Beli Stama Pusat Pemesinan Universal bekas (32.120)

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2017, jam operasional: 11.206 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 20170708, jarak pergerakan sumbu X: 670 mm, jarak lintasan sumbu Y: 830 mm, jarak gerak sumbu Z: 600 mm, model controller: Heidenhain 530, kecepatan spindel (maks.): 18.000 rpm, The machine underwent maintenance in April 2025, during which the rotary union was replaced at a cost of €8,600! TECHNICAL DETAILS Travel Range X-axis: 670 mm Travel Range Y-axis: 830 mm Travel Range Z-axis: 600 mm Swivel Range A-/C-axis: approx. -100 to +120° / -120 to +120° C-axis rotation: 360° Table diameter: 800 mm T-slots (number x width): 9 x 90 mm Maximum table load: 1,200 kg Kessler spindle: 18,000 rpm Maximum tool length: 300 mm Maximum tool diameter: 75 mm Maximum tool diameter (adjacent stations empty): 125 mm Maximum tool weight: 7 kg Tool change time: 3 s Rapid traverse X/Y/Z: 60 m/min Max. A-axis speed: 50 rpm Max. C-axis speed: 100 rpm Acceleration X/Y/Z: 7 m/s² Repeatability: 0.004 mm Positioning accuracy: 0.008 mm Rotary drive system: Integrated direct drives Tool holder: HSK 63 Tool stations: 96 MACHINE DETAILS Control unit: Heidenhain 530 Dimensions & Weight Weight: 19,000 kg Overall layout with accessories (L x W x H): 4,150 x 5,000 x 3,500 mm Tank capacity: up to 330 l Gjdpfxoy I Tvns Alkjbl Total coolant capacity: up to 425 l Operating Hours Control unit on-time: 20,248 h Machine on-time: 19,424 h Program run time: 11,331 h Spindle hours: 11,206 h EQUIPMENT Spindle cooler Kessler rotary arm, 800 mm swing diameter, fully usable with zero-point clamping system Note: The probing system is not included in the offer. The fixtures, however, are part of the offer.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2004, jam operasional: 61.082 h, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 2.800 mm, jarak lintasan sumbu Y: 2.200 mm, jarak gerak sumbu Z: 800 mm, model controller: HEIDENHAIN TNC 426, Perlengkapan: konveyor serpihan, Important information: Auction extended by 14 days. The control unit has subsequently been identified as HEIDENHAIN iTNC 530. Previous specification: TNC 426. A new spindle was installed in January 2025! The machine has been regularly maintained! TECHNICAL DETAILS Gbjdpsy Dgyfjfx Alksl Travel X-axis: 2,800 mm Travel Y-axis: 2,200 mm Travel Z-axis: 800 mm Feeds Rapid traverse: 35,000 mm/min Spindle speed S1 (continuous operation) vertical: 10,000 rpm Spindle speed S1 (continuous operation) universal swivel head 2-axis: 18,000 rpm MACHINE DETAILS CNC control: HEIDENHAIN iTNC 530 Electrical data Supply voltage: 400 V (–15 %, +10 %) Frequency: 50 Hz Power consumption: 101.1 A Total installed power: 59.8 kW Operating hours Power-on hours: 98,755 h Program run: 61,082 h EQUIPMENT High-rigidity gantry design Precision linear guides and ball screws Spacious working area with 2.8 m X-axis travel High feed rates for efficient machining Ideal for tool, mold, and mechanical engineering Documentation and acceptance certificate according to ISO standards Tool changer Cooling system Chip conveyor Interchangeable milling head with 4th/5th axis

Kondisi: sangat baik (bekas), Tahun pembuatan: 2014, jam operasional: 11.440 h, DMG 5 axis Simultaneous HSC 30 Linear Tahun 2014 Kontrol Heidenhain TNC640 Perjalanan X320 / Y300 / Z280mm Sumbu B +/- 120 derajat Sumbu C 360 x 0,001 derajat HSK-E40, 40.000rpm Gedpfx Alow Hxiwekebl Meja rotary swivel Touch probe Sistem pengukuran alat BLUM 3D Quick Set Siklus Application Tuning Semburan udara melalui spindle Sistem filter super halus dengan tooling ----- Obral Stok -----

Kondisi: hampir baru (bekas), Tahun pembuatan: 2015, jam operasional: 9.925 h, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 1.000 mm, jarak lintasan sumbu Y: 1.100 mm, jarak gerak sumbu Z: 750 mm, gerak cepat sumbu X: 60 m/menit, pergeseran cepat sumbu Y: 60 m/menit, pergerakan cepat sumbu Z: 55 m/menit, produsen pengendali: Heidenhain, model controller: TNC 640, lebar meja: 900 mm, panjang meja: 1.150 mm, beban meja: 2.000 kg, berat keseluruhan: 22.000 kg, kecepatan spindel (maks.): 18.000 rpm, jam operasional spindle: 9.925 h, pasokan pendingin: 80 batang, panjang alat: 500 mm, diameter alat: 160 mm, Perlengkapan: dokumentasi / manual, kecepatan rotasi dapat diubah tanpa batas, konveyor serpihan, For sale: Top-maintained 5-axis simultaneous universal machining center Hermle C52U with a new spindle (replaced in 03/2025) and only 400 hours since replacement! Year of manufacture: 2015 Control: Heidenhain TNC 640 Travel distances: X: 1000 mm Y: 1100 mm Z: 750 mm A: +100° / -130° C: 360° Table load capacity: 2000 kg Clamping surface: 1150 mm x 900 mm Equipment: - Heidenhain TNC 640 control - AVD Active vibration damping - ACC Active chatter suppression - AFC Adaptive feed control - Heavy-duty machining (HDM) - Spindle speed: 18,000 rpm - Spindle taper: HSK-A63 - 60 tool stations - 9-fold rotary union Gbsdeygx Hnspfx Alkjl - Scraper belt chip conveyor - A3 Blum tool breakage/tool measurement - 3D touch probe Heidenhain - Electronic thermal compensation - ICS 80 bar with paper band filter - External air blast - Internal air blast - Electronic handwheel - Hardware kinematic option - Manual cabin door - Automatic cabin roof - Chip flush nozzle - ... etc. The machine is available immediately! The machine is in excellent condition, free of defects! All maintenance carried out by Hermle! Spindle replacement also carried out by Hermle! Invoice and measurement protocol are available!

Kondisi: baik (bekas), Tahun pembuatan: 2017, jarak pergerakan sumbu X: 500 mm, jarak lintasan sumbu Y: 450 mm, jarak gerak sumbu Z: 400 mm, 5-axis machining center DMG MORI CMX 50 U including robot Year of manufacture: 2017 Control: Siemens Operate Technical data Travel distances: X-axis: 500 mm Y-axis: 450 mm Z-axis: 400 mm B-axis: -5 to +110° Gsdpfxey Ry N Te Alkobl C-axis: 360° Main spindle: Tool holder: SK 40 Spindle speed range: 20 - 12,000 rpm Main spindle drive power (100/40%): 13 / 9 kW Worktable: Table size: D 630 x 500 mm Tool changer: Number of tool stations: 30 Feeds: Rapid traverse (x/y/z): 30 m/min Operating hours: Spindle hours: Technical features & accessories: - Direct measuring system in x, y, and z, incl. air purge - Air blast switching via M-function - Production package consisting of: - Internal coolant supply 12 bar - Chip conveyor, tank 250 L - Enclosure roof - Tool changer door can be opened - Signal lamp - Probe PP40 - Tool measurement TS27R - Tool breakage monitoring Robot ROBOJOB Type: Mill-Assist-E Year of manufacture: 2018 Spindle bearings were replaced in autumn 2025.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2006, Fungsionalitas: berfungsi sepenuhnya, Deckel Maho DMU 50 evo Linear with Heidenhain TNC 530 Control – Excellent Condition Technical Specifications: - Year of manufacture: 2006 - Manufacturer: Heidenhain, Model: iTNC 530 - Travel paths: X 500 / Y 450 / Z 400 mm - C-axis: 360 degrees - B-axis: 0 degrees to 161.955 degrees - Tool holder: HSK A63 - Max. spindle speed: up to 18,000 rpm - Feed rate: steplessly programmable up to 20,000 mm/min (X, Y, Z) - C-/B-axis: feed steplessly programmable up to rapid traverse speed - Rapid traverse (Y, Z axis): 50 m/min X axis: 80 m/min (linear drive) B axis: 40 rpm C axis: 50 rpm - Tool magazine: double gripper, 60 magazine positions - Table clamping surface: Ø 500 x 380 mm T-slot spacing: 63/14H7 Gbodpjy R Dgpjfx Alksl - Table load capacity: 200 kg - Dimensions and weight (approx.): Machine w/o control & attachments Depth: 3.0 m | Width: 2.4 m | Height: 2.6 m Weight: approx. 7,000 kg - Operating voltage: 400 V - Heidenhain HR 410 electronic handwheel - Power connection: 17 kVA - Chip conveyor - Active spindle cooling - Mist extraction unit - Internal coolant supply (IKZ) 40 bar - Coolant filtration system (fleece filter system) - Spray gun - Visiport - Air purge system for the measuring system - Prepared for robotic loading - 3D probe: Heidenhain TS640 - 3D Quick Set - Kinematics - Blum laser for tool measurement and breakage control - Complete documentation Performed Works: - Main spindle completely overhauled - Full maintenance: all coolant and pneumatic hoses replaced, new filters, fluids and belts renewed, wipers, etc. Complete cleaning - Geometrically measured (acceptance protocol available) About the machine: For sale is a Deckel Maho DMU 50 evo Linear machining center with Heidenhain TNC 530 3D path control. The machine is in excellent condition. The main spindle was overhauled (replacement spindle), fully serviced, and an acceptance protocol was completed. Invoices for the overhaul amounting to €42,000 (net) are available. Take advantage of the opportunity to inspect and test the machine under power on site.

Kondisi: bekas, Tahun pembuatan: 2005, jarak pergerakan sumbu X: 730 mm, jarak lintasan sumbu Y: 850 mm, jarak gerak sumbu Z: 560 mm, lebar meja: 500 mm, tinggi meja: 500 mm, kecepatan spindel (min.): 10.000 rpm, Kami dapat menawarkan kepada Anda mesin Mazak Variaxis 730-5x 5-sumbu dengan sistem Palletech. Spesifikasi teknis: Diameter benda kerja maksimal x tinggi benda kerja maksimal: 730 x 500 mm Ukuran palet: 500 x 500 mm Jumlah palet: 12 (Palletech High-rise) Gbjdpjy Ryylsfx Alkel Perpindahan sumbu X: 730 mm Perpindahan sumbu Y: 850 mm Perpindahan sumbu Z: 560 mm Sumbu A (kemiringan meja): +30/-120° Sumbu C (rotasi meja): 360° (indeks 0,001°) Kecepatan spindle: 35–10.000 rpm Motor spindle: 30/22 kW Penukar alat: 120 Tipe alat: BT 50 Untuk pertanyaan apapun mengenai mesin maupun untuk penjadwalan kunjungan, silakan hubungi kami melalui telepon atau email.

Kondisi: baik (bekas), Tahun pembuatan: 2001, Fungsionalitas: belum diuji, jarak pergerakan sumbu X: 350 mm, jarak lintasan sumbu Y: 240 mm, jarak gerak sumbu Z: 340 mm, gerak cepat sumbu X: 20 m/menit, model controller: Siemens Sinumerik 840 D, tinggi total: 2.100 mm, panjang total: 3.800 mm, lebar total: 3.600 mm, beban meja: 100 kg, kecepatan rotasi (maks.): 15.000 rpm, berat keseluruhan: 1.600 kg, For sale is a 5-axis machining center from DMG, model DMU 35 M, equipped with two manual axes. The machine is in good condition. Technical Data: DMU 35 M Year of manufacture: 2001 X-axis: 350 mm Y-axis: 240 mm Z-axis: 340 mm Spindle speed: 15,000 rpm Feed rate: infinitely variable up to 5,000 mm/min Rapid traverse: 20 m/min Clamping surface: Ø 400 x 280 mm Swivel range: 360° (mechanical) Table clamping range: +105° / -150° (mechanical) Max. table load: 100 kg Gbjdpfx Aoy Nz Nrslkol Tool holder: SK 40 Tool clamping: pneumatic/mechanical Space requirement: 3,800 x 3,600 x 2,100 mm Transport dimensions: approx. 2,000 x 1,700 x 2,100 mm Weight: 1,600 kg Transport and loading can be organised Europe-wide for an additional charge, if required. Prices are subject to VAT. Viewings are possible by appointment. Contact us—our team looks forward to assisting you. Trade-in or exchange possible! Machinery purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Do you need a high-quality yet affordable metalworking machine for your production? Or would you like to sell yours? For further information or to get in touch, please visit our website.

Kondisi: bekas, Tahun pembuatan: 2014, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 332-22, jarak pergerakan sumbu X: 630 mm, jarak lintasan sumbu Y: 400 mm, jarak gerak sumbu Z: 360 mm, model controller: SIEMENS 840D, kecepatan rotasi (maks.): 17.500 rpm, hidung spindel: HSK63, en Gedpfx Aey R Eywelkebl

Kondisi: bekas, Tahun pembuatan: 2003, jam operasional: 64.930 h, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 630 mm, jarak lintasan sumbu Y: 560 mm, jarak gerak sumbu Z: 560 mm, produsen pengendali: Heidenhain, model controller: iTNC 530, beban meja: 400 kg, kecepatan rotasi (maks.): 12.000 rpm, Kebutuhan ruang: sekitar 3,5 x 2,5 x 2,5 m (P x L x T, tanpa konveyor serbuk) Berat mesin: sekitar 6.300 kg Gedpjy Ncnpefx Alkjbl

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2014, Immediately available travelling column machine FS 2100 • Total travel path X=21,000 mm, ideal for flexible machining of large components • Travel distances X=21,000 mm, Y=1,500 mm; Z=3,500 mm • iTNC 530 control with wireless handheld unit HR 550 FS, operator cabin on the travelling column • 2-axis NC universal drilling/milling head, fully simultaneous and positioning operation per column • Spindle HSK-A 100, 10,000 rpm, 220 Nm spindle torque • ICS air up to 6 bar • Dust protection packages for the protection of guideways and drives • BA 4 per travelling column • Wireless probe RMP 60, manufacturer: Renishaw • Work area monitoring with network camera and monitor at the rear of the system • Process monitoring ToolScope base system • Additional control panel at the rear of the machine • Partial enclosure consisting of working area and sheet metal door, rear with safety fence for a clear view into the working area • Includes fixators Gbedpfxoy Nbvxj Alkel • Cooling units • Includes internal tool cooling (closed cooling circuit) with cooling unit • Short delivery time, available immediately ---Subject to prior sale--- Inspection by appointment possible Spindle hours: approx. 9,079 SPECIAL PRICE!

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2014, Immediately available! Gantry-type Milling Machine FS 1200 • Total travel in X-axis: 12,000 mm – ideal for flexible large-part machining • Travels: X = 12,000 mm; Y = 1,500 mm; Z = 3,500 mm • Heidenhain iTNC 530 control with wireless HR 550 FS handwheel, operator's cabin mounted on the gantry • 2-axis NC universal drilling and milling head, fully simultaneous and positioning operation for each gantry • Spindle: HSK-A 100, 10,000 rpm, 220 Nm spindle torque • Air through spindle up to 6 bar • Dust protection packages for the protection of guideways and drives • 4 support bases per gantry • Wireless measuring probe RMP 60 (Renishaw) • Work area monitoring with network camera and monitor at the rear of the machine • Process monitoring: ToolScope basic system • Additional operator panel at the rear of the machine Gedpfx Ajy Nbvrjlkjbl • Partial enclosure consisting of machining area and sheet metal door, rear with safety fence offering free view into the working area • Includes machine fixators • Cooling units • Includes internal tool cooling (closed-loop cooling circuit) with cooling unit • Short delivery time, available immediately – subject to prior sale Inspection by appointment possible Spindle hours: approx. 9,079 SPECIAL PRICE!

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2014, FS 480 Gantry-Type Machine – Immediately Available • Total travel range X=4800 mm, ideal for flexible machining of large components • Travel paths: X=4,800 mm, Y=1,500 mm, Z=3,500 mm • iTNC 530 CNC control with wireless HR 550 FS handwheel, operator’s cabin mounted on the gantry • 2-axis NC universal drilling/milling head, full simultaneous and positioning operation for each gantry • Spindle HSK-A 100, 10,000 rpm, 220 Nm spindle torque • ICS air up to 6 bar • Dust protection packages for safeguarding guides and drives • BA 4 per gantry • Wireless probe RMP 60 by Renishaw • Work area monitoring with network camera and monitor on the rear side of the system • Process monitoring with ToolScope basic system • Additional operator panel at the rear of the machine • Partial enclosure consisting of work area and sheet metal door, rear side equipped with a safety fence providing unobstructed view into the work area • Includes fixators • Cooling units Gsdey Nbu Ispfx Alkobl • Includes internal tool cooling (closed cooling circuit) with chiller unit • Short delivery time, available immediately, ---subject to prior sale--- Inspection possible by appointment Spindle hours: approx. 9,079 SPECIAL PRICE!!

Kondisi: baik (bekas), Tahun pembuatan: 2015, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 19859, jarak pergerakan sumbu X: 630 mm, jarak lintasan sumbu Y: 560 mm, jarak gerak sumbu Z: 510 mm, daya nominal (semu): 44 kVA, produsen pengendali: MATSUURA, model controller: G-TECH 31i, tinggi total: 3.200 mm, panjang total: 7.000 mm, lebar total: 6.000 mm, diameter meja putar: 500 mm, berat keseluruhan: 15.000 kg, kecepatan spindel (maks.): 12.000 rpm, jumlah slot dalam magazin alat: 60, diameter pemasangan: 40 mm, tegangan masuk: 415 V, frekuensi input: 50 Hz, arus masuk: 62 A, Perlengkapan: dokumentasi / manual, konveyor serpihan, MATSUURA NX-520 Pusat Pemesinan Universal - Dudukan alat: SK 40 - Perjalanan sumbu A: -125° hingga +10° - Perjalanan sumbu C: 360° Gbodpfx Aoy I Sq Relkol - Meja putar NC 5-sumbu: diameter 500 mm - Termasuk dudukan alat yang terlihat di foto! - Termasuk sistem pendingin, sistem penyedot debu, serta konveyor serbuk Perhatian: Catatan, ragum mesin yang terlihat di meja putar tidak termasuk dalam lingkup pengiriman! Perhatian: Mesin dapat diangkut menggunakan truk dengan lebar hingga 2500 mm! Perhatian: Item harus diambil secara mengikat antara 24.08 dan 27.08.2026 pada tanggal yang akan disepakati nanti. FCA D-61352 Bad Homburg – dimuat ke truk

Kondisi: baik (bekas), Tahun pembuatan: 2007, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 17405, jarak pergerakan sumbu X: 550 mm, jarak lintasan sumbu Y: 410 mm, jarak gerak sumbu Z: 450 mm, gerak cepat sumbu X: 50 m/menit, pergeseran cepat sumbu Y: 50 m/menit, pergerakan cepat sumbu Z: 50 m/menit, kecepatan pemakanan sumbu X: 50 m/menit, laju pemakanan gandar Y: 50 m/menit, laju pemakanan sumbu Z: 50 m/menit, daya nominal (semu): 36 kVA, produsen pengendali: MATSUURA, model controller: G-TECH 840 DI, tinggi total: 3.500 mm, panjang total: 6.000 mm, lebar total: 5.000 mm, berat keseluruhan: 15.000 kg, kecepatan spindel (min.): 50 rpm, kecepatan spindel (maks.): 15.000 rpm, jumlah slot dalam magazin alat: 240, diameter pemasangan: 40 mm, panjang alat: 300 mm, diameter alat: 80 mm, berat alat: 10.000 g, tegangan masuk: 415 V, frekuensi input: 50 Hz, arus masuk: 50 A, Perlengkapan: konveyor serpihan, MATSUURA MAN 72-25 V CNC Universal Machining Centre - Tool holder: SK 40 - B-axis travel: -110°/+110° - C-axis travel: 360° - Distance between pallet surface and spindle centerline: -20 to 430 mm - Distance between B-axis center and spindle centerline: 4 - 410 mm - Distance between B-axis center and spindle centerline: -10 mm - Distance between pallet centerline and bed zero point: 265 mm Gjdpfx Ajy I Sfhslkebl - Distance between pallet centerline and Y zero point: 180 mm - Spindle bearing inner diameter: 70 mm - Tool clamping force: 7.0 kN - B-axis feed rate: 30/min - C-axis feed rate: 50/min - Max. tool diameter: 80 mm, with free adjacent stations: 150 mm The machine is equipped with a chip conveyor and a coolant system. Note: Includes all tool holders mounted on the tool changer! Attention: The machine can be transported on a truck up to 2700 mm width! Attention: The item must be collected bindingly between 24.08. and 27.08.2026 on a mutually agreed date. FCA D-61352 Bad Homburg – loaded onto truck

Kondisi: sangat baik (bekas), Tahun pembuatan: 2019, Fungsionalitas: berfungsi sepenuhnya, We offer you the following: Gbedpfx Aloy Rx Stokel Manufacturer: DMG MORI Model: DMU 50 3rd Generation Year of manufacture: 2019 Control unit: Heidenhain TNC 640 Technical specifications: Travel ranges: X-axis: 650 mm Y-axis: 520 mm Z-axis: 475 mm B-axis: -35 to +110° C-axis: 360° Main spindle: Speed range: 0 – 20,000 rpm Main spindle drive power (100/40%): 35 / 25 kW Torque: 130 / 86 Nm Working table: Swiveling rotary table, simultaneous operation possible: Ø 650 x 500 mm Tool changer: Tool holder: CAT 40 (conversion to SK 40 possible) Number of tool pockets: 60 positions Operating hours: approx. 13,500 h Spindle hours: approx. 5,300 h Technical features & accessories: - Active spindle cooling - Direct path measuring system in X, Y, Z, B, C - Scraper belt chip conveyor - Internal coolant supply (IKZ) 40/80 bar, comprising: - Paper band filter - 980 l tank - Cabin roof - Rotary union in the spindle - Air blast through the center of the spindle - Dual switch filter - Rotating viewing window - Rinsing gun for chip flushing - Oil and emulsion mist separator - Infrared probe, Renishaw PP 60 optical (OMP 60) – Tool breakage detection IRS2 - Prepared for use with 3D quickSET - MPC (Machine Protection Control) - Operating mode 4 - Coolant temperature control for IKZ system Accessories, pictured tools, and clamping devices are included in the scope of delivery only if stated in the additional information. Specifications and details are subject to change and errors. Sale subject to prior sale.

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 2017, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 1.000 mm, jarak lintasan sumbu Y: 800 mm, jarak gerak sumbu Z: 700 mm, gerak cepat sumbu X: 40 m/menit, pergeseran cepat sumbu Y: 40 m/menit, pergerakan cepat sumbu Z: 40 m/menit, produsen pengendali: Heidenhain, model controller: TNC640, Perlengkapan: dokumentasi / manual, kecepatan rotasi dapat diubah tanpa batas, konveyor serpihan, MULTIMILL 1000 by EDEL Werkzeugmaschinen GmbH Machine quality at a new level, at a price that eases your calculations. The MULTIMILL 1000 is a 5-axis all-rounder with turning functionality, capable of milling and turning operations in a single setup. Proven EDEL technology, combined with our complete factory refit procedure: every assembly overhauled, all wear parts replaced, fully measured, and delivered with a factory warranty. Technical Specifications: 1 5-Axis Milling Machine EDEL MM1000 • X/Y/Z: 1,000/800/700 mm 1 NC Universal Milling Head M21 • B-axis, (-)10° - (+)187°, 900/1,680/4,000 Nm, 330°/s, (55 rpm) 1 Milling Spindle CS-21-180-A • 21/32 kW, 100/130 Nm, 18,000 rpm, HSK-A63 1 NC Rotary Table CRT/1000/H/HT • 960/2,048/4,000 Nm, 570°/s, (95 rpm), 20,000 N (centrically) • Faceplate diameter: 900 mm 1 Heidenhain TNC 640 • 5-axis contouring control • Electronic handwheel HR 510 • DXF converter • CAD viewer • KinematicsOPT • Enhanced energy efficiency 1 Remote maintenance 1 Extraction system for oil and emulsion mist • Filter systems, capacity approx. 2,000 m³/h • Cascaded filtration 1 Coolant/lubrication system • 950-litre tank • Flood coolant: 30 l/min / 20 bar • High-pressure internal coolant: 20 l/min / 50 bar • Rinsing gun: 40 l/min / 2 bar 1 Workpiece measuring system • Probe: BLUM TC 60 • BRC radio technology 1 Tool changer HSK-A63 / 52 positions • Tool diameter 75/130 mm • Tool length 300 mm • Tool weight 8 kg 1 Chip conveyor • Hinge belt / scraper belt conveyor 1 Externally switchable air cooling (flood / external) • Flood: 20 bar / External: 6 bar 1 Turning technology • Machine control Heidenhain TNC 640 • Rotary table CRT/1000/H/HS • Tool interface HSK-A63 • Spindle clamping device • Tool measurement system for turning tools 1 Internally switchable air cooling (high pressure / internal) • High pressure: 50 bar / Internal: 6 bar Gbodpfx Aljpiqzkekol YOUR PRICE ADVANTAGE: The regular list price, including equipment, is €699,000. EDEL CertifiedRefit price starting from €389,000 plus VAT Includes factory warranty, on-site training at the buyer’s location, and connection to our remote maintenance system. INSPECTION AND DEMONSTRATION ANY TIME Schedule an appointment at our factory – we will demonstrate the machine for you under live cutting conditions.

Kondisi: sangat baik (bekas), en-GB Gbodpfx Alsy Rb Dfjksl

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2001, Fungsionalitas: berfungsi sepenuhnya, Universal – Mesin Frais & Bor DECKEL MAHO DMU 50 M Gbodpfx Aey Id Stslkjl Dengan kontrol Heidenhain TNC 310 Tahun pembuatan: 2001 Perjalanan sumbu: X 500 Y 400 Z 400 Rentang putaran: 20 – 4.500 rpm tanpa langkah Dengan perlengkapan berikut: Meja putar miring manual dengan tampilan digital untuk sumbu C + B Permukaan penjepit 700 mm x 500 mm Handwheel elektronik untuk sumbu X, Y, Z Kabinet pelindung cipratan Lampu mesin 4 pcs kaki mesin yang dapat disetel tinggi Perangkat pendingin media Manual pengoperasian

Kondisi: sangat baik (bekas), Tahun pembuatan: 2008, jam operasional: 29.000 h, Fungsionalitas: berfungsi sepenuhnya, Mandelli Storm 2500 Horizontal Machining Center / Flexible Manufacturing Cell Manufacturer: Mandelli Sistemi S.p.A. Model: Storm 2500 Type: U 42 / 8000 Factory No.: XXXX Year of manufacture: 2008 Origin: Italy Control: Siemens Sinumerik 840D Plant control: CswWin / Beckhoff Industrial PC Condition/Maintenance: Very good / single-shift operation / Hardly any hours of operation Technical Data: X-axis travel: 2,600 mm Y-axis travel: 1,500 mm Z-axis travel: 1,800 mm B-axis: 360,000 positions / continuous APC / pallet axis: 360,000 positions Rapid traverse linear axes: 35 m/min B-axis speed: 8 rpm Accuracy as per VDI 3441: Positioning accuracy P: 10 µm Repeatability Ps: 5 µm Spindle / Head: U-head horizontal / vertical Gbodpfjy H D R Tox Alkjl Spindle mount: ISO SK 50 Speed range: 37 – 6,000 rpm Spindle power: 44 kW Max. torque: 706 Nm Tool magazine: 208 tool stations Rack-type tool magazine with automatic tool handling Max. tool length: 600 mm Max. tool diameter: 450 mm Max. tool weight: 35 kg Pallet system: Front transpallet / automatic pallet changer system 6 pallets, each 1,000 x 1,250 mm 4 fixed stations Rotary unit for loading and unloading workpieces Electrical data as per nameplate: System: S2500 / 840D Rated voltage: AC 400 V, 3 Ph / PE Frequency: 50 Hz Full load current: 178 A AC auxiliary voltage: 230 V DC auxiliary voltage: 24 V Standard: IEC 60204-1 / EN 60204-1 Chip conveyor: Manufacturer: Meta Year of manufacture: 2007 Weight: approx. 1,100 kg Additionally, a screw conveyor is visible in the machine area. Equipment / Peripherals: Filter system Hydraulic unit Chip conveyor Screw conveyor COSEMA peripheral unit Control cabinet system Coolant and lubricant peripherals Separate plant operating panel Comprehensive pallet system Clamping devices / Fixtures: Several heavy-duty angle plates, fixture plates, grid clamping plate, custom clamping fixtures and pallet assemblies available. Tools / Accessories: Numerous SK50 toolholders, boring bars, boring tools, milling toolholders, drill and reamer holders, extensions, adapters as well as other spare and standard tools are visible. Several hundred additional toolholders can be purchased upon request. Optional / On request: Apfel tool cabinets with extensive tool inventory Additional clamping devices and fixtures ELBO CONTROLLI tool presetting unit Workbenches / tool racks / shelving systems upon agreement The machine is in good, production-ready condition. This is a heavy-duty horizontal machining cell designed for flexible complete machining of large and complex workpieces. The working area shows normal signs of use typical for a productive heavy-duty cutting machine. The plant must be removed from the factory by June 2026. Earlier availability may be possible by arrangement. Inspection under power can be arranged by appointment. All information given to the best of our knowledge. Subject to errors, prior sale, and technical modifications.

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2010, • Travel range: X = 3,100 mm, Y = 1,950 mm, Z = 1,390 mm • Heidenhain iTNC 530 with HR 410 handwheel • Machine table for multi-sided machining, 3,000 mm x 1,600 mm • 2-axis NC universal drilling and milling head, suitable for simultaneous and positioning operation • Spindle: 10,000 rpm, HSK 100 interface, 130 Nm spindle torque • Tool changer system: HSK 100 / 40 pockets for tools up to 750 mm in length • Chip augers in X-axis for optimal chip evacuation • Chip conveyor (scraper type) for cross transport, manufacturer: Knoll • Coolant supply, 900 L, manufacturer: Knoll • External air • ICS (internal coolant supply) 60 bar for deep hole machining • Full enclosure with safety glass panels, open at the top for optimized crane loading • Split sliding doors at the front • Split sliding doors at the operator side • Wireless probe RMP 60 • Including wash gun • Including platforms at loading and operator sides • Completely factory overhauled and newly painted • Short delivery time upon agreement, subject to prior sale • Used machine • Y-axis ball screw replaced including bearings in September 2021 • X-axis linear guide and carriages replaced in July 2023 • Milling spindle overhauled in May 2023 (new clamping set, new clamping cartridge, new rotary union, general inspection) (23,105 spindle hours) • Under power for inspection in 72793 Pfullingen • Optional: leveling shoes • Optional: commissioning/installation • Optional: transport • Total spindle hours: 23,122 • Total machine hours: 53,991 • Year of manufacture: 2010 Subject to prior sale Gbsdpfey Hmhuox Alkjl

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2025, jarak pergerakan sumbu X: 3.000 mm, jarak lintasan sumbu Y: 1.500 mm, jarak gerak sumbu Z: 1.400 mm, gerak cepat sumbu X: 30 m/menit, pergeseran cepat sumbu Y: 30 m/menit, pergerakan cepat sumbu Z: 30 m/menit, berat benda kerja (maks.): 6.000 kg, kecepatan rotasi (maks.): 10.000 rpm, panjang alat: 800 mm, Mesin baru HDC3000 dengan 6 sumbu • Gerakan sumbu X=3000 mm, Y=1500 mm, Z=1400 mm • Heidenhain iTNC 640 dengan handwheel • Meja putar NC untuk pemesinan 5 sisi 1250 mm x 1600 mm • Kepala bor/milling universal NC 2-sumbu, operasi simultan penuh dan posisi • Spindel 10.000 rpm HSK100, S1=220 Nm torsi spindel • Sistem pergantian alat HSK100 / 60 slot – alat hingga panjang 800 mm • Konveyor serpihan • Dioptimalkan untuk pemesinan 5 sisi termasuk pengeboran lubang dalam • Sistem pendingin • Sistem peniup udara dalam/luar • Pendinginan bertekanan tinggi (IKZ) 60 bar untuk pengeboran lubang dalam • Enklosur penuh • Area kerja besar, diameter 2300 mm • Termasuk kaki perata (leveling feet) • Termasuk pistol pencuci • Termasuk garansi • Waktu pengiriman singkat, penjualan antara waktu berlaku Gbedoy Hmhnopfx Alksl

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2003, Segera tersedia dari lokasi: Pusat pemesinan 5 sumbu (3 plus 2) Deckel Maho Tipe DMU 35 M Tahun pembuatan 2003 Kontrol Siemens 810 D Handwheel elektronik Meja universal – meja putar/miring 400 x 290 mm Perjalanan sumbu X/Y/Z 350/240/340 mm Konektor SK 40 Kecepatan spindle 20 – 6300 rpm Kapasitas daya 6,3/10 kW Godpfoy N Ad Rsx Alkobl Daya beban meja 100 kg Kisaran putar 360 derajat Kisaran ayun +105/-15 derajat Jarak spindle ke meja 145/485 mm Feed rate hingga 3000 mm/menit Berat 1750 kg Harga: EUR 4.500,— ditambah PPN dari lokasi

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2001, Segera tersedia di lokasi: Gedpfx Aoy N Ad Dslkobl Pusat pemesinan 5 sumbu Deckel Maho Tipe: DMU 50 M Tahun pembuatan: 2001 Kontrol: Heidenhain TNC 124 5 sumbu (3 plus 2) Sumbu putar manual dengan meja putar B dan C Sumbu B dan C ditampilkan di kontrol Meja: 700 x 500 mm Perjalanan sumbu X/Y/Z: 500/400/400 mm Kapasitas meja: 200 kg Spindel SK 40 Kecepatan spindel: 20 – 4500 rpm Daya penggerak: 9 / 13 kW Rentang putar C: 360 derajat Rentang ayun: plus 95 / minus 10 derajat Kecepatan feed hingga 5.000 mm/menit Berat: 3 ton Perangkat pendingin cair Harga EUR 8.500,– belum termasuk PPN, tersedia di lokasi

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2001, jam operasional: 18.391 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 11160000853, jarak pergerakan sumbu X: 600 mm, jarak lintasan sumbu Y: 700 mm, jarak gerak sumbu Z: 600 mm, produsen pengendali: Heidenhain, kecepatan spindel (maks.): 12.000 rpm, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel X-axis: 600 mm Travel Y-axis: 700 mm Travel Z-axis: 600 mm Spindle speed max.: 12,000 rpm Feed rate X-axis: 20 – 15,000 mm/min Feed rate Y-axis: 20 – 15,000 mm/min Feed rate Z-axis: 20 – 15,000 mm/min Rapid traverse X-axis: 40 m/min Rapid traverse Y-axis: 40 m/min Rapid traverse Z-axis: 40 m/min Position measuring system resolution X-axis: 0.001 mm Position measuring system resolution Y-axis: 0.001 mm Position measuring system resolution Z-axis: 0.001 mm Increment unit X-axis: 0.001 mm Increment unit Y-axis: 0.001 mm Increment unit Z-axis: 0.001 mm Position tolerance X-axis: 0.01 mm Position tolerance Y-axis: 0.01 mm Position tolerance Z-axis: 0.01 mm Tool holder: SK 40 NC rotary table clamping surface diameter: 630 mm Max. table rotation speed: 10.7 rpm Table feed: 3,600/min Measuring system resolution, table: 0.001 MACHINE DETAILS Control manufacturer: Heidenhain Indicated spindle hours: 18,391 h Operating voltage: 400 V Frequency: 50 Hz Rated current: 80 A Connected load: 44 kVA Dimensions & Weight Dimensions (L x W x H): 5,500 x 4,500 x 2,500 mm Machine weight: 10,000 kg EQUIPMENT 60-position tool changer Chip conveyor Cooling unit Gedpfx Aoy Ni Aaelksbl