Feed speed variable m/min: 3.5 - 18 Working Units: 1st Unit: "RA" angled-ribbed contact roller, Sh 86, diameter 160 mm 2nd Unit (Combi): Rubber-coated sanding roller, diameter 160 mm, 45 Sh Elastic electronic segmented pad "MESAR" with 24 segments Version C: - Elastic electronic segmented pad "MESAR" complete with: - Pneumatic cylinder (on/off) for automatic engage/disengage of the sanding roller and pad unit - Sector activation via electronic control, synchronizing engagement with feed speed and regulating the number of active segments depending on the workpiece geometry. Allows selection of more or fewer segments on the left and right sides of the workpiece. - Versions 135: "MESAR 24" with 24 segments, segment width 55 mm, complete with B/24 workpiece sensing bar at the infeed. Gbsdpfx Ajhtuvrji Aop Additional features: Roller table at infeed and outfeed for long workpieces Perforated table and conveyor belt Vacuum table with integrated electric fan 4 kW (5.5 HP) in the machine frame Oscillating blow-off device at the 2nd unit 10.4” touchscreen monitor with 'eye S software integration' NOTE: IMAGES ARE SAMPLE IMAGES OF A SIMILAR SD70!

Kondisi: baru, DMC SD 90 RCS 135 Version “C-Plus” Technical Data Useful working width: 1350 mm Min./max. working height (with fixed table): 4 – 200 mm Abrasive belts: 1,370 x 2,620 mm Feed speed: 3.5–18 m/min Working Units: • “MESAR 46” elastic electronic segmented sanding shoe with 46 sectors (30 mm), including B/46 workpiece sensing bar at infeed • 1st position: “RA” diagonally grooved steel contact roller, D=250 mm • 2nd position: COMBI with rubber-coated sanding roller, D=175 mm, 65 Sh • Floating pressure shoe in the 1st position with pneumatic adjustment • 2 grooved rubber-coated pressure rollers in 2nd and 3rd position • Oscillating blow-off device for 1st and 2nd unit • Workpiece cleaning unit with rotating air nozzles Power: • 1st unit motor: 18.5 kW • 2nd unit motor with inverter: 15 kW Table: • Fixed table, working height 900 mm • Roller table at infeed for long workpieces Gsdpfx Aed E Ixzsi Aobp • Roller table at outfeed for long workpieces • Perforated table and conveyor belt, 50 Sh • Vacuum table with 4 kW electric fan integrated in machine frame • Infinitely variable belt feed from 3.5–18 m/min (geared motor 0.75 kW) Control: • Electronic programming unit “Pro-Sand” • Touch screen, 10.4” display • Door with viewing window on setup side for machine with 2 working units • LED interior lighting Disclaimer for Used Machines: • Subject to errors in technical details and prior sale. • Quoted prices are ex works, loaded free onto transport. • The machines have been cleaned and functionally tested. • All machines are sold as inspected, with no claim to warranty. Buyers are welcome to inspect the machines onsite. • Special arrangements are only valid in written form. (We answer inquiries only with your full address and telephone number!)

Kondisi: sangat baik (bekas), Working width 110 cm First unit: steel Second unit: combined, rubber roller plus shoe Pneumatic belt cleaning Pneumatic oscillation via photocells Electric table height adjustment (up/down) Pneumatic belt tensioning Two feed speeds Abrasive belt: 2200 x 1130 mm 400 V 12 kW motor 1542 kg Gjdpfx Aisw Drb Uj Ajbp Year 2004

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1977, Wide belt sanding machine Bütfering see pictures Machine is immediately available The machine was in use in production without any issues until just a few days ago, Gbodpfx Aiondccts Aep but was used only very rarely.

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2023, Fungsionalitas: berfungsi sepenuhnya, lebar penggilingan: 1.350 mm, SCM wide-belt calibration and fine sanding machine Model: dmc sd 60 RCS 135 Technical Specifications: Working width: 1,100 mm Min./Max. working height: 4–170 mm Abrasive belt width: 1,120 mm Abrasive belt length: 2,150 mm Main motor power: 11 (15) kW (HP) Gear motor: 0.45/0.8 (0.6/1.1) kW (HP) Feed speed: 4.5/9 m/min Standard Equipment: - R140/85 rubber-coated calibration roller, diameter 140 mm, 85 Shore—1st position - R160/45 rubber-coated sanding roller, diameter 160 mm, 45 Shore—2nd position Gbjdpfx Aiotwqn So Asp - Hard sanding pad with manual working height adjustment - 1st unit motor power: 11 kW (15 HP) - Electronic ammeter for the main motor to display power consumption - Electronic display for working height - Electronically controlled abrasive belt oscillation - Rubber pressure rollers - Anti-kickback device at infeed before the first unit - 60 Shore rubber feed belt - Roller table with two rollers at the infeed and outfeed of the working table - Feed belt with two speeds: 4.5 / 9 m/min with gear motor - Automatic belt centering Includes the following special accessories: 1 pc. Version "B" for RCS with: pneumatic activation/deactivation of roller 1st unit “R” + pneumatic activation/deactivation of roller 2nd unit “CS” + "MESAR" elastic segmented sanding shoe + pneumatic activation/deactivation of the sanding shoe unit + electronic programming unit "LOGIC 50" + electronic working height adjustment 1 pc. CE safety regulations 1 pc. Roller table at infeed and outfeed for long workpieces, equipped with 5 non-driven rollers 1 pc. "RA" helical-ribbed steel contact roller 1st unit 1 pc. Main motor 15 kW 1 pc. Abrasive belt wear optimizer 1 pc. LED interior lighting 1 pc. Door with inspection window at the rear 1 pc. Logic SC control

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 1987, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 9673240, lebar penggilingan: 1.100 mm, daya: 15 kW (20,39 hp), jenis penyesuaian ketinggian: listrik, panjang sabuk penggiling: 1.900 mm, sambungan udara terkompresi: 6 batang, lebar sabuk penghalus: 1.120 mm, Combination sanding unit with contact roller and air sanding pad Brush roller Pneumatic sanding belt tensioning, motorized thickness adjustment Technical data: Max. working width: 1100 mm Max. workpiece thickness: 150 mm Min. workpiece thickness: 3 mm Gbodpetppzvsfx Ai Ajp Sanding belt dimensions: 1900 x 1120 mm Feed speed: 5/10 m/min Sanding unit motor power: 15 kW Height adjustment motor power: 0.50 kW Feed conveyor motor power: 0.5/1.0 kW Operating pressure: 6 bar Air consumption: approx. 20 l/min Extraction connection: 2 x 200 mm Weight: approx. 2100 kg Machine width: approx. 1750 mm Machine depth: approx. 1700 mm Machine height: approx. 1900 mm

Kondisi: bekas, Tahun pembuatan: 1986, Maks. lebar kerja: 1300 mm Jumlah sabuk: 3 sabuk Unit 1: unit sepatu Diameter rol 1: 100 mm Tipe unit 1: rol baja/sepatu Unit 2: rol/sepatu Diameter rol 2: 100 mm Tipe unit 2: rol baja Unit 3: rol/sepatu Diameter rol 3: 100 mm Tipe rol 3: rol baja beralur Sepatu pengamplas unit 3: segmen individual elektronik Sikat pembersih: Ya Pengamplasan untuk permukaan berlapis/finishing: Ya Peniup sabuk: Ya Karpet vakum: Ya Lokasi gudang: Nattheim Godpjvvki Njfx Ai Aebp

Kondisi: bekas, Tahun pembuatan: 1997, Jumlah sabuk: 1 sabuk Maks. tinggi lewat: 150 mm Maks. lebar kerja: 1100 mm Unit 1: Unit kombinasi Godpfx Aisvvkkae Asbp Diameter rol 1: Rol baja Jenis unit 1: Unit rol/pad Pad pengamplas unit 1: segmen elektronik individual, lebar segmen 50 mm Panjang sabuk amplas unit 1: 1900 mm Lebar sabuk amplas unit 1: 1120 mm Daya motor (kW) kecepatan pengumpanan: 4 dan 8 m/menit Unit 2: sikat debu Berat sekitar: 2000 kg Dimensi: 1800 x 1450 x 2120 mm Lokasi gudang: Nattheim

Kondisi: baik (bekas), Tahun pembuatan: 1995, Mehrzweck-Flaechenschleifautomat Gsdpfjgnnbvox Ai Asbp

Kondisi: bekas, Tahun pembuatan: 2001, Used machine Year of manufacture: 2001 Features and technical specifications: - Constant working height - Equipped with a combination unit with steel contact roller and electronic CPS segmented pressure beam with 25 mm spacing - Sanding width: 1100 mm - Sanding belt length: 1900 mm - Workpiece thickness min./max.: 3 - 150 mm - Feed speed: infinitely variable, 2.5 - 13 m/min - Sanding unit: 11 kW Lacquer package features: - Infinitely variable belt drive speed via frequency inverter - Belt cleaning/blowing device Godpfx Aiswka Sne Aebp - Vacuum conveyor belt with blower Control system: - Terminal with 50 program memory slots - Simple menu navigation with clear text display - Visual indicator of active components during operation - Fully automatic PLC-controlled start sequence for all drives - Digital operating time recording - With cleaning brush - Roller table at infeed - Roller table at outfeed - Extraction capacity 1850 m³/h - Extraction ports: 1 x 180 mm, 1 x 140 mm, 2 x 100 mm - Compressed air connection: 6-8 bar - Air consumption: 10 l/min Weight: 2200 kg Availability: by arrangement Location: Röllbach

Kondisi: bekas, Tahun pembuatan: 1983, Used machine Year of manufacture: 1983 Condition: fully checked and serviced, including new feed belt Equipment and technical specifications: - Including combination unit with contact roller and sanding pad - Height-adjustable contact roller for calibration - Air cushion pressure shoe controlled by the workpiece - 4-position adjustable grit compensation - Pneumatic belt tensioning device - Rotating cleaning brush at the machine's outfeed side - Belt oscillation monitored via photoelectric sensor for automatic supervision and control of lateral belt tracking, ensuring consistent belt wear - Roller table at machine infeed - Digital display for the electrically driven workpiece thickness adjustment - Additional veneer sanding beam Gbedpewka T Sofx Ai Aep - 2x spare sanding pads included - Sanding width: 1350 mm - Sanding belt length: 1900 mm - Passage height: 150 mm - Main motor: 15 kW - Feed speed steplessly adjustable 2.5 - 12.5 m/min - Extraction ports: 2 x 200 mm Dimensions: approx. 2300 x 2000 x 2300 mm Weight: approx. 2300 kg Availability: short-term Location: 63934 Röllbach

Kondisi: bekas, Tahun pembuatan: 2001, Mesin bekas Gedjwka S Ujpfx Ai Aobp Tahun pembuatan: 2001 Perlengkapan dan data teknis: Lebar pengamplasan: 1100 mm Panjang sabuk amplas: 1900 mm Tebal benda kerja: 3-150 mm Kecepatan maju: variabel 2,5 - 13 m/menit 1 rol kontak baja 1 rol kontak berlapis karet 1 unit sepatu pengamplasan: dengan sepatu pengamplasan bantalan udara Penggerak: Agregat pengamplasan 1: 15 kW Agregat pengamplasan 2: 15 kW Agregat pengamplasan 3: 11 kW Dengan perpanjangan meja di sisi masuk Dengan perpanjangan meja di sisi keluar Daya total terpasang: 43 kW Kapasitas hisap: sekitar 6750 m³/h Kecepatan udara: 20 m/s Koneksi udara tekan: 6-8 bar Kebutuhan udara: sekitar 30 l/menit Dimensi: 1750 x 2740 x 1890 mm Berat: 3100 kg Ketersediaan: segera Lokasi: 65439 Flörsheim

Kondisi: baru, Tahun pembuatan: 2024, New machine Year of manufacture: 2024 2-Belt Wide Belt Sander - Usable working width: 1100 mm - Sanding belt dimensions: 1120 x 2150 mm - Max. workpiece thickness: 160 mm - Steel calibration roller Art. 018: 150 mm - Sanding shoe width: 50 mm - Motor power: 14.7 kW - Belt speed: 18/16 m/s - Feed motor power: 0.55 kW - Adjustable feed conveyor with stepless speed adjustment: 4/20 m/min - Motorized height adjustment: 0.24 kW - Mechanical belt oscillation “ECO GEAR PATENT SYSTEM” - 1 pc drum brake for belt stop - Pivoting roller for belt tensioning - 3 pcs pressure rollers with rubber coating - Emergency stop bar at machine infeed - Electronic display for workpiece thickness - 2 extraction ports Ø 160 mm - Automatic table positioning Gedpsxz Ialsfx Ai Asbp Optional equipment: - Electronically segmented sanding shoe, 20 segments - Increased belt motor power 14.7 kW instead of 11 kW - Frequency-controlled feed speed - Electronic machine function control with 7" touchscreen BASE MACHINE ACCORDING TO CE STANDARDS Art. 029 PLEASE NOTE: New patented belt oscillation system 1. No valves 2. No photoelectric barriers 3. Not sensitive to dust 4. Energy-saving, environmentally friendly system Availability: short-term Location: Holm

Kondisi: baru, Tahun pembuatan: 2024, en Gbsdpfx Asw Naanei Aep

Kondisi: bekas, Tahun pembuatan: 1991, Mesin bekas Tahun pembuatan: 1991 Mesin telah diservis dan diperiksa secara menyeluruh Lebar kerja: 1100 mm Tinggi kerja: 140 mm Pengaturan tinggi: elektrik Tampilan ketebalan benda kerja: digital Unit: 2 Unit 1: Unit kombinasi (rol - sepatu) dengan sepatu amplas segmen elektronik Unit 2: Unit sepatu, sepatu segmen elektronik Dengan sabuk transport vakum Sikat penghilang debu: ya Daya motor: 2 x 15 kW Gsdpsw I U N Iefx Ai Aebp Konsumsi arus: 65A Koneksi ekstraksi: 4 x 200 mm Belt amplas: 1120 x 1900 Berat: 3500 kg Ketersediaan: segera Lokasi penyimpanan: Hochheim