Beli Holz-Her Sprint 1312 bekas (7.616)

Kondisi: bekas, Tahun pembuatan: 2006, Used machine Year of manufacture: 2006 Condition: completely overhauled Features and technical data: - Equipped with a new glue application system - Infeed fence, manually adjustable - Milling unit 1961 - Edge feed unit 1903 - Glue application station 1906 with sensing nozzle Hedpfxswka H Ss Al Ijl - Pressing unit 1816, pneumatic - End trimming unit 1822 - Milling unit 1942 M (radius, chamfer, flush trimming) - Complete air nozzle - Scraper station 1929 - Chip collection box - Area scraper 1964 - Extraction hood set - Complete safety covers - Total length: 5,291 mm - Workpiece thickness: min. 6 / max. 50 mm - Edge material thickness depending on configuration: 0.4–5 mm - Edge height max.: 55 mm - Edge strip length: min. 350 mm - Edge overhang/height per side: max. 3 mm - Workpiece width: min. 60 mm - Workpiece length: min. 180 mm - Feed speed: 12.5 m/min - Extraction: - Jointing milling unit: 900 m³/h - Milling unit: 280 m³/h - Scraper station: 280 m³/h - Static negative pressure: - Jointing milling unit: 1,490 Pa - Milling unit: 1,650 Pa - Minimum air velocity: 20 m/sec - Jointing milling unit connection: 70 mm - Scraper connection: 70 mm - Compressed air: 6 bar Availability: short-term Location: Röllbach

Kondisi: bekas, Holz Her Sprint 1312 FÜ + PU Desain berat - ketebalan tepi 0,4 - 12 mm Kontrol layar SPS Unit pra-pemotongan untuk persiapan sebelum pengeleman Majalah tepi otomatis penuh untuk material gulungan dan potongan Stasiun aplikasi lem: sistem cartridge + lem PU nozzle deteksi otomatis Hjdpfx Asx Eilqol Iol Tinggi benda kerja 6-55 mm Unit pemotong untuk gulungan dan potongan hingga ketebalan tepi 12 mm dengan penyesuaian kemiringan gergaji 0-10° Unit milling, milling rata hingga 12 mm, milling radius - chamfer milling - 15° MOT - 4 sumbu Unit pisau tarik untuk chamfer dan radius dengan 2 holder pisau tarik pneumatik penyambungan pneumatik masuk dan keluar Unit pisau tarik permukaan - finishing Sistem penyemprotan - PU Mesin dalam KONDISI SANGAT BAIK tersedia dari stok di Lieboch

Kondisi: bekas, Tahun pembuatan: 2020, nomor mesin/kendaraan: 462/2-003, The undersigned, DDG INSOLVENCY I.P.U.R.L., headquartered in Cluj-Napoca, 115 Septimiu Albini Street, Cluj County, VAT no. RO27987796, reg. no.: 2A0522, represented by insolvency practitioner Godorogea Daniel-Lucian in his capacity as judicial liquidator of ELEMENTO MOBILI S.R.L. – in bankruptcy, with its registered office in Dej Municipality, 6 Dumbrava Roșie Street, ground floor, apt. 1, Cluj County, registered with the Trade Register attached to Cluj Tribunal under no. J12/2389/2016, unique registration code 36225390, appointed as such by Civil Ruling no. 1278 of 03.07.2025 pronounced by the Cluj Specialised Tribunal in case no. 442/1285/2025, hereby organizes a public auction with ascending bids for the sale of the asset(s) specified in this announcement. The first auction will take place on 11.02.2026 at 15:00 at the DDG Insolvency I.P.U.R.L. premises in Cluj-Napoca, 115 Septimiu Albini Street, Cluj County. In the event of no successful sale, the auction will be repeated on 18.02.2026, 25.02.2026, 04.03.2026, 11.03.2026, 18.03.2026, under the same conditions and at the same time. For asset inspection, the liquidator will schedule a viewing day on 04.02.2026 between 10:00-14:00. Interested parties are invited to contact the judicial liquidator and express their intention to participate prior to the scheduled date. In the event of a successful sale, the judicial liquidator will issue the fiscal invoice for the value of the asset(s) awarded. The conversion of the sale price into RON will be made on the date of the invoice using the exchange rate published by the National Bank of Romania for that day. The minimum bid increment is 5% of the starting price. The terms of reference for participation in the auction will be drawn up by the judicial liquidator in accordance with industry practices, contain the auction rules, and will be sold by the insolvency practitioner at a price of 500 RON + VAT for assets up to 5,000 EUR and 1,000 RON + VAT for assets over 5,000 EUR. The terms can be purchased at the liquidator's office or by phone, in which case they will be sent via email. Hodsyfg Dfepfx Al Isl The participation guarantee will be 10% of the starting price. This, together with the required documentation for registration, must be submitted at least 24 hours before the auction date at the liquidator's office. The participation guarantee will be deducted from the price of the asset(s) for the successful bidder and refunded to those who are not declared winners. In the event of equal bids, the successful bidder will be the person who commits to pay the full price in the shortest possible time. The payment term for the sale price will be 5 working days from the adjudication date. If the remaining price is not paid, the successful bidder will lose the participation guarantee paid as a deposit and will be excluded from participation in subsequent auctions.

Kondisi: bekas, Tahun pembuatan: 2019, Used machine Year of manufacture: 2019 Condition: Good (The machine has undergone extensive annual maintenance. Last serviced in March 2026!) Equipment: - iTronic – Adaptive pressure and glue quantity control with automatic, program-dependent fine adjustment - SPS-controlled infeed fence adjustment - Automatic chain lubrication – Intelligent automatic transport chain lubrication - Edge Control 19 control system - EL GRM GRADUAL. 400V50HZ 2.2KW V2 SPRINT 1329 PERFORMANCE 400V50HZ Edge Control 19 control system with 18.5" touchscreen color display, 16:9 format ECO MODE energy-saving mode (automatic standby mode) Planing unit 1802 (2 x 2.0 kW, 200 Hz, 12,000 rpm) with 2 planing units for trimming the panel edge Milling cutter, diamond Ø 70 x 64 x 30 mm, Z2+2, left-hand rotation. Air Stream System (HOLZ-HER / LEUCO patent) Milling cutter, diamond Ø 70 x 64 x 30 mm, Z2+2, right-hand rotation. Air Stream System (HOLZ-HER / LEUCO patent) Edge feed 1901 SYNCHRO – Automatic transport for roll and strip material Glue application station Glu Jet GJ301 automatic (2.3 kW, 50 Hz) DW501 SPS MOT. SPRINT MOTORIZED Spray unit GM501 after the printing unit with lubricant. Recommended for high-gloss edges End trimming unit 1918 (60 mm) pneumatic (2 x 0.45 kW, 12,000 rpm), pneumatically tiltable 0/10° Milling unit FR701 100% repeat accuracy at the push of a button thanks to backlash-free mechanics Air Stream System Multi-cutter, diamond Ø 70.9 x 16 mm, Z = 2+2 Air Stream System Multi-cutter, diamond Ø 70.9 x 16 mm, Z = 2+2 Contour milling unit FF701 100% repeat accuracy at the push of a button thanks to backlash-free mechanics Milling cutter, diamond Ø 72.5 mm x 19 mm, Ø 20 mm Z = 4, Radius R = 2 mm, left-hand rotation with CM technology Milling cutter, diamond Ø 72.5 mm x 19 mm, Ø 20 mm Z = 4, Radius R = 2 mm, right-hand rotation with CM technology Scraper unit 1929 MOT4 incl. high-gloss package with motorized adjustment of sensing rollers HW reversible inserts for scraper holder, R = 2.0 mm (2 pcs required) Flat scraper FK701 With pre- and post-tracking for removing glue residue Hodpey Hyl Tjfx Al Ijl Spray unit TR501 for infeed and outfeed (separating + cleaning agents) Incl. nesting shoes bottom with their own spray unit Location: Hesse Availability: Approx. July 2026

Kondisi: bekas, de-en Hodpfoy Ewv Hsx Al Isl

Kondisi: bekas, Tahun pembuatan: 2014, de Hjdpfjx Huhcjx Al Iol

Kondisi: bekas, Tahun pembuatan: 2003, tinggi total: 1.750 mm, panjang total: 6.000 mm, lebar total: 1.600 mm, Weight: 3,000 kg - Year of manufacture: 2003 - Documentation available: No - CE certificate available: No - Serial number: 470/0-303 - Number of units: 8 - 1st unit type: - Tools included: No Hsdeyz Uu Eopfx Al Isl - 2nd unit type: Glue station - 3rd unit type: Pressure rollers - Tools included: Yes - 4th unit type: End trimming station - Tools included: Yes - 5th unit type: Rough milling unit - Tools included: Yes - 6th unit type: Fine milling unit - Tools included: Yes - 7th unit type: Corner rounding unit - Tools included: Yes - 8th unit type: Scraper unit - Tools included: Yes - Voltage [V]: 400 - Transport dimensions: 6000mm x 1600mm x 1750mm (L x W x H) - Transport weight [kg]: 3000kg - Number of transport packages: 1 Financial Information VAT: The stated price is exclusive of VAT VAT/margin taxation: VAT deductible for businesses Delivery and trade-in possible at any time for any industrial equipment Yorick Diebels

Kondisi: bekas, Tahun pembuatan: 2013, Used machine Year of manufacture: 2013 Features and technical specifications: - Machine completely overhauled: - New Glue Jet 301 gluing system (top part 1 mm) - All units checked - All cutters resharpened - All blades replaced - Feed speed: 10 - 18 m/min - Workpiece length: min. 160 mm - Workpiece width: min. 60 mm - Workpiece thickness: 8 - 60 mm - Edge thickness: 0.4 - 8 mm - Electrical equipment for stepless feed: 400 V / 50 Hz, 2.2 kW - Motorized pressure bridge adjustment - Automatic chain lubrication - PPC 315 control unit with 15" touchscreen - ECO MODE energy-saving mode - Infeed fence 1350 mm, motorized adjustment - Jointing/milling unit 1802: - 2 x 2.0 kW, 200 Hz, 12000 rpm with 2 milling units for jointing the panel edge - Cutter, diamond Ø 70 x 64 x 30 mm, Z2, left rotation for jointing unit - Cutter, diamond Ø 70 x 64 x 30 mm, Z2, right rotation for jointing unit - Fully automatic edge feed 1901 - Automatic glue application station Glu Jet GJ301: - 2.3 kW; 50 Hz - Granulate reservoir - Pressure section 1913 MOT - Pneumatic end trimming unit 1918 (60 mm) - Multifunction milling unit 1826 MOT4 (2 x 0.65 kW): - Air Stream System cutter, diamond Ø 58 mm x 24 mm, Ø 20 mm Z = 2 R = 2.5 mm left rotation - Air Stream System cutter, diamond Ø 58 mm x 24 mm, Ø 20 mm Z = 2 R = 2.5 mm right rotation - Contour milling unit 1833 MOT4: Hedpfx Aowka Iijl Iol - Cutter, diamond Ø 72.5 mm x 19 mm, Ø 20 mm Z = 4 radius R = 2.5 mm, left rotation with CM technology - Cutter, diamond Ø 72.5 mm x 19 mm, Ø 20 mm Z = 4 radius R = 2.5 mm, right rotation with CM technology - Scraper unit 1929 MOT2: - HW reversible knives for scraper holder R = 2.5 mm (2 pcs. required) - Flat scraper 1964 - Polishing unit 1940 (2 x 0.12 kW, 50 Hz, 1400 rpm) Availability: short-term Location: 63934 Röllbach

Kondisi: bekas, Tahun pembuatan: 2001, tinggi total: 1.750 mm, panjang total: 5.650 mm, lebar total: 1.100 mm, machine-ad-001 Hjdpfxoxlqpde Al Isl

Kondisi: bekas, Tahun pembuatan: 2007, tinggi total: 1.900 mm, panjang total: 5.700 mm, lebar total: 1.000 mm, Weight: 1,380 kg Hedpfoyfn Daox Al Ijl - Year of manufacture: 2007 - Documentation available: No - CE marking present: Yes - CE certificate available: No - Serial number: 4684/0-709 - Number of units: 7 - 1st unit type: Pre-milling unit - Tools included: Yes - 2nd unit type: Glue application unit - 3rd unit type: End trimming unit - Tools included: Yes - 4th unit type: Rough trimming unit - Tools included: Yes - 5th unit type: Corner rounding unit - Tools included: Yes - 6th unit type: Radius scraping unit - Tools included: Yes - 7th unit type: Flat scraping unit - Tools included: Yes - Glue system: Glue pot - Transport dimensions: 5700mm x 1000mm x 1900mm (L x W x H) - Transport weight: 1,380 kg - Number of transport packages: 1 Financial Information VAT: The indicated price is plus VAT VAT/refund: VAT is deductible for businesses Delivery and trade-in possible at any time for all items from the industrial sector Yorick Diebels

Kondisi: baik (bekas), 0338 Marke: HOLZ HER Modell: SPRINT 1310 – CE-Standard Automatische Kantenanleimmaschine mit kartuschenbasiertem Leimsystem für Holz-, PVC-, ABS- und Furnierkanten, geeignet für Möbel, Platten, maßgefertigte Einrichtungen, Küchen, Badmöbel, Tischlereien und vieles mehr – CE-Standard Ausstattung: Schneller Leimwechsel: Patentiertes Kartuschensystem, das einen schnellen und effizienten Wechsel zwischen EVA- und PUR-Leim während des Betriebs, sowie den Farbwechsel des Leims ermöglicht – Einfacher Kartuschentausch, kein aufwendiges Reinigen des Leimtanks erforderlich – Einsatzbereit in 3,5 Minuten Technische Daten: Min./max. Werkstückhöhe: 6–45 mm Verarbeitbare Kantenstärke: 0,4–6 mm Maximale Anleimhöhe: 51 mm Mindestplattenbreite: 60 mm Mindestplattenlänge: 180 mm Vorschubgeschwindigkeit: 8 m/min Maschinenausstattung: Leimaggregat: Automatische Zuführung für Rollen- und Streifenkanten – Patentiertes HOLZ HER Kartuschensystem – Andruckrolleneinheit Hjdpoyvh Syefx Al Iel Schwenkbare Vor- und Nachschnittaggregate – 0,22 kW Motoren Multifunktionsaggregat mit gesteuerter Achse für bündiges Fräsen und Fasen – 2 x 0,6 kW Motoren Ziehklingenaggregat für die Kantenbearbeitung Leimrestabstreifereinheit Bürstenaggregat für perfekte Reinigung HOLZ HER Steuerung: Schwenkbares und neigbares Bedienpanel – Alle Aggregate individuell schaltbar – Aggregatefunktionen mit Text- und grafischer Anzeige – Anzeige für Aggregatvorwahl – Programmliste mit Namen und Nummern – Selbstdiagnose Schallschutzkabine Druckluft 6–7 bar Abmessungen (L x B x H): 4300 x 1200 x 1675 mm Gewicht: 1700 kg

Kondisi: bekas, Tahun pembuatan: 2008, Used machine Year of manufacture: 2008 Edge Control system with 18.5" touchscreen color display 16:9 Swiveling control panel Program memory Motorized pressure bridge adjustment Feed via transport chain Feed rate: 8-18 m/min Extendable workpiece support Motorized adjustable infeed fence Jointing unit 1961 Diamond jointing cutter for climb and counter-rotation Automatic adjustment to workpiece height Edge feeding unit 1903 Pre-trimming up to 3 x 45 mm (material dependent) 1905 Multi-System glue application system Automatic glue height adjustment with sensor nozzle Pressure regulator for adjusting cartridge pressure PUR adhesives can be used Pressing unit 1913 MOT, 1st roller driven End trimming unit 1918 with pneumatic adjustment End trimming saw pneumatically tiltable Multi-function unit 1824 MOT 4 with multi-profile cutter, profiles 1,2,3 mm Corner copier unit 1832 Corner copying function up to 3 mm edge thickness Radius scraper 1929 MOT 2 with motorized adjustment of horizontal tracing rollers and pneumatic adjustment (top and bottom separate) Hedpfsv Sv Enjx Al Ijl Chip collection box for radius scraper Flat scraper 1964 for removing glue residue for a clean glue joint With extraction hoods Spray unit 1856 for infeed and outfeed zone Buffing unit 1940 for finishing and edge polishing ----- Technical Data ----- Edge thickness, coil material: 3 mm Edge thickness, strip material: 8 mm Max edge thickness for corner copying: 3 mm Workpiece thickness: 45 mm Workpiece thickness for corner copying: 45 mm Min. workpiece length: 180 mm Feed speed: 8-18 m/min Distance to workpiece support: 470 mm Support plate diameter for edge material: 800 mm Cutting knife for coil material up to: 3 mm Heat-up time: 3.5 min Jointing cutter power: 2 x 2 kW End trimming saw power: 2 x 0.22 kW Milling station power: 2 x 0.35 kW Corner copying power: 0.22 kW Extraction port, jointing unit: 120 mm Extraction port, milling unit: 70 mm Extraction port, scraper unit: 70 mm Total length: 5,350 mm Dimensions (LxWxH): 5,350 x 1,669 x 1,940 mm Photo of operating hours taken in 2022 Availability: short-term Location: Röllbach

Kondisi: bekas, Tahun pembuatan: 1999, Holz-Her SPRINT 1411 Kantenanleimmaschine Beschreibung Werkstückdicke min./max.: 6/45 mm Automatischer Kantenmagazin (Kantenband bis 5 mm) Werkstückbreite min.: 60 mm Werkstücklänge min.: 180 mm Patronenleimsystem (kurze Aufheizzeit 2-3 min) Kappaggregat Bündigfräsaggregat Ziehklingenaggregat (flach) Poliereinheit (Bürsteinheit) Hjdpfx Aljw Ebrxs Iel CE (Trotz größter Sorgfalt sind alle Änderungen und Irrtümer in den technischen Daten, Preisen und Angaben vorbehalten! Keine Gewährleistung auf gedruckte Daten. Verfügbarkeit vorbehaltlich Zwischenverkauf.)

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, Kanter HOLHER SPRINT 1417 ini memiliki operasi berikut: -praj-gilingan (pre-milling) -pemotongan Hsdjyg Er Rjpfx Al Ijl -pemotongan secara presisi -mata router radius -cyclone radius -radial copy shaping -pembersih cyclonic lurus -pemoles

Kondisi: bekas, Tahun pembuatan: 2003, Used machine Year of manufacture: 2003 Hsdswka Nyopfx Al Ijl Equipment and technical data: - Control system with LCD display - Swiveling operator panel - Program memory - Manual pressure beam adjustment - Feed via transport chain - Extendable workpiece support Jointing unit 1961: - 2 x 2.0 kW - Diamond jointing cutters, both conventional and climb milling Edge magazine 1903: - Support plate 820 mm, max. loading capacity 40 mm - Automatic feed for rolls and strip material Glue application system 1906: - Cartridge system with sensing nozzle - With automatic reloading - Suitable for PUR adhesives Pressure station 1816: - Driven roller - Pneumatic control of pressure station End trimming unit 1918: - 2 x 0.22 kW - Swivels from 0° to 10°, pneumatically adjustable Milling unit 1942 MOT 2: - For flush, radius, and chamfer milling - Motorized adjustment - Air nozzle at the milling unit Corner copy unit 1832: - Corner copying up to r = 3 mm, postforming up to r = 6 mm Radius scraper unit 1929 MOT 2: - Plastic edges up to 3 mm - Chip collection box for radius scraper Flat scraper 1964: - Operation-controlled flat scraper - Air nozzle at the flat scraper Buffing unit 1940 Edge thickness for roll material: 3 mm Edge thickness for strip material: 5 mm Max. edge thickness for corner copying: 3 mm Workpiece thickness: 6–45 mm Workpiece thickness for corner copying: 45 mm Minimum workpiece length: 180 mm Feed speed: 8 m/min Workpiece support distance: 470 mm Support plate Ø for edge material: 800 mm End trimming knife for roll material up to: 3 mm Heat-up time: 3.5 min Jointing cutter power: 2 x 2 kW End trimming saw power: 2 x 0.22 kW Milling station power: 2 x 0.6 kW Corner copying power: 0.22 kW Suction connection jointing unit: 120 mm Suction connection milling unit: 70 mm Suction connection scraper unit: 70 mm Dimensions: 5,350 x 1,669 x 1,940 mm Weight: 1,200 kg Location: Röllbach Availability: short-term

Kondisi: bekas, Tahun pembuatan: 2004, Used machine Year of manufacture: 2004 Equipment and technical data: Edge feed for coil and strip material Jointing milling unit with 2 milling heads Cartridge glue application system 3-roller pressure unit End trimming saw unit Radius milling unit Radius scraper unit Corner rounding unit Flat scraper Buffing unit Hsdpjvymdqjfx Al Isl Workpiece thickness min./max.: 6/50 mm Edgebanding thickness: 0.4-15 mm Maximum edgebanding height: 55 mm Minimum strip edgebanding length: 350 mm Maximum edge overhang per side: 3 mm Minimum workpiece width: 60 mm Minimum workpiece length: 180 mm Feed speed: 12.5 m/min. Machine dimensions (L x W x H): 6,480 x 1,250 x 1,690 mm Availability: short notice Location: Flörsheim

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2001, nomor mesin/kendaraan: 315/0-110, Fungsionalitas: berfungsi sepenuhnya, Control panel at top Edge feed 1902 Glue application station 1906 Cut-off shear 1902 Pressure unit 1816 Cutting unit 1918 Milling unit 1942M Rounding scraper 1929 Profile milling unit 1983 Flat scraper 1964 Buffing unit 1940 Weight approx. 970 kg Compressed air connection 6 bar Extraction connection Ø 120 mm Hedpfx Alsh Ux Suj Isl Length approx. 5300 mm

Kondisi: sangat baik (bekas), Tahun pembuatan: 2005, Brand: HOLZ HER Model: SPRINT 1310 - CE Standard Automatic edge banding machine with cartridge-based glue system for processing wood, PVC, ABS, and veneer edges. Suitable for furniture, panel materials, custom productions, kitchens, bathroom furniture, joineries, and much more – CE-compliant. Technical Data: Min./Max. panel height: 6 – 45 mm Edge thickness: 0.4 – 6 mm Maximum glue height: 51 mm Minimum panel width: 60 mm Minimum panel length: 180 mm Feed speed: 8 m/min Compressed air: 6–7 bar Hedpfx Aley Emw He Isl Machine Features: Automatic feed for coil and strip material Cartridge glue system, allows switching between EVA and PUR glue during operation or changing glue color 3 pressure rollers, 1 driven End trimming unit with 2 motors 0.22 kW each Multi-function unit with controlled axis for flush and chamfer milling, 2 motors 0.6 kW each Flat scraper unit Radius scraper unit Buffing unit Acoustic hood Control: Pivoting and swiveling control panel All units can be individually activated Function display with text and graphics Pre-selection display of units Program list with names and numbers, self-diagnosis Approx. machine dimensions: 3900 x 1050 x 1800 mm (H) Weight: 1000 kg INCLUDES OTT Rondomat – Corner Rounding Unit Note on used machines: • Subject to technical changes and prior sale. • Prices stated are ex works – loaded free of charge! • The machine has been cleaned and function-tested. • All machines are sold as-inspected without any warranty or guarantee. Buyers are welcome to inspect the machine at our location. • Special agreements are only valid in written form. (We respond to inquiries only if you provide your address and telephone number!)

Kondisi: bekas, Edge bander Holzher Sprint 1317 Mata bor awal Pengolesan lem, lem cartridge Gilotin pneumatik awal Roll penekan Gergaji potong Mata bor atas-bawah Pembentukan sudut Hedpfxox Tf D Uj Al Ijl Pisau siklin profil Pisau siklin datar Polisher Maks. tinggi edging mm: 50 Tebal edging pada roll: 3 mm Kecepatan feeding: 10 m/menit Mesin membutuhkan servis serta pengaturan dan kalibrasi. Mesin dapat dinyalakan, semua unit berfungsi, namun gergaji depan tidak merespon material dan unit pembentukan sudut membutuhkan pengaturan.

Kondisi: bekas, Tahun pembuatan: 2021, Fungsionalitas: berfungsi sepenuhnya, Dijual: Holz-Her 1329 Multi Edgebander Premium + Return-Master 5920 Kami menawarkan mesin edging Holz-Her 1329 Multi kelas atas, lengkap dengan sistem pengembalian Return-Master 5920. Unit ini berusia 4 tahun dan dalam kondisi sangat baik. Harga Baru Asli: €138.000 + PPN Harga Kami: €69.000 + PPN (hemat 50%) Mengapa memilih mesin ini? Dapatkan mesin premium bekas ringan dengan harga yang setara mesin subsidi, namun tanpa birokrasi, dokumen, atau kewajiban jangka panjang dari aplikasi hibah. Perawatan: Diservis secara berkala oleh tim teknisi ahli Dimpex. Hedsygrghspfx Al Iel Performa: Versi "Multi" dengan spesifikasi tinggi untuk kebutuhan produksi yang fleksibel. Hanya untuk pembeli serius.

Kondisi: bekas, Holz-Her Auriga 1308 XL compact design – edge thickness 0.4–8 mm SPS control panel Edge-Control, PPC color touchscreen monitor iTronic adaptive pressure and glue quantity control with cleaning routine pre-milling unit for bonding preparation automatic edge magazine for coil and strip material glue application station GLU JET cartridge + PU bonding, with sensor nozzle workpiece height 8–60 mm High-gloss package Hodjy Icmpepfx Al Iol pneumatic pressure unit pneumatic end trimming unit for coil and strip material up to 8 mm edge thickness with pneumatic adjustment for miter angles from 0–10° multifunctional milling unit 1827 MOT4 for flush trimming up to 8 mm, radius and bevel trimming at 15° via NC axes profile milling unit for corner rounding up to 3 mm edge thickness, working height 12–60 mm, postforming possible scraper unit 1929 MOT4 for bevels and radii with 2 scraper holders via NC axes surface scraper unit FK701 with pre- and finish-sensing – finishing buffing unit – polishing spray device at infeed and outfeed spray device with lubricant for high-gloss edges complete DIA tool set included First delivery 2020 Machine is in TOP CONDITION from lease return – small business available ex-stock, Lieboch

Kondisi: bekas, Tahun pembuatan: 2005, Used machine Year of manufacture: 2005 Equipment and technical specifications: - Base machine 555 - Working dimensions for edge processing: - X = 3514 mm - Y = 1544 mm - Maximum working dimensions: - X = 3868 mm - Y = 1746 mm - Z = 325 mm - Workpiece support with 8 pneumatically clamped consoles - Drilling unit 7968: - 18 vertical drilling spindles with 32 mm pitch - 12 in X-axis and 6 in Y-axis - individually selectable - T-shaped arrangement - Max. drilling diameter: 35 mm (depending on panel thickness) - Spindle travel: 70 mm - Rotation direction: alternating right/left - Speed: 4,725 rpm, steplessly adjustable - 2 horizontal drilling units in X direction, 1 horizontal drilling unit in Y direction - Saw unit 7946: Hsdpfxjx Enpqe Al Ijl - Motor: 3.5 kW - 90° pneumatically swivelling - Speed: 5,300 rpm - Tool holder A Ø = 200 mm, I Ø = 30 mm, B = max. 3.5 mm - Sawing/grooving in X and Y directions - Milling unit 7935: - with 6 kW spindle, water-cooled - Milling unit 7982: - for lock case milling - Tool changer 7996: - 18-position magazine (carousel type) - Vacuum pump with 140 m³/h - Handheld control unit - PC control with TwinCAM WOP system - Siemens control Availability: short-term Location: 63934 Röllbach

Kondisi: bekas, Tahun pembuatan: 2013, Used machine Year of manufacture: 2013 Equipment and technical specifications: - Controller with 15" touch screen - Jointing milling unit with 2 milling heads - Edge feed system - GluJet 301 glue application system: 2.3 kW, automatic glue height adjustment, sensing nozzle - Pressure unit: pneumatic - End trimming unit: pneumatic - Diamond cutters left + right: with CM technology - Corner copying unit with diamond cutters - Surface scraper - Buffing unit - Extendable workpiece support - Motorized pressure bridge adjustment with NC axis via program control - Extraction hoods for end trimming unit Hsdpfx Alsyxyaho Iol - Multifunctional milling unit: MOT 4 - Vertical tracing rollers: pneumatic - Pneumatic tilting device for milling unit MOT 4 - Scraper unit MOT 2 with chip collection box - Spray unit for infeed and outfeed area - Minimum workpiece length: 160 mm - Workpiece thickness: 6-60 mm - Edge thickness: 0.4-6 mm - Feed speed: 10 m/min - Total length: 4930 mm - Weight: 1420 kg Availability: short term Location: 63934 Röllbach

Kondisi: bekas, Tahun pembuatan: 2019, used-machine year of manufacture: 2019 Features and technical specifications: - For classic nesting processing with wear plate - Machine frame in welded construction, equipped with ground and hardened prism guides for the gantry, aggregate head, and consoles - Gantry-type bridge design - Helical rack-and-pinion drive in X and Y axes, ball screw in Z axis for precise positioning - Working dimensions: - Maximum support surface on nesting table: X = 3100 mm Y = 1560 mm - Maximum travel paths: X = 4695 mm Y = 2100 mm Z = 293 mm - Maximum clearance height over DYNESTIC table Z = 100 mm from table surface (without wear plate) - Maximum programmable speed Vector speed: 128 m/min X = 80 m/min Y = 100 m/min Z = 25 m/min - DYNESTIC Table: - Fixed, continuous working table with grid division - Continuous grooves in X and Y direction - Groove spacing: 50 mm - Includes 25 meters sealing cord for clamping the wear plate - Vacuum fields: Single-circuit vacuum system - Drill Unit 7877: - 19 spindles - Drive power: 1.7 kW - 13 vertical spindles: - Individually selectable - U-shaped arrangement - 5+4 in X and 4 in Y direction - 32 mm pitch - Max. drill diameter: 35 mm - Total drill length: 70 mm from connection end (depending on panel thickness) - Spindle projection stroke: 70 mm - Rotation direction: Alternating right/left - n(max): 1,000 - 4,400 rpm, stepless control - Tool holder: M10 thread – 11 mm fitting - Without tools and holders - 6 horizontal spindles: - 2 double-drilling spindles in X direction - 1 double-drilling spindle in Y direction - Tool holder: M10 thread, 11 mm fitting - Max. total drill length: 63 mm from connection end - Without tools and holders - Milling Unit 7842: - Power: 12.0 kW (S6) - n(max): 1,000 – 24,000 rpm, stepless control - Max power at 12,000–24,000 rpm - Air-cooled - With HSK-F 63 tool holder - With right-hand thread nut (for right-rotating tools) - With collet chuck with HSK shank - Hybrid ceramic ball bearings - Max tool weight: 6 kg (including holder) - Tools: Milling and sanding tools, max. Ø160 mm - Safety housing according to CE standard - Lateral and rear safety fence - Vacuum pump: 500 m³/h, dry-running - Operator safety with light barriers in the front machine area - Handheld operating unit for remote machine control with the following functions: - Start/Stop machining program - Speed control for machining cycles - Reset button - Manual feed/rapid traverse for all axes - Emergency stop - CAMPUS V7 CAD/CAM software, 1x machine license consisting of: - CAMPUS NC-HOPS: - Graphic variant system with WOP and CAD/CAM functions for creating part variants with macro technology - CAMPUS MT-Manager - CAMPUS Workcenter - CAMPUS DXF interface - Automatic central lubrication - Automatic lubrication at defined intervals - Additional dust sealing by overpressure in each guide carriage Hjdpfx Aewka Upjl Iel

Kondisi: bekas, Tahun pembuatan: 2005, Mesin bekas Tahun pembuatan: 2005 Kondisi: Rel pemandu sedikit aus, hanya cocok untuk pemotongan kasar Perlengkapan dan data teknis: - Panjang potong: 4300 mm - Ketinggian lewat maksimum: 2200 mm - Ketinggian pemangkasan maksimum: 2100 mm - Ketinggian scoring vertikal maksimum: 2100 mm Hsdpfx Aowqifkel Isl - Kedalaman potong: 80 mm - Motor: 5,5 kW - Kecepatan putar mata gergaji: 4500 rpm - Diameter mata gergaji: 300 mm - Ekstraksi debu: 2 x 100 mm - Konsumsi udara bertekanan: 60 NL/menit Dimensi: 5620 x 1480 x 2990 mm Ketersediaan: segera Lokasi gudang: Flörsheim