Beli Omga Tr 2B - Nc bekas (16.642)

Kondisi: baik (bekas), Gergaji potong sudut ganda otomatis dengan posisi terkontrol secara numerik untuk pemotongan bingkai, profil kayu, furnitur, kusen jendela kayu, pintu, material plastik, dan lain-lain - Standar CE Data teknis: Pgjdpfexztydjx Al Iok - Posisioner terkendali secara numerik: memungkinkan penyimpanan daftar pemotongan dan posisi kepala bergerak secara otomatis - Panjang pemotongan: 3500 mm - Diameter pisau: 350 mm, lubang 30 mm - Daya motor per unit: 2,2 kW - RPM: 3000 - Lebar pemotongan: 170 mm - Tinggi pemotongan pada 90°: 102 mm - 2 penjepit pneumatik vertikal - Diameter mulut penyedot: 80 mm - Tekanan udara terkompresi: 6-7 bar - Dimensi keseluruhan (mm): 4400 x 1000 x 1500 h - Berat: 600 kg

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2014, Fungsionalitas: berfungsi sepenuhnya, ENGLISH_TRANSLATION_DOPPELTE_GLASLEISTENSÄGE_TRF_527_NC_FP_CA_MM _4000_Type_Plate_Description Double mitre saw for the simultaneous cutting of two glazing beads positioned one above the other. Right saw unit is fixed; adjustment of the left unit to the set cutting length can be read from a digital display. Units are equipped with supports that enable the simultaneous cutting of 2 glazing beads. For cutting larger cross-sections, the upper support can be removed. Upon completion of the cutting process, the pneumatic clamping cylinders automatically swing to the side to facilitate loading and unloading of the machine. STANDARD FEATURES • Fixed right unit • Digital gauge • Pressure switch • 2 HM-tipped saw blades • Electrical system with motor brake, undervoltage release, and motor protection switch • Pressure switch • Tool kit • Guards with horizontal, pivotable clamping devices Pgjdpfxjy Er Iko Al Isk • Two-hand control • Belt drive • Pneumatic unit lift • Central support TECHNICAL DATA • Motor power: 2 x 1.2 kW • Saw blade diameter: Ø 220 mm • Max. cutting height without support: 80 mm • Max. cutting width at 90 degrees: 55 mm • Max. cutting width at 45 degrees: 40 mm • Max. cutting length: 4000 mm • Min. cutting length: 158 mm • Weight: approx. 290 kg • Space required (standard features): approx. 4,500 x 1,000 mm 1 set of 2 mechanical stops for setting up to 4 intermediary angles. Additional central support. 1 set of adapters for rebated profiles 1 set of adapters for rebated profiles as per drawing: - Adapters on the clamping devices to compensate for the profile angle - Shims on the rear stops of the units and the central piece (shown in green in the sketch below) is a chamfered pressure piece that follows the inclined profile and presses it against the shim (drawn in red) on the stop. All information without guarantee.

Kondisi: bekas, Tahun pembuatan: 2002, GERGAJI MITRA GANDA (GERGAJI LIS KACA) OMGA TRF 527 NC termasuk pembatas bintang Tahun pembuatan: 2002 Pgodpfx Alsxwumqo Iek Jarak minimum & maksimum antar unit: 158 mm, 2800 mm Kapasitas potong pada 90 derajat: 55 mm Kapasitas potong pada 45 derajat: 40 mm Tinggi potong maksimum: 40 mm Daya motor: 2 x 1,18 kW Lubang mata gergaji: 30 mm Diameter mata gergaji: 220 mm Kecepatan spindle: 5000 rpm

Kondisi: sangat baik (bekas), NOMOR KATALOG 7065 DATA TEKNIS - diameter maksimum pisau: 300 mm - diameter spindle: 30 mm - pelindung pisau: 2 buah - pemotongan pneumatik (gerakan pisau naik/turun) - unit pemotongan dapat diatur pada sudut 45° - pengaturan manual jarak antar unit pemotongan - panjang potong minimum pada 90°: 220 mm Pedpfx Aloyyyw Ao Iegk - panjang potong maksimum pada 90°: 2820 mm - lebar potong: 110 mm - tinggi potong pada 90°: 90 mm - penjepit pneumatik: 2 buah - pedal kontrol - penyangga material - motor utama: 2×1,6 kW - dimensi (P/L/T): 3620x1100x1250 mm - berat sekitar 500 kg – tidak dicat – unit pemotongan dapat dimiringkan – gergaji bekas, kondisi sangat baik Harga netto: 13.900 PLN Harga netto: 3.300 EUR tergantung kurs 4,2 EUR (Harga dapat berubah sewaktu-waktu mengikuti fluktuasi nilai tukar)

Kondisi: bekas, Tahun pembuatan: 2023, Double Glazing Bead Saw TRF 527 VIS CE 1 unit DOUBLE GLAZING BEAD SAW TRF 527 VIS CE TRF 527 VIS: Double mitre saw for simultaneous cutting of two glazing beads positioned on top of each other. The right saw unit is fixed, the left unit is adjustable; the set cutting length can be read from a digital display. Both units are equipped with supports, enabling the simultaneous cutting of two glazing beads. For cutting larger cross-sections, the upper support can be removed. After the cutting process, the pneumatic clamping cylinders automatically swivel out of the way to simplify loading and unloading of the machine. Psdpfx Ajxnlgcol Ijgk STANDARD EQUIPMENT - Fixed right-hand aggregate - Digital measurement display - Pressure switch - 2 carbide-tipped saw blades - Electrical system with motor brake, undervoltage release, motor protection switch - Pressure switch - Tool kit - Safety devices with horizontal, swiveling clamping system - Two-hand operation - Belt drive - Pneumatic aggregate lift - Central support TECHNICAL DATA - Motor power: 2 x 1.2 kW - Saw blade diameter: Ø 220 mm - Max. cutting height without support: 80 mm - Max. cutting width at 90°: 55 mm - Max. cutting width at 45°: 40 mm - Max. cutting length: 2,800 mm (optionally 4,000 mm) - Min. cutting length: 158 mm - Weight: 217 kg - Space requirements (standard configuration): 3,000 x 850 mm Extended cutting capacity: 1 unit Max. cutting length: 4,000 mm Star stop with four positions: 1 unit Set of 2 mechanical stops for setting up to 4 intermediate angles Additional central support: 1 unit Adaptations for rebated profiles: 1 unit Adaptations for rebated profiles as per drawing: - Fitting on the clamping devices to compensate for the profile inclination - Inserts on the rear stops of the saw units and on the central support In the sketch below (in green), a beveled pressure piece is shown, following the inclined profile and pressing it against the (red) insert at the stop. Location: Garbsen

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, diameter mata gergaji: 300 mm, panjang total: 405 mm, lebar total: 90 mm, tinggi total: 125 mm, berat keseluruhan: 500 kg, OMGA TR2 twin-blade crosscut saw for wood and aluminium – fully serviced, ready for operation Specification: • Condition: Used, after comprehensive technical maintenance • Manufacturer: OMGA • Model: TR2 • Main motors: 2 x 2.2 HP (3,000 rpm) • Pneumatic head control • Max cutting length: 320 cm • Min cutting length: 15 cm • Max cutting section: 85x140 mm (at 90°) • Max blade diameter: 300 mm Pgodpfey Dpxdex Al Ijk • Mitre cutting range: -45° to +45° (left/right) • 3 operating modes • Vertical workpiece clamps • Weight: approx. 500 kg • Dimensions (L x W x H): 405 x 90 x 125 cm Additional information: • The machine is in good technical condition and ready for immediate use • The photos show the actual item for sale • On-site inspection and testing available • The auction price is net (excludes VAT and transport costs) Financing and transport: • We organize transport using MDD fleet, courier services, or external carriers • Financing available – leasing or lease loan options possible

Kondisi: baik (bekas), Tahun pembuatan: 2000, I am selling a double mitre saw OMGA TR2A. Podpfx Aletwbcye Iogk Cutting length: 390 - 3000 mm Maximum cutting width: 170 mm Maximum cutting height: 90 mm Swivelling heads: 0° ± 45° 2 horizontal + 2 vertical pneumatic material clamps 2 motors x 1.62 kW (2.2 HP) Good condition. Available immediately.

Kondisi: siap digunakan (bekas), Indramat 2AD 132B-B35RB1-BS03-A2N1 asynchronous main drive motor SN: 9474, used, normal wear and tear, 100% operational, scope of delivery as per photos. NOTE: Please enquire separately for packaging and shipping costs! ATTENTION: Please enquire for charges for packing and transport separately! Pjdpfx Aotqqwyol Ijgk

Kondisi: siap digunakan (bekas), Indramat 2AD132B-B35RB1-BS03 motor penggerak utama asinkron SN:2930, bekas, dengan tanda-tanda pemakaian normal, 100% berfungsi, kelengkapan sesuai foto. PERHATIAN: Biaya pengemasan dan pengiriman harap ditanyakan secara terpisah! Psdpfx Aei D Ifyol Isgk

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2001, DOUBLE mitre saw Lignum OMG TR 2 DOUBLE mitre saw Lignum Double Lignum mitre saw Invincibile OK Super 350 mm Used 2001 Pgedjlhr Ezopfx Al Isk To be done: Double-sided mitre saw Lignum Model: Invincibile OK Super 350 mm Description: DOUBLE MITRE SAW, double mitre saw, 2 x 350 mm tilting saw blades, sliding, rated current 21 amps, 50 Hz, 3-phase blade speed 3000 rpm. Year of manufacture: 2001. Condition: very good Year: 2001

Kondisi: baru, Eine Doppelblattsäge, die speziell für das präzise Ablängen von Glasleisten entwickelt wurde, mit der Möglichkeit für gerade oder Gehrungsschnitte. Die Maschine verfügt über zwei übereinander angeordnete Arbeitsebenen, sodass zwei Leisten gleichzeitig geschnitten werden können. Während des Schneidvorgangs werden die beiden Leisten vorne durch pneumatische Spannvorrichtungen sicher fixiert. Die Längeneinstellung erfolgt über ein Handrad, das den linken Sägekopf relativ zum feststehenden rechten Sägekopf bewegt; die Länge kann einfach von der mechanischen Digitalanzeige abgelesen werden. Min./Max. Schnittlänge: 150mm - 2400mm Max. Schnittbereich bei 90°: 55 x 100mm Max. Schnittbereich bei 45°: 40 x 100mm 2 x Sägeblätter Ø220mm mit 30mm Bohrung Motor: 1,6 PS, 3-phasig CE-Sicherheitsanforderungen Pgodpfx Ajdy Hqvsl Isk

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2008, Laser Baublys 3-sumbu dengan kontrol UL 65QR/NC 100 50 50 SOMA ini diproduksi pada tahun 2008. Mesin ini dilengkapi dengan laser state solid Nd:YAG Q-switched, yang dapat mencapai frekuensi hingga 50 kHz. Perangkat ini memiliki meja transfer bundar sekitar 75 cm dan ditempatkan dalam housing berukuran 2,4 x 2,6 meter. Jika Anda mencari solusi penandaan laser berkualitas tinggi, pertimbangkan mesin Baublys Control Laser UL 65QR/NC 100 50 50 SOMA yang kami tawarkan untuk dijual. • Jenis laser: laser state solid Q-switched • Media laser: Nd:YAG • Panjang gelombang: 1064 nm • Kualitas sinar (M²): 13 (6 kHz, MM); Podpfex Sz Efex Al Iegk

Kondisi: sangat baik (bekas), Tahun pembuatan: 2013, jam operasional: 150.494 h, Fungsionalitas: berfungsi sepenuhnya, Lini las dan pembersih GRAF SYNERGY / FIMTEC, tahun 2013. Arah kerja dari kiri ke kanan. Mesin las empat kepala SL4U, ukuran maks. 2800 x 3200 mm, min. 400 mm, limbah 0,2 mm. Mesin pembersih WP CNC 2 TR. Stasiun pendinginan. Pisau untuk membersihkan permukaan datar dengan alur dan permukaan halus. Hanya melakukan 150494 siklus – kondisi teknis sangat baik. Pgjdpfx Aljyyxvwe Iok

Kondisi: bekas, Tahun pembuatan: 2004, Slot spindle 2 pcs Number of milling units: 7 pcs Spindle diameter: 50 mm Control: CNC, Weinig PC-Nexus Weinig Uncontrol 12 with radial and axial NC spindles and VARIO table ..... Machine has already been professionally dismantled and stored in 73447 Oberkochen Technical Data Summary (possibly included additional accessories available upon request) ..... Pgodeyrtzkopfx Al Iek Cross-cut saw ..... > Cross-cut saw, electronic, horizontally adjustable steplessly > Number of tools: 1 pc. > Spindle speed: 3,000–6,000 rpm > Spindle diameter: 40 mm > Max. tool diameter: 400 mm > Motor power: 3.7 kW > Laser guide light for cut section identification > Axial adjustment range 150 mm, NC axis, electronically stepless > Radial adjustment range pneumatic, 8 positions, e.g. for top edge rounding Rounding Unit ..... > Position: horizontal, bottom > Axial adjustment together with the cross-cut saw. Electronic length stop ..... > Length: 4,500 mm 1st Tenoning and Slotting Spindle ..... > Number of tools: variable > Motor power: 15 kW > Spindle diameter: 50 mm > Tool clamping length: 640 mm, with counter bearing > Axial adjustment range: 580 mm, NC axis, stepless > Spindle speed: 2,800–4,000 rpm > Tool diameter: 380–400 mm > Synchronous counter pressure, full clamping length is countered 2nd Tenoning and Slotting Spindle ..... > Number of tools: variable > Motor power: 15 kW > Spindle diameter: 50 mm > Tool clamping length: 640 mm, with counter bearing > Axial adjustment range: 580 mm, NC axis, stepless > Spindle speed: 2,800–4,000 rpm > Tool diameter: 380–400 mm > Synchronous counter pressure, full clamping length is countered Transfer belt ..... For transfer of parts to longitudinal processing, including double part separation before infeed to the longitudinal machining section. 1st Profiling Spindle (Climb and Conventional Milling) ..... > Position: vertical right > Number of tools: variable > Motor power: 11 kW > Spindle diameter: 50 mm > Tool clamping length: 400 mm, with counter bearing > Axial adjustment range: 350 mm, NC axis, stepless > Radial adjustment range: 80 mm, NC axis, stepless > Spindle speed: 6,000 rpm > Min. tool cutting diameter: 140 mm > Max. tool cutting diameter: 232 mm 2nd Profiling Spindle ..... > Position: vertical right > Number of tools: variable > Motor power: 11 kW > Spindle diameter: 50 mm > Tool clamping length: 400 mm, with counter bearing > Axial adjustment range: 350 mm, NC axis, stepless > Radial adjustment range: 80 mm, NC axis, stepless > Spindle speed: 6,000 rpm > Min. tool cutting diameter: 140 mm > Max. tool cutting diameter: 232 mm 3rd Profile Milling Unit (Grooving device from above) ..... > Position: horizontal top > Motor power: 3.0 kW > Spindle diameter: 40 mm > Tool clamping length: 40 mm > Axial adjustment range: 30 mm, NC axis, stepless > Radial adjustment range: 125 mm, NC axis, stepless > Spindle speed: ...

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1998, Fungsionalitas: berfungsi sepenuhnya, diameter mata gergaji: 850 mm, lubang pisau gergaji: 10 mm, TECHNICAL DETAILS Saw Blade Diameter (without loader): 80 – 850 mm Saw Blade Diameter (with loader): 250 – 450 mm Bore Diameter (from): 10 mm Saw Blade Magazine: up to 40 pieces Control and Software Control: Industrial PC with Siemens standard PLC Software: For all tooth profiles, including special shapes Pgjdpfx Aljypbx Ej Isk Grinding Process Sequence 1st Step: After starting, the vacuum gripper picks up the topmost saw blade from magazine 1. Transfer to the Woodtronic NC4, cover opens. 2nd Step: Loader returns. The Woodtronic NC4 is closed and the grinding program starts. The loader removes the spacer ring from magazine 1 and places it in magazine 2. Standby position. 3rd Step: After the grinding process and opening of the Woodtronic, the loader removes the ground saw blade and places it in magazine 2. Process Repetition Steps 1 to 3 are repeated until the grinding process is completed. Pre-programming possible: Grinding operation runs uninterrupted even when programming the next magazine. The Woodtronic NC4 can be pre-programmed during the day and grinds automatically at night. Measurables with WALTER Saw Check: Rake angles, Clearance angles, Diameter, Number of teeth Tooth form: manual entry required MACHINE DETAILS Operating hours: 4,197 h (according to previous owner, unverified information) EQUIPMENT - Automatic loader - Walter Saw Check - Measuring device for carbide-tipped circular saw blades

Kondisi: bekas, Tahun pembuatan: 1986, Schleiflaenge-Text-01 Psdsytx Ifjpfx Al Iogk

Kondisi: bekas, Slot spindle 2 pcs. Number of milling units: 7 Spindle diameter: 50 mm Control: Weinig, PC-Nexus Weinig Unicontrol 12 with radial and axial NC spindles, as well as VARIO table and trimming carriage ..... Machine properly dismantled and stored at our warehouse in 73447 Oberkochen. Video and pictures were taken prior to disassembly. Technical Data Summary (Please inquire separately for any potentially included accessories) ..... Cross-cut saw ..... > Cross-cut saw, electronic, horizontally infinitely adjustable > Number of tools: 1 pc. > Spindle speed: 2,800 rpm > Spindle diameter: 40 mm > Max. tool diameter: 400 mm > Motor power: 3.7 kW > Laser guide light for identifying cutting section > Axial adjustment travel: 150 mm, NC axis, electronically infinitely adjustable > Radial adjustment: pneumatic, 8 positions, e.g. for top edge rounding Rounding unit ..... > Position: horizontally bottom > Motor power: 1.5 kW > Spindle diameter: 20 mm > Clamping length: 25 mm > Spindle speed: 9,000 rpm > Max. tool diameter: 130 mm > Axial adjustment: mechanically linked with cross-cut saw. > Radial adjustment: pneumatically controlled On/Off electronic length stop ..... > Length: 4,500 mm 1st tenoning and slotting spindle ..... > Number of tools: variable > Motor power: 15 kW > Spindle diameter: 50 mm > Clamping length: 640 mm, with counter bearing > Axial adjustment travel: 580 mm, NC axis, infinitely adjustable > Spindle speed: 2,800 rpm > Max. tool diameter: 400 mm > Counter hold, complete clamping length is counter-supported 2nd tenoning and slotting spindle ..... > Number of tools: variable > Motor power: 15 kW > Spindle diameter: 50 mm > Clamping length: 640 mm, with counter bearing > Axial adjustment travel: 580 mm, NC axis, infinitely adjustable > Spindle speed: 2,800 rpm Podpfx Aljx H Al Ns Isgk > Max. tool diameter: 400 mm > Counter hold, complete clamping length is counter-supported Transfer belt ..... For transfer of parts to longitudinal processing, including double-part separation before infeed to longitudinal processing. 1st profiling spindle (climb and conventional milling) ..... > Position: vertical right > Number of tools: variable > Motor power: 11 kW > Spindle diameter: 50 mm > Clamping length: 400 mm, with counter bearing > Axial adjustment travel: 350 mm, NC axis, infinitely adjustable > Radial adjustment travel: 80 mm, NC axis, infinitely adjustable > Spindle speed: 6,000 rpm > Min. tool cutting circle: 140 mm > Max. tool cutting circle: 232 mm > 2 feed rollers opposite to spindle, axially pneumatically controlled, 8 positions > Table plate pneumatically adjusted to tool diameter 2nd profiling spindle ..... > Position: vertical right > Number of tools: variable > Motor power: 11 kW > Spindle diameter: 50 mm > Clamping length: 400 mm, with counter bearing > Axial adjustment travel: 350 mm, NC axis, infinitely adjustable > Radial adjustment travel: 80 mm, NC axis, infinitely adjustable > Spindle speed: 6,000 rpm ...

Kondisi: siap digunakan (bekas), Lehmann NC indexing device with PL gearbox 420-112 rotary table, serial number: A4199. New material number: 829070AR1 / Old material number: WM780647B. Used, normal signs of wear, 100% functional, delivery scope as per photos. ATTENTION: Please enquire separately for packing and shipping costs! Pgedpfxot Sn Uds Al Ijk

Kondisi: siap digunakan (bekas), coax 5-PCD-2 15 NC cartridge valve, used, normal signs of wear, 100% functional, scope of delivery as per photos Pgsdpsi D Umaofx Al Iek

Kondisi: baru, Müller co-ax 5-PCS-2 15 NC valve dengan penggerak eksternal 24V DC, belum pernah digunakan, 100% berfungsi, cakupan pengiriman sesuai foto Pjdpfoi Eb Tdjx Al Isgk

Kondisi: baru, müller co-ax 5-PCS-2 10 NC valve dengan penggerak eksternal 24V DC, belum digunakan, 100% berfungsi, cakupan pengiriman sesuai foto Podei Eb Taopfx Al Iegk

Kondisi: bekas, Slot spindle 1 pc Number of milling units: 4 pcs Spindle diameter: 50 mm Control: Weinig, PC-Nexus Weinig Unicontrol 10 CNC – spindles CNC-controlled, radial and axial ----- Machine was factory overhauled by Weinig in 2024. During the overhaul, the control system was also updated to Siemens S7 677 C with a new “Touch” membrane panel. Equipped with the following machining units: Cross-cut saw ----- with laser guide light, motor power 3 kW, spindle diameter 40 mm, spindle speed 3,000 rpm axial adjustment via NC axis radial adjustment pneumatically in 8 positions for edge rounding from above Bottom-mounted edge rounding unit ----- axial adjustment together with the cross-cut saw Pgjdpfexpi Duex Al Isk Tenoning and slotting spindle ----- motor power 15 kW spindle diameter 50 mm spindle speed 2,925 rpm tool swing diameter min. 380 mm, max. 400 mm tool clamping length 640 mm axial adjustment via CNC axis axial adjustment travel 580 mm axial adjustment speed 100 mm/sec 1st profile spindle (climb and conventional milling) ----- motor power 11 kW spindle diameter 50 mm spindle speed 6,000 rpm tool clamping length 400 mm with counter bearing axial and radial adjustment via CNC axis 2nd profile spindle ----- motor power 11 kW spindle diameter 50 mm spindle speed 6,000 rpm tool clamping length 400 mm with counter bearing axial and radial adjustment via CNC axis Horizontal profile milling unit (top) ----- motor power 3 kW spindle diameter 40 mm spindle speed 9,000 rpm pneumatic adjustment in 8 axial and radial positions Vertical profile milling unit (right side at machine outfeed) ----- motor power 3 kW spindle diameter 40 mm spindle speed 5,850 rpm pneumatic adjustment in 8 axial and radial positions Additional equipment: ----- CNC-controlled length stop, mounted on slotting table, for workpiece lengths up to 3500 mm, incl. cross-cut saw position integrated in control. Studio sash window device, swiveling ±60° Twin part package with automatic singulation and transfer Climb milling facility with window automation for window rebating Rebating cart for rebating of small sash widths Climate unit in control cabinet PC control NEXUS Automatic turning system Lamella conveyor, incl. return belt for transporting workpieces back to operator (Technical data according to manufacturer – no liability accepted).

Kondisi: bekas, Slot spindle 1 pc. Number of milling units: 5 pcs. Spindle diameter: 50 mm Control: Weinig, PC-Nexus #2774 Weinig Unicontrol 6 with NC spindles Machine will be cleaned and completely inspected prior to delivery ----- Technical Data Summary (additional accessories possibly included upon request) Pos. 1: Crosscut Saw ----- > Number of tools: 1 pc. > Spindle speed: 2,800 rpm > Spindle diameter: 40 mm > Max. tool diameter: 400 mm > Motor power: 3 kW > Radial adjustment pneumatically controlled in 8 positions, e.g., for edge rounding from above > Laser alignment light for recognizing the saw section Pos. 2: Rounding Unit Horizontal Bottom ----- > Position: horizontal bottom > Motor power: 1.5 kW > Spindle diameter: 20 mm > Clamping length: 25 mm > Spindle speed: 9000 rpm > Max. tool diameter: 130 mm > Axial adjustment mechanically coupled to crosscut saw > Radial adjustment pneumatically controlled on/off NC-controlled length stop ----- > Length: 3500 mm > Electronic length stop Pos. 3: Tenoning and Slotting Spindle ----- > Number of tools: variable, stepless adjustment, NC > Tool clamping length: 320 mm > Vertical spindle stroke: variable 254 mm, stepless, NC-controlled > Spindle speed: 3,500 rpm > Max. tool diameter: 320 mm > Spindle diameter: 50 mm > Max. tool diameter: 320 mm > Motor power: 11 kW Pos. 4: 1st Profiling Spindle (climb and conventional milling) ----- > Position: vertical right > Number of tools: 1 pc. > Tool clamping length: 120 mm > Spindle speed: 6,000 rpm > Spindle diameter: 50 mm > Max. tool diameter: 232 mm > Motor power: 7.5 kW Pos. 5: 2nd Profiling Spindle ----- > Position: vertical right > Number of tools: variable, stepless adjustment, NC > Tool clamping length: 320 mm > Vertical spindle stroke: variable 254 mm, stepless, NC-controlled > Spindle speed: 6,000 rpm > Spindle diameter: 50 mm > Max. tool diameter: 232 mm > Motor power: 11 kW 2 feed rollers opposite the spindle, axially pneumatically controlled, 2 positions Sash bar guide consisting of: Guide fence on the stop (area of climb-cut spindle), Sash bar support rail from above in the area of vertical right profiling unit and profiling spindle. Pos. 6: Profiling/Milling Unit, Horizontal Top ----- Pgsdpjvu Hghjfx Al Isk > Clamping length: 40 mm > Spindle diameter: 40 mm > Motor power: 3.0 kW > Speed: 9,000 rpm > Max. tool diameter: 130 mm > Axial adjustment: 30 mm, 8 positions > Radial adjustment: 125 mm, 8 positions Pos. 7: 3rd Profiling Spindle (Fitting Spindle) ----- > Position: vertical right > Tool clamping length: 160 mm > Axial adjustment: 115 mm, 8 positions > Radial adjustment: 110 mm, 8-position turret > Spindle speed: 5,850 rpm > Spindle diameter: 40 mm > Max. tool diameter: 210 mm > Motor power: 3.0 kW Pos. 8: Profiling/Grooving Unit from Below ----- > Motor power: 3.0 kW > Tool clamping length: 125 mm > ...

Kondisi: bekas, Slot spindle 1 pc. Number of milling units: 4 pcs. Spindle diameter: 50 mm Control: Weinig, PC-Nexus # 2764 Weinig Unicontrol 6 with NC spindles ----- Machine will be cleaned and thoroughly checked prior to delivery Technical Data Summary (Please enquire regarding any additional included accessories) Pos. 1: Crosscut Saw ----- > Electronic, horizontally adjustable crosscut saw (stepless) > Number of tools: 1 pc. > Spindle speed: 2,800 rpm > Spindle diameter: 40 mm > Max. tool diameter: 400 mm > Motor power: 3.0 kW > Laser guide for saw cut identification > NC length stop, mounted on slot table included Positioning of the crosscut saw integrated into the control system. > Length: 3500 mm Pos. 2: Tenoning and Slotting Spindle ----- > Number of tools: variable, stepless adjustment via NC axis > Tool clamping length: 320 mm > Vertical spindle stroke: variable, stepless adjustment 254 mm via NC axis > Spindle speed: 3500 rpm > Spindle diameter: 50 mm > Max. tool diameter: 320 mm > Motor power: 11 kW Pos. 3: 1st Profiling Spindle (Climb and Conventional Milling) > Position: vertical right > Number of tools: 1 pc. > Tool clamping length: 120 mm > Spindle speed: 6,000 rpm > Spindle diameter: 50 mm > Max. tool cutting circle: 232 mm > Motor power: 7.5 kW Pos. 4: 2nd Profiling Spindle ----- > Position: vertical right > Number of tools: variable, stepless adjustment via NC axis > Tool clamping length: 320 mm > Vertical spindle stroke: variable, stepless adjustment 254 mm via NC axis > Spindle speed: 6,000 rpm > Spindle diameter: 50 mm > Max. tool cutting circle: 232 mm > Motor power: 11 kW 2 feed rollers opposite the spindle, axially controlled pneumatically, 2 positions Sash bar guide consisting of: Guide rail at the fence (climb-milling spindle area), Sash bar support from above in the area of the vertical right profile milling unit and profiling spindle. Pos. 5: Horizontal Top Profile Milling Unit ----- > Clamping length: 40 mm > Spindle diameter: 40 mm > Motor power: 3.0 kW > Speed: 5,850 rpm > Max. tool cutting circle: 130 mm > Axial adjustment 30 mm, 8 positions via pneumatic turret > Radial adjustment 125 mm, 8 positions via pneumatic turret Pos. 6: 3rd Profiling Spindle (Fitting Spindle) ----- > Position: vertical right > Tool clamping length: 160 mm > Axial adjustment 115 mm, 8 positions via pneumatic turret > Radial adjustment 100 mm, 8 positions via pneumatic turret > Spindle speed: 5,850 rpm > Spindle diameter: 40 mm > Max. tool cutting circle: 210 mm > Motor power: 3.0 kW Additional Features ----- > Online capable > Rebating unit for tear-free rebating > Double part clamping kit > Return feed device for one-person operation: swivel belt > Screen control > Angled window device > Electronic angle display for angled windows Pgsdpfx Aljvu Hfqs Iek > Industrial PC, PC control/NEXUS > Weinig type manufacturing program > Supplied without machining tools No original images yet available. Photos show a similar machine from our archive ----- Price for the above machine on request! ----- Option at extra charge: EUR 6,500.00 Note...

Kondisi: siap digunakan (bekas), Bosch PS200 CNC power supply Philips PE 2189/01 NC 9415 DC 20–40V 235W, used, normal signs of wear, fully functional, scope of delivery as per photos Psdoulqg Njpfx Al Iegk