Beli Uhlmann C130 bekas (54)
Urutkan hasil
- Harga terendah Harga tertinggi
- Iklan terbaru Iklan tertua
- Jarak terpendek Jarak maksimum
- Tahun pembuatan terbaru Tahun pembuatan tertua
- Pembaruan terbaru Pembaruan tertua
- Produsen dari A sampai Z Produsen dari Z ke A
- Relevansi
- Harga terendah
- harga
- Harga tertinggi
- harga
- Iklan terbaru
- Tanggal pengaturan
- Iklan tertua
- Tanggal pengaturan
- Jarak terpendek
- jarak
- Jarak maksimum
- jarak
- Tahun pembuatan terbaru
- tahun pembuatan
- Tahun pembuatan tertua
- tahun pembuatan
- Pembaruan terbaru
- pembaruan
- Pembaruan tertua
- pembaruan
- Produsen dari A sampai Z
- pabrikan
- Produsen dari Z ke A
- pabrikan
- Penamaan dari A ke Z
- Penunjukan
- Penamaan dari Z ke A
- Penunjukan
- Model dari A hingga Z
- Model
- Model dari Z ke A
- Model
- Referensi terendah
- referensi
- Referensi tertinggi
- referensi
- Waktu operasional terpendek
- Waktu operasional
- Waktu operasional terpanjang
- Waktu operasional
- relevansi
- relevansi
Iklan kecil
Hüttisheim
11.115 km
Mesin pengemas kardus
UhlmannC130 Ampullen - Blister
Hubungi
Kondisi: diremajakan ulang (bekas), Fungsionalitas: berfungsi sepenuhnya, Uhlmann C 130 Mesin Kartonase Horizontal untuk Ampul / Mesin Blister
- Pengemasan strip blister sepenuhnya otomatis dengan pemberian selebaran secara simultan
- Kapasitas maks. 120 siklus/menit, tergantung produk
Format:
P = 70 x 150 mm
L = 30 x 100 mm
T = 15 x 85 mm
Lhsdpfjyng Ddsx Alkof
Perangkat keras dan perangkat lunak baru, kontrol SPS Mitsubishi dan panel sentuh warna 8 inci
Garansi ketersediaan suku cadang selama 10 tahun
diremajakan secara mekanis
Aksesori opsional:
- Mesin lipat prospektus GUK, lipatan 4 kali
- Lem panas atau slot tutup lipat
- Pembacaan barcode pada kotak karton / selebaran
- Kontrol luminensi, kontrol kehadiran selebaran di dalam karton
- Stasiun emboss
- Pre-feeder prospektus
- Pompa vakum / Venturi
Iklan kecil
Laupheim
11.121 km
Mesin karton
UhlmannC130
Hubungi
Tahun pembuatan: 2005, jam operasional: 51.230 h, Kondisi: hampir baru (bekas), Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: C130 86/357,
Iklan kecil
Jerman
11.023 km
Cartoner
UhlmannC100
Hubungi
Kondisi: siap digunakan (bekas), Tahun pembuatan: 1989, de_to_hu_it_lt_001
Lhjdpfxsy Equae Alksf
Iklan kecil
Birkerød
10.808 km
Mesin penandaan dan serialisasi
UhlmannUSP
Hubungi
Kondisi: siap digunakan (bekas), Tahun pembuatan: 2018, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 1720266, Perlengkapan: Penandaan CE, en
Lhjdpfx Alsy D Nkyjkof
Iklan kecil
Jerman
11.023 km
Garis kaleng
IMA/Cremer/CBV/Deckert/UhlmannUN 800S/CF1220/Servo/AVM 738/Sensitive 350
Hubungi
Kondisi: siap digunakan (bekas), Tahun pembuatan: 2019, A complete can feeding, counting, and closing line including labeling and cartoning is available. 1) Can Feeder IMA Swiftpack UN 800S, year of manufacture: 2007, output: 60 cans/min, formats diameter/height: 45mm/51.5mm, 45mm/84mm, 45mm/96mm, 60mm/80mm, 60mm/122mm. 2) Counting Machine Cremer CF 1220, year of manufacture: 2002, counting capacity: 1,000 products/min, counting heads: 1, channels: 12, formats: capsules (HGK & WGK) and tablets (round & oblong), including one spare cylinder for flap storage. 3) 2x Rotary Tables Höflinger & Karg S1, table diameter: 1,000mm. 4) Capper (screw capper) CBV Servo, year of manufacture: 2019, closing capacity: 40 cycles/min, cap diameter range: 23mm-100mm. 5) Capper (crimper) Rudolf Deckert AVM 738, year of manufacture: 2003, closing capacity: 50 cans/min, can diameter: 45mm/60mm, cap formats diameter/height: 42.4mm/17.15mm, 50mm/12mm. 6) Can and Bottle Labeler IMA Sensitive 350, year of manufacture: 2009, labeling capacity: 350 pieces/min, can and bottle diameter range: 15mm-78mm, max. product height: 220mm, label length range: 15mm-220mm, label height range: 10mm-140mm, equipped with Allen Coding Set S-Compact 50/30 hot stamper and Keyence IV 500 CA camera. 7) Can and Bottle Cartoner Uhlmann C100, year of manufacture: 1988, cartoning capacity: 70 cans/min, max. can/bottle diameter and height: 60mm/120mm, folding box length range: 30mm-113mm, box width range: 15mm-85mm, box height range: 70mm-130mm. The machine was converted for cans and bottles in 2017 and equipped with a Mitsubishi D700-SC control system, including GUK Cartonac 91 folding device, 3x code readers, and luminescence inspection. 8) Coding and Inspection Unit Wipotec TQS-HC-A for serialization, tamper-evident, and weighing, year of manufacture: 2017, inspection capacity: 300 products/min, including 2x Herma 400 label dispensers, dual print head (2 cartridges), print inspection camera, weighing cell with weighing belt, and handheld scanner. 9) Banderoler (Shrink Banding Machine) Christ FilmTeq 3030, year of manufacture: 2011, infeed capacity: 50-200 folding boxes/min, outfeed capacity: 7-50 packs/min, folding box length range: 15mm-400mm, width range: 15mm-90mm, height range: 60mm-150mm, bundle length: 60mm-400mm, bundle width: 60mm-150mm, band height: 30mm-230mm. Documentation available. On-site inspection possible.
Ljdpfx Aowa Tixelkehf
Iklan kecil
Laupheim
11.121 km
Mesin karton Uhlmann C2205
UhlmannC2205
Hubungi
Kondisi: diremaj di bengkel (bekas), Fungsionalitas: berfungsi sepenuhnya, Continuous cartoner for blister packaging. Single-lane infeed, vacuum conveyor capacity 400 blisters/min.
Lhsdpfer Ny H Hjx Alkjf
GuK stack folding unit, maximum output 250 folded sheets/min.
Iklan kecil
Laupheim
11.121 km
Mesin thermoforming / mesin blister
UhlmannUPS4ET
Hubungi
Kondisi: seperti baru (mesin pameran), jam operasional: 50 h, Uhlmann Thermoforming Packaging System
UPS 4 ETX
For processing PVC forming film
and aluminum lidding foil
Base machine in modular technology and
balcony construction, with 12 modules:
- Forming film unwind unit
with 2 pneumatic expansion shafts
for core diameter 76 mm,
max. roll diameter 800 mm
- Cutting and splicing table for forming film
- Indexed forming film unwind
- 3-zone contact heating:
- 6 heating circuits, individually controllable
- simultaneous heating of
min. 3 index advances
- heating plates open automatically
when the machine stops
- Forming station with 4-column lift table guidance
- Filling section, length 1,360 mm
Lhedpotndpzofx Alkjf
- Safety cover on the filling section
Lidding foil unwind on the operator side
with pneumatic expansion shaft
for core diameter 76 mm,
max. roll diameter 300 mm
- Plate sealing station with 4-column
lift table guidance:
- integrated overload protection
- automatic lifting of the upper
sealing tool when the machine stops
- Free module for the integration of an additional
station
- Gripper chain indexing
- Punching station with blister lowering
- Waste cutter with integrated motorised
transport of the punching grid
- Smoothing station
- Perforation station ET/DT
- Compressed air supply monitoring
with machine stop when minimum value
is not reached
- Visio Scan
- electromagnetically locked safety doors
- Fast format change due to:
- plug-in format parts
- plug-in connections for cooling water supply
- Main drive with frequency-controlled three-phase
geared motor
- Control cabinet at the rear of the machine,
swivelling
Operator control system: Paccontrol
- 10.4" TFT color display with 640x480 pixel resolution
- 68C030 processor
- OS9 2.9 operating system
- 2 MB SRAM, 2 MB Flash, 16 MB DRAM
- SRAM card reader
- IBM standard membrane keyboard
- Centronics interface for external printer
- PS2 interface for external keyboard
- VGA interface for external monitor
- Serial interface for diagnostic purposes
- Arcnet interface
- 8 serial interfaces for connecting
devices
Integrated shift register ISR
Ejection of individual blister rows,
e.g., overheated film in the heating station,
products in the sealing station, etc.
Machine control:
Programmable logic sequence control
in modular design:
- B&R - PLC control
- Bus system with modules for CPU, inputs,
outputs, temperature controllers, cam switches, etc.
- External program memory
Technical Data UPS 4 ETX:
- Cycle rate:
- ET range: min./max.: 15/50 cycles/min.
Depending on film quality, feed
and format design
- Format range:
min./max. feed in filling section: 64/226 mm
min./max. film width: 100/300 mm
min./max. punching width: 28/284 mm
max. forming depth: 12 mm
- Compressed air:
- Inlet pressure: approx. 6 - 8 bar
4 Simtap feeders
Iklan kecil
Weiterstadt
11.177 km
Mesin ukiran
KuhlmannGm 1 /1
Hubungi
Tahun pembuatan: 1985, Kondisi: bekas, 1 used engraving machine
Manufacturer: KUHLMANN
Model: GM I-I
Working area: 320 x 200 x 280 mm
Template table: 500 x 400 mm
Work table: 500 x 200 mm
3D form engraving device
TGV rotary engraving device
Ljdpfxsk Tt Axs Alkohf
Various templates and type sets
Various engraving cutters
Speed range: 4,200 – 20,000 rpm
Dimensions (L x W x H): approx. 1.2 x 1 x 1.5 m
Weight: approx. 250 kg
Iklan kecil
Korschenbroich
11.288 km
Mesin ukir
Franz KuhlmannGravier Gel/1
Hubungi
Kondisi: bekas, Tahun pembuatan: 1969, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: Gel/1 02.0026, Mesin gravir bekas
Merek: Franz Kuhlmann
Lhsdpfx Aloyg Rv Uekjf
Nomor seri: Gml/1 / 02.0026
dengan aksesori
Iklan kecil
Burgoberbach
11.050 km
Mesin ukir mesin penggilingan salinan
Franz Kuhlmann KGGM 1/2
Hubungi
Kondisi: baik (bekas), Fungsionalitas: berfungsi sepenuhnya, For sale is a copying milling machine made by Franz Kuhlmann KG, model series GM ½.
The machine is fully functional and ready for immediate use.
Technical data:
X-axis (Longitudinal travel): 330 mm
Y-axis (Transversal travel): 200 mm
Z-axis (Vertical travel): 280 mm
Template table: 500 x 400 mm
Spindle speeds: 4,200 – 20,000 rpm
Spindle mount: Collet chuck bore up to 8 mm
Motor power: 0.5 kW
Dimensions: approx. 1145 x 1020 x 1620 mm (L x W x H)
Weight: 430 kg
Transport and loading can be organized across Europe at extra cost, if required.
Lhedpjwal Dhjfx Alkof
Prices are subject to VAT.
Inspection possible by appointment. Please contact us—our team will be glad to assist you.
Trade-in or exchange possible!
Machinery purchase / sale
PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE.
Are you in need of a high-quality yet affordable metalworking machine for your production? Or are you looking to sell your equipment?
For further information or contact options, please visit our website.
Iklan kecil
Jünkerath
11.307 km
Mesin dudukan kunci
STUHLMANNPOL 50
Hubungi
Kondisi: bekas, Tahun pembuatan: 1969, Berat 2 t
Angkat 500 mm
Ledewk Ravepfx Alkjhf
Hidrolik: ya
Tanpa aksesori: ya
Iklan kecil
Jerman
10.992 km
Dowel fúró- és beütőgép Ganner Index Logic
GannomatIndex Logic 130 Typ 471L130
Hubungi
Kondisi: bekas, Tahun pembuatan: 2014, Mesin bekas
Tahun pembuatan: 2014
Perlengkapan dan data teknis:
Area kerja X = 1300 mm
Area kerja Z = 80 mm
Jumlah unit terpisah: 2
Sumbu CNC: 2
Bor vertikal: 3
Bor horizontal y: 3
Motor: 1,5 kW
Dengan pemasukan pasak melalui pengumpan getar
Dengan sistem lem
Diameter pasak: 8 mm
Panjang pasak: 35 mm
Penempatan 4 bidang
Pengisian bergantian
Dengan penjepit pneumatik
Kontrol: Beckhoff
Ljdpfx Aljy E Awvskjhf
Ketersediaan: sesuai kesepakatan
Lokasi: 63934 Röllbach
Iklan kecil
Crailsheim
11.089 km
Derek
JMGMC 130S
Hubungi
Kondisi: bekas, panjang total: 4.630 mm, Tahun pembuatan: 2024, kapasitas angkut: 13.000 kg, - Drive: Front axle powered by two 8.5 kW 80V AC electric motors, insulation class H.
- Battery: 80V – 900 Ah with charge and battery level indicator. Working time up to 8 effective crane operating hours.
- Brakes: Automatic brake system acting on all wheels.
- Frame: Manufactured from solid sections and welded high-quality steel plates.
- Tyres: Front no. 4 superelastic 300x15” Rear no. 2 superelastic 200x15”
- Boom: Manufactured from solid sections and welded high-quality steel plates, composed of 4 fully hydraulic telescopic elements. Boom angle: +65°/-5°.
- Hydraulic System: Powered by a low-noise gear pump (19kW), insulation class H – Hydraulic operation via joystick and lever on the radio remote control – Filters and safety valves – maximum working pressure 22MPa.
Lodpfoy Eh Rzox Alkehf
- Steering: Via rear axle with electric motor. Steering angle +90°/-90°.
- Motor pump: Electric motor 19kW 80V AC, insulation class H.
- L.M.I.: Electronic load limiter “CE Standard” – With safety lights and the following display indications: Lifted load, maximum permissible load, load percentage indicator, lifting radius, boom angle, selected programme.
- Own weight: 14,000 KG, including 4,000 KG removable counterweight.
- Removable counterweights: Designed for quick removal and reinstallation to optimise ground and axle loads at any time.
- Radio remote control: For all crane and boom movements. If present, also for movements of hydraulic attachments.
- Crane classification according to UNI ISO 4301-1: A3
Iklan kecil
Crailsheim
11.089 km
Derek
JMGMC 130S
Hubungi
Kondisi: baru, panjang total: 4.630 mm, Tahun pembuatan: 2026, kapasitas angkut: 13.000 kg, kran-01
Ljdpfjy Eh Rusx Alkjhf
Iklan kecil
Crailsheim
11.089 km
Derek
JMGMC 130S
Hubungi
Kondisi: bekas, panjang total: 4.500 mm, Tahun pembuatan: 2023, kapasitas angkut: 13.000 kg, - Drive: Front axle powered by two 8.5 kW 80V AC electric motors, insulation class H.
- Battery: 80V – 900 Ah with charge and battery level indicator. Working time up to 8 effective crane operating hours.
- Brakes: Automatic brake system acting on all wheels.
- Frame: Manufactured from solid sections and welded high-quality steel plates.
- Tyres: Front no. 4 superelastic 300x15” Rear no. 2 superelastic 200x15”
- Boom: Manufactured from solid sections and welded high-quality steel plates, composed of 4 fully hydraulic telescopic elements. Boom angle: +65°/-5°.
- Hydraulic System: Powered by a low-noise gear pump (19kW), insulation class H – Hydraulic operation via joystick and lever on the radio remote control – Filters and safety valves – maximum working pressure 22MPa.
Lhsdpfjy Eh Ndsx Alkof
- Steering: Via rear axle with electric motor. Steering angle +90°/-90°.
- Motor pump: Electric motor 19kW 80V AC, insulation class H.
- L.M.I.: Electronic load limiter “CE Standard” – With safety lights and the following display indications: Lifted load, maximum permissible load, load percentage indicator, lifting radius, boom angle, selected programme.
- Own weight: 14,000 KG, including 4,000 KG removable counterweight.
- Removable counterweights: Designed for quick removal and reinstallation to optimise ground and axle loads at any time.
- Radio remote control: For all crane and boom movements. If present, also for movements of hydraulic attachments.
- Crane classification according to UNI ISO 4301-1: A3
Iklan kecil
Crailsheim
11.089 km
Derek
JMGMC 130S
Hubungi
Kondisi: bekas, panjang total: 4.500 mm, Tahun pembuatan: 2023, kapasitas angkut: 13.000 kg, de-fi
Lhodjy Eh Iyjpfx Alkef
Iklan kecil
Łódź
10.400 km
Mesin cetak injeksi
Arburg420C 1300-675
Hubungi
Kondisi: sangat baik (bekas), Tahun pembuatan: 2002, Arburg 420C 1300-675 with Star sprue picker
Year of manufacture: 2002
Injection unit:
Screw diameter: 50 mm
Shot weight: 297 g
Injection pressure: 2080 bar
Dosage volume: 353 cc
Clamping unit:
Clamping force: 130 t
Tie bar spacing: 420x420 mm
Platen size: 605x605 mm
Ejector: hydraulic
Clamping unit: hydraulic
Control system: SELOGICA
Additional equipment:
Euromap 12
Robot interface
Air valve x 2
Hydraulic core pull x 2
Injection unit hardened - Bimetal
Injection unit type: Vario - Offers the possibility to use the injection unit for side injection, for example
Operator side safety covers open automatically
Dimensions:
Weight: 4330 kg
Length/Width/Height: 4.80x1.64x2.08 m
Lodoy Dqvqepfx Alkjhf
Drive:
Pump/motor: 30 kW
Heating capacity: 14.9 kW
Total power: 44.9 kW
All machines offered are started up by our service technicians before sale.
It is possible to receive a video of the technical tests of the selected machine, or to participate in technical live tests at our company in Łódź.
Price: On request
Iklan kecil
Siedlce
10.199 km
Mesin penggilingan kayu CNC
CORMAKC1325 BSP Basic 1300x2500
Hubungi
Kondisi: baru, Tahun pembuatan: 2026, Efficient and precise CNC router CORMAK C1325 BSP, equipped as standard with SERVO drives, features a frame made of steel and cast iron, ensuring high rigidity and resistance to overload during operation. This machine is designed for machining and cutting wood materials, chipboard, MDF, OSB, plywood, as well as plastic materials such as PVC, plexiglass, and dibond. Operator training at our facility is included with every machine purchase!
Frame Construction
Rigid, welded steel construction
Gantry arms are made of thick, hardened, powder-coated sheet metal, increasing rigidity and thus improving the quality of machined parts.
Work Table
The hybrid work table features T-slots for manual clamping of materials up to 1300 x 2500 mm.
Drive System
High-power motors ensure optimal acceleration and speed in all axes.
Renowned HIWIN rack and pinion drives on X and Y axes deliver durability and precision.
All axes run on linear rail guides.
The machine comes with a tool height sensor.
Linear bearings: trapezoidal guides.
Spindle
Lsdsiz A Ezepfx Alkehf
Premium spindle characterized by durability.
Equipped with air cooling system.
Fitted with high-quality machine bearings for quiet operation and enhanced durability.
Tool height sensor included.
Spindle speed adjustable from 4,500 to 18,000 rpm.
Tool clamping via 3 ER32 collets (1/8", 1/2", 5-6mm).
Software
Supplied standard with ARTCAM PRO.
Optional: UCANCAM V11 CAD/CAM CNC software (Polish version available).
Software allows rapid and easy design; programs are converted to G-code. Import of ready files from other applications is supported.
DSP Control System
Digital Signal Processing technology.
The machine’s DSP controller features its own processor and RAM, providing reliable operation and simple use.
The controller guarantees smooth running and accuracy during machining.
After power loss, it is not necessary to reinitialize the program.
Built-in controller memory allows the machine to run without reloading programs each time.
Technical Specifications
Spindle: 5.5 kW / 18,000 rpm, frequency inverter, air-cooled
Working area: 1300 x 2500 mm
Max spindle height: 350 mm
Control: DSP
Software resolution: 0.001 mm
Software: Included
Power supply: 400V
Weight: 980 kg
Machine dimensions: 2100 x 3100 x 2200 mm
Table height: 715 mm
Guides: Linear
Drive transmission: Rack and pinion
IMPORTANT!
The machine is equipped with a function to remember the last G-code path. In the event of a failure or power loss, the machine resumes operation from the last position, eliminating time and material waste.
For further information, please contact us.
Iklan kecil
Hannover
11.047 km
Mesin cetak injeksi
Arburg420C 1300-350
Hubungi
Kondisi: baik (bekas), Tahun pembuatan: 2001, jam operasional: 56.380 h, nomor mesin/kendaraan: 184172, used injection molding machine
The machine comes with a complete service history, including all significant repairs and component replacements, such as hoses, etc.
Manufacturer: Arburg
Model: 420C 1300-350
Year of manufacture: 2001
Machine No.: 184172
Control system: Selogica
Operating hours: 56,380 h
Regular maintenance by manufacturer
Clamping unit
Lhodpevimd Nefx Alkef
Clamping force: 1300 kN / 130 tons
Tie bar distance: 420 x 420 mm
Platen size: 570 x 570 mm
Ejector stroke: 175 mm / 40 kN
Opening stroke: 500 mm
Mould installation height: 250 mm
Max. platen distance: 750 mm
Injection unit
Injection volume: 145 cm³
Shot weight: 127 g
Screw diameter: 35 mm
Injection pressure: 2500 bar
Extras:
- Hydraulic core pull
Available immediately from our warehouse in Hanover, loaded onto truck or delivered to your facility with freight charges paid by buyer
- Function-tested (guaranteed function up to first commissioning)
Iklan kecil
Koszalin
10.593 km
Mesin cetak injeksi
Arburg520C-1300-350 (163)
Hubungi
Kondisi: sangat baik (bekas), Tahun pembuatan: 1999, jam operasional: 95.616 h, gaya penjepit: 1.300 kN, diameter sekrup: 45 mm, tekanan injeksi: 1.670 batang, berat injeksi: 194 g, Arburg 520C-1300-350 (163)
with bimetallic plasticizing unit
General Information
Item number: 163
Availability: In stock
Year of manufacture: 1999
Brand: Arburg
Technical Data
Shot weight: 194 g
Clamping force: 1,300 kN
Lsdpfjvt Rvdox Alkohf
Screw diameter: 45 mm
Injection pressure: 1670 bar
Tie bar distance: 520x520 mm
Platen size: 715x715 mm
Minimum mold height: 250 mm
Control system: Selogica
Language: German
Power: 32.2 kW
Operating hours: 95,616 h
Weight: 6,380 kg
Dimensions: 5.1x1.9 m
Hopper: No
Core pull: Yes
Euromap interface: Yes
Iklan kecil
Wöllstadt
11.158 km
Mesin cetak pad E
TAMPOPRINTHermetic 130 Tampoprint E
Hubungi
Kondisi: sangat baik (bekas), Tahun pembuatan: 2020, Fungsionalitas: berfungsi sepenuhnya, Likuidasi pabrik produksi masker. Instalasi tahun 2021, tidak beroperasi sejak Maret 2022.
Peralatan sudah dibongkar dan siap kirim.
- Meja silang tersedia
- Sistem pengembalian tinta terintegrasi
- Gerakan samping terintegrasi namun dapat dinonaktifkan
Lhodjxqgk Ujpfx Alkjf
Seri HERMETIC dapat digunakan baik sebagai stasiun kerja manual maupun dalam sistem otomatisasi. Untuk penggunaan manual, mesin ini unggul dengan banyaknya opsi pengaturan dan daya tekan tinggi, sedangkan dalam integrasi otomatisasi, keunggulannya adalah kontrol cam yang memastikan proses pencetakan berjalan stabil dan tenang. Fitur utamanya adalah sistem penggeraknya: Gerakan naik-turun bantalan cetak serta gerakan maju-mundur klise cetak diatur menggunakan cam disc.
Segel kepercayaan
Dealer resmi yang disertifikasi oleh Machineseeker

Iklan kecil
Askersund
10.612 km
Mesin pelapis rol
BÜRKLESLC 1300
Hubungi
Kondisi: siap digunakan (bekas), Tahun pembuatan: 2003, Marke: Bürkle
Modell: SLC
Maschinen-Nr.: 10362-02
Baujahr: 2003
Technische Daten der Maschine (BÜRKLE SLC)
Allgemeine Daten
- Typ: SLC
- Arbeitsbreite: 1300 mm
- Arbeitshöhe: 900 ± 20 mm
Werkstücke
- Werkstückbeschaffenheit: Flach, eigenstabil
- Werkstückbreite (max.): Arbeitsbreite
- Werkstückbreite (min.): 350 mm
- Werkstücklänge: 3 - 100 mm
- Toleranz der Werkstückhöhe über die gesamte Arbeitsbreite:
- Einbahnige Bearbeitung: ± 0,5 mm
- Mehrbahnige Bearbeitung: ± 0,2 mm
- Werkstückgewicht (max.): 250 kg
Stapeln des Materials
- Prüfmaterial/Reinigungsmittel mit Selbstentzündungstemperatur: ≥ 200 °C
Transportaggregat
- Gegendruckrolle: Siehe Auftragsbestätigung
- Gummiring: Siehe Auftragsbestätigung
- Durchmesser: 186 mm
- Vorschubgeschwindigkeit: 8 - 25 m/min
Materialkreislauf
- Materialpumpenfördermenge (Doppeldruckhub): 575 cm³
Stapelanlage
Staplerolle
- Gummiring: Siehe Auftragsbestätigung
- Durchmesser: 238 mm
- Temperatur (bei optionaler Beheizung/Kühlung der Auftragswalze): max. 60 °C
- Umfangsgeschwindigkeit: ca. 8 - 25 m/min
Dosierwalze
- Durchmesser: 174 mm
- Temperatur (bei optional beheizter/gekühlter Dosierwalze): max. 60 °C
- Umfangsgeschwindigkeit: ca. 3 - 9 m/min
Ledpfxjv Hw Hcj Alkehf
Auftragsgenauigkeit über die gesamte Arbeitsbreite bei:
- Auftragsmenge > 10 g/m²: ± 5 %
- Auftragsmenge < 10 g/m²: ± 10 %
Verstellung der Durchlasshöhe
- Durchlasshöhe (max.): 120 - 5 mm
- Einstellgenauigkeit: ± 0,1 mm
Druckluftanschluss
- Erforderlicher Luftdruck: 6 bar
- Druckluftverbrauch: ca. 50 NI/min
Abmessungen / Gewichte
- Abmessungen: Siehe Aufstellungsplan
- Gewicht bei Arbeitsbreite 700 / 1300 / 1600 mm: 1250 / 1450 / 1600 kg
Elektrik
- Anschlusswerte, Spannungen: Siehe Elektrodatenblatt
Sonstiges
- Geräuschpegel: < 70 ± 4 dB (A)
Tabelle 1-4: Technische Daten für Standardgrößen der Maschine (Fortsetzung)
Hinweis: Die Geschwindigkeit ist auf maximal 20 m/min begrenzt, wenn die Dosierwalze und die Höheneinstellung auf einen Sicherheitsabstand von mehr als 120 mm (Reinigungskupplung) eingestellt sind.
Lager-Nr.: 2002442BXM
Iklan kecil
Tortona
11.260 km
Mesin bor
PAMAFMC 130
Hubungi
Kondisi: bekas, jarak pergerakan sumbu X: 4.100 mm, jarak lintasan sumbu Y: 2.500 mm, jarak gerak sumbu Z: 2.200 mm, kecepatan spindel (maks.): 3.000 rpm, kecepatan pemakanan sumbu X: 15 m/menit, panjang meja: 2.000 mm, lebar meja: 1.600 mm, diameter quill: 130 mm, langkah spindel: 800 mm, CNC HEIDENHAIN
PENUKAR ALAT 40 POSISI
Lhodpfjy A Rudjx Alksf
DILENGKAPI DENGAN KEPALA OTOMATIS MIRING
PERBAIKAN MENYELURUH RAM DAN SPINDEL
Iklan kecil
Wijchen
11.326 km
Mesin Pembengkokan Bundar Jammes-Promecam HC1 3040x6mm
Jammes-PromecamHC1 3040x6mm
Hubungi
Kondisi: bekas, panjang total: 5.250 mm, lebar total: 1.400 mm, tinggi total: 1.600 mm, de-to-hu-it-lt-001
Ljdpsw Elvhefx Alkohf
Iklan kecil
Belanda
11.348 km
2002 ARBURG Allrounder 420C 1300-350
ARBURGALlrounder 420C 1300-350
Hubungi
Kondisi: bekas, Tahun pembuatan: 2002, Mesin dalam kondisi baik dan dapat diperiksa saat beroperasi dengan perjanjian terlebih dahulu.
Ketersediaan: 06/2026
Deskripsi teknis lengkap tersedia dalam dokumen terlampir.
Gaya penjepit: 1300 kN
Gaya pembuka: 35/350 kN
Langkah pembukaan: 500 mm
Tinggi cetakan (min): 250 mm
Jarak maksimal antara pelat: 750 mm
Ljdpfx Aleyx D Ngjkjhf
Jarak antar batang silang: 420 x 420 mm
Gaya ejektor: 40 kN
Langkah ejektor: 175 mm
Langkah sekrup: 145 mm
Diameter sekrup: 35 / 40 / 45 mm
Tekanan injeksi: 2500 / 2120 / 1670 bar
Kami memudahkan pencarian untuk Anda: "uhlmann c130"
Anda akan menerima penawaran baru melalui email secara langsung dan gratis.
Anda dapat mengakhiri tugas pencarian kapan saja.








































































































































































































