Beli Sema Maschinenbau Sema Maschinenbau Set Packer (2018) bekas (11.980)

Kondisi: bekas, Tahun pembuatan: 2018, Overview The packer was manufactured and commissioned in 2018 by the German company Sema Maschinenbau GmbH. Until now, it has been used in a filling line for fresh milk in glass bottles at a German dairy plant. The line’s capacity was 7,700 bottles per hour. Due to increased demand for milk in glass bottles in recent years, the owner decided to purchase a new system with a higher capacity. Therefore, this machine has become available. The machine is in very good condition, as it is relatively new and has only a low number of operating hours. Technical Data: Performance: 695 crates (with 12 bottles each) per hour 1333 crates (with 6 bottles each) per hour Formation: 2x3 (1L bottles) 4x6 (0.5L bottles) Ppsdpfx Ansl Hx Dmswet Gripper heads: for wide-neck bottles (adjustable if needed)

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, Complete valve grinding set for professional engine reconditioning – packed in three sturdy transport cases. Includes the actual valve grinding machine, a comprehensive set of valve seat cutters/reamers in various diameters, as well as adapters and accessories (see photo – cases open). Ideal for engine reconditioning workshops, automotive specialists, marine/stationary engine service, vintage vehicle restoration, railway workshops, and industrial repair facilities. The complete set is difficult to find new as separate items and is therefore in high demand. According to the equipment register (inv. no. 200004), manufacturer: EFCO Maschinenbau GmbH, model: Valval – please verify on the nameplate on-site. Test run/inspection possible at any time by appointment. Scope of delivery (3 transport cases): 1. Valve grinding machine (main grinding unit) 2. Valve seat tools/cutter set 3. Adapters, reamers, and accessories Technical data: - Power supply: 230 V (please check on site) Ppedpfezachvsx Anwet - Application: Valve grinding, valve seat cutting, valve guide machining - Completeness: apparently complete as per photo, please verify against the original parts list on site Collection/Shipping: Self-collection by car/van (3 cases, each approx. 20–30 kg). Shipment by freight carrier possible.

Kondisi: baru, Tahun pembuatan: 2024, Stock item available for immediate delivery comprising: > Stop rail, 3 m long > 2 complete stops Ppedpfx Anefnp Swjwet > 1 measuring scale, right-to-left > 1 measuring scale, left-to-right > Mounting screws - The wooden base rail 50 x 45 mm, onto which the stop rail is mounted, is not included in the scope of delivery.

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2024, consisting of: Ppodpfsfrnpnjx Anwot > Stop rail, 2 m long > 2 complete stops > 1 measuring scale, right to left > 1 measuring scale, left to right > Mounting screws - The wooden base rail 50 x 45 mm, onto which the stop rail is mounted, is not included in the scope of delivery.

Tahun pembuatan: 2015, Kondisi: baik (bekas), Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: A-150016, AUTOMATED ADHESIVE APPLICATION MACHINE, GANTRY SYSTEMS, AND AUTOMATED INSERTING UNIT FOR METAL SHEET REINFORCEMENTS This system is part of a larger production line; please refer to our other listings for more details. The offered equipment includes 3 staging areas for cover layers, an automated adhesive application machine for sandwich panel bonding, a conveyor belt for manual assembly of inlays/ribs, gantry systems for handling the cover layers, and an automated inserting unit for metal sheet inlays/reinforcement points. COMPONENT DIMENSIONS (from previous production): L/W min: 2000mm x 1500mm L/W max: 8000mm x 2500mm H min: 12mm H max: 60mm MATERIALS (from previous production): GRP, Sheet metal, Plywood, Timber/PU battens, PVC, Styrofoam ADHESIVE GANTRY FOR CONTOUR & SURFACE BONDING (of cover layers & inlays): Number of area needle valves: 104 Podpsyt Nm Sefx Anwept Number of contour needle valves: 1 Adhesive system: 1K-PUR Number of nozzles in water spray unit: 8 AUXILIARY UNITS: Climate-controlled cabin (for storage of 1K-PUR adhesive) Vacuum pump for gantry systems Punching unit

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2018, A wrapper and packer for glass bottles from a bottling line are available. Bottle formats: 500ml/1000ml, crate formats: 6-pack/12-pack, pallet type: Euro pallet, height of loaded pallet min./max.: 500mm/1800mm, wrapping capacity: 60 pallets/h. Documentation available. On-site inspection possible. Ppodpfxjttbdwo Anwjt

Kondisi: bekas, Tahun pembuatan: 2018, Looking for a gantry milling machine? With X-travel from 2 to 15 meters, Y-travel up to 4 meters, and Z-travel up to 2 meters, we offer you a versatile selection of machines for various machining requirements. Whether CNC universal heads, W-axis, rotary tables, tool changers, or controls from renowned manufacturers like Siemens, Fanuc, and Heidenhain – our extensive range of accessories ensures you maximum flexibility and efficiency. Have a look at the PDF catalog below! Discover the ultimate precision and robustness of our refurbished CORREA gantry milling machines, carefully overhauled by our experts in Spain. These machines have been inspected to the highest standards and guarantee you premium machining quality. A standout example is our in-stock pre-owned CNC gantry milling machine VM 2018, equipped with the proven Heidenhain control system. With impressive performance data and detailed technical features, this machine offers everything you need for precise and efficient machining. Pedpfohx R Dkex Anwept x-travel: 2300 mm y-travel: 2000 mm z-travel: 1000 mm table size: 2300 x 1600 mm T-slots (width x pitch x quantity): 8 x 22 x 180 mm max. table load: 8 t distance between columns: 1840 mm distance spindle nose to table: 180~1180 mm spindle motor: 22/46 kW torque at spindle: 140.1/286.5 Nm (S6-25%) spindle taper: SK 50 spindle speed: 10000 rpm (direct drive) rapid traverse X,Y: 20000 mm/min rapid traverse Z: 15000 mm/min milling feed range: 1~10000 mm/min machine dimensions (LxWxH): 7027 x 5217 x 4339 mm total power requirement: 60 kVA machine weight approx.: 25 t CNC control: Heidenhain TNC 620 chip conveyor with chip bin: 2 spiral, 1 hinged belt IKZ: 20 bar CE-compliant: certified by TÜV Used CNC gantry milling machine with HEIDENHAIN 620 TNC control and extensive accessories, featuring: - Monoblock cast-iron machine bed and monoblock crossbeam for maximum rigidity and precise machining results. - Complete structure analyzed by FEM to optimize rigidity and precision. - P-class linear guide feed rollers allow maximum loading with a low coefficient of friction (0.003–0.006). They ensure smooth operation thanks to optimized roller circulation and guidance, which also reduces energy consumption. - Double-nut C3 ball screws guarantee precise milling even under heavy loads. - Direct drive spindle with 10,000 rpm and SK50 tool holder. - Spindle motor power 22/46 kW (S6-25%). (22 kW continuous, 46 kW up to 30 min overload). - Spindle torque 140.1/286.5 (S6-25%) Nm. - Two spiral conveyors and one chain chip conveyor for efficient chip removal. All essential components from well-known European manufacturers, ensuring reliable, short-term, and long-term spare parts availability. Don't miss the chance to optimize your production processes and invest in premium milling technology. Experience the difference our gantry milling machines make – reliable, durable, and ready to tackle your most demanding tasks. Contact us today for expert advice. Other machines in stock on request.

Tahun pembuatan: 1998, Kondisi: bekas, Technical details: Profile width: 50 mm Working height: 950 mm Interface: RS 232 Pinout Window profile processing machine Suitable for materials such as PVC, aluminium and wood windows in a continuous processing operation. Materials are conveyed via a pneumatic transport and clamping system. The system consists of two workstations (machines), one electrical control cabinet, an operator panel, and transport units. Also included are a stand with a vibrating transport system, chip conveyor unit, and a stand with acknowledgement printer. Our photos are shown first at the current location, followed by additional photos demonstrating the system prepared for transport and for sale. Workstation No. 1 (Machine 1): - Sawing station with saw blade Ø 400 x 4.5mm - Drilling unit with collet chuck (vertical, upward) - Drilling unit with collet chuck (horizontal) - Drilling unit with collet chuck (vertical, downward) - Twin drilling unit with collet chuck (vertical, downward) - 45° drilling unit with collet chuck (upward) Ppsdpfx Aju Ibuwjnwet Workstation No. 2 (Machine 2): - Drilling unit with collet chuck for screw connections (vibratory bowl) (vertical, upward) - Horizontal milling spindle with 11 disc cutters - Triple drilling unit with collet chuck (vertical, downward) - Triple drilling unit with collet chuck (vertical, upward) - Triple drilling unit with collet chuck (horizontal) 2 motor-driven transport units: - LxWxH: 5,650 x 2,400 x 1,000 mm - Track width 1,980 mm 2 motor-driven transport units: - LxWxH: 2,150 x 2,750 x 1,050 mm - Track width 2,300 mm

Kondisi: bekas, Tahun pembuatan: 2014, en-technical-details-transfer-press-line-vehicle-sockets-product ion Ppedpju Nfttefx Anwst

Kondisi: bekas, Detail teknis: Panjang batang: maks. 30 mm Kapasitas: 600 unit/menit Diameter kawat maks.: 5 mm Area kerja: 30 mm Dimensi panel kontrol PxLxT: 1,45x0,55x2,1 m Dimensi mesin: 2,95x1,5x2,15 m Dimensi haspel: 1,15x1,15x1,15 m Press mekanik untuk pembentukan dingin Untuk produksi rivet, pin rantai, baut, atau produk khusus. (BUKAN SEKRUP menurut produsen) Instalasi merupakan pesanan khusus dan belum pernah digunakan (seperti baru). Podpsu Nfrcefx Anwept Aksesori: - Haspel - Manual pengoperasian Mesin dapat didemonstrasikan. i.D.

Kondisi: baru, Cutting width 115 and 82 mm Cutting height 55 mm Motor power 2.0 kW Machine weight approx. 45 kg Mitre Saw KS for (glass) strip cutting with manual and electronic length stop suitable for wood, PVC, aluminium ----- Brief manufacturer description: - Crosscut and mitre circular saw for precise and user-friendly trimming in the molding/strip sector - Robust cast iron construction - A double ball-bearing shaft acts as the swing pivot below the material support table, optimizing material cutting. Cutting always occurs at the rear upper side. - Quick mitre adjustment up to 45° - Re-adjustable fixed stops at 90° and 45° - Upper blade guard can be connected to extraction system ----- Technical Data: Motor: 400 V / 2.0 kW Speed: 2,800 rpm Max. cutting width: 115 mm (at 90°); 82 mm (at 45°) Max. cutting height: 55 mm Mitre range: 45° - 90° - 45° Saw blade Ø: 250 mm Extraction connection Ø: 45 mm ----- Technical Description: Pos. 1.1 Crosscut and mitre saw type KS, 2 kW, 400 V, 30/40 mm blade mount Pos. 1.2 Pivot point LEFT Pos. 1.3 Pneumatic material clamping for KS, both sides of blade, 2 horizontal pneumatic cylinders, activated via roller valve during saw stroke, can be switched off Pos. 1.4 Carbide-tipped circular saw blade for wood, 250 x 2.8 x 40 mm 80 teeth, negative angle ----- Price for the above-mentioned machine on request! plus packaging and shipping ----- Options at extra cost: Pos. 1.5: EUR 1,270.00 Digital electronic angle display for one axis, crystal display, 1.5 V battery supply, reading via magnetic tape and sensor, resolution 0.1° Pos. 1.6: EUR 695.00 Machine stand for mitre saw KS ----- Pos. 2.1: Electronic length stop with support plate EUR 7,290.00 Electronic length stop type RLE 2.0 m – with support plate Mounting side: LEFT Ppodpfx Anoy T R Sqswot Electronic length stop system for strip cutting Travel distance 1.8 m, total length 2.0 m 10” touch display, connection 230 V Feed speed 40 m/min Direct measurement system – repeatability ± 0.1 mm Operating modes: (1) automatic absolute stop, (2) cut lists, (3) pusher cut lists, (4) incremental, (5) fine adjustment Program memory for up to 999 cut lists USB import and direct processing of cut lists at terminal Stop can be folded backwards With support foot Pos. 2.2: EUR 295.00 Support 2.0 m, right side, 110 mm wide, with support leg ----- Pos. 3.1: Manual length stop EUR 600.00 Length stop 2.0 m, left, with 110 mm wide support, with scale, stop carriage foldable and with support leg Pos. 3.2: EUR 295.00 Support 2.0 m, right side, 110 mm wide, with support leg ----- (technical data as per manufacturer – subject to change!) All prices quoted are net. Plus statutory VAT.

Kondisi: bekas, Terowongan Pengeringan Cat Frei AG Ppodsy Ux Rqepfx Anwot Harap diperhatikan bahwa item dalam lot 30466-430 ini juga ditawarkan secara bersamaan dalam lot kombinasi 30466-425 sebagai satu lini lengkap. Bagian-bagian terpisah dari lini lengkap 30466-425 ditawarkan sebagai lot individual 30466-426 hingga 30466-433. Penawar dapat menawar untuk lini lengkap dan/atau untuk lot individual. Penjualan bersyarat dan tunduk pada persetujuan penjual. Kemungkinan besar penjual akan menyetujui tawaran agregat tertinggi untuk lini ini, baik sebagai satu lot ataupun sebagai lot individual. Penawar yang berhasil akan diberitahu dalam waktu 2 hari kerja.

Kondisi: bekas, de-to-hu Podpoy Ta Hdsfx Anwjpt

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, berat keseluruhan: 18.000 kg, konfigurasi gandar: 2 gandar, inspeksi berikutnya (TÜV): 09/2026, panjang ruang muatan: 7.300 mm, Tahun pembuatan: 2018, Perlengkapan: unit pendingin,

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, jarak tempuh: 622.000 km, daya: 308,91 kW (420,00 hp), pendaftaran pertama: 09/2018, jenis bahan bakar: diesel, konfigurasi gandar: 6x2, inspeksi berikutnya (TÜV): 09/2026, bahan bakar: diesel, tipe perpindahan gigi: otomatis, jumlah gigi: 12, kelas emisi: Euro 6, panjang ruang muatan: 73.000 mm, Tahun pembuatan: 2018,

Tahun pembuatan: 2000, Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, 1 Ppedpoxl Ediefx Anwst

Kondisi: hampir baru (bekas), TECMA Sealed Cups Dual Packer Kemasan karton x2, x4, x6 Tahun pembuatan 2013 Kondisi seperti baru Dibuat di Perancis Podpfx Aoyrx Uvonwopt

Kondisi: hampir baru (bekas), TETRA PAK PENGEMAS KARTON CBP 32 VERSI 400 TAHUN PEMBUATAN 2010 Pedpsya I Sgofx Anwjpt HANYA 2177 JAM OPERASI!! MESIN PENGEMAS MULTI UNTUK 200/250/1000 ml KONDISI SEPERTI BARU LOKASI - POLANDIA SIAP DIKIRIM

Kondisi: bekas, Tahun pembuatan: 2018, Used machine Year of manufacture: 2018 Special feature: Machine for edge heights up to 100 mm! Condition: Factory-inspected by Lange Maschinenbau Equipment and technical specifications: - Machine table with 13 support rollers for improved workpiece guidance - Edge feed, synchronized with conveyor belt feed - Edge thickness adjustable via digital counter - Pneumatic roller separation with knife (for cuttable edges) - Three pressure rollers - Conveyor feed: - 0.25 kW - Approx. 1250 mm long - Approx. 6.0 m/min - 50 mm wide toothed belt with thick, workpiece-friendly rubber coating - Digital counter for height adjustment - Direct glue application to the workpiece: Drip-proof glue pot with bottom glue supply and quick heat-up time after machine standstill - Flush cutting unit: - For workpiece front and rear edges - Automatic sensing on the workpiece - Pneumatic cutting with knife for cuttable edges - Flush trimming unit: - With vertical scanning and horizontal guidance - Reproducible adjustment via digital counters - 2 powerful 0.4 kW high-frequency motors - Infinitely variable speed from 4000 to 18000 rpm - Cutter Ø 70 mm, Z4, radius 2mm/15° - Central extraction port Ø 100 mm - 2 chip extraction covers with hose Ø 60 mm - Automatic height adjustment of the top cutter with conveyor feed - Continuous workpiece support, approx. 1800 mm long - Extension workpiece support rail, approx. 300 mm extendable - Rotatable foil carousel Ø: 800 mm - Workpiece width: min. approx. 80 mm - Workpiece thickness: 10 – 100 mm - Workpiece length: min. approx. 220 mm Pjdpfswka S Iex Anwspt - Edge thickness: 0.4 – 2.0 mm - Roller separation: max. 1.0 x 55 mm, 2 x 45 mm - Glue pot heating power: 2.7 kW - Heat-up time: approx. 10 minutes - Working height: approx. 880 mm - Power connection: 400V, 50 Hz, 3Ph + N - Total power: 3.8 kW - Pneumatic connection: 6 bar Dimensions (without foil carousel): approx. 1800 x 700 x 1300 mm Weight: approx. 260 kg Availability: Short notice Location: Flörsheim

Kondisi: baru, Tahun pembuatan: 2025, Plasma cutting system for pipes and profiles Machine for plasma cutting of pipes and profiles. The cutting contour is defined and created using CAM software. The generated CNC code is then transferred to the machine via USB or network. The program can be easily selected on the 12" touch display. After manual loading of the workpiece, the automatic cutting process is started. - Pipe length: max. 6000mm - For round pipes up to max. OD = 220mm - For square tubes up to max. 152.4 x 152.4mm (6" x 6") - Maximum pipe weight: 250KG - 4-jaw chuck - Side loading possible, secured by light curtain - Fully automatic cutting operation - Industrial PC control with 12” touch display - Data import via USB and LAN - Power supply: 400V 3-phase, 2KW - Dimensions: 690 x 100 x 180cm - Weight: approx. 1000KG Made in Germany Podpjgu Nmhsfx Anwjpt The images show an older machine.

Kondisi: baru, Tahun pembuatan: 2025, Fungsionalitas: berfungsi sepenuhnya, Plasma cutting system for pipes and profiles Machines for plasma cutting of pipes and profiles. The cutting contour is defined and created via CAM software. The generated CNC code is then transferred to the machine via USB or network. The program can be easily accessed using the 12" touch display. After manually loading the workpiece, the automatic cutting process is started. - Pipe length: max. 6,000 mm - For round pipes up to max. OD = 150 mm - For square tubes up to max. 101.6 x 101.6 mm (4" x 4") - Maximum pipe weight 150 kg - 4-jaw chuck - Side loading possible, secured by light curtain - Fully automatic cutting sequence - Industrial PC control with 12" touch display - Data import via USB and LAN - Power supply: 400V 3-phase, 2 kW - Dimensions: 690 x 100 x 180 cm - Weight: approx. 800 kg Made in Germany Ppodpsg Dvdcofx Anwet The images show an older, larger machine.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2023, Mandrel Bending Machine S4501 ----- For the production of tube geometries with bending radii from 1.5xD → Maximum bending capacity tube 42.4 x 3.25 mm (steel max. Re 240 N/mm²) → Maximum bending capacity tube 30 x 30 x 3 mm Podpfx Anjtr U Hlewopt → Maximum bending capacity tube 42.4 x 2 mm (stainless steel 0.2 = 260 N/mm²) → Total connected load 3 kW → Tube loading length approx. 1.5 m Robust and durable steel construction. Maintenance-free servo drive for bending, feed, and rotation axes. The touchscreen control enables straightforward and intuitive programming and operation of the machine. After loading the tube, it is secured by the chuck in the carriage. This enables precise positioning of the tube, ensuring contour-accurate geometries. Standard features include geometry control before the bending process: if the bending process is initiated at the wrong position, the machine will not grant approval, thus eliminating operator error. Optional features add convenience, boost output, and therefore increase system efficiency. Data exchange with the optional pipe calculation software TBS-3D (PC version) is via USB stick or network. Existing pipe geometries can be imported using the software. Standard Equipment: → Servo drive for bending axis 1.5 kW → Adjustable rotational speed → Left-hand bending direction → Bending angle resolution 0.1° → Max. bending radius 120 mm → Bending shaft diameter 50 mm → Servo-driven feed → Servo-driven rotation → Three-jaw chuck for securing the tube in the carriage → Pneumatic tool retraction Hydraulics: → Hydraulic tube clamping with adjustable clamping pressure → Programmable early mandrel retraction PLC Control: → 10" color touchscreen → ETH 10/100, X2X Link, 2x USB → Foot pedal operation → Data transfer via LAN network or USB → Material database Unique graphic programming: Simple geometries can be calculated directly on the machine. The controller directly calculates the feed values and bending angles after entering length and angle values. Power supply: 400V 16A Dimensions: L: 2.3m x W: 1m x H: 1.4m Weight: approx. 1200 kg

Kondisi: bekas, Tahun pembuatan: 2017, Diameter pipa (maks.): 80 mm, panjang mandrel: 4.500 mm, Mandrel bending machine S8004 ----- For the production of dimensionally accurate tube geometries with bending radii of up to 1.5xD → Maximum bending capacity tube 76 x 4 mm (400 N/mm²) → Maximum bending capacity tube 60 x 60 x 3 mm (400 N/mm²) → Maximum bending capacity tube 76 x 2.9 mm (stainless steel) → Total connected load 7 kW → Tube feed length 4.5 m Robust and durable steel construction in a rigid connection – no torsion-prone design caused by, for example, a split construction of bending head and mandrel carrier. Maintenance-free electromechanical drive of the bending axis. The control’s touch display allows for easy and intuitive programming and operation of the system. Once the tube is fed in, it is clamped in place in the carriage by the chuck, ensuring exact tube positioning and enabling the production of dimensionally accurate geometries. Also standard is a tube geometry check before the bending process: If the bending process is started at the wrong position, the machine does not grant approval, thus preventing operator errors. Optional additional features provide greater comfort and increase output, thereby improving system efficiency. Data exchange from the optional tube calculation software TBS-3D (PC version) is performed via USB stick or by FTP access of the computer to the machine control. USB or LAN (RJ45) ports are standard. Existing tube geometries can be easily and quickly converted, e.g., via the STEP format. Standard features: → Electromechanical drive of the bending axis 4 kW → Speed 2.9 rpm (=17°/sec) Ppedpettah Rjfx Anwst → Left-hand bending direction → Bending angle resolution 0.1° → Max. bending radius 200 mm → Bending shaft diameter 50 mm → Electronic length measurement ±0.1mm → Electronic rotation measurement ±0.1° → Manual stop system (longitudinal overrun stops) → Manual indexing system (15° rotational increments) → Three-jaw chuck for securing the tube in the carriage → External control panel PLC control system: → 10.1" touchscreen → ETH 10/100, X2X Link, USB → Foot pedal operation → Data transmission via network (W)LAN or USB → Material database Unique graphical programming: Simple geometries can be calculated directly on the machine. After entering length and angle, the control automatically calculates the feed values and bending angles. Hydraulics: → Hydraulic power 3 kW → Hydraulic tube clamping with adjustable clamping pressure → Programmable premature mandrel retraction Options (available as additional equipment): → Variable bending speed via frequency inverter or servo motors → Automatic tool retraction (manual or controlled) → Pneumatic chuck → Automatic mandrel lubrication → Pneumatic stop system (length + rotation) → Mobile version (with rollers) → Radius extension Photos show new machine.

Kondisi: bekas, Tahun pembuatan: 2018, Fungsionalitas: berfungsi sepenuhnya, 1 Pedpfex Ebzqsx Anwjpt

Kondisi: bekas, Technische Details: Weight: approx. 80 kg Machine dimensions (LxWxH): approx. 0.77 x 0.45 x 0.5 m BRUSHING MACHINE for deburring / brushing of tube ends / welded profile tubes / tube bodies on the face side Ppedpfx Aswiu Smonwot