Beli Modul Penguat Spindel bekas (9.123)

Kondisi: baik (bekas), Spindle amplifier module, servo amplifier module, CNC control system, plug-in card -Manufacturer: FANUC -Type: A06B-6152-H045#H580 -Dimensions: 150/380/H290 mm Dksdpewrxzwsfx Aaqsl -Weight: 8.2 kg

Kondisi: bekas, Direct current main spindle drive, converter unit with digital control Simoreg V55 Spindle module, drive controller, rectifier, DC controller Manufacturer: SIEMENS Type: SIMODRIVE 6RA2725-6DV55-0 D380/60 Mreq-GdG6V55-3A0 Version: V55 base unit Input voltage: 3-phase 380 V AC Input frequency: 50 / 60 Hz Input current: 49 A Output voltage: 380 V DC Output current: 60 A Rated power: 22 kW Dimensions (W x H x D): 270 x 260 x 290 mm Weight: approx. 25 kg The drive controller is still operational in a Gildemeister GDM42. Djdsh D Syrepfx Aaqjkl The matching drive motor can be found under stock number 60347. Further components from the Gildemeister can be found under stock numbers: 60346, 60347, 60348.

Kondisi: sangat baik (bekas), bosch-dm4k7101d-1070079646-208 Dedpfxek Szy Uj Aaqokl

Kondisi: bekas, Servo amplifier module, CNC control system, plug-in card - Control system originates from: a Hitachi Seiki HC400 machining center - Manufacturer: FANUC - Type: A06B-6058-H334 - Dimensions: 450/250/H180 mm - Weight: 9.6 kg Dodpfx Ajdryd Dsaqskl

Kondisi: baik (bekas), Servo amplifier module, CNC control system, plug-in card, - Manufacturer: FANUC - Type: A06B-6127-H209 - Dimensions: 90/380/H310 mm - Weight: 6.2 kg Dkjdpfx Aajwrx Hmeqol

Kondisi: siap digunakan (bekas), Bosch SPM 17 spindle module S/N 298871, professionally overhauled and tested, 100% fully functional, scope of delivery as per photos Dodpji D Ufzjfx Aaqekl

Kondisi: hampir baru (bekas), Tahun pembuatan: 2022, Fungsionalitas: berfungsi sepenuhnya, NC joining module by Kistler NCFH 30 400 300 B H C G 30 kN Dksdpfx Aewhvrreaqel Brake 18 Nm Year of manufacture according to seller: 2022 Previously used in a test setup for pressing battery cells, so it has seen little use. Including control cabinet, joining module (incl. sensor as shown), and monitor. Note: The components should be complete, but some cables have been cut off. Unfortunately, the wiring diagram is not available.

Kondisi: bekas, Schaffner high-current EMC filter type FS 20364-1200-99 3-phase, 3 x AC ballast, mains connection module, line filter Input voltage: 3 x 400 VAC Input frequency: 50 / 60 Hz Rated current: 3 x 1200 A Dimensions (W x H x D): 135 x 260 x 235 mm Dkedpfed D Dh Asx Aaqsl Weight: 27.5 kg Very good condition, from warehouse clearance, unused 2 units available, price per unit

Kondisi: bekas, Technical data: Spindle diameter: 35 mm Spindle height: 145 mm Max tool size: 220 mm Speeds: 2900/4400/6000/8000/10000 rpm Manual spindle height adjustment Spindle lock Worktable dimensions: 300x1100 mm Adjustable fence arms Motor power: 5.5 kW Power supply: 380 V Manufacturer: Casadei Overall dimensions: Length: 1170 mm Width: 800 mm Dedpfx Aajh Dzxzoqskl Height: 1230 mm

Kondisi: baru, Technical data: Spindle diameter: 35 mm Spindle height: 140 mm Speeds: 1300/2500/3500/5000/6000/8500 rpm Electric spindle height adjustment Spindle lock Worktable dimensions: 700 x 1200 mm Dsdshp N Nbopfx Aaqjkl Adjustable fence arms Motor power: 4 kW Power supply: 380 V Manufacturer: Paoloni Overall dimensions: Length: 1200 mm Width: 850 mm Height: 1340 mm

Tahun pembuatan: 1989, Kondisi: hampir baru (bekas), Spindle diameter 30 mm Motor power 5.5 kW 5 spindle speeds: 3000/4500/6000/8000/10000 rpm Djdpfxjhi Tv Hs Aaqjkl Year 1989 Option to purchase without feed

Kondisi: baru, Bosch SPM 50 modul spindle SN:372860, bekas, dengan tanda pemakaian normal, 100% berfungsi, lingkup pengiriman sesuai foto Dedpfjx Eqzcjx Aaqjkl

Kondisi: siap digunakan (bekas), Bosch SPM 17-TB Modul Spindel, No. seri sesuai foto, bekas, direkondisi dan diuji secara profesional, dengan garansi 12 bulan, 100% berfungsi, cakupan pengiriman sesuai foto. Dodpfx Aoi D Uf Noaqokl

Kondisi: baru, Bosch SPM 75-TD modul spindle SN, belum pernah digunakan, 100% berfungsi, ruang lingkup pengiriman sesuai foto Dksdpsi D Ugmefx Aaqol

Kondisi: baru, Bosch SPM 75-TD modul spindle SN, belum pernah digunakan, 100% berfungsi, lingkup pengiriman sesuai foto Dksdpfji D Ugijx Aaqsl

Kondisi: baik (bekas), Tahun pembuatan: 1984, Max. wheel diameter: 250 mm Wheel width: 275 mm Module (max.): 6 Machine weight: approx. 5.5 t The gear hobbing machine ZFWZ 250 is suitable for the efficient production of all indexable cylindrical gears such as: Dkjdpov T Nqaefx Aaqel - Straight and helical spur gears, worm wheels and worms, splined shafts, keyed shafts, broached profiles, chain and ratchet wheels, as well as conical and crowned straight and helical gears. Change gears and milling accessories Technical data: - Max. workpiece diameter: 250 mm - Max. module: 6 mm - Max. axial feed travel: 275 mm - Max. tangential feed travel: 100 mm - Max. helix angle: 45 degrees - Max. cutter diameter: 145 mm - Max. cutter length: 170 mm - Min. clamping surface (table): 195 mm - Max. clamping surface (table): 470 mm Performance Cutter speeds - Stepped in 2 ranges: 56 ... 250 rpm - (Standard version): 90 ... 400 rpm - Infinitely variable in 2 ranges: 63 ... 180 rpm - (Special version with DC motor): 140 ... 400 rpm Weight - Net machine weight: approx. 5,000 kg - Electrical cabinet: approx. 800 kg - Hydraulic unit + coolant tank + chip conveyor: approx. 700 kg Overall dimensions (with oil mist filter) - Length: Standard version: 3,950 mm DC drive: 3,450 mm (or 3,350 mm as per table) - Width: 3,300 mm - Height: Machine: 1,980 mm Machine with DC drive: 2,150 mm Electrical cabinet: 2,200 mm

Kondisi: bekas, Tahun pembuatan: 1989, Wheel diameter – max. 400 mm Wheel width 275 mm Module – max. 6 Machine dimensions 300x310x245 cm Machine weight approx. 5.0 t Specification: - Maximum wheel diameter: 400 mm - Minimum module: 1 - Maximum module: 6 - Table diameter: 370 mm - Maximum wheel diameter: with counter support: 340 mm / without counter support: 400 mm - Max. axial offset: 275 mm Dkedpfju A I Elox Aaqjl - Max. tangential adjustment: 100 mm - Max. helix angle: 45 degrees - Max. cutter diameter: 145 mm - Max. hob length: 170 mm Performance - Cutter speed: 50-200 rpm - Steplessly adjustable axial feed: 0.2-10 mm/rev - Stepless tangential feed: 0.1-5 mm/rev - Radial feed for spur gears: 0.1-4 mm/rev - Radial feed for worm wheels: 0.025-1 mm/rev - Rapid traverse, axial: 500 mm/min - Rapid traverse, tangential: 250 mm/min - Radial for spur gears: 400 mm/rev - Radial for worm wheels: 100 mm/rev - Motor power: 7.4 kW Weight - Machine 5000 kg - Electrical cabinet approx. 800 kg - Hydraulic unit, coolant tank, chip conveyor approx. 700 kg Dimensions - Length with chain drive (standard): 2950 mm with DC drive: 3350 mm - Width: 3100 mm - Height of machine: 1980 mm Electrical cabinet approx.: 2400 mm Machine with DC drive approx.: 2150 mm

Kondisi: bekas, Tahun pembuatan: 1998, Diameter benda kerja pada rasio transmisi 1:10 300 mm Diameter benda kerja pada rasio transmisi 1:1 212 mm Jumlah gigi - maks. 200 Jumlah gigi - min. 6 Pergerakan x 300 mm Dksdpfxjul El Tj Aaqel Kecepatan sumbu X 0,1-5.000 mm/detik. Pergerakan y 400 mm Kecepatan sumbu Y 0,1-5.000 mm/detik. Sumbu A -170 / +170 ° Kontrol Siemens Sinumerik 840 C Kebutuhan daya total 38 kW Berat mesin sekitar 10 t Kebutuhan ruang sekitar 4,20 x 2,20 x 2,10 m

Kondisi: bekas, Tahun pembuatan: 2015, Technical details: Dsdpfxsl Ha Ubo Aaqekl Machine weight approx.: 4 t

Tahun pembuatan: 2016, Kondisi: bekas, MODUL - H80 - 2016 - kondisi bekas sesuai yang terlihat pada foto - dalam keadaan menyala, dapat diuji Dedpjyl Sitofx Aaqekl - foto tambahan tersedia

Kondisi: sangat baik (bekas), The Hurth Modul ZSTK 251 bevel gear planing machine was designed as a special-purpose machine and is used by manufacturers of drive systems in the drive technology, automotive, agricultural machinery, machine tool, mining technology, aerospace, and textile machinery industries for hobbing straight bevel gears with short runout. Djdpfxjup T Rlo Aaqekl We currently have 1 machine in stock. In combination with the Klingelnberg BF 203 bevel gear milling machine, it is also capable of producing high-quality crowned bevel gear sets. Technical data: - Workpiece diameter: 315 mm - Max. module: 10 mm - Face width: 45 mm - Dimensions: 2.7 x 2.3 x 2.1 m - Weight: 7,000 kg * All information and data are non-binding. Subject to prior sale. Inspection under power possible by appointment.

Kondisi: bekas, Module milling cutter Module 8 20 degrees Dksdpfedklt Nsx Aaqel Length 1800 mm Diameter 120 mm Bore 40 mm

Kondisi: siap digunakan (bekas), Bosch SPM 25 spindle module SN:305445, the spindle module has been factory-refurbished by the manufacturer, used, normal signs of wear, 100% functional, scope of delivery as per photos. Dodpei D Uf Tofx Aaqekl

Kondisi: siap digunakan (bekas), Bosch SPM 25-T/A spindle module SN: 490842, the spindle module has been factory overhauled by the manufacturer, used, normal signs of wear, 100% fully functional, scope of delivery as per photos Dkjdpfsi D Ugbox Aaqol

Kondisi: siap digunakan (bekas), Bosch SPM 25 modul spindel SN:349005, bekas, dengan tanda pemakaian normal, 100% berfungsi, pengiriman sesuai foto. Dsdpfx Aex Eqy Ssaqjkl