Beli Mit Drehteller Flame Cutting Mesin bekas (84.488)

Tahun pembuatan: 1986, Kondisi: siap digunakan (bekas), nomor mesin/kendaraan: 1602097, A used oxy-fuel cutting machine (3000 x 1800 Corta) manufactured by Messer Griesheim. Type: CORTA KS 1500/2000 Machine number: 1602097 Nodpfx Asd Eg Tlolkola Year of manufacture: 1986 Power supply: 220 V, 50/60 Hz, 1.0 kVA

Kondisi: baik (bekas), Flame cutting device with turntable, ideal for cutting welding bevels. Turntable diameter: 285 mm. Maximum cutting diameter: 600 mm. Total height: 1,150 mm. Width: 900 mm. Depth: 500 mm. Nodped Dti Iofx Alksla

Tahun pembuatan: 2026, Kondisi: seperti baru (mesin pameran), Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: S25Synthesi01, Stretch Wrapper Synthesi TECHNICAL DETAILS Turntable / base frame / Ø 2,200 mm Max. pallet size: 1,550 x 1,550 mm Max. load capacity: 2,000 kg Wrapping height (including pallet): 2,200 mm FILM CARRIAGE TYPE “OPRS - ONE PRE STRETCH” Film pre-stretch ratio set to 200% Film application tension electronically adjustable in several steps via programs Turntable height: 75 mm Height detection by photoelectric sensor Frequency-controlled turntable drive (soft start - start/stop) Frequency-controlled carriage lifting speed up/down Acoustic signal at wrapping start and at end of cycle Emergency stop switch in compliance with CE regulations Turntable always stops in home position Fall protection for film carriage Push button for machine power-on as well as start & stop function & reset according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS AT THE OPERATING PANEL All functional parameters adjustable via display F00 – Display lock for program changes F02 – Steplessly adjustable turntable speed 5-12 rpm Carriage travel speed up and down adjustable independently F03 – Carriage ascent speed from 1.3 to 5.4 m/min F04 – Carriage descent speed from 1.3 to 5.4 m/min F05 – Number of wraps at pallet base (1-10 wraps) F06 – Number of wraps at pallet top (1-10 wraps) F09 – Photo cell wrapping height delay F13 - F16 – Film tension for bottom & top wrapping / ascending & descending can be set independently F62 – Ergonomic height for film change Film consumption display (optional) ADJUSTABLE WRAPPING PROGRAMS AT THE OPERATING PANEL 6 storable wrapping programs F01-1 – Cross-wrapping (up/down) F01-2 – Simple wrapping (up or down only) F01-3 – Push button for manual functions F10-F11 – Wrapping cycle with predefined start and stop height F12 – Wrapping to a stored height (with photo sensor deactivated for height) F22/F23 – Wrapping cycle for top sheet application F29 – Soft start cycle for corner protection application F30-F31 – Reinforced wrapping cycle with adjustable number of wraps Soft start to reduce film breakage on sharp pallet corners Wrapping cycle with manual or motorized rope forming (optional) Reinforcement cycle via push button Options available: Turntable size up to Ø2600 mm Mast height up to 3900 mm Ramp Mounting frame Photo sensor for black products Cutting device etc. Further machines available ex stock Ludwigsburg. Nlsdpsykub Aofx Alksa Some images may show optional equipment subject to surcharge. Illustration similar

Tahun pembuatan: 2021, jam operasional: 10 h, Kondisi: seperti baru (mesin pameran), Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: S21MythoEasyLow04, Demo machine - like new. MYTHO EASY Low Very low-profile system in height Wrapping height: 2400 mm Turntable diameter: 1650 mm LP flat turntable: 30 mm flat, 500 mm long Max. load weight: 1200 kg PowerStretch 200%, adjustable via gears to 150-200-250% Automatic, adjustable double-rope formation - see pictures. Automatic cutting Optional: film clamp on the turntable German Schuko plug 6 individually programmable programs Additional demo units immediately available from stock. Nedox Ta Nxopfx Alkjla Prices ex stock Ludwigsburg

Kondisi: bekas, Tahun pembuatan: 1995, Mesin pemotong CNC-Portal Produsen: Messer Tipe: Omnimat P 7000 Tahun pembuatan: 1995 Kontrol CNC: Global Control Plus Lebar rel: 7.000 mm 8 x burner autogen tipe ALFA 8 x Omnilift 200 Tanpa rel lintasan Tanpa meja Nedpfxoyay Dhe Alkela Tanpa filter 16426

Kondisi: bekas, Tahun pembuatan: 2006, Mesin Pemotong Oksigan CNC Tipe Portal Pabrikan: Bach Tipe: ACK-2D Tahun Pembuatan: 2006 Kontrol CNC: NBS300 Nlodpow El Udjfx Alksa Meja kerja: 1,5 x 6 m 2 torch autogen 16426ä

Kondisi: baik (bekas), Tahun pembuatan: 2011, CNC gantry cutting machine Manufacturer: Microstep Model: MasterCut-AM 9001.20 Year of manufacture: 2011 CNC control: iMSNC with integrated network card Working area: 2,000 x 9,000 mm Extraction table 1 oxy-fuel torch Cutting thickness up to 150 mm 1 plasma marking unit Kjellberg Laser pointer Technical details: 1x oxy-fuel torch (1x fully automatic) 1x plasma marking unit (fully automatic) Kjellberg Finsterwalde MicroStep® CNC machine control iMSNC with integrated network card LCD operator panels on the gantry Laser pointer with automatic offset transmission iMSNC control parameter database / Windows® Programming system “AsperWin-Basic” for programming directly on the machine control Macro library module “AsperWin Select” NC simulator module “AsperWin NC-Sim” Module “Plasma marking” (for scribing) via plasma source Module “THC” / automatic height control via arc voltage USB 2.0 interface for storage medium Remote diagnostics module MicroStep® “iFDS Win” Remote maintenance access via TeamViewer Central gas control via proportional valves Parameter database for 1 torch Energy supply lines Njdpfx Ajudn Rzslksla Gas hoses for heating oxygen, cutting oxygen Acetylene machine cutting torch RHÖNA-Acetylen FIT+ 1 capacitive height control IHT / for oxy-fuel 1 electric ignition unit RHÖNA-Acetylen Double-sided cable protection (collision protection) of the gantry bridge via emergency stop Kjellberg® plasma marking unit FineMarker Fully automatic support for FineMarker Kjellberg® plasma marking system FineMarker CNC interface for FineMarker / integration into CNC control Module for the automatic activation of the marking device 16426ä

Kondisi: baik (bekas), Tahun pembuatan: 2016, CNC-Portal Brennschneidmaschine Hersteller: Sato Typ: Satronik D5765 Baujahr: 2016 CNC-Steuerung: Satocontrol CNC 3010 Spurbreite: 5.750 mm 6 x Autogenbrenner ohne Laufbahn ohne Tisch ohne Filter Nedpfjgqkc Nsx Alkjla 16426ä

Kondisi: bekas, Tahun pembuatan: 2008, FICEP Tipo B 251 Blechbearbeitungszentrum Baujahr 2008 - Blechbearbeitungszentrum Nsdpfxey E N Dpe Alkela - Max. Blechgröße: 6000 x 2500 mm - 1 Bohraggregat - 6-fach Werkzeugwechsler inkl. Markierwerkzeug - 1 Stanzaggregat (derzeit ohne Funktion) - 12-fach Werkzeugwechsler für Stanzwerkzeuge - Förderband für Fertigteile - Hypertherm HPR 260 Plasmaschneidanlage - Donaldson Torit DCE Absauganlage - Maschinengewicht laut Hersteller ca. 23 Tonnen Haupttechnische Daten Blechabmessungen einlaufseitig: • Länge max. 6000 mm, min. 2500 mm • Breite max. 2540 mm, min. 500 mm Werkstückabmessungen auslaufseitig: • Länge min. 200 mm • Breite min. 150 mm Stanzleistungen (bei 400 N/mm² Blechen): • Stanzkraft: 1000 kN • Max. Ausstoßkraft: 100 kN • Max. Lochdurchmesser beim Stanzen: 100 mm • Max. Durchmesser bei 20 mm Materialdicke: 38 mm Weitere Angaben: • Materialdicke (Blech, min.): 6 mm • Materialdicke (Stanztiefe, max.): 25 mm • Materialdicke (thermisches Schneiden, max.): 32 mm • Materialdicke (Bohren mit Zusatzgerät, max.): 100 mm • Positionierbares Gewicht, max.: 5000 kg • Lineargewicht des Blechs, max.: 750 kg/m • Max. Vektorgeschwindigkeit: 30 m/min • Querpositioniergeschwindigkeit: 40 m/min • Arbeitshöhe: 1100 mm

Tahun pembuatan: 2000, Kondisi: bekas, Punching machine Edel HM 35/350 Nedsg Dgyxjpfx Alkela BKE 200/5 Maximum pressure: 35 t Sheet thickness: 5 mm at 40 kp/mm²

Kondisi: hampir baru (bekas), Tahun pembuatan: 2022, plattenbearbeitungsanlage Nsdpsx H T H Refx Alksla

Kondisi: hampir baru (bekas), Tahun pembuatan: 2020, Fungsionalitas: berfungsi sepenuhnya, plattenbearbeitungsanlage Nodpfx Alov Iaqyjkela

Kondisi: bekas, Tahun pembuatan: 1985, nomor mesin/kendaraan: 5801, de-plate-drilling-fdb600 Nljdeibq Itepfx Alkea

Kondisi: siap digunakan (bekas), de-to-hu-it-lt-lv-nb-nl-pl Nsdpsy Ayapjfx Alkela

Kondisi: baik (bekas), Tahun pembuatan: 1966, Perangkat hot stamping foil Original Heidelberg Nsdpfjy Ahmdjx Alkola

Kondisi: bekas, Tahun pembuatan: 1987, Fungsionalitas: berfungsi sepenuhnya, ZINSER Oxy-Fuel Cutting System – CNC 500 – Table 3,000 × 8,000 mm Industrial Version | CNC Controlled | Immediately Available Brief Description: For sale is a robust Zinser oxy-fuel cutting system with Zinser CNC 500 control unit and a large cutting table measuring 3 × 8 m. The system dates from the 1980s and was fully operational until it was professionally dismantled. Njdpfxoyanbbs Alkela The machine is currently dismantled, so a test run is not possible. Inspection of the system and all components is, of course, possible. Technical Data: - Manufacturer: Zinser - Machine type: not specified - Year of manufacture: 1980s - Control: Zinser CNC 500 - Cutting process: Oxy-fuel / Flame cutting - Cutting table: approx. 3,000 × 8,000 mm - Condition: used, dismantled Condition & Classification: - System was in use and fully functional until dismantling - Dismantled in an orderly and professional manner - Heavy-duty industrial design - Mechanics, table and portal in solid condition - Due to its age, not a modern high-speed CNC, but: x very robust x straightforward technology x ideal for recommissioning, modernization, or continued operation Scope of Delivery: - Cutting table 3 × 8 m - Gantry / carriage - CNC control system Zinser CNC 500 - Existing oxy-fuel cutting components - Sale as inspected Inspection & Collection: - Inspection possible by appointment - No test run possible, as machine is dismantled - Loading and transport to be organized by the buyer - Location: Germany

Kondisi: baik (bekas), Tahun pembuatan: 1997, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: ABCM 1250/3, jenis arus masuk: tiga fasa, Gas profile cutting machine for I-beams. Nledpfxerbif Ts Alkoa manufacturer – Peddinghaus, Germany; type – ABCM 1250/3; control – Fagor; The machine is connected and operational.

Tahun pembuatan: 1985, Kondisi: bekas, nomor mesin/kendaraan: 60802 A 17983 J, Cutting current: up to 400 A Space requirements: 820 x 1220 x 930 mm Weight: 750 kg Nods Sdrfjpfx Alksla

Kondisi: sangat baik (bekas), nomor mesin/kendaraan: 02 P 0587, Cutting current: 15 - 40 A Electrical connection: 230 V, 16 A Power requirement: kW Space requirement: 470 x 250 x 250 mm Nlsdpsdyy Diefx Alksa Weight: 10 kg

Tahun pembuatan: 1965, Kondisi: bekas, nomor mesin/kendaraan: 2383, for pipe diameter: 250 - 530 mm for material thickness: 3 - 40 mm driven by: manual operation space requirement: 1000 x 800 x 1200 mm weight: approx. 70 kg Njdpfxeb Nv Stj Alkela

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2024, jam operasional: 15 h, Manufacturer: DURMA Model: HD-FS 3015 Fiber Working Area X-Y-Z: 3100 x 1550 x 125 mm Laser Power: 2000 watts Control: Siemens Sinumerik 840D Operating Hours: 15 h Sheet Thickness - Mild Steel: 12 mm Sheet Thickness - Stainless Steel: 6 mm Sheet Thickness - Aluminium: 6 mm Sheet Thickness - Brass: 6 mm Sheet Thickness - Copper: 3 mm Sheet Size: 3048 x 1524 mm Load Capacity: 200 kg/m² X-Y Axis Speed: 100 m/min Simultaneous X-Y Axis Speed: 141 m/min Positioning Accuracy: +/- 0.05 mm Repeatability: +/- 0.05 mm Installation Area (L/W/H): approx. 10,000 x 7,000 x 2,300 mm Njdpfx Ajdx Ewgelkjla Weight: approx. 13,700 kg Standard Equipment: - Manual single table - Sinumerik 840D control - Manually focusing cutting head Precitec Procutter F125 focus - Automatic sheet position and size measurement system - Automatic nozzle cleaning - Positioning laser diode - Central lubrication system - Chip conveyor - Simple user interface parameter page (power-speed-pressure) - External CAD/CAM programming software with auto-nesting, choice of Metalix or Lantek - Work area lighting - Warning beacon - Multi-chamber extraction system - Special laser cutting options - Remote maintenance - CE marking Additional Equipment: - IPG fiber laser source 2000 watt including chiller - Filter, compact dedusting system Vanterm - Automatic pallet changer - Automatic laser head positioning - Cloud license - Control cabinet air conditioning The machine can be viewed and demonstrated at our showroom in Staufenberg by appointment at any time. Further machines are available for demonstration at our premises in Staufenberg. Further information available upon request.

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2024,

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2024, daya laser: 10.000 W, ketebalan lembaran (maks.): 30 mm, ketebalan pelat baja (maks.): 30 mm, tebal plat aluminium (maks.): 30 mm, ketebalan lembaran kuningan (maks.): 20 mm, ketebalan pelat tembaga (maks.): 15 mm, kecepatan pemposisian: 5 m/menit, akurasi pengulangan: 5 mm, berat keseluruhan: 12.000 kg, masa garansi: 12 bulan, jangkauan kerja: 3.050 mm, Perlengkapan: penghadang cahaya keselamatan, Manufacturer: DURMA Model: HD-F 3015 III Fiber Working Area X-Y-Z: 3060 x 1530 x 160 mm Laser Power: 10,000 Watt IPG Control: Siemens Sinumerik 840D Operating Hours: 0 h Sheet Thickness Mild Steel: 30 mm Sheet Thickness Stainless Steel: 26 mm Sheet Thickness Aluminium: 15 mm Sheet Thickness Brass: 20 mm Sheet Thickness Copper: 15 mm Sheet Size: 3048 x 1524 mm Load Capacity: 200 kg/m² X-Y Axis Speed: 100 m/min Nsdpfx Alodx Naleksla Simultaneous X-Y Axis Speed: 280 m/min Positioning Accuracy: +/- 0.05 mm Repeatability: +/- 0.05 mm Installation Dimensions (L/W/H): approx. 14,500 x 7,500 x 2,420 mm Weight: approx. 12,000 kg Standard Equipment - Automatic pallet changer - Sinumerik 840D control - Precitec Procutter F150 focus autofocus cutting head - Automatic sheet position and size measuring system - Automatic nozzle cleaning - Positioning laser diode - Central lubrication - User-friendly interface (parameter page: power-speed-pressure) - External CAD/CAM programming software with optional Lantek auto-nesting - Work area lighting - Warning light - Multi-chamber extraction system - Special laser cutting options - Remote maintenance - CE marking Advanced Equipment - IPG fiber laser source 10,000 W including chiller - Vanterm compact dust extraction filter - Motorised chip conveyor for small parts/scrap - Laser service set - Cloud license - Lantek Expert Inside software - Lantek software with positioning laser diode and automatic sheet detection & measurement - Automatic nozzle changer The machine can be inspected and demonstrated at our showroom in Staufenberg by appointment at any time. Further machines are ready for demonstration at our Staufenberg facility. Further information available on request.

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2024, Manufacturer: DURMA Njded Sd Tnopfx Alkola Model: HD-F 3015 III Fiber Year of manufacture: 2024 Working area X-Y-Z: 3060x1530x160 mm Laser power: 4000 Watt IPG Control: Siemens Sinumerik 840D Operating hours: 0 h Sheet thickness mild steel: 20 mm Sheet thickness stainless steel: 10 mm Sheet thickness aluminium: 12 mm Sheet thickness brass: 10 mm Sheet thickness copper: 6 mm Sheet size: 3048x1524 mm Max. sheet loading weight: 200 kg/m² X-Y axis speeds: 100 m/min Simultaneous X-Y axis speed: 280 m/min Positioning accuracy: +/- 0.05 mm Repeatability: +/- 0.05 mm Footprint L/W/H: approx. 14500x7500x2420 mm Weight: approx. 12,000 kg Standard features - Automatic pallet changer - Sinumerik 840D control system - Precitec Procutter F150 focus auto-focus cutting head - Automatic sheet position and size measuring system - Automatic nozzle cleaning - Positioning laser diode - Central lubrication - User-friendly parameter page interface (power–speed–pressure) - External CAD/CAM programming software with automatic nesting, optionally Lantek software - Work area lighting - Warning beacon - Multi-chamber exhaust system - Special laser cutting options - Remote maintenance - CE marking Extended features - IPG fiber laser source 4000 Watt including chiller - Filter, compact dust extraction unit Vanterm - Motorised chip conveyor for small parts/waste - Laser service set - Cloud license - Lantek Expert Inside software - Lantek software with positioning laser diode and automatic sheet position recognition/measurement - Automatic nozzle changer - Integrated camera The machine can be inspected and demonstrated at our demonstration center in Staufenberg by appointment at any time. Further machines are available for demonstration at our premises in Staufenberg. Further information available upon request.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2013, MGM Omnicut 3100 ini diproduksi pada tahun 2013. Sebuah mesin pemotong plasma yang kokoh, dilengkapi dengan meja 12 meter dan sumber plasma Kjellberg HiFocus 360i yang bertenaga. Mesin ini dapat memotong baja lunak hingga tebal 80 mm, baja tahan karat hingga 80 mm, dan aluminium hingga 100 mm. Jika Anda mencari mesin dengan kemampuan pemotongan berkualitas tinggi, pertimbangkan MGM Omnicut 3100 yang kami tawarkan. Hubungi kami untuk informasi lebih lanjut. Nlodpfx Alox D Npaskea Jenis Aplikasi Pemotongan