Beli Hertz Hgs 15F bekas (178)

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2022, Daya: 15kW, kecepatan poros maks.: 3000/menit, kapasitas oli: 6 l, kapasitas tangki: 500 l, tekanan kerja: 10 bar, kapasitas: 2,2 m³/menit, panel kontrol: Logik 9, panjang: 1915 mm, lebar: 650 mm, tinggi: 1640 mm, berat: 530 kg, jam operasional: 2 jam, dengan pemisah oli-air Wortmann drukosep 2. Inspeksi di lokasi memungkinkan. Iodpfszhw Rtsx Aa Djid

Kondisi: hampir baru (bekas), Tahun pembuatan: 2022, jam operasional: 20 h, Fungsionalitas: berfungsi sepenuhnya, berat keseluruhan: 475 kg, panjang total: 1.890 mm, lebar total: 720 mm, tinggi total: 1.600 mm, daya: 15 kW (20,39 hp), jenis bahan bakar: listrik, laju aliran volumetrik: 110 m³/jam, tekanan kerja: 10 batang, tekanan (min.): 8 batang, tekanan (maks.): 13 batang, jenis pendinginan: udara, Perlengkapan: Pelat tipe tersedia, pengering pendingin, Hertz HGS F 15 Kompakt (10 bar) Screw Compressor Free Air Delivery: 2.2 m³/min - Energy-efficient IE3 motor with star-delta start Iijdpfx Aajwum N Io Djd - 500-litre compressed air receiver - AD2000 certificate - Integrated refrigerated dryer - Pre- and after-filter - Automatic condensate drain - Digital control system Logic 9 Delivery of the compressor within a 200 km radius of our company headquarters is possible upon request. Delivery costs to be agreed upon.

Kondisi: bekas, Tahun pembuatan: 2019, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: VD004489, daya: 45 kW (61,18 hp), tekanan kerja: 10 batang, jenis pendinginan: udara, Perlengkapan: Pelat tipe tersedia, kompresor, sistem udara terkompresi, Kompresor Hertz Frecon Plus 45 adalah peralatan industri berkinerja tinggi yang dirancang untuk memenuhi kebutuhan akan udara bertekanan yang besar. Model ini, dalam kondisi bekas, menawarkan daya 45 kW dan beroperasi pada tekanan maksimum 10 bar, sehingga ideal untuk berbagai lingkungan industri yang membutuhkan pasokan udara bertekanan yang andal. Kompresor yang dilumasi ini dikenal karena ketangguhan dan efisiensinya, yang menjamin umur pakai yang lebih lama dan perawatan minimal. Seri Frecon Plus dari Hertz dirancang untuk mengoptimalkan kinerja energi sekaligus mengurangi biaya operasional. Hal ini tidak hanya membuatnya ekonomis dalam jangka panjang, tetapi juga ramah lingkungan berkat efisiensi energinya. Secara keseluruhan, Hertz Frecon Plus 45 adalah pilihan yang andal bagi mereka yang mencari kompresor bekas yang mampu memberikan daya dan efisiensi yang konsisten. Desainnya yang kokoh dan kemampuannya dalam pengoperasian menjadikannya aset berharga bagi setiap instalasi industri yang membutuhkan solusi udara bertekanan yang andal. Iiedpfxezlxq Ao Aa Dsd

Kondisi: sangat baik (bekas), Hertz energy-saving boiler 50 kW Iisdpfxeq I Nfhj Aa Dsd

Kondisi: bekas, Tahun pembuatan: 2021, Technical details: Operating pressure: 10 bar Total power requirement: 7.5 kW Volume flow rate: 1.1 m³/min Operating hours: 0 h Motor speed: 3,000 rpm Voltage: 400 V / Hz Rated power: 7.5 kW Approx. machine weight: 438 kg Dimensions (L x W x H): 1.0 x 0.55 x 0.85 m SCREW COMPRESSOR WITH ELECTRIC DRIVE with integrated air receiver - Type: ADST 8; Capacity: 6 liters; Size: Ø 160 x 400 mm with integrated dryer Operation via control panel on the unit Air filter front-mounted Iodpfx Aaju Nz D Uj Deid i.e. *

Kondisi: sangat baik (bekas), Tahun pembuatan: 2020, jam operasional: 6.561 h, laju aliran volumetrik: 5,6 m³/jam, tekanan kerja: 10 batang, tekanan (maks.): 10 batang, HERTZ HSC 37 Screw Compressor Motor 37 kW, Iiedpfx Aajtqn Swe Dsd Output 5.6 m³/min, Pressure 10 BAR. Year of manufacture: 2020 Running hours: 6,561 h The compressor is fully operational, practically as new, showroom condition.

Kondisi: baik (bekas), Permanentmagnetmotor, motor permanen magnet, elektromotor, n-Mot, Perm Magnet Motors, servomotor -Daya: 10 kW -Putaran maksimum: 6000 rpm -Poros: Ø 42 mm -Tingkat perlindungan: IP 23 -Jumlah: 1x motor tersedia Iedpfx Aaodpkzte Djid -Dimensi: 880/380/H320 mm -Berat: 136 kg

Kondisi: baik (bekas), Tahun pembuatan: 1997, Fungsionalitas: berfungsi sepenuhnya, Untuk membuat focaccia, roti kecil, baguette, dan dasar kue. Sabuk atas dan bawah baru, pisau diasah ulang oleh perusahaan Krumbein. Lebar sabuk 40 cm. Panjang mesin 80 cm. Tinggi pemotongan minimum 5-7 milimeter. Kecepatan dapat diatur. Hanya bisa diambil sendiri. Iiodjzcf A Ijpfx Aa Ded

Kondisi: bekas, Tahun pembuatan: 2004, nomor mesin/kendaraan: P 04-09-002, neu U05 10 001, Automatic Spray Machine Venjakob HGS-K All images are sample images only. - Manufacturer: Venjakob - Year of manufacture: 2004 - Working width: 800 mm (expandable to 1000 mm) - Current condition: not refurbished - Offer price refers to refurbished condition - Operator side: right - Dual-drive system for gun carriage - Dry extraction: 4,000 m³/h - Extraction port diameter: 400 mm - Conveyor belt transport system - Feed speed continuously adjustable from 3 to 8 m/min - With paint recovery system - Gun control: LS 1 - Installed paint circuits: 1 pc - Airless spray system: 4 units Krautzberger KAA 1300 - Number of paint pumps: 1 pc - Pump manufacturer: Wagner 35-70 - Suitable for solvent-based paints - Suitable for water-based paints - Total connected load: 7 kW, current consumption: 17 A, fuse protection: 35 A - Location: in stock Iiodszf N Raopfx Aa Ded - Voltage fluctuation tolerance max. +/- 5% _____ Optionally, we can also provide you with a quote for the assembly and commissioning of the system, as well as training for your staff. On request, we also offer regular maintenance and servicing of the machine. For further information, please contact us!

Kondisi: bekas, Tahun pembuatan: 1997, nomor mesin/kendaraan: HGS-Single A 97 03 005 Pos.6, Description for the diagram: 1 – Infeed table with cleaning unit (air blower), equipped with a crosswise brush that removes residual dust from components. 2 – Roller-type lacquer applicator No. 1 3 – Roller-type lacquer applicator No. 2 4,5 – UV lamp with conveyor – 1 lamp positioned above for curing from the top. 6 – Quick Wood System RO1400 brushing machine Iiedpfx Asy Sn Sroa Dod 7 – Venjakob spray booth – equipped with 8 spray guns. 8,9,10,11,12 – Drying tunnel with mechanical top air supply via nozzles, allows control of temperature and airflow in 3 separate zones. 13,14 – UV lamp with conveyor – 2 lamps positioned at an angle to the workpiece, curing the edges as well. 15 – Four-shaft brushing machine, with independent adjustment of height and speed for each shaft. 16 – Intermediate sanding outfeed table 17 – Cleaning unit (air blower) for removal of fine dust from the surface 18 – Venjakob spray booth – features a single circuit, but can be switched to a second circuit by changing the entire spray gun rack (a spare rack is available) and switching the pump (two pumps supplied in the set). 19 – Roller conveyor, component positioning by photocells for loading into the dryer 20 – 14-shelf drying chamber 22 – Outfeed table with two selectable speeds depending on the unloading rate of the paint line.

Kondisi: baik (bekas), Tahun pembuatan: 2000, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 3.000 mm, jarak lintasan sumbu Y: 2.700 mm, jarak gerak sumbu Z: 916 mm, Mesin frais portal bekas, model HG3000T, robot frais 6 sumbu untuk pemrosesan komponen kayu, plastik, dan serat kaca dilengkapi dengan dua meja yang dapat dipindahkan, masing-masing berukuran 1000 x 1800 mm Jarak pergerakan: X = 3000 / Y = 2700 / Z = 916 mm Ukuran kubus dalam mode tandem sekitar 2400 x 1000 x 600 mm Ukuran kubus dalam mode sinkron sekitar 2400 x 2100 x 600 mm Tahun pembuatan: 2000 / Mulai digunakan pada tahun 2001 Detail lebih lanjut, lihat gambar! Mesin berfungsi dengan baik dan masih digunakan setiap hari; inspeksi dapat dilakukan saat mesin beroperasi. Penjualan dilakukan karena pembelian mesin yang lebih besar. Iijdpfx Aezh Uzpja Ded Pembongkaran, pemuatan, dan transportasi akan diatur oleh pembeli (Lokasi: D-88319 Aitrach, berat total sekitar 5,5 ton) Penjualan dilakukan sebagai mesin bekas tanpa jaminan atau garansi apa pun kepada pelaku bisnis (B2B). Anda akan menerima faktur resmi dengan pajak pertambahan nilai yang tertera.

Tahun pembuatan: 1998, Kondisi: siap digunakan (bekas), Tersedia sistem pengecatan semprot permukaan otomatis Venjakob. Bahan semprot: pernis berbasis air, lebar kerja: 1300 mm, tinggi maksimum benda kerja: 70 mm, rentang tinggi kerja: 880 mm-920 mm, dimensi minimum benda kerja X/Y: 100 mm/200 mm, dimensi maksimum benda kerja X/Y: 1200 mm/3000 mm, tekanan maksimal bahan semprot: 200 bar, kecepatan kerja: 3 m/menit. Inspeksi di lokasi dapat dilakukan. Iijdpfxjzh Ng Ho Aa Dod

Kondisi: bekas, Tahun pembuatan: 2008, Sheet width: 3100 mm Sheet thickness: 6 mm Back gauge: 1000 mm Cutting angle: 1.2° Hold-downs: 14 pcs Strokes: 18 strokes/min Oil capacity: 150 l Total power requirement: 11 kW Space requirement approx. 3900 x 1900 x 1600 mm Weight: 5500 kg Equipment: Iisdpfxovuz Tps Aa Dsd - Hydraulic swing-beam shear - ELGO control unit - Electric back gauge 1000 mm - Manual blade gap adjustment - Cutting length limitation - Ball rollers on the table - 2x front support arms - 1x front side stop with scale - Front finger guard, folding - Rear safety device (protective grid + light barrier) - Foot switch - Operating instructions

Tahun pembuatan: 2022, Kondisi: baru, Bearing diameter 120 mm Motor: synchronous motor Nominal speed: 3000 rpm Iiodpfeua Itujx Aa Dsd Maximum speed: 4000 rpm Torque: 76.4 Nm Current: 38 A Unused grinding spindle for Höfler Rapid 1250

Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, berat kosong: 115 kg, tegangan masuk: 230 V, masa garansi: 24 bulan, suhu: 95 °C, 1.030-510.0 Iiedpexykwwofx Aa Djd

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2004, Gunting Plat Hidrolik Merk: ERMAKSAN Tipe: HGS 3100x6 Tahun: 2004 Data Teknis Merek: ERMAKSAN Tipe: HGS 3100x6 Tahun Pembuatan: 2004 Lebar Plat: 3100 mm Ketebalan Plat: 6 mm Sudut Pemotongan: 1,2° Jumlah Langkah per Menit: 18 Jumlah Penahan: 15 Daya Motor: 11 kW Sistem Stopper Belakang: 1000 mm Dimensi Mesin: P 3,8 x L 2,2 (ditambah lengan penyangga) x T 1,6 m Berat Mesin: 5,5 t Perlengkapan • Stop sudut • Lengan penyangga • Stopper belakang kontrol CNC 1000 mm dengan kontrol ELGO Iodpfxsxrtxuj Aa Dsid • Penyesuaian celah pemotongan otomatis • Penahan angkat pneumatik • Pembatas panjang potong • Pelindung jari lipat • Tirai cahaya pelindung area belakang Semua data tanpa jaminan. Demo mesin dalam kondisi terhubung listrik tersedia setiap saat di showroom kami.

Kondisi: baru, Sheet width: 3,100 mm Sheet thickness: 6.0 mm Sheet thickness (stainless steel): 4.0 mm Frame width: 3,100 mm Hold-downs: 14 units Oil capacity: 150 l Stroke rate: 18 strokes/min Cutting angle: 1.2° Control: CYBELEC CybTouch Total power requirement: 11.0 kW Weight: 6,300 kg Dimensions (L x W x H): 4,000 x 2,100 x 1,640 mm The manufacturer ERMAK offers you a robust and durable machine for cost-effective sheet metal processing with its HGS hydraulic swing beam shear series. This compact all-rounder helps you increase your productivity. The HGS hydraulic swing beam shear supports you in precise, fast, and cost-efficient cutting operations in your daily workflow. Hydraulic hold-downs for securing the sheet and the support table with integrated ball transfers ensure ergonomic and efficient cutting for your operator. The CNC control enables the use of various sheet types saved in the material library. After selecting the maximum thickness, the optimal blade gap is automatically set by the CNC control via electro-hydraulic adjustment, but can also be set manually. The position and retraction function of the motorized back gauge can be easily set via the touchscreen. The control system also offers memory for cutting programs with cutting sequences. ----- Robust electro-hydraulic CNC swing beam shear * Including CYBELEC CNC Touch Screen control * Including CNC electro-hydraulic blade gap adjustment Iiedjxaa D Hspfx Aa Dod ----- Equipment: - CNC electro-hydraulic swing beam shear - Including CYBELEC CNC touch screen controller, model "CybTouch 8" - Selected CNC control functions: * Back gauge preselection – X axis * Blade gap adjustment * Piece counter * Cutting length limitation * Material preselection, including sheet thickness * Cutting line illumination (cutting to scribe line) and many more - Motorized back gauge, travel range = 5.0 – 1,000 mm (X axis) * On ball screw spindles * Automatically swing-up at maximum travel range for longer cuts * Including selectable retraction function ("swing-away function") * Positioning accuracy: 0.1 mm * Travel speed: 80 mm/sec - 1x side gauge with T-slot and mm scale - 2x front support arms with T-slot and mm scale - Ball transfers on the front support table - Flip-up finger guard with safety switch * Finger guard with viewing windows for scribe cutting - Cutting line lighting with shadow projection - BOSCH/HOERBIGER hydraulic system - SIEMENS electrical system - Light curtain behind the machine (safety device) - Mobile foot switch - CE marking/Declaration of Conformity - Operation manual + wiring diagram + hydraulic circuit diagram Including special equipment: - Pneumatic sheet support device for thin sheet cutting

Kondisi: baru, en-ERMAK_HGS_hydraulic_swing_beam_shear_listing Iiedpjxabzgjfx Aa Ded

Kondisi: baru, Sheet width: 2,100 mm Sheet thickness: 6.0 mm (ST 42) Sheet thickness (stainless steel): 4.0 mm (VA) Cutting angle: 1.2° Stroke rate: 28 strokes/min Oil capacity: 150 l Hold-downs: 11 units Control: CYBELEC CybTouch Motor power: 11.0 kW Backgauge – adjustable: 1,000 mm Table height: 800 mm Weight: 4,500 kg Dimensions (L x W x H): 3,010 x 2,100 x 1,640 mm Manufacturer ERMAK offers you a robust and durable machine for economic sheet metal processing with the hydraulic swing beam shear, model series HGS. This compact all-round machine allows you to increase your productivity. The hydraulic swing beam shear, model HGS, enables precise, fast, and cost-effective cutting in your daily workflow. The use of hydraulic hold-downs to secure the sheet and the support table with integrated ball rollers ensures ergonomic and efficient cutting for your operator. The CNC control allows selection of various sheet types already stored in the material library. After selecting the maximum thickness, the optimal cutting gap is automatically set by the CNC control via electro-hydraulics, but can be adjusted manually if required. The position and retract function of the motorized backgauge can easily be set via touchscreen. In addition, the control provides memory for cutting programs with cutting sequences. ----- Robust electro-hydraulic CNC swing beam shear * including CYBELEC CNC touch screen * including CNC electro-hydraulic cutting gap adjustment ----- Equipment: - CNC electro-hydraulic swing beam shear - including CYBELEC CNC touch screen controller, model "CybTouch 8" - some functions of the CNC control: * Backgauge presetting – X axis * Cutting gap adjustment * Piece counter * Cutting length limitation * Material presetting, including sheet thickness * Cutting line illumination (cutting to scribe line), and more - Motorized backgauge, travel path = 5.0 – 1,000 mm (X axis) * with ball screw spindles * automatic swing-up at maximum travel for longer cuts * selectable retract function ("swing-away function") * positioning accuracy 0.1 mm * travel speed 80 mm/sec - 1x side gauge, with T-slot and mm scale - 2x front support arms, with T-slot and mm scale - Ball rollers in front support table - Folding finger guard with safety switch * finger guard with viewing windows for cutting to scribe Iijdoxaa Acjpfx Aa Dod - Cutting line illumination with shadow outline - BOSCH/HOERBIGER hydraulic unit - SIEMENS electrical system - Light curtain behind the machine (safety device) - Free-moving foot switch - CE mark / Declaration of conformity - Operating manual + electrical diagram + hydraulic diagram

Kondisi: baru, Sheet width 4100 mm Sheet thickness 6.0 mm Sheet thickness (stainless steel) 4.0 mm Hold-downs 18 pcs Strokes 15 strokes/min Oil capacity 150 ltr. Cut angle 1.2° Control CYBELEC Cybtouch Backgauge – adjustable 1000 mm Working height 800 mm Motor power 11.0 kW Weight 8,100 kg Dimensions L-W-H 5000 x 2410 x 1650 mm The manufacturer ERMAK offers you, with its HGS hydraulic swing beam shear series, a robust and durable machine for the economical processing of sheet metal. This compact all-round machine allows you to increase your productivity. The HGS hydraulic swing beam shear supports you with precise, fast, and cost-efficient cutting in your daily operations. Thanks to hydraulic hold-downs for securing the sheet and a support table with integrated ball rollers, ergonomic and efficient cutting for your operator is ensured. The CNC control allows the use of different sheet types that are already stored in the material library. After selecting the maximum thickness, the optimal cutting gap is automatically set by the CNC control via electro-hydraulic adjustment, but can also be adjusted manually. The position and retract function of the motorized backgauge can be easily set via touchscreen. Additionally, the control system features a memory for cutting programs with cut sequences. ----- Robust electro-hydraulic CNC swing beam shear * Includes CYBELEC CNC touch screen control * Includes CNC electro-hydraulic cutting gap adjustment ----- Equipment: - CNC electro-hydraulic swing beam shear Ijdpfx Asxaa R Tja Deid - Incl. CYBELEC CNC Touch Screen Controller, Model "CybTouch 8" - Some CNC control functions: * Backgauge preset – X axis * Cutting gap adjustment * Piece counter * Cutting length limitation * Material selection, including sheet thickness * Cut line illumination (cutting to scribe line) … and many more - Motorized backgauge, travel = 5.0 – 1,000 mm (X axis) * On ball screw spindles * Automatically swing-up at max. travel for longer cuts * Includes selectable retract function ("Swing-Away Function") * Positioning accuracy 0.1 mm * Travel speed 80 mm/sec - 1x side gauge, with T-slot and mm scale - 2x front support arms, with T-slot and mm scale - Ball rollers in front support table - Foldable finger guard with safety switch * Finger guard with viewing windows for cutting to scribe line - Cut line illumination with shadow outline - BOSCH/HOERBIGER hydraulic system - SIEMENS electrical system - Light curtain behind the machine (safety device) - Free-moving foot switch - CE mark/Declaration of Conformity - Operating manual + circuit diagram + hydraulic diagram

Kondisi: baru, Sheet width: 2600 mm Sheet thickness: 8.0 mm Sheet thickness (stainless steel): 5.0 mm Hold-downs: 12 units Strokes per minute: 18 Oil capacity: 200 ltr. Cutting angle: 1.5° Motor power: 15.0 kW Machine weight approx.: 6,300 kg Dimensions (L x W x H): 3525 x 2350 x 1700 mm The manufacturer ERMAK offers you, with the hydraulic swing beam shear of the HGS model series, a robust and durable machine for the efficient processing of sheet metal. This compact all-round machine helps you increase your productivity. The hydraulic swing beam shear, model HGS, supports you in achieving precise, fast, and cost-efficient cuts in your daily workflow. The use of hydraulic hold-downs to clamp the sheet and the support table equipped with built-in ball rollers ensure ergonomic and efficient cutting for your operator. The CNC control enables the use of various types of sheets already stored in the material library. Upon selection of the maximum thickness, the optimal cutting gap is automatically set electro-hydraulically via the CNC control, but can also be adjusted manually. The position and retraction function of the motorized backgauge can be easily set via the touchscreen. Moreover, the control offers memory for cutting programs with cut sequences. ----- Robust electro-hydraulic CNC swing beam shear * including CYBELEC CNC touchscreen control * including CNC electro-hydraulic cutting gap adjustment ----- Equipment: - CNC electro-hydraulic swing beam shear - including CYBELEC CNC touchscreen controller, model "CybTouch 8" - Selected functions of the CNC control: * Backgauge preselection - X axis * Cutting gap adjustment * Piece counter * Cutting length limitation * Material preselection, including sheet thickness * Cut line illumination (cutting along scribe lines) .. and much more - Motorized backgauge, travel range = 5.0 - 1,000 mm (X axis) * on recirculating ball screws * automatic swing-up at maximum travel for longer cuts * including selectable retraction function ("Swing-Away Function") * positioning accuracy 0.1 mm * travel speed 80 mm/sec - 1x side gauge with T-slot and mm scale Ijdpfsxab D Iox Aa Deid - 2x front support arms with T-slot and mm scale - Ball rollers in the front support table - Hinged finger guard with safety switch * finger guard with viewing windows for scribe line cutting - Cut line illumination with shadow line - BOSCH/HOERBIGER hydraulic system - SIEMENS electrical system - Safety light curtain behind the machine - Freely positionable foot switch - CE mark/declaration of conformity - Operating manual + circuit diagram + hydraulic diagram

Kondisi: baru, Sheet width: 3100 mm Sheet thickness: 6.0 mm Sheet thickness (stainless steel): 4.0 mm Hold-down devices: 14 units Strokes per minute: 20 spm Cutting angle: 1.2° Control: CYBELEC CybTouch Working height: 800 mm Oil capacity: 150 l Total power requirement: 11.0 kW Weight: 5500 kg Dimensions (L x W x H): 4,000 x 2,410 x 1,640 mm The manufacturer ERMAK offers you, with the HGS hydraulic swing beam shear series, a robust and durable machine for economical sheet metal processing. This compact all-rounder enables you to increase your productivity. The HGS hydraulic swing beam shear supports you with precise, fast, and cost-effective cutting in your daily operations. Thanks to hydraulic hold-down devices for securing the sheet and the support table with integrated ball rollers, ergonomic and efficient cutting is ensured for your operator. The CNC control allows for easy selection of various sheet types, which are already stored in the material library. After selecting the maximum thickness, the optimal cutting gap is automatically adjusted electro-hydraulically via the CNC controller, but can also be set manually. The position and retract function of the motorized backgauge can be easily set via the touchscreen. In addition, the controller features program memory for cutting sequences. ----- Robust electro-hydraulic CNC swing beam shear * Includes CYBELEC CNC touch screen control * Includes CNC electro-hydraulic cutting gap adjustment ----- Equipment: - CNC electro-hydraulic swing beam shear - Includes CYBELEC CNC touch screen controller, model "CybTouch 8" - Selected functions of the CNC control system: * Backgauge pre-selection (X-axis) * Cutting gap adjustment Iodoxaa Rgspfx Aa Doid * Piece count * Cutting length limitation * Material pre-selection, including sheet thickness * Cutting line illumination (cutting to scribed line), and many more - Motorized backgauge, travel range = 5.0 - 1,000 mm (X-axis) * With precision ball screws * Automatically retractable at maximum travel for longer cuts * Includes selectable retract function ('Swing-Away Function') * Positioning accuracy: 0.1 mm * Traversing speed: 80 mm/sec - 1x side gauge with T-slot and mm scale - 2x front support arms with T-slot and mm scale - Ball rollers in the front support table - Hinged finger guard with safety switch * Finger guard with inspection windows for cutting to scribe - Cutting line illumination with shadow effect - BOSCH/HOERBIGER hydraulic system - SIEMENS electrical system - Light curtain behind the machine (safety device) - Freely movable foot switch - CE mark / Declaration of Conformity - Operating manual + wiring diagram + hydraulic diagram

Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, berat kosong: 105 kg, tegangan masuk: 230 V, masa garansi: 24 bulan, suhu: 95 °C, ts-1 Iiedpfoxtc Rcjx Aa Ded

Tahun pembuatan: 2005, Kondisi: siap digunakan (bekas), de_DE-001 Isdpfsxa Ekfex Aa Doid

Tahun pembuatan: 2001, Kondisi: baik (bekas), Seith 1042.80.15, Year 2001 Forklift Attachment: Push Device / Telescopic Forks / Push-off Device Iiedpfxsfgvv To Aa Djd Mounting: FEM2B, approx. 41 cm, suitable for forklifts up to 2.5 t Please refer to the nameplate for further details. Used condition, low usage.