Beli Pabrik Pelapis Bubuk bekas (3.751)

Kondisi: baik (bekas), Tahun pembuatan: 2013, Kontrol pusat Booth penyemprotan bubuk otomatis WAGNER (bagian yang sudah dipra-perlakukan), termasuk unit suplai bubuk WAGNER SuperCenter (2013) Sistem penyemprotan bubuk manual (seri kecil, warna campuran) dengan pistol semprot Separator siklon Oven pengering air berbahan bakar gas blok. oven pengering dan pemanggang (termasuk boiler) Komponen berlapis bubuk dibakar di oven pembakaran bubuk yang dipanaskan dengan gas alam Pendinginan setelah pengeringan air Hfedpfx Ahoyhbdfsnsh Pendinginan setelah pembakaran bubuk Sistem penanganan Kapasitas pengolahan air limbah otomatis: maks.: ~1 m³/jam

Kondisi: baik (bekas), Tahun pembuatan: 2018, Fungsionalitas: berfungsi sepenuhnya, en Hodpfoy Al T Iex Ahnefh

Kondisi: baru, The perfect coating for long-lasting protection. Powder coating is a highly effective and widely used method for applying a protective and decorative finish to various types of surfaces. It is a dry finishing process in which a fine powder consisting of resins, pigments, and additives is applied to a substrate. The powder is electrostatically charged, allowing it to adhere evenly to the surface and form a uniform coating. To achieve optimum adhesion and durability, the substrate is thoroughly cleaned and prepared beforehand. Oils, dirt, and other contaminants are removed to ensure a clean surface. This is essential for the powder to bond effectively with the substrate and to achieve a robust, long-lasting finish. Components of a Powder Coating System A powder coating plant typically consists of various components and equipment required for the application and curing of powder coatings. Spray Booth and Application Area The booth provides a clean environment for the application process and ensures even distribution of the powder. Powder Coating Gun A powder coating gun is used to apply the powder coating material to the workpiece. Powder Feed System The powder feed system consists of a hopper or container where the powder coating material is stored. It usually includes devices such as powder pumps, feed hoses, and powder sieves to convey the powder from storage to the spray gun. Pretreatment Equipment Pretreatment equipment is used to prepare the substrate before powder coating application. This includes processes such as cleaning, degreasing, rinsing, and surface treatment to ensure optimum adhesion and coating durability. Curing Oven A curing oven is an essential part of a powder coating system. It is used to heat the coated substrate to the proper temperature, allowing the powder coating to melt, flow, and harden into a durable surface. The oven typically features a conveyor system or racks to transport coated parts through the oven chamber. Extraction System An extraction system is installed in the facility to remove excess powder, fumes, or volatile compounds generated during the coating process. It helps maintain a clean and safe working environment for personnel and prevents powder particle accumulation in the air. Looking for a powder coating solution? Are you searching for a tailored powder coating system? We specialize in delivering custom powder coating solutions tailored to your specific requirements. Whether you have particular color specifications, intricate designs, or challenging substrates, our experienced team is ready to deliver exceptional results. Hjdsun Sd Ujpfx Ahnjfh Contact us today to discuss your requirements and let us design a bespoke powder coating solution for you. Get in touch with us today!

Kondisi: bekas, lacquer roller coater, roller application machine, powder coating plant -Powder coating plant: used for the production of slats/blinds Hfjdpfxjgal Ans Ahnsh -Pneumatic components: manufacturer Festo -Gear motor: WEG 0.25 kW -Dimensions: 3400/850/H1935 mm -Weight: 746 kg

Kondisi: baik (bekas), Lacquering roller machine, roller coating machine, powder coating system Hedpfx Asgal Agjhnsfh -Drying and exhaust: used for the production of slats/venetian blinds -Dimensions: 2950/800/H1920 mm -Weight: 484 kg

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2012, Fungsionalitas: berfungsi sepenuhnya, panjang total: 90.000 mm, jarak pergerakan sumbu X: 2.600 mm, jarak lintasan sumbu Y: 4.000 mm, panjang meja: 4.000 mm, lebar meja: 2.600 mm, en Hodpfx Ahsyk S Uysnjfh

Tahun pembuatan: 2008, Kondisi: siap digunakan (bekas), A complete large-scale powder coating feed plant by MEEH for powder coating and dust extraction systems is available. Product dimensions (X/Y/Z): 8000mm/800mm/3000mm, maximum product weight: 1000kg, total area of all openings: 12.9m², max. permissible powder application rate: 90kg/h, extraction capacity: 18,000m³/h, overall system dimensions (X/Y/Z): approx. 28m/13m/6m, compressed air requirement: approx. 38nm³/h, compressed air pressure: 8 bar, connected load: approx. 30kW. 1) Manual powder coating station with extraction, internal dimensions (X/Y/Z): 10m/3m/4m, external dimensions (X/Y/Z): 10040mm/3370mm/4600mm. 2) Chamber dryer MEEH KTÖ240, year of manufacture: 2008, air capacity: 30,000m³/h, heating capacity: 240kW, burner: Weishaupt, burner year: 2019, fuel: heating oil, oven internal dimensions (X/Y/Z): approx. 8530mm/4610mm/5840mm, oven external dimensions (X/Y/Z): approx. 8200mm/3500mm/4000mm. 3) Lift and lower station with 2 chain hoists H/S 160, year of manufacture: 2008, speed: 4m/min, max. load capacity: 2x500kg, distance from bottom of crossbeam to floor: approx. 3700mm. 4) Electric transverse transfer carriage EQ 160, year of manufacture: 2008, max. load capacity: 2000kg, speed: 12m/min, max. traverses: 3, total traverses: 14, total traverse stations: 14, traverse length: 8m, load capacity: 1000kg. Documentation available. An on-site inspection is possible. Hfsdswr Dv Hspfx Ahnjh

Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, daya: 55 kW (74,78 hp), Tahun pembuatan: 2026, de Hfsdjq Nf U Ejpfx Ahnjh

Tahun pembuatan: 2013, Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: GE-KEK-100L, Teljes porszóró rendszer eladó, amely magában foglalja a kémiai előkezelő kabint, a porszóró fülkét és a beégető kemencét. A rendszer teljesen működőképes, jó állapotban karbantartott, azonnal elérhető. Ideális fémmegmunkáló műhelyek, kisipari gyártók vagy bérbevonó vállalkozók számára. A berendezés megfelel az EU ipari szabványoknak, és teljes elektromos vezérlőrendszert tartalmaz. Tartozékok 1️⃣ Kémiai előkezelő kabin Kézi permetezéses kémiai előkezelő egység porszórás előtti felület-előkészítéshez. Kabin mérete: 1600 × 1600 × 2200 mm Vegyszertartály kapacitása: ~800 L Szivattyú / permetező egység: ST84 HE Fűtőbetétek: 2 × 6 kW Víz hőmérséklet: 45–60°C Motorteljesítmény: ~1,5 kW Elektromos csatlakozás: 3×380/220 V Zárt keringető rendszer Vegyszerálló kivitel 2️⃣ Ipari porszóró fülke Külső méretek: 1850 × 1600 × 2600 mm Légszállítás: 3000 m³/h Motor: ~1,5 kW Szűrőpatronok: 2 db automatikus tisztítással Légsebesség: 0,2–0,5 m/s Max. akasztási méret: 250 × 1000 mm Permetező nyílás: 1100 × 1100 mm Tartozékok: Elszívó ventilátor hangtompítóval Hfjdsygg Rnspfx Ahnjh Sűrített levegő előkészítő egység Automatikus szűrőtisztító rendszer Porvisszanyerő tartály EU-s szabvány vezérlőszekrény Állapot: jó műszaki állapot, rendszeres karbantartással 3️⃣ Ipari bejárható porszóró beégető kemence Belső méret: 1300 × 1300 × 2200 mm Munkahőmérséklet: 180–200°C Átlagos beégetési idő: 15–25 perc Fűtőteljesítmény: 2 × 12 kW (elektromos) Keringtetett levegő: 1250 m³/h Elvezetett levegő: 100 m³/h Motorteljesítmény: ~1,5 kW Szigetelés vastagsága: 150 mm Gyártás éve: 2013 Tartozékok: Szigetelt kamra ajtóval Keringtető ventilátorrendszer Fűtőelemek Túlmelegedés elleni védelem Légáramlásmérő EU-s vezérlőszekrény Acél vázszerkezet Állapot: kiváló, üzemképes, teljes dokumentációval Általános információk Rendszer típusa: Porszóró vonal Állapot: nagyon jó Évjárat: 2013 Dokumentáció: elérhető Üzemállapot: teljesen működőképes Elérhetőség: azonnal Ár 💰 19 900 EUR (a teljes rendszer) Lokáció Magyarország – EU Ideális fémmegmunkáló műhelyeknek kis porszóró üzemeknek ipari karbantartó műhelyeknek bérbevonó szolgáltatásokhoz.

Kondisi: baru, Tahun pembuatan: 2024, Fungsionalitas: berfungsi sepenuhnya, Price when purchasing a powder coating system – negotiable!! • Electrical data 100-240V 50-60Hz • Powder output up to 200g / min • Air consumption up to 250L / min at 6 bar • Air quality / moisture less than 1.3 g / nm3 • Air quality / oil less than 0.1 mg / nm3 Powder Coating Gun Data • Output voltage 100 kV • Max. output current 100 µA • Hose length 6 m – antistatic hose • Polarization Negative • Compliance ATEX 2mJ Description • Manual coater for quick color changes directly from the box • Intuitive 7" touch display • Automatic cleaning function – gun rinsing • Up to 20 user-defined programs • 3 automatic programs • Remote control of powder feed and program change from the handle -- Equipment • PSS series controller Hfjdpfx Aog U I Ugohneh • ProfiJector RI-1 blunt powder injector • ProfiGun powder gun with quick coupling and remote control • Hose set • Stand with vibrator and extraction unit with fluidization PSS Controller • 7-inch touch panel operable with gloves • 3 automatic programs (overcoating, difficult-to-reach areas, flat surfaces) • Graduation in 0.1kV and 0.1uA increments • Advanced pneumatic valves for precise air dosage control (romer – patent pending) • Real air flow measurement responds to errors such as pressure loss or system clogging • Advanced diagnostic tools • Capability to name programs • Option to control external master controllers via ModBus protocol (A series) ProfiGun PM-1 Gun • Lightweight, ergonomic gun, perfectly balanced with a contoured handle • The ceramic cascade with up to 100,000V efficiently charges all types of powders • New nozzle generation ensures perfect powder penetration into complex shapes • Profiled nut enables a good grip • The conductive, high-carbon handle provides excellent grounding for the operator • Spray gun made from high-impact resistant special materials • Fully disassemblable design with interchangeable powder pathway tube • Spray gun is patented in the USA and EU • Cascade polarity – negative ProfiJector Powder Coating Pump Description • Design of a new efficient injector • Most effective feed angle proven by research • Saves powder and air compared to right-angle injectors • Offers comparatively low operating costs versus other pumps • Injector is protected by a European patent

Kondisi: baru, Tahun pembuatan: 2024, de Hodpjflpi Nsfx Ahnjfh

Tahun pembuatan: 2025, Kondisi: baru, Ovens for curing, as shown in the photos, can vary in price depending on size, configuration, and optional features. At ROMER, we produce both standard models and fully customized solutions tailored to your process needs. Simply provide us with your part dimensions, line capacity, curing profile, and available floor space, and we will recommend the optimal setup and options that deliver real improvements in daily performance. Hedjfx Nfmspfx Ahnjfh Control and Monitoring - Real-time control of temperature, time, airflow, and operating modes—featuring alarms and recipe storage for repeatable cycles. Heating Module - Rapid heat-up and stable temperature using efficient heating elements for fast energy transfer. Air Circulation - Uniform airflow ensures minimized temperature variance and consistent coating quality. Insulation and Construction - Advanced chamber design reduces heat loss for quicker setpoint achievement and lower energy consumption. Safety and Certification - Equipped with sensors, interlocks, and protective logic to maximize operational safety and reliability. High Efficiency - Optimized heat transfer and minimized losses result in tangible energy savings. Automatic Start - Programmable scheduling enables automatic preheating before shifts, streamlining production startup. Self-Latching Doors & Intelligent Chimney - Prevents unintentional opening; chimney operates only when necessary for increased safety. ECO Mode - Low-consumption standby mode cuts energy use by up to 20%, depending on the process. Inspection Window and Lighting - Enables inspection without opening the door, reducing heat loss and simplifying supervision. Guide Rails & Automatic Heat Hood - Heat hood activates only during loading to avoid temperature drop; automated rail infeed enhances ergonomics and loading speed. Multi-Zone Heating - Independent zone control for precise curing of parts with varying mass and geometry. MTS System - Heating elements installed without thermal bridges for higher efficiency and faster heat-up times. 2-in-1 Split Chamber - Movable partition provides two independent zones—allowing drying and curing in a single unit, maximizing flexibility. VFD Ventilation - Variable fan speed control based on chamber conditions for improved accuracy and reduced power consumption.

Tahun pembuatan: 2020, Kondisi: baru, Transport systems Depending on the customer's requirements, transport systems can be either floor-based or suspended from rails. - For convenient solutions in manual installations, we recommend suspended cross-transfer systems (lateral transport). - In automated systems, chain conveyors are most commonly used. These systems operate continuously without stopping, making them an excellent solution for businesses focused on process quality and repeatability. - For companies manufacturing a variety of products simultaneously, such as those with multiple booths for different paint colors, flexible solutions using power-and-free conveyors are implemented. This is the most expensive option. All installations are custom-made according to customer requirements. Continuous suspended chain transport systems are designed and manufactured to the client’s specifications. Within this system, it is also possible to provide floor conveyor systems to transport items such as flowerpots or rims (see photo). ROMER also manufactures suspended transport systems. Hsdpfx Ahsfz Dubonsfh Cross-transfer units are engineered and built to meet the demands of specific installations. Photoelectric cell application The use of a photoelectric cell in the detail zone allows for measurement of the part’s length, enabling the automatic activation of spray guns when the part is within range and their immediate deactivation after coating. The photoelectric cell is supplied as standard equipment. Detailed recognition using special markers. Above the carrier there are plates with identification holes. In conjunction with the photoelectric cell, the PLC controller identifies coated workpieces, turning the spray guns on and off at the correct times—saving both energy and powder. Vertical shape detection. By using light barriers with horizontal sensors, the PLC controller can also analyze the vertical shape of a component. The PLC controller times the appearance of the part in the gun zone, allowing for selective activation or deactivation of spray guns. With multi-sensor horizontal and vertical light barriers, This solution enables precise measurement of workpiece dimensions, allowing for the control of manipulators as well.

Tahun pembuatan: 2020, Kondisi: baru, 7-inch Touch Panel The large color touch panel makes parameter input even easier and more convenient. 5 Programs with 50 Steps Each You can program up to 5 heating curves, each with a maximum of 50 steps. This feature is especially useful for complex processes. Information about Gas and Oil Consumption Oil and gas consumption is calculated based on the burner settings. This function allows you to estimate fuel consumption and the overall operating costs. USB Memory Hfjdpofz Apqsfx Ahnoh Every firing process is logged, and the process data can be transferred to a USB stick for evaluation on a PC. Each file is automatically created and corresponds to a single firing process, recording peak temperatures and exact times. The file is saved in *.csv format (Excel spreadsheet). This option is free for all buyers until the end of 2016; with other manufacturers, this can cost several thousand euros. Storage of the Last 20 Firing Processes Problem with a batch? Not enough components coming out of the oven? Now you can review the precise parameters of the firing process—such as duration or potential issues. New! Timer Function You can set the start time so that the oven powers up automatically before the workday begins. Built by professionals for professionals. Automatic Exhaust System The exhaust system can be programmed to open a few minutes before the firing process ends, allowing the smoke to be removed from the chamber. The exhaust system can be controlled via the touch panel. Process Duration Timer Heating dynamics are used to calculate the process duration. The display shows when the firing process will end. Self-Closing Doors To open, simply pull the door. To close, just push gently—the door will close automatically. Exhaust Hood Above the Door (optional) To minimize heat loss in the production hall when opening the door, an exhaust hood above the door extracts hot air. Partition (optional) The partition is suitable for large ovens when you want to use only parts of the oven. The oven is equipped with a movable divider and special control system. 2-in-1 (optional) It's possible to use both chambers independently—for example, running the firing process in the first chamber while drying occurs in the second.

Tahun pembuatan: 2020, Kondisi: baru, Touch delete ROMER cabins are equipped with 4-inch color touch lights. The cabin interface is intuitive and available in three operating modes: automatic (temporary), automatic (via plug-in filter cartridge), or manual. Filter Cartridge Sensor The cabins are equipped with a sensor that detects filter clogging and prompts cleaning. The system also notifies when the filters have already been used. Automatic Filter Cleaning The electronic system for automatic filter cleaning controls both the cleaning intervals and the burn-off timing. Each filter is cleaned individually, and filters can also be cleaned manually using presses. From experience, we know it can be difficult to rely on the operator to clean the filters. Thanks to this system, the operator no longer needs to intervene manually. Low Noise Level Aluminum fans are very quiet, operating within a range of 74-79 dB. Even with standard cabin design, it is difficult to hold a conversation due to the quiet operation. Boilers are separated from the cabin. Hfsdpfofz A Ilsx Ahnjh Hanging “squirrel cage” design inside the cabin improves workflow, allowing painters to work without manual handling. Early booking of construction recommended. All remaining cabins are designed to prevent the rise of explosive mixtures during the painting process. Every subcomponent has been carefully selected to minimize this risk.

Tahun pembuatan: 2020, Kondisi: baru, Touch delete ROMER cabins are equipped with 4-inch color touch lights. The cabin interface is intuitive and available in three operating modes: automatic (temporary), automatic (via plug-in filter cartridge), or manual. Filter Cartridge Sensor Hfodpfefzktzjx Ahneh The cabins are equipped with a sensor that detects filter clogging and prompts cleaning. The system also notifies when the filters have already been used. Automatic Filter Cleaning The electronic system for automatic filter cleaning controls both the cleaning intervals and the burn-off timing. Each filter is cleaned individually, and filters can also be cleaned manually using presses. From experience, we know it can be difficult to rely on the operator to clean the filters. Thanks to this system, the operator no longer needs to intervene manually. Low Noise Level Aluminum fans are very quiet, operating within a range of 74-79 dB. Even with standard cabin design, it is difficult to hold a conversation due to the quiet operation. Boilers are separated from the cabin. Hanging “squirrel cage” design inside the cabin improves workflow, allowing painters to work without manual handling. Early booking of construction recommended. All remaining cabins are designed to prevent the rise of explosive mixtures during the painting process. Every subcomponent has been carefully selected to minimize this risk.

Tahun pembuatan: 2025, Kondisi: baru, Ovens for curing, as shown in the photos, can vary in price depending on size, configuration, and optional features. At ROMER, we produce both standard models and fully customized solutions tailored to your process needs. Simply provide us with your part dimensions, line capacity, curing profile, and available floor space, and we will recommend the optimal setup and options that deliver real improvements in daily performance. Control and Monitoring - Real-time control of temperature, time, airflow, and operating modes—featuring alarms and recipe storage for repeatable cycles. Heating Module - Rapid heat-up and stable temperature using efficient heating elements for fast energy transfer. Air Circulation - Uniform airflow ensures minimized temperature variance and consistent coating quality. Hjdpfx Ahsfzb Rcensfh Insulation and Construction - Advanced chamber design reduces heat loss for quicker setpoint achievement and lower energy consumption. Safety and Certification - Equipped with sensors, interlocks, and protective logic to maximize operational safety and reliability. High Efficiency - Optimized heat transfer and minimized losses result in tangible energy savings. Automatic Start - Programmable scheduling enables automatic preheating before shifts, streamlining production startup. Self-Latching Doors & Intelligent Chimney - Prevents unintentional opening; chimney operates only when necessary for increased safety. ECO Mode - Low-consumption standby mode cuts energy use by up to 20%, depending on the process. Inspection Window and Lighting - Enables inspection without opening the door, reducing heat loss and simplifying supervision. Guide Rails & Automatic Heat Hood - Heat hood activates only during loading to avoid temperature drop; automated rail infeed enhances ergonomics and loading speed. Multi-Zone Heating - Independent zone control for precise curing of parts with varying mass and geometry. MTS System - Heating elements installed without thermal bridges for higher efficiency and faster heat-up times. 2-in-1 Split Chamber - Movable partition provides two independent zones—allowing drying and curing in a single unit, maximizing flexibility. VFD Ventilation - Variable fan speed control based on chamber conditions for improved accuracy and reduced power consumption.

Tahun pembuatan: 2020, Kondisi: baru, Transport systems Depending on the customer's requirements, transport systems can be either floor-based or suspended from rails. - For convenient solutions in manual installations, we recommend suspended cross-transfer systems (lateral transport). - In automated systems, chain conveyors are most commonly used. These systems operate continuously without stopping, making them an excellent solution for businesses focused on process quality and repeatability. - For companies manufacturing a variety of products simultaneously, such as those with multiple booths for different paint colors, flexible solutions using power-and-free conveyors are implemented. This is the most expensive option. All installations are custom-made according to customer requirements. Continuous suspended chain transport systems are designed and manufactured to the client’s specifications. Within this system, it is also possible to provide floor conveyor systems to transport items such as flowerpots or rims (see photo). ROMER also manufactures suspended transport systems. Cross-transfer units are engineered and built to meet the demands of specific installations. Photoelectric cell application The use of a photoelectric cell in the detail zone allows for measurement of the part’s length, enabling the automatic activation of spray guns when the part is within range and their immediate deactivation after coating. The photoelectric cell is supplied as standard equipment. Detailed recognition using special markers. Above the carrier there are plates with identification holes. In conjunction with the photoelectric cell, the PLC controller identifies coated workpieces, turning the spray guns on and off at the correct times—saving both energy and powder. Vertical shape detection. By using light barriers with horizontal sensors, the PLC controller can also analyze the vertical shape of a component. The PLC controller times the appearance of the part in the gun zone, allowing for selective activation or deactivation of spray guns. With multi-sensor horizontal and vertical light barriers, This solution enables precise measurement of workpiece dimensions, allowing for the control of manipulators as well. Hedofz Dt Njpfx Ahnofh

Tahun pembuatan: 2020, Kondisi: baru, Transport systems Depending on the customer's requirements, transport systems can be either floor-based or suspended from rails. - For convenient solutions in manual installations, we recommend suspended cross-transfer systems (lateral transport). - In automated systems, chain conveyors are most commonly used. These systems operate continuously without stopping, making them an excellent solution for businesses focused on process quality and repeatability. - For companies manufacturing a variety of products simultaneously, such as those with multiple booths for different paint colors, flexible solutions using power-and-free conveyors are implemented. This is the most expensive option. All installations are custom-made according to customer requirements. Continuous suspended chain transport systems are designed and manufactured to the client’s specifications. Within this system, it is also possible to provide floor conveyor systems to transport items such as flowerpots or rims (see photo). ROMER also manufactures suspended transport systems. Cross-transfer units are engineered and built to meet the demands of specific installations. Photoelectric cell application The use of a photoelectric cell in the detail zone allows for measurement of the part’s length, enabling the automatic activation of spray guns when the part is within range and their immediate deactivation after coating. The photoelectric cell is supplied as standard equipment. Detailed recognition using special markers. Above the carrier there are plates with identification holes. In conjunction with the photoelectric cell, the PLC controller identifies coated workpieces, turning the spray guns on and off at the correct times—saving both energy and powder. Vertical shape detection. By using light barriers with horizontal sensors, the PLC controller can also analyze the vertical shape of a component. The PLC controller times the appearance of the part in the gun zone, allowing for selective activation or deactivation of spray guns. With multi-sensor horizontal and vertical light barriers, This solution enables precise measurement of workpiece dimensions, allowing for the control of manipulators as well. Hodpfx Ahofz I D Dsnsfh

Tahun pembuatan: 2020, Kondisi: baru, Transport systems Depending on the customer's requirements, transport systems can be either floor-based or suspended from rails. - For convenient solutions in manual installations, we recommend suspended cross-transfer systems (lateral transport). - In automated systems, chain conveyors are most commonly used. These systems operate continuously without stopping, making them an excellent solution for businesses focused on process quality and repeatability. - For companies manufacturing a variety of products simultaneously, such as those with multiple booths for different paint colors, flexible solutions using power-and-free conveyors are implemented. This is the most expensive option. All installations are custom-made according to customer requirements. Continuous suspended chain transport systems are designed and manufactured to the client’s specifications. Within this system, it is also possible to provide floor conveyor systems to transport items such as flowerpots or rims (see photo). ROMER also manufactures suspended transport systems. Cross-transfer units are engineered and built to meet the demands of specific installations. Photoelectric cell application The use of a photoelectric cell in the detail zone allows for measurement of the part’s length, enabling the automatic activation of spray guns when the part is within range and their immediate deactivation after coating. The photoelectric cell is supplied as standard equipment. Detailed recognition using special markers. Hfjdpfofz I Edsx Ahneh Above the carrier there are plates with identification holes. In conjunction with the photoelectric cell, the PLC controller identifies coated workpieces, turning the spray guns on and off at the correct times—saving both energy and powder. Vertical shape detection. By using light barriers with horizontal sensors, the PLC controller can also analyze the vertical shape of a component. The PLC controller times the appearance of the part in the gun zone, allowing for selective activation or deactivation of spray guns. With multi-sensor horizontal and vertical light barriers, This solution enables precise measurement of workpiece dimensions, allowing for the control of manipulators as well.

Tahun pembuatan: 2020, Kondisi: baru, Touch delete ROMER cabins are equipped with 4-inch color touch lights. The cabin interface is intuitive and available in three operating modes: automatic (temporary), automatic (via plug-in filter cartridge), or manual. Filter Cartridge Sensor The cabins are equipped with a sensor that detects filter clogging and prompts cleaning. The system also notifies when the filters have already been used. Automatic Filter Cleaning The electronic system for automatic filter cleaning controls both the cleaning intervals and the burn-off timing. Each filter is cleaned individually, and filters can also be cleaned manually using presses. From experience, we know it can be difficult to rely on the operator to clean the filters. Thanks to this system, the operator no longer needs to intervene manually. Low Noise Level Aluminum fans are very quiet, operating within a range of 74-79 dB. Even with standard cabin design, it is difficult to hold a conversation due to the quiet operation. Boilers are separated from the cabin. Hanging “squirrel cage” design inside the cabin improves workflow, allowing painters to work without manual handling. Early booking of construction recommended. Hodpfx Ahofz I Ehsnjfh All remaining cabins are designed to prevent the rise of explosive mixtures during the painting process. Every subcomponent has been carefully selected to minimize this risk.

Tahun pembuatan: 2020, Kondisi: baru, Transport systems Depending on the customer's requirements, transport systems can be either floor-based or suspended from rails. - For convenient solutions in manual installations, we recommend suspended cross-transfer systems (lateral transport). - In automated systems, chain conveyors are most commonly used. These systems operate continuously without stopping, making them an excellent solution for businesses focused on process quality and repeatability. - For companies manufacturing a variety of products simultaneously, such as those with multiple booths for different paint colors, flexible solutions using power-and-free conveyors are implemented. This is the most expensive option. All installations are custom-made according to customer requirements. Continuous suspended chain transport systems are designed and manufactured to the client’s specifications. Within this system, it is also possible to provide floor conveyor systems to transport items such as flowerpots or rims (see photo). ROMER also manufactures suspended transport systems. Cross-transfer units are engineered and built to meet the demands of specific installations. Photoelectric cell application The use of a photoelectric cell in the detail zone allows for measurement of the part’s length, enabling the automatic activation of spray guns when the part is within range and their immediate deactivation after coating. The photoelectric cell is supplied as standard equipment. Detailed recognition using special markers. Above the carrier there are plates with identification holes. Hodpfx Ahsflmdwenefh In conjunction with the photoelectric cell, the PLC controller identifies coated workpieces, turning the spray guns on and off at the correct times—saving both energy and powder. Vertical shape detection. By using light barriers with horizontal sensors, the PLC controller can also analyze the vertical shape of a component. The PLC controller times the appearance of the part in the gun zone, allowing for selective activation or deactivation of spray guns. With multi-sensor horizontal and vertical light barriers, This solution enables precise measurement of workpiece dimensions, allowing for the control of manipulators as well.

Tahun pembuatan: 2025, Kondisi: baru, Ovens for curing, as shown in the photos, can vary in price depending on size, configuration, and optional features. At ROMER, we produce both standard models and fully customized solutions tailored to your process needs. Simply provide us with your part dimensions, line capacity, curing profile, and available floor space, and we will recommend the optimal setup and options that deliver real improvements in daily performance. Control and Monitoring - Real-time control of temperature, time, airflow, and operating modes—featuring alarms and recipe storage for repeatable cycles. Heating Module - Rapid heat-up and stable temperature using efficient heating elements for fast energy transfer. Air Circulation - Uniform airflow ensures minimized temperature variance and consistent coating quality. Insulation and Construction - Advanced chamber design reduces heat loss for quicker setpoint achievement and lower energy consumption. Safety and Certification - Equipped with sensors, interlocks, and protective logic to maximize operational safety and reliability. High Efficiency - Optimized heat transfer and minimized losses result in tangible energy savings. Automatic Start - Programmable scheduling enables automatic preheating before shifts, streamlining production startup. Self-Latching Doors & Intelligent Chimney - Prevents unintentional opening; chimney operates only when necessary for increased safety. ECO Mode - Low-consumption standby mode cuts energy use by up to 20%, depending on the process. Inspection Window and Lighting - Enables inspection without opening the door, reducing heat loss and simplifying supervision. Guide Rails & Automatic Heat Hood - Heat hood activates only during loading to avoid temperature drop; automated rail infeed enhances ergonomics and loading speed. Multi-Zone Heating - Independent zone control for precise curing of parts with varying mass and geometry. MTS System - Heating elements installed without thermal bridges for higher efficiency and faster heat-up times. 2-in-1 Split Chamber - Movable partition provides two independent zones—allowing drying and curing in a single unit, maximizing flexibility. VFD Ventilation - Variable fan speed control based on chamber conditions for improved accuracy and reduced power consumption. Hfodpfjfzccnjx Ahneh

Tahun pembuatan: 2020, Kondisi: baru, 7-inch Touch Panel The large color touch panel makes parameter input even easier and more convenient. 5 Programs with 50 Steps Each You can program up to 5 heating curves, each with a maximum of 50 steps. This feature is especially useful for complex processes. Information about Gas and Oil Consumption Hfjdpfxofzkrno Ahnjh Oil and gas consumption is calculated based on the burner settings. This function allows you to estimate fuel consumption and the overall operating costs. USB Memory Every firing process is logged, and the process data can be transferred to a USB stick for evaluation on a PC. Each file is automatically created and corresponds to a single firing process, recording peak temperatures and exact times. The file is saved in *.csv format (Excel spreadsheet). This option is free for all buyers until the end of 2016; with other manufacturers, this can cost several thousand euros. Storage of the Last 20 Firing Processes Problem with a batch? Not enough components coming out of the oven? Now you can review the precise parameters of the firing process—such as duration or potential issues. New! Timer Function You can set the start time so that the oven powers up automatically before the workday begins. Built by professionals for professionals. Automatic Exhaust System The exhaust system can be programmed to open a few minutes before the firing process ends, allowing the smoke to be removed from the chamber. The exhaust system can be controlled via the touch panel. Process Duration Timer Heating dynamics are used to calculate the process duration. The display shows when the firing process will end. Self-Closing Doors To open, simply pull the door. To close, just push gently—the door will close automatically. Exhaust Hood Above the Door (optional) To minimize heat loss in the production hall when opening the door, an exhaust hood above the door extracts hot air. Partition (optional) The partition is suitable for large ovens when you want to use only parts of the oven. The oven is equipped with a movable divider and special control system. 2-in-1 (optional) It's possible to use both chambers independently—for example, running the firing process in the first chamber while drying occurs in the second.

Tahun pembuatan: 2020, Kondisi: baru, Touch delete ROMER cabins are equipped with 4-inch color touch lights. The cabin interface is intuitive and available in three operating modes: automatic (temporary), automatic (via plug-in filter cartridge), or manual. Filter Cartridge Sensor The cabins are equipped with a sensor that detects filter clogging and prompts cleaning. The system also notifies when the filters have already been used. Hsdpfxjfz A Iwj Ahnsfh Automatic Filter Cleaning The electronic system for automatic filter cleaning controls both the cleaning intervals and the burn-off timing. Each filter is cleaned individually, and filters can also be cleaned manually using presses. From experience, we know it can be difficult to rely on the operator to clean the filters. Thanks to this system, the operator no longer needs to intervene manually. Low Noise Level Aluminum fans are very quiet, operating within a range of 74-79 dB. Even with standard cabin design, it is difficult to hold a conversation due to the quiet operation. Boilers are separated from the cabin. Hanging “squirrel cage” design inside the cabin improves workflow, allowing painters to work without manual handling. Early booking of construction recommended. All remaining cabins are designed to prevent the rise of explosive mixtures during the painting process. Every subcomponent has been carefully selected to minimize this risk.