Mesin pengecatan dan pengamplasan vakum

Makor Gemini 56

Kondisi: baru, Tahun pembuatan: 2024, Crosscut saw with electronic pusher and controlled axis. Cutting capacity: 55 x 360, 80 x 340, 95 x 325, 125 x 295, 135 x 280 mm Minimum workpiece thickness: 10 mm Working table inclined by 8° Technical features of the cutting unit: Pneumatic upstroke saw TR500 Motor power 10 HP (7.5 kW), 400V/50Hz TCT blade diameter 500 mm, bore 30 mm, Z=144, S=4.6 Cutting cycle speed: 4 seconds Technical features of the feed system: PUSH FEED SYSTEM AVAILABLE FOR LEFT AND RIGHT SIDE Feed via rack-and-pinion system and brushless motor Positioning accuracy +/- 0.4 mm Powerful feed motor for bundle weight of up to 80 kg Lsdpohw Ng Iofx Aahehr Maximum feed system speed 90 m/min Pneumatic pusher lift-up at end of cutting cycle and overhead return Data input management: 12” TOUCH-SCREEN controller (800x600 pixels) USB port Ethernet port LINUX operating system Loading and saving of machine parameters via USB port Editing and direct input of cutting cycles (patterns) at controller Transferring cutting lists created on PC via USB or Ethernet port Operating software: Manual entry of load board length Partial optimization without board length reading Cutting cycle with 3 optimization options (maximum length, sequence, and board order) Up to 1,000 cutting lists with 11 dimensions or one list with 10,000 consecutive dimensions "OPTI" package: automatic board length detection and full optimization. Piece length reading via photocell Cutting cycle with 6 optimization criteria (longest length, sequence, board order, volume, minimum waste, and priority length) "OPTI PLUS" package: total optimization with knot and defect removal (OPTION NOT INSTALLED ON THE MACHINE) Technical description: “OPTI PLUS” package: for removal of knots and defects Photocell for reading knots and defects during wood mapping Marking with fluorescent chalks/crayons (Note: can only be ordered in combination with ZA250) Pneumatic side clamping device

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, Foundry zu verkaufen. Die Immobilie umfasst 15 Gebäude und 6 Hektar Land. Das Objekt befindet sich im Industriegebiet Karhula, direkt bei der Stadt Kotka im Südosten Finnlands. Karhulan Valimo wurde in den 1880er Jahren gegründet. Im Jahr 1902 wurde die Gießerei mit einer Holzschleiferei, einer Glasfabrik, einer Ziegelei und einer Maschinenbauwerkstatt zur Karhula Oy fusioniert. 1915 wurden die Karhula-Werke an die Ahlström Corporation verkauft. Die derzeitige Gießerei wurde 1960 erbaut und im Jahr 2000 von Ahlström an Sulzer Pumps Finland verkauft. 2016 entschied Sulzer Pumps, die Gießerei zu schließen; sie wurde daraufhin an Karhulan Foundry Oy verkauft, welche jedoch im März 2021 Insolvenz anmeldete. Die Gießerei war in ihrer Geschichte insbesondere für die Herstellung anspruchsvoller Gussteile aus hochlegierten Stählen bekannt. 2022 erwarb Karhu Assets Oy die Anlagen und Maschinen der Gießerei. Die meisten Geräte der Putzerei wurden bereits verkauft, während der Großteil der Maschinen in der Formerei und Stahlwerksabteilung noch vorhanden und verfügbar ist. Alle zehn Wärmebehandlungsöfen sind vor Ort und stehen zum Verkauf. Besichtigungen sind nach Vereinbarung willkommen! Der Standort der Ausrüstung ist Kotka, 48600, Finnland. Der Verkauf erfolgt ab Werk (EXW) Kotka im aktuellen Zustand. Die Flugzeit von den meisten europäischen Städten nach Helsinki beträgt ca. 2 Stunden. Die Entfernung per Autobahn von Helsinki nach Kotka beträgt ca. 120 km (1 Stunde). Lhsdpfouxmt Tsx Aahjr Eine persönliche Besichtigung der Gießereimaschinen ist jederzeit möglich und wird ausdrücklich empfohlen! Gebrauchtmaschinen: Sämtliche Maschinen, Anlagen und Artikel werden in gebrauchtem Zustand verkauft. Keine Garantie, Gewährleistung oder Rückgabe: Der Verkäufer übernimmt keine Garantien oder Gewährleistungen. Ein Umtausch oder eine Rückerstattung ist ausgeschlossen – der Käufer trägt das Risiko. Wie besichtigt: Der Käufer muss die Ware vor dem Erwerb vor Ort besichtigen. Nach erfolgter Besichtigung ist der Verkauf endgültig. Für nachträglich entdeckte Mängel übernimmt der Verkäufer keine Haftung.

Tahun pembuatan: 2013, Kondisi: siap digunakan (bekas), Connected load: 4 kW, weight: 1 t. Ljdpfxohlp Efo Aahehr

Kondisi: diremajakan ulang (bekas), AUTOMATIC COMPLETE DRILLING LINE, max. working width 3200 mm, with high-speed automatic handling equipment. Comprising the following machines: A) FEEDING STATION "RBO" Winner C 3200 with double pick-up and central motorized roller conveyor table. Equipped with 2 floor-mounted motorized roller tracks for in-feeding panel stacks to the loader. B) ROLLER CONVEYOR (Connecting roller table with 90° transfer belts) "RBO" Transfer TA 90° C) 1st AUTOMATIC DRILLING MACHINE "BIESSE" Mod. Techno FDT with 2 horizontal drilling units + 7 lower vertical drilling units Ledpfxjdfgg Is Aahshr D) 2nd AUTOMATIC DRILLING MACHINE "BIESSE" Mod. Techno FDT with 2 horizontal drilling units + 7 lower vertical drilling units E) ROLLER CONVEYOR (Connecting roller table with 90° transfer belts) "RBO" Transfer TA 90° G) STACKING STATION "RBO" Winner SC 3200 with double pick-up, double stacking station, and central motorized roller conveyor table. Equipped with 2 floor-mounted motorized roller tracks for out-feeding panel stacks from the unloader.

Kondisi: baik (bekas), Tahun pembuatan: 1994, 2-sided planer, top and bottom Constant table height (always consistent feed height) Max. planing width: 600 mm Max. planing height: 280 mm Cutterheads with strip knives Lhsdpfehuthyjx Aahor Immediately ready for operation

Tahun pembuatan: 1988, Kondisi: perlu perbaikan (bekas), Mekanisasi untuk di depan mesin serut untuk KVH/BSH – untuk panjang hingga sekitar 13 m. Instalasi KVH+BSH ideal untuk di depan mesin serut. Pemisahan memanjang – pemisahan satu per satu. Gergaji potong melintang: 4 buah gergaji bundar yang dapat disetel samping. Penampang potong: 180 x 220 mm, 150 x 300 mm. Satu operator sudah cukup. Lhodpfxjvbtpo Aahjr

Kondisi: baru, Tahun pembuatan: 2023, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 10006565, Weinig Powermat 1500 Working width: 30 - 310 mm (with tool flying circle 93-125 mm) Working height: 100 - 200 mm (with tool flying circle 93-125 mm) Number of spindles: 6 Bottom spindles: 2 Right spindles: 1 Left spindles: 1 Top spindles: 2 Spindle arrangement: bottom-right-left-top-top-bottom Lhjdpfsrq Ebfex Aahsr Maximum spindle speed: 8,000 rpm Spindle diameter: 40 mm Powerlock tool holder Including beveling unit Separate motor for each spindle Electronic feed including brake, steplessly adjustable 5-40 m/min Durofer pointed-tooth feed rollers Short infeed table, 1.2 m long, with 2 powered rollers above the table Machine table surface with hard coating Manual lubricant pump WEINIG Comfort Set Control system: WEINIG MEMORY PLUS-SYSTEM CE marking Declaration of conformity

Tahun pembuatan: 2011, Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, Finger jointing line for cross-sections up to 200 cm² (80/240 mm or 100/200 mm), including the following components: 1. HOWIAL Tilt Destacking System - SH/4t - 1.75x1.75x6.00m - 4t – shortest length 2.50 m, semi-automatic package separation. For tilting the timber stack up to 45°. Electro-motor drive. Max. stack dimensions 1.75 x 1.75 x 6.00 m. Max. stack weight 4 t. Shortest timber length 2.5 m. 2. HOWIAL Lamella Separator VE 1 to crosscut saw. With pneumatically controlled tongues, on which material marked for defects is placed onto the underlying roller conveyor. 3. HOWIAL Grading Roller Conveyor RO-1 Digital wood moisture measuring, control and recording system for automatic acquisition and control of wood moisture using the impulse measuring method based on the electrical resistance principle. 4. Gann DMT-8 Digital wood moisture measuring, control, and recording system for automatic acquisition and control of wood moisture by impulse measuring based on the electric resistance principle. System installed in a large control cabinet, complete with inkjet printer. 5. HOWIAL Crosscut Saw AS-30 B Pneumatically controlled under-table crosscut saw with 2 automatic feed units, automatic crosscutting. Special photo cell control for detection of fluorescent line marking. Automatic waste detection possible. Saw motor power 7.5 kW Saw blade diameter 700 mm Feed drive approx. 2 x 1.5 kW Air pressure 8 bar Max. feed speed approx. 60 m/min 6. HOWIAL Belt Conveyor for cutoff waste, with profiled belt and guide plates Belt width 350 mm Belt length 2000 mm Belt speed 0.4 m/s 7. HOWIAL Double Roller Conveyor RO-2, 6.00 m long Incl. transverse transport, conveyance to finger jointing system. Powered by round belt, all rollers driven. Cross-transfer chain conveyor. Eject ± moisture right, transport speed adjustable up to 100 m/min. Length approx. 6.00 m Roller width approx. 400 mm Diameter 112 mm 8. Compact Finger Jointing Machine Cook Bolinder The technical data are original from Cook Bolinder: Wood width from 75 to 245 mm Wood thickness from 20 to 105 mm Input lengths from 1 m to 6 m Cross-sections from 30 cm² to 200 cm² Pressing force 5 - 22 tons Spindle diameter 50 mm Finger joint profile 15/15 Spindle speed approx. 6000 rpm Total electrical connected load approx. 62 kW Machine weight approx. 9 tons Gluing: OEST comb system for PU Modern Telemechanique PLC control. 9. HOWIAL Roller Conveyor with Destacking Powered roller conveyor with automatic ejector and hydraulically driven destacking arms. Technical Data: Lhodpji Ezx Djfx Aahjr Height: 920 mm Length: approx. 12,000 mm 10. Safety fence panels including safety switches 11. Finger Joint Testing Machine BSPLT-100 Testing machine for finger joint bend test according to DIN 1052-1/A1 and EN 385. Bearing distances freely adjustable, mounted measurement scale, automatic calculation of support distances in the software. Fully automatic test sequence by mouse click via PC (PC not included). Alternatively, the test process can be operated via front panel keys. Connection to any standard PC or laptop (Win 2000/XP) via supplied RS232 serial cable. Fully automatic data acquisition and protocol generation in MS Excel with graphical representation. Max. wood width: 300 mm Max. wood thickness: 140 mm Max. pressing force: < 100 kN Max. support length: 2100 mm Measuring accuracy WITHOUT DISMANTLING

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2002, EDIMC 1200-500/42-25/22-16 model Table size: 4200 x 2500 x 650 mm The table extends 3000 mm outward for loading For tools up to 4200 x 2500 x 1500 mm Tool weight up to 40 T Speed at 700 T still 62 mm/second, at 1200 T still 35 mm/second The ram (slide) measures 4200 x 1750 mm Maximum open height: 2200 mm Die cushion force: 50 to 500 T Die cushion stroke: 400 mm Die cushion size: 3100 x 1600 mm Die cushion speed: 150 mm/second Ram-mounted draw cushion with 150 mm stroke 1600 mm stroke Ledpjgphaxsfx Aahshr 475 kW, 890 Amps 210 T machine weight New motors New control system The machine was used for 3 years at a German automotive company, then sold to an auto parts manufacturer in Brazil. Operated there until 2020.

Tahun pembuatan: 2016, Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, de-AT Lsdpfx Asvbcbusahshr