Platform kerja yang diartikulasikan

Manitou 160 ATJ+

Kondisi: bekas, Tahun pembuatan: 2024, panjang total: 7.060 mm, · Working height: 16.21 m · Ground clearance (access): 0.38 m · Platform height: 14.21 m · Maximum lateral outreach: 8.52 m · Articulation point / boom overhang: 7.59 m · Basket jib rotation angle (up / down): +66.50° / -65.80° · Basket load capacity Q: 408 kg · Upper carriage rotation: 350° · Basket rotation (right / left): 90° / 90° · Maximum personnel (indoor / outdoor): 3 / 3 · Inside turning radius: 1.28 m · Outside turning radius: 4.09 m · Travel speed – transport mode: 5 km/h · Travel speed – work mode: 1 km/h · Gradeability: 45% · Permissible inclination in work mode: 5° · Foam-filled tyres · Tire size: 914 x 370 mm · Drive wheels (front / rear): 2 / 2 · Steering wheels (front / rear): 2 / 2 Kedpfxoxd D U Re Aahsfa · Braked wheels: 0 / 2 · Manufacturer / Engine model: Kubota - D1105-E4B · Emission standard: Stage V · Rated engine output / Power: 24.80 Hp / 18.50 kW · Ground pressure: 11.50 dan/cm² · Hydraulic pressure: 340 bar · Hydraulic tank capacity: 53 l · Fuel tank capacity: 51 l · Ambient noise level (LwA): < 105 dB · Vibration exposure hand/arm: < 0.50 m/s² · Daily consumption: 7 l · Harmful NOx emissions: 5.80 kg

Kondisi: bekas, System: Inclined Clarifier, Lamella Clarifier, Lamella Separator Condition: Used, up to 120 m³/h depending on medium Design: Robust, high-performance construction Material: Stainless steel on container frame, 30' container, scraper plates in PP (polypropylene) Dimensions (LxWxH): 7580 x 2435 x 3000 mm Weight: approx. 8,000 kg Principle: Wastewater is fed into the inlet of the inclined clarifier and flows downward. Due to the arrangement of the lamella plates in the clarifier, the wastewater is redirected underneath the plates and flows upward through the lamellas. As a result, solids settle down onto the lamella plates. The clarified water is transported to the outlet. Solids on the lamella plates gradually slide down along the plates, where the sludge hopper is located. Rake Mechanism: Optionally, we offer the inclined clarifier with a rake mechanism to keep the sludge fluid. Application: Separation of solids and liquids by sedimentation. Inclined clarifiers are often used as a pre-stage before filter presses or decanters for thickening. Pre-thickening of thin sludge allows the filter press to be sized smaller in terms of filter area. The system is in good condition and available for rent or sale. Inspection at our plant is possible by appointment. We also offer new inclined clarifiers with a delivery time of approximately 8 to 10 weeks! Kodpfxjppyhtj Aahofa

Kondisi: baru, Tahun pembuatan: 2025, jam operasional: 4 h, daya: 16 kW (21,75 hp), tinggi angkat: 14.260 mm, jenis bahan bakar: listrik, warna: lain, AG-2025-FR-KA-408 Kfsdpfxox Izu So Aahoa

Kondisi: bekas, Tahun pembuatan: 2007, jam operasional: 5.490 h, kapasitas angkut: 3.500 kg, tinggi angkat: 16.250 mm, jenis bahan bakar: diesel, warna: merah, Tahun pembuatan: 2007 Berat kosong: 7.450 kg Berat total yang diizinkan: 10.950 kg Ksdpox Hgm Rsfx Aahjfa Dimensi (P x L x T): 390 x 181 x 192 cm Tiang: lengan artikulasi Tinggi kerja: 1.625 cm

Kondisi: bekas, jarak tempuh: 53.318 km, tinggi angkat: 110.000 mm, Tahun pembuatan: 2018, Drive: Wheel Unladen weight: 60,000 kg Lifting capacity: 250,000 kg Serial number: 088666 Front tire condition: 90% Rear tire condition: 90% Transport dimensions (L x W x H): 15.86 x 2.99 x 3.99 m Please contact PFEIFER GROUP for further information. Kfsdpfjwz Ut Iex Aahsa

Kondisi: baru, Tahun pembuatan: 2024, jam operasional: 10 h, konfigurasi gandar: 4x4, jenis bahan bakar: listrik, Perlengkapan: penggerak semua roda, de2-1 Kfedowui Srepfx Aahoa

Kondisi: bekas, Tahun pembuatan: 2012, jam operasional: 4.059 h, nomor mesin/kendaraan: 901185, jenis bahan bakar: diesel, Berat kosong: 7.450 kg Tiang: lengan artikulasi Ksdpjxkr Ufofx Aahjfa Kapasitas angkat: 230 kg Tinggi kerja: 1.600 cm Kondisi ban depan: 60% Kondisi ban belakang: 60% Jangkauan horizontal maks.: 830 m Dimensi transportasi (P x L x T): 7,03 x 2,3 x 2,37 m Silakan hubungi PFEIFER GROUP untuk informasi lebih lanjut.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2024, Technical Data: Sheet Length 4,100 mm Sheet Thickness 6 mm Distance Between Uprights - mm Total Power Requirement 15 kW Weight approx. 11,500 kg Dimensions (LxWxH) 5,250 x 2,300 x 2,150 mm Backgauge 1,000 mm D-Touch 7 Touchscreen CNC Control, user-friendly central cutting angle adjustment Ball screw spindle, 1,000 mm & automatic swiveling Support balls in the table for improved material handling Kfjdpfx Ajh Ib T Ujahoa Side gauge with scale, T-slot, and tilting stop Support arms with T-slot and tilting stop Cutting line illumination & 1 m foldable finger guard High-performance hydraulic and electronic components Automatic pressure adjustment Swiveling backgauge Cutting line illumination Foot pedal CE standard for EU The machines can be viewed and demonstrated at any time at our demonstration center in Staufenberg, by prior appointment. Additional machines are available for demonstration at our premises in Staufenberg. Further information is available upon request.

Kondisi: bekas, Tahun pembuatan: 2024, panjang total: 7.010 mm, Working height: 16.21 m Ground clearance (access): 0.38 m Platform height: 14.21 m Maximum horizontal outreach: 8.52 m Articulation / jibe point: 7.59 m Platform jib arm rotation (up/down): +66.50° / -65.80° Basket load capacity: 408 kg Upper structure rotation: 350° Platform rotation (right/left): 90° / 90° Permitted number of persons (indoor/outdoor): 3 / 3 Machine weight: 7,500 kg Platform basket dimensions (L x W): 2.30 m x 0.90 m Overall length: 7.09 m Overall width: 2.45 m Overall height: 2.47 m Stowed length: 4.89 m Kfodpfxox Avvqj Aahea Stowed height: 2.94 m Counterweight offset (superstructure at 90°): 0.15 m Outside turning radius: 4.09 m Ground clearance (middle wheelbase): 0.40 m Wheelbase: 2.20 m Travel speed – transport mode: 5 km/h Travel speed – work mode: 1 km/h Gradeability: 45% Permitted tilt in work mode: 5° Tyres: Foam-filled Tyre size: 914 x 370 mm Drive wheels (front/rear): 2 / 2 Steering wheels (front/rear): 2 / 2 Braked wheels / wheels: 0 / 2 Manufacturer / engine model: Kubota - D1105-E4B Emission standard: Stage V Rated engine output / power: 24.80 hp / 18.50 kW Ground pressure: 11.50 daN/cm² Hydraulic pressure: 340 bar Hydraulic tank capacity: 53 l Fuel tank capacity: 51 l Environmental noise (LwA): < 105 dB Hand/arm vibration exposure: < 0.50 m/s² Daily consumption: 7 l

Kondisi: bekas, Tahun pembuatan: 2007, jam operasional: 5.370 h, kapasitas angkut: 430 kg, tinggi angkat: 16.000 mm, jenis bahan bakar: diesel, Tahun produksi: 2007 Kodjx Hglmjpfx Aahsfa Berat kosong: 7.450 kg Berat kotor maksimum: 7.880 kg Dimensi (P x L x T): 390 x 181 x 192 cm Tiang: Lengan engsel Tinggi kerja: 1.625 cm

Kondisi: bekas, Tahun pembuatan: 2015, jam operasional: 2.434 h, nomor mesin/kendaraan: 0300212166, konfigurasi gandar: 4x4, jenis bahan bakar: diesel, Perlengkapan: penggerak semua roda, 502e42c8-4f82-4475-bef0-e3a5470e52f0 Kfjdotr Itbepfx Aahea

Kondisi: baru, Tahun pembuatan: 2024, jam operasional: 5 h, konfigurasi gandar: 4x4, jenis bahan bakar: listrik, Perlengkapan: penggerak semua roda, dk001 Kfsdpfx Aaswui S Eshoa

Kondisi: bekas, Tahun pembuatan: 2024, panjang total: 6.680 mm, · Working height: 16.02 m · Platform height: 14.02 m · Maximum lateral outreach: 8.30 m · Articulation/jib pivot point: 7.50 m · Basket arm rotation angle (up / down): +65° / -59.50° · Work basket load capacity: 230 kg · Upper structure rotation: 350° · Basket rotation (right / left): 90° / 90° · Permitted number of occupants (inside / outside): 2 / 2 · Platform weight: 6160 kg · Counterweight offset (upper structure at 90°): 0.22 m · Counterweight dimension / outreach: 0.22 m · Outer turning radius: 3.75 m · Travel speed – transport mode: 5 km/h · Travel speed – work mode: 1 km/h · Gradeability: 45 % · Permitted inclination in work mode: 5° · Tyres: foam-filled · Tyre size: 834 x 298 mm · Drive wheels (front / rear): 2 / 2 · Steerable wheels (front / rear): 2 / 2 · Braked wheels / axles: 0 / 2 Kodjxd Etbepfx Aahofa · Manufacturer / engine model: Kubota - D1105-E4B · Engine rating: Interim Tier 4, Stage IIIA, Stage V · Nominal engine output / power: 24.50 Hp / 18.50 kW · Ground pressure: 11.60 daN/cm² · Hydraulic system pressure: 340 bar · Hydraulic tank capacity: 54 l · Fuel tank capacity: 52 l · Sound pressure at basket: 105 dB · Environmental noise (LwA): < 105 dB · Daily consumption: 4.08 l

Kondisi: baru, Tahun pembuatan: 2025, Fungsionalitas: berfungsi sepenuhnya, daya: 55,4 kW (75,32 hp), berat keseluruhan: 2.050 kg, jenis bahan bakar: diesel, warna: original, konfigurasi gandar: 1 as, berat operasi: 2.050 kg, berat kosong: 2.050 kg, bahan bakar: diesel, Technical Data: Round timber up to 24 cm Feed width: 300 mm Base weight approx. 2,050 kg Year of manufacture: 2022 Kodpjv Evx Uofx Aahjfa 4-cylinder Hatz turbo-diesel engine With common rail technology and diesel particulate filter Complies with EURO 5 emissions standard. Mounted on a single-axle chassis for 80 km/h Power Control System Water-cooled 4‑cyl. Hatz turbo-diesel engine 55 kW (74.8 hp) with common-rail technology and DPF Fully galvanized single-axle chassis (80 km/h) Drawbar with overrun brake Front jockey wheel Rear support stand Lighting according to German Road Traffic Licensing Regulations (StVZO), impact-protected Heavy-duty tires 205/65 R17.5 (EX) Hydraulic adjustment of feed speed, thus controlling chip size Chipper knives can be re-sharpened several times (approx. 10x) for long service life PowerGrip feed roller, 300 mm wide, with hydraulic feed Especially grippy, aggressive and consistent feed: each roller has its own hydraulic motor Discharge chute with adjustable deflector, swivelable Discharge chute mounted on ball-bearing slewing ring Relevant machine parts soundproofed Features: Engine and Chassis: Water-cooled, Stage V 4-cylinder Hatz Common Rail turbo-diesel engine with DPF, delivering 55.4 kW (75.3 hp). Automatic industrial overrunning clutch between engine and chipper disc, protecting engine, bearings, and shaft. Fully galvanized, corrosion-resistant single-axle chassis for speeds up to 80 km/h with TÜV approval. Robust, fixed steel mudguards. Provision for front jockey wheel and rear support stand. Height-adjustable drawbar with overrun brake and soft-dock ball coupling or DIN towing eye. Lighting system per StVZO with impact-protected components. Heavy-duty tires 205/65 R17.5. Fuel level indicator for easy monitoring. EU type approval (homologation). Housing/Hopper/Discharge Chute: Rotatable chipper housing with adjustable feed angle up to 270°. Folding feed hopper with minimum feed depth 1,500 mm. Fully galvanized hopper flap for durability. Hopper dimensions (internal): Width = 1,160 mm, Height = 1,040 mm. Swivelable discharge chute with adjustable deflector. Discharge chute on ball-bearing slewing ring for flexible positioning. Sound insulation on relevant machine parts such as chipper hood and discharge chute. Emergency stop button on top of hopper and on the side of the hopper flap. Chipping Unit: Safety system in accordance with EN 13525. Chipper disc diameter Ø 800 mm, thickness 40 mm. Closed knife system for quick and safe knife changes. Continuously adjustable chipper knives, can be resharpened multiple times for extended service life. Horizontal counter blade can be used 4 times and vertical shear bar 2 times for long service life. Wrap protection at the main bearing of the chipper disc. Hydraulic Feed: Feed control with independent hydraulic circuit. PowerGrip feed roller (300 mm wide) with hydraulic feed for grippy and consistent material transport. Parallel guide of the upper roller for even feed without misalignment. Hydraulic adjustment of feed speed to control chip size. Hydraulic oil tank level indicator.

Kondisi: bekas, Tahun pembuatan: 2024, panjang total: 7.090 mm, · Working height: 16.21 m · Ground clearance (access): 0.38 m · Platform height: 14.21 m · Maximum lateral outreach: 8.52 m · Articulation point / boom overhang: 7.59 m Kfodpfx Aaexd Ex Dehea · Basket jib rotation angle (up / down): +66.50° / -65.80° · Basket load capacity Q: 408 kg · Upper carriage rotation: 350° · Basket rotation (right / left): 90° / 90° · Maximum personnel (indoor / outdoor): 3 / 3 · Inside turning radius: 1.28 m · Outside turning radius: 4.09 m · Travel speed – transport mode: 5 km/h · Travel speed – work mode: 1 km/h · Gradeability: 45% · Permissible inclination in work mode: 5° · Foam-filled tyres · Tire size: 914 x 370 mm · Drive wheels (front / rear): 2 / 2 · Steering wheels (front / rear): 2 / 2 · Braked wheels: 0 / 2 · Manufacturer / Engine model: Kubota - D1105-E4B · Emission standard: Stage V · Rated engine output / Power: 24.80 Hp / 18.50 kW · Ground pressure: 11.50 dan/cm² · Hydraulic pressure: 340 bar · Hydraulic tank capacity: 53 l · Fuel tank capacity: 51 l · Ambient noise level (LwA): < 105 dB · Vibration exposure hand/arm: < 0.50 m/s² · Daily consumption: 7 l · Harmful NOx emissions: 5.80 kg