Beli Holz-Her 1411-3 bekas (67.760)

Kondisi: siap digunakan (bekas), Very good condition. Gjdpfx Aevunm Aom Sobn

Kondisi: baik (bekas), Tahun pembuatan: 1999, ts01 Gsdpfxezafppj Am Ssbn

Kondisi: bekas, Tahun pembuatan: 1999, Holz-Her SPRINT 1411 Kantenanleimmaschine Beschreibung Werkstückdicke min./max.: 6/45 mm Gedsw Ebrxspfx Am Sobn Automatischer Kantenmagazin (Kantenband bis 5 mm) Werkstückbreite min.: 60 mm Werkstücklänge min.: 180 mm Patronenleimsystem (kurze Aufheizzeit 2-3 min) Kappaggregat Bündigfräsaggregat Ziehklingenaggregat (flach) Poliereinheit (Bürsteinheit) CE (Trotz größter Sorgfalt sind alle Änderungen und Irrtümer in den technischen Daten, Preisen und Angaben vorbehalten! Keine Gewährleistung auf gedruckte Daten. Verfügbarkeit vorbehaltlich Zwischenverkauf.)

Kondisi: bekas, Tahun pembuatan: 2013, Used machine Year of manufacture: 2013 Features and technical specifications: - Machine completely overhauled: - New Glue Jet 301 gluing system (top part 1 mm) - All units checked - All cutters resharpened - All blades replaced - Feed speed: 10 - 18 m/min - Workpiece length: min. 160 mm - Workpiece width: min. 60 mm - Workpiece thickness: 8 - 60 mm - Edge thickness: 0.4 - 8 mm - Electrical equipment for stepless feed: 400 V / 50 Hz, 2.2 kW - Motorized pressure bridge adjustment - Automatic chain lubrication - PPC 315 control unit with 15" touchscreen Gsdpfx Amewka Iis Sobn - ECO MODE energy-saving mode - Infeed fence 1350 mm, motorized adjustment - Jointing/milling unit 1802: - 2 x 2.0 kW, 200 Hz, 12000 rpm with 2 milling units for jointing the panel edge - Cutter, diamond Ø 70 x 64 x 30 mm, Z2, left rotation for jointing unit - Cutter, diamond Ø 70 x 64 x 30 mm, Z2, right rotation for jointing unit - Fully automatic edge feed 1901 - Automatic glue application station Glu Jet GJ301: - 2.3 kW; 50 Hz - Granulate reservoir - Pressure section 1913 MOT - Pneumatic end trimming unit 1918 (60 mm) - Multifunction milling unit 1826 MOT4 (2 x 0.65 kW): - Air Stream System cutter, diamond Ø 58 mm x 24 mm, Ø 20 mm Z = 2 R = 2.5 mm left rotation - Air Stream System cutter, diamond Ø 58 mm x 24 mm, Ø 20 mm Z = 2 R = 2.5 mm right rotation - Contour milling unit 1833 MOT4: - Cutter, diamond Ø 72.5 mm x 19 mm, Ø 20 mm Z = 4 radius R = 2.5 mm, left rotation with CM technology - Cutter, diamond Ø 72.5 mm x 19 mm, Ø 20 mm Z = 4 radius R = 2.5 mm, right rotation with CM technology - Scraper unit 1929 MOT2: - HW reversible knives for scraper holder R = 2.5 mm (2 pcs. required) - Flat scraper 1964 - Polishing unit 1940 (2 x 0.12 kW, 50 Hz, 1400 rpm) Availability: short-term Location: 63934 Röllbach

Kondisi: bekas, Tahun pembuatan: 2003, Used machine Year of manufacture: 2003 Equipment and technical data: - Control system with LCD display - Swiveling operator panel - Program memory - Manual pressure beam adjustment - Feed via transport chain - Extendable workpiece support Jointing unit 1961: - 2 x 2.0 kW - Diamond jointing cutters, both conventional and climb milling Edge magazine 1903: - Support plate 820 mm, max. loading capacity 40 mm - Automatic feed for rolls and strip material Glue application system 1906: - Cartridge system with sensing nozzle - With automatic reloading - Suitable for PUR adhesives Pressure station 1816: - Driven roller - Pneumatic control of pressure station End trimming unit 1918: - 2 x 0.22 kW - Swivels from 0° to 10°, pneumatically adjustable Milling unit 1942 MOT 2: - For flush, radius, and chamfer milling - Motorized adjustment - Air nozzle at the milling unit Corner copy unit 1832: - Corner copying up to r = 3 mm, postforming up to r = 6 mm Radius scraper unit 1929 MOT 2: - Plastic edges up to 3 mm - Chip collection box for radius scraper Flat scraper 1964: - Operation-controlled flat scraper - Air nozzle at the flat scraper Buffing unit 1940 Edge thickness for roll material: 3 mm Edge thickness for strip material: 5 mm Max. edge thickness for corner copying: 3 mm Workpiece thickness: 6–45 mm Workpiece thickness for corner copying: 45 mm Minimum workpiece length: 180 mm Feed speed: 8 m/min Workpiece support distance: 470 mm Support plate Ø for edge material: 800 mm Godpfx Aewka Nyjm Sebn End trimming knife for roll material up to: 3 mm Heat-up time: 3.5 min Jointing cutter power: 2 x 2 kW End trimming saw power: 2 x 0.22 kW Milling station power: 2 x 0.6 kW Corner copying power: 0.22 kW Suction connection jointing unit: 120 mm Suction connection milling unit: 70 mm Suction connection scraper unit: 70 mm Dimensions: 5,350 x 1,669 x 1,940 mm Weight: 1,200 kg Location: Röllbach Availability: short-term

Kondisi: bekas, Tahun pembuatan: 2011, Mesin bekas Tahun pembuatan: 2011 Kondisi: Mesin telah direkondisi dan dirawat sepenuhnya Perlengkapan dan data teknis: Kecepatan umpan stepless 10-18 m/menit Kontrol Edge Control 19 dengan layar sentuh warna 18,5" Unit penghalusan pinggiran Sistem pemberian tepi otomatis Stasiun aplikasi lem dengan patron, nosel sensor penyesuaian tinggi lem otomatis Gbjdpfxjwka N Ts Am Sjn Unit penekan Unit pemotong Unit milling multifungsi Unit copy milling Unit scraper radius Unit scraper permukaan Unit pemoles Tebal benda kerja: 6 - 60 mm Tebal pinggiran: 0,4 - 8 mm Lebar benda kerja minimum: 60 mm Panjang benda kerja minimum: 180 mm Dimensi: 5300x1500x1600 mm Berat: 2200 kg Lokasi: 65439 Flörsheim Ketersediaan: segera

Kondisi: bekas, Tahun pembuatan: 2023, Used machine Year of manufacture: 2023 177 operating hours Equipment and technical specifications: - Edge Control PPC 322 W control system with 21.5'' 16:9 color touchscreen - ECO MODE energy-saving mode - Motorized pressure bridge adjustment - Extendable workpiece support, 600 mm - Extension for extendable workpiece support - 3-color LED entry light - Motorized adjustment of infeed fence - Long infeed fence - Air cushion table BS 301 - iTronic package - Jointing unit FG201 with 2 milling heads, 64 mm height - Edge feed 1903 - GluJet GJ 301 adhesive application system - Automatic glue height adjustment (sensor nozzle) - Magazine for 4 glue cartridges - GluJet collection container - Pressure unit DW 301 with motorized NC axis - Spray unit GM301 after pressure unit with lubricant for high-gloss edges - Pneumatic trimming unit 1918 (60 mm) - Extraction hoods for trimming unit - Milling unit FR301 MOT6 - Corner copying unit FF 301 MOT 1, including motorized horizontal axis adjustment - Shelf program - Scraper unit ZK301 MOT4 with high-gloss package - Surface scraper FK701 - Complete spray unit for separating and cleaning agents - Polishing unit Availability: short notice Location: Flörsheim Gbsdpfxoy Rgwqs Am Ssn

Kondisi: bekas, Tahun pembuatan: 2001, Used machine Gbjdpfx Aew Nac Aem Ssn Year of manufacture: 2001 Features and technical data: The machine will be completely workshop overhauled! Automatic horizontal and vertical positioning for absolute and chain dimensions Digital display for horizontal cuts PLC control with 2-line display and plain text messages for operation mode and error diagnostics infinitely variable feed speed up to 24 m/min automatic workpiece end detection calculator function in the control panel (for calculating workpiece dimensions) Cutting length: 4300 mm Cutting height: 2200 mm max. trimming height: 2100 mm max. scoring height, vertical: 2100 mm max. cutting depth: 80 mm Motor: 5.5 kW Saw blade speed: 4500 rpm Saw blade diameter: 300 mm Air requirement: 1200 m³/h Air velocity: 20 m/s Static negative pressure: 1200 Pa Extraction connection: 2 x 120 mm Dimensions (L x W x H): 5620 mm (plus extraction connectors) x 1480 mm x 2948 mm Room height: 2990 mm Compressed air connection: 6 bar Air consumption: 50 NL/min Electrical connected load: 5.7 kW with Supercut pre-scoring unit with pneumatically swiveling saw unit with longitudinal fence for lower workpiece support with short, complete folding rail Availability: by arrangement Location: Flörsheim

Kondisi: bekas, Tahun pembuatan: 2002, panjang total: 5.050 mm, lebar total: 2.420 mm, tinggi total: 800 mm, 01 Gbsdszcng Nspfx Am Ssn

Kondisi: bekas, Tahun pembuatan: 2019, Used machine Year of manufacture: 2019 Condition: Good (The machine has undergone extensive annual maintenance. Last serviced in March 2026!) Equipment: - iTronic – Adaptive pressure and glue quantity control with automatic, program-dependent fine adjustment - SPS-controlled infeed fence adjustment - Automatic chain lubrication – Intelligent automatic transport chain lubrication - Edge Control 19 control system Gbodpfx Aoy Hyl Tem Ssn - EL GRM GRADUAL. 400V50HZ 2.2KW V2 SPRINT 1329 PERFORMANCE 400V50HZ Edge Control 19 control system with 18.5" touchscreen color display, 16:9 format ECO MODE energy-saving mode (automatic standby mode) Planing unit 1802 (2 x 2.0 kW, 200 Hz, 12,000 rpm) with 2 planing units for trimming the panel edge Milling cutter, diamond Ø 70 x 64 x 30 mm, Z2+2, left-hand rotation. Air Stream System (HOLZ-HER / LEUCO patent) Milling cutter, diamond Ø 70 x 64 x 30 mm, Z2+2, right-hand rotation. Air Stream System (HOLZ-HER / LEUCO patent) Edge feed 1901 SYNCHRO – Automatic transport for roll and strip material Glue application station Glu Jet GJ301 automatic (2.3 kW, 50 Hz) DW501 SPS MOT. SPRINT MOTORIZED Spray unit GM501 after the printing unit with lubricant. Recommended for high-gloss edges End trimming unit 1918 (60 mm) pneumatic (2 x 0.45 kW, 12,000 rpm), pneumatically tiltable 0/10° Milling unit FR701 100% repeat accuracy at the push of a button thanks to backlash-free mechanics Air Stream System Multi-cutter, diamond Ø 70.9 x 16 mm, Z = 2+2 Air Stream System Multi-cutter, diamond Ø 70.9 x 16 mm, Z = 2+2 Contour milling unit FF701 100% repeat accuracy at the push of a button thanks to backlash-free mechanics Milling cutter, diamond Ø 72.5 mm x 19 mm, Ø 20 mm Z = 4, Radius R = 2 mm, left-hand rotation with CM technology Milling cutter, diamond Ø 72.5 mm x 19 mm, Ø 20 mm Z = 4, Radius R = 2 mm, right-hand rotation with CM technology Scraper unit 1929 MOT4 incl. high-gloss package with motorized adjustment of sensing rollers HW reversible inserts for scraper holder, R = 2.0 mm (2 pcs required) Flat scraper FK701 With pre- and post-tracking for removing glue residue Spray unit TR501 for infeed and outfeed (separating + cleaning agents) Incl. nesting shoes bottom with their own spray unit Location: Hesse Availability: Approx. July 2026

Kondisi: bekas, Tahun pembuatan: 2010, tinggi total: 2.580 mm, panjang total: 5.500 mm, lebar total: 1.500 mm, Weight: 1,500 kg Price: On request - Year of manufacture: 2010 - Documentation available: No - CE marking present: Yes - CE certificate available: No - Serial number: 161/1-10 - Number of units: 7 - 1st unit type: Pre-milling unit - Tools included: Yes - 2nd unit type: Gluing unit - 3rd unit type: Pressure rollers - Tools included: Yes - 4th unit type: End trimming unit - Tools included: Yes - 5th unit type: Rough trimming unit - Tools included: Yes - 6th unit type: Corner rounding unit - Tools included: Yes Gbjdpfoyu Tkkox Am Son - 7th unit type: Flat scraping unit - Tools included: Yes - Voltage [V]: 400 - Power consumption [A]: 38.85 - Fuse [A]: 50 - Transport dimensions: 5500 mm x 1500 mm x 2580 mm (L x W x H) - Transport weight [kg]: 1,500 kg - Number of transport packages: 1 Financial information: VAT: The stated price is net plus VAT VAT/differential taxation: VAT deductible for businesses Delivery and trade-in possible at any time for all items in the industrial sector Yorick Diebels

Kondisi: bekas, Tahun pembuatan: 2011, tinggi total: 1.730 mm, panjang total: 6.100 mm, lebar total: 1.440 mm, Color: Grey Weight: 2,500 kg - Year of manufacture: 2011 Godpsyf Dakofx Am Sebn - Documentation available: No - CE marking present: Yes - CE certificate available: No - Serial number: 5/1-107 - Number of units [pcs]: 9 - └ 1st unit type: Pre-milling unit - Tools included: Yes - └ 2nd unit type: Gluing unit - └ 3rd unit type: Pressure rollers - Tools included: Yes - └ 4th unit type: End trimming unit - Tools included: Yes - └ 5th unit type: - Tools included: Yes - └ 6th unit type: Corner rounding unit - Tools included: Yes - └ 7th unit type: Radius scraping unit - Tools included: Yes - └ 8th unit type: - Tools included: Yes - └ 9th unit type: Flat scraping unit - Tools included: Yes - Voltage [V]: 400 - Power consumption [A]: 21.9 - Fuse [A]: 50 - Transport dimensions: 6100mm x 1440mm x 1730mm (L x W x H) - Transport weight [kg]: 2500kg - Number of transport packages: 1 Financial Information VAT: The stated price is plus VAT VAT/margin scheme: VAT deductible for business customers Delivery and trade-in possible at any time for all industrial sector items Yorick Diebels

Kondisi: sangat baik (bekas), Tahun pembuatan: 2005, Brand: HOLZ HER Model: SPRINT 1310 - CE Standard Automatic edge banding machine with cartridge-based glue system for processing wood, PVC, ABS, and veneer edges. Suitable for furniture, panel materials, custom productions, kitchens, bathroom furniture, joineries, and much more – CE-compliant. Technical Data: Min./Max. panel height: 6 – 45 mm Edge thickness: 0.4 – 6 mm Maximum glue height: 51 mm Minimum panel width: 60 mm Minimum panel length: 180 mm Feed speed: 8 m/min Compressed air: 6–7 bar Machine Features: Gsdpfx Amey Emw Ho Sjbn Automatic feed for coil and strip material Cartridge glue system, allows switching between EVA and PUR glue during operation or changing glue color 3 pressure rollers, 1 driven End trimming unit with 2 motors 0.22 kW each Multi-function unit with controlled axis for flush and chamfer milling, 2 motors 0.6 kW each Flat scraper unit Radius scraper unit Buffing unit Acoustic hood Control: Pivoting and swiveling control panel All units can be individually activated Function display with text and graphics Pre-selection display of units Program list with names and numbers, self-diagnosis Approx. machine dimensions: 3900 x 1050 x 1800 mm (H) Weight: 1000 kg INCLUDES OTT Rondomat – Corner Rounding Unit Note on used machines: • Subject to technical changes and prior sale. • Prices stated are ex works – loaded free of charge! • The machine has been cleaned and function-tested. • All machines are sold as-inspected without any warranty or guarantee. Buyers are welcome to inspect the machine at our location. • Special agreements are only valid in written form. (We respond to inquiries only if you provide your address and telephone number!)

Kondisi: bekas, Tahun pembuatan: 2006, Used machine Year of manufacture: 2006 Condition: completely overhauled Features and technical data: - Equipped with a new glue application system - Infeed fence, manually adjustable - Milling unit 1961 - Edge feed unit 1903 - Glue application station 1906 with sensing nozzle - Pressing unit 1816, pneumatic Gbsdpfx Amewka H Ss Sjn - End trimming unit 1822 - Milling unit 1942 M (radius, chamfer, flush trimming) - Complete air nozzle - Scraper station 1929 - Chip collection box - Area scraper 1964 - Extraction hood set - Complete safety covers - Total length: 5,291 mm - Workpiece thickness: min. 6 / max. 50 mm - Edge material thickness depending on configuration: 0.4–5 mm - Edge height max.: 55 mm - Edge strip length: min. 350 mm - Edge overhang/height per side: max. 3 mm - Workpiece width: min. 60 mm - Workpiece length: min. 180 mm - Feed speed: 12.5 m/min - Extraction: - Jointing milling unit: 900 m³/h - Milling unit: 280 m³/h - Scraper station: 280 m³/h - Static negative pressure: - Jointing milling unit: 1,490 Pa - Milling unit: 1,650 Pa - Minimum air velocity: 20 m/sec - Jointing milling unit connection: 70 mm - Scraper connection: 70 mm - Compressed air: 6 bar Availability: short-term Location: Röllbach

Kondisi: bekas, Tahun pembuatan: 2021, Fungsionalitas: berfungsi sepenuhnya, Dijual: Holz-Her 1329 Multi Edgebander Premium + Return-Master 5920 Kami menawarkan mesin edging Holz-Her 1329 Multi kelas atas, lengkap dengan sistem pengembalian Return-Master 5920. Unit ini berusia 4 tahun dan dalam kondisi sangat baik. Harga Baru Asli: €138.000 + PPN Harga Kami: €69.000 + PPN (hemat 50%) Mengapa memilih mesin ini? Gjdpfx Aoygrghsm Ssbn Dapatkan mesin premium bekas ringan dengan harga yang setara mesin subsidi, namun tanpa birokrasi, dokumen, atau kewajiban jangka panjang dari aplikasi hibah. Perawatan: Diservis secara berkala oleh tim teknisi ahli Dimpex. Performa: Versi "Multi" dengan spesifikasi tinggi untuk kebutuhan produksi yang fleksibel. Hanya untuk pembeli serius.

Kondisi: sangat baik (bekas), CATALOG NO. 8010 TECHNICAL DATA Equipment: - Plate - Pre-milling - Tape feeder - 2 glue tanks: for granulate and for cartridges - Currently, the machine is using hot-melt glue (granulate) - Guillotine – preliminary trimming of edge banding - 3 pressure rollers - 2 end-trimming units with saw blades - 2 milling units for edge profiling (radius cutters) - Corner rounding unit - Scraper units – for excess glue removal - Polishing units - Variable feed speed adjustment 8-18 m/min - Workpiece thickness: 6-45 mm - Min. workpiece length: 180 mm - Min. workpiece width: 60 mm - Max. edge banding thickness from roll: 3 mm - Air requirement: 6-8 bar - Extraction nozzle diameter: 7 x 80 mm, 1 x 130 mm - Dimensions (L x W x H): 6650 x 1260 x 1700 mm - Weight: 1850 kg ADVANTAGES – German-made – Spray system – Pre-milling and corner rounding Gedpfjy Uvmvsx Am Sobn – 2 glue tanks – Complete with 4 additional cutters – Unpainted – Original technical documentation (DTR) + CE – Very good condition – Used edge banding machine Net price: 49,900 PLN Net price: 11,880 EUR (based on an exchange rate of 4.20 EUR) (Prices may change with significant currency fluctuations)

Kondisi: bekas, Tahun pembuatan: 2013, Used machine Year of manufacture: 2013 Equipment and technical specifications: - Controller with 15" touch screen - Jointing milling unit with 2 milling heads - Edge feed system - GluJet 301 glue application system: 2.3 kW, automatic glue height adjustment, sensing nozzle - Pressure unit: pneumatic - End trimming unit: pneumatic - Diamond cutters left + right: with CM technology - Corner copying unit with diamond cutters - Surface scraper - Buffing unit - Extendable workpiece support - Motorized pressure bridge adjustment with NC axis via program control - Extraction hoods for end trimming unit - Multifunctional milling unit: MOT 4 - Vertical tracing rollers: pneumatic - Pneumatic tilting device for milling unit MOT 4 - Scraper unit MOT 2 with chip collection box - Spray unit for infeed and outfeed area - Minimum workpiece length: 160 mm - Workpiece thickness: 6-60 mm - Edge thickness: 0.4-6 mm - Feed speed: 10 m/min - Total length: 4930 mm - Weight: 1420 kg Availability: short term Location: 63934 Röllbach Gbjdpfxoy U R Izj Am Sjn

Kondisi: bekas, tinggi total: 1.600 mm, panjang total: 1.500 mm, lebar total: 800 mm, berat keseluruhan: 440 kg, Kein Mindestpreis - garantierter Verkauf zum höchsten Gebot! TECHNISCHE DETAILS Trimming Unit: yes Panel support guides: yes Number of Edge Processing Units: 1 Processing Unit: top and bottom rough trimming Number of finishing motors: 1 MASCHINEN-DETAILS Modell: UF 362 / 2713 Gbsdpey Uwq Aefx Am Son Typ: Manual sanding machine AUSSTATTUNG Trimming Unit Panel support guides

Kondisi: baik (bekas), 0338 Marke: HOLZ HER Modell: SPRINT 1310 – CE-Standard Automatische Kantenanleimmaschine mit kartuschenbasiertem Leimsystem für Holz-, PVC-, ABS- und Furnierkanten, geeignet für Möbel, Platten, maßgefertigte Einrichtungen, Küchen, Badmöbel, Tischlereien und vieles mehr – CE-Standard Ausstattung: Schneller Leimwechsel: Patentiertes Kartuschensystem, das einen schnellen und effizienten Wechsel zwischen EVA- und PUR-Leim während des Betriebs, sowie den Farbwechsel des Leims ermöglicht – Einfacher Kartuschentausch, kein aufwendiges Reinigen des Leimtanks erforderlich – Einsatzbereit in 3,5 Minuten Technische Daten: Min./max. Werkstückhöhe: 6–45 mm Verarbeitbare Kantenstärke: 0,4–6 mm Maximale Anleimhöhe: 51 mm Mindestplattenbreite: 60 mm Mindestplattenlänge: 180 mm Vorschubgeschwindigkeit: 8 m/min Maschinenausstattung: Gbodpfxeyvh Sye Am Ssn Leimaggregat: Automatische Zuführung für Rollen- und Streifenkanten – Patentiertes HOLZ HER Kartuschensystem – Andruckrolleneinheit Schwenkbare Vor- und Nachschnittaggregate – 0,22 kW Motoren Multifunktionsaggregat mit gesteuerter Achse für bündiges Fräsen und Fasen – 2 x 0,6 kW Motoren Ziehklingenaggregat für die Kantenbearbeitung Leimrestabstreifereinheit Bürstenaggregat für perfekte Reinigung HOLZ HER Steuerung: Schwenkbares und neigbares Bedienpanel – Alle Aggregate individuell schaltbar – Aggregatefunktionen mit Text- und grafischer Anzeige – Anzeige für Aggregatvorwahl – Programmliste mit Namen und Nummern – Selbstdiagnose Schallschutzkabine Druckluft 6–7 bar Abmessungen (L x B x H): 4300 x 1200 x 1675 mm Gewicht: 1700 kg

Kondisi: bekas, Tahun pembuatan: 2009, HOLZ-HER edge banding machine CONTRIGA 1366 Edge thickness: 0.4–30 mm (depending on configuration) Edge height: 51/66 mm (depending on configuration) Panel thickness: 6–45/60 mm (depending on configuration) Edge types: roll and strip material Feed speeds: infinitely variable feed from 12–30 m/min (depending on configuration) with adjustable infeed level in the magazine area (max. adjustment range 30 mm) with height-adjustable magazine plate for varying the lower edge overhang with large magazine plate Ø 820 mm for edge rolls up to Ø 800 mm with transport chain including automatic central lubrication with motorized, position-controlled bridge height adjustment with pneumatic locking roller for minimal workpiece spacing with extendable workpiece support (extension 1600 mm) with space-saving, pneumatically controlled sliding covers along the entire machine (variations possible for individual units) with motorized infeed fence with spray oilers for lubrication of all joints and bolts (incl. operating hours counter) with central extraction connection (2x Ø 200 mm) with integrated chip collection box at the end of the machine (with radius scraper unit installed) Controller PPC 231 - Power PC for efficient setup and changeover - 15" SVGA display with touchscreen - CF memory card 128 MB - USB port on board - Ethernet network connection - Keyboard port on board - Windows-like user interface - all information in plain text and/or graphics - swivel and pivoting control panel at eye level - dustproof membrane keyboard with softkeys (pushbuttons) - LED indicator for unit preselection - program list with program names and numbers - extensive program storage - individual selection of units with functions for basic settings of setpoint values, reference points, and tool corrections as well as fixed reference points - setup operations for units and their axis settings centrally and clearly organized via fine adjustment (depending on configuration) - interval display for minimum workpiece distance Gbjdpfx Amovvkfds Sen - integrated reference control - reference points are controlled in general or program-specific mode - clear and comprehensive acquisition of all operating data - service messages in plain text - diagnostics system - includes integrated synchronous bus system for high accuracy in unit control - individual management for up to ten users, including password protection - online maintenance (optional), data exchange with HOLZ-HER Service - barcode interface (optional) BASE MACHINE CONTRIGA 1366 - Belt bridge Options and accessories for the base machine Spray unit 1856 for infeed and outfeed area For the infeed area: Electronically controlled release agent spray unit with release agent Riepe-LPZ/II For the outfeed area: Electronically controlled cleaning agent spray unit with cleaning agent Riepe-LP163/93 (only in combination with jointing cutter unit 1961 and surface scraper 1964) Jointing cutter unit Jointing station 1803 (2x 2.6 kW, 200 Hz, 12,000 rpm) With two plunge-controlled milling units • 1 unit in counter-rotation • 1 unit in co-rotation Plunge depth 5 mm with static frequency converter 200 Hz, without milling tool with ProLock quick-release tool holder for rapid tool change Tool for 1803 (workpiece height up to 60 mm) Diamond cutter PRO UT 2 pcs (front and rear) incl. safety hoods Ø 100-63 – Ø 30 mm, Z = 3 + 3 + 3, 1x left rotation, 1x right rotation Low-noise cutter with integrated chip guidance DFC technology (Leitz system) Chip removal max.

Kondisi: bekas, Tahun pembuatan: 2009, automatic central lubrication Milling unit 7833, two-stage, 11 kW Speed range: 1000 - 24000 rpm 1 double drilling spindle in X-direction 1 integrated saw unit for sawing/grooving in X-direction, traversing with the workpiece Tool changer 7892: 16-fold linear pick-up changer, fixed installation on the right side of the machine Laser pointer, consisting of 2 pointers for positioning the vacuum cups and for tracing the workpiece contour Automatic console and cup positioning system: 6 consoles, each with 3 vacuum cup mounts, including 1 vacuum cup 80x80 mm per mount, and 4 loading aids Additional machining fields at the front for 6 consoles Base unit pneumatics for frame clamping system 7974 (6 consoles) 2D barcode scanner Video camera on machining head Vacuum pump: 140 m³/h Vario Tool Change aggregate package, comprising: Gbodpovvi Spefx Am Sen - Vector axis 7899 (C-axis), fully interpolating, 0-360° continuous rotation - Pneumatic tool changer 7890, 1-position pick-up system, fix-mounted to the left of the machine frame - Tool changer 7894, 6-position pick-up magazine, specifically for Vario Tool Change tool holders, fixed installation within the left machine frame, loadable with Vario Grip KSJ F 40 collet holders - 3 pieces Vario Grip KSJ F 40 tool holders (for 2-20 mm ER32 collets) - 1 piece saw blade holder - 3 collets as selected by the customer - 1 HW circular saw blade, max. diameter 220 mm Location: Nattheim

Kondisi: sangat baik (bekas), Edgebander HOLZ-HER Auriga 1308 XL - used - PC control with monitor, touchscreen, swiveling control panel, program memory, automatic pressure bridge adjustment, feed via transport chain, extendable workpiece support, diamond jointing cutters for both climb and conventional milling, strip magazine, standby function, Glu Jet cartridge system, cartridge system with sensor-controlled nozzle, suitable for use with PUR adhesives, pressure unit with driven roller, pneumatic control of the pressure unit, cross-cut saw with 2 HF motors, pneumatically tiltable cross-cut saw, flush/radius trimming unit, motorized positioning control for trimming unit, diamond-coated milling tools, blow-off nozzle at the trimming unit, corner copying unit with diamond-coated cutter, radius scraper with motorized positioning, blow-off nozzle at the radius scraper, usage-activated surface scraper, blow-off nozzle at the surface scraper, spraying device for release agent, spraying device for cleaning agent, buffing unit ----- Technical Data ----- Edge thickness (coil): 3 mm, Edge thickness (strip): 5 mm, Workpiece thickness: 60 mm, Min. workpiece length: 160 mm, Feed speed: 10 m/min, Workpiece support distance: 480 mm, Support plate diameter for edge material: 800 mm, Guillotine shears for coil edge up to: 3 mm, Heating time: 3.5 min., Jointing cutter power: 0.8/1.2 kW, Cross-cut saw power: 2x0.45 kW, Trimming station power: 2x0.65 kW, Corner copying power: 0.3 kW, Buffing power: 2x0.09 kW, Extraction port diameter (jointing unit): 2x80 mm, Extraction port diameter (cross-cut saw): 2x70 mm, Extraction port diameter (milling unit): 100 mm, Extraction port diameter (scraper unit): 120 mm, Compressed air connection: 6 bar, Total length: 5,000 mm, Dimensions (LxWxH): 5,000x1,250x1,720 mm, Weight: 1,300 kg Quality Information: - All settings checked - Set according to manufacturer's specifications - New heating unit - Cartridge system tested for leaks - Complete basic inspection performed - Complete basic cleaning performed - Electrical system checked - Pneumatics checked Gsdpfxsy T D N Ae Am Sebn - Immediately ready for use

Kondisi: baru, Edge banding machine HOLZ-HER 1308 XL AURIGA POWER -Demonstration machine- New: GLUJET GJ725 This offer includes an equipment package. The following components and options are already included in the price: - Extendable workpiece support - Edge Control PPC 322 W controller - ECO MODE energy-saving function - Jointing cutter unit FG201 with 2 milling heads - Diamond cutter Ø 70 x 64 x 30 mm, Z2+2, left-hand rotation - Diamond cutter Ø 70 x 64 x 30 mm, Z2+2, right-hand rotation - Edge feed 1903 - Glue application system Glu Jet GJ725 NC PUR PRO - Pressure unit 1912-3 pneumatic - End trimming unit 1918 pneumatic 60 mm - Multifuntional milling unit FR301 MOT6 - Diamond cutter Ø 56/60 mm, left-hand rotation - Diamond cutter Ø 56/60 mm, right-hand rotation - Corner rounding unit FF301 MOT1 - Scraper unit ZK301 MOT4 including high-gloss package - Carbide reversible knives for scraper holder - Chip collection box for scraper unit - Buffing unit 1940 - Spray unit TR301 for infeed and outfeed areas - Motorized pressure bridge adjustment - iTronic adaptive pressure and glue quantity control - Long infeed fence 1,252 mm Gbjdju R Sy Aepfx Am Sjn - Motorized infeed fence adjustment - Pressure unit DW301 with motorized NC axis - Extraction hoods for end trimming unit 1918 - Shelf board program - Flat scraper FK701 - Spray unit GM301 after pressure unit - new demonstration machine -

Kondisi: bekas, machineseeker-uno-1303-holzher Gedpfx Aoy Tuylem Sebn

Kondisi: bekas, Tahun pembuatan: 2001, Ketebalan benda kerja min./maks.: 6/45 mm; ketebalan edge banding: 0,4 - 3 mm; tinggi maksimal edge banding: 51 mm; panjang minimal strip edge banding: 350 mm; kelebihan tinggi edge banding per sisi maks.: 3 mm; lebar benda kerja min.: 60 mm; panjang benda kerja min.: 180 mm; panjang total: 3700 mm; lebar: 1440 mm; tinggi maks.: 1970 mm; tinggi masuk benda kerja: 850 mm; berat: sekitar 850 kg. Lokasi penyimpanan: Nattheim. Godpfxoy Dd Iys Am Ssbn