Beli Mitsubishi Sel Perakitan Dengan Robot Mitsubishi Dan Lainnya bekas (8.256)

Kondisi: sangat baik (bekas), Tahun pembuatan: 2010, Fungsionalitas: berfungsi sepenuhnya, Our former assembly cell was only in operation for a few hundred hours (exact number unknown) and is no longer needed, as the conversion to our new product is not worthwhile for us. Due to the low hours, all devices are in very good condition—apart from the batteries, which need to be replaced. Iodpfx Afsri S Hkeisia The complete assembly/robot cell has the following dimensions: Height: 169 cm, Width: 175 cm (150 cm + 25 cm), Depth: 130 cm, Weight: approx. 600 kg The main components of the assembly/robot cell are as follows: - Mitsubishi Robot, model RH-6SH5520-S312, year of manufacture: 2010 - Mitsubishi Teaching Box, model R56TB, year of manufacture: 2010 - 2x ETIPACK labelling units, model CLEAR13, year of manufacture: 2010 Many details can be seen in the photos and documents; for any further information, we are happy to assist.

Kondisi: bekas, Tahun pembuatan: 2017, Sel robot ABB dengan Clean Laser Produsen: ABB / Clean Laser Tipe: IRB4600 Tahun pembuatan: 2017 Sistem terdiri dari: Robot ABB IRB4600 Lemari kontrol Unit pengendali tangan Perangkat pembersih laser Clean Laser tipe intelliScan30 Iijdpfjwrcn Ujx Afisa Unit ekstraksi TEKA 16426ä

Kondisi: belum diuji (bekas), Tahun pembuatan: 2005, Fungsionalitas: belum diuji, nomor mesin/kendaraan: 27876, berat keseluruhan: 4.000 kg, panjang total: 7.000 mm, lebar total: 2.500 mm, tinggi total: 2.700 mm, Tanpa harga minimum – penjualan dijamin kepada penawar tertinggi!\n\nPengajuan penawaran mewajibkan pengambilan tepat waktu antara 08.04.26 dan 16.04.26!\n\nDETAIL TEKNIS\n\nSistem Robot: IRB 1400 M 2000\n\nDETAIL MESIN\n\nTegangan operasi: 3 x 400 V\nFrekuensi: 50/60 Hz\nDaya terpasang: 4,5 kVA\n\nDimensi & Berat\nP x L x T: 7000 x 2500 x 2700 mm\nBerat mesin: 4 t\n\nReferensi eksternal: 8 Iiodpfx Afjyk Hlmsisa

Kondisi: bekas, Tahun pembuatan: 2023, 2023 Cloos Schweißroboterzelle mit QRC-300 Roboter & Qineo Next 452 Premium MIG/MAG-Schweißquelle – inklusive Leuze electronic MLS Sicherheits-Lichtvorhänge, Brenner-Reiniger und Handbediengerät. Doppel-Drehtisch, Tischabmessungen 650 x 450 mm. Cloos QRC-300 Roboter – Schwenkbereich Achse 1: -170° / +170°, Achse 2: -90° / +125°, Achse 3: -220° / +70°, Achse 4: -170° / +170°, Achse 5: -135° / +135°, Achse 6: -300° / +300°. Schwenkgeschwindigkeit Achse 1: 200°/s, Achse 2: 200°/s, Achse 3: 230°/s, Achse 4: 490°/s, Achse 5: 540°/s, Achse 6: 520°/s. Arbeitsbereich Ø3.000 mm. Reichweite 2.000 mm. Traglast 8 kg. Wiederholgenauigkeit +/-0,1 mm. Stellfläche 400 x 400 mm. Gewicht 110 kg. Serien-Nr. 0881590000-20040 (2023). Iodeyx Hzxspfx Afioia Qineo Next 452 Premium – Schweißstrom 25A/15V – 450A/36,5V. Schweißstrom bei 60 % Einschaltdauer*: 450A/36,5V. Schweißstrom bei 100 % Einschaltdauer*: 350A/31,5V. Leerlaufspannung 80V. Netzspannung 380V–480V/3~. Anschlusskabel 4 x 6 mm². Netzsicherung träge 32 A. Schutzart IP. Isolationsklasse F. Kühlart F. Abmessungen L720 x B340 x H500 mm. Gewicht Leistungsmodul 63 kg. Gewicht Kühlmodul 28 kg. Serien-Nr. Qinx 1963 (2023). Drahtvorschubeinheit QINEO NexT – Drahtvorschub 30 m/min, Draht-Ø 0,8–2 mm. Gesamtmaße B350 x T270 x H230 mm. Gewicht 10,2 kg.

Kondisi: bekas, Tahun pembuatan: 2003, Fungsionalitas: belum diuji, nomor mesin/kendaraan: 2735636, tinggi total: 2.300 mm, lebar total: 2.230 mm, panjang total: 4.000 mm, berat keseluruhan: 3.500 kg, Perlengkapan: kabin, Reis Robotics Welding Robot Cell SRV6-C (Year of manufacture 2003) Complete system consisting of robot, positioner, and power source Robot – Reis SRV6-C Type: SRV6-C Manufacturer: Reis Robotics Year of manufacture: 2003 Robot machine weight: 200 kg ID-No.: 2735636 Com.-No.: 52 1050 Axes: 6 Typical applications: MIG/MAG welding Positioner – Reis RND01 (Rotary Table) Type: RND01 Manufacturer: Reis Robotics Iijdpfsyubygsx Afija Year of manufacture: 2003 Com.-No.: 52 1050 Machine weight: 300 kg Function: Single-axis rotary table / welding positioner Application: Fixture holding and rotational positioning for welding Control: Coupled with robot controller Cell control & switch cabinet Type: SRV6-C Manufacturer: Reis GmbH & Co Maschinen-Fabrik Year of manufacture: 2003 Electric connection: Voltage: 3~ 220/400 V Frequency: 50 Hz Connected load: 3 kVA Fuse protection: max. 5 A Pneumatics: Pmin: 5 bar Pmax: not used as per nameplate (no hydraulics available) Control cabinet weight: 125 kg Welding Power Source – Fronius TransPuls Synergic 4000 (TPS 4000) Manufacturer: Fronius Model: TransPuls Synergic 4000 (TPS 4000) Process: MIG/MAG / Pulse / Synergic programs Compatible with Reis robot controllers Accessories: Torch package Hose package Cooling water circuit (external tank visible) Dimensions: 4.0 × 2.23 × 2.3 m (Robot welding cell in closed construction) Operating hour meter: 29,593 h

Kondisi: bekas, Welding cell with 6-axis industrial robot YASKAWA - MOTOMAN - YASNAC Robotic welding system with 2 welding stations, welding robot type YASNAC ERC Serial No. S24174-1-4 Year of manufacture: 1993 2 welding stations (right & left) Working area per side: approx. 600 x 400 mm Table size per side: approx. 1000 x 950 mm Ijdpfxowypqls Afijia Table surface with one working station (without center partition): approx. 2000 x 950 mm - Table size of fixture-changing plate for welding jig setup: 300 x 600 mm - Connection cable robot to control cabinet: 5,000 mm - Freestanding control cabinet with teach-in operating panel (weight approx. 300 kg) - Control cabinet: ENCM-RP692 - Operator control: YZNC-OP186 - Teach panel: JZNC-T834B - Robot: YRFL-NNA06WB - Automation unit by ECKHARDT type ROBO Robot payload: 6 kg Net weight (robot only): 180 kg The entire system is configured as a compact welding cell. Robot control cabinet positioned adjacently. The robot can, of course, also be equipped with a MIG-MAG welding power source. Space requirement for welding cell with robot (L x W x H): 2000 x 2000 x 2300 mm Weight of welding cell with robot: 1055 kg Space requirement for control and control cabinet (L x W x H): 1000 x 850 x 1600 mm Weight of control and control cabinet: 300 kg Overall space requirement of the system (L x W): approx. 3000 x 3000 mm Net weight of the complete system: approx. 1355 kg Good condition Transport dimensions (L x W x H): 3000 x 2200 x 2300 mm

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2025, Fungsionalitas: berfungsi sepenuhnya, kapasitas angkut: 10 kg, jangkauan lengan: 1.418 mm, produsen pengendali: FANUC, model controller: R-30iB Plus, tegangan masuk: 230 V, jenis arus masuk: AC (pendingin udara), akurasi pengulangan: 0,05 mm, masa garansi: 6 bulan, Perlengkapan: dokumentasi / manual, Sel otomatisasi bergerak GEWA "RoboFlex 10", terdiri dari... - FANUC CRX10iA - Kontroler R-30iB Plus - Tablet Teach Pendant - Rangka dasar termasuk 5 grid - Tanpa gripper (opsional tersedia) Sel ini berada di lokasi kami di Eifel dan dapat diperiksa dalam kondisi bertegangan. Penjadwalan janji temu sebelumnya diperlukan. OPSIONAL: Koneksi RoboFlex ke mesin perkakas Anda - Konfigurasi antarmuka otomatisasi - Instalasi dan commissioning - Pelatihan operator (2 jam) - Uji coba dan serah terima dengan pelanggan Isdexrknmspfx Afieia Kami dengan senang hati akan membuatkan penawaran sesuai kebutuhan untuk Anda.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2007, A cell with an ABB Robot IRB 340 M2004 Type B – 34-51225 Ijdpfx Asrbh Uxsfieia One of the fastest pick-and-place robots of the decade Delta robot for high-speed feeding, detail detection, and stacking Quantity: 10 units Year of manufacture: 2008 Controller: ABB M2004 Number of axes: 4 Payload: 1 kg Robot weight: 140 kg Workspace: Diameter – 1,130 mm Height – 250 mm Rotation – unlimited The cell is equipped with two belt conveyors, each 65 cm in length and 100 cm in width. PRICE per complete robot: €6,400 each. PRICE per robot in a cell: €7,100 each (including vision system and software).

Kondisi: sangat baik (bekas), Tahun pembuatan: 2014, Fungsionalitas: berfungsi sepenuhnya, Year of manufacture: 2014 Load capacity: 20 kg Reach: 1726 mm Iisdpfx Asr Aka Asfija

Kondisi: sangat baik (bekas), Tahun pembuatan: 2007, kapasitas angkut: 5 kg, jangkauan lengan: 704 mm, Fanuc LR Mate 200 iC Robot (E-29388) with Cell Vision System Country of origin: Japan Year: 2007 Controller: R-30iA MATE Number of axes: 6 Payload capacity: 5 kg Reach: 704 mm Repeatability: ±0.02 mm Robot weight: 27 kg Camera: Sony XC-56 Iisdpsqgck Dsfx Afisa

Kondisi: sangat baik (bekas), Tahun pembuatan: 2008, kapasitas angkut: 1 kg, ABB IRB 340 M2004 Type B Robot Cell – 34-51225 Country of manufacture: Sweden Year of manufacture: 2008 Controller: ABB M2004 Number of axes: 4 Payload: 1 kg Robot weight: 140 kg Working envelope: Diameter – 1130 mm Height – 250 mm Rotation – unlimited Cell dimensions: Length – 150 cm Width – 145 cm Iisdpfjqffhhox Afioa Height – 240 cm The cell is equipped with two belt conveyors, each with a length of 65 cm and a width of 100 cm.

Tahun pembuatan: 2008, Kondisi: sangat baik (bekas), Robot cell for leak testing consisting of: FANUC LR Mate 200iC/5L robot – year 2008, Measurement table equipped with 8 light curtains, Iodpen D D E Tsfx Afisia 2 Innomatec leak testing devices, type LTC – 502. The cell is equipped with a safety system and CE certification.

Kondisi: sangat baik (bekas), en: Epson G10-854SR Robot Assembly Station / Dispensing Station The assembly station is divided into the following sub-stations: 3.1 Dispensing Area, 3.2 Assembly Area KK+SW, and 3.3 Assembly Area Front. (KK = Heat Sink, SW = Front Wall Bracket) Section 3.1: Dispensing Area - A workpiece carrier (WT) with mounted chassis and circuit boards enters the dispensing area via the transfer belt. - The carrier is stopped at the lifting-positioning unit (HuPo), lifted off the belt, and fixed in position. - The x-y-z handling system moves the dispensing head to the designated position and starts the dispensing process. - Once dispensing is successfully completed, the handling moves to the home position and the WT is placed back onto the conveyor belt. - The carrier is then conveyed into the assembly area KK+SW (condition: no WT in the pick & place position). Section 3.2: Assembly Area KK+SW - A WT moves from the dispensing area into the KK+SW assembly area via the transfer belt. - The carrier is stopped at the lifting-positioning unit (HuPo), lifted off the belt, and fixed in position; at this stage, the side walls of the partially assembled unit's chassis are aligned. - Simultaneously, KK-tray and SW-tray positioning occurs. - A stack of KK-trays (12) and a stack of SW-trays (12) are manually placed onto the respective infeed belts outside the safety enclosure. - The two safety gates are opened and the loaded tray stacks move into the gripping position of each stacker. - The two safety gates are closed again. - The respective grippers pick up the appropriate tray. - Using the Z-axis, trays are separated and transported upwards (above their pick-up height). - For centering and tray stabilization, a centering support is positioned under each tray via x-handling. - The stacker Z-axis then places the respective tray onto the centering support. - The trays are now ready for component removal. - Using the multi-gripper on the SCARA robot, the KK is taken from the tray and placed in an intermediate position for alignment (to compensate for inaccuracies when picking up—maintained gripping position for assembly). - The KK is scanned, picked up again, and if the scanner’s result is OK, it is assembled onto the WT. Isdpfx Aeibx S Nefisia - Defective (n.i.O.) KKs are placed in a defective component box. - The multi-gripper on the SCARA robot then picks up the SW from the tray and places it in the alignment position. - The SW is picked up again and assembled onto the WT. - The process continues with the assembly area front. Technical Data Design: SCARA (4-axis robot) Payload: nominal 5 kg, max. 10 kg Horizontal Reach: 850 mm Vertical Reach: Axis 3: 420 mm Orientation Range: J4: +/- 360° Repeatability Horizontal: +/- 0.025 mm Repeatability Vertical: J3: +/- 0.01 mm Repeatability Orientation: J4: +/- 0.005° Maximum Operating Range: Axis 1: +/- 152°, Axis 2: +/- 152.5°, Axis 3: 420 mm, Axis 4: +/- 360° Maximum Operating Speed: J1, J2: +/- 11,000 mm/s, J3: +/- 2,350 mm/s, J4: +/- 2,400°/s Permissible Moment of Inertia: nominal 0.02 kg*m², max. 0.25 kg*m² User Cabling Electrical: 1x D-Sub 9 pin, 1x D-Sub 15 pin Z-Axis: Outer diameter 25 mm Press-in Force: 250 N Weight: 48 kg Controller: EPSON RC180 Mounting Type: Ceiling IP Protection Class: IP20 Power and Signal Cable: 3m Financing via our bank is possible as well. complete-concept.leasingo.de

Kondisi: sangat baik (bekas), Tahun pembuatan: 2015, Complete robotic welding cell with rotary table and safety enclosure Iedpfx Afjnr E Eneijia Robot: KUKA KR 150 R2700 extra Payload capacity: 150 kg Reach: 2,090 mm Includes welding gun (Dalex, new in 2018) with integrated cooling system (closed-loop water cooling) A complete second welding gun (manufacturer: ARO) is also included in the scope of delivery Dedicated cooling unit installed in the system Automatic rotary table with 10-position indexing (currently set up for 5 stations for current production requirements) Workstation for loading and unloading parts is well-illuminated and safeguarded with light barriers Total system control via Siemens PLC, programmed by HS Automation Siemens operator panel for machine operation mounted on swing arm at the loading station Complete system enclosed with safety housing and safety door The system can still be inspected under power/in operation.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2017, de-hu-it-lt-2024-06-17-01 Iodpfxexbhhcj Afisia

Tahun pembuatan: 2021, Kondisi: siap digunakan (bekas), Robot travel: 5000 mm; arm length: 2500 mm; lift: 1000 mm; swivel radius: 2200 mm; L-manipulator load capacity: 2000 kg; lifting speed: 0.85 m/min; swiveling speed: 1.7/min; rotation speed: 6/min. Robot type: IGM RTE 497-S, suspended position. Control system: fully digital PC-based robot control, type RCE; software: Windows 10 & Linux-based system + igm robot software K6. Welding process: 135 (GMAW), single wire, Ø1.2 mm; welding power source: digital inverter welding power source TPS 500i (500A at 40% duty cycle). Robot peripherals: rotating boom for floor mounting, 2.5 m boom length. Number of workstations: 1. Workstation: 3-axis L-manipulator with lifting device, 2-ton rated load capacity. Safety features: wrist axis gun safety cut-off, emergency stop on hand pendant, manipulators, and control panel, three-color signal lamp for operating mode display, safety door. The machine is complete, no known defects, full documentation, maintained regularly. On-site inspection possible. Isdpfx Afowc A Rdsieia

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2013, Fungsionalitas: berfungsi sepenuhnya, roboter_qrc300_neuwertig_2022 Iodpsiyp Nasfx Afieia

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2008, Fungsionalitas: berfungsi sepenuhnya, berat keseluruhan: 6.200 kg, kapasitas angkut: 200 kg, model controller: KRC 2, Tanpa harga minimum - dijamin terjual kepada penawar tertinggi! RINCIAN TEKNIS Berat palet maks.: 200 kg Iiodsyfgbkepfx Afioa Ukuran palet 1: 396 x 396 x 350 mm Ukuran palet 2: 396 x 600 x 350 mm Jumlah slot palet: 51 DETAIL MESIN Kontrol: KRC 2 Bobot total: 6.200 kg PERLENGKAPAN Dokumentasi/Panduan Kecepatan putar dapat diatur tanpa tingkat Sel robot dengan robot KUKA Panel KPC2 16 palet yang cocok Pelat untuk adaptasi ke mesin Rak Stasiun pengaturan

Kondisi: sangat baik (bekas), Here we offer you an Omron SCARA industrial robot. Omron SCARA industrial robot with PB programming box R6Y XGL400 XG series SCARA robot for industrial applications: • Enhanced reliability (no belts in the XG series, no moving electronic parts) • High precision and speed • Minimal maintenance • Easy operation • High rigidity • Very compact design SCARA, reach: 400 mm, vertical stroke: 150 mm, max. payload: 5 kg Maximum payload range: 1 to 20 kg Reach: 120 to 1,000 mm IP40 Iiodpfx Ash H D Rtefiea Technical specifications: Reach X-axis Y-axis Z-axis R-axis 400 mm Maximum payload X-axis Y-axis Z-axis R-axis 5 kg Repeatability XYZ: +/–0.01 mm R: +/–0.004 Axis specifications: Arm length X-axis 250 mm Y-axis 150 mm Z-axis 150 mm R-axis ---- mm Rotation angle X-axis +/–140º Y-axis +/–144º Z-axis ----º R-axis +/–360º Type: R6Y XGL400150 Condition: used Scope of delivery: (See picture) (Specifications subject to change and errors excepted!) Any further questions can be answered by telephone.

Kondisi: baik (bekas), Dimensions: 4200 x 2750 mm Height: 2400 mm Iisdpfshtzgpox Afisa

Kondisi: baik (bekas), Dimensions: 5500 x 2750 mm Height: 2400 mm Iiedpfx Aohtzgdofisa

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2010, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 5668430QC5A, jarak pergerakan sumbu X: 10.000 mm, torsi: 4.000 Nm, DETAIL TEKNIS Lintasan sumbu X: 10.000 mm Momen inersia massa: 200 kg/m² Torsi: 4.000 Nm Momen putar: 10.000 Nm Iodpfx Afexgqy Eoioia Ukuran pelat penjepit berlubang: sekitar 1.000 x 1.200 mm DETAIL MESIN Daya (pemasok kawat las): 4 kW Daya (Cloos QIROX-C QRC350): 40 kVA PERLENGKAPAN 2 meja putar pengelasan (kiri/kanan), Tipe: WPEK-25000N Perangkat pemutar Robot pengelasan, Produsen: Cloos-Bauer, Tipe: BPF4001/2/4 Pemasok kawat las, Produsen: ESAP Unit ekstraksi asap Berjalan di atas rel Unit las terpisah, Produsen: Cloos, Tipe: GLC603 Quinto Unit kontrol terpisah Rumah panel gelombang dengan 2 pintu geser

Kondisi: baru, Tahun pembuatan: 2026, Assembly Robot BEFARD XGR 800.3 Specification: * Full remote control – for both operation and device management * Three hydraulic extensions with a vertical reach of 5.55 m * Powered by combustion engine (optionally with additional power supply from a 230 V electric motor or Li-ion batteries) * Possibility of simultaneous operation on 230V mains and battery charging (for the Li-ion version) * Dual-circuit vacuum system * Maximum lifting capacity: 800 kg * 8 vacuum suction cups * Rotating frame with suction cups (hydraulic) – remote control operation * Side shift of the suction cup frame (right/left by 10 cm – hydraulic) * Tilting frame with lateral suction cups (manual or hydraulic, depending on the machine) * Tilting frame with suction cups (enables lifting from a horizontal to a vertical position hydraulically) * Non-marking tracks * Two operating modes – fast and slow * Choice of colour Additional optional equipment: * HS spacers Iiodpfx Aoibqr Tefisa * Valves * Frame tilting with suction cups (hydraulic – remote control) * Forks * Anti-overload system * Hook * LED lamp * 230 V wired power supply (for combustion engine version) Other available models: XGR800.1 with one hydraulic extension, vertical reach 3.9 m XGR800.2 with two hydraulic extensions, vertical reach 4.75 m Petrol engine – VANGUARD brand, 10 HP / 5.5 kW

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2001, Robotic 3D welding station consisting of a welding robot and two rotary tables. Dimensions of the rotary tables: 2000 mm x 1000 mm Includes: Isdpfep Am T Uox Afieia - 2 x rotary tables with 3-phase SEW-EURODRIVE motors - rotary table dimensions: 2000 mm x 1000 mm - Welding wire feed station included. - 7-axis robot manipulator OTC Daihen IRB-651 with linear rail, teach pendant, and OTC Daihen Corporation L5561 control cabinet - OTC Daihen Digital Pulse CPDP-350 power supply for the welding robot inverter - 3-phase isolation transformer - NORATEL 3LT20.0-400/200-23 - 3-phase transformer DAIHEN W-L00557 - Documentation for the OTC Daihen robot. The station is ready for operation.

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2017, jam operasional: 6.012 h, kapasitas angkut: 3.500 kg, tinggi angkat: 3.700 mm, pengangkatan bebas: 1.700 mm, pusat beban: 500 mm, jenis bahan bakar: diesel, tipe tiang: dupleks, tinggi konstruksi: 2.500 mm, produsen motor: Mitsubishi S4S, tipe perpindahan gigi: otomatis, panjang garpu: 1.300 mm, kondisi ban: 90 persen, berat keseluruhan: 5.110 kg, berat kosong: 3.500 kg, tinggi total: 2.500 mm, panjang total: 2.800 mm, lebar total: 1.300 mm, berat muatan maksimum: 3.500 kg, bahan bakar: diesel, Perlengkapan: garpu palet, geser samping, pencahayaan, Nowa cena 14 900 EUR // Stara cena 18 900 EUR Mitsubishi W BARDZO DOBRYM STANIE Sprzedajemy wózki widłowe po pełnym serwisie. Przygotowane dla użytkownika końcowego. Możemy zorganizować transport na terenie Europy i na całym świecie. ===== WhatsApp po angielsku w godzinach 9:00–21:00 WhatsApp po niemiecku w godzinach 9:00–21:00 WhatsApp po francusku w godzinach 9:00–21:00 WhatsApp po rosyjsku (francuski tekst) w godzinach 9:00–21:00 ===== Jesteśmy firmą specjalizującą się w wózkach widłowych 4-kierunkowych, bocznych oraz przeciwwagowych. Nasz zespół to wykwalifikowani fachowcy z ponad 20-letnim doświadczeniem w branży wózków widłowych i maszyn budowlanych. Ijdpfsy Av Snsx Afioia Zatrudniamy najlepszych mechaników w branży wózków widłowych w Polsce i mamy wielu zadowolonych klientów w całej Europie. Jesteśmy także producentem palet EPAL EUR i słyniemy z doskonałej jakości oraz terminowości dostaw. Przed dostawą do klienta urządzenie jest testowane oraz przechodzi pełny przegląd serwisowy. Wszelkie niezbędne naprawy są wykonywane. Klient otrzymuje wózek gotowy do pracy. Na terenie Polski, na życzenie klienta, możemy przeprowadzić odbiór techniczny Urzędu Dozoru Technicznego. Naszą główną misją jest satysfakcja klienta oraz rozwiązywanie jego problemów logistycznych. Wiemy, jak dobrze przygotować maszynę, aby klient był w pełni zadowolony i polecił nas innym. Zapraszamy do kontaktu oraz skorzystania z naszych usług. Potrzebujesz dostawcy wózków widłowych? Skontaktuj się z nami.