Pusat permesinan - universal

MAP LPZ500

Kondisi: bekas, Tahun pembuatan: 2015, tinggi total: 5.000 mm, panjang total: 9.000 mm, lebar total: 6.000 mm, berat keseluruhan: 85.000 kg, Tahun Pembuatan: 2015 Nomor Mesin: 12300000163 Pengendali Heidenhain iTNC 530 HSCI (Pengendali Lintasan 3D) Rentang Pergerakan X: 2.700 mm Y: 2.700 mm Z: 1.600 mm Sumbu B: Kepala frais putar universal yang dikendalikan Sumbu C: Meja putar NC Ø 2.200 mm Pengerjaan simultan 5 sumbu Spindel Spindel motor SK50 Kecepatan: 20–12.000 rpm Daya: 44 kW (40% ED) / 32 kW (100% ED) Pemasangan Alat: SK50 sesuai DIN 69871 Pengubah Alat Majalah radial 63 posisi Gagang ganda Perlengkapan IKZ 40 bar Konveyor serpihan Roda tangan elektronik Layar pengintai yang berputar Pelumasan jumlah minimal (MMS) Sistem penyemprotan pendingin melalui spindel Tangki pendingin 980 l Paket untuk pembuatan cetakan Ndedpjzqxkmsfx Afvea Penekan getaran aktif (ACC) Pengaturan umpan adaptif (AFC) Pemisah kabut oli/emulsi Paket Smartkey Layar pengintai keselamatan tambahan (Visiport) Mode operasi 4 (Pengamatan proses) Dimensi (P x L x T) kira-kira: 9000 x 6000 x 5000 mm Berat kira-kira: 85.000 kg Tahun Pembuatan: 2.015 Kondisi: berfungsi Ketentuan Pembayaran: 100% uang muka sebelum pengambilan Ketentuan Pengiriman: EXW dari pabrik Beroperasi dengan listrik: Tidak

Tahun pembuatan: 2002, Kondisi: baik (bekas), Manufacturer: Matsuura Model: LX-O Control: YASNAC Year of manufacture: 2002 Specifications Metric US Standard X-axis travel: 330 mm Y-axis travel: 300 mm Nodpfxolz Rvle Afvjda Z-axis travel: 250 mm Table length: 540 mm Table width: 320 mm Table load capacity: 100 kg Feed rate X-axis: 90,000 mm/min Feed rate Y-axis: 90,000 mm/min Feed rate Z-axis: 90,000 mm/min Tool holder: ISO 30 / BT / MK Spindle power: 7.5 kW Spindle speed: 40,000 rpm Tool changer: 30 positions Chip conveyor: Yes Dimensions (approximate) Length: 2,800 mm Width: 2,600 mm Height: 2,800 mm Please note: The information on this page has been provided to the best of our knowledge and, where possible, obtained from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Therefore, no representations or contractual terms are implied. We recommend verifying all important details.

Kondisi: bekas, Tahun pembuatan: 2013, x-perjalanan 400 mm y-perjalanan 400 mm z-perjalanan 375 mm Berat mesin sekitar 7150 kg Sumbu B: -5° hingga +110°, Sumbu C: 360° Nedpfxoy Nd U Rs Afvsda

Tahun pembuatan: 2006, Kondisi: baik (bekas), Fully equipped 5-axis vertical machining center with direct-drive technology. Machine fitted with a 30,000 rpm spindle, 60-position tool magazine, and Heidenhain TNC 530 CNC. Nsdpjpkyn Refx Afvoda

Kondisi: bekas, Tahun pembuatan: 2011, tech-de-hu-001 Nsdpfjx R Em Djx Afvoda

Tahun pembuatan: 1998, Kondisi: siap digunakan (bekas), Base machine CTX 200E with driven tools, C-axis, and 1x sub-spindle machining. Includes DATAPILOT software package TurnPlus, control cabinet cooling unit, hinged belt chip conveyor, discharge height: 1100 mm including coolant tank, set of tool holders for the universal disc turret with tool holders for external machining, boring bar holders, tools with cylindrical shank interface, sealing plugs, reduction sleeves. Complete axial bar gripper, workpiece pick-up unit, 3x axial tool spindles for drilling/milling/tapping, 1x radial spindle for drilling/milling/tapping, 1x for saw blades, complete collet chuck for main spindle, complete collet chuck for sub-spindle, 17x round DIN collets 173E, Ø 3–40 mm, 2x hex DIN collets 173E, SW 7 and 12 mm, 2x square DIN collets 173E, SW 8 mm. Bar feeder magazine IEMCA BOSS 542/32, guide channel set LW 13, additionally for IEMCA BOSS 542, 13x guide jaws for bar feeder IEMCA BOSS 542/32, Ø 8–41 mm. Complete documentation included. The machine has been idle for one year as the turret head is missing; no further defects known, operating hours unknown, no maintenance records available. Includes bar loader and numerous tools. Ndjdpfx Aew Tl Ifsfvja

Kondisi: bekas, Tahun pembuatan: 2005, Turning diameter 275 mm Turning length 900 mm Control system: TRAUB TX8i Spindle bore 65 mm Drive power 100% duty cycle: 25.20 kW Drive power 40% duty cycle: 30.20 kW Torque at 40% / 100% duty cycle: 180 / 135 Nm Spindle speeds – stepless: 1 – 5,000 rpm Spindle diameter (front bearing): 110 mm C-axis: 1 – 500 rpm Tool turret No. 1 X-axis: 290 mm Y-axis: 165 mm Z-axis: 600/950 mm B-axis: 360° Rapid traverse X/Y/Z: 18 / 18 / 30 m/min Feed force X/Y/Z: 10 / 10 / 7 kN Number of tools: 2x2 + 2x2 Number of driven tools: 2x2 + 2x2 mm Tool speeds: 8,000 / 2,000 rpm Drive power 25% duty cycle: 5.80 kW Torque at 25% duty cycle: 4x18.6 / 4x74 Nm Tool holder: TRAUB Ø60 Tool turret No. 2 / No. 3 / No. 4 X-axis: 170 mm Z-axis: 600/950 mm Y-axis: +/- 60 mm Rapid traverse X/Y/Z: 18 / 15 / 30 m/min Feed force X/Y/Z: 10 / 10 / 7 kN Tool turret – number of stations: 10 Ndedpfxsw E Nnbe Afvsa Number of driven tools: 10 mm Tool speeds: 1 – 6,000 rpm Drive power 25% duty cycle: 5.80 kW Torque at 25% duty cycle: 18.60 Nm Tool holder: DIN 69880 Ø40x63 Bar feeder DNH61 / 3000 Bar lengths: 1,000 – 3,200 mm Bar diameter: 18 – 63 mm Max. hexagon across flats: 45 mm Total power requirement: 95.00 kW Machine weight approx. 16.00 t Space required approx. 10.00 x 3.50 x H3.00 m Equipped with control system TRAUB TX 8i, main and counter spindle with C-axis, 3 pcs. turret tool holders, 1 pc. vertical tool holder with B-axis, extraction system, chip conveyor, coolant system with coalescence separator. Bar loader TRAUB Stamag DNH61 / 3000 2 pcs. 3-jaw chucks SMW KNCS-N 170-43 2 pcs. HAINBUCH Spanntop collet chucks 40 pcs. various tool holders, non-driven 6 pcs. various driven tool holders Spare parts package Machine can be inspected under power.

Kondisi: baik (bekas), Tahun pembuatan: 2003, panjang pembubutan: 1.505 mm, Turning and Milling Center GILDEMEISTER GMX 400 linear Year of manufacture: 2003 Control system: Sinumerik Power line Technical Specifications: Ndedpfxjwzbq To Afvea Main spindle ISM 90 drive power: 36/45 kW (100/40%) Main spindle speed: Main spindle torque: Bar capacity: 90 mm Magazine capacity: 120 slots Milling spindle tool holder: HSK 63 Counter spindle ISM 90 drive power: 36/45 kW (100/40%) Counter spindle speed: Counter spindle torque: Bar capacity: 90 mm B-axis / Milling spindle: Drive power: Speed: Torque: Tool holder: HSK z3 Lower turret: X-axis: Z-axis: Speed for driven tools: Number of turret stations: 12 Tool holder: VDI 40 Equipment: - Chip conveyor - High-pressure system with 20 bar - Preparation for 3D touch probe - Tailstock function for counter spindle - Automatic sliding doors

Kondisi: bekas, Tahun pembuatan: 2002, Max. turning diameter: 420 mm Turning length: 1,250 mm CNC Control: INDEX, C 200-4 D Swing diameter: 630 mm Travel X1: 320 mm Travel Z1: 1,250 mm Travel X2: 170 mm Travel Z2: 1,250 mm Travel X3: 320 mm Ndjdpst U R Hzsfx Afvoa Travel Z3: 1,250 mm Max. main spindle speed: 3,000 rpm Main spindle drive: 53 kW Spindle bore: 102 mm Spindle nose: DIN 55026 size 11 Spindle torque: 675 Nm Counter spindle - max. spindle speed: 3,000 rpm Counter spindle drive: 53 kW Counter spindle - spindle bore: 102 mm Counter spindle - spindle nose: DIN 55026 size 11 Counter spindle - torque: 675 Nm Counter spindle travel: 1,250 mm Feed force X1: 14,000 N / Z1: 14,000 N Rapid traverse X1: 20 m/min / Z1: 40 m/min Feed force X2: 8,600 N / Z2: 14,000 N Rapid traverse X2: 20 m/min / Z2: 40 m/min Feed force X3: 14,000 N / Z3: 14,000 N Rapid traverse X3: 20 m/min / Z3: 40 m/min Number of turret positions, Turret 1 = 12 Number of turret positions, Turret 2 = 10 Number of turret positions, Turret 3 = 12 Number of driven tool stations: 12 / 10 / 12 Max. driven tool speed: 6,000 rpm Torque (driven tools): 36 / 21 / 36 Nm Tool shank DIN 69880 Tool holder Ø 40 x 63 mm Total connected load: 120 kW Machine weight approx.: 19 t Machine dimensions (L x W x H): 5.77 x 2.47 x 2.62 m Accessories: - HAINBUCH segmented collet chuck on main spindle - HAINBUCH collet chuck, SPANNTOP SP on counter spindle - Various tool holders (including for driven tools) - Chip conveyor - Coolant system Note: All three tool turrets are prepared for through-tool coolant (IKZ), however, the high-pressure system is not included with the machine.

Kondisi: baik (bekas), Werkzeughalter VDI 30 Nodpeww Hlusfx Afvsda