Beli Hplc (Kromatografi Cair Kinerja Tinggi) bekas (16.033)

Kondisi: bekas, Dionex / ThermoFisher FLM: Temperature range: 5–70 °C (max. 15 °C below ambient temperature) Temperature accuracy: ±0.5 °C Temperature stability: ±0.1 °C Temperature precision: ±0.1 °C Column capacity: Up to 3 columns, max. 30 cm length Heating time: From 20 to 50 °C in less than 25 min (at 23 °C ambient temperature, ±0.5 °C) Cooling time: From 50 to 20 °C in less than 35 min (at 23 °C ambient temperature, ±0.5 °C) Control: All functions software-controlled via USB 1.1 I/O interfaces: 2 digital inputs, 2 programmable relay outputs Column identification: Electronic identification system for 3 columns Switching valves: 1 or 2 thermostated microvalves with low dispersion (10 ports or 6 ports) Flow splitter: Nano-, capillary- or thermostated micro-flow splitter with flow splitter identification system Flow control: Electronically controlled and actively balanced flow splitter, independent of solvent composition and back pressure Column flow rate range: 50 nL/min to 2.5 mL/min using a predefined splitter and active flow control Flow rate selection range: 50 nL/min to 1000 nL/min (using a nano-LC splitter) 0.5 μL/min to 10 μL/min (with a capillary LC splitter) 10 μL/min to 160 μL/min (with a micro-LC splitter) Gradient delay time: Typically < 1.5 min at 200 nL/min to splitter output Max. column pressure: 35 MPa (4900 psi) Wetted parts: Fused silica, stainless steel (1.4571, 316L), PEEK; Waste line: PTFE, aluminium oxide (Al2O3) Safety features: Moisture sensor, gas sensor, and leak detector for the flow control valve VWD Optical design: Dual-beam photometer (monochromator) Multi-wavelength UV/VIS detector Light source: VWD-3400RS: Deuterium lamp and tungsten lamp Temperature control for both lamps Lhedpezikcxsfx Ac Hjk Wavelength range: 190 to 900 nm Tungsten lamp recommended for wavelengths > 600 nm. Noise: At one wavelength:

Kondisi: bekas, Penawaran ini adalah untuk Sistem Kromatografi Cair GE Healthcare AKTAprocess 1/2' Unit ini dalam kondisi berfungsi penuh dan siap digunakan segera. Anda dapat melihatnya dengan perjanjian di Duxford. ÄKTAprocess adalah sistem kromatografi cair skala proses yang sepenuhnya otomatis, dirancang untuk pemurnian dan pembuatan produk biofarmasi. Sistem ini menyediakan kontrol proses otomatis dan dapat dikonfigurasi untuk aplikasi kromatografi skala besar, dengan dukungan perangkat lunak UNICORN. Fitur Utama: Otomatisasi & Kontrol Tingkat Lanjut: Ledsxxycgspfx Ac Hjhk Sistem Kromatografi Cair Otomatis: Memastikan pemisahan yang tepat dan dapat diulang. Perangkat Lunak Kontrol UNICORN: Menyediakan kontrol dan pemantauan proses yang intuitif. Opsi Konfigurasi Pasca Pembelian: Meningkatkan kemudahan penggunaan dan memperpanjang masa pakai sistem. Skalabilitas & Fleksibilitas: Dirancang untuk Pembuatan Bio Skala Besar: Mendukung peningkatan skala yang lancar dari laboratorium ke produksi. Konfigurasi yang Dapat Disesuaikan: Ribuan kemungkinan pengaturan untuk berbagai aplikasi. Tiga Rentang Laju Alir: Menangani hingga 1.800 L/jam, memungkinkan produksi volume tinggi. Kualitas & Kepatuhan: Dibuat dengan Bahan USP Kelas VI: Konstruksi yang dapat dilacak dan sesuai dengan peraturan. Pengisian Kolom AxiChrom Cerdas: Memastikan kinerja pemisahan yang optimal. Dokumentasi & Layanan Regulasi Lengkap: Mendukung kepatuhan cGMP. Desain yang Ringkas & Mudah Digunakan: Komputer Terintegrasi: Mengurangi ruang yang dibutuhkan dan meminimalkan kekacauan di area produksi. Konstruksi yang Kuat & Andal: Didesain untuk pengoperasian jangka panjang di lingkungan industri. Spesifikasi: Berat 450 kg (990 lbs) Dimensi (cm) 41P × 33L × 64T Dimensi (inci) 16P × 13L × 25T Manfaat: Dioptimalkan untuk Peningkatan Skala Bioproses: Peralihan yang lancar dari sistem skala kecil. Kepatuhan Regulasi: Mendukung persyaratan cGMP dengan dokumentasi lengkap. Sangat Dapat Dikonfigurasi: Dapat disesuaikan dengan berbagai kebutuhan pembuatan bio. Desain yang Efisien dalam Hal Ruang: Komputer terintegrasi meminimalkan kebutuhan ruang kerja. Aplikasi: ÄKTAprocess ideal untuk produksi biofarmasi, termasuk: Pemurnian Antibodi Monoklonal Produksi Vaksin Pemurnian Protein Rekombinan Terapi Gen & Pemrosesan Terapi Sel

Tahun pembuatan: 2018, Kondisi: hampir baru (bekas), nomor mesin/kendaraan: 228240C0016, Kami menawarkan kipas penghancur berkinerja tinggi Delta Neu C1X63 yang digerakkan oleh sabuk, dengan daya 30 kW, kondisi seperti baru, tahun pembuatan 2018. Produsen: Delta NEU Model: C1X63, digerakkan oleh sabuk, RDO 30kW Lhjdpfx Aezn Ulbsc Hsk Tahun Pembuatan: 2018 Daya: 30 kW Kecepatan putar maksimum: 2700 RPM Tegangan: 3×400 V Jika Anda memiliki pertanyaan atau membutuhkan informasi lebih lanjut, jangan ragu untuk mengirimkan pesan atau menghubungi kami. Kipas penghancur berkinerja tinggi ini dikemas dalam kemasan aslinya dan belum pernah digunakan. Buku panduan/instruksi pengoperasian dalam bahasa Jerman tersedia. Mesin ini berada di 59823 Arnsberg.

Kondisi: baik (bekas), Tahun pembuatan: 1972, Drilling capacity in steel: 70 mm Drilling capacity in cast iron: 80 mm Spindle taper: MT 5 Spindle arm (throat): 400 mm Spindle stroke: 240 mm Column diameter: 250 mm Speed range, stepless: 45 – 1,325 rpm Lodpfx Aot Uzk Rec Hohk 5 feeds: 0.1, 0.14, 0.2, 0.28, 0.4 mm/rev Table size: 880 x 660 mm Motor power: 3 kW Dimensions (L x W x H): 880 x 1,200 x 2,500 mm Machine weight: 1,400 kg Accessories / Special Features: • Infinitely variable speed adjustment via PIV gearbox and countershaft • Large clamping table 880 x 660 mm • Feed via cross lever • Large drilling depth adjustment with fixed stop 240 mm • Swiveling table • Emergency stop switch • Coolant device Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Tahun pembuatan: 2014, Kondisi: baik (bekas), Kipas berkinerja tinggi Zenner, Tipe VTZ 710/63/1 Sonder, tahun pembuatan 2014, terdiri dari lemari kontrol, pengubah frekuensi, dan ruang pengumpan sel. Ljdpfx Acozt Imcj Hohk Data Teknis Produsen: Zenner Ventilatoren Tipe: VTZ 710/63/1 Sonder Tahun Pembuatan: 2014 Volume: 4,72 m³/s Suhu maks.: 80°C Kepadatan: 1,2 kg/m³ Tekanan total: 5.000 pa Kecepatan putar: 2900 1/menit Motor: 55 kW Tegangan: 400/690 V / 50 Hz Berat: sekitar 800 kg Kipas ini dirancang untuk mengangkut kertas/kardus. Dalam proses ini, material juga dicincang. Mesin ini dalam kondisi baik. Mesin ini telah diperiksa dan diuji di fasilitas kami di 28816 Stuhr. Video dapat Anda temukan di situs web atau saluran YouTube kami. Inspeksi, bahkan saat mesin beroperasi, dapat dilakukan kapan saja setelah perjanjian. Jika diminta, panggilan video dapat dilakukan. Harap diperhatikan: Semua data teknis mengacu pada informasi dari produsen. Kami tidak bertanggung jawab atas informasi yang diberikan dan potensi kesalahan apa pun. Penawaran tidak mengikat, tunduk pada penjualan terlebih dahulu, dan dapat dibatalkan kapan saja. Inspeksi dapat dilakukan setelah perjanjian. Penjualan dilakukan di lokasi, tanpa jaminan atau garansi.

Kondisi: baik (bekas), 3D Systems Model: ProX™ 800 ProX™ 800 3D Production Printer by 3D Systems – High-Performance SLA Printer Machine has been regularly serviced Operating hours: 18,700 (as of 18/04/2023) Has not been operated since 18/04/2023 Note: Annual maintenance performed up to dismantling For sale is a used ProX 800 Stereolithography (SLA) production printer by 3D Systems. This large-format SLA system features state-of-the-art printhead technology and is suitable for high-precision components and industrial applications (e.g., automotive, aerospace, medical technology). Additional equipment: Automatic material refill system and preassembled material supply module (rapid module change, uninterrupted operation) 3D-Manage™ software for CAD model and print job management Touchscreen operation on the device (Print3D Pro™) Status/indicator light module, central user guidance Lhjdpfx Aozii Umoc Hok Comprehensive safety system including laser safety monitoring (Class I), emergency stop switches, and safety interlocks Detailed maintenance and error diagnostic functions Material container (MDM) Technical data: Printing technology: Stereolithography (SLA) with frequency-tripled Nd:YVO4 solid-state UV laser (355 nm, max. 3 W) Maximum build volume: approx. 650 × 750 × 550 mm Dimensions (L × W × H): approx. 1370 × 1600 × 2260 mm Weight: approx. 907 kg Resolution: up to 0.00127 mm (laser spot size), 4000 DPI Accuracy: ± 0.025–0.05 mm per inch Materials: wide range of Accura resins (robust, transparent, high-temperature resistant, biocompatible, etc.) Electrical connection: Power supply: 200–240 V AC Frequency: 50/60 Hz Phase: single-phase connection Fuse protection: 30 A Weight: approx. 1200 kg incl. material module Condition: used Scope of delivery: (see image) (Subject to technical changes and errors in the specifications!) If you have further questions, we will be happy to answer them by phone.

Kondisi: baik (bekas), Tahun pembuatan: 2018, Teknologi daur ulang, agregator, pengering mekanis berkinerja tinggi, pengering kering, mesin daur ulang plastik, sistem pengeringan -Kondisi penyerahan: sebagaimana adanya, sesuai dengan hasil inspeksi -Kondisi/cakupan pengiriman: belum diperiksa, sesuai dengan gambar -Produsen: WIPA, pengering kering, pengering mekanis berkinerja tinggi Lodpfxjztndue Ac Hshk -Tipe: MD 1250-3000/90/0,75/3R -Motor penggerak: 90 kW -Panjang drum: 1800 mm -Saringan: lubang berdiameter Ø 5 mm -Dimensi: pengering 4475/2140/T 2630 mm / lemari kontrol 1200/660/T 2195 mm -Berat: 8400 kg / 340 kg

Tahun pembuatan: 2022, Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, Dijual kromatografi cair SCIEX Triple Quad 6500+ dengan Shimadzu LC-40Dx3. Paket lengkap, terawat, alat belum pernah digunakan secara penuh. Dapat dilihat di laboratorium. Silakan hubungi saya. Pembongkaran dan transportasi menjadi tanggung jawab pembeli. Lhedpfx Aeyw Nf Djc Hjk

Kondisi: baik (bekas), High-performance grinding spindle, internal grinding machine, internal grinding device, internal grinding spindle - Delivery: as is, in the condition inspected Lhodpfx Acsvzxlio Hok - Condition: without grinding spindle - Grinding spindle for: lathe - Electric: powered - Motor: VEM 0.75 kW - Mounting: Ø 80 mm - Dimensions: see photos - Overall dimensions: 600/370/H350 mm - Weight: 60 kg

Kondisi: bekas, PFAFF HSE63 High-Performance Screw Jack Gearbox Manufacturer: PFAFF Model: HSE63 Max. Lifting Force: 50 kN Max. Pressure: 50 kN Screw Torque at Max. Lifting Force: 190 Nm Max. Input Shaft Torque: 168 Nm Screw: M16 Worm Gearbox with Oil Lubrication Oil Capacity: 0.7 l Lhsdpfx Ajugty Hec Hjk Screw Shaft Length: 850 mm The price listed refers to 1 unit.

Kondisi: bekas, Tahun pembuatan: 1980, nomor mesin/kendaraan: 258695, 24444-EN Lhjdpfx Asu H Acyoc Hok

Kondisi: hampir baru (bekas), Tahun pembuatan: 2021, High-performance industrial imager Manufacturer: DATALOGIC Lhodpfewbg Drjx Ac Hsk Model: AV500-258W Year of manufacture: 2021 Condition: Used (lightly operated) FEATURES • 5-MP image sensor, 32 FPS • Patented dynamic or adjustable focusing system for enhanced depth of field • Continuous, flicker-free white illumination • Region of interest (ROI) windowing for increased image acquisition speed • Next-generation decoding algorithm for outstanding performance on 1D, 2D, stacked, and postal symbologies • Gigabit Ethernet and SyncNet high-speed interface • PackTrack functionality for minimized item pitch • Image storage in various formats from full resolution to highly compressed JPG • Datalogic’s patented “Green Spot” technology for visual read confirmation • Dual-laser aiming system for easy installation • Browser-based e-GENIUS interface compatible with all operating systems and hardware platforms, including PCs and tablets • Extremely rugged industrial design: IP65-rated for harsh environments, operating temperature from 0 to 50°C COMMUNICATION Interfaces: 2 Ethernet TCP/IP ports, 2 serial interfaces Internal communication interfaces System SyncNet technology Connection modes: Master/Slave, Ethernet point-to-point Programming method: Multilingual e-GENIUS, browser-based, integrated HTML web server interface The AV500 reader sets a new optical benchmark for unattended data capture solutions, featuring a leading-edge 5-megapixel CMOS sensor, 32 frames-per-second image capture, dynamic or adjustable focusing, and a range of lens options. With its wide field of view and excellent depth of field enabled by adjustable dynamic focus options, the AV500 barcode reader is the ideal choice for smart track-and-trace logistics solutions, baggage handling systems, and smart distribution applications in retail.

Tahun pembuatan: 1968, Kondisi: baik (bekas), nomor mesin/kendaraan: 12314, offer-22326 Lhedskt Nqqopfx Ac Hsk

Kondisi: hampir baru (bekas), Tahun pembuatan: 2023, Shimadzu LC-2050C 3D + RF-20AXS – Sistem HPLC Lengkap – 2023 Dijual sebuah kromatograf cair kelas tinggi Shimadzu LC-2050C 3D, dilengkapi dengan detektor fluoresensi Shimadzu RF-20AXS. Kedua perangkat diproduksi pada tahun 2023. Set ini belum pernah digunakan dan dalam kondisi visual yang sangat baik. Konfigurasi Set • Shimadzu LC-2050C 3D – sistem HPLC terintegrasi • Detektor PDA (Photodiode Array) bawaan • Shimadzu RF-20AXS – detektor fluoresensi FLD eksternal • Autosampler terintegrasi • Pendinginan sampel • Termostat kolom • Gradien tekanan rendah empat komponen • Panel sentuh terintegrasi • Komputer Dell • UPS / catu daya darurat • Peralatan dan kabel seperti yang terlihat di foto Shimadzu LC-2050C 3D – Parameter Utama Pompa • Rentang pengaturan laju alir: 0,0001–10 mL/menit • Gradien tekanan rendah empat komponen • Rentang pengaturan gradien: 0–100%, langkah 0,1% • Tekanan maksimum: • 50 MPa pada laju alir 0,0001–3 mL/menit • 44 MPa pada laju alir 3,0001–5 mL/menit • 22 MPa pada laju alir 5,0001–10 mL/menit • Sistem degas terintegrasi untuk fase gerak Autosampler • Dispenser sampel otomatis • Rentang volume injeksi dalam konfigurasi standar: 0,1–100 µL • Akurasi volume injeksi: ±1% pada 50 µL • Kemampuan pendinginan/termostat untuk sampel • Rentang suhu pendinginan sampel: 4–45°C Detektor PDA Versi LC-2050C 3D memiliki detektor PDA (Photodiode Array) terintegrasi yang memungkinkan perekaman spektrum dan analisis berbagai panjang gelombang. Dengan detektor PDA, sistem tidak hanya memungkinkan analisis kromatografi standar, tetapi juga evaluasi spektral dari zat yang terdeteksi. Detektor Fluoresensi Shimadzu RF-20AXS Sistem ini dilengkapi dengan detektor fluoresensi RF-20AXS yang sangat sensitif, yang secara signifikan meningkatkan kemampuan analitis dari seluruh set. Parameter RF-20AXS • Sumber cahaya: lampu xenon • Lampu merkuri tekanan rendah tambahan untuk mengontrol akurasi panjang gelombang • Rentang panjang gelombang: 200–750 nm • Lebar pita spektral: 20 nm • Akurasi panjang gelombang: ±2 nm • Reproduksibilitas panjang gelombang: ±0,2 nm • S/N untuk puncak Raman air: ≥2000 • Sel aliran standar: 12 µL • Tekanan sel maksimum: 2 MPa • Termostat sel • Kemampuan untuk memantau dua pasang panjang gelombang eksitasi/emisi secara bersamaan Lodpfxszv Salj Ac Hehk Kombinasi PDA + detektor fluoresensi FLD memberikan kemampuan analitis yang sangat luas dan memungkinkan penentuan baik senyawa standar yang menyerap UV/Vis, maupun zat yang memerlukan deteksi fluoresensi yang sangat sensitif. Data Perangkat Shimadzu LC-2050C 3D • NO. KAT.: 228-65822-58 • Tahun produksi: 2023 Shimadzu RF-20AXS • NO. KAT.: 228-65305-58 • Tahun produksi: 2023 Aplikasi Sistem ini dirancang untuk: • Laboratorium farmasi • Kontrol kualitas • Laboratorium kimia • Industri makanan • Penelitian lingkungan • Laboratorium penelitian dan pengembangan • Analisis HPLC yang memerlukan deteksi PDA • Analisis jejak yang menggunakan deteksi fluoresensi Kondisi Tahun produksi: 2023 Perangkat belum digunakan. Kondisi visual sangat baik – sesuai dengan foto. Penjualan set lengkap: Shimadzu LC-2050C 3D + RF-20AXS + komputer Dell + UPS + peralatan seperti yang terlihat di foto. Kemungkinan untuk mengirim foto tambahan, nomor seri, dan informasi tentang perangkat.

Kondisi: bekas, Tahun pembuatan: 1989, nomor mesin/kendaraan: 19216, 22614 Ljdpet Etiysfx Ac Hjhk

Kondisi: bekas, Tahun pembuatan: 2023, Area kerja pemotongan: 5600x5600 mm 1x Gabbiani G 3 130 (56) – Gergaji panel pembagi berkinerja tinggi 1x Printer label kompak 1x Konsol pengoperasian "eye-M EVO" 1x Perangkat lunak antarmuka manusia-mesin (HMI) MAESTRO ACTIVE 1x Maestro pattern Ljdpfoxlvktox Ac Hjhk 1x Meja bantalan udara tetap berkinerja tinggi dengan rel pemandu, 2500x600 mm, dengan rol masuk 3x Meja bantalan udara bergerak berkinerja tinggi – 2500x600 mm, dengan rol masuk 1x Perata samping otomatis ganda dengan penggerak motor 1x Sakelar kaki untuk START/STOP siklus kerja 1x Perangkat pembuatan alur dengan pengaturan ketinggian pisau gergaji melalui kontrol 1x Perangkat "Autosetting" pada gerobak gergaji untuk panjang/lebar potongan 1x Motor gergaji utama 25 HP (18 kW) 50 Hz dengan starter bintang-segitiga 1x Pengencangan cepat mata gergaji dengan flange mekanik “AKE” 1x Penutup collet selektif (bidang 0–1600 mm) 3x Collet ganda tambahan 4x Collet tambahan dengan satu jari 1x Printer label kantor kompak 1x Cut editor 1x Maestro optiwise – Advanced – 1 lisensi 1x Maestro connect: Kontrak layanan selama 1 tahun (termasuk kit Gateway "plug&play") 1x Soket 1x BAHASA MESIN: Jerman 1x BAHASA PC: Jerman 1x SPEC01 Eksekusi khusus 01 1x Persyaratan keamanan Eropa (tanda CE), termasuk 123 jam commissioning di lokasi (di dalam Jerman) (jam kerja harian 8 jam sudah termasuk waktu kedatangan dan kepulangan). Termasuk 1 hari pelatihan online MAESTRO OPTIWISE PRO (jika dibutuhkan) Termasuk MAESTRO CONNECT 1 tahun Termasuk impor MAESTRO PATTERN (senilai €255 gratis)!!! GARANSI PABRIKAN PENUH DI TAHUN PERTAMA!!! Lokasi stok:

Kondisi: bekas, High-Performance Baler MACFAB - BEMA Type 650A Hydraulic press for packaging waste, recyclable renewable raw materials, and secondary raw materials Serial No. MF J0162 Year of manufacture: 2021 Pressing force: 50 tons Press plate stroke: approx. 1000 mm Cycle time per stroke: approx. 40 sec. Press chamber base area: 1500 x 1100 mm Press chamber height: 1650 mm Filling opening: 1500 x 870 mm Filling height: approx. 1250 mm Bale size: 1500 x 1100 mm Bale height: max. 1100 mm Hydraulic operating pressure: 200 bar Lhsdpfx Acsvq Rtkj Hok Motor power: 5.5 kW Power supply: 400 Volt, 50 Hz, 12 Amp. - Equipped with two hydraulic cylinders - Door locking via threaded spindle with handwheel - Press operation possible only when press chamber door is closed - Two-hand control for hydraulic ejection of finished bale - Clearances for manual strapping - Produces standard industrial bales of 1500 x 1100 x 1100 mm - The highly compacted bale is automatically tilted onto a pallet - Only 62 operating hours Installation dimensions (L x W x H): 2120 x 1350 x 3220 mm Transport height with retracted hydraulic cylinders: approx. 260 cm Weight: 1.8 tons The machine is in excellent, as-new condition. The new price for this press from BEMA is EUR 22,200 net. BEMA also purchases packaging waste that you bale with this press.

Kondisi: baru, Capacity Ø 30 - 160 mm Saw body 30-degree linear slide Saw motor 15 kW Hydraulic motor 3 kW Saw feed motor 1.5 kW Siemens Saw speed 30-120 rpm Saw blade diameter Ø480 x 2.25 x 2.7 x 50 mm Control Siemens Hydraulics Rexroth valve Coolant Pulverized cutting oil Machine weight approx. 5550 kg Space requirement approx. 3200 x 7600 mm For price information, please use the contact form. Lsdpfx Asy Apluoc Hohk GERD WOLFF GLS-160 High Performance Circular Saw (Fully Automated) Discover the new generation of high-performance metal circular saws that combine precision and efficiency in perfect harmony with German quality. Our high-performance metal circular saw machines set industry standards in metalworking thanks to their innovative technology, enabling you to process steel of all types precisely and effortlessly. From 10 millimeters up to an impressive 250 millimeters in steel diameter, our machines cut with utmost accuracy within seconds. The core features of these machines are their automatic functions, paired with an advanced ball screw spindle and an automatic material feed system. This combination ensures not only maximum precision, but also impressive speed. A Siemens motor and Siemens PLC touchscreen ensure reliable performance and easy operation. Additionally, our high-performance metal circular saw machines feature a special system for convenient and quick saw blade changes. The hydraulic material clamping system ensures reliable securing of the workpiece during cutting operations. Furthermore, a programmable mist lubrication system is integrated, providing optimal lubrication and cooling of the saw blade, thereby extending tool life. Thanks to our servo and drive technology, you have full control over your manufacturing processes, enabling you to optimize production and achieve the highest quality standards. Opt for our high-performance metal circular saw machines and experience the future of metalworking—precise, efficient, and reliable.

Kondisi: bekas, Finnigan Mat GCQ Gas Chromatograph | Liquid Sampler CTC-A200S Functionality cannot be fully tested. Due to its age, the device is being sold as a source for spare parts. You are welcome to arrange an appointment for inspection. Upon request, we can organize cost-effective shipping for you! You will receive a proper invoice. For international customers, a net invoice can be issued, provided you have a valid VAT ID number. Subject to prior sale. Lodpfxevwbxwo Ac Hshk Visit our shop and check out our other listings as well. The company names and trademarks mentioned are the property of their respective owners and are used solely for identification and description of the products. Deviations from technical data and errors in the item description may occur and are subject to change.

Kondisi: bekas, Tahun pembuatan: 1995, nomor mesin/kendaraan: 953003, 25072 Technical Data: - Drilling capacity in steel ST 60: 40 mm - Drill spindle taper: MT 4 - Drill spindle stroke: 150 mm Lodov Uy Npspfx Ac Hehk - Spindle speeds: stepless (rpm) - Throat depth: 350 mm - Max. distance spindle – table: 580 mm - Table with 2 T-slots: 600 x 450 mm - Height adjustable via rack and pinion with hand crank - Table tiltable left and right - Drive: 400 V / 3 kW - Required space (approx.): W 700 x H 1950 x D 950 mm - Weight (approx.): 650 kg - Including: - Machine vice - Quick-action drill chuck 1-13 mm - Lighting

Kondisi: bekas, TRUMPF TruDisk 4002 (4 C) high-power solid-state disk laser, up to 4 kW Model: TruDisk 4002 (4 C) The TruDisk 4002 is a powerful, energy-efficient, and modular laser solution—ideal for industrial manufacturing environments with high demands for quality, precision, and automation. Its combination of high output, excellent beam quality, and smart factory features makes it a particularly attractive choice for modern production lines. Machine Type: TruDisk 4002 (4C) Manufacturer: TRUMPF Laser GmbH + Co. KG Year of Manufacture: May 2012 Drawing Number: 20-10-02-A3* No further in-house inspection was carried out. Operating hours could not be accessed. The laser operated flawlessly until decommissioning. Technical specifications: - Output & Wavelength: 80–4000 W at 1030 nm - Beam quality (BPP): typically 2 mm·mrad (up to 25 mm·mrad, depending on configuration) - Modular & compact: footprint < 1 m², modular design simplifies maintenance/service - Efficient energy & cooling systems: - Energy-saving modes, active power factor correction, pulse function for reduced consumption - Flexible cooling: integrated heat exchanger (5–28°C), optionally with compressor (inlet temperature up to 38°C) - Reflection-resistant: special resonator design also suitable for highly reflective metals - Industry 4.0-enabled: comprehensive sensors & data interfaces for condition monitoring, OPC UA, predictive maintenance Applications: - Scanner and hybrid welding (e.g. automotive bodywork, shipbuilding) - High-speed cutting, including reflective metals - Flame cutting & surface processing - Cladding, hardening, deep penetration welding with high precision requirements Technical Data: - Supply voltage: 380 V (-10%) to 460 V (+10%), 3AC + PE - Frequency: 50–60 Hz - Power consumption: 23 kW / 25 kVA - Rated current: 34 A at 400 V - Degree of protection: IP 54 - Short-circuit withstand capacity: Icn / SCCR 50 kA - Weight: 850 kg Ljdpfx Aezii Nqsc Hjhk Condition: used Scope of delivery: (see picture) (Subject to changes and errors in the technical data; information is without guarantee!) For further questions, please contact us by phone.

Kondisi: bekas, Trumpf TRUMPF TruDisk 6602 (4 C) High-Power Disk Laser with up to 6.6 kW Type: TruDisk 6602 (4 C) The TRUMPF TruDisk 6602 (4C) is a high-performance disk laser offering continuous output of approximately 6.6 kW – perfectly suited for welding, cutting, and surface processing of metals like steel, aluminum, copper, and more. Machine Type: TruDisk 6602 (4 C) Manufacturer: TRUMPF Laser GmbH + Co. KG Year of manufacture: November 2012 Drawing number: 20-10-02-A5 No additional inspection was conducted in-house. Operating hours could not be read out. The laser was operating flawlessly up until decommission. Key Technical Features: - Power output: Continuously adjustable from 80 W up to 6600 W, max. 6.6 kW for machine tools - Beam quality: < 2 mm·mrad for excellent focus control - Wavelength: 1030 nm (infrared), adaptable to green wavelength in special models - Beam sharing: Up to 4 laser outputs (4C), enabling the simultaneous supply of multiple processing cells - Cooling system: Integrated heat exchanger (up to 28 °C inlet temperature), optional compressor cooling (up to 38 °C) - Modular and service-friendly: Compact design (< 1 m² footprint), modular components for rapid servicing Benefits & Applications: - Maximum process stability: Real-time power regulation ensures reproducible results - Reflection resistance: Patented resonator design enables welding of reflective metals such as copper and aluminum - Industry 4.0 ready: Onboard sensor monitoring system, OPC-UA interface for condition monitoring & predictive maintenance - Energy efficiency: Up to 50% less power consumption thanks to intelligent pulse control and energy-saving modes - Versatility: Application areas range from welding (including BrightLine for virtually spatter-free results) and cutting, to hardening, cast processing, additive manufacturing, laser wire cladding, and more. Typical Use Cases: Ljdpfx Aezii D Ijc Hjhk Ideally suited for industrial high-power laser applications: Application | Features -----|----- Production of automotive body parts | Deep penetration welding with high repeatability Copper welding | Especially suited with green wavelength (>95% spatter reduction) Remote hybrid welding | Fast processing of large areas with robust beam quality Additive manufacturing & hardening | Suitable due to beam quality & compact design Main Technical Data: Property | Value -----|----- Laser power | up to 6,600 W (6.6 kW), continuously variable Beam quality |

Kondisi: baik (bekas), Tahun pembuatan: 1998, nomor mesin/kendaraan: 3815-130-3235, 25380 Lhjdsxr Ayhopfx Ac Hok

Tahun pembuatan: 1979, Kondisi: bekas, Centrifugal High-Performance Kieselguhr Filter with Buffer Tank, KG-Dosing Vessel, and Peristaltic Pump. Machine (Additional): Kieselguhr Filter Capacity approx.: 110 hl/h Lhodpfxevcqmbe Ac Hok Tank Volume: 1,550 l Operating Pressure: 9 bar Operating Temperature: 100°C Operation / Control: Control cabinet with push buttons Material: Stainless steel Equipment: Kieselguhr dosing vessel, 14.26 hl; peristaltic pump Peripherals: Buffer tank, vessel.

Kondisi: bekas, en-001 Lhjdozix U Aspfx Ac Hjk