Beli Spinner Pusat Pembubutan Cnc bekas (14.268)

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2018, Fungsionalitas: berfungsi sepenuhnya, diameter pembubutan: 460 mm, kecepatan spindel (maks.): 3.500 rpm, lubang spindel: 86 mm, saluran batang: 78 mm, model controller: Fanuc 32iTB iHMI, lebar di tengah: 689 mm, 1 Rsdpfxozdrzxj Aa Ijw

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2010, jam operasional: 5.002 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: NT100JG0126, panjang pembubutan: 424 mm, diameter pembubutan: 370 mm, jarak pergerakan sumbu X: 380 mm, saluran batang: 52 mm, model controller: FANUC FS-31iA5 (MAPPS 4), DETAIL TEKNIS Panjang putar: 424 mm Diameter putar maks.: 370 mm (270 mm dengan revolver 2) Lubang batang: 52 mm Spindel putar-milling Spesifikasi pengindeksan penuh: Ya Perjalanan sumbu X: 380 mm Perjalanan sumbu Y: ± 105 mm Perjalanan sumbu Z: 460 + 155 mm (ATC) Sumbu B: ± 120º Kecepatan spindel: 12.000 rpm Daya penggerak: 9/5,5 kW Majalah alat Jumlah slot majalah: 38 Holder alat: Capto C5 Rjdpfx Aezf H Ezsa Iow Panjang alat maks.: 250 mm (210 mm untuk alat di bawah Ø70 mm) Diameter alat maks.: 70 mm / Ø130 mm (dengan/tanpa alat tetangga) Berat alat maks.: 5 kg Revolver bawah Perjalanan sumbu X: 155 mm Perjalanan sumbu Z: 610 mm Jumlah slot alat: 10 Kecepatan alat putar: 6.000 rpm Daya penggerak alat putar: 1,5/1,2 kW Spindel utama Kecepatan spindel: 6.000 rpm Daya penggerak: 11/7,5 kW Lubang spindel: 73 mm Jenis chuck: Chuck berlubang (8") Pabrikan: KITAGAWA Flens spindel: JIS A2-5 Torsi maks.: 223 Nm Spindel kedua Kecepatan spindel: 1.000 rpm Sumbu BW: 4 posisi tetap, 0º, -30º, -180º (-225º untuk pelepasan ke sabuk konveyor jika ada) DETAIL MESIN Kontrol: FANUC FS-31iA5 (MAPPS 4) Daya nominal potensial: 39,24 kVA Dimensi & Berat Dimensi (P x L x T): 2.705 x 2.425 x 2.385 mm Berat: 8.800 kg Jam operasional Dalam keadaan menyala: 54.061 jam Jam operasional spindel 1: 9.813 jam Jam operasional spindel 2: 5.002 jam PERLENGKAPAN Konveyor serpihan Lampu sinyal Pompa tekanan tinggi Peniup udara di luar spindel Sakelar kaki (ganda) untuk spindel utama dan spindel kedua

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2010, Fungsionalitas: berfungsi sepenuhnya, DMG MORI Mesin Bubut Horisontal CTX -310V3 ecoline - Tahun 2010 Kontroler: MAPPS (Mitsubishi) Diameter ayun maks: 330 mm Diameter ayun di atas carriage maks: 260 mm Diameter bubut maks: 200 mm Panjang 450 mm Chuck 8" Rodpfxsx Ty S Ts Aa Iew Turret 12 posisi (6 alat berpengerak) Pengindeksan sumbu C Alat bertenaga: 4.500 rpm Pengukur alat Tailstock Konveyor serpihan --- Video tersedia atas permintaan

Kondisi: hampir baru (bekas), Tahun pembuatan: 2024, jam operasional: 500 h, Fungsionalitas: berfungsi sepenuhnya, DN Solutions PUMA 4100LMA Diproduksi: November 2023 Hanya 550 jam waktu pemotongan aktual Unit kontrol FANUC i Plus / iHMI Revolver servo 12 stasiun 8 alat hidup (alat gerak) Sumbu-C Tailstock hidrolik yang dapat diprogram Diameter pembubutan maksimum: Ø550 mm Panjang pembubutan maksimum: 2.060 mm Jarak ayun di atas ranjang: Ø790 mm Kapasitas bar: Ø102 mm Berat benda kerja maksimum: 500 kg Perjalanan sumbu X: 352 mm Perjalanan sumbu Z: 2.155 mm Perjalanan cepat sumbu X: 16 m/menit Perjalanan cepat sumbu Z: 20 m/menit Chuck hidrolik 12 inci (315 mm) Hidung spindle: ASA A2-11 Kecepatan maksimum spindle: 3.000 rpm Daya motor utama (kontinu): 22 kW Daya motor utama (rating 30 menit): 37 kW Torsi maksimum spindle: 832 Nm Kecepatan alat hidup: 4.000 rpm Inkrementasi indeks sumbu-C: 0,001° Konveyor serpihan Ember serpihan Sistem pelumasan terpusat otomatis Sistem pendingin Manajemen usia alat Pemantauan beban spindle Manual Pulse Generator (MPG) Lampu kerja Rodpfx Aaezdarts Isw Dimensi mesin: 5.774 × 2.275 × 2.272 mm Berat mesin: 11.050 kg

Kondisi: baik (bekas), Tahun pembuatan: 2015, Ref.-No.: 10652 Produsen: DMG MORI Tipe: NT 4300 DCG 1000 S Tahun pembuatan: 2015 Jenis kontrol: CNC Kontrol: Fanuc F31iA5 Lokasi penyimpanan: Halberstadt Negara asal: Jepang No. mesin: NT430XXXX Panjang putar: 983 mm Daya spindle: 18,5 / 11 kW Sumbu X travel: 750 mm Sumbu Y travel: +-210 mm Sumbu Z travel: 1220 mm Diameter pemesinan maks.: 660 mm Jumlah posisi alat: 100 unit Konfigurasi alat: CAPTO C6 Pemegang alat: 70 unit Informasi tambahan: - Kontrol & teknologi pengukuran Redszh Hl Tspfx Aa Iow - Komputer kontrol: Fanuc F31iA5 - Sistem pengukuran alat: tersedia - Perlengkapan yang termasuk: - Sistem pendingin internal alat + pompa tekanan tinggi - Konveyor - Regulator - Pedal kaki untuk spindle utama dan sub - Lengan pengukur alat - Manual mesin Mesin dapat dilihat dalam kondisi terhubung listrik setelah penjadwalan.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2022, jam operasional: 850 h, Fungsionalitas: berfungsi sepenuhnya, panjang pembubutan: 610 mm, diameter putar di atas sled silang: 500 mm, diameter pembubutan: 725 mm, kecepatan spindel (maks.): 5.000 rpm, lubang spindel: 65 mm, jarak pergerakan sumbu X: 260 mm, jarak lintasan sumbu Y: 80 mm, jarak gerak sumbu Z: 610 mm, gerak cepat sumbu X: 30 m/menit, pergeseran cepat sumbu Y: 15 m/menit, pergerakan cepat sumbu Z: 30 m/menit, panjang pemakanan sumbu X: 260 mm, panjang umpan sumbu Y: 80 mm, panjang umpan sumbu Z: 610 mm, torsi: 250 Nm, saluran batang: 65 mm, Perlengkapan: dokumentasi / manual, kecepatan rotasi dapat diubah tanpa batas, For sale: As-new EMCO MAXXTURN 65-G2 SMY, year of manufacture 2022, equipped with Siemens Sinumerik ONE with ShopTurn control! CNC turning center for complete machining of turned/milled parts. Integrated spindle motors, counter spindle water-cooled (preloaded roller guides) with Y-axis, on both main and sub spindle. State-of-the-art control technology SINUMERIK ONE with ShopTurn conversational programming. Main spindle: • Max. bar capacity: 65 mm • Max. torque: 250 Nm • Spindle speed range: 0–5,000 rpm Counter spindle: • Drive power: 22 kW • Max. torque: 130 Nm • Spindle speed range: 0–7,000 rpm Turret: • 12-position VDI 30 radial turret with directional logic for up to 12 live tool holders - Max. drive power: 6.7 kW - Max. torque: 25 Nm - Max. speed: 5,000 rpm Y-axis: • Travel: +/-40 mm • Hollow clamping cylinder incl. draw tube • C-axis for both main and sub spindle Further features: • Sinumerik ONE / OPERATE control • 22" multi-touch display • SHOPTURN • 3D simulation • Remnant material detection • USB interface • Electrical cabinet air conditioning • Enhanced coolant system incl. high-pressure coolant pump (24 bar) • Chuck wash with an additional pump (3.5 bar) • Part ejector and flushing through sub spindle • Hydraulic unit • Interface for chip conveyor • Documentation and CE certificate Control language: German/English • Electronic handwheel • EMCO TOOL BREAKAGE AND WEAR MONITORING/SINUMERIK ONE • Alternating spindle speeds • SUB SPINDLE AS TAILSTOCK: This cycle enables utilization of the sub spindle with a mounted live center to support workpieces, allowing shaft parts to be clamped and machined on machines without a tailstock using the sub spindle. Max. pressure force is limited to 50% of the maximum axis force. • EMCO PROFI-NET ROBOT INTERFACE for robot integration, with HARTING connector. Signal exchange via Profinet, safety signals 2-channel / potential-free. • Digitization package for Sinumerik. Condition monitoring. • SIEMENS ONE INTERFACE for connection to MDE/BDE systems. Standard with the following information: - Machine on – AUX ON - Automatic mode - Production mode – program active - Program is running, override between 95-105% - Piece count impulse (M30) Redpfx Aaox E Dncj Iow - Programmable impulse (M300) 3D MACHINE DATA / MT65-G2: 3D data model of the machine included. Pneumatically actuated finished part catcher for gentle unloading of finished parts, transport into a catch box (standard) or onto a conveyor belt (optional). Max. finished part length: 175 mm Max. finished part diameter: 65 mm Max. finished part weight: 4.5 kg INTERFACE SL1200 HT65-DT/TT + MT65-1000 for connecting the EMCO SL1200 short bar loader. ...etc. Machine available immediately!

Kondisi: bekas, Tahun pembuatan: 2005, Technical Details: Turning diameter: 275 mm Turning length: 900 mm Spindle bore: 65 mm Drive power 100% duty cycle: 25/20 kW Spindle speeds: 1 - 5000 rpm Spindle diameter at front bearing: 110 mm C-axis: 1 - 500 rpm Number of tool carriers: 4 Turret: 1 X-axis: 290 mm Y-axis: 165 mm Z-axis: 360 mm B-axis: 360° Rapid traverse speed: 18/30 m/min Number of tools: 2x2 + 2x2 Number of driven tools: 2x2 + 2x2 mm Tool speeds: 8000 / 2000 rpm Drive power: 25% duty cycle 5.8 kW Tool holder: TRAUB 60 Turret: 2/3/4 X-axis: 170 mm Z-axis: 600/950 mm Y-axis: +/- 60 mm Rapid traverse speed: 18/15/30 m/min Number of driven tools: 10 mm Tool speeds: 1 - 6000 rpm Drive power: 25% duty cycle 5.8 kW Tool holder: DIN 69880 40 x 63 Total connected load: 95 kW Machine weight approx.: 16 t Space requirement approx.: 10.0 x 3.5 x 3.0 m with CNC TRAUB TX 8i, bar loader TRAUB Stamag DNH61 / 3000, Main and counter spindle with C-axis 1 vertical tool carrier with B-axis 3 turret tool carriers Extraction unit, coolant system with coalescence separator and chip conveyor 2 pcs. 3-jaw chucks SMW KNCS-N 170-43 Redpfx Aewp D Nboa Iew 2 pcs. HAINBUCH Spanntop collet chucks 40 pcs. various non-driven tool holders 6 pcs. various driven tool holders Spare parts package

Kondisi: bekas, Tahun pembuatan: 2014, nomor mesin/kendaraan: S6F143651, 1 Redpfsy U R Nxsx Aa Iow

Kondisi: sangat baik (bekas), Tahun pembuatan: 2010, Diameter chuck: 210 mm Maximum swing diameter over bed: 500 mm Swing diameter over cross-slide: 290 mm Turning diameter: 200 mm Distance between centers: 700 mm Turning length: 500 mm Travel - Y-axis: 80 (+/-40) mm Travel - X-axis: 190 mm Travel - Z-axis: 525 mm Spindle bearing diameter: 100 mm Bar capacity: 65 mm Spindle bore: 73 mm Spindle speed: 6000 rpm Turret stations: 12 Redpfxszhpamj Aa Iow Driven tool power: 4.18 kW Driven tool speed: 5000 rpm Tool holding system: VDI 30 Control: Siemens 840D Total power requirement: 20 kW Machine weight approx.: 4.3 t Space requirement approx. (LxWxH): 2.2 x 4.5 x 1.82 m Very well-maintained machine from a training workshop that has been closed. Operating hours: 14,944 h. Spindle hours: 2,233 h. Including current measurement protocol, can be provided upon request Including Y-axis Including C-axis Including approx. 10 tool holders (2 driven EWS axial, radial) Including 3-jaw chuck SMW Including tailstock center Including measuring arm Including chip conveyor Including parts removal arm with conveyor belt Including coolant system Including documentation

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2024, Baru dan belum pernah digunakan, diameter pembubutan 340mm, panjang pembubutan 570mm, sumbu Y +/- 41mm, ayunan 400mm, kapasitas bar 65mm, kecepatan spindle 4.500rpm, turret 15 posisi, motor spindle 11/15kW, milling 6.000rpm, sumbu C 0,001 derajat, kontrol FANUC-i, tailstock, pendingin, pengukur alat, konveyor serutan, parts catcher, chuck 3 jaw, perkakas. Rodpfeziavhjx Aa Iew

Kondisi: baik (bekas), Tahun pembuatan: 2015, jam operasional: 5.381 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: AS0211, tinggi total: 2.400 mm, panjang total: 4.500 mm, lebar total: 2.400 mm, berat keseluruhan: 9.000 kg, produsen pengendali: FANUC, model controller: SERIES 31 i-MODEL A, Perlengkapan: dokumentasi / manual, en-GB: Redpsv Uh Ndofx Aa Isw Technical data: - Operating voltage: 400 V - Frequency: 50–60 Hz - Rated current: 80 A - Control: FANUC SERIES 31 i-MODEL A Travels: - X1 / X2 axis: 180 mm each - Y1 axis: ±45 mm - Z1 axis: 704 mm - Z2 axis: 620 mm - E2 axis: 720 mm - Rapid traverse X/Y/Z axis: 30 m/min Spindle 1: - Max. speed: 5,000 rpm - Spindle nose: A6k - Spindle bore: 65 mm - Drawtube bore: 65 mm - Chuck diameter: 210 mm - Drive power: 24 kW Spindle 2: - Max. speed: 7,000 rpm - Spindle nose: Ø 110 mm - Spindle bore: 42 mm - Drawtube bore: 42 mm - Chuck diameter: 140 mm - Max. chuck jaw weight: 1.25 kg - Output power: 16.5 kW Tool turret: - 1x 10-position tool turret - 1x 12-position tool turret - All stations powered (12 stations each) - Max. speed of driven tools: 8,000 rpm Accessories: - Chip conveyor by KNOLL - Tool holders (as shown in the photos, included in delivery)

Kondisi: bekas, Tahun pembuatan: 2010, Diameter putar di atas tempat tidur: 700 mm Diameter putar di atas luncuran: 380 mm Diameter putar maksimum: 410 mm Kontrol: HEIDENHAIN - 4290 Kecepatan putar spindle maksimum: 5.000 rpm Jarak antara senter: 975 mm Perjalanan sumbu x: 300 mm Perjalanan sumbu y: 120 (+/- 60) mm Perjalanan sumbu z: 850 mm Rsdpfx Aaezhpage Iew Jumlah posisi pada penukar alat: 12 Penjepitan alat: VDI40 Pusat bubut dan milling CNC | DMG - CTX 800 Beta dilengkapi revolver untuk alat bertenaga, chuck Schunk (Ø 315 mm) serta tailstock dan konveyor serbuk. Paket alat lengkap sudah termasuk dalam pengiriman. Mesin berada dalam kondisi terawat baik.

Kondisi: baik (bekas), Tahun pembuatan: 2007, jam operasional: 88.040 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 07400003691, diameter pembubutan: 120 mm, lubang spindel: 118 mm, gerak cepat sumbu X: 30 m/menit, pergeseran cepat sumbu Y: 15 m/menit, pergerakan cepat sumbu Z: 30 m/menit, tinggi total: 2.500 mm, panjang total: 5.500 mm, lebar total: 2.500 mm, berat keseluruhan: 11.000 kg, produsen pengendali: SIEMENS, model controller: SINUMERIK 840 D POWERLINE, DMG GILDEMEISTER TWIN 102 CNC Turning and Milling Center Rodpfx Aaeyaqgyo Iew - Indicated spindle hours: 43,558 - Spindle speed range: 3,200/5,000 rpm - Turning diameter: 270 mm - Distance between spindles: 900 mm - X1 travel: 290 mm - Z1 travel: 650 mm - X2 travel: 180 mm - Z2 travel: 650 mm - Y1 travel: ±40 mm - Z3 travel: 670 mm - X3 travel: 175 mm - Max. bar diameter: 100/104 mm - Number of driven tools per turret: 12 - Including chip conveyor, with 2 tool turrets, each with 12 tool stations, main and counter spindles, as well as foot switches. Please note, the machine has the following defects: - The B-axis is defective (located on turret 1) - The guideways and drives show age-related wear - X2-axis (guide rails) runs slightly askew by approx. 0.03 mm (should be remeasured) - Occasionally, the referencing of the axes via the control system does not function properly - The hydraulic pump was replaced with a substitute unit after a failure, and is now located externally as a separate device FCA D-58256 Ennepetal, loaded onto truck on a date to be agreed upon at the end of February 2026.

Kondisi: sangat baik (bekas), dengan sumbu C Dengan alat berputar Kontrol FANUC 21i-TB Manual Guide Diameter pembubutan - 355 mm Panjang pembubutan - 1330 mm Kecepatan spindel 2.800 rpm Pembagian sumbu C 0,001° Pemegang alat revolver dengan 12 posisi berputar Beragam aksesori Redpfxozhmnbj Aa Iew MARCELS MASCHINEN CH

Kondisi: sangat baik (bekas), Versi spindel ganda dengan sumbu C Dengan sumbu Y Kontrol FANUC 18i TB Manual Guide Rodpfx Aozhmi Soa Isw Diameter pembubutan - 280 mm Panjang pembubutan - 400 mm Kecepatan spindel masing-masing - 6.000 rpm Pembagian sumbu C 0,001 ° Konektor spindel ASA A2-5 Pemegang alat revolver dengan 12 posisi digerakkan Pengumpan batang Perangkat penangkap bagian Konveyor serpihan Aneka aksesori MARCELS MASCHINEN CH

Kondisi: sangat baik (bekas), Mesin Bubut CNC Mazak Quickturn Nexus 300 Kapasitas Diameter maksimum batang - 77mm Diameter pemotongan maksimum - 420mm Putaran maksimum - 680mm Spindel Kecepatan spindel utama: Maks 4.000rpm / Min 35rpm Berat benda kerja pada spindel utama (termasuk chuck) 450kg Lubang spindel - 88mm Garis tengah spindel - 1080mm Hidung spindel - A2-8 Perjalanan Sumbu Sumbu X 225mm Sumbu Z 680mm Laju pemakanan pemotongan (sumbu X maks) 8m/menit (sumbu Z maks) 8m/menit Gerak cepat Sumbu X (maks) 30m/menit Sumbu Z (maks) 25m/menit Turret Ukuran alat/ shank alat bubut - 25 x 25 Waktu indeks turret 1/2 putaran penuh 0,8 detik Langkah tunggal 0,2 detik Jumlah stasiun pada turret drum 12 Tailstock (bukan chucker) Pergerakan body digerakkan motor Langkah body 645mm Tirus dudukan No.5 Pusat standar yang disediakan No.5 Sistem chucking Redpjzh Ndxsfx Aa Isw Silinder chuck S2078-15Y Tipe chuck B210A815X Langkah rahang pada diameter 8,8mm Diameter chuck utama 10" Kontrol CNC Mazatrol PC Fusion CNC 640T Nexus

Kondisi: bekas, Tahun pembuatan: 2011, Detail Teknis: Diameter pembubutan standar: 200 mm Panjang putar maksimum: 810 mm Kontrol: MSX-701 MAPPS IV Diameter putar di atas alas: 800 mm Jarak maksimum antara senter: 1130 mm Diameter pembubutan maksimum: 320 mm Diameter benda kerja maksimum: 300 mm Diameter batang: 65 mm Perjalanan sumbu X1: 210 mm Perjalanan sumbu X2: 210 mm Perjalanan sumbu X3: 210 mm Perjalanan sumbu Y1: 110 mm (+65/-45) Perjalanan sumbu Y2: 110 mm (+45/-65) Perjalanan sumbu Z1: 300 mm Perjalanan sumbu Z3: 300 mm Perjalanan sumbu Z2: 810 mm Perjalanan sumbu B: 870 mm Kisaran kecepatan spindle: 5.000 rpm Jumlah rentang kecepatan spindle: 2 Hidung spindle: JIS A2-6 Lubang spindle: 73 mm Rjdpfjy S Tm Uex Aa Ijw Diameter bantalan spindle: 120 mm Sumbu C: 0,001° Diameter batang maksimum: 65/52 mm Jumlah revolver: 3 Jumlah posisi stasiun alat: 16 x 3 = 48 posisi Tinggi shank untuk alat kotak: 20 mm Diameter shank untuk boring bar: 32 mm Waktu penggantian revolver (4 stasiun): 0,18 detik Jumlah alat berkendali: 16 x 3 = 48 posisi Kecepatan maksimum alat berkendali: 6.000 rpm Kapasitas pemrosesan alat bubut: M16 / Ø16 Kecepatan rapid sumbu X: 30 m/menit Kecepatan rapid sumbu Y: 20 m/menit Kecepatan rapid sumbu Z: 50 m/menit Daya motor spindle: 25/22 kW Daya alat berkendali: 7,5/5,5 kW Kebutuhan daya total: 92,7 kVA Berat mesin sekitar: 9,4 ton Dimensi mesin sekitar: 4,0 x 2,8 x 2,4 m Aksesoris: Konveyor serbuk Perangkat pendingin Sumbu C spindle utama dan tandingan Sumbu Y 2x Penghitung bagian Penghitung total Pengukuran alat Gripper bagian dari atas dengan konveyor Spindle 1: chuck hidrolik SMW KNCS-N 210 / 52 mm Spindle 2: collet chuck Hainbuch Spanntop nova Kombi Axfix 65 Antarmuka robot NZ2000 T3Y2 dilengkapi dengan 2 spindle dan 3 revolver. 2 revolver memiliki fungsi sumbu Y dengan motor milling bawaan. Ini memungkinkan pemrosesan simultan dengan 3 revolver. Pemesinan berkecepatan tinggi dan kinerja tinggi dapat dicapai menggunakan hingga 48 alat berkendali. Mesin ini dirawat oleh departemen pemeliharaan internal dan oleh Mori Seiki.

Kondisi: sangat baik (bekas), Tahun pembuatan: 1999, Fungsionalitas: berfungsi sepenuhnya, panjang pembubutan: 196 mm, diameter putar di atas sled silang: 130 mm, kecepatan spindel (min.): 6.000 rpm, Diameter batang (maks.): 36 mm, berat keseluruhan: 1.900 kg, Perlengkapan: dokumentasi / manual, For sale: Yamazaki Mazak QT-6T CNC Lathe in Excellent Condition We are offering a used Yamazaki Mazak QT-6T CNC lathe, manufactured in Japan, in excellent operational and mechanical condition. The machine is currently in production, is fully functional, and can be demonstrated under power by appointment. Machine Details - Manufacturer: Yamazaki Mazak - Model: Quick Turn QT-6T - Year of Manufacture: 1999 - Serial Number: 39178 - Country of Origin: Japan - Control System: Mazatrol - Configuration: 2-Axis CNC Lathe (X / Z) - Machine Weight: approx. 1,900 kg Main Equipment - 6" Chuck - Collet Chuck - Complete set of collets - Bar machining capacity up to 36 mm - 8-position turret - Tool Eye (Automatic Tool Measurement System) - Automatic Parts Catcher - Coolant system - Fully operational condition Included Equipment - Fedek bar feeder - Feeder length: 1.5 m - Pneumatic bar pushing system - 6" Chuck - Collet Chuck - Complete set of collets - Complete set of tool holders - Manuals and technical documentation - Various accessories and spare parts Technical Specifications - Maximum turning diameter: approx. 130 mm - Maximum turning length: approx. 196 mm - Spindle bore diameter: approx. 45 mm - Maximum spindle speed: up to 7,000 rpm - Bar machining capacity: 32–36 mm - X-axis travel: approx. 80 mm - Z-axis travel: approx. 200 mm - Rapid traverse X/Z: up to 30 m/min Machine Condition ✔ Excellent mechanical condition ✔ Regularly maintained ✔ In production ✔ Ready for immediate use ✔ Function test available ✔ All machine manuals and books included Additional Information The machine is sold as a complete production package and is ideal for bar machining, small and medium production runs, and high-precision work. Rsdpfjzal Raox Aa Iow Loading assistance available. Operating video can be provided upon request.

Kondisi: baru, Tahun pembuatan: 2025, Ref. No.: 10465 Manufacturer: IGREK Model: FR 1000 T Year of manufacture: 2025 Control type: CNC control Control system: Siemens / Heidenhain Location: Istanbul Country of origin: Türkiye X-axis travel: 1,350 mm Y-axis travel: 1,500 mm Z-axis travel: 900 mm B-axis: ° C-axis: 360° Spindle taper: HSK-T100 Rotary table diameter: 1,000 mm Table load capacity: 2,000 kg Tool magazine with: 48 pcs. Spindle speed: 15,000 rpm Rapid traverse X/Y/Z: 48 m/min Spindle motor power: 35 kW Max. spindle torque: 220 Nm Machine length: 3,200 mm Machine width: 6,400 mm Machine height: 4,050 mm Approx. machine weight: 40 t Additional information: IGREK FR 1000 T – Compact precision for demanding applications The IGREK FR 1000 T is a CNC turning and milling center offering 5-axis simultaneous machining, combining advanced technology in a compact design. Manufactured in 2024, this machine is available for immediate use and ideally suited for precise machining of medium-sized workpieces across various industries. Key features: Compact performance: Travel distances of 1,350 mm (X), 1,500 mm (Y), and 900 mm (Z), with a table load capacity of up to 2,000 kg, provide optimal conditions for flexible applications. 5-axis simultaneous machining: Featuring a B-axis (°) and a C-axis (360°), even complex geometries can be machined with high accuracy. High-performance spindle: The spindle achieves speeds up to 15,000 rpm, a maximum torque of 220 Nm, and a drive power of 35 kW—ideal for demanding milling tasks. Enhanced capacity: A tool magazine with 48 stations and HSK-T100 interface ensure quick tool changes and efficient processes. First-class speed: With rapid traverse rates of 48 m/min on all axes, machining times are reduced to a minimum. Rjdpfx Aajxmd S Io Iew Technical highlights at a glance: - Travel distances: X 1,350 mm / Y 1,500 mm / Z 900 mm - Rotary table diameter: 1,000 mm - Max. table load: 2,000 kg - Spindle power: 35 kW - Spindle speed: up to 15,000 rpm - Machine dimensions (LxWxH): 3,200 x 6,400 x 4,050 mm - Weight: approx. 40 tons Additional advantages: Thanks to state-of-the-art controls (Siemens or Heidenhain) and a robust machine design, the IGREK FR 1000 T is suitable for both single-part and series production. The manufacturer provides international service and comprehensive warranty coverage. Discover the IGREK FR 1000 T as your dependable partner for precise and efficient manufacturing—now available from stock. Contact us for further information!

Kondisi: sangat baik (bekas), Tahun pembuatan: 1989, For sale: Mazak QuickTurn 20N CNC lathe. The machine is in very good condition. Equipment includes: MAZATROL T-2, MAZATROL CAM-T-2 control system. Redpju U R E Aofx Aa Isw

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2003, Fungsionalitas: berfungsi sepenuhnya, For sale: Well-maintained EMCO Hyperturn 665 MC Plus with IEMCA Master 880MP-E bar feeder, chip conveyor, and high-pressure coolant pumps! Machine was exclusively used for brass parts! CNC turning and milling center | EMCO HYPERTURN 665 MC Plus with main and sub-spindle, C and Y axes, 2x turrets with 12 driven tool stations each! Technical specifications: Swing diameter over bed: 600 mm Rodpfxexzq Nce Aa Iew Swing diameter over cross-slide: 500 mm Control: Siemens Sinumerik 840 D Max. turning diameter: 430 mm Max. turning length: 744 mm Max. bar capacity: 65 mm X-axis travel: 270 mm Z-axis travel: 750 mm X2-axis travel: 205 mm Z2-axis travel: 750 mm Y-axis travel: 100 mm (+/- 50 mm) Main spindle speed: 0 - 5,000 rpm Sub-spindle speed: 0 - 7,000 rpm Turrets: 2x 12 stations, all driven! Tool holder: VDI 30 Upper turret: X, Z, Y axis Lower turret: X, Z axis Sub-spindle left/right movement: Z3 axis C11 spindle: 65 mm diameter (hollow chuck cylinder) C12 spindle: 45 mm diameter (solid chuck cylinder) with parts ejector Turret type: Sauter 2x 14 bar high-pressure pumps Accessories: Complete tool cabinet with driven and static tool holders, carbide inserts, and toolholders Collet chucks for main and sub-spindle Complete documentation etc. Machine available immediately! Machine ready for operation! We will load the machine! Transport can be organized upon request!

Kondisi: bekas, Tahun pembuatan: 2012, nomor mesin/kendaraan: 104113, terdiri dari: Mesin bubut CNC EMAG VL3 V6.1, th. 2012, No. seri 104113 dan Mesin bubut CNC EMAG VL3 V6.1, th. 2012, No. seri 104114, masing-masing dengan kontrol CNC FANUC SERIES 32i-MODEL A, sistem pengumpan robotik dengan robot pengumpan FANUC M10iA, th. 2012, setiap mesin dilengkapi sistem filter WW ME-FI 600, sistem penghisap serpihan Sermeto HENNIG 30 S, agregat pendingin EMAG, sistem pendingin, sistem konveyor benda kerja, dan panel kontrol manual. Rodpfxsy Sqgxo Aa Isw

Kondisi: bekas, Tahun pembuatan: 2012, nomor mesin/kendaraan: 103899, terdiri dari: CNC Mesin Bubut EMAG VL3 DSL, tahun pembuatan 2012, No. Seri 103899 dan CNC Mesin Bubut EMAG VLY, tahun pembuatan 2012, No. Seri 10390, masing-masing dengan kontrol CNC SIEMENS SINUMERIK, sistem pengisian robot dengan robot pengisi FANUC M10iA, tahun pembuatan 2012, setiap mesin dilengkapi sistem filter WW ME-FI 600, penyedot serbuk logam Sermeto HENNIG 30 S, unit pendingin EMAG, perangkat pendingin cairan, sistem pengangkut benda kerja dan panel kontrol manual. Rodpjy Sqgrjfx Aa Ijw

Kondisi: hampir baru (bekas), Tahun pembuatan: 2024, MAZAK QUICK TURN 200 MSY Diameter maks. pemesinan: 380 mm Panjang maks. pemesinan: 575 mm Kecepatan putar milling maks.: 5.000 rpm Kecepatan putar spindle maks.: 5.000 rpm Diameter batang maks.: 65 mm Mesin dilengkapi dengan: - KONTROL CNC Mazatrol SmoothG - Chuck hidrolik 3-jaw KITAGAWA BB-208 untuk spindle utama, diameter 210 mm - Chuck hidrolik 3-jaw KITAGAWA B-206 untuk spindle kedua, diameter 169 mm - Tool Eye - Sumbu C - Sumbu C untuk spindle lawan, akurasi input 0,0001° - Sumbu Y - Antarmuka untuk majalah feeder batang - Penangkap bagian otomatis - Antarmuka robot - Pompa pendingin berdaya tinggi - Conveyor chip MAYFRAN - 8 pcs dudukan alat tetap - 2 pcs dudukan alat berputar Rodpfx Ajzgw Icsa Iew

Kondisi: baik (bekas), Tahun pembuatan: 2013, Poros utama dan poros lawan Rjdpfx Asy Ivyisa Isw