Mesin pengemasan MAIR OFF-LINE .90.4.F

MAIR OFF-LINE Packing line .90.4.F

Kondisi: bekas, Automatic Packaging Machine Manufacturer: MAIR Model: .90/D/5/SL Automatic Strapping Machine with Wooden Slat Insertion Manufacturer: ITIPACK Model: SKE/M/TS-31 J-WILT/4MR Working Range Round diameter: 16 - 90 mm Csdpfx Ansvtp Hbjpsrc Thickness range: 0.8 - 5.0 mm Length: 3.5 – 10 m INCLUDES: - Roller conveyor (approx. 24 m) with 2 sections - MAIR .90/D/5/SL, suitable for hexagonal and rectangular bundles - Side bundle conveyor for strapping - ITIPACK automatic strapping machine SKE_M_TS-31J-WILT_4MR, with automatic insertion of support slats on all 4 sides - Longitudinal chain conveyor for strapped bundles - Bundle weighing station and coolant drainage - Cross chain section for storage - Electrical control and operator control panel. Thickness: 0.8 - 5.0 mm Tube diameter: 16 - 90 mm Length: 3.5 - 10 m Rectangular bundle: 200 x 200 mm - 650 x 520 mm Hexagonal bundle: 230 x 200 mm - 600 x 520 mm Max. bundle weight: 3 T

Kondisi: bekas, OTO 101.3 Tube Mill Line Manufacturers: OTO MILLS, SEUTHE, and THERMATOOL The line is currently in operation and can be inspected during production. The line is complete with: - OTO MILLS entry section with double decoiler, end-to-end strip joiner, and accumulator - CANTI-SAG TWL RS90 forming, sizing, and Turkish heads - THERMATOOL High-Frequency Welder CFI 300kW - SEUTHE TS90 flying saw - ATTL automatic packing unit - ITIPACK strapping unit - OSU metalizing unit Technical specifications: - Diameter: 32 – 101 mm - Square: 20 x 20 - 70 x 70 mm - Rectangular: 40 x 20 - 80 x 50 mm - Wall thickness: 0.8 – 3.0 mm - Tube length: 4 – 10 m - Voltage: 380V / 50Hz AC - Line direction: Left to right - Material: Carbon steel – hot rolled, pickled, galvanized, cold rolled - Yield strength: 330 – 520 N/mm² - Coil weight: 2x6,000 kg - Coil width: 50 – 250 mm - Coil inner diameter: 508 – 610 mm - Coil outer diameter: 1100 – 2000 mm Scope of supply: 1. OTO MILLS entry line with double decoiler, end-to-end strip joiner, and accumulator 2. Forming, sizing, and Turkish heads 3. THERMATOOL 300 kW welder 4. Fume extraction system 5. Cooling tunnel 6. Straightener 7. SEUTHE flying saw 8. Roller conveyor 9. Automatic packaging unit Crodpfoyl Uicsx Anpjc 10. Itipack strapping unit 11. Electrical system 12. Pneumatic system 13. Hydraulic system Tube diameter: 32 - 101 mm Square: 20 x 20 - 70 x 70 mm Rectangular: 40 x 20 - 80 x 50 mm Wall thickness: 0.8 - 3.0 mm Tube length: 4 – 10 m Line direction: Left to right Material: Carbon steel – hot rolled, pickled, galvanized, cold rolled Yield strength: 330 – 520 N/mm² Coil weight: 2x6,000 kg Coil width: 50 – 250 mm Coil inner diameter: 508 – 610 mm Coil outer diameter: 1100 – 2000 mm

Kondisi: bekas, AUTOMATIC STRAPPING STATION SIGNODE, model M400 The formed package is automatically transferred via the powered rollers of the discharge carriage to the automatic system. It will stop at the pre-programmed strapping positions to allow for the automatic application of the steel straps. Comprises: - SIGNODE automatic strapping machine, model M400/PA/TSM, for vertical strapping - Pneumatic floating strapping head for 32 mm (1¼") wide, 0.9 mm wall thickness steel strap - 450 kg strap dispenser with electric reel Csdjwxxz Repfx Anperc - Control panel SIGNODE automatic strapping machine: Model M400/PA/TSM for vertical strapping Pneumatic floating strapping head: for 32 mm (1¼") wide, 0.9 mm wall thickness steel strap 450 kg strap dispenser: with electric reel Control panel: Included

Kondisi: bekas, Tahun pembuatan: 2000, Fungsionalitas: fungsi terbatas, berat keseluruhan: 3.000 kg, panjang total: 1.500 mm, lebar total: 700 mm, tinggi total: 600 mm, tegangan masuk: 380 V, jenis arus masuk: tiga fasa, tahun perombakan terakhir: 2010, Joint Strip Oto Mills (penyambung pita), peralatan yang cocok untuk menyambung pita di pintu masuk akumulator roll forming. Crjdpexmaa Iefx Anpec

Tahun pembuatan: 2021, Kondisi: siap digunakan (bekas), tinggi total: 1.300 mm, panjang produk (maks.): 4.500 mm, Tube production line from 2021. This Bazhou Wanxin machine features a double-station decoiler, hydraulic shear, and butt welding machine, as well as a cold saw for precise pipe cutting. It is suitable for round pipes with diameters from Ø16 to 63.5 mm and offers a feed speed of up to 120 m/min. Consider the opportunity to purchase this Bazhou Wanxin tube production line. Contact us for more details. • Double-station decoiler • Function: Passive coil unwinding • Design: Two stations with 180° rotation; manual expansion • Benefit: Fast loading, easy operation • Hydraulic shear and butt welding machine • Function: Cutting of leading and trailing strip ends, centering and rewelding • Design: Manual hydraulic shear with boom; front/rear pressure rollers; front/rear centering rollers; welding device • Cutting process: Hydraulic shear • Pressing process: Dual-cylinder press • Welding process: Manual welding • Coil accumulator • Function: Ensures continuous production during coil change • Design: Frame construction with movable and fixed frame (incl. feed unit) • Feed speed: max 120 m/min • Accumulation speed: max 200 m/min • Accumulated strip length: 200-400 m • Pinch roll motor: AC 11 kW • Forming and sizing mill • Working height: +850 mm • Main drive power: AC/DC motor 160 kW, 1000-2000 rpm; reduction gearbox: hardened gears; transmission: spiral bevel gear drive • Entry/forming: Passive 5-roll straightener; vertical guide rolls for strip feeding; forming with 7 horizontal + 8 vertical roll stands • Guiding/pressing/deburring/cooling/sizing: 6 horizontal + 5 vertical roll stands; 1 round sizing stand • Round sizing stand: 1 smoothing unit; 2 sides with 8 rolls (4 per side); Ø30 mm rolls, 40Cr, tempered/hardened • Horizontal roll shaft: Ø60 mm, bearing seat 55, material 40Cr; surface hardness HRC 50-55 • Vertical roll shaft: Ø40 mm, material 40Cr, tempered/hardened • Bearing slide: Forged steel 45# • Stand type: Gantry; opening width 120 mm; horizontal clamping via worm gear adjustable • Stand material: Welded, stress relieved • Pinch roll shaft: Ø50 mm, 2 rolls, manual screw adjustment • Guide shaft: Ø40 mm • Deburring knives: 2 pieces (1 in use, 1 spare) • Cooling tank: Included in delivery • Cold saw (Type KK-5-50) • Function: Cutting pipes to preset length at line speed • Pipe diameters: Round Ø16-63.5 mm (and appropriate square/rectangular) • Cut length: 1-6 m • Material thickness: 0.6-2.5 mm • Saw motor: 11 kW AC with frequency converter • Feed motor: 2.9 kW servo (Yaskawa) • Drive motor: 11 kW servo motor (Yaskawa) • Feed mode: Servo multi-stage speed • Tracking speed: max 110 m/min • Clamping: Pneumatic • Saw blade: Ø400 mm • Saw reduction gearbox: Model KK-80 • Saw stroke (rack length): 3 m Note • The technical data and descriptions are taken from the original order confirmation and are for information only; they are not binding. Additional equipment • Conveyor line, table, and bundling machine • Function: Automatic pipe transfer from the rolling mill to the table; packaging in hexagonal bundles • Conveyor length: 16 m • Drive: 1 motor YCT200-4A, 5.5 kW Codpfx Anjyhfvljperc

Kondisi: bekas, Unidad de soldadura de punta/cola OTO MILLS, 100% automática Csdpfx Anoymatvsporc Modelo GG566 - Proceso completo de unión y soldadura automática - Mesa de salida de tiras con encoder - Pinch-roll motorizado de salida de banda OTO Mills Unidad de soldadura de punta/cola 100% automática: GG566

Kondisi: bekas, Automatic Packing Machine MAIR, MPS RH150/D/4/SL & SIGNODE Automatic Strapping Unit M400 Cjdpeymahysfx Anpjrc 1. MAIR PACKING MACHINE, model MPS RH150/D/4/SL The MPS RH150/D/4/SL Pat. model automatically packs round tubes into hexagonal bundles. The machine enables fully automated strapping operations at a fixed position, with the bundle moving laterally and automatically stopping at the programmed strapping positions. It consists of: - Four-tube chain conveyors with support teeth and intermittent drive for raising one tube at a time, coming from the threading machine, to the alignment area. - A drive roller to align the tube against an adjustable end stop before row formation. - Two storage areas for tube rows, needed during the bundle evacuation cycle. - A robust welded structural steel frame forming a bridge. - A tube row handling system that picks up one row of tubes at a time from the second-row storage and places it on the bundle forming supports. - Handling is performed by a series of electromagnets that execute a rotary movement during the row transfer cycle. - Four powered vertical supports for the formation and retention of bundles. These are fitted with adjustable blades according to the required bundle size and shape and are lowered to allow the bundle to be transferred onto the evacuation carriage. - Powered evacuation carriage sliding on floor-mounted rails and equipped with driven lower rollers and pairs of free vertical retaining rollers. - Motorized flat conveyor to transport the bundle after the strapping area. - Powered storage chains suitable for bringing the bundles to the preselected quantity. - Draining station for lifting the bundle, allowing coolant to drain from the tubes; equipped with two hydraulic devices powered by a hydraulic unit. - Control cabinet. 2. SIGNODE AUTOMATIC STRAPPING STATION, model M400 The finished bundle is automatically conveyed, by the evacuation carriage's motorized rollers, to the automatic system. It stops at the programmed strapping positions for the automatic application of steel straps. It consists of: - SIGNODE automatic strapping machine model M400/PA/TSM for vertical strapping - Pneumatic floating strapping head for steel strap of 32 mm width (1¼") and 0.9 mm wall thickness - 450 kg strap dispenser with electric de-coiler - Control panel 3. WEIGHING STATION, model KG8/DY The station weighs tube bundles using load cells. Powered storage chains move the bundles into weighing position. The weighing unit is located beneath pneumatic lifting devices that raise the bundle to enable the weighing process. It consists of: - Lower frame for floor mounting, complete with four supports, hooks, and load cells - Upper clamping frame, able to receive the bundle lifting devices - Compact weight transmitter 4. SOFTWARE, model DATAPACK 3/T The Datapack Management System software allows the operator to: - Monitor and supervise tube production in real time - Set up a new bundle configuration...

Kondisi: bekas, es-en Cedpfx Anoyma Adjporc

Kondisi: bekas, HA506RT_Accumulator_ES Crodpfx Ansymarxspsc

Kondisi: bekas, MULTI-HEAD TUBE CUTTER TRA3000/7/8, manufactured by MAIR Scope of supply: 1. Loading Table with: - Motorized sling loader for loading a complete bundle - Side chain conveyor for feeding the tubes one by one - Upper arm with vertical adjustment (to prevent loading two tubes at once when working with small diameters) - Longitudinal stop and tube loader 2. TRA3000 Cutter: - 7 independent cutting heads - All heads can be raised individually - Linear guide with ruler for positioning the cutting heads - Centralized tube transport system with adjustable production cycle 3. Double collecting cradle RA3, with: - Independent cradles for collecting the cut tubes - Side separators in the cradles to adapt length to the tube - Motorized endless slings for gentle tube collection Note: With the double cradle system, it is possible to carry out bundling and strapping on cradle 1 while production continues on the machine without stopping. 4. Main electrical cabinet and control panel. NOTE: - This machine has worked very few hours. - Mechanical condition is very good. - Only requires cleaning and repainting to look "as new" Max. Infeed tube length: 8000 mm Bundle loader: 3 T Max. load capacity: 3000 kg Round tubes (outer Ø): 12-60 mm Square tubes (HxW): 12x12-40x40 mm Rectangular tubes (HxW): 12x16-50x30 mm Crsdjymaw Uopfx Anpoc Min.-Max. thickness: 0.8 - 3.0 mm (depending on yield strength) Cutting lengths: 330 - 7900 mm Max. straightness tolerance: 1 mm/m Number of cutting heads: 8 Motor power: 2.2 kW Cutting disk diameter: 300 mm