Beli Tira Sel Simulasi Iklim Walk-In bekas (36.679)

Kondisi: sangat baik (bekas), en-GB Lredpfeziztuox Al Nsp

Kondisi: sangat baik (bekas), CTS CW-60/5.5 – Climatic Test Chamber, Water-Cooled The CW-60/5.5 from CTS GmbH (Climatic Test Systems) is a medium-sized, walk-in or drive-in climate chamber for performing temperature and humidity tests on multiple test specimens simultaneously. Device Description The climatic test chamber allows you to test the function or material properties of a specimen under the influence of temperature and humidity. Efficient air circulation with a high recirculation volume ensures effective transmission to the specimen. The air handling unit is located at the rear of the interior. The system’s operating units are installed in a separate frame behind the device for easy accessibility. The control unit is housed in a separate electrical cabinet, with the control panel integrated into the cabinet door. For dehumidification, the test chamber is equipped with a self-regenerating compressed air dryer. The chamber can be purged with fresh air via a blower. Technical Specifications: Temperature Tests: - Temperature range: -60 °C to +100 °C - Temperature deviation: ±0.5 to 1 K over time - Temperature change rate (linear, with specimen and heat load, measured at supply air): * Heating: 2 K/min from -40 °C to +85 °C * Cooling: 2 K/min from +85 °C to -40 °C Climatic Testing: - Temperature range: +10 °C to +90 °C - Humidity range: 10 % to 95 % relative humidity - Dew point range: +5 °C to +89 °C - Temperature deviation: ±0.5 K over time - Humidity deviation: ±1 – ±3 % r.h. over time Technical data refer to an ambient temperature of +25 °C, rated voltage 400 V, without test specimen, without heat load, and without additional equipment. Dimensions: Internal dimensions (test chamber / usable space): - Volume: approx. 5,500 litres (5.5 m³) - Internal approx.: Height: 2,300 mm, Width: 1,600 mm, Depth: 1,550 mm External approx.: Height: 2,800 mm, Width: 2,250 mm, Depth: 5,000 mm Operating Data: - Power supply: 400 V +6/-10%, 3/N, PE, 50 Hz - Nominal power: 58.3 kW (incl. 5 sockets) - Nominal current: 86.0 A - Protection class: IP 54 Technical Design: Cooling unit: - Water-cooled, low-noise, semi-hermetic - Stepless capacity adjustment via electronic monitoring and control system - Environmentally friendly refrigerants R23 / R404A Notes: Inspection by appointment possible (46325 Borken) Shipping by freight forwarding possible – costs & arrangements on request Scope of delivery: (see picture) (Specifications and technical data subject to change and error!) We are happy to answer any further questions by phone. Ljdpfozizmuex Al Njrp

Kondisi: sangat baik (bekas), CTS CW-60/5.5 – Climate Test Chamber, Water-Cooled The CW-60/5.5 from CTS GmbH (Climatic Test Systems) is a medium-sized, walk-in or drive-in climatic chamber designed for conducting simultaneous temperature and humidity tests on multiple test specimens. Lodpjzizmnofx Al Njrp Device Description: This climatic test cell enables the assessment of functionality and material properties of test items under controlled temperature and humidity conditions. Efficient air circulation with a high recirculation volume ensures optimal transfer to the test goods. The air handling section is located at the rear of the interior chamber. The system aggregates are positioned behind the chamber in a separate frame for easy access. The control system is housed in a dedicated control cabinet, with the control panel integrated into the cabinet door. For dehumidification, the chamber is equipped with a self-regenerating compressed air dryer. The test area can also be purged with fresh air using a fan. Technical Specifications: Temperature Tests: - Temperature range: -60 °C to +100 °C - Temperature deviation: ±0.5 to 1 K over time - Temperature change rate (linear, with test load and radiant heat, measured in supply air) - Heating: 2 K/min from -40 °C to +85 °C - Cooling: 2 K/min from +85 °C to -40 °C Climatic Tests: - Temperature range: +10 °C to +90 °C - Humidity range: 10% to 95% relative humidity - Dew point range: +5 °C to +89 °C - Temperature deviation: ±0.5 K over time - Humidity deviation: ±1 to ±3% r.h. over time Technical data refer to ambient temperature of +25 °C, rated voltage 400 V, without test samples, radiant heat, or additional equipment. Dimensions: - Internal (test chamber/usable space): - Volume: approx. 5,500 liters (5.5 m³) - Interior (approx.): Height: 2,300 mm, Width: 1,600 mm, Depth: 1,550 mm - External: - Height: 2,800 mm, Width: 2,250 mm, Depth: 5,000 mm Operating Data: - Electrical connection: 400 V +6/-10%, 3/N, PE, 50 Hz - Rated power: 58.3 kW (including 5 sockets) - Rated current: 86.0 A - Protection class: IP 54 Technical Features: - Refrigeration unit: water-cooled, low-noise, semi-hermetic, infinitely variable performance control via electronic monitoring and control system, environmentally friendly refrigerants R 23 / R 404 A Notes: - Inspection by appointment possible (46325 Borken) - Shipping by freight forwarder available—costs & arrangements upon request - Scope of delivery: see image - (Specifications and information subject to change or error!) For further questions, we will be happy to assist you by phone.

Kondisi: sangat baik (bekas), CTS CW-60/5.5 – Climate Test Chamber, Water-Cooled The CW-60/5.5 from CTS GmbH (Climatic Test Systems) is a medium-sized, walk-in or drive-in climatic chamber designed for conducting simultaneous temperature and humidity tests on multiple test specimens. Device Description: This climatic test cell enables the assessment of functionality and material properties of test items under controlled temperature and humidity conditions. Efficient air circulation with a high recirculation volume ensures optimal transfer to the test goods. The air handling section is located at the rear of the interior chamber. The system aggregates are positioned behind the chamber in a separate frame for easy access. The control system is housed in a dedicated control cabinet, with the control panel integrated into the cabinet door. For dehumidification, the chamber is equipped with a self-regenerating compressed air dryer. The test area can also be purged with fresh air using a fan. Technical Specifications: Temperature Tests: - Temperature range: -60 °C to +100 °C - Temperature deviation: ±0.5 to 1 K over time - Temperature change rate (linear, with test load and radiant heat, measured in supply air) - Heating: 2 K/min from -40 °C to +85 °C - Cooling: 2 K/min from +85 °C to -40 °C Climatic Tests: - Temperature range: +10 °C to +90 °C - Humidity range: 10% to 95% relative humidity - Dew point range: +5 °C to +89 °C - Temperature deviation: ±0.5 K over time - Humidity deviation: ±1 to ±3% r.h. over time Technical data refer to ambient temperature of +25 °C, rated voltage 400 V, without test samples, radiant heat, or additional equipment. Dimensions: - Internal (test chamber/usable space): - Volume: approx. 5,500 liters (5.5 m³) - Interior (approx.): Height: 2,300 mm, Width: 1,600 mm, Depth: 1,550 mm - External: - Height: 2,800 mm, Width: 2,250 mm, Depth: 5,000 mm Operating Data: - Electrical connection: 400 V +6/-10%, 3/N, PE, 50 Hz - Rated power: 58.3 kW (including 5 sockets) - Rated current: 86.0 A Lodpjzizmbsfx Al Njrp - Protection class: IP 54 Technical Features: - Refrigeration unit: water-cooled, low-noise, semi-hermetic, infinitely variable performance control via electronic monitoring and control system, environmentally friendly refrigerants R 23 / R 404 A Notes: - Inspection by appointment possible (46325 Borken) - Shipping by freight forwarder available—costs & arrangements upon request - Scope of delivery: see image - (Specifications and information subject to change or error!) For further questions, we will be happy to assist you by phone.

Kondisi: sangat baik (bekas), en_TIRA Type: TCZ 4022 S -2K Description: Climate Simulation Chamber, Air-Cooled System Configuration: The system consists of the following main components: - Walk-in, insulated chamber - Air handling room - Humidification unit - Machine room - Control cabinet Technical Data: Performance Range for Temperature Testing: - Temperature range: -40...+140°C - Temperature consistency, supply air (temporal): ≤ ±0.5°C (without thermal test chamber load, according to DIN 50011 T13 / EN 60068) - Temperature consistency, supply air (spatial): ≤ ±1.0°C (without thermal test chamber load, according to DIN 50011 / EN 60068) - Heating rate (to DIN 50011): approx. 2.0 K/min (without thermal test chamber load, to DIN 50011 / EN 60068, or test specimen in the range -30°C...+85°C) - Cooling rate (to DIN 50011): approx. 2.0 K/min (without thermal test chamber load, to DIN 50011 / EN 60068, or test specimen in the range -30°C...+85°C) Performance Range for Climate Testing: - Temperature range: +10...+90°C - Humidity working range: 10...approx. 95% r.h. (without thermal test chamber load) - Dew point temperature range: +5...+89°C (without thermal test chamber load) - Humidity consistency (in supply air, temporal): ≤ ±2.5% r.h. (measured in supply air) Performance Range for Climate Testing with Heat Compensation: - Temperature range: +15...+80°C - Humidity: 15...approx. 80% r.h. (without thermal test chamber load, with max. 16 kW heat compensation) - Dew point temperature range: +10...+74°C (without thermal test chamber load) Dimensions: - Test chamber (W x D x H): approx. 2260 x 4648 x 2260 mm - External dimensions (W x D x H): approx. 2660 x 6460 x 2800 mm - Clear door opening of test chamber door (W x H): 2260 x 2260 mm - Climate module KB 127 (W x D x H): 1700 x 800 x 1400 mm - Control cabinet (W x D x H): 800 x 500 x 2000 mm Design: Airflow: - Supply air: perforated plate on rear wall, ceiling area - Exhaust air: perforated plate on rear wall, floor area Temperature Control: - Direct cooling by evaporating refrigerant in a finned heat exchanger - Heating with electric resistance heaters Dehumidification: - Direct dehumidification by evaporating refrigerant in a heat exchanger Interior cladding: stainless steel External cladding: galvanized, plastic-coated steel sheet Floor design: stainless steel, floor load 15,000 N/m², wheel load (contact area ≥4 cm²) 1,500 N/wheel Door: double-leaf door, stainless steel, painted exterior with observation window (W x H) 1000 x 1000 mm Test chamber lighting: 4 spotlights at 500 W each Insulation: double-layer, 80 mm PUR foam, 120 mm mineral wool Refrigeration unit (1 piece): Bitzer 6G-30.2Y Refrigerant: R449A Refrigeration oil: SEZ 32 Steam humidifier (1 piece): EDB 40 Colors: - Chamber RAL 9010, white - Door RAL 9010, white - Machine unit RAL 7032, pebble grey Lrodpfx Aozizk Hjl Njp - Control cabinet RAL 7032, pebble grey Weights: - Total system approx. 4,900 kg - Machine module KB 127 approx. 750 kg - Control cabinet approx. 120 kg - Humidification unit approx. 64 kg Connections: - Rated voltage: 400 V +6%/-10% 3/PE N 50 Hz - Rated power: 95 kW - Rated current: 150 A

Kondisi: sangat baik (bekas), Atlas Type: SC 350 MHG Atlas-Solar Climate Test Chamber, Air-Cooled For sale is an ATLAS SC-340 MHG SolarClimatic test chamber (climatic chamber with sunlight simulation by MHG lamp). The unit is suitable for performing standardized weathering and aging tests under combined exposure to radiation, temperature, and climate. Features & Special Equipment: - Precise temperature and humidity control - Integrated humidification system with water tank - Cooling via water or air system (optional) - Access ports for measurement cables available Lrjdpfxeziizmo Al Nop - Control via control panel or interfaces (RS232 etc.) - Robust test chamber floor, loadable up to 60 kg (optionally reinforced to 150 kg) General Data: - Model: SC 340 MHG - Test chamber volume: approx. 335 liters - Cabinet weight: approx. 500 kg - Radiation unit weight: approx. 65 kg Technical Data: - Test volume: 340 l (internal dimensions 580 × 765 × 750 mm) - External dimensions (W × D × H): 865 × 1,595 × 2,180 mm - Radiation source: 1 × 1,200 W MHG lamp - Irradiance: 800–1,200 W/m² - Irradiated area: approx. 3,300 cm² - Weathering: Spectrum 300–3,000 nm, compliant testing according to DIN 75220, IEC 60068-2-5, MIL-STD-810F - Temperature range with radiation: –20 °C to +100 °C (±1 K) - Temperature range without radiation: –30 °C to +100 °C (±0.1–0.5 K) - Heating/Cooling rates: 3.0 K/min (heating), 2.5 K/min (cooling, without radiation) - Noise level: approx. 58 dB(A) at 1 m distance - Power supply: 400 V, 3/N/PE, 50 Hz - Power consumption: max. 6.2 kW, 16 A Refrigerant: R-404A Weight: approx. 565 kg For your safety as a buyer, please note the following information! The following points are carried out in advance on our offered chambers: 1. Functional check and replacement of necessary components 2. If necessary, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see picture) (Subject to changes and errors in the technical specifications and information!) Feel free to contact us by phone if you have any further questions.

Kondisi: bekas, Tahun pembuatan: 2007, Fungsionalitas: belum diuji, nomor mesin/kendaraan: AYA320NY3006, berat keseluruhan: 950 kg, panjang total: 1.700 mm, lebar total: 1.650 mm, tinggi total: 2.120 mm, tegangan masuk: 400 V, arus masuk: 28 A, frekuensi input: 50 Hz, Mazzali Intensys Lab Burn-in industrial (climate) oven, including manual Lrjdpjwm Htqjfx Al Njp Type: Intensys Lab 12+12HD Code: AYA320NY3006 Year of manufacture: 2007 Mains connection: 400V Temperature range: -40°C / +180°C (external cooling) Load capacity: 12 trays Oven dimensions: 72 x 50 x 72 cm Dimensions: 170 x 165 x 212 cm Weight: approx. 950 kg

Kondisi: bekas, Dieses Angebot betrifft eine Walker Safety Cabinets All-In-One Begasungseinheit. Das Gerät ist voll funktionsfähig und kann sofort eingesetzt werden. Die Walker Safety Cabinets All-In-One Begasungseinheit ist eine innovative und kompakte Lösung zur Begasung von Sicherheitswerkbänken sämtlicher Marken und Modelle. Entwickelt für maximale Effizienz und Anwenderfreundlichkeit, vereint dieses Gerät einen integrierten Verdampfer (Boiler) und ein Kohlefiltersystem in einem benutzerfreundlichen Gerät. Hauptmerkmale: Lsdpfoxxx R Nox Al Njrp - Kompaktes Design: Höhe unter 200 mm, sodass die Einheit problemlos durch typische Sicherheitswerkbank-Öffnungen passt, ohne die Tür weiter öffnen zu müssen. - Integriertes System: Vereint Boiler und Kohlefilter für eine umfassende Begasung in einem einzigen Gerät. - Kapazität: Maximale Füllmenge von 30 ml Formaldehyd und 30 ml Wasser – effizient und sparsam im Verbrauch. - Kohlefiltration: Austauschbare Aktivkohle-Granulate: Müssen nach jedem Einsatz für optimale Leistung ersetzt werden. - Frische Vorräte: Die Kohlegranulate sind kostengünstig, leicht verfügbar und haben eine typische Lagerfähigkeit von ca. 18 Monaten. - Walker Safety Cabinets gewährleistet eine schnelle Lieferung von Ersatzgranulat, sodass der Betrieb ohne Unterbrechung fortgeführt werden kann. - Vorteile: Vielseitige Kompatibilität: Geeignet für alle Marken und Modelle von Sicherheitswerkbänken. - Effizienter Betrieb: Das kompakte, integrierte Design minimiert den Platzbedarf und maximiert die Leistung. - Kostengünstige Wartung: Preiswerte und einfach austauschbare Kohlegranulate halten die Betriebskosten niedrig. Anwendungsbereiche: Die All-In-One Begasungseinheit ist ideal für Labore und andere Einrichtungen, die eine effektive und unkomplizierte Begasung von Sicherheitswerkbänken benötigen und so einen sicheren und sterilen Arbeitsbereich gewährleisten möchten.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2019, Speck plant technology Speck Pump Station, SPH-R-055-2 DR control unit incl. 2 centrifugal pumps IN-VB 25-30F 11-E 3A5-055 and 2 RTG actuators + Frame and 2 stainless steel 2-inch manifolds (supply / return) + 3000L tank (2-chamber) Lsdpfx Aljwi Icxe Nsrp + complete 2-inch stainless steel piping + all sensors and actuators / valves / sensors + optionally approx. 250m of 2-inch hose incl. quick couplings and shut-off valves Pumps were dismantled in working condition Dismantled and packed on several pallets Original price of the system: EUR 85,000 Item location: 75053 Gondelsheim Used condition, see pictures Shipping by freight forwarding or collection by appointment

Kondisi: bekas, jarak tempuh: 999 km, daya: 4 kW (5,44 hp), pendaftaran pertama: 01/1995, jenis bahan bakar: bensin, warna: oranye, berat kosong: 180 kg, Tahun pembuatan: 1995,

Kondisi: bekas, Tennant 5680 Nachläufer-Scheuersaugmaschine – Technische Hauptdaten Eine Tennant 5680 batteriebetriebene Nachläufer-Scheuersaugmaschine, ideal für gewerbliche und industrielle Reinigungsanwendungen. Dieses Modell ist für seine Robustheit, Zuverlässigkeit und herausragende Reinigungsleistung bekannt – perfekt für Lagerhallen, Produktionsflächen, Supermärkte, Gesundheitseinrichtungen und Gebäudereinigungsunternehmen. - Modell: Tennant 5680 (batteriebetriebene Nachläufer-Scheuersaugmaschine) - Lösungstank: 114 Liter (30 Gallonen) - Schmutzwassertank: 151 Liter (40 Gallonen) - Bürstenmotoren: 2 x 0,55 kW (0,75 PS) - Bürstengeschwindigkeiten: - Scheibe: 200 U/min - Walze: 750 U/min - Saugturbinemotor: 0,6 kW (0,8 PS), 3-stufig - Batteriesystem: 36 V (Standard ≈ 240 Ah) - Maschinengewicht (mit Batterien): ca. 365 kg (ca. 805 lbs) - Geräuschpegel: ca. 75 dB(A) Ljdpfxex Szwbs Al Nsrp - Flächenleistung: bis zu ca. 2.845 m²/h (etwa 30.600 ft²/h) – abhängig von Arbeitsbreite & Technik Zustand - Maschine befindet sich in einwandfreiem, betriebsbereitem Zustand - Vollständig geprüft und sofort einsatzbereit - Batterien und Bürstenköpfe funktionsfähig (geben Sie ggf. an, ob erneuert/geprüft) Kontaktieren Sie uns für Preisangaben, weitere Fotos, ein Video oder zur Terminvereinbarung einer Besichtigung. Weltweite Lieferung möglich. Stichworte: Tennant 5680 Scheuersaugmaschine, Nachläufer-Scheuersaugmaschine, batteriebetriebene Bodenreinigungsmaschine, industrielle Bodenreinigung, gebrauchte Tennant 5680 kaufen

Tahun pembuatan: 2020, Kondisi: baru, Ein neuer Cassel Ferrous in Foil Metalldetektor mit einem Durchlassmaß von 350 mm x 200 mm – diese Einheit wurde neu gekauft und nie benutzt – Metalldetektor zur industriellen Fremdkörpererkennung – Typ Metal Shark 2A BD – komplett mit englischer Bedienungsanleitung – weltweit sofort lieferbar ab Lager. Es handelt sich um einen digitalen Metalldetektor für Förderbandanwendungen – Gehäuse aus Edelstahl – Digitale Steuereinheit am Sensor montiert, Schutzart IP54. Das Ethernet-Modul ermöglicht Softwareanbindung (automatisierte Berichterstattung und Fernwartung). Geschätzte Empfindlichkeit basierend auf der Öffnungsgröße: Fe 3,5 – 4,5 mm. Hinweis: Die Detektionsleistung von Ferrous-in-Foil Metalldetektoren ist abhängig von der Produktgeschwindigkeit – Je schneller das Produkt durch die Öffnung bewegt wird, desto stärker wird das Metallsignal. Empfohlene Mindestbandgeschwindigkeit: 500 mm/s. Ledpfxjt Dkrco Al Norp Fragen Sie nach einem Video des Systems im Betrieb.

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, MESIN BENGKEL Dijual sebuah mesin bubut Drechselmeister Stratos FU 230 dengan tinggi antara pusat 230 mm. Mesin bengkel ini dalam kondisi sangat baik. Spesifikasi teknis: - Tinggi antara pusat 230 mm - Diameter ayun 455 mm (dengan perlengkapan tambahan untuk bubut luar, mencapai 800 mm!) - Jarak antara pusat sekitar 680 mm (dapat diperluas!) - Sambungan spindel M33 x 3,5 (dikeraskan) dengan alur pengaman ASR (Euro)* - Spindel dan kepala tetap (tailstock) dengan tirus MK2 - Kecepatan putar (2 tingkat sabuk): 60 – 1.350 RPM dan 180 – 3.750 RPM - Langkah spindel 100 mm (dengan skala dan ulir trapesium) - Motor 1,5 kW / 2 HP (koneksi 230 V) - Berat 178 kg Mesin ini berada di A-5431 Kuchl dan dapat diperiksa kapan saja selama jam kerja kami. Penjualan dapat dilakukan sewaktu-waktu! Lrodpfx Alezn Nvho Nsp Istilah terkait: Mesin bubut, mesin perkakas, mesin bubut, bubut kayu, membubut, pisau bubut, membubut kayu, bubut, mesin. Referensi: Bubut di B.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2020, B18OO Lredpfx Aloyucw To Nop

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, MESIN BENGKEL Dijual sebuah mesin bubut Drechselmeister Twister FU 200 dengan jarak antar pusat 715 mm. Mesin bengkel ini dalam kondisi sangat baik. Spesifikasi Teknis: - Tinggi pusat 200 mm - Diameter bubut 395 mm (dengan perlengkapan bubut luar opsional 700 mm) - Jarak antar pusat sekitar 715 mm (dapat diperluas secara opsional) - Sambungan spindel M33 x 3,5 dengan alur pengaman pembuangan ASR (Euro)* - Kerucut spindel dan kepala tetap MK2 - Kecepatan putar (2 tingkat sabuk): 60 – 1.350 RPM dan 180 – 3.750 RPM - Langkah spindel 100 mm (dengan ulir trapesium), siap untuk spindel bor ER-25 - Motor 1,5 kW / 2 HP (sambungan 230 V) - Sakelar rem 2 tingkat - Berat versi standar 166 kg Mesin ini berada di A-5431 Kuchl dan dapat diperiksa kapan saja selama jam buka kami. Penjualan dapat dilakukan sewaktu-waktu! Lrjdpfx Aljzn Nm Ts Nep Istilah terkait: Mesin bubut, mesin perkakas, mesin bubut, mesin bubut kayu, membubut, pahat bubut, bubut kayu, membubut, mesin Referensi: Drechs. am B.

Tahun pembuatan: 2022, Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Kami menawarkan mesin ekstruder kembar-ulir PMH DS25-32LD dari PMH (Plasticmaschinen handelsgesellschaft) yang sangat bagus, tahun pembuatan 2022. Produsen: PMH Plasticmaschinen handelsgesellschaft Model: Ekstruder kembar-ulir PMH DS25-32LD Tahun pembuatan: 2022 Kondisi: sangat bagus ID Kategori: 452 Tipe: Ekstruder kembar-ulir PMH PMH Compounder DS25-32LD, dengan ulir kembar bersegmen yang berputar bersamaan ("kondisinya seperti baru") Mesin ini dirancang dengan penggerak tiga fase 11 kW dan kotak roda gigi untuk mendistribusikan torsi sebesar 95 Nm pada 400 rpm. Kopling pengaman yang terpasang dikombinasikan dengan kontak pemutus jika terjadi beban berlebih. Tekanan lelehan maksimum yang diizinkan adalah 150 bar dan dipantau oleh sensor tekanan. Rumah individual memungkinkan Anda mengonfigurasi mesin secara fleksibel sesuai dengan kebutuhan Anda. Ulir bersegmen dengan diameter 25 mm dirancang dalam versi standar dengan beberapa zona pengadukan dan zona dekompresi (degasifikasi atmosfer). Lodpfxoznkx Ds Al Njrp Tutup penutup untuk zona dekompresi disertakan dalam cakupan pengiriman. Pemanas keramik dengan sensor termal dan kipas pendingin mengontrol suhu. Corong baja tahan karat dipasang pada lubang pengisian. Sistem kontrol elektrik terintegrasi ke dalam rangka mesin. Semua zona pemanas dialihkan secara nirkontak melalui relai keadaan padat. Panel sentuh yang dapat diputar tersedia untuk pengoperasian yang mudah digunakan. Pelat kepala dilengkapi dengan sensor tekanan massa. Sistem pemantauan tekanan massa mematikan penggerak ketika tekanan massa maksimum yang ditetapkan terlampaui. Adaptor alat dengan pelat nosel 4 lubang Opsi: Pompa vakum untuk zona degasifikasi (hanya degasifikasi atmosfer yang ditawarkan) Bak air sepanjang 3 meter Pisau udara Granulator untai bekas Jika Anda memiliki pertanyaan atau memerlukan informasi lebih lanjut, jangan ragu untuk mengirimkan pesan atau menghubungi kami.

Kondisi: bekas, nomor mesin/kendaraan: 008158, Lebar panel maksimum: 2200 mm Panjang panel maksimum: 4300 mm Diameter maksimum mata gergaji utama: 120 mm Jumlah penjepit: 9 Lodpsy Nku Defx Al Norp penekan fleksibel kedua: ya stasiun berputar: ya sistem pemuatan untuk bahan tipis: ya

Kondisi: bekas, nomor mesin/kendaraan: 005456, Lebar maksimum panel: 2200 mm Panjang maksimum panel: 4500 mm Maks. keluaran mata gergaji utama: 123 mm Lrjdpfx Aljwuz Dys Nep Jumlah penjepit memanjang: 8 Jumlah penjepit melintang: 5 Penahan fleksibel kedua: ya Stasiun berputar: ya

Kondisi: bekas, nomor mesin/kendaraan: 005711, Max. panel width: 4500 mm Max. panel length: 2200 mm Max. main saw blade projection: 95 mm Number of longitudinal clamps: 5 Number of cross clamps: 8 Lredsy Nk Dfjpfx Al Nep Second flexible hold-down: yes

Kondisi: sangat baik (bekas), Tahun pembuatan: 2017, Fungsionalitas: berfungsi sepenuhnya, Panjang potong: 4500 mm Kedalaman potong: 2200 mm Penonjolan mata pisau: 95 mm Lodpfxszaah Tj Al Nerp Grup mata pisau utama Grup scoring blade Jumlah penjepit: 9 1 meja depan dengan sistem bantalan udara 3 meja depan dengan sistem bantalan udara Kontrol: Biesse OSI Plus Printer label Meja angkat belakang Tersedia akhir Juli

Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2026, kapasitas angkut: 4.500 kg, Perangkat Kemiringan Kondisi: Perangkat Baru Lsdpfoyng Snsx Al Nerp Kondisi Teknis: Baru Deskripsi: Untuk forklift, dipasang pada carriage fork yang ada (ISO 3 – tinggi carriage 508 mm), dengan cakram bawah berulir, seri berat (A41), kapasitas angkat: 4500 kg, gaya tarik 180 Bar sekitar 4 ton, sudut kemiringan total sekitar 100°, panjang overhang sekitar 500 mm, titik berat sendiri sekitar 250 mm, 2 silinder hidrolik dengan peredaman di posisi akhir, posisi koneksi hidraulik fungsi utama di sebelah kanan searah gerak, sistem pengunci mekanik Euro di sisi attachment, warna RAL 7043.

Kondisi: baik (bekas), Tahun pembuatan: 1993, Mitre saw, saw unit right/left, double mitre saw, crosscut and mitre saw, double-end profiler -Manufacturer: Emmegi, Pressta Eisele, Double Mitre Saw Type SINGLE 2 HM500 -Cutting length: 250 to 5000 mm -Saw units: swiveling 45° -Saw blade: Ø 500 mm -Cutting data 90°: Cutting height 350 mm, cutting width 160 mm -Cutting data 45°: Cutting height 260 mm, cutting width 125 mm -Dimensions: 5750/1220/H1700 mm -Weight: 1200 kg Ledjtxkpropfx Al Njrp

Kondisi: sangat baik (bekas), Tahun pembuatan: 2024, Fungsionalitas: berfungsi sepenuhnya, LATHE FOR TRAINING ROOM For sale is a Drechselmeister Stratos FU 230 LV (Long Version) woodturning lathe with a center distance of 1,000 mm. The machine is in very good condition – it is a training room machine with low operating hours. Therefore, you receive the full warranty. Lsdpowud Izsfx Al Nsrp Technical Data - Center height: 230 mm - Swing diameter: 455 mm (up to 800 mm with optional outboard turning attachment!) - Center distance: approx. 955 mm with SPECIAL MODEL STRATOS FU-230 LV (can be further extended with optional bed extension!) - Spindle mount: M33 x 3.5 (hardened) with ASR (Euro) anti-unscrewing groove - Spindle and tailstock Morse taper: MK2 - Spindle speeds (2 belt ranges): 60–1,350 rpm and 180–3,750 rpm - Quill stroke: 100 mm (with scale and trapezoidal thread) - Motor: 2 HP (connection 230 V) - Weight SPECIAL MODEL LV: 195 kg The machine is located in A-5431 Kuchl and can be inspected at any time during our business hours. Subject to prior sale! Shipping by freight: Austria: € 105.00 incl. VAT Germany: € 125.00 incl. VAT South Tyrol: € 150.00 incl. VAT Related terms: woodturning lathe, lathe, turning machine, woodturning bench, woodturning, woodturning tools, wood turning, turning, machine Reference: 5912

Kondisi: bekas, Tahun pembuatan: 1994, fi Lsdju Nigkjpfx Al Nerp

Tahun pembuatan: 1963, Kondisi: bekas, Technical Details: Ram stroke - max.: 150 mm Workpiece diameter - max.: 250 mm Keyway width: 50 mm Feed rate: 10 m/min. Stroke adjustment: yes mm Voltage: 380 V Worktable: Ø 250 mm Total power requirement: 6.0 kW Machine weight approx.: 1.05 t Machine dimensions approx. LxWxH: 1.2 x 0.8 x 1.6 m Ljdpfeu Ng T Ujx Al Njrp Application: For internal keyway machining of flanges Broaching tool (drawbar) specifications: - Total length = 650 mm - Width = 10; 20; 30; 50 mm - Broaching length = approx. 150 mm Lubrication is provided via the drawbars. Equipment e.g.: 4x various drawbar guides (5; 22; 32 and 50 mm) 50x various flange adapters 23x broach holders shaft 18 mm; 12x shaft 22 mm; 7x shaft 26, 30, 40 and 45 mm Accessories included, see photo for details i.D.