Mesin frais Maka T 2000

Maka T 2000

Kondisi: baik (bekas), Tahun pembuatan: 1994, Fungsionalitas: berfungsi sepenuhnya, Putaran kiri-kanan, 3-1000 rpm, motor rem dengan feeder 3-rol Haffner, 8 kecepatan, kondisi bagus, 5,5 kW. Transportasi dapat dilakukan dengan biaya tambahan! Itjdpoybv A Aofx Akajg

Kondisi: baik (bekas), Tahun pembuatan: 1984, SAC mesin jointer bekas SAC FS 430 - Lebar penyerutan: 430 mm - Panjang meja: 2,90 m - Poros pisau 120 mm dengan 4 bilah pisau jointer Iedpfxex Nrvvo Akajtg - Motor 3 KW, 380 Volt - Rem motor otomatis - Pengambilan serpihan 8 mm - Pagar pengarah miring hingga 45° - Pengarah bantu Aigner dapat diputar - Pelindung kerja tipe jembatan (penutup pisau) - Model rendah kebisingan dengan bibir meja baja bergerigi - Sok hisap serbuk - Berat sekitar 650 kg Lokasi: di lokasi pelanggan - tersedia segera - Penjualan sebelumnya tetap diperhitungkan

Kondisi: sangat baik (bekas), Very good condition. Ijdpfx Akeyxnxljajtg

Tahun pembuatan: 1989, Kondisi: hampir baru (bekas), Spindle diameter 30 mm Motor power 5.5 kW 5 spindle speeds: 3000/4500/6000/8000/10000 rpm Itodpfxjhi Tv Hs Akaeg Year 1989 Option to purchase without feed

Kondisi: baik (bekas), jenis bahan bakar: diesel, berat keseluruhan: 13.800 kg, volume sekop: 0,51 m³, Perlengkapan: kabin, HYUNDAI ROBEX 130 LC Excavator Operating Weight: 13.8 t Transport Length: 7.76 m Transport Width: 2.6 m Transport Height: 2.74 m Bucket Capacity: 0.51 m³ Undercarriage: LC Itodpfx Akowhcgpjaog Track Width: 600 mm Boom Type: MB Model Series: 3 Engine Manufacturer: Cummins Engine Type: B3.9C Engine Power: 75 kW

Kondisi: baru, Tahun pembuatan: 2025, Fungsionalitas: berfungsi sepenuhnya, tegangan masuk: 230 V, lebar perataan: 330 mm, kecepatan rotasi (maks.): 9.000 rpm, lebar total: 615 mm, tinggi total: 555 mm, panjang total: 850 mm, penghilangan serpihan: 3 mm, jenis penyesuaian ketinggian: mekanis, jumlah rol pemakan: 1, jumlah mata pisau planer: 36, tinggi penyerutan: 156 mm, PS33 with Helical Cutterhead • Innovative design and powerful motor. • Material removal rate of up to 3.2 mm. • Infeed and outfeed tables. • Double-knife cutterhead with double-sided knives. • Indicator at the front of the machine displays the amount of material being removed. • Planer shaft with reversible knives. • Does not require an extraction unit, thanks to an integrated fan that removes chips directly from the cutterhead. • Depth stop with seven positions for repeated thickness planing at the same height. • Maximum workpiece width up to 330 mm. • Model: PS33 • Recommended use: Tradesmen • Input power (230 V): 1.8 kW • Cutterhead speed: 9,000 rpm • Cutterhead diameter: 46 mm • Number of reversible inserts in the cutterhead: 36 pcs • Insert size: 15 x 15 x 2.5 mm, R=150 • Feed speed: 7.9 m/min • Max. depth of cut: 3.2 mm • Max. planing width: 330 mm • Max. planing thickness: 156 mm • Min. workpiece length: 120 mm • Chip extraction: integrated fan, 62-mm suction port or dust bag • Noise level: 96 dB • Machine dimensions (L x W x H): 340 x 615 x 555 mm • Machine dimensions with tables extended (L x W x H): 850 x 615 x 555 mm • Machine weight: 35 kg • Packing dimensions (L x W x H): 415 x 660 x 545 mm • Package weight: 39 kg Included in the package: • 36 carbide reversible knives (installed in the cutterhead) Iodpfxsvncu Ie Akaetg • 5 spare carbide reversible knives and screws • Waste bag for sawdust and chips • Connection kit for waste bag • Torx key for changing reversible knives (TX25)

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2007, jam operasional: 22.605 h, Fungsionalitas: berfungsi sepenuhnya, gaya penekanan: 100 t, lebar bukaan pengisian: 1.100 mm, panjang bukaan pengisian: 1.600 mm, lebar bal: 1.100 mm, tinggi bal: 1.100 mm, berat bal: 1.400 kg, berat keseluruhan: 36.000 kg, kapasitas tangki oli: 1.300 l, For sale is a refurbished baler with 100 t press force, large-format bales 1100 x 1100 mm, 75 kW drive power and 10-way cross-tying. Technical specifications baler: Manufacturer: Bollegraaf Model: HBC 110 K / 75 kW Year of manufacture: 2007 Main press force: 100 t Pre-press force: 50 t Operating hours: 22,605 h Feed opening dimensions: 1,600 x 1,100 mm Filling volume / press cycle: 3.15 m³ Theoretical cycle time: 19 seconds Bale size: 1,100 x 1,100 mm Drive power: 75 kW Connected load: 126 kW Total current consumption: 238 A Tying: 5-fold vertical, 5-fold horizontal, fully automatic Throughput at bulk density of: - 30 kg/m³: approx. 16 t/h - 50 kg/m³: approx. 25 t/h - 100 kg/m³: approx. 47 t/h Bale weight up to 1,400 kg, depending on material and bale length Hydraulic oil tank capacity: approx. 1,300 l PLC control: Telemecanique TSX Micro Itodpfx Akjvf E Avsaog Operating panel: Schneider MAGELIS Touch Baler dimensions with hopper: 11,750 x 5,000 x 7,105 mm (L x W x H) Transport dimensions without baler: 11,765 x 2,500 x 3,450 mm (L x W x H) Baler weight: approx. 36 t Remarks: The baler has been partially overhauled, serviced in our workshop, and tested after completion of work before being stored. The machine is available at short notice and can be inspected at our warehouse by appointment. The following refurbishment works have been carried out: - Descaling and partial repainting of the baler. - Hydraulic oil tank drained, oil and air filters replaced. - New hydraulic oil filled. - All hydraulic hoses renewed. - Main hydraulic cylinder, two cylinders of the pre-press flap and the channel cylinder disassembled, dismantled, inspected, cylinder tubes honed, all seal kits replaced and final pressure tested. - Pre-press flap with bearings and bearing blocks disassembled. First and third circular arc segments removed and newly welded in. - Both shaft bearings for the pre-press flap renewed. - Upper material guide on the frame for the pre-press flap renewed. - Plunger disassembled, inspected and both front roller guides renewed. - Material guides and wear strips at the sides and on the bottom of the plunger cut out and newly welded in. - Horizontal and vertical needle and tying units disassembled, dismantled, inspected, plastic slide plates, bearings on twister shafts, and wire divert rollers with bearings in the needle heads renewed. - Both bronze slide rails left and right in the frame cover for the plunger renewed. - Both wire divert units left and right, including bale retaining clamps, fully renewed. - Wire infeed unit including hydraulic cylinder below the needle passes fully renewed. - Wire mark/scoring in the bottom and sidewalls of the channel welded up and smoothed. - General maintenance and service work carried out in line with manufacturer specifications. - Baler tested in manual and automatic mode, accepted and stored after completion of refurbishment works. We assume no liability for the technical details or possible errors.

Kondisi: bekas, Tahun pembuatan: 1995, Spindle tiltable: Yes, -5° to 45° Height adjustment: Handwheel Swivel adjustment: Handwheel Fence adjustment: Manual Height display: Mechanical counter Swivel angle display: Mechanical counter Fence position display: Mechanical counter Spindle diameter: 30 mm (new spindle) Speeds: 3000, 4500, 6000, 9000 rpm Motor power: 5.5 kW Motor brake: Yes, automatic Extraction connection: 2 x 120 mm Machine length: 2000 mm Machine depth: 1400 mm Iedjuzkwzjpfx Akajtg Weight: 900 kg

Kondisi: sangat baik (bekas), Tahun pembuatan: 1982, Table saw ULMIA 1710s Year of manufacture: 1982 Itedpfx Aeufgnzokaog Tilting angle: 45° Cutting length on sliding table: 750 mm Maximum blade diameter: 250 mm Cutting height: 75 mm Cutting width between saw blade and fence: 650 mm Sliding table equipped with angle cutting scale Table dimensions: 1000 x 630 mm

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 1997, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 690924, Connection rating 380V 1.84kW Speed 2840 rpm Number of spindles: 21 units, 32 mm pitch Spindle spacing 640 mm Spindle rotation: 11 right-handed, 10 left-handed, M10 thread Ijdpfjh U Damjx Akaetg 2x safety clamps Pneumatic foot valve Table size 880 x 400 mm 1x side stop with 2 flip stops 1x base stop 1x mitre stop Please note: We are unable to respond to inquiries without complete contact details.