Beli Kolom Ganda Presse bekas (13.849)

Tahun pembuatan: 1978, Kondisi: bekas, Press force 2000 / 1000* t Column distance 2650 mm Stroke 500 mm Side opening between columns 500 x 1000 mm Plunger diameter 710 mm Number of pressure cylinders 2 Distance table / ram 1000 mm Operating pressure 130 / 230 bar Overall height 800 mm Table length 2500 mm Table width 1600 mm Table height 250 mm Return force 500 kN Number of T-slots 8 Spindle speed 1500 rpm Rapid traverse speed 120 - 140 mm/min Closing speed max. 120 - 140 mm/sec Ram return via small separate cylinder 100 - 110 mm/sec Hydraulic ram locking Noise suppressor 300 t Cushion force 200 t Cushion stroke 250 mm Cushion speed 100 mm/sec Frequency 50 Hz Voltage 380 V Oil volume 2000 l Total power requirement 93 kW Machine weight approx. 100 t Space requirement approx. 5000 x 2500 x 7200 mm Bwjdpod Ih Ncofx Am Iol Transport dimensions approx. 6500 x 3750 x 2190 mm *Conversion: 1991 installation of a drawing cushion, new nameplate due to pressure reduction – PO 1000: Machine is currently limited to 1000 tonnes (Reason: tools were only rated for 1000 tonnes) The press ran flawlessly until it was dismantled and replaced by a press line. Important for accident prevention regulations (UVV): The press is equipped with a hydraulic ram locking system!

Kondisi: bekas, Pressing force 200 t Bodpfx Amsg S R Twj Ijwl Distance between uprights 1600 mm Maximum ram stroke 600 mm Installation height 900 mm Table width 1600 mm Table depth 1300 mm Table height 1060 mm Ram surface area 1600 x 1300 mm T-slots DIN 650 / 22H12 Rapid traverse 400 mm/s Return speed 325 mm/s Pressing speed 42 mm/s at 40% Pressing speed 20 mm/s at 100% Drawing cushion force 800 kN Drawing cushion stroke 150 mm Drawing cushion speed up 68 / down 225 mm/s Retrofit year 2001

Tahun pembuatan: 1984, Kondisi: bekas, Pressure: 100 t Upright gap: 1000 mm Stroke: 150 mm Table area: 1000 x 700 mm Distance table/ram: 500 mm Drawing cushion stroke: 180 mm Ram area: 1000 x 700 mm Ram boreholes x depth: 50 mm Strokes per minute: 85 spm Pin hole (depth x diameter): 85 x 50 mm T-slot: 22 DIN 650 Shape: diagonal Number of T-slots: 2 Sheet width: 400 mm Sheet length: 1000 mm Space requirement (approx.): 3.0 x 3.0 x 3.0 m Machine weight (approx.): 8 t Total power requirement: 30.2 kW - Fine stroke adjustment - Stroke shock absorption - Oil extraction - 2 cylinders Bwodpfx Aefn Apzjm Ijl - Roller feed by Dreher, type WAV, control PMS3000 by Dreher - Soundproof cabin - Machine was overhauled in 2001 and equipped with new control SIEMENS SIMATIC OP17

Tahun pembuatan: 1981, Kondisi: bekas, Translation: Bwsdpfob U Hw Tsx Am Iol Pressing force: 40 t Upright spacing: 600 mm Stroke: 160 mm Table size: 560 x 400 mm Installation height: 360 mm Ram bore: 40 H 7 DIN 810 mm Oil capacity: 500 l Return speed: 200 mm/sec Hydraulic cushion pressure/stroke: 60 Ejector force: 25 t Total power requirement: 15 kW Space requirement approx.: 1.44 x 0.95 x 2.54 m Pressing speed: 27 mm/sec Return speed: 200 mm/min With hydraulic draw cushion, speeds: Rapid advance speed: 240 mm/s, steplessly adjustable

Tahun pembuatan: 1980, Kondisi: bekas, Press capacity 100 t Frame gap - mm Stroke 350 mm Table dimensions 1150 x 700 mm Bodpfx Aodlxctsm Iewl Total power requirement 11 kW Machine weight approx. t Space requirements approx. m with ram shock absorber and drawing cushion Machine without control cabinet

Kondisi: baik (bekas), Tahun pembuatan: 1997, Produsen: Line Tipe: Seramill 240 Kontrol: NUM 750 Perjalanan sumbu X: 6000 mm Perjalanan sumbu Y: 2500 mm Bedpfxeyf A H No Am Iowl Perjalanan sumbu Z: 950 mm Jarak kolom: 2400 mm Meja: 6000 x 2100 mm Kepala frais otomatis: 2,5° Kecepatan spindle: 3200 rpm Kecepatan pengumpanan: 10 m/menit Berat mesin: sekitar 35 ton

Kondisi: bekas, Tahun pembuatan: 1994, Merek: HYDRAP, Tipe: HPDZ b 1600, Tahun pembuatan: 1994, No. seri: 6784, Tekanan maks.: 1.600 t (ram 1.000 t + penahan pelat 600 t, dapat dikombinasikan), meja geser, 3.600 x 2.200 mm, permukaan penjepitan ram 3.620 x 2.200 mm, langkah ram 1.500 mm, tekanan bantal tarik meja 36 - 360 t, langkah bantal tarik meja 450 mm, kontrol mesin press, panel kontrol, dapat diputar, robot linier Strothmann +++ Perhatian: Mesin merupakan bagian dari lelang online! +++ Bwsdpfjx Ry Tfsx Am Iol

Kondisi: bekas, Tahun pembuatan: 1965, Merek: MÜLLER, Tipe: BZE1600-35.2.1, Tahun: 1965, No. Seri: 902, Tekanan maks.: 1.600 t (slider 1.000 t + penahan plat 600 t; dapat dikaitkan), meja geser, 3.500 x 2.750 mm, area penjepitan slider 3.500 x 2.750 mm, langkah slider 1.400 mm, penyesuaian slider 350 mm, tekanan pad tarik meja 36 - 360 t, langkah pad tarik meja 250 mm, penjepitan alat hidrolik pada slider, kontrol press, pabrikan Siemens, tipe Simatic S7, panel operator, tipe Simatic OP37 Bodpfx Aox Rzkxem Ijwl +++ Perhatian: Mesin adalah bagian dari lelang online! +++

Kondisi: baik (bekas), jarak pergerakan sumbu X: 1.940 mm, jarak lintasan sumbu Y: 1.200 mm, jarak gerak sumbu Z: 700 mm, kecepatan spindel (min.): 100 rpm, kecepatan spindel (maks.): 15.000 rpm, beban meja: 3.500 kg, Mesin dalam kondisi kerja yang baik. Suku cadang yang ditunjukkan dengan tangan tidak termasuk. Bwjdeylxg Eepfx Am Isl

Kondisi: bekas, Tahun pembuatan: 2011, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 4.000 mm, jarak lintasan sumbu Y: 2.700 mm, jarak gerak sumbu Z: 1.200 mm, panjang total: 13.700 mm, lebar total: 10.000 mm, tinggi total: 5.300 mm, KEKEISEN PFW-T 4000/12 portal milling machine in heavy, rigid design for machining large and heavy workpieces. Travel distances of 4,000 x 2,700 x 1,200 mm and a large worktable of approximately 4,000 x 1,800 mm with a 10,000 kg table load capacity enable the machining of large-volume components. The machine is equipped with a universal milling head featuring 2 swivel axes and 5 settable positions (manual or optionally NC-controlled). Hirth coupling ensures precise angular adjustment. Powerful main spindle drive with approx. 30 kW (up to 37 kW in some cases), speed range of 20 – 2,000 rpm, optionally up to 4,000/7,000 rpm and a maximum torque of approx. 1,787 Nm – ideal for heavy-duty cutting operations. Bwsdpfx Amoy Ncgfo Ijl Additional features include a 60-position tool changer (KWE60), chip conveyor, KNOLL filtration system, Hydac cooling units, and central lubrication. Feed rate up to 4 m/min, rapid traverse up to 18 m/min, and feed forces of approx. 30,000 N per axis emphasize the robust design of this machine.

Kondisi: baik (bekas), Tahun pembuatan: 1999, jarak pergerakan sumbu X: 3.000 mm, jarak lintasan sumbu Y: 2.500 mm, jarak gerak sumbu Z: 1.150 mm, Kontrol: Siemens 840 D Powerline Pemegang alat: HSK-A63 Kecepatan maksimum: 16.000 rpm Perjalanan X: 3000 mm Perjalanan Y: 2500 mm Perjalanan Z: 1150 mm Sumbu A: +/- 100 mm Sumbu C: +/- 181,5 mm Ukuran meja: 3000 mm x 2500 mm Opsi: Udara tiup luar Kinematika: Kepala garpu Bwjdpfxjy Iwr Te Am Isl

Kondisi: bekas, Tahun pembuatan: 1998, de-hu-001 Bodpfoy E Tvpsx Am Iowl

Kondisi: bekas, Tahun pembuatan: 1979, Press force: 60 t Column gap: 650 mm Stroke: 220 mm Distance between table and ram, large stroke at top, adjustment at top: 410 mm Bsdpfx Aovuk Nmem Iowl Table surface: 600 x 525 mm Die cushion force in table: 5 t Die cushion stroke in table: 80 mm Table height above floor: 900 mm Lateral column clearance: 200 mm Ram surface: 560 x 490 mm Space requirement (W x D x H): 1.9 x 1.3 x 2.7 m Approved for manual loading operations according to German accident prevention regulations (UVV) with oil-hydraulic drive, light curtain (Sick FGS 600), hydraulic die cushion in table, two-hand and foot control No foundation pit required Can be offered as-is, with or without commissioning

Kondisi: bekas, Tahun pembuatan: 1980, Pressing force: 50 t Column spacing: 1,750 mm Stroke: 500 mm Distance table/ram, max. stroke up, adjustment up: 800 mm Table surface: 1,700 x 750 mm Table height above floor: 800 mm Lateral column opening: 650 x 750 mm Ram surface: 1,700 x 750 mm Drive power: 11.0 kW Weight: 11.0 t Bsdpevuk Ngsfx Am Iswl Space requirements (LxWxH): 2.1 x 1.15 x 3.4 m Approved for manual loading/unloading in accordance with German accident prevention regulations (UVV) With electro-hydraulic drive, pressure/time and position dependent control No foundation pit required Can be offered either as-is (not commissioned) or alternatively with new Siemens S7-1500 F control.

Kondisi: bekas, Tahun pembuatan: 1983, druk160t10 Bwedpfx Aovuk E Uem Iol

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2010, Fungsionalitas: berfungsi sepenuhnya, gantry-2010 Bwodey Dvwyspfx Am Isl

Kondisi: bekas, Tahun pembuatan: 1979, de-to-hu-it-lt-001 Bsdsvuk I Aepfx Am Iswl

Kondisi: bekas, Tahun pembuatan: 2007, Table diameter: 2500 mm Max. swing diameter over bed: 2700 mm Bsdpfx Amey Dvlwe Iswl Turning height: 2500 mm Control: Siemens 840D CNC Max. workpiece weight: 30 t Workpiece diameter: 2500 mm Crossrail travel (increments of 100 mm): 1200 mm Ram stroke: 1500 mm Ram cross-section: 250 x 250 mm Travel speed: 8 m/min Max. vertical feed: 6000 mm/min Max. cross feed: 8000 mm/min Table speed: 180 rpm Tool change time: 1 min Cutting speed: 140 m/min Cutting depth: 14 mm Main drive power: 100 kW Machine weight: approx. 47 t Footprint: approx. 12.5 x 8.0 x 6.7 m Equipment/Accessories: - Crossrail adjustable in 100 mm increments incl. locking mechanism - 2 rams with cross-section 250 x 250 mm; stroke 1500 mm - Both rams traversable over center (each 100 mm, i.e. both ballscrews offset from each other with collision protection) - ZF gearbox for main drive AC 100 kW / S1 Siemens, speed range 0–180 rpm - 2 tool changers with 16 stations each - Max. tool weight 50 kg; max. 800 kg in tool changer - 2 Renishaw touch probes with zero-point detection - Renishaw probe for workpiece measurement

Kondisi: bekas, Tahun pembuatan: 2015, Fungsionalitas: berfungsi sepenuhnya, jenis arus masuk: tiga fasa, Kami menawarkan mesin milling portal bekas HAAS GR-510 ini, tahun pembuatan 2015. Model: GR-510 Tanggal produksi: 02/2015 Tegangan: 354-488 V Fase: 3 Frekuensi: 50/60 Hz Arus beban penuh: 20 A Arus beban maksimum: 35 A Kapasitas pemutus hubung singkat: 10.000 A Diagram kelistrikan: 96/0284 Arus hubung singkat: 5.000 A Klasifikasi perlindungan busur listrik: Model 208-240VAC HRC-1; Model 360-480VAC HRC-2 Nomor suku cadang (P/N): 29-10048 Bsdpoyxx Azsfx Am Ijwl Jika Anda memiliki pertanyaan atau membutuhkan informasi lebih lanjut, silakan kirim pesan atau hubungi kami.

Kondisi: baru, Tahun pembuatan: 2026, gaya penekanan: 30 t, DURENDUS 30 T Heated Press – Double-Column Press – 700 × 500 mm Heated Plates, Sliding Table The machine shown here was built and delivered to a customer as a custom order. We can manufacture this machine for you at short notice – tailored to your individual requirements, if desired. This is a hydraulic heated press featuring electrically heated plates and a manually operated sliding table for pressing, laminating, and forming processes requiring temperature influence. Bwjdpfx Asy H Dtzjm Ijl Base price: €23,500 net Options (on request): The options listed below are based on realized customer projects and enable precise adaptation of the machine to your specific application. The base machine is supplied as a functional standard version – in practical use, it is typically enhanced with additional features and configured to project requirements. ==== Technical Data & Information: ==== General Information * Design: Double-column press * Pressing force: 30 t (adjustable) * Total weight: approx. 3,200 kg * Overall dimensions (W × D × H): 2,000 × 1,500 × 2,850 mm ==== Working Area * Table size: 700 × 500 mm * Heated plates: 700 × 500 × 65 mm * Maximum installation height: 800 mm * Table traverse: 500 mm (manual) ==== Table & Ram * Ram stroke: 600 mm * Cylinder diameter: Ø 130 mm * Piston rod: Ø 80 mm * 8-way slide guide for parallelism ==== Speeds * Working speed: 9 mm/s * Return speed: 25 mm/s ==== Hydraulics & Drive * Working pressure: max. 240 bar * Pump capacity: 12 l/min * Motor power: 3 kW * Hydraulic tank: 80 l * Pressure accuracy: ±5 bar * Hydraulic system with air cooling ==== Controls & Operation * SIEMENS S7-1200 control system with 7" touchscreen panel * Programmable parameters (stroke, pressure, time, cycles) * Two-hand operation * Electrical connection: 400 V / 50 Hz * Total connected load: approx. 25 kW (incl. heating) ==== Equipment * Electrically heated press plates up to 200 °C * Temperature monitoring with sensors * Passive pressure-holding function up to 60 minutes * Hydraulic and electronic overload protection * Safety limit switches * CE certification * Two-coat finish in RAL color ===== Hot pressing, laminating, plastics processing, rubber and composite material processing, forming Heated press, hydraulic press, double-column press, thermo press, laminating press, industrial press Are you looking for a hydraulic press tailored to your specific application? Contact us for a customized quotation. Our hydraulic presses are manufactured according to German Machinery Directives and European Machinery Directives (Directive 2006/42/EC), as well as EC standards and EU safety regulations. In addition, our presses exceed both Canadian and European safety standards, as they fully comply with the Brazilian national safety directive NR 12, which builds upon these standards. Our core strength lies in custom machinery manufacturing and press automation. We offer bespoke hydraulic presses at surprisingly competitive prices. The hydraulics of our presses are predominantly equipped with components from leading European manufacturers.

Tahun pembuatan: 1998, Kondisi: siap digunakan (bekas), machinery-press-001 Bwjdpfxsy Hk S Rj Am Iol

Kondisi: bekas, Tahun pembuatan: 1987, b07ccce7cbedcde7 Bwsdsyz Db Uepfx Am Isl

Kondisi: bekas, Tahun pembuatan: 1995, Faceplate diameter: 4000 mm Swing diameter: 4300 mm Turning height: 1750 mm Cross slide travel: 1000 mm Table load capacity: 18 t Speed range: 1-92 rpm Control: Siemens Type 840 D Number of tool posts: 2 Ram dimensions: 250x250 mm Feed rate: 1-4000 mm/min Main drive motor: 55 kW Total power requirement: 85 kVA Machine weight approx.: 64 t Space requirements approx.: 8 x 5.8 x 8 m The machine was overhauled in 2007 Bodpfoyquyfex Am Iowl The machine is currently set up for ring machining, but can be converted back for machining tall parts. Additional Information: Chip conveyor The technical data are provided by the manufacturer or the operator and are therefore non-binding for us. Interim sale reserved; exclusively our terms and conditions of business and sale apply. About us: - Over 400 own machines in stock - More than 15,000 m² warehouse area, crane capacity 70 t - More than 10,000 accessories for your workshop If you would like to sell machines, production lines or your business, please do not hesitate to contact us. Further offers can be found on our website. Inspections by arrangement are possible. We look forward to your visit. Your Markus Hirsch Team

Kondisi: baik (bekas), Tahun pembuatan: 2002, Fungsionalitas: berfungsi sepenuhnya, Pengoperasian pertama: 2002 Kontrol: Heidenhain iTNC530 Jam mesin: menyusul Bwsdpfx Amjyzz R Hj Ijl Sumbu X: sekitar 6.000 mm Sumbu Y: sekitar 3.500 mm Sumbu Z: sekitar 1.100 mm Sumbu A: Sumbu C: Kepala frais 2-sumbu Kecepatan spindle: maks. 14.000 rpm Perlengkapan tambahan - Penutup samping ganda Kondisi mesin Berfungsi penuh, kondisi sangat baik. Mesin masih terpasang daya dan siap pakai segera.

Kondisi: bekas, de-hu-01 Bwodpfxsyuqidj Am Iol