Beli Scm Pusat Pemesinan Milling Dan Pengeboran bekas (35.314)

Kondisi: sangat baik (bekas), Tahun pembuatan: 2013, Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2013 Nwsdpfow Npyqex Aa Ueg Kepala milling Area kerja X: 3000 Area kerja Y: 900 Area kerja Z: 50 Unit terpisah: 1 Bor vertikal: 12 Bor horizontal X: 4 Bor horizontal Y: 2 Gergaji alur: Ya Mesin stasioner: Ya Sistem penjepit: Jangkar Pengaman: Fotocell Kontrol dan perangkat lunak SCM XILOG Luas minimum: 3920x1170x2150

Kondisi: bekas, CNC Vertical Machining Center HURCO Type BMC 30/M Serial No: B3M92202056AB : 9650234 Year of construction: 1996 CNC Path Control Ultimax 3 Travel paths X: 760 mm, Y: 460 mm, Z: 610 mm Table size (clamping surface) 1010 x 400 mm Table size (with coolant groove) 1120 x 500 mm Spindle taper SK 40 Distance spindle nose - table 150 - 760 mm Overhang 450 mm Spindle speed 80 to 8000 rpm, stepless Feed rate 3 to 16,000 mm/min Rapid traverse 24 m/min Spindle drive 7.5 kW at 30 min / 5.5 kW at 100% Mains connection 400 Volt, 50 Hz - CNC path control Ultimax 3 (with hardware update e.g. TFT monitors) - electronic handwheel - Indirect measuring system with rotary encoders mounted on the ballscrew - Tool changer with 24 tool positions - Fully enclosed safety cabin with sliding door - Swiveling control panel - Yaskawa spindle drives (Japan) - Pneumatic mechanical tool clamping system - Coolant system externally mounted, pushed in from the rear - Tank flushing Machine width 2400 mm Space required for transport L x W x H 3400 x 2400 x 2550 mm Nodpfx Ajtrhq Hsa Ujwg Weight approx. 4800 kg Good condition

Kondisi: bekas, cnc-vertikal-bmc25m-en Nwjdpfx Ajw Nklhoa Ueg

Kondisi: bekas, CNC vertical machining center FEHLMANN type PICOMAX 60 CNC control HEIDENHAIN TNC 426 Serial No. 14599641 Year of manufacture: 1999 Travel ranges X: 500 mm, Y: 350 mm, Z: 610 mm Feed rate 1 - 20,000 mm/min Rapid traverse 20 m/min Feed force: 12,000 N Clamping surface of the table 920 x 380 mm T-slots 7 pcs, 12-H8 mm Max. table load 250 kg Table height 1,004 mm Distance spindle nose - table 94 - 704 mm Spindle overhang - column 405 mm Spindle speed 50 - 18,000 rpm, stepless Spindle drive 10.2 kW (60% duty cycle) Max. torque 70 Nm (up to 1,240 rpm) Spindle taper SK 30 / DIN 69871A Pull stud DIN 69872 Drilling capacity in steel 25 mm Milling capacity in steel / aluminium 100 / 700 cm³/min Tapping capacity in steel / aluminium M20 / M24 Tool changer 24 positions Nwsdpey N Du Dsfx Aa Ujg Tool change time approx. 6 sec. Chip-to-chip time approx. 8 sec. Control Heidenhain TNC 426 Power supply 400 Volt, 50 Hz Connected load 20 kW - Electronic handwheel Heidenhain HR410 - 3D probe Renishaw MP12 - Tool measurement system - TFT display - Direct path measuring system - Coolant system 200 liters, external - Spindle cooling unit, external - Central lubrication Vogel - Pneumatic supply 6 bar, 40 - 200 l/min - Oil mist extraction - Operating hours: - Control on 97,000 h - Machine on 80,000 h - Program run 42,000 h Space required L x W x H 2,000 x 1,700 x 3,000 mm Weight approx. 3.2 tons Good condition

Kondisi: bekas, Tahun pembuatan: 2012, jam operasional: 9.974 h, tinggi total: 2.700 mm, panjang total: 7.700 mm, lebar total: 2.420 mm, CNC machining center SCM Morbidelli M-600 Unladen weight: 7,390 kg 5-axis machine Year of manufacture: 2012 Machine no.: AA2/002032 X-axis working travel: 5,020 mm Y-axis working travel: 1,680 mm Z-axis working travel: 250 mm Tool magazine positions: 36 Vertical drilling spindles: 24 Software: SCM XILOG MAESTRO SCM PRISMA K SCM TTS system Liquid-cooled milling spindle SCM TecPad MORBIDELLI TV Matic SCM PRO-SPACE SCM RAPID 12 SCM RAPID 24 Includes vacuum pump Capacity: 250 m³/h Disassembled for transport Weight: 7,450 kg - Special features: - Description: Machine reports spindle error - Year of manufacture: 2012 - Documentation available: No - CE marking available: Yes - CE certificate available: No - Serial number: AA2/002032 - Operating hours: 9,974 - Number of milling spindles: 1 - Milling spindle 1: - Number of controlled axes: 5 - Type of router table: Beam table - Drilling tool included: Yes - Horizontal drilling spindles: 6 - Vertical drilling spindles: 24 - Saw unit included: Yes - Tool changer positions: 36 - System/software: SCM Maestro - Vacuum pump included: Yes - Quantity: 1 - Brand: Becker - Capacity: 250 m³/h - CNC options: Waste conveyor - Working area X [mm]: 5,020 Nwsdownhccopfx Aa Usg - Working area Y [mm]: 1,680 - Z-axis working area [mm]: 250 - Transport dimensions: 7,700 mm x 2,420 mm x 2,700 mm (L x W x H) - Transport weight [kg]: 7,390 - Transport packages: 1 Financial information VAT: The price quoted is exclusive of VAT VAT/differential taxation: VAT deductible for business customers Delivery and trade-in possible at any time for all industrial equipment. Glenn Smeets

Kondisi: bekas, Tahun pembuatan: 2013, tinggi total: 2.240 mm, panjang total: 5.240 mm, lebar total: 2.500 mm, Empty weight: 2,700 kg - Year of manufacture: 2013 - Documentation available: Yes - CE marking present: Yes - CE certificate available: No - Serial number: AA1/017355 - Number of milling spindles [pcs]: 1 - └ Milling spindle 1: - - Number of controlled axes [pcs]: 3 - - Max. spindle speed [rpm]: 24,000 - - Main motor power [kW]: 9.5 - Type of milling table: Beam table - Drilling unit included: Yes - └ Horizontal drilling spindles [pcs]: 6 - └ Vertical drilling spindles [pcs]: 12 - Saw unit included: Yes - System/software: SCM Maestro - Working area X [mm]: 3,050 - Working area Y [mm]: 1,250 - Z-axis working range [mm]: 1,810 - Y-axis maximum stroke [mm]: 1,550 - Voltage [V]: 400 - Current consumption [A]: 31 - Transport dimensions: 5,240mm x 2,500mm x 2,244mm (l x w x h) - Transport weight [kg]: 2,700kg - Number of transport packages [pcs]: 1 Financial Information VAT: The stated price is plus VAT Nwedpswnii Rsfx Aa Ujg VAT/margin taxation: VAT is deductible for entrepreneurs Delivery and trade-in possible at any time for all items from the industrial sector Glenn Smeets

Kondisi: bekas, Tahun pembuatan: 2018, Price: On request CNC Machining Center SCM ACCORD 25 FX Brand: SCM Model: ACCORD 25 FX Year of manufacture: 2018 Machine no.: AA10000992 Machining table dimensions: 5020 x 1380 mm (L x W) Worktable equipped with 2 vacuum zones Worktable equipped with 2 reference stops Includes 8 positioning pins and 8 supports XY Vector Speed: 35 m/min Axis movements Max. X-axis speed (per zone): 25 m/min Max. X-axis speed (traverse): 90 m/min Max. Y-axis speed: 90 m/min Max. Z-axis speed: 30 m/min Control system Machine control: KVARA Control Windows Embedded Standard 7-64bit Hard drive capacity: 500 GB - 7200 rpm Microprocessor: Intel Pentium 2.9GHz RAM: 8GB DDR4 XILOG-MAESTRO software package Including vacuum pump Motor power: 5.5 kW Pump capacity: 250 m³/h Max. vacuum: 0.9 bar Overall dimensions: 9000 x 4500 x 3000 mm (L x W x H) Total weight: 7,500 kg - Year: 2018 - Documentation available: No - CE marking present: Yes - CE certificate available: No - Serial number: AA10000992 - Number of milling spindles: 2 └ Milling spindle 1: - Number of controlled axes: 3 - Min. spindle speed: 6,000 rpm - Max. spindle speed: 18,000 rpm - Main motor power: 15 kW └ Milling spindle 2: - Number of controlled axes: 3 - Min. spindle speed: 600 rpm - Max. spindle speed: 24,000 rpm - Main motor power: 12 kW - Type of routing table: Beam table - Tool holding system: HSK-F63 - Tool changer positions: 12 - System/software: SCM Maestro - Safety feature: Bumper - Vacuum pump available: Yes └ Quantity: 1 Nwedpfeycwupex Aa Usg └ Brand: Becker └ Main motor power: 5.5 kW └ Capacity: 250 m³/h - CNC options: Waste conveyor - Table length: 5,020 mm - Table width: 1,380 mm - Y working area: 1,300 mm Financial information VAT: The indicated price is exclusive of VAT VAT/differential taxation: VAT is deductible for business customers Delivery and trade-in possible at any time for all types of industrial equipment Glenn Smeets

Kondisi: bekas, Machine has a fault in the main spindle. CNC Vertical Machining Centre CHIRON Type FZ 22 L high speed Machining centre with CNC control FANUC Series 21-M Serial No. 179-98 Year of manufacture: 1999 Travel distances X: 2000 mm, Y: 520 mm, Z: 630 mm Table size 2700 x 570 mm Table load capacity 525 kg (per meter) Tool holder SK 40 (DIN 69871) Drilling capacity 35 mm Tapping capacity M27 Nwedpfjquhbgex Aa Usg Tool diameter 75 mm Diameter with free adjacent stations 105 mm Tool change time tool-to-tool 2.0 sec. Tool change time chip-to-chip 4.8 sec. Distance spindle nose – table 190 to 820 mm Spindle speed max. 10,500 rpm Main spindle drive max. 18.5 kW Power supply 400 Volt, 50 Hz, 32 kVA - Pendulum machining via 2 work areas (partition wall missing) - CNC control FANUC Series 21-M - 40-position tool changer - Through spindle coolant (IKZ) - Splash guard cabin with sliding door - Indirect path measurement system - Coolant unit with chip conveyor adjacent - Electronic handwheel Transport dimensions of the basic machine L x W x H 4600 x 2470 x 2950 mm Machine weight approx. 7.5 tons Transport dimensions for the truck L x W x H 12000 x 2470 x 2950 mm Transport weight on the truck approx. 10 tons Weight 7.2 tons Good condition – machine has a fault in the main spindle.

Kondisi: bekas, As-new CNC vertical machining center, milling machine VMC, machining center, HSC milling, machining center TAIKAN B540Z Serial no. 1171009 Year of manufacture: 2017 CNC path control: SIEMENS Sinumerik 828 D Basic Axis travels for working area X: 488 mm, Y: 400 mm, Z: 230 mm X-axis travel (for tool change position): X: 540 mm Table size: 520 x 400 mm Spindle taper: ISO 25 Distance spindle nose - table: 165 - 395 mm Spindle speed: max. 36,000 rpm, stepless Njdpfx Aaow Ed U Nj Uswg Feed rate: 0 to 10,000 mm/min Rapid traverse: 15 m/min Table load capacity: 200 kg Maximum tool length: 120 mm Maximum tool diameter: 80 mm Maximum tool weight: 0.8 kg Tool change time: approx. 10 sec Axis drive power: each 0.8 kW Spindle drive power: 3.5 kW at 100% duty cycle Power supply: 400 Volt, 50 Hz, 7.5 kW CNC path control SIEMENS Sinumerik 828 D Basic - Software: NCU V04.05+SP06+HF01 - Interfaces: LAN, USB, and CF-Card - Measuring system for tool measurement: METROL tool sensor - Vertical milling spindle = high-frequency spindle with liquid cooling and recooling unit (adjacent) - Tool changer with 13 magazine positions - Electronic handwheel - Coolant system - Safety enclosure with sliding door - Central lubrication - Includes 10 ISO 25 tool holders with ER20 collet chucks and a set of collets Transport space requirement L x W x H: 1800 x 1500 x 2300 mm Weight: 2900 kg Very good condition – as new Machine comes from a showroom and has only low operating hours.

Kondisi: bekas, SCM Tech 99L Machining Centre Transport dimensions: Nwjdpfx Aetxdqcoa Usg 4,800 x 230 x 260 mm (height) - Weight: 2,800 kg

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2002, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 2.900 mm, jarak lintasan sumbu Y: 1.000 mm, jarak gerak sumbu Z: 700 mm, cnc-2910-description Nsdpfx Aajwymtqo Uewg

Kondisi: bekas, 5-axis turning and milling center (bar machining) Under power in our warehouse Manufacturer: CHIRON Model: MILL 800 5 axis CNC: Fanuc 18iMBS (5 simultaneously controlled axes) Travel (X, Y, Z) (mm): 800 – 500 – 550 Rapid traverse (high speed): 60 m/min Swiveling head (B-axis) ±100° Rotary spindle: Peiseler Milling head: 12,000 rpm / 140 Nm Tool magazine: 65 positions – HSK-A 63 DIN 69893 Table size: 1400 x 500 mm Table load: 1,200 kg Coolant through spindle: 70 bar (adjustable) CNC-controlled clamping/rotary unit for 6th side machining (see note 5) Heidenhain linear measuring system Chip conveyor Renishaw-ready Year of manufacture: 2006 Weight: 7,500 kg Turning package: Nsdpfx Asgmi Unea Ujwg Max diameter: 65 mm Speeds: 15 / 4,500 rpm Max power: 42.5 kW / 90 Nm Hydraulic clamping: 800 Nm Bar loader: ILS-RBK-10012 65 Bar diameters min/max: 5/65 mm Bar length: 600–1,200 mm High speed: 60 m/min Spindle: 20–12,000 rpm – 140 Nm, max. 12,000 rpm 12.5 kW / max 34 kW Swiveling head CNC controlled ±100° Machine is under power in our warehouse. Mimu Werkzeugmaschinen (Italy)

Kondisi: bekas, 5-axis turning and milling center (bar machining) Under power in our warehouse Manufacturer: CHIRON Model: MILL 800 5 axis CNC: Fanuc 18iMBS (5 simultaneously controlled axes) Travel (X, Y, Z) (mm): 800 – 500 – 550 Rapid traverse (high speed): 60 m/min Swiveling head (B-axis) ±100° Rotary spindle: Peiseler Milling head: 12,000 rpm / 140 Nm Tool magazine: 65 positions – HSK-A 63 DIN 69893 Table size: 1400 x 500 mm Table load: 1,200 kg Coolant through spindle: 70 bar (adjustable) CNC-controlled clamping/rotary unit for 6th side machining (see note 5) Heidenhain linear measuring system Chip conveyor Renishaw-ready Year of manufacture: 2006 Weight: 7,500 kg Turning package: Max diameter: 65 mm Speeds: 15 / 4,500 rpm Max power: 42.5 kW / 90 Nm Hydraulic clamping: 800 Nm Bar loader: ILS-RBK-10012 65 Nwsdpfegqg Sgox Aa Ujg Bar diameters min/max: 5/65 mm Bar length: 600–1,200 mm High speed: 60 m/min Spindle: 20–12,000 rpm – 140 Nm, max. 12,000 rpm 12.5 kW / max 34 kW Swiveling head CNC controlled ±100° Machine is under power in our warehouse. Mimu Werkzeugmaschinen (Italy)

Kondisi: bekas, 4-axis CNC drilling and milling machine IXION type 30 CNC W VMC, machining center Year of manufacture: approx. 1997, machine overhauled in 2020 Travel distances X: 600 mm Y: 350 mm Z: 600 mm Table size: 800 x 400 mm T-slot spacing: 75 mm Table load capacity: 300 kg Spindle taper: SK 40 (retention knob DIN 69872 A) Spindle speed: 20-5000 rpm Spindle torque: max. 150 Nm Distance spindle nose to table: max. 660 mm Feed rate X, Y and Z: 0 - 5000 mm/min, stepless Rapid traverse X, Y and Z: 15000 mm/min Tool change time: approx. 5 sec Chip-to-chip time: approx. 7.5 sec Milling capacity in St 60: 150 ccm/min Drilling capacity in St 60: 35 mm Tapping capacity in St 60: M24 Spindle drive power: 5 kW (10 kW at 25% duty cycle) Power supply: 400 Volt, 50 Hz - CNC control Heidenhain TNC 415 with 12" TFT display - Electronic handwheel - RS 232 interface - 12-position automatic tool changer - Hydro-mechanical tool clamping - Rotary axis as dividing head on the table = 4th axis, MECATECNICA type DCN 250-8, 3-jaw chuck Ø 200 mm Speed approx. 25 rpm, gear ratio 1:180 - Cabin lighting via 2x halogen spotlights - Chip conveyor with coolant pump Nwsdpfx Aeu Tln Nja Usg - Control cabinet fixed to the machine Transport dimensions: Length 320 cm x Width 230 cm x Height 300 cm Machine footprint with chip conveyor (L x W x H): 3200 x 3100 x 3000 mm Machine weight: 3,100 kg Chip conveyor weight: approx. 200 kg Good condition.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2001, jam operasional: 18.391 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 11160000853, jarak pergerakan sumbu X: 600 mm, jarak lintasan sumbu Y: 700 mm, jarak gerak sumbu Z: 600 mm, produsen pengendali: Heidenhain, kecepatan spindel (maks.): 12.000 rpm, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel X-axis: 600 mm Travel Y-axis: 700 mm Travel Z-axis: 600 mm Spindle speed max.: 12,000 rpm Feed rate X-axis: 20 – 15,000 mm/min Feed rate Y-axis: 20 – 15,000 mm/min Feed rate Z-axis: 20 – 15,000 mm/min Rapid traverse X-axis: 40 m/min Rapid traverse Y-axis: 40 m/min Rapid traverse Z-axis: 40 m/min Position measuring system resolution X-axis: 0.001 mm Position measuring system resolution Y-axis: 0.001 mm Position measuring system resolution Z-axis: 0.001 mm Increment unit X-axis: 0.001 mm Increment unit Y-axis: 0.001 mm Increment unit Z-axis: 0.001 mm Position tolerance X-axis: 0.01 mm Position tolerance Y-axis: 0.01 mm Position tolerance Z-axis: 0.01 mm Nwodpfxsy Ni Aao Aa Ueg Tool holder: SK 40 NC rotary table clamping surface diameter: 630 mm Max. table rotation speed: 10.7 rpm Table feed: 3,600/min Measuring system resolution, table: 0.001 MACHINE DETAILS Control manufacturer: Heidenhain Indicated spindle hours: 18,391 h Operating voltage: 400 V Frequency: 50 Hz Rated current: 80 A Connected load: 44 kVA Dimensions & Weight Dimensions (L x W x H): 5,500 x 4,500 x 2,500 mm Machine weight: 10,000 kg EQUIPMENT 60-position tool changer Chip conveyor Cooling unit

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2006, jam operasional: 13.006 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 190433, panjang pembubutan: 1.050 mm, diameter pembubutan: 660 mm, jarak pergerakan sumbu X: 580 mm, jarak lintasan sumbu Y: 150 mm, jarak gerak sumbu Z: 1.050 mm, model controller: Mazatrol Matrix, de-hu-01 Njdpfx Ajy Slqfsa Uewg

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1999, jam operasional: 12.500 h, Fungsionalitas: berfungsi sepenuhnya, model controller: OSP 7000M, Perlengkapan: konveyor serpihan, b9f38d77 Nwedoy S Sw Ejpfx Aa Ujg

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2008, jam operasional: 10.500 h, Fungsionalitas: berfungsi sepenuhnya, diameter pembubutan: 630 mm, jarak pergerakan sumbu X: 580 mm, jarak lintasan sumbu Y: 160 mm, jarak gerak sumbu Z: 935 mm, model controller: Okuma OSP P200L, TECHNICAL DETAILS Swing diameter over slide: 630 mm Max. machining diameter: 630 mm Distance between centers: 900 mm Travel X-axis: 580 mm Travel Y-axis: 160 mm Travel Z-axis: 935 mm Travel W-axis: 1,000 mm Travel C-axis: 360° Travel B-axis: -30° to 195° Main spindle speed: 3,800 rpm Counter spindle speed: 5,000 rpm Milling spindle speed: 6,000 rpm Rapid traverse X-axis: 40,000 mm/min Rapid traverse Z-axis: 40,000 mm/min Rapid traverse Y-axis: 26,000 mm/min Rapid traverse W-axis: 20,000 mm/min Rapid traverse C-axis: 200 rpm Rapid traverse B-axis: 30 rpm Max. tool diameter: 90 mm Max. tool diameter (without adjacent tools): 130 mm Max. tool length: 300 mm Max. tool weight: 10 kg MACHINE DETAILS Number of axes: 6 Control: Okuma OSP P200L Dimensions & Weight Nwedpfx Aey S Swxsa Ujg Setup area: 4,340 × 2,050 mm Height: 2,600 mm Weight: 10,300 kg Spindle hours: 10,500 h EQUIPMENT Documentation/Manual Infinitely variable speed control Marpos tool sensor Chip conveyor & coolant system with small belt filter unit ATC 60 system HSKA-63 (60 tools)

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2001, jam operasional: 18.500 h, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 700 mm, jarak lintasan sumbu Y: 800 mm, jarak gerak sumbu Z: 700 mm, model controller: CNC OSP 100M, kecepatan rotasi (maks.): 5.000 rpm, 01 Nsdpfx Aaey S S U Do Ujwg

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1986, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 1.250 mm, jarak lintasan sumbu Y: 650 mm, jarak gerak sumbu Z: 750 mm, model controller: Heidenhain iTNC 320, beban meja: 2.500 kg, kecepatan rotasi (maks.): 6.000 rpm, de-to-hu-it-lt-lv-nb-nl-pl-001 Nsdpfoy Sxmtjx Aa Uswg

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2017, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 172822005, jarak pergerakan sumbu X: 600 mm, jarak lintasan sumbu Y: 500 mm, jarak gerak sumbu Z: 500 mm, model controller: Heidenhain TNC530i, kecepatan spindel (maks.): 18.000 rpm, de.hu.1 Nwsdpfsy S Ua Nex Aa Ueg

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1999, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 18275, jarak pergerakan sumbu X: 650 mm, jarak lintasan sumbu Y: 650 mm, jarak gerak sumbu Z: 650 mm, model controller: Siemens Sinumerik 840D, kecepatan spindel (maks.): 10.000 rpm, Tanpa harga minimum – penjualan dijamin kepada penawar tertinggi! Mesin berasal dari produksi komponen presisi tinggi untuk meja putar CNC. Bukan untuk pekerjaan subkontrak. DETAIL TEKNIS Perjalanan sumbu X: 650 mm Perjalanan sumbu Y: 650 mm Perjalanan sumbu Z: 650 mm Kecepatan spindle berkecepatan tinggi maks.: 15.000 rpm Koneksi spindle: HSK-A63 Pendinginan alat internal tersedia Jumlah posisi magazin alat: 120 Akurasi sirkularitas: 5 µm DETAIL MESIN Kontrol: Siemens Sinumerik 840D Jumlah sumbu: 4 PERLENGKAPAN Dokumentasi Konveyor serbuk Nwodpfx Aoy Rmz Asa Uog Tangki coolant Dua unit penukar palet + menara penyimpanan dengan 6 posisi untuk hingga 8 palet Catatan: Mesin telah dimatikan oleh teknisi listrik berwenang dan dipersiapkan secara profesional untuk pengiriman.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1998, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 18234, jarak pergerakan sumbu X: 650 mm, jarak lintasan sumbu Y: 650 mm, jarak gerak sumbu Z: 650 mm, model controller: Siemens Sinumerik 840D, kecepatan spindel (maks.): 15.000 rpm, Tanpa harga minimum – penjualan dijamin kepada penawar tertinggi! Mesin berasal dari produksi komponen presisi tinggi untuk meja putar CNC. Bukan untuk produksi subkontrak. RINCIAN TEKNIS Perjalanan sumbu X: 650 mm Perjalanan sumbu Y: 650 mm Perjalanan sumbu Z: 650 mm Kecepatan maksimum spindle berkecepatan tinggi: 15.000 rpm Dudukan spindle: HSK-A63 Pendinginan alat internal memungkinkan Nwedpsy Rmnvefx Aa Ujg Jumlah slot magazin alat: 120 Akurasi lingkar: 5 µm RINCIAN MESIN Kontrol: Siemens Sinumerik 840D Jumlah sumbu: 4 PERLENGKAPAN Dokumentasi Konveyor serpihan Tangki pendingin cair (KSS) Pengganti palet ganda Catatan: Mesin ini telah dimatikan oleh teknisi listrik yang berwenang dan dipersiapkan secara profesional untuk transportasi.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2006, nomor mesin/kendaraan: BM0000029, Fungsionalitas: berfungsi sepenuhnya, model controller: WINDOWS XP, jumlah spindel: 42, tinggi pelat: 60 mm, panjang pelat: 2.800 mm, lebar pelat: 1.300 mm, No reserve price - guaranteed sale to the highest bidder! Vertical CNC machining center for drilling, milling, and doweling, with additional robotic arm for material handling! Collection of the machine must take place between 10.06.26 and 30.06.26! The machining center comprises two units as follows: 1. BIESSE BREMA VEKTOR 15-18 R Njdpjy Uvnajfx Aa Uswg Working area X-axis: 2,800 mm Working area Y-axis: 1,300 mm Number of controlled axes: 3 axes Total number of drilling spindles: 42 Total tool changer positions: 10 Maximum panel pass-through height: 60 mm Automatic panel loading system Automatic panel stacking system Drilling units Drilling unit 1: Horizontal drilling spindles in X Number of horizontal drilling spindles in X: 9 Drilling unit 2: Horizontal drilling spindles in Y Number of horizontal drilling spindles in Y: 9 Drilling unit 3: Vertical drilling spindles Number of vertical drilling spindles: 24 Milling spindle Number of milling spindles: 1 Number of controlled axes milling spindle: 3 Automatic tool change: Yes Number of tool magazine positions: 10 Control and Safety Control system: WINDOWS XP Machine programming software: BKEEPER Safety standard: EC marking Safety system: Safety light barriers 2. KUKA KR 180 L100-2 K 2000 Maximum panel width: 1,300 mm Maximum panel length: 2,800 mm Maximum payload: 100 kg Number of controlled axes: 6 Arm reach: 3,700 mm Number of panel stacking stations: 3 Control system: KR C 2 EQUIPMENT Automatic panel loading system Automatic panel stacking system Honeywell barcode reader Safety net on the machine The machine is sold and delivered in its actual and legal condition ("as seen and approved") based on photographic documentation and technical/commercial descriptive documents. The buyer has the right to inspect the goods prior to collection and assumes responsibility for installation, securing, and operation at the destination site. External reference: 8530

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2011, nomor mesin/kendaraan: 0-201-50-1289, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 6.000 mm, jarak lintasan sumbu Y: 1.400 mm, model controller: POWERCONTROL PC 85, tinggi pelat: 300 mm, kecepatan spindel (maks.): 24.000 rpm, No reserve price – guaranteed sale to the highest bidder! CNC Machining Center for Milling, Drilling, and Edge Banding! Collection of the machine must take place between 10.06.26 and 30.06.26! TECHNICAL DETAILS Working area X-axis: 6,000 mm Working area Y-axis: 1,400 mm Max. panel passage height: 300 mm Travel speed X-axis: 80 m/min Travel speed Y-axis: 80 m/min Travel speed Z-axis: 30 m/min Number of controlled axes: 5 axes Number of work zones: 4 Maximum edge height: 65 mm Number of drilling units: 1 Total number of drilling spindles: 21 Total vertical + horizontal spindles: 25 Number of milling spindles: 2 Total tool changer positions: 77 Barcode reader model: DATALOGIC Work table and workpiece clamping Number of rails: 12 Number of pumps: 1 Vacuum pump flow rate: 300 m³/h Positioning via NC Nwjdpfxjy Uviwe Aa Ujg Vacuum cups for workpiece clamping Vacuum cup positioning via NC Drilling unit Drilling unit 1: Top Vertical drilling spindles: 21 Horizontal drilling spindles in X: 2 Horizontal drilling spindles in Y: 2 Total vertical + horizontal spindles: 25 Milling units Milling spindle 1: Top Number of controlled axes for milling spindle 1: 5 Motor power milling spindle 1: 15 kW Speed milling spindle 1: 24,000 rpm Automatic tool changer Milling spindle 2: Top Number of controlled axes for milling spindle 2: 4 Automatic tool changer milling spindle 2: Yes Motor power milling spindle 2: 11 kW Speed milling spindle 2: 12,000 rpm Edge banding unit Number of edge banding units: 1 Max. panel height: 60 mm Model: POWER EDGE 360° Positioning: Mounted on the main frame of the machine Number of positions edge band magazine: 2 Gluing unit Glue pot for hot-melt adhesive Premelter for hot-melt adhesive Tool magazines Number of tool magazines: 4 Positions tool magazine 1: 72 Position tool magazine 1: At the rear of the machine Positions tool magazine 2: 2 Position tool magazine 2: At the rear of the machine Positions tool magazine 3: 2 Position tool magazine 3: At the rear of the machine Positions tool magazine 4: 1 Use tool magazine 4: Only for saw unit D:350 mm MACHINE DETAILS Control system: WINDOWS 10 Machine programming software: POWERCONTROL PC 85 EQUIPMENT Pod and rail work table NC-positioned workpiece clamping Vacuum cups Vacuum pump Drilling unit top 2 milling spindles POWER EDGE 360° edge banding unit Glue pot for hot-melt adhesive Premelter for hot-melt adhesive Edge band magazine 4 tool magazines DATALOGIC barcode reader Safety net Chip conveyor CE marking Safety mats The machine is sold and delivered in its actual and legal condition ("as seen and approved") based on photo documentation and technical/commercial documents of descriptive nature. The buyer has the right to inspect the goods prior to collection and assumes responsibility for installation, securing, and operation of the machine at the place of destination. External reference: 8527