Mesin produksi pintu

Maka by Kuper

Kondisi: bekas, Tahun pembuatan: 2001, Timber dimensions to be processed: Input lengths min/max: 500 - 6500 mm Full optimization up to max. 1500 mm Input widths min/max: 40 - 300 mm Input thicknesses min/max: 15 - 120 mm Maximum timber cross-section: 300 x 40 mm or 200 x 120 mm Fixed lengths after saw, min./max.: 510 – 2800 mm Special application: Cutting blocks, length min/max: 100 – 200 mm (Note: Multiple block lengths in new sorting; blocks are transported to the end of the sorting line and fall into customer-supplied mesh boxes) Cut-off/trimming tolerance: +/- 0.8 – 1.5 mm (for timber with minimal resin content and even surface. Tolerance up to 1m fixed length max.; tolerance for longer parts up to 2.5m). Thickness tolerance: +/- 3 mm Curvature of timbers in any direction: max. 10 mm per meter length Timber species: Softwood or hardwood System performance: Feed speed: steplessly adjustable up to max. 230 m/min Cutting cycle: 0.6 – 1 sec To attain the practical daily capacity, effectiveness factors dependent on the customer’s production conditions must be considered. Infeed height and saw: 900 mm Bwjdpfx Ajw Sy T Hsa Toi (To be mounted on customer-side platform, saw requires concrete base) Sorting height: 2000 mm Connection data: Total electrical connected load: approx. 18 kW Operating voltage: 380 Volt / 50 Hz Maximum voltage fluctuation: 5 % Compressed air consumption: approx. 1200 NL/min Operating pressure: approx. 8 bar Extraction speed: approx. 30 m/s Paint color: pebble grey RAL 7032 and blue NCS 5030-R 80 B POSITION OVERVIEW: Pos. 1: Infeed and marking station with 1 adjustable side support table, 1 table as stop edge Pos. 2: Non-driven support roller, front end in front of sheet metal table for easier loading Pos. 3: Length measuring station with built-in fluorescence camera for detection of defect markings Pos. 4: Automatic contactless width measurement Pos. 5: Optimizing cross-cut saw OptiCut 304 – right-hand version, with built-in waste chute, includes equipment package for large timber cross-sections Graphic input terminal (16 x 40 characters, numeric keypad) with software package for optimization and plant control Processing capability: - max. 16 product groups - max. 8 grades per product group - max. 200 fixed lengths per product group Pos. 6: Outfeed conveyor as sorting station with drive unit, length 7500 mm Pos. 7: 2 ejectors mounted on the outfeed conveyor Location: Nattheim

Kondisi: sangat baik (bekas), Line for door frames (casings), for cutting, milling of strike plates and insertion of hinges (ANUBA) composed of: Bwodpeqwyclsfx Aa Toi X10030A) Discharge conveyor X10030B) Transfer unit X10030C) Double cutting and drilling machine "AMS" - Left side cut 45° - Drilling - Cut 90° - Right side cut 45° - Drilling X10030D) Angle conveyor (90°) X10030E) Anuba hinge insertion machine "MASTERWOOD" Model MULTITEC X10030F) Strike plate milling machine "MASTERWOOD" Model Teknomat 3000

Kondisi: baik (bekas), Tahun pembuatan: 2007, nomor mesin/kendaraan: 94323, jarak pergerakan sumbu X: 3.060 mm, jarak lintasan sumbu Y: 1.260 mm, jarak gerak sumbu Z: 150 mm, tinggi total: 2.400 mm, panjang total: 4.400 mm, lebar total: 2.800 mm, berat keseluruhan: 3.130 kg, FOR SALE: CNC MACHINING CENTER IN CONTINUOUS OPERATION Biesse ROVER 3.03 CNC Machining Center Fully operational, available for inspection in Wadowice Travel X: 3060 mm Travel Y: 1260 mm Travel Z: 150 mm Control type: CNC XP 600 Bwedpfxswpthts Aa Toi

Kondisi: baik (bekas), Tahun pembuatan: 2007, deu-TECHNISCHE_DATEN-Max_bearbeitbare_Laenge_3200_mm_Min_bearbei tbare_Laenge_200_mm_Max_Breite_200_mm_Min_Breite_40_mm_Max_Werkst ueckhoehe_130_mm_Tiefe_bei_max_Tenonierstift_Durchmesser_320_mm_1 05_mm_Tenonierwagen_Geschwindigkeit_min_max_0_100_m_min_Profilier geschwindigkeit_min_max_3_15_m_min__TENONIEREN_1_Stirnschnittsaeg e_5_5_PS_4_kW_Saegeblatt_D_400_mm_2_Tenonierfraeser_Gegenlager_50 _x_620_mm_15_PS_11_3_kW_Max_Werkzeugdurchmesser_320_mm_Achshub_57 5_mm_Automatischer_Ausrei_sschutz_3_Tenonierfraeser_Gegenlager_50 _x_620_mm_15_PS_11_3_kW_Max_Werkzeugdurchmesser_320_mm_Achshub_57 5_mm_Automatischer_Ausrei_sschutz_Vertikale_Positionierung_mit_du rchgehender_Achse_4_Digitale_Winkelverstellungsspannvorrichtung_P ROFILIEREN_5_Profilierfraeser_rechts_Schaft_50_x_320_mm_10_PS_7_5 _kW_Werkzeugdurchmesser_130_240_mm_Achshub_280_mm_Zeitversetzter_ Anti_Ausbraakschutz_bei_Kalibrierung_Doppelte_Drehrichtung_Vertik ale_und_horizontale_Positionierung_mit_durchgehender_Achse_6_Prof ilierfraeser_rechts_Schaft_50_x_320_mm_10_PS_7_5_kW_Werkzeugdurch messer_130_240_mm_Achshub_280_mm_Vertikale_und_horizontale_Positi onierung_mit_durchgehender_Achse_7_Profilierfraeser_rechts_Schaft _50_x_320_mm_10_PS_7_5_kW_Werkzeugdurchmesser_130_240_mm_Vertikal e_und_horizontale_Positionierung_mit_durchgehender_Achse_8_Restte ilrueckgewinnungsgruppe_Vertikale_und_horizontale_Positionierung_ mit_durchgehender_Achse_Vorrichtung_zum_Fluegelauszug_Hfutwt78Z_9 _Untere_horizontale_Nutwelle_Vertikale_und_horizontale_Positionie rung_mit_durchgehender_Achse_88_5_PS_66_4_kW_10_Digitale_Fuehrung _11_Ruecklauf_der_Werkstuecke_zum_Bediener Bodpfx Aot R T Hcja Tjwi

Kondisi: bekas, nomor mesin/kendaraan: 4/14242, Frank floor sanding machine FSR used Motor power: 0.75 kW Voltage: 230 Volts 5 Amps, 50 Hz Machine no.: 4/14242 Dust bag included Bodjb Auu Repfx Aa Tewi Location: Ex stock Bitburg

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 1988, - Completely overhauled in 2022 - Heidenhain TNC320 CNC control Bjdswhk Ubjpfx Aa Tjwi - CNC or manual operation possible - Movable vertical milling head with extendable spindle - Counter bearing for long milling arbors - Hydraulic tool clamping - Automatic transmission - Automatic clamping on X, Y, and Z axes - Central automatic lubrication - Coolant system - Direct path measurement - Collision protection coupling on Y and Z axes - Year of manufacture: 1988 - Includes tool holders, drilling/milling tools & tool trolley Specifications Working Area: - X-axis (longitudinal): 485 mm - Y-axis (cross): 385 mm - Z-axis (vertical): 380 mm - Quill stroke (vertical): 80 mm - Vertical milling head manually movable on spindle block: 150 mm Main Drive: - Pole-changing three-phase brake motor: gearbox with forward/reverse - Power: 3.7 / 4.4 kW - Spindle speeds: 63 - 3150 rpm (18 steps) - Step increment: 1.25 - Tool holder: SK40 (M16) - Tool clamping: disc spring pack - Tool release: hydraulic Feed Drive: - X-axis: 1 DC motor - Y & Z-axis: 1 DC motor - Ball screws: all axes - Feed rate: 2 - 3000 mm/min (programmable) - Rapid traverse X/Y/Z-axis: 3000 mm/min Table Slide: - T-slots quantity: 4 - T-slot width: 14H7 mm - T-slot spacing: 63 mm - Permissible load: approx. 600 kg Installation: - Footprint (with safety area): approx. 2300 x 2500 mm - Machine weight incl. vertical head and angle table: approx. 1830 kg - Operating voltage: 400 V - Total connected load: 12.5 kVA - Floor load: 3000 kg/m²

Kondisi: sangat baik (bekas), Tahun pembuatan: 2004, Clamping force: 25/35 tons Opening stroke: 200 mm Mold height: 150–300 mm Platen distance: 350–500 mm Tie bar spacing: 221 mm Bwjdpfjuykh Djx Aa Tsi Mold mounting plates (W x H): 342 x 250 mm Ejector stroke: 60 mm Screw diameter: 30 mm Screw stroke: 100 mm Injection volume: 70 cm³ Shot weight: 59 g Injection pressure: 1040 bar Operating hours: 34,748

Kondisi: bekas, • Type – 490P/LFB/1Q+14 No. 2020/6450 • Semi-automatic machine for split web material • Cutting head can be automatically switched between longitudinal and cross cutting • Digital display for longitudinal and cross cuts • Cross cut motorized • Longitudinal cutting by pulling the cutting bridge over the cutting table • Entire table is pneumatically tiltable • Air cushion • Breaking bars • Working height approx. 900 mm • Table length – 3800 mm, width – 2500 mm • Width with cutting bridge 2800 mm • Year of manufacture approx. 2020 • Price on request Bedpjwcz Riofx Aa Tswi

Kondisi: sangat baik (bekas), Tahun pembuatan: 1980, WAFIOS DF5 Bwedpfx Aasv Uw Ddj Tsi Wire range: 1.5 to 5.0 mm Mesh width: 20 to 100 mm Working width: up to 2000 mm Output capacity: 170 m²/hour Tooling for mesh width: 60 mm

Kondisi: baru, Special offer price for stock items! Only while stocks last! Price ex warehouse, plus VAT. Belt Grinding Machine: Bernardo Type/Model: MS 75 x 2000 S Condition: New Belt dimensions: 75 x 2000 mm Belt speed: 29 m/sec Contact wheel Ø x W: 200 / 80 mm Flat grinding table: 460 x 75 mm Extraction port: 100 mm Motor output S1 100%: 3.0 kW Motor input S6 40%: 4.0 kW Voltage: 400 V Length: 1080 mm Width: 440 mm Height: 1000 mm Weight approx.: 66 kg Features: - High grinding performance due to high belt speed - Quick adjustment for horizontal and inclined positions - Continuous flat grinding surface for optimal processing of long workpieces - Constant belt tension thanks to a spring-loaded tensioning device - Versatile use for grinding edges, surfaces, and for cylindrical grinding - Incl. quick clamping system for fast belt change Bjdpfx Aasfnr Aio Tswi - Easy parallel belt tracking adjustment via set screw - Graphite coating on grinding surface enhances belt glide properties Scope of delivery: - Abrasive belt grit K 80 - Hinged safety screen - Grinding and support table - Workpiece stop - Dust extraction nozzle - Separate off-switch - Base frame