Beli Peralatan Pelapis Serbuk bekas (24.267)

Kondisi: baru, Tahun pembuatan: 2025, Ovens for curing, as shown in the photos, can vary in price depending on size, configuration, and optional features. At ROMER, we produce both standard models and fully customized solutions tailored to your process needs. Simply provide us with your part dimensions, line capacity, curing profile, and available floor space, and we will recommend the optimal setup and options that deliver real improvements in daily performance. Control and Monitoring - Real-time control of temperature, time, airflow, and operating modes—featuring alarms and recipe storage for repeatable cycles. Heating Module - Rapid heat-up and stable temperature using efficient heating elements for fast energy transfer. Air Circulation - Uniform airflow ensures minimized temperature variance and consistent coating quality. Insulation and Construction - Advanced chamber design reduces heat loss for quicker setpoint achievement and lower energy consumption. Safety and Certification - Equipped with sensors, interlocks, and protective logic to maximize operational safety and reliability. High Efficiency - Optimized heat transfer and minimized losses result in tangible energy savings. Automatic Start - Programmable scheduling enables automatic preheating before shifts, streamlining production startup. Self-Latching Doors & Intelligent Chimney - Prevents unintentional opening; chimney operates only when necessary for increased safety. ECO Mode - Low-consumption standby mode cuts energy use by up to 20%, depending on the process. Inspection Window and Lighting Ijdpfx Aezduplokpoth - Enables inspection without opening the door, reducing heat loss and simplifying supervision. Guide Rails & Automatic Heat Hood - Heat hood activates only during loading to avoid temperature drop; automated rail infeed enhances ergonomics and loading speed. Multi-Zone Heating - Independent zone control for precise curing of parts with varying mass and geometry. MTS System - Heating elements installed without thermal bridges for higher efficiency and faster heat-up times. 2-in-1 Split Chamber - Movable partition provides two independent zones—allowing drying and curing in a single unit, maximizing flexibility. VFD Ventilation - Variable fan speed control based on chamber conditions for improved accuracy and reduced power consumption.

Kondisi: baru, Tahun pembuatan: 2025, Ovens for curing, as shown in the photos, can vary in price depending on size, configuration, and optional features. At ROMER, we produce both standard models and fully customized solutions tailored to your process needs. Simply provide us with your part dimensions, line capacity, curing profile, and available floor space, and we will recommend the optimal setup and options that deliver real improvements in daily performance. Control and Monitoring - Real-time control of temperature, time, airflow, and operating modes—featuring alarms and recipe storage for repeatable cycles. Heating Module - Rapid heat-up and stable temperature using efficient heating elements for fast energy transfer. Air Circulation - Uniform airflow ensures minimized temperature variance and consistent coating quality. Insulation and Construction - Advanced chamber design reduces heat loss for quicker setpoint achievement and lower energy consumption. Safety and Certification - Equipped with sensors, interlocks, and protective logic to maximize operational safety and reliability. Itsdpfx Aoyg H Erokpeh High Efficiency - Optimized heat transfer and minimized losses result in tangible energy savings. Automatic Start - Programmable scheduling enables automatic preheating before shifts, streamlining production startup. Self-Latching Doors & Intelligent Chimney - Prevents unintentional opening; chimney operates only when necessary for increased safety. ECO Mode - Low-consumption standby mode cuts energy use by up to 20%, depending on the process. Inspection Window and Lighting - Enables inspection without opening the door, reducing heat loss and simplifying supervision. Guide Rails & Automatic Heat Hood - Heat hood activates only during loading to avoid temperature drop; automated rail infeed enhances ergonomics and loading speed. Multi-Zone Heating - Independent zone control for precise curing of parts with varying mass and geometry. MTS System - Heating elements installed without thermal bridges for higher efficiency and faster heat-up times. 2-in-1 Split Chamber - Movable partition provides two independent zones—allowing drying and curing in a single unit, maximizing flexibility. VFD Ventilation - Variable fan speed control based on chamber conditions for improved accuracy and reduced power consumption.

Kondisi: baru, Tahun pembuatan: 2025, Ovens for curing, as shown in the photos, can vary in price depending on size, configuration, and optional features. At ROMER, we produce both standard models and fully customized solutions tailored to your process needs. Simply provide us with your part dimensions, line capacity, curing profile, and available floor space, and we will recommend the optimal setup and options that deliver real improvements in daily performance. Control and Monitoring - Real-time control of temperature, time, airflow, and operating modes—featuring alarms and recipe storage for repeatable cycles. Heating Module - Rapid heat-up and stable temperature using efficient heating elements for fast energy transfer. Air Circulation - Uniform airflow ensures minimized temperature variance and consistent coating quality. Insulation and Construction Iodpjfz U Nbsfx Akpsth - Advanced chamber design reduces heat loss for quicker setpoint achievement and lower energy consumption. Safety and Certification - Equipped with sensors, interlocks, and protective logic to maximize operational safety and reliability. High Efficiency - Optimized heat transfer and minimized losses result in tangible energy savings. Automatic Start - Programmable scheduling enables automatic preheating before shifts, streamlining production startup. Self-Latching Doors & Intelligent Chimney - Prevents unintentional opening; chimney operates only when necessary for increased safety. ECO Mode - Low-consumption standby mode cuts energy use by up to 20%, depending on the process. Inspection Window and Lighting - Enables inspection without opening the door, reducing heat loss and simplifying supervision. Guide Rails & Automatic Heat Hood - Heat hood activates only during loading to avoid temperature drop; automated rail infeed enhances ergonomics and loading speed. Multi-Zone Heating - Independent zone control for precise curing of parts with varying mass and geometry. MTS System - Heating elements installed without thermal bridges for higher efficiency and faster heat-up times. 2-in-1 Split Chamber - Movable partition provides two independent zones—allowing drying and curing in a single unit, maximizing flexibility. VFD Ventilation - Variable fan speed control based on chamber conditions for improved accuracy and reduced power consumption.

Kondisi: baru, Tahun pembuatan: 2025, Ovens for curing, as shown in the photos, can vary in price depending on size, configuration, and optional features. At ROMER, we produce both standard models and fully customized solutions tailored to your process needs. Simply provide us with your part dimensions, line capacity, curing profile, and available floor space, and we will recommend the optimal setup and options that deliver real improvements in daily performance. Control and Monitoring - Real-time control of temperature, time, airflow, and operating modes—featuring alarms and recipe storage for repeatable cycles. Heating Module - Rapid heat-up and stable temperature using efficient heating elements for fast energy transfer. Air Circulation - Uniform airflow ensures minimized temperature variance and consistent coating quality. Insulation and Construction - Advanced chamber design reduces heat loss for quicker setpoint achievement and lower energy consumption. Safety and Certification - Equipped with sensors, interlocks, and protective logic to maximize operational safety and reliability. High Efficiency - Optimized heat transfer and minimized losses result in tangible energy savings. Automatic Start - Programmable scheduling enables automatic preheating before shifts, streamlining production startup. Self-Latching Doors & Intelligent Chimney - Prevents unintentional opening; chimney operates only when necessary for increased safety. ECO Mode - Low-consumption standby mode cuts energy use by up to 20%, depending on the process. Inspection Window and Lighting - Enables inspection without opening the door, reducing heat loss and simplifying supervision. Guide Rails & Automatic Heat Hood - Heat hood activates only during loading to avoid temperature drop; automated rail infeed enhances ergonomics and loading speed. Multi-Zone Heating - Independent zone control for precise curing of parts with varying mass and geometry. Isdpfoflk Awsx Akpoth MTS System - Heating elements installed without thermal bridges for higher efficiency and faster heat-up times. 2-in-1 Split Chamber - Movable partition provides two independent zones—allowing drying and curing in a single unit, maximizing flexibility. VFD Ventilation - Variable fan speed control based on chamber conditions for improved accuracy and reduced power consumption.

Tahun pembuatan: 2020, Kondisi: baru, Transport systems Ijdpjfz U S Eofx Akpjth Depending on the customer's requirements, transport systems can be either floor-based or suspended from rails. - For convenient solutions in manual installations, we recommend suspended cross-transfer systems (lateral transport). - In automated systems, chain conveyors are most commonly used. These systems operate continuously without stopping, making them an excellent solution for businesses focused on process quality and repeatability. - For companies manufacturing a variety of products simultaneously, such as those with multiple booths for different paint colors, flexible solutions using power-and-free conveyors are implemented. This is the most expensive option. All installations are custom-made according to customer requirements. Continuous suspended chain transport systems are designed and manufactured to the client’s specifications. Within this system, it is also possible to provide floor conveyor systems to transport items such as flowerpots or rims (see photo). ROMER also manufactures suspended transport systems. Cross-transfer units are engineered and built to meet the demands of specific installations. Photoelectric cell application The use of a photoelectric cell in the detail zone allows for measurement of the part’s length, enabling the automatic activation of spray guns when the part is within range and their immediate deactivation after coating. The photoelectric cell is supplied as standard equipment. Detailed recognition using special markers. Above the carrier there are plates with identification holes. In conjunction with the photoelectric cell, the PLC controller identifies coated workpieces, turning the spray guns on and off at the correct times—saving both energy and powder. Vertical shape detection. By using light barriers with horizontal sensors, the PLC controller can also analyze the vertical shape of a component. The PLC controller times the appearance of the part in the gun zone, allowing for selective activation or deactivation of spray guns. With multi-sensor horizontal and vertical light barriers, This solution enables precise measurement of workpiece dimensions, allowing for the control of manipulators as well.

Kondisi: baru, Tahun pembuatan: 2025, Ovens for curing, as shown in the photos, can vary in price depending on size, configuration, and optional features. At ROMER, we produce both standard models and fully customized solutions tailored to your process needs. Simply provide us with your part dimensions, line capacity, curing profile, and available floor space, and we will recommend the optimal setup and options that deliver real improvements in daily performance. Itodpjyg H Dhsfx Akpeh Control and Monitoring - Real-time control of temperature, time, airflow, and operating modes—featuring alarms and recipe storage for repeatable cycles. Heating Module - Rapid heat-up and stable temperature using efficient heating elements for fast energy transfer. Air Circulation - Uniform airflow ensures minimized temperature variance and consistent coating quality. Insulation and Construction - Advanced chamber design reduces heat loss for quicker setpoint achievement and lower energy consumption. Safety and Certification - Equipped with sensors, interlocks, and protective logic to maximize operational safety and reliability. High Efficiency - Optimized heat transfer and minimized losses result in tangible energy savings. Automatic Start - Programmable scheduling enables automatic preheating before shifts, streamlining production startup. Self-Latching Doors & Intelligent Chimney - Prevents unintentional opening; chimney operates only when necessary for increased safety. ECO Mode - Low-consumption standby mode cuts energy use by up to 20%, depending on the process. Inspection Window and Lighting - Enables inspection without opening the door, reducing heat loss and simplifying supervision. Guide Rails & Automatic Heat Hood - Heat hood activates only during loading to avoid temperature drop; automated rail infeed enhances ergonomics and loading speed. Multi-Zone Heating - Independent zone control for precise curing of parts with varying mass and geometry. MTS System - Heating elements installed without thermal bridges for higher efficiency and faster heat-up times. 2-in-1 Split Chamber - Movable partition provides two independent zones—allowing drying and curing in a single unit, maximizing flexibility. VFD Ventilation - Variable fan speed control based on chamber conditions for improved accuracy and reduced power consumption.

Kondisi: baru, Tahun pembuatan: 2025, de Itedsvv N Tyjpfx Akpjh

Tahun pembuatan: 2020, Kondisi: baru, Transport systems Iedpofz Dubsfx Akpjth Depending on the customer's requirements, transport systems can be either floor-based or suspended from rails. - For convenient solutions in manual installations, we recommend suspended cross-transfer systems (lateral transport). - In automated systems, chain conveyors are most commonly used. These systems operate continuously without stopping, making them an excellent solution for businesses focused on process quality and repeatability. - For companies manufacturing a variety of products simultaneously, such as those with multiple booths for different paint colors, flexible solutions using power-and-free conveyors are implemented. This is the most expensive option. All installations are custom-made according to customer requirements. Continuous suspended chain transport systems are designed and manufactured to the client’s specifications. Within this system, it is also possible to provide floor conveyor systems to transport items such as flowerpots or rims (see photo). ROMER also manufactures suspended transport systems. Cross-transfer units are engineered and built to meet the demands of specific installations. Photoelectric cell application The use of a photoelectric cell in the detail zone allows for measurement of the part’s length, enabling the automatic activation of spray guns when the part is within range and their immediate deactivation after coating. The photoelectric cell is supplied as standard equipment. Detailed recognition using special markers. Above the carrier there are plates with identification holes. In conjunction with the photoelectric cell, the PLC controller identifies coated workpieces, turning the spray guns on and off at the correct times—saving both energy and powder. Vertical shape detection. By using light barriers with horizontal sensors, the PLC controller can also analyze the vertical shape of a component. The PLC controller times the appearance of the part in the gun zone, allowing for selective activation or deactivation of spray guns. With multi-sensor horizontal and vertical light barriers, This solution enables precise measurement of workpiece dimensions, allowing for the control of manipulators as well.

Tahun pembuatan: 2020, Kondisi: baru, 7-inch Touch Panel The large color touch panel makes parameter input even easier and more convenient. 5 Programs with 50 Steps Each You can program up to 5 heating curves, each with a maximum of 50 steps. This feature is especially useful for complex processes. Information about Gas and Oil Consumption Oil and gas consumption is calculated based on the burner settings. This function allows you to estimate fuel consumption and the overall operating costs. USB Memory Every firing process is logged, and the process data can be transferred to a USB stick for evaluation on a PC. Each file is automatically created and corresponds to a single firing process, recording peak temperatures and exact times. The file is saved in *.csv format (Excel spreadsheet). This option is free for all buyers until the end of 2016; with other manufacturers, this can cost several thousand euros. Storage of the Last 20 Firing Processes Problem with a batch? Not enough components coming out of the oven? Now you can review the precise parameters of the firing process—such as duration or potential issues. New! Timer Function You can set the start time so that the oven powers up automatically before the workday begins. Built by professionals for professionals. Automatic Exhaust System The exhaust system can be programmed to open a few minutes before the firing process ends, allowing the smoke to be removed from the chamber. The exhaust system can be controlled via the touch panel. Iodpfx Akjfz Apqjpjth Process Duration Timer Heating dynamics are used to calculate the process duration. The display shows when the firing process will end. Self-Closing Doors To open, simply pull the door. To close, just push gently—the door will close automatically. Exhaust Hood Above the Door (optional) To minimize heat loss in the production hall when opening the door, an exhaust hood above the door extracts hot air. Partition (optional) The partition is suitable for large ovens when you want to use only parts of the oven. The oven is equipped with a movable divider and special control system. 2-in-1 (optional) It's possible to use both chambers independently—for example, running the firing process in the first chamber while drying occurs in the second.

Tahun pembuatan: 2020, Kondisi: baru, Transport systems Iodpfx Asfz Dt Nokpjth Depending on the customer's requirements, transport systems can be either floor-based or suspended from rails. - For convenient solutions in manual installations, we recommend suspended cross-transfer systems (lateral transport). - In automated systems, chain conveyors are most commonly used. These systems operate continuously without stopping, making them an excellent solution for businesses focused on process quality and repeatability. - For companies manufacturing a variety of products simultaneously, such as those with multiple booths for different paint colors, flexible solutions using power-and-free conveyors are implemented. This is the most expensive option. All installations are custom-made according to customer requirements. Continuous suspended chain transport systems are designed and manufactured to the client’s specifications. Within this system, it is also possible to provide floor conveyor systems to transport items such as flowerpots or rims (see photo). ROMER also manufactures suspended transport systems. Cross-transfer units are engineered and built to meet the demands of specific installations. Photoelectric cell application The use of a photoelectric cell in the detail zone allows for measurement of the part’s length, enabling the automatic activation of spray guns when the part is within range and their immediate deactivation after coating. The photoelectric cell is supplied as standard equipment. Detailed recognition using special markers. Above the carrier there are plates with identification holes. In conjunction with the photoelectric cell, the PLC controller identifies coated workpieces, turning the spray guns on and off at the correct times—saving both energy and powder. Vertical shape detection. By using light barriers with horizontal sensors, the PLC controller can also analyze the vertical shape of a component. The PLC controller times the appearance of the part in the gun zone, allowing for selective activation or deactivation of spray guns. With multi-sensor horizontal and vertical light barriers, This solution enables precise measurement of workpiece dimensions, allowing for the control of manipulators as well.

Tahun pembuatan: 2020, Kondisi: baru, Transport systems Depending on the customer's requirements, transport systems can be either floor-based or suspended from rails. - For convenient solutions in manual installations, we recommend suspended cross-transfer systems (lateral transport). - In automated systems, chain conveyors are most commonly used. These systems operate continuously without stopping, making them an excellent solution for businesses focused on process quality and repeatability. - For companies manufacturing a variety of products simultaneously, such as those with multiple booths for different paint colors, flexible solutions using power-and-free conveyors are implemented. This is the most expensive option. All installations are custom-made according to customer requirements. Continuous suspended chain transport systems are designed and manufactured to the client’s specifications. Within this system, it is also possible to provide floor conveyor systems to transport items such as flowerpots or rims (see photo). ROMER also manufactures suspended transport systems. Cross-transfer units are engineered and built to meet the demands of specific installations. Photoelectric cell application The use of a photoelectric cell in the detail zone allows for measurement of the part’s length, enabling the automatic activation of spray guns when the part is within range and their immediate deactivation after coating. The photoelectric cell is supplied as standard equipment. Detailed recognition using special markers. Above the carrier there are plates with identification holes. In conjunction with the photoelectric cell, the PLC controller identifies coated workpieces, turning the spray guns on and off at the correct times—saving both energy and powder. Vertical shape detection. By using light barriers with horizontal sensors, the PLC controller can also analyze the vertical shape of a component. The PLC controller times the appearance of the part in the gun zone, allowing for selective activation or deactivation of spray guns. With multi-sensor horizontal and vertical light barriers, Itodpfxsfz I D Dj Akpsh This solution enables precise measurement of workpiece dimensions, allowing for the control of manipulators as well.

Tahun pembuatan: 2020, Kondisi: baru, Transport systems Depending on the customer's requirements, transport systems can be either floor-based or suspended from rails. Iodpofz I Edofx Akpeth - For convenient solutions in manual installations, we recommend suspended cross-transfer systems (lateral transport). - In automated systems, chain conveyors are most commonly used. These systems operate continuously without stopping, making them an excellent solution for businesses focused on process quality and repeatability. - For companies manufacturing a variety of products simultaneously, such as those with multiple booths for different paint colors, flexible solutions using power-and-free conveyors are implemented. This is the most expensive option. All installations are custom-made according to customer requirements. Continuous suspended chain transport systems are designed and manufactured to the client’s specifications. Within this system, it is also possible to provide floor conveyor systems to transport items such as flowerpots or rims (see photo). ROMER also manufactures suspended transport systems. Cross-transfer units are engineered and built to meet the demands of specific installations. Photoelectric cell application The use of a photoelectric cell in the detail zone allows for measurement of the part’s length, enabling the automatic activation of spray guns when the part is within range and their immediate deactivation after coating. The photoelectric cell is supplied as standard equipment. Detailed recognition using special markers. Above the carrier there are plates with identification holes. In conjunction with the photoelectric cell, the PLC controller identifies coated workpieces, turning the spray guns on and off at the correct times—saving both energy and powder. Vertical shape detection. By using light barriers with horizontal sensors, the PLC controller can also analyze the vertical shape of a component. The PLC controller times the appearance of the part in the gun zone, allowing for selective activation or deactivation of spray guns. With multi-sensor horizontal and vertical light barriers, This solution enables precise measurement of workpiece dimensions, allowing for the control of manipulators as well.

Tahun pembuatan: 2020, Kondisi: baru, Transport systems Depending on the customer's requirements, transport systems can be either floor-based or suspended from rails. - For convenient solutions in manual installations, we recommend suspended cross-transfer systems (lateral transport). - In automated systems, chain conveyors are most commonly used. These systems operate continuously without stopping, making them an excellent solution for businesses focused on process quality and repeatability. - For companies manufacturing a variety of products simultaneously, such as those with multiple booths for different paint colors, flexible solutions using power-and-free conveyors are implemented. This is the most expensive option. All installations are custom-made according to customer requirements. Continuous suspended chain transport systems are designed and manufactured to the client’s specifications. Within this system, it is also possible to provide floor conveyor systems to transport items such as flowerpots or rims (see photo). ROMER also manufactures suspended transport systems. Iedpfxeflmdwe Akpoth Cross-transfer units are engineered and built to meet the demands of specific installations. Photoelectric cell application The use of a photoelectric cell in the detail zone allows for measurement of the part’s length, enabling the automatic activation of spray guns when the part is within range and their immediate deactivation after coating. The photoelectric cell is supplied as standard equipment. Detailed recognition using special markers. Above the carrier there are plates with identification holes. In conjunction with the photoelectric cell, the PLC controller identifies coated workpieces, turning the spray guns on and off at the correct times—saving both energy and powder. Vertical shape detection. By using light barriers with horizontal sensors, the PLC controller can also analyze the vertical shape of a component. The PLC controller times the appearance of the part in the gun zone, allowing for selective activation or deactivation of spray guns. With multi-sensor horizontal and vertical light barriers, This solution enables precise measurement of workpiece dimensions, allowing for the control of manipulators as well.

Tahun pembuatan: 2020, Kondisi: baru, 7-inch Touch Panel The large color touch panel makes parameter input even easier and more convenient. 5 Programs with 50 Steps Each You can program up to 5 heating curves, each with a maximum of 50 steps. This feature is especially useful for complex processes. Information about Gas and Oil Consumption Oil and gas consumption is calculated based on the burner settings. This function allows you to estimate fuel consumption and the overall operating costs. USB Memory Every firing process is logged, and the process data can be transferred to a USB stick for evaluation on a PC. Iedpjfzkrnsfx Akpoth Each file is automatically created and corresponds to a single firing process, recording peak temperatures and exact times. The file is saved in *.csv format (Excel spreadsheet). This option is free for all buyers until the end of 2016; with other manufacturers, this can cost several thousand euros. Storage of the Last 20 Firing Processes Problem with a batch? Not enough components coming out of the oven? Now you can review the precise parameters of the firing process—such as duration or potential issues. New! Timer Function You can set the start time so that the oven powers up automatically before the workday begins. Built by professionals for professionals. Automatic Exhaust System The exhaust system can be programmed to open a few minutes before the firing process ends, allowing the smoke to be removed from the chamber. The exhaust system can be controlled via the touch panel. Process Duration Timer Heating dynamics are used to calculate the process duration. The display shows when the firing process will end. Self-Closing Doors To open, simply pull the door. To close, just push gently—the door will close automatically. Exhaust Hood Above the Door (optional) To minimize heat loss in the production hall when opening the door, an exhaust hood above the door extracts hot air. Partition (optional) The partition is suitable for large ovens when you want to use only parts of the oven. The oven is equipped with a movable divider and special control system. 2-in-1 (optional) It's possible to use both chambers independently—for example, running the firing process in the first chamber while drying occurs in the second.

Tahun pembuatan: 2020, Kondisi: baru, Transport systems Depending on the customer's requirements, transport systems can be either floor-based or suspended from rails. - For convenient solutions in manual installations, we recommend suspended cross-transfer systems (lateral transport). - In automated systems, chain conveyors are most commonly used. These systems operate continuously without stopping, making them an excellent solution for businesses focused on process quality and repeatability. - For companies manufacturing a variety of products simultaneously, such as those with multiple booths for different paint colors, flexible solutions using power-and-free conveyors are implemented. This is the most expensive option. All installations are custom-made according to customer requirements. Continuous suspended chain transport systems are designed and manufactured to the client’s specifications. Within this system, it is also possible to provide floor conveyor systems to transport items such as flowerpots or rims (see photo). ROMER also manufactures suspended transport systems. Cross-transfer units are engineered and built to meet the demands of specific installations. Photoelectric cell application The use of a photoelectric cell in the detail zone allows for measurement of the part’s length, enabling the automatic activation of spray guns when the part is within range and their immediate deactivation after coating. The photoelectric cell is supplied as standard equipment. Detailed recognition using special markers. Above the carrier there are plates with identification holes. Itjdpfx Aefz Nb Tekpeh In conjunction with the photoelectric cell, the PLC controller identifies coated workpieces, turning the spray guns on and off at the correct times—saving both energy and powder. Vertical shape detection. By using light barriers with horizontal sensors, the PLC controller can also analyze the vertical shape of a component. The PLC controller times the appearance of the part in the gun zone, allowing for selective activation or deactivation of spray guns. With multi-sensor horizontal and vertical light barriers, This solution enables precise measurement of workpiece dimensions, allowing for the control of manipulators as well.

Tahun pembuatan: 2020, Kondisi: baru, 7-inch Touch Panel The large color touch panel makes parameter input even easier and more convenient. 5 Programs with 50 Steps Each You can program up to 5 heating curves, each with a maximum of 50 steps. This feature is especially useful for complex processes. Information about Gas and Oil Consumption Oil and gas consumption is calculated based on the burner settings. This function allows you to estimate fuel consumption and the overall operating costs. USB Memory Every firing process is logged, and the process data can be transferred to a USB stick for evaluation on a PC. Each file is automatically created and corresponds to a single firing process, recording peak temperatures and exact times. The file is saved in *.csv format (Excel spreadsheet). This option is free for all buyers until the end of 2016; with other manufacturers, this can cost several thousand euros. Storage of the Last 20 Firing Processes Problem with a batch? Not enough components coming out of the oven? Now you can review the precise parameters of the firing process—such as duration or potential issues. New! Timer Function You can set the start time so that the oven powers up automatically before the workday begins. Built by professionals for professionals. Automatic Exhaust System The exhaust system can be programmed to open a few minutes before the firing process ends, allowing the smoke to be removed from the chamber. The exhaust system can be controlled via the touch panel. Process Duration Timer Heating dynamics are used to calculate the process duration. The display shows when the firing process will end. Ijdjfz U Tiopfx Akpjth Self-Closing Doors To open, simply pull the door. To close, just push gently—the door will close automatically. Exhaust Hood Above the Door (optional) To minimize heat loss in the production hall when opening the door, an exhaust hood above the door extracts hot air. Partition (optional) The partition is suitable for large ovens when you want to use only parts of the oven. The oven is equipped with a movable divider and special control system. 2-in-1 (optional) It's possible to use both chambers independently—for example, running the firing process in the first chamber while drying occurs in the second.

Tahun pembuatan: 2014, Kondisi: bekas, Gebrauchte Pulverbeschichtungsanlage. Außer Betrieb genommen in 2024. Itjdpfx Akevxrm Uspsh - Container-Mischer Mixaco, Typ CM1000-MT, mit 4 x Edelstahl-Behälter, 800 Ltr, Baujahr 2014 - Extruder Coperion, ZSK 43 MV, Baujahr 2014 - SBS Kühlförderband, 800 mm breit x 5.000 mm lang - Mühle Hosokawa Alpine, Typ ACM40 EC CL, Baujahr 2014 - Dosiergerät Gericke, Typ GL D 7, Baujahr 2014 - Zuführeinheit Hosokawa, Baujahr 2014 - Druckfilter Hosokawa Alpine, Baujahr 2014 - Edelstahlyklon, Durchmesser: 500 mm - 2x Rotationssieb AZO, Typ E 240 - Taschenfilter mit 45 kW Elektroantrieb - Kältemaschine Climaveneta, Typ NX/K 0914P - Kältemaschine Climaveneta, Typ NX/K 0552P

Kondisi: baru, Tahun pembuatan: 2026, Fungsionalitas: berfungsi sepenuhnya, masa garansi: 24 bulan, daya: 38 kW (51,67 hp), tegangan masuk: 380 V, suhu: 250 °C, kapasitas pemanasan: 36 kW (48,95 hp), panjang dalam: 2.400 mm, lebar dalam: 1.500 mm, tinggi dalam: 1.800 mm, laju aliran volumetrik: 3.500 m³/jam, en Itjdpfjwc Ep Aex Akpjh

Kondisi: hampir baru (bekas), Fungsionalitas: berfungsi sepenuhnya, Peralatan pelapis (breading) Koppens PR 200 dengan sekrup pengumpan dan blower. Iodsykuc Hspfx Akpsth Kondisi seperti baru!

Kondisi: baru, Tahun pembuatan: 2025, jenis arus masuk: tiga fasa, berat keseluruhan: 450 kg, tinggi total: 2.500 mm, lebar total: 4.200 mm, Perlengkapan: pencahayaan, BUMEX SP. Z O.O. presents a powder coating booth. Working dimensions: 4,000 x 2,200 mm 5 x filters Automatic filter cleaning with adjustable interval from 10–1,200 seconds. Fan: 2 x 2.2 kW, 9,500 m³/h = 19,000 m³/h 2 x LED lamp Delivery time: 14–21 days Our booths are distinguished by their exceptional build quality, operational safety, and parameter customization to match your facility. We provide expert consultation on the selection of paint booths, dedusting systems, extraction units, and industrial heat recovery solutions. CHOOSE BUMEX SP. Z O.O. - Highest quality machinery on the market - Professional advice and support - Warranty included - In- and out-of-warranty service - Complete technical documentation - 100% customer satisfaction - All BUMEX SP. Z O.O. products are WE-certified We offer our own transport services—pricing is determined per individual offer. Invoices are issued with VAT shown separately. E.g. - Short lead times! - Ability to order machines in various, customized configurations and dimensions! Iodpshfwy Hefx Akpsth Please do not hesitate to contact us.

Kondisi: baru, Tahun pembuatan: 2025, GARIS COATING POWDER HORIZONTAL UNTUK PROFIL ALUMINIUM Kami menambah nilai pada produksi Anda. * Kecepatan konveyor disesuaikan dengan kapasitas harian Anda Konveyor udara – tipe monorel atau power & free Booth pengecatan powder otomatis, struktur antistatik logam atau PVC Peralatan pengecatan powder otomatis dengan sistem reciprocating Oven polimerisasi tipe terowongan – pemanas gas, diesel, atau listrik Dibuat di Türkiye Tanda CE Kami menawarkan solusi teknis terbaik dan harga kompetitif * Kantor di Prancis dan Jerman, Iodpfx Akovv Nh Repsth Hubungi kami untuk informasi lebih lanjut dan penawaran harga

Kondisi: baru, Tahun pembuatan: 2025, PABRIK DAN SISTEM PELAPISAN SERBUK MANUAL Departemen desain kami akan memberikan solusi jalur pelapisan serbuk khusus terbaik yang sesuai dengan kebutuhan kapasitas produk Anda. Buatan Türkiye Tanda CE Ijdpfx Aevv Nuqekpeth Kami menawarkan solusi teknis terbaik dan harga yang kompetitif * Kantor di Prancis dan Jerman, Hubungi kami untuk informasi lebih lanjut dan penawaran harga

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2024, tinggi benda kerja (maks.): 60 mm, kecepatan pemakanan sumbu X: 10 m/menit, kecepatan spindel (maks.): 16.000 rpm, jenis kontrol: Dikendalikan oleh PLC, The machine has already been dismantled and stored by a qualified technician. TECHNICAL DETAILS Crosscut saw station speed: approx. 16,000 rpm Milling station speed: approx. 16,000 rpm Max. milling depth: 3 mm Designed for edge thickness: 1 mm Hot-melt adhesive specification for edge material max.: 3 mm Feed speed: approx. 10 m/min Max. workpiece thickness: 60 mm EQUIPMENT Maintenance-free coated glue pot with preparation for quick-change pots Glue discharge device Pneumatic milling adjustment Combination version with indexable insert cutter Corner rounding unit Radius scraper Flat scraper with pneumatic lift device Buffing station Robust chain drive Ball bearing double roller upper pressure Aggregate viewing windows on machine rear and operator side Signal lamp for workpiece sequence Itsdpfx Akszb Idfepsh Extendable workpiece support ACCESSORIES Hebrock 8 mm version Hebrock quick-change system for corner milling unit Hebrock jointing up to 60 mm workpiece thickness Hebrock edge protection spray Hebrock nesting (milling unit + radius scraper) Hebrock Airtronic Note: Accessories not guaranteed. Applies: "Item purchased as seen." Prospective buyers must check the completeness of the item on site.

Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, daya: 300 kW (407,89 hp), berat keseluruhan: 65.000 kg, ukuran ban: 6*2, kondisi ban: 100 persen, kondisi penggerak: 100 persen, kondisi rantai: 100 persen, konfigurasi gandar: 3 gandar, kelas emisi: Euro 3, Tahun pembuatan: 2026, nomor mesin/kendaraan: V9638J96, Perlengkapan: hidrolik, komputer bawaan, penggerak semua roda, Sand- und Kiesaufbereitungsanlage | MINGYUAN Schwerindustrieausrüstung Eine Sand- und Kiesaufbereitungsanlage ist ein integriertes System zur Herstellung hochwertiger Baustoffe wie Sand, Kies, Splitt und künstlichem Sand. MINGYUAN bietet komplette Lösungen für das Brechen und Sieben von Zuschlagstoffen für Steinbrüche, den Bergbau, den Bau sowie Infrastrukturprojekte und gewährleistet dabei eine effiziente Materialaufbereitung und gleichbleibende Produktionsleistung. Allgemeine Beschreibung Die Sand- und Kiesproduktionslinie von MINGYUAN kombiniert fortschrittliche Brech-, Sieb-, Wasch- und Fördertechnik, um Rohmaterialien wie Kalkstein, Granit, Basalt, Flusskies und Quarz zu Baustoffsanden und Kies unterschiedlicher Körnung zu verarbeiten. Die Anlage umfasst in der Regel Backenbrecher, Prallbrecher, Kegelbrecher, Vibrationssiebe, Sandwaschanlagen, Bandförderer und Entstaubungsanlagen und bildet so ein vollständiges, automatisiertes Produktionssystem. Anwendung findet sie im Straßenbau, in Betonmischwerken, im Baustoffsektor und in Wasserkraftprojekten. Leistungsspektrum: 30–1.000 Tonnen pro Stunde (kundenspezifisch anpassbar) Aufgabekörnung: ≤800 mm (abhängig vom Brechertyp) Endkörnungen: 0–5 mm (Sand), 5–10 mm, 10–20 mm, 20–40 mm (Kies) Hauptausstattung: Backenbrecher (PE/PEX-Serie), Kegelbrecher, Prallbrecher, VSI-Sandhersteller, Vibrationsförderer, Vibrationssieb, Sandwaschanlage, Bandförderer, Steuerungssystem Energieversorgung: Elektrisch oder dieselbetrieben wählbar Automatisierung: PLC-Steuerung mit Echtzeitüberwachung und einstellbarer Kornverteilung Die MINGYUAN Heavy Industrial Equipment Co., Ltd. bietet komplette Lösungen für Sand- und Kiesaufbereitung mit zuverlässiger Leistung, wettbewerbsfähigen Preisen und professionellem After-Sales-Service für Kunden weltweit in der Bergbau-, Bau- und Zementindustrie. 2. Brechen und Sieben: - Die gewonnenen Rohstoffe müssen häufig gebrochen und gesiebt werden, um die Teilchengröße zu verringern und nach Korngrößen zu sortieren. - Brecher zerkleinern größere Gesteinsbrocken, und Siebe trennen das Material nach Korngröße. 3. Waschen: - Durch das Waschen werden Verunreinigungen wie Ton, Schluff und Staub aus den Rohstoffen entfernt. Dies ist besonders bei Zuschlagstoffen für den Bau wichtig. 4. Klassieren und Sortieren: - Nach der Wäsche werden die Materialien häufig klassiert und sortiert, um sie nach Kornfraktionen und Qualitätsstufen separieren zu können. 5. Lagerung und Haldenbildung: - Aufbereitete Materialien werden in Halden zwischengelagert. Geeignete Lagermöglichkeiten sind notwendig, um verschiedene Körnungen zu managen. 6. Förderung und Transport: - Förderbandsysteme transportieren die Materialien zwischen den verschiedenen Verfahrensstufen. Den Abtransport zur Verteilung übernehmen Lkw oder Förderbänder. Isdpfx Asq Nia Iskpjth Schlagworte Sandproduktionslinie, Kiesaufbereitungsanlage, Zuschlagstoff-Brecheranlage, Steinbrecher, Sandherstellungsmaschine, Sandwaschanlage, Vibrationssieb, Backenbrecher, Kegelbrecher, Prallbrecher, VSI-Brecher, Steinbruchausrüstung, Bergbaumaschinen, Baustoffzuschlagstoffe, künstlicher Sand, Splitt, Flusskies, Kalksteinbrecher, Basaltbrecher, Granitbrecher, Sandwaschanlage, Siebanlage, Fördersystem, MINGYUAN Sandanlage, Aufbereitungsmaschinen für Zuschlagstoffe, Steinbrechlinie, Sand- und Kieswaschanlage, Hochleistungsbrecher, Umweltfreundliche Sandanlage, Hersteller von Zuschlagstoffproduktionsanlagen.

Kondisi: baru, daya: 75 kW (101,97 hp), Tahun pembuatan: 2026, de Isdpfeq I N Iqex Akpsth