Beli Renner Reko H 510/150 bekas (61.875)

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2024, jam operasional: 2 h, tekanan (maks.): 14 batang, REKO H 510/150 Piston Compressor 14 bar including operating hours counter including 150 litre compressed air tank Operating hours: 2.0 h Year of manufacture: 2024 Maximum pressure: 14 bar Free air delivery at 12 bar: 360 l/min Rated power: 3.0 kW Mains voltage: 400 V Compressor speed: 1200 rpm Compressed air tank: 150 litres Dimensions: 1345 x 457 x 1054 mm Cgjdpfx Acjvr Eicopsu Weight: 115 kg We always have a large selection of new and used compressors in stock!

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2025, jam operasional: 2 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 002331512500001478, tekanan (maks.): 14 batang, gebrauchter-reko-h-710-150-kolbenkompressor-14-bar Cgjdpfx Aceypm Sdepou

Tahun pembuatan: 2022, Kondisi: seperti baru (mesin pameran), REKO 510-B auxiliary compressor (piston compressor) Including operating hours counter Including 3-liter compressed air tank Operating hours: 0.75 h Year of manufacture: 2022 Cgsdpfspyhpdjx Acpju Maximum pressure: 10 bar Free air delivery: 380 l/min Rated power: 3.0 kW Mains voltage: 400 V Compressor speed: 1200 rpm Compressed air tank: 3 liters Dimensions: 735 x 620 x 698 mm Weight: 45 kg We always have a wide selection of new and used compressors in stock!

Kondisi: sangat baik (bekas), Tahun pembuatan: 1998,

Kondisi: hampir baru (bekas), Tahun pembuatan: 2020, Fungsionalitas: berfungsi sepenuhnya, jenis arus masuk: tiga fasa, Kaltzuführungs-Gummivakuumextruder 150mm 20d Baujahr: 2020 Zustand: neuwertig Ausstattungstyp: E150-01-00 Schneckendurchmesser: 150 mm Schneckendrehzahl: 1–50 U/min Maximale Ausstoßleistung: ca. 1000 kg/h Temperaturregelsystem: Anzahl/Leistung der Heizzonen: 7 Zonen × 6 kW Anwendung: Gummiextrusion, Mischung und Plastifizierung; Austrag von Produkten definierter Größe gemäß Werkzeugkopf Außenmaße: 4200 × 1600 × 1500 mm (L × B × H) Extrusionssystem: Beschickungsart: Seitenwalzenantrieb, aktives Fördern durch die Schnecke Beschickungsaufbau: Zuführwalzengetriebe und Schneckengetriebe mit automatischem Schmiersystem Schneckenmaterial: 38GrMoAlA Schneckenhärte: HRC65–68 Härtung des Zylinders/Innenbuchse: HRC65–70 Nitrierhärtetiefe: 0,4–0,7 mm Schneckenaufbau: Mit Entgasungsnut, hervorragende Leistung Druckregelung: Mit Drucksensor, Druckschutzwert 0–35 MPa einstellbar, zusätzlich Temperatursensor L/D-Verhältnis: 20:1 Kühlsektion: 1 Sektion (Seitenwalzen) Vakuumpumpenleistung: 2,2 kW Temperaturregelung: Automatisch, Kühlung über elektromagnetisches Ventil Umlaufpumpenfabrikat: Weile Kühlwasserdruck: 0,15–2 kg/cm² Temperaturregelgenauigkeit: ±1°C Verbindung von Schnecke und Getriebe: Evolventenverzahnung Antrieb von Motor und Getriebe: Riemenantrieb Gehärtetes Getriebemodell: Getriebe (Evolventenverzahnung) ZLYJ420-28-I Drehzahlregelung: Frequenzumformer 2. Gummibandkopf (pneumatisch) Ausstattungstyp: E200-PDJT-03-00 Einsatzzweck: Zusammen mit Extruder zur Herstellung extrudierter, expandierter Platten Außenmaße: 1170 × 510 × 330 mm (L × B × H) Kopfmaterial: 40Cr Beheizung: Durch Formtemperiergerät, Wasserkreislauf Wärmebehandlung: Vergüten, Einsatzhärten Cgjdpjy Ez Ersfx Acpsu Oberflächenbehandlung: Galvanisch beschichtet Strömungskanal: Gerade Bauweise

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2022, Fungsionalitas: berfungsi sepenuhnya, daya: 4 kW (5,44 hp), laju aliran volumetrik: 0,57 m³/jam, tekanan kerja: 11 batang, tekanan (maks.): 11 batang, jenis pendinginan: udara, Perlengkapan: Pelat tipe tersedia, dokumentasi / manual, Renner REKO 700D/90 - Demonstration Unit Mobile piston compressor with tank Standard equipped with all safety fittings and an electrical connection cable with plug, and Condor pressure switch with operating hours counter Compressed air tank fitted with safety valve, tank pressure gauge, and condensate drain valve Fully automatic operation via pressure switch with start-up relief, motor protection, and on/off switch Premium specification for universal use – anti-vibration mounts for stationary installation included Cedpfxou Ttlcs Acpegu With V-belt drive, two cylinders arranged in-line for especially smooth operation Low compressor speed ensures extended component life, noise reduction, and minimal vibration Option at extra cost: filter pressure regulator for controlled, condensate, dirt, and oil-free compressed air, available from a tank volume of 50 litres With device supply line and air outlet via safety coupling NW 7.2 Intake capacity: 727 l/min Effective delivery rate: 570 l/min Rated power: 4.0 kW Voltage: 400 V Max. pressure: 11 bar Cylinders/stages: 2/2 Speed: 1000 rpm Sound level: 95 dB(A) Compressed air tank: 90 l Dimensions L x W x H: 1030 x 483 x 1100 mm Weight: 128 kg

Tahun pembuatan: 2017, Kondisi: hampir baru (bekas), Used RENNER REKO 550/50VE Air Compressor 10 bar with Petrol Engine Ideal for operations without a power supply (e.g. roadside assistance service vehicles or mobile tyre service) This compressor is used, built in 2017, and has 50 operating hours. The robust, petrol-driven piston compressors offer you – in addition to the well-known RENNER system advantages – especially flexible compressed air supply on construction sites, in service vehicles, and many other applications 'off the grid'. They ensure a constant supply of compressed air, regardless of location. The small version is mobile and can be quickly relocated thanks to the ergonomic handle, while the larger version, due to its compact design, can be easily moved with a pallet jack or forklift and loaded onto vehicles. VE = Electric Start. Please note: Supplied without battery. Technical data: - Intake capacity: 550 l/min - Effective delivery: 400 l/min - Petrol engine: 3.6 kW Honda unit with 4.8 HP Cgodpfx Aced H Dr Sspsu - Max. pressure: 10 bar - Cylinders/stages: 2/1 - Speed: 1,400 rpm - Sound level: 98 dB(A) - Air receiver: 50 l - Dimensions (L x W x H): 810 x 460 x 830 mm - Weight: 70 kg Visit our showroom in Erlangen. We offer a large selection of new and used compressors.

Kondisi: baru, 60.06 linear meters of shelving units, 60 cm deep – workshop shelving, storage shelves, hand stock shelf, boltless shelving, small parts storage Cgjdpfxszbtxzs Acpou Specifications: - Height: approx. 200 cm - Depth: approx. 60 cm - Length: approx. 60.06 linear meters Shelf system offer, total 60.06 linear meters, comprising: - 61 x uprights approx. 200 x 60 cm, disassembled (including 2 x foot & 2 x top cap per upright) - 300 x shelf panels approx. 100 x 60 cm - 1200 x shelf supports - 61 x diagonal braces 1176 mm (for cross bracing) - 61 x tension locks (for cross bracing) - Manufacturer: META CLIP - Load capacity: 150 kg per shelf, with evenly distributed load - Levels: 5 storage levels - Surface: sendzimir galvanized - New goods ex stock - Made in Germany - 100% quality at the best price Frame pre-assembly can be carried out by us for a small additional charge of €2/net per piece. -- IMMEDIATELY AVAILABLE MULTIPLE TIMES -- Price: €8,000 net plus VAT as required by law You will receive an invoice with VAT shown separately. Transport: Delivery available on request via our partner haulier. Costs depend on postal code. Assembly: Our trained personnel are happy to assist you with the professional assembly and dismantling of your business equipment if required. Our recommendation: Let us know your requirements... We are happy to support you in realizing your projects – from planning and ordering to assembly.

Kondisi: baru, 60.06 running metres of shelving racks, 40 cm deep, workshop racks, storage racks, large compartment racks, manual warehouse, shelving racks, small parts storage. Specifications: - Height: approx. 200 cm - Depth: approx. 40 cm - Length: approx. 60.06 running metres Shelf system offer, 60.06 running metres, consisting of: - 61 uprights, approx. 200 x 40 cm, disassembled (incl. 2 feet & 2 end caps each). - 300 shelves, approx. 100 x 40 cm. - 1,200 shelf supports. - 61 diagonals, 1176 mm (for cross bracing). - 61 turnbuckles (for cross bracing). - Manufacturer: META CLIP. - Load capacity: 150 kg per shelf, with evenly distributed load. - Levels: 5 storage levels. - Surface: Sendzimir galvanized. - Brand new from stock. - Made in Germany. - 100% quality at the best price. Pre-assembly of the frames can be carried out by us for a small additional charge of €2 net per unit. -- IMMEDIATELY AVAILABLE IN MULTIPLE QUANTITIES -- Price: €5,610.00 net plus statutory VAT An invoice with disclosed VAT will be issued. Transport: Delivery can be arranged by our partner haulage company on request, costs depend on postcode. Assembly: Cedpezbqycefx Acpjgu Our trained staff will be happy to assist you with the professional assembly and disassembly of your operating equipment if required. Our recommendation: Let us know your requirements... We are happy to assist you with your projects, from planning to ordering through to installation.

Kondisi: baru, 15.06 linear meters of shelving racks, 60 cm deep, workshop shelving, storage racks, large compartment racks, manual storage racks, shelving racks, small parts storage. Specifications: - Height: approx. 200 cm - Depth: approx. 60 cm - Length: approx. 15.06 linear meters Rack package 15.06 linear meters includes: - 16 x uprights approx. 200 x 60 cm, disassembled (incl. 2 x base plates & 2 x end caps). - 75 x shelves approx. 100 x 60 cm. - 300 x shelf brackets. - 16 x diagonal braces 1176 mm (for cross bracing). Cgedpezbqxlefx Acpeu - 16 x tensioners (for cross bracing). - Manufacturer: META CLIP. - Load capacity: 150 kg per shelf, with evenly distributed load. - Levels: 5 storage levels. - Surface: Sendzimir galvanized. - New stock, available from warehouse. - Made in Germany. - 100% quality at the best price. Frame pre-assembly can be performed by us for a small surcharge of €2/net per unit. -- AVAILABLE IMMEDIATELY IN MULTIPLE UNITS -- Price: €2,116.00 net plus statutory VAT. You will receive an invoice indicating VAT. Transport: Delivery can be arranged through our partner freight carriers, with costs depending on the postal code. Assembly: Our trained staff are available to assist with the professional assembly and disassembly of your facility upon request. Our recommendation: Let us know your requirements... We are happy to help you realize your projects, from planning and ordering to installation.

Kondisi: baru, en Cgjdpfxezbqnge Acpou

Kondisi: baru, 15.06 linear metres of shelving units, 40 cm deep – Workshop shelving, warehouse racking, small-parts storage, boltless shelving system Specifications: - Height: approx. 200 cm - Depth: approx. 40 cm - Length: approx. 15.06 linear metres Shelving package (15.06 linear metres) includes: - 016 x uprights, approx. 200 x 40 cm, supplied dismantled (incl. 2 x base feet & 2 x top caps each) - 075 x shelves, approx. 100 x 40 cm - 300 x shelf brackets - 016 x diagonal braces, 1176 mm (for cross-bracing) - 016 x turnbuckles (for cross-bracing) - Manufacturer: META CLIP - Load capacity: 150 kg per shelf (with evenly distributed load) - Number of levels: 5 storage levels Cgodpfx Acjzbqnajpju - Surface: Sendzimir galvanized finish - New stock available from warehouse - Made in Germany - 100% quality at the best price Optional: Pre-assembly of the frames can be carried out by us for a small surcharge of €2 net per unit. -- IMMEDIATELY AVAILABLE IN MULTIPLE QUANTITIES -- Price: €1,648.00 net plus legally applicable VAT You will receive an invoice with VAT indicated. Transport: Delivery upon request via our partner shipping company; costs depend on your postal code. Assembly: Our trained staff are available to assist with professional assembly and disassembly of your facility equipment as needed. Our recommendation: Let us know your requirements... We are happy to support you in the realisation of your projects: from planning and ordering through to installation. Interested or have questions? Contact us by message or phone. You can find our phone number on our company page. ☎️ We are available by phone Monday to Friday, 8:00 AM – 3:00 PM. Alternatively, send us a message with your name and number – we will get back to you as soon as possible.

Kondisi: baru, Tahun pembuatan: 2025, gaya penekanan: 400 t, panjang langkah: 1.000 mm, lebar meja: 1.200 mm, panjang meja: 1.500 mm, gaya penarikan balik: 150 t, tekanan kerja: 250 batang, Perlengkapan: dokumentasi / manual, penghadang cahaya keselamatan, CRONOSSTECH CHSP 400/150 H-Type Hydraulic Deep Drawing (Flanging) Press – 8 Guide Rails General Description The CRONOSSTECH CHSP series H-type hydraulic deep drawing presses are developed with a double-acting working principle to ensure controlled material flow for sheet forming, deep drawing, and flanging applications. Thanks to its 8-slider H-frame design, maximum rigidity is ensured during the pressing operation; parallelism and perpendicularity tolerances are consistently maintained throughout the long stroke. The CHSP 400/150 model, with a 400-ton main ram and a 150-ton cushion ram (blankholder), is designed for deep drawing and flanging applications requiring high tonnage. The frame construction is stress-relieved by vibration to ensure long-lasting and reliable operation. ⚙️ Standard Equipment - Steel construction, 8-guide H-frame press body - Stress-relieved frame by vibration - Bronze Zr14 slide bearings - Fully certified welding applications with TÜRK-AK accredited WPQR and WPS approvals (EN ISO 15614-1:2017 / EN ISO 14731) - Design and manufacturing in compliance with CE standards - PLC-controlled hydraulic system - 7” DELTA touchscreen panel - Adjustable stroke control for ram and cushion Cedpfxjx N Uhhs Acpsgu - Adjustable ram and cushion tonnage (pressure) control - Automatic lubrication system - Electronic filter contamination warning system - Display of hydraulic unit oil temperature and system status on screen - Cooling system - Off-line filtration - Safety systems to ensure operator protection - SIEMENS – SCHNEIDER electrical components 📐 Technical Specifications – CHSP 400/150 - Type: Steel construction, 8-guide H-frame press body - Frame Material: St52 – ERDEMİR - Slide Bearings: Bronze Zr14 - Capacity (Ram): 400 Ton - Capacity (Cushion/Blankholder): 150 Ton - Moving Table Size: 1200 × 1500 mm - Fixed Table Size: 1200 × 1500 mm - Parallelism Tolerance: 120 micron/m - Perpendicularity Tolerance: 60 micron/m - Stroke (Ram): 1000 mm - Stroke (Cushion): 350 mm - Min. daylight: 100 mm - Max. daylight: 1100 mm - Stress relief: Vibratory stress relieving - Welding application: WPQR and WPS approved by TÜRK-AK, EN ISO 15614-1:2017 (Welding procedures are supervised by ‘welding coordination engineers’ certified as per EN ISO 14731) - Max. Working Pressure: 250 Bar - Total Motor Power: 37 kW – IE3 - Main Pump: 45 cm³ – REXROTH or PARKER - Moving Table Fast Down Speed: 150 mm/sec - Moving Table Drawing Speed: 12 mm/sec - Moving Table Return Speed: 170 mm/sec - Cushion Table Forward Speed: 30 mm/sec - Main Cylinder Bore: Ø450 mm – Ck45 - Cushion Cylinder Bore: Ø280 mm – Ck45 - Auxiliary Acceleration Cylinders: 2 units - Approximate Press Height: 5600 mm - Approximate Press Width: 3250 mm - Approximate Press Depth: 2200 mm - Die Height from Floor: 1400 mm - Pre-fill Valve: NG 150 - Hydraulic Unit: REXROTH or PARKER - Cooling System: EMMEGI – CIESSE – PARKER - Off-line Filtration: REXROTH or PARKER - Linear Measurement Scale: NOVATECHNIK or TURCK - PLC: DELTA - Touchscreen Panel: DELTA 7” - Electrical Components: SIEMENS – SCHNEIDER - Approximate Weight: 24 Tons Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Kondisi: baru, Tahun pembuatan: 2025, gaya penekanan: 150 t, panjang langkah: 500 mm, lebar meja: 800 mm, panjang meja: 1.000 mm, tekanan kerja: 250 batang, Perlengkapan: dokumentasi / manual, penghadang cahaya keselamatan, CRONOSSTECH CHP 150 H-Frame Single-Acting Hydraulic Press – 8-Guided Slides General Description The CRONOSSTECH CHP series H-frame single-acting hydraulic presses are industrial presses with a rigid steel construction, designed for sheet metal forming, straightening, assembly, and die pressing applications. The H-frame structure with 8 guiding slides ensures stable, balanced, and repeatable operation during pressing. The CHP 150 model has been developed to deliver reliable performance and long-term use for medium tonnage applications. CHP Series – Structural Features CHP series presses are engineered with consideration for heavy-duty usage. The frame and supporting parts are stress-relieved through vibration. Bronze Zr14 guide bushings provide smooth load transfer and long-term stability. ⚙️ Standard Equipment • Steel construction, 8-slide guided H-frame press body • Stress-relieved frame and supporting parts by vibration • Bronze Zr14 guide bushings • TÜRK-AK accredited WPQR & WPS certified welding applications (EN ISO 15614-1:2017 / EN ISO 14731) • Machine design and production in compliance with CE standards • PLC-controlled hydraulic system • Touch panel display (DELTA 7”) • Adjustable ram stroke and tonnage control • Automatic lubrication system • Electronically monitored filter contamination warning • On-screen monitoring of hydraulic unit oil temperature and system status • Cooling system • Off-line filtration • Two-hand control system • Light barrier (operator safety as standard) • SIEMENS – SCHNEIDER switchgear components 📐 Technical Specifications – CHP 150 Type: Steel construction, 8-slide guided H-frame press body Frame Material: St52 – ERDEMİR Guide Bearings: Bronze Zr14 Cjdpfex N T Dzsx Acpsgu Capacity (Ram): 150 Tons Moving Table Dimensions: 800 × 1000 mm Fixed Table Dimensions: 800 × 1000 mm Parallelism Tolerance: 120 micron/meter Perpendicularity Tolerance: 60 micron/meter Stroke (Ram): 500 mm Min. Daylight: 100 mm Max. Daylight: 600 mm Stress Relieving: Vibration stress relieving Welding Application: WPQR and WPS certified welding accredited by TÜRK-AK, in compliance with EN ISO 15614-1/2017, supervised by certified welding coordination engineers as per EN ISO 14731 Max. Working Pressure: 250 Bar Total Motor Power: 18.5 kW – IE3 Main Pump: 32 cm³ – REXROTH or PARKER Moving Table Fast Down Speed: 150 mm/sec Moving Table Pressing Speed: 12 mm/sec Moving Table Return Speed: 170 mm/sec Main Cylinder Internal Diameter: Ø280 mm – Ck45 Approx. Press Height: 3650 mm Approx. Press Width: 2950 mm Approx. Press Depth: 2000 mm Lower Table Height from Floor: 1250 mm Pre-fill Valve: NG 100 Hydraulic Power Unit: REXROTH or PARKER Cooling System: EMMEGI – CIESSE – PARKER Off-line Filtration: REXROTH or PARKER Linear Position Sensor: NOVATECHNIK or TURCK PLC Application: DELTA Touch Panel Display: DELTA 7” Switchgear Components: SIEMENS – SCHNEIDER Approximate Weight: 7 Tons Production Note This machine is manufactured in Turkey by CRONOSSTECH.

Kondisi: baru, Tahun pembuatan: 2025, gaya penekanan: 150 t, panjang langkah: 600 mm, lebar meja: 1.000 mm, panjang meja: 1.200 mm, gaya penarikan balik: 50 t, tekanan kerja: 250 batang, Perlengkapan: dokumentasi / manual, penghadang cahaya keselamatan, CRONOSSTECH CHSP 150/50 H-Type Hydraulic Deep Drawing (Forming) Press – 8-Guided General Description The CRONOSSTECH CHSP series H-type hydraulic deep drawing presses are developed with a double-acting operating principle to ensure controlled material flow during sheet metal forming, deep drawing, and forming applications. The 8-guided H-frame body construction provides maximum rigidity throughout the pressing process; parallelism and perpendicularity tolerances are consistently maintained throughout the stroke. The CHSP 150/50 model, with a 150-ton main ram and a 50-ton lower cushion (pot) capacity, is designed for precise and repeatable deep drawing applications. The frame construction is stress-relieved by vibration to ensure long-lasting and reliable operation. ⚙️ Standard Equipment - Steel construction, 8-guided H-frame press body - Vibration stress-relieved body structure - Bronze Zr14 guide bushings - WPQR and WPS approved welding applications accredited by TÜRK-AK (EN ISO 15614-1:2017 / EN ISO 14731) Cedpfx Ajx N T U Hscpjgu - Design and manufacturing in compliance with CE standards - PLC-controlled hydraulic system - Touchscreen panel (DELTA 7”) - Adjustable ram and cushion stroke control - Adjustable ram and cushion tonnage (pressure) control - Automatic lubrication system - Electronic filter contamination warning - Real-time display of hydraulic unit oil temperature and system status - Cooling system - Off-line filtration - Safety systems for operator protection - SIEMENS – SCHNEIDER electrical components 📐 Technical Specifications – CHSP 150/50 Type: Steel construction, 8-guided H-frame press body Frame Material: St52 – ERDEMİR Guide Bushings: Bronze Zr14 Capacity (Ram): 150 Tons Capacity (Cushion): 50 Tons Movable Table Dimension: 1000 × 1200 mm Fixed Table Dimension: 1000 × 1200 mm Parallelism Tolerance: 120 micron/meter Perpendicularity Tolerance: 60 micron/meter Stroke (Ram): 600 mm Stroke (Cushion): 200 mm Min. Clearance: 100 mm Max. Clearance: 700 mm Stress Relief: Vibration stress-relief Welding Application: WPQR and WPS approved, accredited by TÜRK-AK EN ISO 15614-1/2017 (welding applications are supervised by “welding coordination engineers” certified according to EN ISO 14731) Max. Working Pressure: 250 Bar Total Motor Power: 18.5 kW – IE3 Main Pump: 32 cm³ – REXROTH or PARKER Movable Table Fast Descent Speed: 150 mm/sec Movable Table Forming Speed: 12 mm/sec Movable Table Return Speed: 170 mm/sec Cushion Table Forward Speed: 30 mm/sec Main Cylinder Inner Diameter: Ø280 mm – Ck45 Cushion Cylinder Inner Diameter: Ø160 mm – Ck45 Auxiliary Acceleration Cylinders: 2 units Approximate Press Height: 3,650 mm Approximate Press Width: 2,950 mm Approximate Press Depth: 2,000 mm Table Height from Floor: 1,250 mm Pre-fill Valve: NG 100 Hydraulic Unit: REXROTH or PARKER Cooling System: EMMEGI – CIESSE – PARKER Off-line Filtration: REXROTH or PARKER Linear Distance Scale: NOVATECHNIK or TURCK PLC System: DELTA Touchscreen Display: DELTA 7” Electrical Components: SIEMENS – SCHNEIDER Approximate Weight: 11 Tons Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Kondisi: baru, Tahun pembuatan: 2025, gaya penekanan: 150 t, panjang langkah: 200 mm, lebar meja: 900 mm, panjang meja: 1.800 mm, masa garansi: 24 bulan, Perlengkapan: penghadang cahaya keselamatan, Cam-type Press (Eccentric Press) is a type of mechanical press driven by a force generated through an eccentric mechanism, designed for cold forming operations such as punching, cutting, and die forming. H-type (straight-side) eccentric presses provide high stability and process safety particularly in applications requiring large bolster areas and heavy dies, thanks to their rigid frame construction. CRONOSSTECH H-Type Eccentric Press 150 Tons offers stable operation during high-volume production and is focused on die protection and operator safety. With its monoblock frame, 8-point guided slide system, hydraulic overload protection, and automatic lubrication infrastructure, it delivers reliable performance suitable for continuous production environments. Key Advantages Stable operation for large dies with spacious bolster dimensions Die/equipment protection via hydraulic overload protection High-precision guidance with 8-point slide + counterbalance piston Controlled and user-friendly operation with PLC + touch screen Enhanced operator safety with light curtain protection Application Areas Punching/cutting/forming applications requiring large bolster Serial production with automated feeding lines Heavy die and high-tonnage production processes ✅ STANDARD FEATURES • Welded steel frame construction • Pneumatic clutch–brake system • Additional T-slotted bolster plate • 8-point guided slide • Adjustable stroke on single connecting rod • Counterbalance piston on slide • Fully automatic micro-lubrication system • PLC control system • Piano-type control panel • Touchscreen LCD display • Reverse motor operation • Hydraulic overload protection • Motorized slide adjustment mechanism • Light curtain protection • Enclosed gear group in oil reservoir • Dual-coil safety valve • CE compliance ✅ OPTIONAL FEATURES • Press feeding systems • Scrap discharge systems • Sliding safety cover at front of bolster • Dies manufactured as per specifications ✅ TECHNICAL SPECIFICATIONS (H-TYPE – 150 TONS) Capacity: 150 Tons Useful area of lower bolster: 900×1800 mm Useful area of upper plate: 900×1800 mm Fixed stroke: 200 mm Nominal material thickness: 7 mm SPM (Strokes Per Minute): 60 Max. closed die height: 500 mm Min. closed die height: 380 mm Adjustment (slide adjustment): 120 mm Number of connecting rods: 2 units Number of eccentric shafts (cranks): 2 units Safety fuse: Hydraulic Electrical components inside panel: Siemens – Schneider Lubrication system: Automatic Screen / PLC / Inverter: Siemens – Pilz Safety barrier: Leuze Operation mode: 4-position Die memory: 99 sets Mounting: Floor-standing Frame type: Monoblock Motor power: 22 kW Motor speed (RPM): 1450 Approximate machine dimensions (L×W×D): 4500×3000×2000 mm Approximate weight: 20 Tons Note: Please notify us for any changes required in technical specifications. Cgsdpex N Ru Dofx Acpju ✅ PRODUCTION / SUPPLY NOTE This machine is manufactured in Turkey by CRONOSSTECH. Sales, commissioning, and after-sales processes are managed by CRONOSSTECH.

Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, tekanan kerja: 150 batang, berat kosong: 164 kg, tegangan masuk: 400 V, masa garansi: 12 bulan, suhu: 140 °C, TECHNICAL DATA: CONDITION: NEW! Model: KRÄNZLE THERM CA 12/150 TR Manufacturer: KRÄNZLE Catalogue Number: 626210 Country of Manufacture: Germany Series: THERM (Professional) Voltage (Ph/V/Hz): 3 / 400 / 50 Pump Flow Rate (l/h): 720 Maximum Water Temperature (°C): max. 80 Maximum Steam Temperature (°C): max. 140 Operating Pressure (bar): 150 Power Consumption (kW): 3.8 Weight incl. accessories (kg): 164 Fuel tank capacity (l): 25 Dimensions (L x W x H) (mm): 860 x 580 x 1220 FEATURES: INTEGRATED HOSE REEL Spray Gun: Kränzle M22/Quick Coupling Spray Lance: Kränzle (Quick Coupling) Power Nozzle 25° 15 m hose ADVANTAGES OF THE KRÄNZLE THERM CA 12/150 TR: The THERM CA 12/150 TR is ideally suited for factories, businesses, and industrial halls. It is also successfully used by large and small transport companies, automotive workshops, and in agriculture. Even private customers expecting the highest cleaning standards will be impressed by it. The THERM product line is characterized by smooth and continuous operation, making the CA 12/150 TR suitable for a wide range of industries. Additional handles allow for transport of the device with further accessories. The brass pump head extends the machine's service life. A large water filter protects the pump from contamination in the water. Standard equipment includes a high-pressure gun with lance, a 15 m high-pressure hose, a hose reel, and a 25° power nozzle. The machine also features a quick coupling system allowing up to five times faster accessory changes compared to conventional threaded systems. RELIABLE | DURABLE | ERGONOMIC Thanks to its housing, the device can also be used in hard-to-reach locations or at frequently changing work sites. Additional handles enable transport with further accessories. The brass pump head extends the machine's service life. It combines efficient water cooling with a robust air cooling system, ensuring maximum cooling performance even with fluctuating ambient and water temperatures. Standard scope of delivery includes a high-pressure gun with lance, a 15 m high-pressure hose on a hose reel, and a power nozzle. The machine also features a quick coupling system enabling up to 5 times faster accessory changes than conventional threaded systems. The device is a complete new development. Cjdpfx Acey Shflepjgu

Kondisi: bekas, de Cgodpfxow Swyqj Acpju

Kondisi: bekas, tra-001 Cgsdpfx Acsy Hpzdspsu

Kondisi: diremaj di bengkel (bekas), Fungsionalitas: berfungsi sepenuhnya, tekanan kerja: 150 batang, panjang selang tekanan tinggi: 10.000 mm, tegangan masuk: 400 V, bahan bakar: listrik, berat keseluruhan: 135 kg, masa garansi: 6 bulan, suhu: 80 °C, en-GB Cgedpfjv Src Nox Acpsu

Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2026, DE Csdpsxp Scgsfx Acpjgu

Kondisi: baru, Tahun pembuatan: 2026, Fungsionalitas: berfungsi sepenuhnya, CONSTMACH Backenbrecher sind für eine hohe Haltbarkeit und überlegene Zerkleinerungsleistung konzipiert und eignen sich ideal für den primären Zerkleinerungseinsatz in Steinbrüchen und Bergwerken. Sie sind in der Lage, eine breite Palette von Materialien zu verarbeiten – von weichstem Kalkstein bis zu den härtesten Gesteinsarten wie Granit und Basalt. Dank robuster Ausführung, hohem Schwungradmoment und spezieller Backengeometrie erzielen die Maschinen eine effiziente Zerkleinerung des Materials auf gleichmäßige Körnungen. Der moderne hydraulische Verstellmechanismus ermöglicht eine einfache Justierung der gewünschten Ausgabekorngröße und minimiert den Bedienereingriff. CONSTMACH Backenbrecher gewährleisten eine langanhaltende Nutzung durch ihre geschmiedete Chrom-Nickel-Stahl-Pitman-Struktur, Schwerlastlager und automatisches Schmiersystem. Der verschweißte Hauptrahmen, der einer thermischen Spannungsfreisetzung unterzogen wurde, garantiert maximale Lebensdauer selbst bei hohen Vibrationen. Das wartungsfreundliche Design sorgt für einen unterbrechungsfreien und sicheren Betrieb während des Produktionsprozesses. Die Maschinen lassen sich sowohl stationär als auch mobil einsetzen und bieten so hohe Flexibilität in Bauprojekten. CJC-60 Technische Daten Maulweite: 600 x 380 mm Motorleistung: 30 kW Wellenumdrehung: 330 U/min Gewicht: 6.000 kg Min./Max. Einstellung: 30 - 100 mm Leistung: 60 - 110 t/h CJC-90 Technische Daten Maulweite: 900 x 650 mm Motorleistung: 75 kW Wellenumdrehung: 277 U/min Gewicht: 11.400 kg Min./Max. Einstellung: 50 - 150 mm Leistung: 90 - 270 t/h Cgedpfsxpkgdox Acpju CJC-110 Technische Daten Maulweite: 1.100 x 850 mm Motorleistung: 132 kW Wellenumdrehung: 230 U/min Gewicht: 33.000 kg Min./Max. Einstellung: 60 - 200 mm Leistung: 150 - 420 t/h CJC-130 Technische Daten Maulweite: 1.300 x 1.000 mm Motorleistung: 160 kW Wellenumdrehung: 220 U/min Gewicht: 42.500 kg Min./Max. Einstellung: 100 - 280 mm Leistung: 275 - 790 t/h CJC-140 Technische Daten Maulweite: 1.400 x 1.100 mm Motorleistung: 200 kW Wellenumdrehung: 220 U/min Gewicht: 52.000 kg Min./Max. Einstellung: 120 - 280 mm Leistung: 420 - 850 t/h Warum CONSTMACH Backenbrecher wählen? CONSTMACH steht für Qualität und Zuverlässigkeit in der Aufbereitungs- und Zerkleinerungstechnologie. Jeder Backenbrecher wird gemäß internationaler Standards gefertigt und bietet somit maximale Leistung, niedrige Betriebskosten und eine lange Lebensdauer. Durch individuell an Kundenbedürfnisse anpassbare Ausführungen und ein flächendeckendes Servicenetz unterstützt CONSTMACH Ihr Unternehmen bei einer unterbrechungsfreien Produktion. In puncto betriebliche Zuverlässigkeit, Ingenieursqualität und Kundendienst ist CONSTMACH die richtige Wahl für Zerkleinerungsanlagen. Was machen wir bei Constmach? Constmach ist ein führender Maschinenhersteller, der die Bau- und Bergbauindustrie mit einem breiten Produktportfolio bedient. Unser Produktspektrum umfasst Betonsteinmaschinen, stationäre und mobile Betonwerke, Brechmaschinen, Anlagen zur Gesteinsaufbereitung und Siebanlagen, Sandwaschanlagen, Sandherstellungsmaschinen, Asphaltmischanlagen, Förderbandsysteme, Backenbrecher und mobile Brechanlagen. Durch hohe Qualitätsstandards, innovative Produktionsverfahren und kundenorientierte Lösungen ist Constmach sowohl auf nationalen als auch auf internationalen Märkten als verlässliche Marke etabliert. Unsere Produkte sind dank ihrer Langlebigkeit, Effizienz und dauerhaften Leistungsfähigkeit die bevorzugte Wahl vo

Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2026, CONSTMACH Backenbrecher sind für eine hohe Haltbarkeit und überlegene Zerkleinerungsleistung konzipiert und eignen sich ideal für den primären Zerkleinerungseinsatz in Steinbrüchen und Bergwerken. Sie sind in der Lage, eine breite Palette von Materialien zu verarbeiten – von weichstem Kalkstein bis zu den härtesten Gesteinsarten wie Granit und Basalt. Dank robuster Ausführung, hohem Schwungradmoment und spezieller Backengeometrie erzielen die Maschinen eine effiziente Zerkleinerung des Materials auf gleichmäßige Körnungen. Der moderne hydraulische Verstellmechanismus ermöglicht eine einfache Justierung der gewünschten Ausgabekorngröße und minimiert den Bedienereingriff. CONSTMACH Backenbrecher gewährleisten eine langanhaltende Nutzung durch ihre geschmiedete Chrom-Nickel-Stahl-Pitman-Struktur, Schwerlastlager und automatisches Schmiersystem. Der verschweißte Hauptrahmen, der einer thermischen Spannungsfreisetzung unterzogen wurde, garantiert maximale Lebensdauer selbst bei hohen Vibrationen. Das wartungsfreundliche Design sorgt für einen unterbrechungsfreien und sicheren Betrieb während des Produktionsprozesses. Die Maschinen lassen sich sowohl stationär als auch mobil einsetzen und bieten so hohe Flexibilität in Bauprojekten. CJC-60 Technische Daten Maulweite: 600 x 380 mm Motorleistung: 30 kW Wellenumdrehung: 330 U/min Gewicht: 6.000 kg Min./Max. Einstellung: 30 - 100 mm Leistung: 60 - 110 t/h CJC-90 Technische Daten Maulweite: 900 x 650 mm Motorleistung: 75 kW Wellenumdrehung: 277 U/min Gewicht: 11.400 kg Min./Max. Einstellung: 50 - 150 mm Leistung: 90 - 270 t/h CJC-110 Technische Daten Maulweite: 1.100 x 850 mm Motorleistung: 132 kW Wellenumdrehung: 230 U/min Gewicht: 33.000 kg Min./Max. Einstellung: 60 - 200 mm Leistung: 150 - 420 t/h CJC-130 Technische Daten Maulweite: 1.300 x 1.000 mm Motorleistung: 160 kW Wellenumdrehung: 220 U/min Gewicht: 42.500 kg Min./Max. Einstellung: 100 - 280 mm Leistung: 275 - 790 t/h CJC-140 Technische Daten Maulweite: 1.400 x 1.100 mm Motorleistung: 200 kW Wellenumdrehung: 220 U/min Gewicht: 52.000 kg Min./Max. Einstellung: 120 - 280 mm Leistung: 420 - 850 t/h Warum CONSTMACH Backenbrecher wählen? Cgodpfxsxqgt Ao Acpeu CONSTMACH steht für Qualität und Zuverlässigkeit in der Aufbereitungs- und Zerkleinerungstechnologie. Jeder Backenbrecher wird gemäß internationaler Standards gefertigt und bietet somit maximale Leistung, niedrige Betriebskosten und eine lange Lebensdauer. Durch individuell an Kundenbedürfnisse anpassbare Ausführungen und ein flächendeckendes Servicenetz unterstützt CONSTMACH Ihr Unternehmen bei einer unterbrechungsfreien Produktion. In puncto betriebliche Zuverlässigkeit, Ingenieursqualität und Kundendienst ist CONSTMACH die richtige Wahl für Zerkleinerungsanlagen. Was machen wir bei Constmach? Constmach ist ein führender Maschinenhersteller, der die Bau- und Bergbauindustrie mit einem breiten Produktportfolio bedient. Unser Produktspektrum umfasst Betonsteinmaschinen, stationäre und mobile Betonwerke, Brechmaschinen, Anlagen zur Gesteinsaufbereitung und Siebanlagen, Sandwaschanlagen, Sandherstellungsmaschinen, Asphaltmischanlagen, Förderbandsysteme, Backenbrecher und mobile Brechanlagen. Durch hohe Qualitätsstandards, innovative Produktionsverfahren und kundenorientierte Lösungen ist Constmach sowohl auf nationalen als auch auf internationalen Märkten als verlässliche Marke etabliert. Unsere Produkte sind dank ihrer Langlebigkeit, Effizienz und dauerhaften Leistungsfähigkeit die bevorzugte Wahl vo

Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2026, de Cgodpfx Acexqgwzopou

Kondisi: baik (bekas), 1 Cjdpfx Acel U E Twspsgu