Beli Stocker 1,2/2X05 bekas (735)

Kondisi: bekas, Tahun pembuatan: 2011, 1 unit Crane STOCKER 1.2/2x05 Kapasitas angkat: 2x 250 kg, panjang sekitar 6 m, crane sudah dibongkar dan diletakkan di atas palet Warna: sesuai gambar dan berdasarkan inspeksi visual Tahun pembuatan: 2011 Kondisi: bekas Lokasi stok barang: luar ruangan Metode pembayaran: pembayaran di muka melalui transfer bank Hsdpfx Alsy D Nc Aj Isl Pengiriman: hanya penjemputan sendiri di lokasi Ditzingen-Heimerdingen

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, kapasitas angkut: 15.000 kg, Derek jembatan dua girder berkualitas tinggi merek STOCKER dengan kapasitas angkut 15.000 kg (15 t). Versi tugas berat dengan dua girder kotak besar, trolley elektrik (trolley atap) dengan katrol tali kawat dan kerekan ganda (kait beban kuning terlihat). Cocok untuk teknik mesin, konstruksi baja, pengecoran, perakitan berat, dan penyimpanan beban berat. Kapasitas angkut: 15.000 kg / 15 t Produsen: STOCKER Tipe: Derek jembatan dua girder (trolley atap) Penggerak: sepenuhnya elektrik (angkat, pergerakan trolley, pergerakan derek) Catu daya: rel gesek / kabel tarik Hedpoy H R Irjfx Al Iol Kondisi: bekas, sudah diservis, siap pakai Rentang, tinggi konstruksi, tinggi pengangkatan, dan panjang lintasan atas permintaan. Pembongkaran harus dilakukan oleh perusahaan spesialis – penawaran dapat kami atur jika diinginkan.

Tahun pembuatan: 2005, Kondisi: bekas, Fungsionalitas: fungsi terbatas, Fischer / Stocker electric recirculating oven with blower, Year of manufacture: 2005 Upgraded in 2022/23 including: Hedsyx H Swspfx Al Iel Additional insulation including cladding Siemens control system with program selection and memory Temperature-resistant fan shaft including lowering of the fan unit in the chamber Installation of 3 x 1.5 kW heating elements Connected load: 45 kW Increased heating capacity from originally +250°C to +450°C Fully extendable sliding floor External dimensions (L x W x H): 3,100 mm x 2,750 mm x 2,900 mm (including attachments) Usable chamber dimensions (internal): L x W x H = 2,500 x 1,700 x 1,500 mm The oven was originally used in GFRP production of aerospace parts. Purchased used by us in 2020 and adapted/optimized according to the above details for the purpose of baking/enamel curing and tempered coatings. Due to changing project requirements, however, the oven quickly became too small for our needs and was never put into operation by us! Ideal for electrostatics and/or wet painting, tempering, or special applications! Electrically fully functional, ready for immediate use in this regard. Due to the longer idle time, some repairs to the sealant joints (cladding) and door seals will certainly be necessary! Price is net ex works, negotiable!

Kondisi: hampir baru (bekas), Tahun pembuatan: 2024, Fungsionalitas: berfungsi sepenuhnya, kapasitas angkut: 1.200 kg, Perlengkapan: kendali jauh kaki, Meja beban 1200 kg Meja Putar Pengelasan, Sertifikat CE dengan tambahan biaya, dengan klem pengikat baru bekas ringan Kapasitas beban horizontal 1200 kg Kapasitas beban miring 1200 kg sangat kokoh Hedpexbhnpsfx Al Ijl Kecepatan dapat diatur tanpa tingkat mulai dari 0,05 hingga 0,6 rpm (hingga 1,5 rpm atas permintaan) Diameter meja putar 1200 mm Tinggi horizontal 950 mm, miring hingga tengah 720 mm dengan remote kontrol tangan, tampilan digital Panjang 1,35 m x Lebar 1,2 m

Tahun pembuatan: 2015, Kondisi: sangat baik (bekas), nomor mesin/kendaraan: KHT, Steel / Stocker Industrial Hall Crane, Gantry Crane, Bridge Crane incl. Steel Structure + Floor Control Dimensions of steel structure approx. length 15m x 9.5m width, fitted with 1x bridge crane, 12,500 kg, lifting height 6m Payload/Lifting capacity: 12.5 tonnes Technical data of the system: Crane runway/steel construction consisting of HEA/HEB180 beams, running rails HEB240 Length outer edge steel structure: approx. 15m Overall width outer edge (steel structure): approx. 9.53m Total crane height: approx. 4.52m Top edge running rails: approx. 3.99m Bottom edge running rails: approx. 3.87m Top edge bridge: approx. 4.52m Bottom edge bridge: approx. 4.13m Hook height: approx. 3.4m Crane span: approx. 6.23m Support spacing: left (2.65+4.44+4+3.5m), right (4.6+4.9+4.9m) System is delivered complete: Steel structure complete with power rail 1x bridge incl. travel drives 1x 12,500kg wire rope hoist SH 5032-25 4/1 1Am M4 lifting speed 1/6.3m/min Hodjwgwrqepfx Al Iol Crane is disassembled and immediately available Location of the item is 75053 Gondelsheim Very good condition, see pictures Shipment via freight forwarding or collection by appointment only.

Kondisi: baru, Tahun pembuatan: 2026, 090202 Hedpfx Alswirx De Isl

Kondisi: hampir baru (bekas), Tahun pembuatan: 2025, Cantilever rack with roof beams: Hot-dip galvanized bolted system Scope of delivery: - 9 upright frames, height 4,230 mm with base section, usable depth 1,200 mm - 27 cantilever arms with 1,200 mm usable depth, with deflector - 9 roof beams with 1,500 mm projection, pre-drilled for on-site roofing (*Excludes wooden purlins and trapezoidal sheets for roofing) - Including longitudinal and diagonal bracing for 1,500 mm upright spacing - Incl. fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts and extensions can be ordered at any time) - (*Offer available in larger quantities: approx. 50 uprights in stock) Detailed description: - Robust steel construction using IPE profiles - All parts hot-dip galvanized - Load capacity per upright: 2,700 kg plus roof, wind and snow load (Maximum snow load 1.85 kN/m² and wind load zone 2) - Load capacity per cantilever arm: 900 kg - Including roof beams (maximum snow load 1.85 kN/m² and wind load zone 2) - Cantilever arms height-adjustable in 100 mm increments - Each upright fitted with 3 bolted cantilever arms, depth 1,200 mm, with deflector = 4 storage levels stacked - Including longitudinal and diagonal bracing at 1,500 mm axis spacing - Rack length: 12,100 mm - Including fastening materials (without floor anchors) - With assembly instructions and C4 load capacity plates according to DIN standard - Expert telephone consultation - Made in Germany Hedpeh R Taqofx Al Isl - Short delivery times - On-site collection possible Our cantilever racks are exclusively produced in Germany. We offer reliable transport with advance delivery notification. Material is packaged efficiently for easy unloading. The substrate must be concrete, level, suitable for dowelling, and able to absorb the applied loads. The customer is responsible for checking and ensuring ground conditions, load-bearing capacity, and any required official approvals. The uprights must be anchored to the floor on site; wall anchoring is neither required nor recommended. According to professional association guidelines, it is recommended that the uprights offer at least 500 mm projection above the top storage level.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2025, Cantilever rack, used: Bolted system, hot-dip galvanized version Hedpfx Aofdkb Tjl Isl Scope of delivery: - 4 rack uprights, height 4,160 mm with base section, 1,200 mm usable depth - 12 cantilever arms, 1,200 mm usable depth, standard - Longitudinal and diagonal braces for 4,000 mm rack length (upright spacing 1,300 mm) - Fastening hardware (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged components!) - (*Spare parts reorder and extension possible at any time) - (*Offer available for larger quantities: approx. 90 uprights in stock) Detailed description: - Robust steel construction made of IPE profiles (bolted system) - Hot-dip galvanized surface - Rack height 4,160 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Rack length = 4,000 mm - Including fastening hardware (without floor anchors) - Supplied with assembly instructions and C4 load signs in accordance with DIN standard - Professional telephone consultation - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively manufactured in Germany. We provide reliable shipping with advance notice prior to delivery. Goods are packed efficiently to allow for easy unloading. When installed outdoors, the load capacity is reduced to account for wind and snow loads. The floor must be concrete, level, and suitable for dowelling, and must be able to bear the imposed loads. The surface condition, load-bearing capacity, and any required official permits must be checked and ensured by the customer. The rack uprights must be anchored to the floor on site. Anchoring to the wall is not necessary or recommended. According to professional association guidelines, rack uprights should provide at least a 500 mm projection at the top storage level above the upright top.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2025, Used Cantilever Racking: Bolted System, Hot-dip Galvanised Version Scope of delivery: - 4 rack uprights, height 4,160 mm, with base section, usable depth 1,200 mm - 12 cantilever arms with 1,200 mm usable depth, standard - Longitudinal and diagonal bracing for 4,000 mm rack length (upright spacing 1,300 mm) - Fastening materials (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged components!) - (*Spare parts reordering and extensions possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Robust steel construction from IPE sections (bolted system) - Surface hot-dip galvanised - Rack height 4,160 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Rack length = 4,000 mm - Including fastening materials (without floor anchors) - With assembly instructions and load capacity plates C4 according to DIN standard Hsdpfod Tqalox Al Iol - Specialist telephone advice - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable shipping with advance notification before delivery. The material is packed efficiently for easy unloading. When installed outdoors, load capacities are reduced due to wind and snow loads. The foundation must be concrete, level, suitable for doweling, and capable of bearing all applied loads. The customer is responsible for checking and ensuring the substrate condition, bearing capacity, and obtaining any necessary official approvals. Uprights are to be anchored to the ground by the customer; wall anchoring is neither necessary nor recommended. According to trade association recommendations, uprights should have at least 500 mm clearance above the top storage level.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2025, Used cantilever racking: Bolted system, hot-dip galvanized design Scope of delivery: 4 racking uprights, height 3,500 mm with foot section 1,200 mm Hedsfdkb Uepfx Al Iol 12 cantilever arms with 1,200 mm usable depth, standard Including longitudinal and diagonal bracing for 1,300 mm upright distance Including fastening material (floor anchors not included) - (Delivery time approx. 1 week) - (No damaged parts!) - (Spare parts and expansion always available on request) - (Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height 3,500 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Includes longitudinal and diagonal bracing for 1,300 mm upright spacing - Rack length = 4,000 mm - Includes fixing material (without floor anchors) - With assembly instructions and load capacity signs C4 according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery time - Pickup on site possible Our cantilever racks are exclusively produced in Germany. We offer reliable freight forwarding with prior notification before delivery. Materials are packaged for easy unloading. When installing outdoors, load capacities are reduced by wind and snow load. The foundation must be concrete, level, and suitable for dowelling as well as capable of bearing the applied loads. The substrate condition, load-bearing capacity, and any necessary official permits must be checked and ensured by the customer. The rack uprights must be anchored to the floor on site; wall anchoring is not necessary and is not recommended. According to professional association guidelines, it is recommended that the rack uprights have at least 500 mm projection above the uppermost storage level.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2024, Cantilever racking used: Bolt system, hot-dip galvanized design Scope of delivery: - 4 rack uprights, height 3,000 mm, with foot section 1,200 mm - 12 cantilever arms with 1,200 mm usable depth, standard type - Including longitudinal and diagonal bracing for 1,300 mm center distance - Including mounting hardware (excluding floor anchors) * (Delivery time approx. 1 week) * (All parts undamaged!) * (Spare parts and extensions available at any time) * (Bulk offer available: approx. 50 uprights in stock) Detailed description: - Robust steel construction made of IPE profiles (bolt assembly) - Surface hot-dip galvanized - Rack height 3,000 mm - Load capacity per upright 2,250 kg - Foot section and arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (equals 4 storage levels) - Load capacity per cantilever arm 750 kg - Includes longitudinal and diagonal bracing for 1,300 mm bay distance - Rack length = 4,000 mm - Including mounting hardware (excluding floor anchors) - Includes assembly instructions and C4 load rating labels according to DIN standard - Expert technical advice by phone - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight forwarding services with advance delivery notification. Hjdpfoguk Dkex Al Isl The material is securely packed to enable easy unloading. When installing outdoors, load capacities are reduced due to wind and snow loads. The foundation must be made of concrete, level, suitable for dowel anchoring, and able to support the expected loads. The client is responsible for verifying and ensuring substrate conditions, load-bearing capacity, and any necessary official permits. The rack uprights must be secured to the floor on site; wall anchoring is neither necessary nor recommended. According to professional association guidelines, the rack uprights should extend at least 500 mm above the top storage level.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2025, Cantilever racking with roof beams: Hot-dip galvanized bolted system Scope of delivery: - 9 rack uprights, height 4,230 mm, with base, usable depth 1,200 mm - 27 cantilever arms, usable depth 1,200 mm, with end stops - 9 roof beams with 1,500 mm projection, pre-drilled for on-site roof structure (*Without timber purlins and trapezoidal sheets for roof construction) Hedpfx Alemhhy No Ijl - Including longitudinal and diagonal bracing for 1,500 mm upright spacing - Including fastening material (excluding floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts available to order and system can be expanded at any time) - (*Offer available in larger quantities: approx. 50 uprights in stock) Detailed description: - Sturdy steel construction made from IPE profiles - All components hot-dip galvanized - Load capacity per upright 2,700 kg plus roof, wind, and snow loads (Maximum snow load 1.85 kN/m² and wind load zone 2) - Load capacity per cantilever arm 900 kg - Including roof beams (maximum snow load 1.85 kN/m², wind load zone 2) - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, depth 1,200 mm, with end stops = 4 storage levels - Including longitudinal and diagonal bracing with 1,500 mm upright pitch - Rack length: 12,100 mm - Including fastening material (excluding floor anchors) - With assembly instructions and C4 load signs as per DIN standard - Expert telephone consultation - Made in Germany - Short delivery time - On-site pick-up possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable shipping with prior delivery notification. The material is packed for easy unloading. The base must be concrete, level, suitable for anchor fixing, and able to withstand applied loads. The customer is responsible for verifying and ensuring the ground conditions, load-bearing capacity, and any necessary permits from authorities. The rack uprights must be anchored to the floor on site; wall anchoring is neither required nor recommended. According to professional association guidelines, rack uprights should have at least 500 mm of upright projection above the top storage level.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2025, Cantilever racking, used: bolted system, hot-dip galvanized version Scope of delivery: - 4 racking uprights, height 3,000 mm with base section 1,200 mm - 12 cantilever arms with 1,200 mm usable depth, standard - Including bracing sets (longitudinal and diagonal) for 1,300 mm upright spacing - Including fastening material (without floor anchors) - (Delivery time approx. 1 week) - (No damaged parts!) - (Spare parts reordering and extension possible at any time) - (Offer also available in larger quantities: approx. 50 uprights in stock) Detailed description: - Robust steel construction made of IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height 3,000 mm - Load capacity per upright: 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per arm: 750 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - Including assembly instructions and load plates C4 according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery times - On-site pickup possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable freight services with notification prior to delivery. The material is packed in a practical way to enable easy unloading. Please note: When installed outdoors, load capacities must be reduced due to wind and snow loads. The subfloor must be concrete, level, and suitable for dowelling, and must be able to accommodate the acting loads. The customer is responsible for verifying ground condition, load-bearing capacity, and any required official permits. The racking uprights must be anchored to the floor on site; wall anchoring is not necessary and not recommended. According to German trade association recommendations, rack uprights should extend at least 500 mm above the uppermost storage level. Hedpfxefdkbhe Al Isl

Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, daya: 7 kW (9,52 hp), tipe perpindahan gigi: otomatis, jenis bahan bakar: diesel, konsumsi bahan bakar per jam: 4 l/j, kapasitas tangki bahan bakar: 10 l, warna: kuning, berat operasi: 1.200 kg, daya angkat: 300 kg/m, kondisi ban: 100 persen, kondisi penggerak: 100 persen, kondisi rantai: 100 persen, jumlah tempat duduk: 1, pendaftaran pertama: 06/2025, kelas emisi: Euro 5, tipe tiang: simpleks, volume sekop: 0,025 m³, lebar bucket penggalian: 40 mm, rem: lain, suspensi: lain, Tahun pembuatan: 2025, jumlah silinder: 1, Perlengkapan: 4-dalam-1 sekop, boom yang dapat disesuaikan, garpu palet, gerobak kemiringan, hidrolik, hidrolika gripper, palu hidrolik, sasis yang dapat disesuaikan, sekop standar, track karet, EKS12 mini-excavator – alat bantu yang ringkas dan andal untuk pekerjaan taman, perataan tanah, penggalian kecil, persiapan fondasi, dan pemeliharaan properti. Data teknis Hjdpexf Apijfx Al Iel Berat: 1200 kg Kapasitas bucket: 0,025 m³ Dimensi: 2880 × 950 × 2000 mm Kedalaman gali: 1787 mm Tangki bahan bakar: 10 l Aliran hidrolik: 16 l/menit Mesin: KOOP 192F, 7,6 kW (diesel) Selang hidrolik berbahan logam Pendingin oli hidrolik Pilihan dan aksesori Mesin bensin 9,9 kW "Briggs & Stratton" yang lebih bertenaga (+225 €) Ekstra: lengan berputar (+450 €), sasis yang dapat diperlebar (+675 €) 14 aksesori berbeda: bor, bucket perataan, bucket sempit, dll. Harga dan ketentuan €3430 + PPN Garansi: 12 bulan atau 1.500 jam kerja mesin

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 1986, nomor mesin/kendaraan: LS137/1, Stahl / Stocker crane atas, crane lintas, crane bridge, crane hall Kapasitas angkat 2t - 2000KG Jarak lintasan 4930mm, dimensi luar sekitar 5100mm Tahun pembuatan 1986, kontrol lantai Tinggi angkat 4m Tinggi konstruksi dari atas crane ke kait sekitar 740mm (balok 240mm + hoist 500mm) Panjang end carriage dengan buffer sekitar 2200mm Termasuk 2x sekitar 45m rel lintasan (HEA240) + 1x 50m rel listrik Hodpoywfnnofx Al Iel Kondisi crane sudah dibongkar dan siap pakai Kondisi bekas, buku pengujian dengan perhitungan masa pakai tersisa tersedia Tersedia juga jib crane kolom dan jib crane dinding Sistem Demag KBK dan Abus HB, serta Errikla, Hadef, Stahl KT 2000 dll. Pengiriman melalui ekspedisi dimungkinkan, silakan tanyakan berdasarkan kode pos Pengambilan langsung lebih diutamakan

Kondisi: baru, Tahun pembuatan: 2026, Prod-Masz RED ZGR-2200/1.2 folding press brake available on-site for demonstration and immediate collection. On-site professional instruction provided. Technical Specifications: - Working length: 2060 mm - Bending capacity: up to 1.2 mm - Maximum bending angle: 160 degrees Hodpfoyuplksx Al Iol - Bending beam thickness: 15 mm - Upper beam stroke: 80 mm - Weight: approx. 420 kg - Upper beam can be raised in three positions Equipment: - Degree scale - Angle stop - Rear frame - Front depth stops - CE certificate - 12-month warranty Accessories: Roll slitter (up to 0.8 mm) 350 EUR Shipping within Germany: 180 EUR All prices are subject to an additional 19% VAT Self-collection possible

Kondisi: baru, Tahun pembuatan: 2026, - Capacity: 1.2 mm Hodpfxjgg Nrks Al Isl - Expansion: 250 mm - With 8 sets of rollers

Kondisi: baru, Tahun pembuatan: 2025, daya: 2,2 kW (2,99 hp), fi Hjdpfstctm Hjx Al Ijl

Kondisi: baru, Tahun pembuatan: 2025, lebar kerja: 31.400 mm, Sudut pembengkokan (maks.): 155 °, berat keseluruhan: 700 kg, panjang total: 36.000 mm, lebar total: 900 mm, tinggi total: 1.100 mm, masa garansi: 12 bulan, ketebalan pipi penekuk: 30 mm, bentang bebas: 80 mm, tinggi kerja: 900 mm, Perlengkapan: dokumentasi / manual, Free delivery within 150 km. ABKANTBANK-Technik Halver – YOUR competent partner for press brakes. We are your point of contact for high-quality sheet metal working solutions. As a long-standing sales partner of the Polish manufacturer PROD-MASZ, we respond to our customers' requirements on site and act as an extension of the production line. Machinery demonstrations, expert advice, and professional instruction available upon request. We provide tailored consultations to suit your needs and look forward to your inquiry. Press Brake ZGR3000/1.2 by Prod-Masz – available onsite for testing and immediate collection. Technical Specifications: - Working width: 3140 mm - Sheet thickness: up to 1.2 mm - Non-ferrous metals: 30% higher sheet thickness possible - Bending angle: up to 155° - Bending beam: 28 mm - Daylight: 80 mm - Gas pressure springs - Degree scale - Back gauge for preset bending angles - Sheet metal tray - Approx. weight: 700 kg Other sizes (1000, 1440, 2140, 2640, 3140, 3640, 4140 mm) available on request. Accessory – Roller shear (up to 0.8 mm) 350 EUR All prices are subject to an additional 19% VAT. Hsdpfxjuayame Al Iol CE Certificate Warranty: 12 months. Self-collection Shipping within Germany: 360 EUR

Kondisi: baru, Tahun pembuatan: 2025, Prod-Masz folding bench available on-site for testing and immediate takeaway. On-site professional instruction is provided. Folding Bench ZGR2500/1.2 - Working width: 2640 mm - Sheet thickness up to 1.2 mm - Bending beam: 25 mm - Bending angle up to 145° - Gas pressure springs - Degree scale - Stop for preset bending angles Hjdert Hu Dopfx Al Ijl - Front depth stop - Sheet metal storage tray - Weight approx. 400 kg Other dimensions (1000, 1400, 2140, 2640, 3140, 3640, 4140 mm) available on request Optional accessory: rotary shear (up to 0.8 mm) €350 All prices are subject to an additional 16% VAT. CE Certificate Self-collection Shipping within Germany: €240

Kondisi: baru, Tahun pembuatan: 2025, Abkantbank ZGR2000/1.2 by Prod-Masz – available for on-site testing and immediate pickup. Professional instruction will be provided on-site. - Working width: 2140 mm - Sheet thickness: up to 1.2 mm - Bending angle: up to 145° - Clearance: 80 mm - Gas pressure springs - Degree scale - Stop for pre-set bending angles - Front depth stop - Sheet metal storage tray - Weight: approx. 250 kg Accessories: - Rolling shear (up to 0.8 mm): €350 Hsdpfxspa Um Is Al Isl Shipping within Germany: €180 All prices are subject to an additional 19% VAT. CE certificate included. Warranty: 12 months Self-collection only. Other dimensions (1000, 1440, 2140, 2640, 3140, 3640, 4140 mm) available on request.

Kondisi: baru, Tahun pembuatan: 2025, AUTHORIZED DEALER: PROD-MASZ company. Free delivery up to 150km. YOUR competent partner for FOLDING MACHINES Folding Machine ZGR1400/1.2 from Prod-Masz – on site for testing and immediate pickup. On-site professional instruction included. Technical Data: - Working width: 1400mm - Sheet thickness: up to 1.2mm - Non-ferrous metals: 30% greater sheet thickness - Bending angle: up to 145° - Bending beam: 15mm - Clearance: 80mm - Degree scale - Stop for preset bending angles - Shelf for sheets - Front depth stop - Weight: approx. 125kg Other sizes available upon request (1000, 1440, 2140, 2640, 3140, 3640, 4140mm) Accessories – Roller shear (up to 1.2mm): 350 EUR Shipping within Germany: 180 EUR Hjdpfx Aleqy I Epo Isl All prices are subject to an additional 19% VAT. Self-collection possible CE Certificate Warranty: 12 months. Self-collection.

Kondisi: baru, Tahun pembuatan: 2025, Up to 150 km free delivery. ABKANTBANK-Technik Halver, YOUR competent partner for all matters concerning folding machines. We are your point of contact for high-quality sheet metal processing. As a long-standing distributor for the Polish manufacturer PROD-MASZ, we locally address our customers' needs and see ourselves as an extension of the production line. Relevant machines can be demonstrated onsite if required, along with expert advice and professional instruction. We provide tailored advice – according to your requirements – and look forward to your enquiry. Guillotine Shear 3000/1.0 mm - Working length: 3000 mm - Stable and robust construction for steel sheets up to 1.2 mm - Large cast work table - Open design suitable for continuous cuts - Rear stop with scale - Declaration of Conformity - CE marking Dimensions: Length: 3500 mm Width: 750 mm Height: 1150 mm Weight: approx. 700 kg Passage: 8 cm Hjdpfstctl Njx Al Iol Shipping within Germany: €390 All prices plus 19% VAT. Self-collection Cash on delivery Other sizes from 1000 mm to 3000 mm available on request Contact:

Kondisi: baru, Tahun pembuatan: 2025, RED Plus 2200/1.2 folding machine from Prod-Masz is available on-site for testing and immediate purchase. On-site professional instruction is provided. Technical data: - Working length: 2,060 mm - Bending capacity: up to 1.2 mm - Bending angle: max. 160 degrees - Clamping beam thickness: 15 mm - Upper beam stroke: 80 mm - Weight: approx. 420 kg - Upper beam can be lifted in three positions Features: - Degree scale - Angle stop - Rear frame Hsdpfx Aljpl Su Us Iel - Front depth stops - CE certificate - 12-month warranty Accessories: - Roller cutter (up to 0.8 mm) €350 Shipping within Germany: €180 All prices are subject to an additional 19% VAT. Self-collection possible.

Kondisi: baru, Tahun pembuatan: 2026, PROD-MASZ Folding Machine – Your Best Choice! Reliable equipment and on-time deliveries. FOLDING MACHINE 2.14 m / 1.2 mm Shipping: 180 euros If you know us, you know we keep our word :) Bending angle: 145 degrees Working length: 2.14 m Width: 0.90 m Height: 1.20 m Daylight opening of the clamping beam: 80 mm Bending beam width: 24 mm Steel sheet: 1.2 mm For non-ferrous metals, approx. 30% higher bending capacity. The adjustment system enables precise bending forms for various sheet thicknesses. The rear support is stable and easy to disassemble. Weight: 290 kg Roller shear 0.8 mm, plus 350 euros Hand seam closer, plus 75 euros Delivery time: weekly Hodpfx Aljb Na Eqe Ijl Cash on delivery We look forward to your inquiry! Invoices are issued with 0% VAT as intra-community delivery or plus 19% VAT (German invoice).