Beli Traub Tnl26K bekas (99)

Kondisi: baik (bekas), Tahun pembuatan: 2005, jam operasional: 32.870 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 6030578, diameter pembubutan: 32 mm, kecepatan spindel (maks.): 8.000 rpm, Diameter batang (maks.): 32 mm, We offer for sale a Traub TNL26K automatic lathe. The machine is connected to power and can be inspected in operation by prior appointment. Year of manufacture: 2005 Spindle bore: 32 mm Main spindle: 6.7/10.7 kW; 8000 rpm Counter spindle: 6.7/10.7 kW; 8000 rpm Upper turret: 12 positions, 12x12/16x16 mm, driven tools 2/5.5 kW, 0-6000 rpm, 6.4/21 Nm Lower turret: 12 positions, 12x12/16x16 mm, driven tools 2/5.5 kW, 0-6000 rpm, 6.4/21 Nm Connected load: 24 kW Bar feeder: FMB Turbo 5-42/4200 mm Swarf conveyor: Knoll 240 S1/100 Djdsvldx Aspfx Airsuu Coolant compact band filter: Resy The machine comes with a large number of both static and driven tool holders—the list is shown in the attached photo.

Kondisi: siap digunakan (bekas), Traub 700 734 VEMEM/I interface board, bekas, kondisi terawat dengan baik, 100% berfungsi, lingkup pengiriman sesuai foto Duodpfx Asx Eu Tveireu

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2003, jam operasional: 124.706 h, kecepatan spindel (maks.): 6.300 rpm, jarak pergerakan sumbu X: 370 mm, jarak gerak sumbu Z: 250 mm, daya motor spindle: 10.700 W, produsen pengendali: TRAUB, model controller: TX8i (64-bit), jumlah sumbu: 6, This 6-axis TRAUB TNK 36 was manufactured in 2003. It features a maximum spindle speed of 6,300 rpm and a main spindle bore of 36 mm. The machine is equipped with advanced features such as tool monitoring, rigid tapping, and a high-pressure coolant system. If you are looking for a high-quality lathe, you should consider the TRAUB TNK 36 horizontal lathe that we are offering for sale. Contact us for further details. TECHNICAL DETAILS • MDE interface: Yes • Tool monitoring: Yes • Rigid tapping: Yes (without compensation chuck) • Main spindle bore: 36 mm • Main spindle drive power: AC 6.7 / 10.7 kW • Upper turret stroke X/Z: 50 / 100 mm • Rear attachment stroke X: 73 mm • Rear attachment stroke Y: ±50 mm • Main spindle C axis: Yes • Hainbuch quick change components: Yes • Hainbuch set-up aid base body: Yes • Hainbuch manual quick-change device: Yes • Counter spindle: Motor spindle • Counter spindle C axis: Yes • Bar loader pressure management device: Yes • Workpiece ejector: Yes • Hainbuch Axfix chuck: Yes • Upper tool carrier: Yes • Electronic gearbox: Yes • X3 transverse axis for front attachment: Yes • Front unit: 5-position • Driven tools at front unit: Yes • Cut-off side machining station: Yes • Driven tools at cut-off station: Yes • Workpiece unloading device: Gripper • Coolant tank capacity: 230 l • Coolant pressure: 7 bar • Coolant flow rate: 50 l/min • Internal coolant supply: 30 bar • High-pressure coolant: 120 bar (front and rear machining station) • Coolant filter: Knoll VRF 150/750 vacuum rotary filter • Suitable filter materials: Aluminium, plastics, brass, steel • Washdown gun: Yes • Connected power: 22 kW • Maximum bar length: 3 m • Maximum bar diameter: 36 mm • Operating voltage: 400 V, 3~, 50 Hz • Control voltage: 24 V AC • Valve voltage: 24 V DC • Clutch voltage: 24 V DC • Total installed power: 33 kW • Rated total current: 60 A OPTIONAL EXTRA EQUIPMENT • FMB turbo 5-42 XT / 3200 "C" bar feeder • Bar loader year: 2003 • Hinged belt chip conveyor • Chip conveyor discharge height: 950 mm • Guide tubes D25, D36 • Live part stop, shaft 16 × 16 mm • Brankamp CMS 100 collision monitoring Technical Specification Through-spindle Coolant Yes Counter Spindle Yes Driven Tools Yes Duedpsza Ucxofx Airsu

Kondisi: bekas, CNC lathe TRAUB Type TND 400 Serial No. 708 Year of manufacture 1996 CNC control TRAUB TX 8 F Nominal turning diameter: 400 mm Swing diameter over bed max. 470 mm Spindle bore in draw tube: 65 mm Spindle drive motor power: 22 kW Total power requirement: 35 kW Power supply: 380 Volt, 50 Hz - Electronic handwheel - RS 232 data interface - Disc turret with 12 tool stations VDI 40 Dusdpfx Aiezacwderju - incl. 8 tool holders VDI 40 - 3-jaw power chuck Ø 225 mm SMW Autoblok, Type KNCS-N- Ø 225-65 plus a large assortment of chuck jaws - Hydraulic hollow clamping cylinder SMW, Type ZHDAS-130-67 - Chip conveyor KNOLL, Type 200 S-1/600 - Coolant system - Adjacent hydraulic power unit (L x W x H 650 x 500 x 1000 mm) Required floor space L x W x H: 4800 x 2000 x 2100 mm Main machine footprint L x W x H: 3500 x 2000 x 2100 mm Chip conveyor footprint L x W x H: 4500 x 700 x 1550 mm Weight approx. 5 tons Good condition Machine is ready for demonstration. The hollow clamping cylinder for workpiece clamping needs to be repaired.

Kondisi: baik (bekas), Tahun pembuatan: 1982, Fungsionalitas: berfungsi sepenuhnya, Mesin bubut CNC Traub TND360, TX8, tahun 1982, No. mesin >600 1 revolver, kepala lepas, konveyor serbuk, silinder penjepit berlubang, chuck 3 rahang KNCS250. Dujdpfxezcdnve Aireu Gambar diambil saat mesin dalam produksi. Mesin dapat diperiksa dalam kondisi menyala.

Kondisi: baik (bekas), Tahun pembuatan: 1990, Fungsionalitas: berfungsi sepenuhnya, Traub CNC Bubut TNA480, TX8D, th. 1990, No. Mesin >550 Sumbu C, penggerak alat putar, 1 revolver VDI40, kepala lepas, konveyor serpihan, silinder penjepit berongga, chuck 3 rahang KNCS315. Kondisi baik, siap pakai Geometri mesin sudah diperiksa dan dikoreksi/disetel Pengikis + sabuk diperiksa, diganti, servis 4000 jam. Dedpezcdgfefx Airouu Foto diambil saat mesin beroperasi, mesin akan dibersihkan dan diperiksa lagi. Mesin dapat dilihat dalam kondisi hidup.

Kondisi: baik (bekas), Fungsionalitas: berfungsi sepenuhnya, 1 x mesin bubut otomatis Traub A 25 Perlengkapan: Tailstock bor Perangkat pembubutan panjang Pengumpan berat Djdpfszcdp Hex Airouu Mesin lengkap dan bagus dalam kondisi teknis sangat baik. Mesin dapat dilihat dalam keadaan menyala.

Kondisi: baik (bekas), No. Artikel internal: 25088 Pemegang alat Pemegang swirling ulir termasuk insert pemotong Index / Traub Djdpfx Asxu Dcvjireuu No.: 12068219 Alat ini digunakan pada mesin Traub TNL18 Kondisi sangat terawat!

Kondisi: baik (bekas), No. Artikel internal: 25089 Pemegang alat Dodpfx Ajxu Uu Asirjuu Pemegang ulir spiral Index / Traub No.: W7045012B Kondisi sangat terawat! Pemegang ini digunakan pada mesin Traub TNL18.

Kondisi: bekas, Tahun pembuatan: 2005, Technical Details: Turning diameter: 275 mm Turning length: 900 mm Spindle bore: 65 mm Drive power 100% duty cycle: 25/20 kW Spindle speeds: 1 - 5000 rpm Spindle diameter at front bearing: 110 mm C-axis: 1 - 500 rpm Number of tool carriers: 4 Turret: 1 X-axis: 290 mm Y-axis: 165 mm Z-axis: 360 mm B-axis: 360° Rapid traverse speed: 18/30 m/min Number of tools: 2x2 + 2x2 Number of driven tools: 2x2 + 2x2 mm Tool speeds: 8000 / 2000 rpm Drive power: 25% duty cycle 5.8 kW Tool holder: TRAUB 60 Turret: 2/3/4 X-axis: 170 mm Z-axis: 600/950 mm Y-axis: +/- 60 mm Rapid traverse speed: 18/15/30 m/min Number of driven tools: 10 mm Tool speeds: 1 - 6000 rpm Drive power: 25% duty cycle 5.8 kW Tool holder: DIN 69880 40 x 63 Total connected load: 95 kW Machine weight approx.: 16 t Space requirement approx.: 10.0 x 3.5 x 3.0 m with CNC TRAUB TX 8i, bar loader TRAUB Stamag DNH61 / 3000, Main and counter spindle with C-axis 1 vertical tool carrier with B-axis 3 turret tool carriers Extraction unit, coolant system with coalescence separator and chip conveyor Dujdpfx Ajwp D Nboireu 2 pcs. 3-jaw chucks SMW KNCS-N 170-43 2 pcs. HAINBUCH Spanntop collet chucks 40 pcs. various non-driven tool holders 6 pcs. various driven tool holders Spare parts package

Kondisi: bekas, Tahun pembuatan: 1990, translation_001 Djdpfx Ajw I R Ndoirouu

Kondisi: bekas, Tahun pembuatan: 1988, Technical details: Swing diameter over bed: 360 mm Swing diameter over cross slide: 160 mm Turning length: 800 mm Longitudinal travel (Z-axis): 810 mm Cross travel (X-axis): 205 mm CNC control: TX-8 Spindle bore: 60 mm Spindle speed: 63 - 3,150 rpm / 2-stage Rapid traverse: 10,000 mm/min Tool turret - number of stations: 8 Operating hours / on-time hours: 8,834 h Tailstock taper: SK30 DIN 2080 Tailstock quill stroke: 105 mm Operating pressure: 40 bar Total power requirement: 38 kW Machine weight approx.: 3.1 t Machine dimensions approx. (LxWxH): 1.8 x 3.3 x 1.8 m Hydraulic unit dimensions: 580 x 400 x 750 mm Equipment: 200 mm diameter hydraulic chuck (without jaws) Dujdpfxju Rqabj Airou Feed force Z-axis = 8 kN and X-axis = 5 kN Coolant system Control panel Accessories: Fine adjustment device for tool setup

Kondisi: bekas, Tahun pembuatan: 1993, Detail Teknis: Gerak x: 400 mm Gerak y: 300 mm Gerak z: 400 mm Kecepatan spindle: 8000 rpm Kontrol: Fanuc OM Meja penjepit: 500x300 mm Jumlah tempat magazin: 16 buah Taper alat: SK40 Jarak spindle kerja/permukaan penjepit maks.: 50-450 mm Jumlah palet: 2 buah/part Dujdpfx Aiju Idn Hsreu Kebutuhan daya total: 10 kW Berat mesin sekitar: 2,5 t Dimensi mesin (PxLxT): 2,4x1,8x2,5 m Ukuran transportasi mesin: 2,45x1,8x2,5 m - Lemari listrik - Sistem pendingin - Konveyor serpihan merk META (Tinggi angkut 1500mm; Lebar 200mm) Fungsi pergantian meja tidak beroperasi.

Kondisi: bekas, Tahun pembuatan: 1987, en-GB: Technical Details: Swing diameter over bed: 180 mm Turning length: 490 mm Max. workpiece diameter: 450 mm Cross travel (Z-axis): 168 mm Control: Traub TX8D Spindle speed: 20 - 4000 rpm Spindle bore: Ø 60 mm Operating hours (power-on): 23,495 h Tool turret: 12 stations Total power requirement: 38 kW Machine weight approx.: 4.2 t Machine dimensions approx. LxWxH: 3.6 x 2.5 x 2.2 m Tool holder: cylindrical shaft DIN 69880 (VDI 3425) Ø 40x63 Dsdou Ix N Sepfx Airjuu Röhm lathe chuck Ø 200 mm, hydraulic clamping Operation via double foot switch and control panel/operator desk Coolant system The TRAUB features an integrated chip conveyor with an ejection height of 1,100 mm (currently not functional). Accessories: various small parts 8 machine feet (various) without tailstock as is.

Kondisi: baik (bekas), Tahun pembuatan: 1996, CNC turning center TRAUB Type: TNC65 DG, Year of manufacture: 1996, Control: TRAUB TX8F Dedpfx Aiju Eug Ierouu Comes with extensive accessories.

Kondisi: bekas, TECHNICAL DATA - Number of spindles: 2 MAIN SPINDLE - Max. bar diameter: 18 [mm] - Spindle speed: 12,000 [rpm] - Spindle drive power: 3.0 / 5.5 [kW] - Minimum C-axis resolution: 0.001 [degrees] - Travel Z: 205 [mm] SUB SPINDLE - Max. bar diameter: 20 [mm] - Spindle speed: 12,000 [rpm] - Spindle drive power: 1.5 / 2.5 [kW] - Minimum C-axis resolution: 0.001 [degrees] - Number of turrets: 2 UPPER TURRET - Number of positions: 8 - Number of driven positions: 8 - Driven tool speed: 12,000 [rpm] - Driven tool power: 1 / 2 [kW] - Travel X/Z: 165 / 550 [mm] - Travel Y: -40 / +25 [mm] - Rapid traverse speed (X/Y/Z): 21 / 21 / 42 [m/min] - B-axis travel: 100 [degrees] LOWER TURRET - Number of positions: 7 - Number of driven positions: 7 - Driven tool speed: 12,000 [rpm] - Driven tool power: 1.5 / 2.5 [kW] - Travel X/Z: 120 / 250 [mm] - Travel Y: -20 / +40 [mm] - Rapid traverse speed (X/Y/Z): 21 / 21 / 50 [m/min] COUNTER OPERATIONS - Number of positions: 7 - Number of driven positions: 3 - Driven tool speed: 10,000 [rpm] - Driven tool power: 1 / 2 [kW] ELECTRICAL SUPPLY - Supply voltage: 400 [V] - Total connected load: 24 [kVA] WEIGHT AND DIMENSIONS - Footprint: 3,060 x 1,480 [mm] - Machine height: 2,420 [mm] - Machine weight: 4,300 [kg] MACHINE HOURS - Operating hours: 14,998 [h] Djdpfx Aiezbvnlereuu - Spindle hours: 11,177 [h] ACCESSORIES - Control: Traub TX 8i-s - Driven guide bushing - Parts removal - Parts conveyor belt - Chip conveyor - Coolant tank * with high-pressure pump * with paper filter - Bar loader: IEMCA ELITE 220 / 32 XL - Oil mist extraction: ELBARON RON/A 1500 DH - Fire extinguishing system * * NB: Functionality not guaranteed. To be checked by a qualified company commissioned by the buyer.

Kondisi: baik (bekas), Tahun pembuatan: 2003, en Dsdpfx Aiezaud Aorjuu

Tahun pembuatan: 1993, Kondisi: bekas, nomor mesin/kendaraan: 156, Kontrol CNC Traub Sistem TX8 F, dengan 1 revolver dengan 6 posisi alat dan 1 revolver lagi dengan 6 posisi alat, alat bertenaga, kapasitas batang 30 mm, dilengkapi dengan unit penyaring kain non-woven, sistem pendingin, dan majalah pemuatan batang otomatis. Dsdpfey Sqkwjx Airouu

Kondisi: bekas, Tahun pembuatan: 2008, nomor mesin/kendaraan: 7041245, CNC kontrol Traub Sistem TX8 I, diameter batang 42 mm, panjang pembubutan maks. 450 mm, kecepatan putar maks. 8000 rpm, 2 revolver masing-masing dengan 10 posisi alat, alat yang digerakkan, perangkat pendingin, konveyor serbuk KNOLL 240 S-1/50, sistem filtrasi/filter sabuk kompak RESY Dsdpfx Aey Sqg Eoirsuu

Kondisi: bekas, Tahun pembuatan: 2004, nomor mesin/kendaraan: 1057, Kontrol CNC TRAUB Sistem TX 8 H, diameter batang lewat 42 mm, panjang putar maksimum 450 mm, kecepatan putar maksimum 8000 rpm, 2 revolver masing-masing dengan 10 posisi alat, alat bertenaga, sistem filter sabuk KNOLL RP, konveyor serpihan. Dusdoy Sqhiepfx Aireu

Kondisi: bekas, Tahun pembuatan: 2007, nomor mesin/kendaraan: 7041219, Kontrol CNC Traub System TX8 I, diameter batang 42 mm, panjang pengerjaan maksimal 450 mm, kecepatan putar maksimum 8000 rpm, 2 revolver masing-masing dengan 10 posisi alat, alat penggerak, konveyor serbuk KNOLL 240 S-1/50, sistem filtrasi/compact band filter RESY KBF 452/500 Duedpfoy Sqg Sjx Airju

Kondisi: bekas, Tahun pembuatan: 2007, nomor mesin/kendaraan: 7041201, Kontrol CNC Traub Sistem TX8 I, diameter batang 42 mm, panjang pembubutan maksimum 450 mm, kecepatan putar maksimum 8000 rpm, 2 revolver masing-masing dengan 10 slot alat, alat berpenggerak, konveyor serpihan KNOLL 240 S-1/50, sistem filtrasi/filter belt kompak RESY KBF 452 Duodpfey Sqhcox Aireu

Kondisi: bekas, Tahun pembuatan: 1992, nomor mesin/kendaraan: 690, Sistem kontrol CNC Traub TX8 D, dengan 1 revolver dengan 14 posisi alat dan 1 revolver dengan 9 posisi alat, alat bertenaga, panjang putar maks. sekitar 1000 mm, diameter lewat batang 80 mm, daya 73 KW, dengan sistem filter nonwoven dan konveyor serpihan. Duodpfx Aioy Sqimoreu

Tahun pembuatan: 2003, Kondisi: siap digunakan (bekas), Tool monitoring, thread cutting without compensating chuck, main spindle: spindle bore: 36mm, max. speed: 6300 rpm, drive power: AC 6.7/10.7 kW, C-axis, Hainbuch interchangeable parts, base body installation aid, Hainbuch manual quick-change device, counter spindle: counter spindle as motor spindle, C-axis, setup for counter spindle pressure, workpiece ejector device, Hainbuch Axfix chuck, upper tool turret, driven tools, electronic gearbox, X3 cross-axis for front unit, 5-position front tool holder and parting/offside machining station with driven tools. Machine and control cabinet RAL 7037 (dust grey), covers RAL 7035 (light grey), workpiece discharge device: workpiece gripper, gripper jaws D5-8, D8-20, D20-36. Coolant system: tank 230l/7bar/50l/min, internal coolant supply 30bar, high pressure 120bar at the front and rear machining stations, Knoll VRF 150/750 vacuum rotary filter (suitable for aluminum, plastic, brass, and steel), rinse gun. Connected load: 33kW, control: TX8i (64bit), 10.4 inch flat screen monitor, additional part counter, V24 RS232 and MDE interface in the control cabinet. Operating hours: 124,705h, with FMB TURBO 5-42XT/3200/C bar feeder, chip conveyor, coolant unit and basic set of static and driven tool holders. On-site inspection is possible. Djdpfxey U Nq Io Airjuu

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2009, jam operasional: 87.094 h, kecepatan spindel (maks.): 4.000 rpm, jarak pergerakan sumbu X: 140 mm, jarak gerak sumbu Z: 450 mm, daya motor spindle: 18.500 W, tinggi total: 1.917 mm, lebar total: 2.076 mm, berat keseluruhan: 5.200 kg, produsen pengendali: TRAUB, model controller: TX8i, panjang produk (maks.): 4.354 mm, jumlah slot dalam magazin alat: 10, jumlah sumbu: 7, TRAUB TNC 65 DGY 7-sumbu ini diproduksi pada tahun 2009. Mesin ini dilengkapi dengan turret alat yang kuat dengan kecepatan spindle hingga 4000 rpm dan sistem pendingin tekanan tinggi dengan tingkatan tekanan yang dapat diprogram. Mesin ini dirancang untuk pemesinan logam dan plastik, serta dilengkapi dengan sumbu C untuk proses pembubutan dan pemposisian yang dikendalikan secara numerik. Jika Anda mencari mesin bubut berkualitas tinggi, pertimbangkan TRAUB TNC 65 DGY horizontal lathe yang kami tawarkan untuk dijual. Hubungi kami untuk detail lebih lanjut. Dodpfjy Sg Nijx Airjuu