Beli Laue Cleaning Technology Gmbh Wastafel Sikat Biologis bekas (83.639)

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2023, jam operasional: 35 h, Fungsionalitas: berfungsi sepenuhnya, lebar total: 87 mm, panjang total: 120 mm, berat muatan maksimum: 200 kg, kapasitas pemanasan: 7,2 kW (9,79 hp), kapasitas tangki: 400 l, masa garansi: 24 bulan, jenis arus masuk: tiga fasa, tinggi dalam: 600 mm, panjang dalam: 800 mm, lebar dalam: 500 mm, berat keseluruhan: 150 kg, tegangan masuk: 400 V, frekuensi input: 50 Hz, berat benda kerja (maks.): 200 kg, LCT NW 180 BSS demonstration tank Dual frequency 27/80 kHz Stainless steel control cabinet with ventilation Hinged cover Tank fully insulated Stainless steel wash basket with four crane lugs and a lifting rod Four adjustable feet for uneven floors Bottom drainage via valve with inclined tank floor for complete emptying Bottom grate Bottom and 2x side-mounted transducers with a total output of 3000 watts Iisdpfsq Rd R Dox Afija Time switch with timer and program control Connected load: 10.2 kW

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2025, The LCT bio.x C100 brush washing table is the proven classic with a new design and optimized device technology. It impresses with its exceptional stability and load-bearing capacity. The spacious work surface allows for barrier-free and comfortable operation. - Robust construction - Especially low maintenance - High load capacity - Energy-saving mode for idle periods such as nighttime or weekends - A flexible articulated hose enables easy rinsing of parts - Optimal cleaning performance by heating the cleaning fluid to 41 °C Workpieces are rinsed via a nozzle. The flexible articulated hose allows the nozzle to be fixed in the desired position. The cleaning brush assists in cleaning heavily soiled parts. The large cleaning surface allows for efficient work. The high load capacity of the washing table is ensured by its sturdy device construction. The unit is made of plastic, making it very stable and corrosion-free. Easy transport with pallet trucks. Ijdpjh S Undofx Afisia Multi-stage filtration system consisting of a coarse sieve, fine sieve, and magnet. Additionally, a washable filter bag (fineness: 100 μm) retains even the finest contaminants before they enter the bath. A functional control unit with a soft-touch control panel provides about 50% energy savings when the energy-saving mode is selected. All electronic components are combined in a compact technical unit. Our LCT bio.x C100 can be operated with the following label-free cleaning agents: LCT Bio Liquid LCT Bio Liquid Spezial LCT Bio Liquid Power LCT Coconut Cleaner LCT Coconut Cleaner Alu LCT Coconut Cleaner Low-Foam

Kondisi: baru, Tahun pembuatan: 2025, de-2024-06-13-01 Iiodpfxjhcpbbj Afiea

Kondisi: baru, Tahun pembuatan: 2025, d-001 Ijdpfx Aeffqi Uofioia

Kondisi: baru, Tahun pembuatan: 2025, de-to-hu-it-lt-lv-nb-nl-pl Isdpfxog Hgcwe Afioia

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, Fully Automatic Bagging System – Completely Dismantled and Ready for Collection For sale is a fully automatic bagging system, suitable for a wide range of bulk materials such as flour, pellets, and granulates. The system impresses with its high level of automation and robust, industrial-grade construction. Features and Components: - Pneumatic bagging device - Fully automatic sewing machine for sealing bags - Rollers for flattening filled bags - Roller conveyors for internal transport - Robotic arm for automatic palletizing of bags - Automatic pallet magazine - All electrical cables and control cabinets professionally dismantled The entire system has already been dismantled, neatly palletized, and is ready for immediate collection. Comprehensive electrical documentation with schematic diagrams is available. Key Features: Ideal for industrial applications requiring high throughput and automated processes. All components are perfectly matched, enabling an efficient packaging and palletizing process. Iiodpfx Afsyw Rffjiea If you are interested or require further information, please feel free to contact us.

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2025, jam operasional: 1 h, Fungsionalitas: berfungsi sepenuhnya, Magnet Overband Tipe UB 600 Tegangan operasi: 3x400 V Isdpfx Asxy Hl Defieia Frekuensi: 50 Hz Arus operasi nominal: 5 A Kecepatan operasi: 30 - 90 rpm Tekanan suara maksimum: 50 dB Berat mesin: 750 kg Lokasi: Austria Tersedia segera

Tahun pembuatan: 2020, Kondisi: baru, Fully automatic system for filling pre-manufactured plastic casting packages (unit dose) for various liquid media, such as CBD oil, eye solution, buffer solution, etc. Packaging models – see attachment – are manufactured by us! Performance: Ijdofx N Uiopfx Afisia 5,000 liquid packaging units per hour, depending on container shape and the viscosity of the product. Dosing range: 1 – 10 ml (depending on packaging) Dosing range adjustment is performed when the machine is at a standstill, via the dosing pump control unit. The entire system is designed in accordance with hygienic design standards and is GMP-compliant. For further inquiries, please contact us by email or by phone at the number provided.

Tahun pembuatan: 2020, Kondisi: baru, A fully automated film rewinding machine according to GMP guidelines. Film Rewinding Machine Type FUM-900 CP This film rewinding machine is designed to rewind film rolls that have run off-track or have not been wound with the correct winding tension during production in large-scale facilities, thus preparing them for further processing. The machine is specifically engineered in accordance with pharmaceutical standards and for the processing of PVC film. Advantage of our machine: Thanks to two separate drives, we can ensure winding both to the right and to the left. Technical Details: Width: 1,600 mm Depth: 850 mm Height: 1,100 mm Materials: Product-contacting surfaces: 1.4301 / acrylic Performance: up to 120 m/s Speed: infinitely adjustable Film roll diameter: Max. 450 mm Iijdpfxefwfpbo Afisa Connection: 230 V / 50 Hz Drive: DC motor 0.25 kW

Tahun pembuatan: 2000, Kondisi: diremajakan ulang (bekas), System for filling, cooling, and sealing plastic suppository casting packages. The line was completely overhauled both mechanically and electronically in 2019 and is like new. Prior to delivery, the system is tested with suppositories supplied by CP-Citopac GmbH. Iiodpfjfc I Haox Afiea For further technical details, please refer to the data sheet.

Kondisi: baru, Tahun pembuatan: 2026, For sale: a versatile Eckert Opal Waterjet cutting system, ideal for processing stone (natural stone, marble, granite) — but also suitable for various other materials. Waterjet cutting ensures machining without thermal influence, enabling precise and clean cut edges. Especially suitable for complex contours, inlays, cut-outs, or demanding shapes in stone. 🛠 Technical Data & Features (Manufacturer Specifications) Working width: 1,000 – 6,000 mm Working length: 1,000 – 12,000 mm Cuttable material thickness (2D waterjet): 0.5 – 250 mm Cuttable material thickness (3D waterjet, optional): 0.5 – 150 mm Positioning speed: up to 25,000 mm/min Positioning accuracy: ± 0.025 mm Construction: Gantry design with fully enclosed steel profiles for maximum stability and durability. Cutting tank is statically decoupled and corrosion-protected. Control system: Modern CNC control with touch display (Corning® Gorilla® Glass) – intuitively operable for efficient operation. Cutting processes: Pure water or abrasive waterjet cutting; optional 5-axis cutting head (for 3D/bevel cuts) available. Optional additional equipment (if present / to be added): [ e.g., “Pro-X 3D cutting head”, “abrasive cutting”, “multiple cutting heads (e.g., 2-head / 4-head)”, “CAD/CAM software”, “water softening unit”, “drag chain conveyor”, “wastewater/filter system”, etc. ] Iiodpfx Ajx A Tr Njfiea 🎯 Ideally suited for Stone and natural stone processing companies, workshops for marble or natural stone design. Businesses requiring precise, heat-free cuts for contours, inlays, cut-outs, or shaped stones. Companies valuing clean cutting quality, minimal reworking, and high flexibility with materials. Projects with complex shapes, bevel cuts, or 3D machining—especially with the optional 3D cutting head.

Kondisi: baru, en Iiedpfx Ajfz A I Esfioa

Kondisi: baru, Diamond Cube – Fiber Laser Cutting System | Compact | Precise | Efficient The Diamond Cube is a space-saving, high-performance fiber laser cutting machine designed for professional metalworking. It is ideal for companies seeking to combine high cutting quality with economical production in a compact system. Technical Highlights: – Working area: 3000 × 1500 mm (standard format) – Laser power: available in various power levels depending on configuration – Material processing: steel, stainless steel, aluminum, and more – Maximum material thickness: up to approx. 40 mm (depending on power) – Positioning speed: up to 120 m/min – Precise servo drive & robust gantry construction – Front loading with pull-out table for fast part changeovers, loadable up to 1.4 t – Modern CNC control with integrated CAD/CAM software – Low maintenance requirements thanks to fiber laser technology Benefits for your production: – High cut quality and repeatable accuracy – Compact design – minimal footprint – Fast part change times and easy operation – Excellent cost-efficiency and low operating costs – Optimal for small to medium batch production as well as contract manufacturing Iisdpofz Di Asfx Afisa The Diamond Cube is the ideal solution for companies in steel construction, mechanical engineering, and metalworking looking to modernize their production with a reliable, precise, and energy-efficient laser cutting system.

Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, Perlengkapan: Penandaan CE, ekstraksi asap, penghadang cahaya keselamatan, Eckert Diamond Infinity – Fiber Laser for Precise Laser Cutting in Industrial Sheet Metal Processing Iiodpfx Aswqc R Tofisa The Diamond Infinity laser cutting system from Eckert impresses with powerful fiber laser technology, high cutting quality, and efficient material utilization – ideal for metalworking. The state-of-the-art CNC control with a large touchscreen ensures easy operation and complete control over all cutting processes. Areas of application: Mechanical engineering, steel construction, contract manufacturing Technical highlights: ✔ High-precision laser cutting, including copper & brass ✔ Energy-efficient fiber laser with optional linear drives ✔ Fully automatable loading/unloading processes available ✔ Service & support in Germany ➡ Discover the Diamond Infinity on Machineseeker now – your solution for efficient CNC sheet metal processing.

Kondisi: seperti baru (mesin pameran), Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2023, jam operasional: 300 h, Perlengkapan: Penandaan CE, Diamond Vector – Fiber Laser for Precise and Efficient Laser Cutting The Eckert Diamond Vector is a state-of-the-art fiber laser cutting system designed to meet the highest demands in industrial sheet metal processing. Featuring a powerful CNC control unit and an intelligent extraction system, it delivers precise cuts, short cycle times, and a clean working environment – making it ideal for mechanical engineering, steel fabrication, and contract manufacturing. Ijdjwqdbaspfx Afijia Highlights of the laser cutting system: ✔ High-precision laser cutting – even for copper and stainless steel ✔ Energy-efficient fiber laser for cost-effective operation ✔ Intuitive touchscreen control ✔ Robust construction & low maintenance ✔ Service and technical support provided directly in Germany ✔ Immediately available – no lead time! ➡ Inquire now on Machineseeker and take your production to the next level with the Diamond Vector fiber laser!

Kondisi: baru, The Topaz plasma cutting machine is an advanced solution ideally suited for manufacturing operations where precision, efficiency, and compact design are paramount. It provides reliability and high cut quality, making it a perfect match for the demands of modern enterprises. Key features: Ijdpfovmg N Hsx Afioia - Innovative technological solutions: Developed in collaboration with ECKERT and TEKA, the machine offers state-of-the-art features and high performance. - Exceptional quality and reliability: Manufactured in Germany using components from renowned brands, the machine guarantees outstanding precision, durability, and dependability. Its robust construction in compliance with stringent standards minimizes operational costs. - Intuitive user interface: The clear, user-friendly control system simplifies operation and boosts operator productivity. - Excellent cut quality: Equipped with plasma units from leading manufacturers such as Hypertherm and Kjellberg, the machine delivers optimum cut quality. - The TEKA filtration system: Ensures clean air – especially important in smaller workshops where space savings and air quality are crucial. When the machine is not in use, the system can serve as extraction for welding or grinding operations, eliminating the need for additional systems and reducing overall costs.

Tahun pembuatan: 2025, Kondisi: seperti baru (mesin pameran), IMMEDIATELY AVAILABLE!! Manual cleaning is performed using special gloves in the front section. Effective cleaning is ensured by a high-pressure pump and a special spray nozzle. These units allow the cleaning fluid temperature to be set up to 60°C. The pressure is adjustable from 1 to 80 bar. Technical specifications: Working area: 950 x 700 mm Internal height: 450 mm Load capacity: 70 kg, optionally up to 150 kg Spray pressure: adjustable 1–80 bar Tank volume: 75 litres / Heating power: 2 kW Standard features: • Blow-off pistol inside the cabin • Frame, feet, lid and housing made of stainless steel • Removable stainless steel plates above the tank • Upward-opening lid with 2 hand ports and gloves • Viewing window made of toughened glass • Door opening/closing system assisted by gas struts • Door monitoring via safety limit switch • Filter on the suction side of the pump (500 microns) • Foot switch for controlling the cleaning pump Iiedef A Nqqspfx Afiea • Interior lighting • Neoprene gloves, 600 mm length (chemical-resistant) • Height-adjustable feet +/- 50 mm • External mini pneumatic oil separator

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2023, Manual cleaning is carried out using specialized gloves in the front section. The effectiveness of the cleaning process is ensured by a wash pump with an adjustable pressure of 0-8 BAR and a special spray nozzle. The devices allow the cleaning fluid temperature to be set up to 60°C. Pressure is adjustable between 0-8 Bar. Technical Data: Working area: 950 x 700 mm Internal height: 450 mm Load capacity: 70 kg Spray pressure: Adjustable from 0-8 Bar Tank capacity: 75 liters / Heating power: 2 kW Standard Equipment: • Blow-off gun inside the unit • Frame, feet, lid, and housing made from stainless steel • Removable stainless steel covers above the tank • Upward opening lid with two hand ports and gloves • Hardened glass viewing window • Door opening/closing system with gas strut assistance Iodpfx Asr Hm R Tofieia • Door opening monitored by safety limit switch • Filter on the suction side of the pump (500 micron) • Foot switch for activating the cleaning pump • Interior lighting • Neoprene gloves L 600 mm (chemical resistant) • Adjustable feet +/- 50 mm • Stainless steel cartridge filter with pump (10/25/50 micron options) • External mini pneumatic oil separator

Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2026, jenis kontrol: Kontrol CNC, tingkat otomatisasi: semi-otomatis, produsen pengendali: PFEIFER technology, jenis laser: laser serat, daya laser: 6.000 W, panjang gelombang laser: 1.064 nm, Diameter pipa (maks.): 160 mm, Panjang pipa (maks.): 7.500 mm, panjang meja: 6.500 mm, jenis arus masuk: tiga fasa, jenis pendinginan: air, sambungan udara terkompresi: 13 batang, berat keseluruhan: 5.500 kg, panjang total: 14.800 mm, lebar total: 2.900 mm, tinggi total: 2.525 mm, masa garansi: 24 bulan, tahun perombakan terakhir: 2026, jangkauan kerja: 7.500 mm, Perlengkapan: Penandaan CE, dokumentasi / manual, ekstraksi asap, penghadang cahaya keselamatan, sistem pelumasan terpusat, unit pendingin, PFEIFER technology skyTUBE Pro 6500 X3 – Profile and Tube Laser Center 6500 x 15 – 160 mm with Bevel Cutting up to 50° skytube-pro-6500 X3 Profile and Tube Laser Fiber Laser Metal Cutting for rapid material changeover with up to 6kW – ideal for your production – is the smart and efficient tube laser processing solution. Laser cutting for round tubes, square tubes, rectangular tubes, open profiles, and special profiles: a laser machine ensuring maximum productivity during product changes. The challenge: fiber laser power up to 6kW for a wide range of metalworking tasks! Unmatched Laser Cutting Performance High axis speeds and acceleration, paired with a robust mechanical structure, provide excellent cutting performance and accuracy. The tube and profile laser processing machine for production – compact, simply smart. Ingenious solutions, 100% made in Saxony! Tubes and Profiles from 15 x 15 to 160 x 160 mm 3D cutting with efficient fiber laser technology The semi-automatic six-position profile and tube loading chain system permits rapid job changeovers. With the optional bundle loader, you work independently. The Bevel Cut A feature that changes everything. With our machine's ability to pivot its cutting head on an additional fifth axis—even up to 50°—a major challenge in modern profile machining has been solved. If the laser beam always meets the tube perpendicular, this leads to an elliptical cutting edge. Iijdpfx Ajyh A Nyjfiea With the ability to pivot the tube laser cutting head, together with the feed axis, truly angled cuts can now be achieved. Of course, you can be fully confident when working with the skyTUBE Laser! The skyTUBE Pro is a Class 1 laser system: there is no risk of exposure to laser emissions or reflections during operation. For all our laser machines, nothing is more important than complete safety and adherence to the highest standards and regulations. Technical Specifications: · Enclosed industrial housing, laser class 1 (or 4 if requested) · Processing range, tube cutting system / clamping system: regular tubes from 15 mm to 160 mm, rectangular tubes 15 x 15 – 110 mm · Processing area on tube: X 6500 / Y ±100 / Z 150 / A ±360° / U ±50° · Automatic material feeding up to 6 x 160 mm profiles, 3500 – 7000 mm · Automatic material unloading system for profile sections, design tailored to profile length · Drive system Z: Ball screw axis system / with PTI SVZ system · Drive system X/Y: Linear axis system / with PTI AC-SERVO system · Productive cutting speed: up to 50 m/min / 1.4G depending on material and laser combination · Software resolution: up to 2500 DPI · Repeatability: ±0.03 mm · Max. footprint dimensions (WxDxH): 11,600 mm x 2,830 mm x 2,100 mm + unloading system; depending on desired profile cut length, with the standard system featuring max. 4.5 m automatic unloading, resulting in a total length approx. 14,800 mm

Kondisi: hampir baru (bekas), Tahun pembuatan: 2021, jam operasional: 1.000 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 5800, Satellite blasting system for cleaning with nutshell granulate (our application: condenser coils). Other blasting media possible. Iijdpsvnrymofx Afija

Tahun pembuatan: 2025, Kondisi: baru, nomor mesin/kendaraan: AB2024, P class = Working area X 1250 mm x Y 1250 mm x Z 100 mm (* Price varies depending on configuration and laser power, this is a brand-new laser machine manufactured by us) skyCUBE M, P, SL – Laser Processing Center – the new M, P or SL SL class = Working area X 1250 mm x Y 2550 mm x Z 100 mm Iiedpsdvik Nsfx Afisa class, more productive with a larger working area as a laser cutting machine for your metalworking needs Laser processing made easy and highly precise – laser engraving and cutting with high speed and quality

Kondisi: baru, Tahun pembuatan: 2026, Fungsionalitas: berfungsi sepenuhnya, jangkauan kerja: 6.500 mm, jenis arus masuk: tiga fasa, lebar total: 1.629 mm, tinggi total: 2.525 mm, panjang total: 10.500 mm, panjang meja: 6.500 mm, berat keseluruhan: 5.500 kg, daya: 15 kW (20,39 hp), daya laser: 6.000 W, masa garansi: 24 bulan, Perlengkapan: penghadang cahaya keselamatan, unit pendingin, PFEIFER technology skyTUBE Pro 6500 X3 – Profile and Tube Laser Centre 6500 x 15 – 160 mm Format skytube-pro-6500×3 profile and tube fiber laser, for fast material change with up to 6kW, is the clever and efficient tube laser processing solution for your production. It enables laser cutting of round tubes, square tubes, rectangular tubes, open profiles, and special profiles—a laser machine designed for maximum productivity during production changeovers. The challenge: a 6kW fiber laser for a wide range of metal processing tasks! Unmatched laser cutting performance High axis speeds and accelerations, paired with a stable mechanical structure, ensure superior cutting performance and accuracy. The tube and profile laser processing machine for your production—compact, space-saving, simply clever! Smart solutions 100% made in Saxony! Tubes and profiles from 15 x 15 up to 160 x 160 mm 3D cutting with efficient fiber laser technology The semi-automatic 6-fold profile tube loading chain system allows for quick job changeovers. With the optional bundle loader, you work independently. Iiodporh Iw Tofx Afisa The Bevel Cut A feature that changes everything. Our machines can swivel the cutting head on an additional fifth axis up to 50°, which solves one of the greatest challenges in modern profile processing. When the laser beam always strikes the workpiece perpendicular, it results in an elliptical cut edge. With the option to tilt the tube laser cutting head, it is now possible to achieve a perfect bevel cut in combination with the feed axis. Of course, safety is paramount when operating the skyTUBE Laser! The skyTUBE Pro is a Class 1 laser system. There is no risk of exposure to laser emission or reflection during operation. For all our laser systems, absolute safety and compliance with the highest standards and regulations are fundamental. Technical Specifications: · Enclosed industrial housing, Class 1 laser (Class 4 option available) · Working area for tube cutting system / clamping system: Uniform tubes from 15 to 160 mm, rectangular tubes 15 x 15 – 110 mm · Working area on the tube X 6500, Y ±100, Z 150, A ±360°, U ±50° · Automatic material feed system: up to 6 x 160 mm profiles, lengths 3500 – 7000 mm · Automatic storage system for profile offcuts, construction tailored to profile lengths · Drive system Z-axis: ball screw axis system / with PTI SVZ system · Drive system X/Y: linear axis system / with PTI AC-SERVO system · Productive cutting speed: depending on material and laser combination, up to 50 m/min / 1.4G · Software resolution: up to 2500 DPI · Repeatability: ±0.03 mm · Max. floor space dimensions (W x D x H): 11600 mm x 2830 mm x 2100 mm + unloading system depending on profile cutting length

Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2025, jenis kontrol: Kontrol CNC, tingkat otomatisasi: otomatis, jenis laser: laser serat, daya laser: 6.000 W, panjang gelombang laser: 1.064 nm, panjang meja: 3.050 mm, lebar meja: 1.550 mm, jarak pergerakan sumbu X: 3.050 mm, jarak lintasan sumbu Y: 1.550 mm, jenis arus masuk: tiga fasa, berat keseluruhan: 6.500 kg, Perlengkapan: Penandaan CE, dokumentasi / manual, penghadang cahaya keselamatan, unit pendingin, skyCUBE XLs class – Large Format – Shuttle Table Laser Cutting The multifunctional flatbed laser center skyCUBE XLs class, manufactured by PFEIFER technology in Saxony, Germany, has been designed for your professional cutting tasks. It combines the latest in high productivity, cost-efficiency, and precision. The machine enclosure, constructed from welded and bolted steel, is engineered for industrial and commercial applications. The drive system developed by PFEIFER technology ensures precision and high repeatability. skyCUBE laser units meet all Class 1 requirements according to DIN EN 60825-1, guaranteeing maximum operational safety. The ergonomic design with a pull-out shuttle table facilitates easy loading of the machine. Drawers in the lower section are provided for collecting cutting residues. The skyCUBE laser software with file import ensures accurate laser cut geometries. Optimize quality and cutting speed, even on thicker materials, thanks to 6kW of laser power—also when cutting with compressed air. Switch materials while maintaining consistently high cutting quality without compromise. Monitor your production: the large front doors provide convenient access to the entire work area. Place the operator console wherever you prefer. It is mobile, allowing you optimal visibility of the cutting process. Naturally, you can always operate the skyCUBE laser with complete safety. The skyCUBE XLs is a Class 1 laser system. There is no risk of exposure to laser beam emission or reflections during operation. With all our laser systems, nothing is more important than absolute safety and full compliance with the highest standards and regulations. Special safety windows and a perfectly shielded cutting area provide reliable protection from laser radiation hazards, while an independent safety system allows loading without interrupting production. Select the laser power that best meets your requirements; 6 kW is our current standard! (*Pricing depends on equipment and laser power; this is a brand-new laser machine manufactured by us) Iodpfjw Ebzmox Afioia Maximum dimensions (L × W × H): 2310 × 8505 x 2505 mm / Laser machine 4.0 T Power supply depending on laser source (6kW): 400V/50Hz 3-phase / 27kW Process gas control for: oxygen / nitrogen / compressed air, depending on material and process.

Kondisi: baru, Tahun pembuatan: 2026, Pclass = Working area X 1250mm x Y 1250mm x Z 100mm Custom solutions for laser processing available! (* Pricing depends on configuration and laser power; this is a brand-new laser machine manufactured by us) skyCUBE M, P, SL – Laser processing center – the new M, P, or SL Iijdpfx Aecwph Tofisa SLclass = Working area X 1250mm x Y 2550mm x Z 100mm class, more productive with a larger work area, ideal as a laser cutting machine for your metalworking needs Laser processing made simple and highly precise – laser engraving and cutting at high speed and with outstanding quality

Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2026, daya laser: 12.000 W, panjang gelombang laser: 1.064 nm, panjang meja: 1.500 mm, lebar meja: 3.000 mm, jarak pergerakan sumbu X: 1.550 mm, jarak lintasan sumbu Y: 3.050 mm, tegangan masuk: 400 V, jenis arus masuk: tiga fasa, berat keseluruhan: 8.500 kg, masa garansi: 24 bulan, kebutuhan tinggi: 2.400 mm, persyaratan ruang panjang: 8.550 mm, jangkauan kerja: 1.500 mm, Perlengkapan: penghadang cahaya keselamatan, unit pendingin, XL class = machining area X 1550 mm x Y 3050 mm x Z 150 mm High-precision linear axis system with 6 - 12 kW laser power Dual shuttle table system, laser machining at a single working height! (* Pricing depends on configuration and laser power, this is a brand-new laser machine manufactured by us) Iiodpfxsr D Nfks Afija Maximum dimensions (L × W × H (with table 8504) × 2310 × 2400 mm / Laser machine 6.5 t + external loading table 2 t = 8.5 tonnes Power supply dependent on laser source (6kW): 400V/50Hz 3-phase / 27 kW Process gas control for: oxygen / nitrogen / compressed air, depending on material and process Laser machining made easy and ultra-precise – high-speed, high-quality laser cutting