Beli Turck Blident Tnlr-Q80L400-H1147 bekas (37)

Kondisi: baik (bekas), Sensor, write head, read head, read-write head Isdogpri Tspfx Alcstg -Manufacturer: Turck Blident, read-write head -Type: TNLR-Q80L400-H1147 -Voltage: 24 VDC -Dimensions: 415/80/H25 mm -Weight: 1.1 kg

Kondisi: siap digunakan (bekas), Turck TBEN-LG-16DOP Modul I/O Multiprotokol Kompak untuk Ethernet, versi F/W V3.1.3.0, bekas, tanda pemakaian normal, 100% berfungsi, paket pengiriman sesuai foto. Isdpfx Aljxaicrjcotg

Kondisi: bekas, Limit value signal transmitter, logic controller, trigger point control, multisafe switching amplifier, level monitor -Manufacturer: Turck, multisafe limit value signal transmitter in original packaging -Type: MS43-12-R -Quantity: 3 modules available Isdpfslfig Uox Alcetg -Price: per piece -Box dimensions: 130/60(H80) mm -Weight: 0.3 kg/unit.

Kondisi: bekas, Limit value signal transmitter, logic controller, trip point controller, multisafe switching amplifier, level monitor -Manufacturer: Turck, Multisafe limit value signal transmitter, original packaging -Type: MS91-12-R -Quantity: 1 module available Itedpfx Alelfihrocsg -Price: per piece -Box dimensions: 130/60 (H80) mm -Weight: 0.4 kg/piece.

Kondisi: bekas, Measuring transducer, power measuring transducer, active power measuring transducer, analog converter, frequency/analog converter, frequency divider, isolating converter, signal converter, isolating transducer, switching amplifier -Manufacturer: Turck, Multi Safe Switching Amplifier OVP -Type: MS13-22ExO-T -Carton dimensions: 130/60/H80 mm Iodpfxslfihcj Alcstg -Weight: 0.4 kg

Kondisi: baik (bekas), Inductive sensor - 10–65 VDC, 200 mA - Sensing distance (Sn): 40 mm Ijdpeb A N Nrefx Alcjtg - Model: B5MNH - Quantity available: 10 units - Price: per unit - Weight: 0.5 kg

Kondisi: baik (bekas), Inductive sensor -10–65 VDC, 200 mA -Sensing distance: 100 mm -Quantity: 5 units available -Price: per unit Itedpfx Alsb A N Nqoceg -Weight: 1 kg

Kondisi: siap digunakan (bekas), Turck TBEN-L4-8DIP-8DOP Modul I/O multiprotokol kompak untuk Ethernet, F/W Versi 3.2.9.0, bekas, dengan tanda-tanda pemakaian normal, 100% berfungsi, pengiriman sesuai foto. Itsdpfexaiclex Alceg

Kondisi: siap digunakan (bekas), Turck LT300M-Q21-LU0X3-H1141 sensor linear posisi, 300 mm, SN:130460B014908, bekas, kondisi baik, 100% berfungsi, kelengkapan sesuai foto. Iedpfx Aexaicfolcjtg

Kondisi: baru, Tahun pembuatan: 2025, gaya penekanan: 500 t, panjang langkah: 1.000 mm, lebar meja: 1.200 mm, panjang meja: 1.500 mm, tekanan kerja: 250 batang, Perlengkapan: dokumentasi / manual, penghadang cahaya keselamatan, CRONOSSTECH CHP 500 H-Type Single-Acting Hydraulic Press – 8-Guided Slides General Description The CRONOSSTECH CHP series H-type single-acting hydraulic presses are high-rigidity industrial press solutions developed for sheet metal forming, straightening, assembly, and die pressing applications. The 8-slide H-frame design ensures balanced distribution of the high loads generated during pressing, guaranteeing stable and repeatable operation. Model CHP 500 is engineered for long-lasting and reliable performance in heavy-duty production processes requiring high tonnage. CHP Series – Structural Features The CHP series presses are engineered for heavy-duty conditions. The frame and load-bearing components are stress-relieved through vibration. Bronze Zr14 slide bearings ensure smooth load distribution and long-term precision throughout the ram’s travel. ⚙️ Standard Equipment - Steel construction, 8-slide H-frame press body - Stress-relieved frame and carrier parts by vibration - Bronze Zr14 slide bearings - Welding applications approved for WPQR & WPS with TÜRK-AK accreditation (EN ISO 15614-1:2017 / EN ISO 14731) - Machine structure designed and manufactured in compliance with CE standards - PLC-controlled hydraulic system - Touch panel display (DELTA 7”) - Adjustable ram stroke and tonnage control - Automatic lubrication system - Electronically controlled filter contamination warning - Display of hydraulic unit oil temperature and system status on-screen - Cooling system - Off-line filtration - Two-hand control system - Light barrier (standard for operator safety) - SIEMENS – SCHNEIDER switchgear 📐 Technical Specifications – CHP 500 Type: Steel construction, 8-slide H-frame press Body Material: St52 – ERDEMİR Slide Bearings: Bronze Zr14 Capacity (Ram): 500 Tons Movable Table Size: 1200 × 1500 mm Fixed Table Size: 1200 × 1500 mm Parallelism Tolerance: 120 micron/m Perpendicularity Tolerance: 60 micron/m Stroke (Ram): 1000 mm Min. Clearance: 100 mm Max. Clearance: 1100 mm Weld Stress Relief: Vibration stress relief Welding Application: WPQR & WPS certification accredited by TÜRK-AK according to EN ISO 15614-1/2017 (Supervised by certified welding coordination engineers per EN ISO 14731) Max. Working Pressure: 250 Bar Total Motor Power: 45 kW – IE3 Main Pump: 70 cm³ – REXROTH or PARKER Movable Table Fast Down Speed: 150 mm/s Movable Table Drawing Speed: 12 mm/s Movable Table Return Speed: 170 mm/s Main Cylinder Inner Diameter: Ø500 mm – Ck45 Auxiliary Acceleration Cylinders: 2 units Approx. Height: 5800 mm Approx. Width: 3250 mm Approx. Depth: 2200 mm Lower Table Height from Ground: 1400 mm Pre-fill Valve: NG 150 Hydraulic Unit: REXROTH or PARKER Cooling System: EMMEGI – CIESSE – PARKER Off-line Filtration: REXROTH or PARKER Linear Scale: NOVATECHNIK or TURCK PLC Application: DELTA Touch Panel Display: DELTA 7” Switchgear: SIEMENS – SCHNEIDER Approx. Weight: 23 Tons Production Note Iodox N T H Aopfx Alcetg This machine is manufactured by CRONOSSTECH in Turkey.

Kondisi: baru, Tahun pembuatan: 2025, gaya penekanan: 1.000 t, panjang langkah: 1.000 mm, lebar meja: 1.500 mm, panjang meja: 2.000 mm, tekanan kerja: 250 batang, Perlengkapan: dokumentasi / manual, penghadang cahaya keselamatan, CRONOSSTECH CHP 1000 H-Frame Single-Acting Hydraulic Press – 8 Guideways General Description The CRONOSSTECH CHP series H-frame single-acting hydraulic presses are designed for sheet metal forming, deep drawing, straightening, and heavy-duty pressing applications that require high tonnage. The 8-guided H-frame structure distributes the high forces generated during pressing evenly, providing maximum rigidity, precision, and long service life. The CHP 1000 model is developed to deliver reliable and stable performance for heavy industry production lines. Itedpfxsx N T Rbs Alcog CHP Series – Structural Features CHP series presses are engineered to withstand the demanding conditions of heavy industry. The frame and main supporting structures are stress-relieved using vibration methods. Bronze Zr14 guide bushings ensure smooth load distribution and high precision throughout the ram movement. ⚙️ Standard Equipment • Steel construction, 8-guideway H-frame press body • Stress-relieved frame structure by vibration • Bronze Zr14 guide bushings • WPQR & WPS certified welding applications accredited by TÜRK-AK (EN ISO 15614-1:2017 / EN ISO 14731) • Design and manufacturing in compliance with CE standards • PLC-controlled hydraulic system • Touch panel display (DELTA 7”) • Adjustable ram stroke and tonnage control • Automatic lubrication system • Electronic filter contamination indicator • Monitoring of hydraulic unit oil temperature and system status via display • Cooling system • Off-line filtration • Two-hand control system • Light curtain (operator safety as standard) • SIEMENS – SCHNEIDER switchgear components 📐 Technical Specifications – CHP 1000 Type: Steel construction, 8-guideway H-frame press body Frame Material: St52 – ERDEMİR Guide Bushings: Bronze Zr14 Capacity (Ram): 1000 Tons Moving Table Size: 1500 × 2000 mm Fixed Table Size: 1500 × 2000 mm Parallelism Tolerance: 120 micron/meter Perpendicularity Tolerance: 60 micron/meter Stroke (Ram): 1000 mm Min. Daylight: 100 mm Max. Daylight: 1100 mm Weld Stress Relief: Vibration stress relief Welding Application: EN ISO 15614-1/2017 certified by TÜRK-AK for WPQR and WPS Max. Working Pressure: 250 Bar Total Motor Power: 75 kW – IE3 Main Pump: 70 cm³ – REXROTH or PARKER Moving Table - Fast Approach Speed: 150 mm/sec Moving Table - Pressing Speed: 12 mm/sec Moving Table - Return Speed: 170 mm/sec Main Cylinder Bore: Ø500 mm – Ck45 (2 pcs) Auxiliary Acceleration Cylinders: 2 pcs Approx. Press Height: 6000 mm Approx. Press Width: 3450 mm Approx. Press Depth: 2400 mm Distance from Floor to Lower Table: 1450 mm Pre-fill Valve: NG 200 Hydraulic Unit: REXROTH or PARKER Cooling System: EMMEGI – CIESSE – PARKER Off-line Filtration: REXROTH or PARKER Linear Position Transducer: NOVATECHNIK or TURCK PLC Application: DELTA Touch Panel Display: DELTA 7” Switchgear: SIEMENS – SCHNEIDER Approx. Weight: 55 Tons Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Kondisi: baru, Tahun pembuatan: 2025, gaya penekanan: 1.200 t, panjang langkah: 1.000 mm, lebar meja: 1.500 mm, panjang meja: 2.000 mm, tekanan kerja: 250 batang, Perlengkapan: dokumentasi / manual, penghadang cahaya keselamatan, RONOSSTECH CHP 1200 H-Type Hydraulic Deep Drawing Press – 8 Way Guided General Description The CRONOSSTECH CHP Series H-Type Hydraulic Deep Drawing Presses are specifically designed for deep drawing, forming, shaping, and heavy-duty pressing applications. The 8-way guided H-frame structure ensures maximum rigidity, stability, and precision under high tonnage loads. The CHP 1200 model delivers reliable and long-lasting performance for demanding industrial production lines requiring high force. The frame is stress-relieved by vibration, ensuring even load distribution during pressing operations and maintaining parallelism and perpendicularity tolerances. ⚙️ Standard Equipment - Steel construction, 8-way guided H-frame press body - Stress-relieved frame by vibration - Bronze Zr14 slideways - WPQR and WPS certified welding applications accredited by TÜRK-AK (EN ISO 15614-1:2017 / EN ISO 14731) - Design and manufacturing according to CE standards - PLC-controlled hydraulic system - Touchscreen panel (DELTA 7”) - Adjustable ram stroke and tonnage control - Automatic lubrication system - Electronically monitored filter contamination alert - On-screen monitoring of hydraulic unit oil temperature and system status - Cooling system - Off-line filtration - Safety systems for operator protection - SIEMENS – SCHNEIDER electrical components 📐 Technical Specifications – CHP 1200 Type: Steel construction, 8-way guided H-frame press body Frame Material: St52 – ERDEMİR Slideway Bearings: Bronze Zr14 Capacity (Ram): 1200 Tons Moving Table Dimensions: 1500 × 2000 mm Fixed Table Dimensions: 1500 × 2000 mm Parallelism Tolerance: 120 micron/m Perpendicularity Tolerance: 60 micron/m Stroke (Ram): 1000 mm Min. Daylight: 100 mm Max. Daylight: 1100 mm Stress Relief: Vibration-based stress relieving Welding Application: WPQR and WPS certified welding, accredited by TÜRK-AK and compliant with EN ISO 15614-1/2017 Max. Working Pressure: 250 Bar Total Motor Power: 75 kW – IE3 Main Pump: 70 cm³ – REXROTH or PARKER Moving Table Rapid Descent Speed: 150 mm/sec Moving Table Drawing Speed: 12 mm/sec Moving Table Return Speed: 170 mm/sec Main Cylinder Internal Diameter: Ø560 mm – Ck45 (2 pcs) Auxiliary Acceleration Cylinders: 2 pcs Approximate Press Height: 6100 mm Approximate Press Width: 3550 mm Approximate Press Depth: 2400 mm Lower Table Height from Floor: 1450 mm Pre-fill Valve: NG 200 Hydraulic Unit: REXROTH or PARKER Cooling System: EMMEGI – CIESSE – PARKER Off-line Filtration: REXROTH or PARKER Linear Distance Ruler: NOVATECHNIK or TURCK Itjdpfx Alox N T Rujceg PLC Application: DELTA Touchscreen Panel: DELTA 7” Switchgear: SIEMENS – SCHNEIDER Approximate Weight: 60 Tons Production Note This machine is manufactured in Turkey by CRONOSSTECH.

Kondisi: baru, Tahun pembuatan: 2025, gaya penekanan: 2.500 t, panjang langkah: 1.000 mm, lebar meja: 1.800 mm, panjang meja: 2.600 mm, tekanan kerja: 250 batang, Perlengkapan: dokumentasi / manual, penghadang cahaya keselamatan, CRONOSSTECH CHP 2500 H-Type Hydraulic Press – 8-Guided Slides General Description The CRONOSSTECH CHP series H-type hydraulic presses are engineered for heavy-duty forming, deep drawing, and metal spinning applications that require extremely high tonnage. The 8-slide H-frame design ensures maximum rigidity throughout the pressing operation, maintaining parallelism and squareness tolerances consistently over long strokes. The CHP 2500 model features large table dimensions, a multi-cylinder main pressing system, and a high-capacity hydraulic unit, making it suitable for automotive, heavy industry, defense industry, and high-tonnage die applications. The frame is stress-relieved by vibration to ensure long-lasting and reliable operation. ⚙️ Standard Equipment - Steel construction, H-frame press body with 8-guided slides - Vibration stress-relieved welded frame - Bronze Zr14 slide bearings - Welded joints approved by WPQR and WPS in accordance with TÜRK-AK accreditation (EN ISO 15614-1:2017 / EN ISO 14731) - Design and manufacturing in compliance with CE standards - PLC-controlled hydraulic system - 7" DELTA touchscreen control panel - Adjustable ram stroke and tonnage control Ijdpox N T S Ejfx Alcetg - Automatic lubrication system - Electronic filter contamination warning - Real-time display of hydraulic oil temperature and system status - Cooling system - Off-line filtration - Safety systems for operator protection - SIEMENS – SCHNEIDER electrical components 📐 Technical Specifications – CHP 2500 - Type: Steel construction, H-frame with 8-guided slides - Frame Material: St52 – ERDEMİR - Slide Bearings: Bronze Zr14 - Capacity (Ram): 2500 Tons - Moving Table Size: 1800 × 2600 mm - Fixed Table Size: 1800 × 2600 mm - Parallelism Tolerance: 120 microns/m - Squareness Tolerance: 60 microns/m - Stroke (Ram): 1000 mm - Min. Daylight: 200 mm - Max. Daylight: 1200 mm - Weld Stress Relief: By vibration - Weld Certification: WPQR and WPS certified by TÜRK-AK, per EN ISO 15614-1/2017 - Max. Working Pressure: 250 Bar - Total Motor Power: 180 kW – IE3 - Main Pump: 140 cm³ – REXROTH or PARKER - Rapid Down Speed (Moving Table): 150 mm/s - Forming Speed (Moving Table): 12 mm/s - Return Speed (Moving Table): 170 mm/s - Main Cylinder Bore: Ø565 mm – Ck45 (4 units) - Auxiliary Acceleration Cylinders: 2 units - Approx. Press Height: 6500 mm - Approx. Press Width: 3950 mm - Approx. Press Depth: 2600 mm - Bed Height from Floor: 1500 mm - Pre-fill Valve: NG 200 - Hydraulic Unit: REXROTH or PARKER - Cooling System: EMMEGI – CIESSE – PARKER - Off-line Filtration: REXROTH or PARKER - Linear Distance Sensor: NOVATECHNIK or TURCK - PLC: DELTA - Touchscreen Control Panel: DELTA 7” - Electrical Components: SIEMENS – SCHNEIDER - Approx. Weight: 120 Tons Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Kondisi: baru, Tahun pembuatan: 2025, gaya penekanan: 100 t, panjang langkah: 600 mm, lebar meja: 1.000 mm, panjang meja: 1.200 mm, gaya penarikan balik: 40 t, tekanan kerja: 250 batang, Perlengkapan: dokumentasi / manual, penghadang cahaya keselamatan, CRONOSSTECH CHSP 100/40 H-Type Hydraulic Deep Drawing (Spinning) Press – 8 Guideways General Description The CRONOSSTECH CHSP series H-type hydraulic deep drawing presses have been developed with a double-acting working principle to ensure controlled material flow in sheet metal forming, deep drawing, and spinning applications. Thanks to the 8-guideway H-frame structure, maximum rigidity is achieved throughout the pressing process; parallelism and perpendicularity tolerances are maintained consistently during the entire stroke. The CHSP 100/40 model, with a main ram capacity of 100 tons and a lower cushion (pot) capacity of 40 tons, is designed for precise deep drawing and spinning operations. The frame structure is stress-relieved by vibration to ensure long-lasting and reliable operation. ⚙️ Standard Equipment - Steel construction, 8-guideway H-frame press body - Vibration stress-relieved frame structure - Bronze Zr14 sliding bearings - WPQR and WPS certified welding applications accredited by TÜRK-AK (EN ISO 15614-1:2017 / EN ISO 14731) - Design and manufacturing compliant with CE standards - PLC-controlled hydraulic system - Touch screen panel (DELTA 7”) - Adjustable ram and cushion stroke control - Adjustable ram and cushion tonnage (pressure) control Iodpfx Aljx N T Uyecjtg - Automatic lubrication system - Electronically controlled filter contamination warning - On-screen monitoring of hydraulic unit oil temperature and system status - Cooling system - Off-line filtration - Safety systems for operator protection - SIEMENS – SCHNEIDER switchgear components 📐 Technical Specifications – CHSP 100/40 - Type: Steel construction, 8-guideway H-frame body - Frame Material: St52 – ERDEMİR - Slide Bearing: Bronze Zr14 - Capacity (Ram): 100 Ton - Capacity (Cushion): 40 Ton - Movable Table Size: 1000 × 1200 mm - Fixed Table Size: 1000 × 1200 mm - Parallelism Tolerance: 120 micron/meter - Perpendicularity Tolerance: 60 micron/meter - Ram Stroke: 600 mm - Cushion Stroke: 200 mm - Min. Daylight: 100 mm - Max. Daylight: 700 mm - Stress Relief: Vibration stress relief - Welding Application: WPQR and WPS certified by TÜRK-AK EN ISO 15614-1:2017 (supervised by welding coordinators certified according to EN ISO 14731) - Max. Working Pressure: 250 Bar - Total Motor Power: 11 kW – IE3 - Main Pump: 22 cm³ – REXROTH or PARKER - Movable Table Rapid Down Speed: 150 mm/sec - Movable Table Drawing Speed: 12 mm/sec - Movable Table Return Speed: 170 mm/sec - Cushion Forward Speed: 30 mm/sec - Main Cylinder Inner Diameter: Ø230 mm – Ck45 - Cushion Cylinder Inner Diameter: Ø140 mm – Ck45 - Auxiliary Acceleration Cylinders: 2 units - Approx. Height of Press: 3400 mm - Approx. Width of Press: 2950 mm - Approx. Depth of Press: 2000 mm - Lower Table Height from Floor: 1250 mm - Pre-Fill Valve: NG 100 - Hydraulic Unit: REXROTH or PARKER - Cooling System: EMMEGI – CIESSE – PARKER - Off-line Filtration: REXROTH or PARKER - Linear Position Transducer: NOVATECHNIK or TURCK - PLC Application: DELTA - Touch Screen Panel: DELTA 7” - Switchgear Components: SIEMENS – SCHNEIDER - Approximate Weight: 9 Ton Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Kondisi: baru, Tahun pembuatan: 2025, gaya penekanan: 400 t, panjang langkah: 1.000 mm, lebar meja: 1.200 mm, panjang meja: 1.500 mm, gaya penarikan balik: 150 t, tekanan kerja: 250 batang, Perlengkapan: dokumentasi / manual, penghadang cahaya keselamatan, CRONOSSTECH CHSP 400/150 H-Type Hydraulic Deep Drawing (Flanging) Press – 8 Guide Rails General Description The CRONOSSTECH CHSP series H-type hydraulic deep drawing presses are developed with a double-acting working principle to ensure controlled material flow for sheet forming, deep drawing, and flanging applications. Thanks to its 8-slider H-frame design, maximum rigidity is ensured during the pressing operation; parallelism and perpendicularity tolerances are consistently maintained throughout the long stroke. The CHSP 400/150 model, with a 400-ton main ram and a 150-ton cushion ram (blankholder), is designed for deep drawing and flanging applications requiring high tonnage. The frame construction is stress-relieved by vibration to ensure long-lasting and reliable operation. ⚙️ Standard Equipment - Steel construction, 8-guide H-frame press body - Stress-relieved frame by vibration - Bronze Zr14 slide bearings - Fully certified welding applications with TÜRK-AK accredited WPQR and WPS approvals (EN ISO 15614-1:2017 / EN ISO 14731) - Design and manufacturing in compliance with CE standards - PLC-controlled hydraulic system - 7” DELTA touchscreen panel - Adjustable stroke control for ram and cushion - Adjustable ram and cushion tonnage (pressure) control Itjdox N Uhhspfx Alcog - Automatic lubrication system - Electronic filter contamination warning system - Display of hydraulic unit oil temperature and system status on screen - Cooling system - Off-line filtration - Safety systems to ensure operator protection - SIEMENS – SCHNEIDER electrical components 📐 Technical Specifications – CHSP 400/150 - Type: Steel construction, 8-guide H-frame press body - Frame Material: St52 – ERDEMİR - Slide Bearings: Bronze Zr14 - Capacity (Ram): 400 Ton - Capacity (Cushion/Blankholder): 150 Ton - Moving Table Size: 1200 × 1500 mm - Fixed Table Size: 1200 × 1500 mm - Parallelism Tolerance: 120 micron/m - Perpendicularity Tolerance: 60 micron/m - Stroke (Ram): 1000 mm - Stroke (Cushion): 350 mm - Min. daylight: 100 mm - Max. daylight: 1100 mm - Stress relief: Vibratory stress relieving - Welding application: WPQR and WPS approved by TÜRK-AK, EN ISO 15614-1:2017 (Welding procedures are supervised by ‘welding coordination engineers’ certified as per EN ISO 14731) - Max. Working Pressure: 250 Bar - Total Motor Power: 37 kW – IE3 - Main Pump: 45 cm³ – REXROTH or PARKER - Moving Table Fast Down Speed: 150 mm/sec - Moving Table Drawing Speed: 12 mm/sec - Moving Table Return Speed: 170 mm/sec - Cushion Table Forward Speed: 30 mm/sec - Main Cylinder Bore: Ø450 mm – Ck45 - Cushion Cylinder Bore: Ø280 mm – Ck45 - Auxiliary Acceleration Cylinders: 2 units - Approximate Press Height: 5600 mm - Approximate Press Width: 3250 mm - Approximate Press Depth: 2200 mm - Die Height from Floor: 1400 mm - Pre-fill Valve: NG 150 - Hydraulic Unit: REXROTH or PARKER - Cooling System: EMMEGI – CIESSE – PARKER - Off-line Filtration: REXROTH or PARKER - Linear Measurement Scale: NOVATECHNIK or TURCK - PLC: DELTA - Touchscreen Panel: DELTA 7” - Electrical Components: SIEMENS – SCHNEIDER - Approximate Weight: 24 Tons Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Kondisi: baru, Tahun pembuatan: 2025, gaya penekanan: 100 t, panjang langkah: 500 mm, lebar meja: 800 mm, panjang meja: 1.000 mm, tekanan kerja: 250 batang, Perlengkapan: dokumentasi / manual, penghadang cahaya keselamatan, CRONOSSTECH CHP 100 H-Frame Single-Acting Hydraulic Press – 8-Guide General Description The CRONOSSTECH CHP series H-frame single-acting hydraulic presses are industrial machines designed for sheet metal forming, straightening, assembly, and die pressing applications, featuring a robust steel construction. The 8-guide H-frame structure ensures high stability and repeatable precision during pressing operations. CHP Series – Structural Features CHP series presses are engineered for heavy-duty use. The frame and supporting components are stress-relieved via vibration methods. The slide bearings use bronze Zr14 material, providing long-lasting and stable operation. Key Advantages - 8-guide H-frame structure - Stress-relieved steel construction via vibration - Welding procedures compliant with ISO standards - PLC control with touchscreen operation - Design focused on operator safety and process stability ⚙️ Standard Equipment - Steel construction, 8-guide H-type press frame - Stress-relieved frame and support parts by vibration - Bronze Zr14 slide bearings - WPQR & WPS certified welding procedures with TÜRK-AK accreditation (EN ISO 15614-1:2017 / EN ISO 14731) - Machine structure designed and manufactured in accordance with CE standards - PLC-controlled hydraulic system - 7” DELTA touchscreen panel - Adjustable ram stroke and tonnage control - Automatic lubrication system - Electronic filter contamination warning - Monitoring of hydraulic unit oil temperature and system status via display - Cooling system and off-line filtration - Dual-hand operator control system - Light curtain safety barrier (standard for operator safety) - SIEMENS – SCHNEIDER switchgear components 📐 Technical Specifications – CHP 100 Type: Steel construction, 8-guide H-frame press body Frame Material: St52 – ERDEMİR Slide Bearing: Bronze Zr14 Capacity (Ram): 100 Ton Movable Table Size: 800 × 1000 mm Fixed Table Size: 800 × 1000 mm Parallelism Tolerance: 120 micron/m Perpendicularity Tolerance: 60 micron/m Stroke (Ram): 500 mm Min. Daylight Opening: 100 mm Max. Daylight Opening: 600 mm Stress Relief: Vibratory stress relief Welding: EN ISO 15614-1/2017 certified by TÜRK-AK accreditation with WPQR and WPS approval (Supervised by certified welding coordination engineers according to EN ISO 14731) Max. Working Pressure: 250 Bar Total Motor Power: 11 kW – IE3 Main Pump: 22 cm³ – REXROTH or PARKER Movable Table Fast Descent Speed: 150 mm/s Movable Table Pressing Speed: 12 mm/s Movable Table Return Speed: 170 mm/s Main Cylinder Bore: Ø230 mm – Ck45 Auxiliary Acceleration Cylinders: 2 pcs Approx. Press Height: 3400 mm Itedpjx N Tx Sjfx Alcjg Approx. Press Width: 2950 mm Approx. Press Depth: 2000 mm Lower Table Height Above Floor: 1250 mm Pre-fill Valve: NG 100 Hydraulic Power Unit: REXROTH or PARKER Cooling System: EMMEGI – CIESSE – PARKER Off-line Filtration: REXROTH or PARKER Linear Position Sensor: NOVATECHNIK or TURCK PLC: DELTA Touchscreen Panel: DELTA 7” Electrical Components: SIEMENS – SCHNEIDER Approximate Weight: 6.5 Ton Production Note This machine is manufactured in Turkey by CRONOSSTECH.

Kondisi: baru, Tahun pembuatan: 2025, gaya penekanan: 200 t, panjang langkah: 600 mm, lebar meja: 800 mm, panjang meja: 1.000 mm, tekanan kerja: 250 batang, Perlengkapan: dokumentasi / manual, penghadang cahaya keselamatan, CRONOSSTECH CHP 200 H-Type Single-Acting Hydraulic Press – 8-Guided Slides General Description The CRONOSSTECH CHP series H-type single-acting hydraulic presses are high-rigidity industrial press solutions designed for sheet metal forming, straightening, assembly, and die pressing applications. Thanks to their 8-guide H-frame body, loads generated during pressing are evenly distributed, ensuring stable and repeatable operation. The CHP 200 model is engineered for applications requiring medium to high tonnage, with a focus on reliable performance and long service life. CHP Series – Structural Features CHP series presses are designed for heavy-duty industrial use. The frame and carrier components are stress-relieved by vibration. Bronze Zr14 slide bushings ensure smooth ram movement and long-term precision stability. ⚙️ Standard Equipment - Steel construction, 8-guide H-type press body - Stress-relieved body and carrier parts via vibration - Bronze Zr14 slide bushings - WPQR & WPS certified welding with TÜRK-AK accreditation (EN ISO 15614-1:2017 / EN ISO 14731) - Machine structure designed and manufactured in compliance with CE standards - PLC-controlled hydraulic system - Touchscreen panel (DELTA 7”) - Adjustable ram stroke and tonnage control - Automatic lubrication system - Electronically-controlled filter contamination warning - Monitoring of hydraulic unit oil temperature and system status via screen - Cooling system - Off-line filtration - Two-hand control system - Light curtain (standard for operator safety) - SIEMENS and SCHNEIDER electrical components 📐 Technical Specifications – CHP 200 Type: Steel construction, 8-guide H-frame press body Frame Material: St52 – ERDEMİR Slide Bushings: Bronze Zr14 Capacity (Ram): 200 Tons Movable Table Dimensions: 800 × 1000 mm Fixed Table Dimensions: 800 × 1000 mm Parallelism Tolerance: 120 micron/m Perpendicularity Tolerance: 60 micron/m Ram Stroke: 600 mm Min. Daylight: 100 mm Max. Daylight: 700 mm Itsdpex N T D Ujfx Alcog Stress Relief: Vibration Welding Application: TÜRK-AK WPQR and WPS certified welding (with EN ISO 15614-1/2017 welding application certificate, supervised by certified welding coordinators according to EN ISO 14731) Max. Working Pressure: 250 Bar Total Motor Power: 22 kW – IE3 Main Pump: 32 cm³ – REXROTH or PARKER Movable Table Rapid Down Speed: 150 mm/sec Movable Table Pressing Speed: 12 mm/sec Movable Table Return Speed: 170 mm/sec Main Cylinder Bore: Ø320 mm – Ck45 Auxiliary Acceleration Cylinders: 2 pcs Approx. Press Height: 3800 mm Approx. Press Width: 2950 mm Approx. Press Depth: 2200 mm Lower Table Height from Floor: 1350 mm Pre-fill Valve: NG 125 Hydraulic Unit: REXROTH or PARKER Cooling System: EMMEGI – CIESSE – PARKER Off-line Filtration: REXROTH or PARKER Linear Position Transducer: NOVATECHNIK or TURCK PLC: DELTA Touchscreen Panel: DELTA 7” Electrical Components: SIEMENS – SCHNEIDER Approx. Weight: 8 Tons Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Kondisi: baru, Tahun pembuatan: 2025, gaya penekanan: 60 t, panjang langkah: 400 mm, lebar meja: 700 mm, panjang meja: 700 mm, jarak antara tiang: 700 mm, gaya penarikan balik: 20 t, tekanan kerja: 250 batang, Perlengkapan: dokumentasi / manual, penghadang cahaya keselamatan, CRONOSSTECH 60/20 TON COLUMN-TYPE HYDRAULIC SPINNING PRESS Itjdex N Ulgepfx Alcog General Description The CRONOSSTECH 60/20 ton column-type hydraulic spinning press is a rigid and compact press solution designed for precision metal forming, deep drawing, and spinning applications. Its four-column construction ensures stable maintenance of parallelism and perpendicularity tolerances throughout the pressing operation. The frame, manufactured from St52 grade steel, undergoes stress relief by vibration. Ram and pot systems can be controlled independently; stroke and pressure settings are precisely configured via the touchscreen panel. Equipped with REXROTH or PARKER hydraulic components, IE3 class motor, and an automatic lubrication system, this press ensures long service life, safety, and efficient operation. PLC-controlled architecture minimizes operator errors. This model provides an ideal solution for small and medium-scale spinning, deep drawing, die testing, and auxiliary pressing applications. Key Advantages - Rigid, four-column press frame construction - Independent stroke and tonnage control for ram and pot - Settings adjustable via touchscreen panel - High precision and repeatability - Low maintenance requirements, long service life Fields of Application - Metal spinning operations - Deep drawing processes - Die testing and prototype production - Metal processing and auxiliary production lines ⚙️ STANDARD AND TECHNICAL SPECIFICATIONS TYPE: Four-column FRAME MATERIAL: St52 – ERDEMİR COLUMN SHAFT DIAMETER: Ø 90 mm – 4 pcs, induction-hardened, hard chrome-plated shafts SLIDE BEARING: Bronze Zr14 RAM CAPACITY: 60 ton POT CAPACITY: 20 ton DISTANCE BETWEEN COLUMNS: 700 × 700 mm PARALLELISM TOLERANCE: 120 micron/m PERPENDICULARITY TOLERANCE: 60 micron/m RAM STROKE: 400 mm POT STROKE: 100 mm MIN. CLEAR OPENING: 100 mm MAX. CLEAR OPENING: 500 mm WELD STRESS RELIEF: Vibratory stress relief WELD APPLICATION: WPQR and WPS certified by TÜRK-AK, EN ISO 15614-1:2017 (EN ISO 14731) MAX. WORKING PRESSURE: 250 bar TOTAL MOTOR POWER: 7.5 kW – IE3 MAIN PUMP: 22 cm³ – REXROTH or PARKER MOVABLE TABLE FAST DESCENT SPEED: 150 mm/sec MOVABLE TABLE SPINNING SPEED: 12 mm/sec MOVABLE TABLE RETURN SPEED: 170 mm/sec POT TABLE FORWARD SPEED: 30 mm/sec MAIN CYLINDER BORE: Ø 175 mm – Ck45 POT CYLINDER BORE: Ø 100 mm – Ck45 AUXILIARY BOOST CYLINDERS: 2 pcs APPROX. PRESS HEIGHT: 3100 mm APPROX. PRESS WIDTH: 1050 mm APPROX. PRESS DEPTH: 1050 mm DISTANCE FROM FLOOR TO LOWER TABLE: 1000 mm MAIN CHARGING VALVE: NG 100 HYDRAULIC UNIT: REXROTH or PARKER COOLING SYSTEM: EMMEGI – CIESSE – PARKER OFF-LINE FILTRATION: REXROTH or PARKER LUBRICATION TYPE: Automatic (adjustable via panel) RAM / POT STROKE & TONNAGE ADJUSTMENT: Adjustable via panel SYSTEM & PRESS STATUS INFORMATION: Viewable on screen DIE MEMORY: Adjustable via screen LINEAR POSITION SENSOR: NOVATECHNIK or TURCK PLC: DELTA TOUCHSCREEN PANEL: DELTA 7” CONTROL COMPONENTS: SIEMENS – SCHNEIDER APPROX. WEIGHT: 5 ton Note on Production This machine is manufactured by CRONOSSTECH in Turkey.

Kondisi: baru, Tahun pembuatan: 2025, gaya penekanan: 80 t, panjang langkah: 500 mm, lebar meja: 700 mm, panjang meja: 700 mm, jarak antara tiang: 700 mm, gaya penarikan balik: 30 t, tekanan kerja: 250 batang, Perlengkapan: dokumentasi / manual, penghadang cahaya keselamatan, CRONOSSTECH 80/30 TON COLUMN TYPE HYDRAULIC DEEP DRAWING PRESS General Description The CRONOSSTECH 80/30 ton column type hydraulic deep drawing press is an industrial press solution with a four-column rigid frame, specifically engineered for high-precision metal deep drawing, forming, and die testing applications. Its St52 grade steel construction is stress-relieved by vibration technique, ensuring high parallelism and perpendicularity tolerances are maintained during pressing operations. The ram and cushion systems operate independently, with precise stroke and pressure adjustments available via the operator panel. Featuring hydraulic components from REXROTH or PARKER, an IE3 class motor, and PLC control, this model ensures long service life, safety, and energy-efficient operation. Automatic lubrication and contamination alerts for filters minimize maintenance requirements. This machine is ideal for small to medium series production, die testing, and precision forming tasks. Key Advantages - Four-column rigid press frame design - Independent stroke and tonnage adjustments for ram and cushion - Full control via touchscreen panel - High repeatability and accuracy - Low maintenance costs, long service life Areas of Application - Metal deep drawing applications - Deep drawing processes - Die testing and prototype production - Auxiliary pressing operations ⚙️ STANDARD AND TECHNICAL SPECIFICATIONS TYPE: Four-column FRAME MATERIAL: St52 – ERDEMIR COLUMN SHAFT DIAMETER: Ø 90 mm – 4 pcs, induction hardened and chrome plated SLIDE BEARING: Bronze Zr14 CAPACITY (RAM): 80 tons CAPACITY (CUSHION): 30 tons DISTANCE BETWEEN COLUMNS: 700 × 700 mm PARALLELISM TOLERANCE: 120 microns/m PERPENDICULARITY TOLERANCE: 60 microns/m STROKE (RAM): 500 mm STROKE (CUSHION): 150 mm MIN. DAYLIGHT: 100 mm MAX. DAYLIGHT: 600 mm WELDING STRESS RELIEF: Vibration stress relief WELDING PROCESS: TÜRK-AK accredited WPQR & WPS – EN ISO 15614-1:2017 (EN ISO 14731) MAX. OPERATING PRESSURE: 250 bar TOTAL MOTOR POWER: 11 kW – IE3 MAIN PUMP: 22 cm³ – REXROTH or PARKER MOVING TABLE FAST DESCENT SPEED: 150 mm/s MOVING TABLE DRAWING SPEED: 12 mm/s MOVING TABLE RETURN SPEED: 170 mm/s CUSHION FORWARD SPEED: 30 mm/s MAIN CYLINDER BORE: Ø 200 mm – Ck45 CUSHION CYLINDER BORE: Ø 125 mm – Ck45 AUXILIARY ACCELERATION CYLINDERS: 2 pcs APPROXIMATE MACHINE HEIGHT: 3300 mm APPROXIMATE MACHINE WIDTH: 1050 mm APPROXIMATE MACHINE DEPTH: 1050 mm BED HEIGHT FROM GROUND: 1100 mm PRE-FILL VALVE: NG 100 HYDRAULIC POWER UNIT: REXROTH or PARKER COOLING SYSTEM: EMMEGI – CIESSE – PARKER OFF-LINE FILTRATION: REXROTH or PARKER LUBRICATION SYSTEM: Automatic (adjustable via touch panel) RAM / CUSHION STROKE & TONNAGE SETTING: Adjustable via touch panel SYSTEM & PRESS STATUS INFORMATION: Viewable via touch screen DIE MEMORY: Adjustable via touch panel LINEAR SCALE: NOVATECHNIK or TURCK PLC: DELTA TOUCH PANEL: DELTA 7” SWITCHGEAR: SIEMENS – SCHNEIDER APPROXIMATE WEIGHT: 5.5 tons Itsdpfx Ajx N Ultslceg

Kondisi: baru, Tahun pembuatan: 2025, gaya penekanan: 150 t, panjang langkah: 500 mm, lebar meja: 800 mm, panjang meja: 1.000 mm, tekanan kerja: 250 batang, Perlengkapan: dokumentasi / manual, penghadang cahaya keselamatan, CRONOSSTECH CHP 150 Iedpsx N T Dzsfx Alcotg H-Frame Single-Acting Hydraulic Press – 8-Guided Slides General Description The CRONOSSTECH CHP series H-frame single-acting hydraulic presses are industrial presses with a rigid steel construction, designed for sheet metal forming, straightening, assembly, and die pressing applications. The H-frame structure with 8 guiding slides ensures stable, balanced, and repeatable operation during pressing. The CHP 150 model has been developed to deliver reliable performance and long-term use for medium tonnage applications. CHP Series – Structural Features CHP series presses are engineered with consideration for heavy-duty usage. The frame and supporting parts are stress-relieved through vibration. Bronze Zr14 guide bushings provide smooth load transfer and long-term stability. ⚙️ Standard Equipment • Steel construction, 8-slide guided H-frame press body • Stress-relieved frame and supporting parts by vibration • Bronze Zr14 guide bushings • TÜRK-AK accredited WPQR & WPS certified welding applications (EN ISO 15614-1:2017 / EN ISO 14731) • Machine design and production in compliance with CE standards • PLC-controlled hydraulic system • Touch panel display (DELTA 7”) • Adjustable ram stroke and tonnage control • Automatic lubrication system • Electronically monitored filter contamination warning • On-screen monitoring of hydraulic unit oil temperature and system status • Cooling system • Off-line filtration • Two-hand control system • Light barrier (operator safety as standard) • SIEMENS – SCHNEIDER switchgear components 📐 Technical Specifications – CHP 150 Type: Steel construction, 8-slide guided H-frame press body Frame Material: St52 – ERDEMİR Guide Bearings: Bronze Zr14 Capacity (Ram): 150 Tons Moving Table Dimensions: 800 × 1000 mm Fixed Table Dimensions: 800 × 1000 mm Parallelism Tolerance: 120 micron/meter Perpendicularity Tolerance: 60 micron/meter Stroke (Ram): 500 mm Min. Daylight: 100 mm Max. Daylight: 600 mm Stress Relieving: Vibration stress relieving Welding Application: WPQR and WPS certified welding accredited by TÜRK-AK, in compliance with EN ISO 15614-1/2017, supervised by certified welding coordination engineers as per EN ISO 14731 Max. Working Pressure: 250 Bar Total Motor Power: 18.5 kW – IE3 Main Pump: 32 cm³ – REXROTH or PARKER Moving Table Fast Down Speed: 150 mm/sec Moving Table Pressing Speed: 12 mm/sec Moving Table Return Speed: 170 mm/sec Main Cylinder Internal Diameter: Ø280 mm – Ck45 Approx. Press Height: 3650 mm Approx. Press Width: 2950 mm Approx. Press Depth: 2000 mm Lower Table Height from Floor: 1250 mm Pre-fill Valve: NG 100 Hydraulic Power Unit: REXROTH or PARKER Cooling System: EMMEGI – CIESSE – PARKER Off-line Filtration: REXROTH or PARKER Linear Position Sensor: NOVATECHNIK or TURCK PLC Application: DELTA Touch Panel Display: DELTA 7” Switchgear Components: SIEMENS – SCHNEIDER Approximate Weight: 7 Tons Production Note This machine is manufactured in Turkey by CRONOSSTECH.

Kondisi: baru, Tahun pembuatan: 2025, gaya penekanan: 400 t, panjang langkah: 800 mm, lebar meja: 1.200 mm, panjang meja: 1.500 mm, tekanan kerja: 250 batang, Perlengkapan: dokumentasi / manual, penghadang cahaya keselamatan, CRONOSSTECH CHP 400 H-Type Single-Acting Hydraulic Press – 8-Guided General Description The CRONOSSTECH CHP series H-type single-acting hydraulic presses are robust industrial solutions designed for sheet metal forming, straightening, assembly, and die press applications. The 8-guided H-frame construction ensures even distribution of high loads during pressing, delivering stable and repeatable performance. The CHP 400 model is engineered to provide durable and reliable operation for heavy-duty applications requiring high tonnage. CHP Series – Structural Features CHP series presses are designed for demanding industrial use. The frame and supporting components are stress-relieved via vibration. Bronze Zr14 guide bushings allow for smooth load distribution during ram movement, contributing to long-term repeatability and precision. ⚙️ Standard Equipment - Steel construction, 8-guided H-frame press body - Stress-relieved frame and carrier parts via vibration - Bronze Zr14 guide bushings - WPQR & WPS welding procedures approved by TÜRK-AK-accredited bodies (EN ISO 15614-1:2017 / EN ISO 14731) - Machine structure designed and built in compliance with CE standards - PLC-controlled hydraulic system - 7” DELTA touchscreen panel - Adjustable ram stroke and tonnage control - Automatic lubrication system - Electronically monitored filter contamination warning - On-screen monitoring of hydraulic oil temperature and system status - Cooling system - Off-line filtration unit - Two-hand operation control - Light curtain (operator safety – standard) - SIEMENS – SCHNEIDER switchgear components 📐 Technical Specifications – CHP 400 Type: Steel construction, 8-guided H-frame press body Frame Material: St52 – ERDEMİR Guide Bushings: Bronze Zr14 Ram Capacity: 400 Tons Moving Table Dimensions: 1200 × 1500 mm Fixed Table Dimensions: 1200 × 1500 mm Parallelism Tolerance: 120 micron/meter Perpendicularity Tolerance: 60 micron/meter Ram Stroke: 800 mm Min. Daylight: 100 mm Max. Daylight: 900 mm Stress Relief: Vibration stress relief Welding Qualification: EN ISO 15614-1/2017, WPQR & WPS approved/certified by TÜRK-AK, supervised by certified welding coordinators (EN ISO 14731) Max. Working Pressure: 250 Bar Total Motor Power: 37 kW – IE3 Main Pump: 45 cm³ – REXROTH or PARKER Fast Descent Speed of Moving Table: 150 mm/s Pressing Speed of Moving Table: 12 mm/s Return Speed of Moving Table: 170 mm/s Main Cylinder Internal Diameter: Ø450 mm – Ck45 Auxiliary Acceleration Cylinders: 2 units Approximate Machine Height: 5600 mm Approximate Machine Width: 3250 mm Approximate Machine Depth: 2200 mm Lower Table Height from Ground: 1400 mm Pre-Fill Valve: NG 150 Hydraulic Unit: REXROTH or PARKER Cooling System: EMMEGI – CIESSE – PARKER Itodpjx N T Hpsfx Alceg Off-line Filtration: REXROTH or PARKER Linear Position Encoder: NOVATECHNIK or TURCK PLC Application: DELTA Touchscreen Panel: DELTA 7” Switchgear: SIEMENS – SCHNEIDER Approximate Weight: 19.5 Tons Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Kondisi: baru, Tahun pembuatan: 2025, gaya penekanan: 800 t, panjang langkah: 800 mm, lebar meja: 1.500 mm, panjang meja: 2.000 mm, tekanan kerja: 250 batang, Perlengkapan: dokumentasi / manual, penghadang cahaya keselamatan, CRONOSSTECH CHP 800 H-Type Single-Acting Hydraulic Press – 8-Guided General Description The CRONOSSTECH CHP series H-type single-acting hydraulic presses are designed for heavy-duty sheet metal forming, straightening, assembly, and high-tonnage pressing applications. The 8-guide H-frame structure ensures balanced distribution of high forces during pressing, providing maximum rigidity and long service life. The CHP 800 model has been developed to deliver reliable and stable performance for high-capacity production lines. CHP Series – Structural Features CHP series presses are engineered with consideration for heavy industrial conditions. The frame and main structural components are stress-relieved using vibratory methods. Bronze Zr14 guide bearings ensure even load distribution and precision operation throughout the ram movement. ⚙️ Standard Equipment - Steel construction, 8-guide H-frame press body - Stress-relieved frame via vibration - Bronze Zr14 guide bearings - WPQR & WPS approved welding in accordance with TÜRK-AK certified procedures (EN ISO 15614-1:2017 / EN ISO 14731) - Design and manufacturing in compliance with CE standards - PLC-controlled hydraulic system - 7” DELTA touchscreen panel - Adjustable ram stroke and tonnage control - Automatic lubrication system - Electronically monitored filter contamination warning - Real-time monitoring of hydraulic unit oil temperature and system status on screen - Cooling system - Off-line filtration - Two-hand control system - Light curtain (operator safety standard) - SIEMENS – SCHNEIDER switching components 📐 Technical Specifications – CHP 800 Type: Steel construction, 8-guide H-frame press body Frame Material: St52 – ERDEMİR Guide Bearings: Bronze Zr14 Capacity (Ram): 800 Tons Moving Table Size: 1500 × 2000 mm Fixed Table Size: 1500 × 2000 mm Parallelism Tolerance: 120 microns/m Perpendicularity Tolerance: 60 microns/m Stroke (Ram): 800 mm Min. Daylight: 100 mm Max. Daylight: 900 mm Stress Relief: Vibratory stress relieving Welding Method: EN ISO 15614-1/2017 welding application certificate (approved by TÜRK-AK WPQR and WPS), supervised by certified welding coordination engineers per EN ISO 14731 Max. Operating Pressure: 250 Bar Total Motor Power: 75 kW – IE3 Main Pump: 70 cm³ – REXROTH or PARKER Moving Table Rapid Descent Speed: 150 mm/sec Moving Table Forming Speed: 12 mm/sec Moving Table Return Speed: 170 mm/sec Main Cylinder Inner Diameter: Ø390 mm – Ck45 (2 pcs) Auxiliary Acceleration Cylinders: 2 pcs Approx. Machine Height: 6000 mm Approx. Machine Width: 3350 mm Approx. Machine Depth: 2700 mm Table Height from Floor: 1450 mm Pre-fill Valve: NG 200 Hydraulic Unit: REXROTH or PARKER Cooling System: EMMEGI – CIESSE – PARKER Off-line Filtration: REXROTH or PARKER Linear Position Transducer: NOVATECHNIK or TURCK PLC: DELTA Touchscreen Panel: DELTA 7” Switchgear: SIEMENS – SCHNEIDER Approx. Weight: 45 Tons Production Note Isdpfxsx N T Nks Alcjtg This machine is manufactured by CRONOSSTECH in Turkey.

Kondisi: baru, Tahun pembuatan: 2025, gaya penekanan: 2.000 t, panjang langkah: 1.000 mm, lebar meja: 1.500 mm, panjang meja: 2.500 mm, tekanan kerja: 250 batang, Perlengkapan: dokumentasi / manual, penghadang cahaya keselamatan, CRONOSSTECH CHP 2000 H-Type Hydraulic Press – 8 Guideways General Description The CRONOSSTECH CHP series H-type hydraulic presses are designed for heavy-duty forming, deep drawing, spinning, and die applications that require very high tonnage. The 8-guideway H-frame structure provides maximum rigidity during pressing operations, maintaining parallelism and perpendicularity tolerances throughout the entire long stroke. The CHP 2000 model, with its large table dimensions, high-capacity hydraulic system, and robust motor, is a reliable and long-lasting solution for the automotive, defense, heavy industry, and high-tonnage production lines. The frame structure is stress-relieved by vibration to ensure stable operation. ⚙️ Standard Equipment - Welded steel construction, H-frame body with 8 guideways - Stress-relieved frame structure via vibration - Bronze Zr14 guide bushings - WPQR and WPS certified welding applications, accredited by TÜRK-AK (EN ISO 15614-1:2017 / EN ISO 14731) - Design and manufacturing in compliance with CE standards - PLC controlled hydraulic system - 7” DELTA touchscreen panel - Adjustable ram stroke and tonnage control - Automatic lubrication system - Electronic filter contamination monitoring - Hydraulic power unit oil temperature and system status monitoring on display - Cooling system - Off-line filtration - Safety systems for operator protection - SIEMENS – SCHNEIDER electrical components 📐 Technical Specifications – CHP 2000 - Type: Welded steel construction, H-frame body with 8 guideways - Frame Material: St52 – ERDEMİR - Guideway Bushings: Bronze Zr14 - Capacity (Ram): 2000 Tons - Moving Table Size: 1500 × 2500 mm Ijdox N T Srjpfx Alcotg - Fixed Table Size: 1500 × 2500 mm - Parallelism Tolerance: 120 micron/meter - Perpendicularity Tolerance: 60 micron/meter - Stroke (Ram): 1000 mm - Min. Daylight: 200 mm - Max. Daylight: 1200 mm - Stress Relief: Vibratory stress relief - Welding Application: WPQR and WPS certified, accredited by TÜRK-AK, EN ISO 15614-1:2017 - Max. Operating Pressure: 250 Bar - Total Motor Power: 180 kW – IE3 - Main Pump: 140 cm³ – REXROTH or PARKER - Moving Table Rapid Down Speed: 150 mm/sec - Moving Table Drawing Speed: 12 mm/sec - Moving Table Return Speed: 170 mm/sec - Main Cylinder Bore: Ø720 mm – Ck45 (2 units) - Auxiliary Speed-Up Cylinders: 2 units - Approx. Height: 6300 mm - Approx. Width: 3850 mm - Approx. Depth: 2500 mm - Table Height from Floor: 1500 mm - Pre-fill Valve: NG 200 - Hydraulic Power Unit: REXROTH or PARKER - Cooling System: EMMEGI – CIESSE – PARKER - Off-line Filtration: REXROTH or PARKER - Linear Position Transducer: NOVATECHNIK or TURCK - PLC System: DELTA - Touchscreen Panel: DELTA 7” - Electrical Components: SIEMENS – SCHNEIDER - Approximate Weight: 95 Tons Production Note This machine is manufactured in Turkey by CRONOSSTECH.

Kondisi: baru, Tahun pembuatan: 2025, gaya penekanan: 150 t, panjang langkah: 600 mm, lebar meja: 1.000 mm, panjang meja: 1.200 mm, gaya penarikan balik: 50 t, tekanan kerja: 250 batang, Perlengkapan: dokumentasi / manual, penghadang cahaya keselamatan, CRONOSSTECH CHSP 150/50 H-Type Hydraulic Deep Drawing (Forming) Press – 8-Guided General Description The CRONOSSTECH CHSP series H-type hydraulic deep drawing presses are developed with a double-acting operating principle to ensure controlled material flow during sheet metal forming, deep drawing, and forming applications. The 8-guided H-frame body construction provides maximum rigidity throughout the pressing process; parallelism and perpendicularity tolerances are consistently maintained throughout the stroke. The CHSP 150/50 model, with a 150-ton main ram and a 50-ton lower cushion (pot) capacity, is designed for precise and repeatable deep drawing applications. The frame construction is stress-relieved by vibration to ensure long-lasting and reliable operation. ⚙️ Standard Equipment - Steel construction, 8-guided H-frame press body - Vibration stress-relieved body structure - Bronze Zr14 guide bushings - WPQR and WPS approved welding applications accredited by TÜRK-AK (EN ISO 15614-1:2017 / EN ISO 14731) - Design and manufacturing in compliance with CE standards - PLC-controlled hydraulic system - Touchscreen panel (DELTA 7”) - Adjustable ram and cushion stroke control - Adjustable ram and cushion tonnage (pressure) control - Automatic lubrication system - Electronic filter contamination warning - Real-time display of hydraulic unit oil temperature and system status - Cooling system - Off-line filtration - Safety systems for operator protection - SIEMENS – SCHNEIDER electrical components 📐 Technical Specifications – CHSP 150/50 Type: Steel construction, 8-guided H-frame press body Frame Material: St52 – ERDEMİR Guide Bushings: Bronze Zr14 Isdpfxox N T U Hj Alcetg Capacity (Ram): 150 Tons Capacity (Cushion): 50 Tons Movable Table Dimension: 1000 × 1200 mm Fixed Table Dimension: 1000 × 1200 mm Parallelism Tolerance: 120 micron/meter Perpendicularity Tolerance: 60 micron/meter Stroke (Ram): 600 mm Stroke (Cushion): 200 mm Min. Clearance: 100 mm Max. Clearance: 700 mm Stress Relief: Vibration stress-relief Welding Application: WPQR and WPS approved, accredited by TÜRK-AK EN ISO 15614-1/2017 (welding applications are supervised by “welding coordination engineers” certified according to EN ISO 14731) Max. Working Pressure: 250 Bar Total Motor Power: 18.5 kW – IE3 Main Pump: 32 cm³ – REXROTH or PARKER Movable Table Fast Descent Speed: 150 mm/sec Movable Table Forming Speed: 12 mm/sec Movable Table Return Speed: 170 mm/sec Cushion Table Forward Speed: 30 mm/sec Main Cylinder Inner Diameter: Ø280 mm – Ck45 Cushion Cylinder Inner Diameter: Ø160 mm – Ck45 Auxiliary Acceleration Cylinders: 2 units Approximate Press Height: 3,650 mm Approximate Press Width: 2,950 mm Approximate Press Depth: 2,000 mm Table Height from Floor: 1,250 mm Pre-fill Valve: NG 100 Hydraulic Unit: REXROTH or PARKER Cooling System: EMMEGI – CIESSE – PARKER Off-line Filtration: REXROTH or PARKER Linear Distance Scale: NOVATECHNIK or TURCK PLC System: DELTA Touchscreen Display: DELTA 7” Electrical Components: SIEMENS – SCHNEIDER Approximate Weight: 11 Tons Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Kondisi: baru, Tahun pembuatan: 2025, gaya penekanan: 300 t, panjang langkah: 800 mm, lebar meja: 1.200 mm, panjang meja: 1.500 mm, gaya penarikan balik: 100 t, tekanan kerja: 250 batang, Perlengkapan: dokumentasi / manual, penghadang cahaya keselamatan, CRONOSSTECH CHSP 300/100 H-Type Hydraulic Deep Drawing (Spinning) Press – 8 Guideways General Description The CRONOSSTECH CHSP series H-type hydraulic deep drawing presses are developed with a double-acting operational principle to ensure controlled material flow in sheet metal forming, deep drawing, and spinning applications. The H-frame structure with 8 guideways provides maximum rigidity during pressing; parallelism and perpendicularity tolerances are stably maintained throughout the entire stroke. The CHSP 300/100 model, with a 300-ton main ram and a 100-ton blankholder (pot) capacity, is designed for deep drawing and spinning operations requiring high tonnage. The frame construction is stress-relieved via vibration to ensure long-lasting and reliable operation. ⚙️ Standard Equipment - Steel construction, H-frame body with 8 guideways - Vibration stress-relieved frame - Bronze Zr14 guideway bearings - Welding applications approved by TÜRK-AK accredited WPQR and WPS (EN ISO 15614-1:2017 / EN ISO 14731) - Design and manufacturing in compliance with CE standards - PLC-controlled hydraulic system - 7” touch panel display (DELTA) - Adjustable ram and pot stroke control - Adjustable ram and pot tonnage (pressure) control - Automatic lubrication system Itedjx N Uhbepfx Alcog - Electronically monitored filter contamination warning - On-screen monitoring of hydraulic unit oil temperature and system status - Cooling system - Off-line filtration - Safety systems for operator protection - SIEMENS – SCHNEIDER electrical components 📐 Technical Specifications – CHSP 300/100 - Type: Steel construction, H-frame body with 8 guideways - Frame Material: St52 – ERDEMİR - Guideway Bearings: Bronze Zr14 - Capacity (Ram): 300 Tons - Capacity (Pot): 100 Tons - Moving Table Dimensions: 1200 × 1500 mm - Fixed Table Dimensions: 1200 × 1500 mm - Parallelism Tolerance: 120 micron/m - Perpendicularity Tolerance: 60 micron/m - Stroke (Ram): 800 mm - Stroke (Pot): 300 mm - Min. Daylight Opening: 100 mm - Max. Daylight Opening: 900 mm - Weld Stress Relief: Vibratory stress relieving - Welding Application: WPQR and WPS certified by TÜRK-AK (EN ISO 15614-1/2017; applications audited by certified "welding coordination engineers" in accordance with EN ISO 14731) - Max. Working Pressure: 250 Bar - Total Motor Power: 37 kW – IE3 - Main Pump: 45 cm³ – REXROTH or PARKER - Moving Table Fast Down Speed: 150 mm/s - Moving Table Drawing Speed: 12 mm/s - Moving Table Return Speed: 170 mm/s - Pot Table Forward Speed: 30 mm/s - Main Cylinder Bore: Ø390 mm – Ck45 - Pot Cylinder Bore: Ø230 mm – Ck45 - Auxiliary Acceleration Cylinders: 2 units - Approx. Press Height: 4400 mm - Approx. Press Width: 3250 mm - Approx. Press Depth: 2200 mm - Distance from Floor to Lower Table: 1350 mm - Pre-fill Valve: NG 150 - Hydraulic Power Unit: REXROTH or PARKER - Cooling System: EMMEGI – CIESSE – PARKER - Off-line Filtration: REXROTH or PARKER - Linear Position Transducer: NOVATECHNIK or TURCK - PLC System: DELTA - Touch Panel: DELTA 7” - Electrical Components: SIEMENS – SCHNEIDER - Approx. Weight: 21 Tons Production Note This machine is manufactured by CRONOSSTECH in Turkey.