Pusat pembubutan dan penggilingan CNC

TRAUB TNX65

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2012, jam operasional: 6.542 h, daya motor spindle: 24.000 W, kecepatan spindel (maks.): 5.000 rpm, berat keseluruhan: 9.500 kg, jumlah sumbu: 11, TRAUB TNX 65/42 dari seri 11s ini diproduksi pada tahun 2012. Mesin ini memiliki diameter putar maksimum 175 mm dan panjang putar 650 mm. Mesin ini dilengkapi dengan kecepatan spindel utama yang kuat hingga 5.000 RPM dan kecepatan spindel kedua hingga 7.000 RPM. Jika Anda mencari fungsi pembubutan dan pemesinan berkualitas tinggi, Anda dapat mempertimbangkan pusat pembubutan dan pemesinan TRAUB TNX 65/42 yang kami tawarkan untuk dijual. Hubungi kami untuk informasi lebih lanjut. • Jam operasi: 26.946 jam • Diameter putar maks.: 175 mm • Panjang putar maks.: 650 mm • Kapasitas batang/lubang spindel utama: 65 mm • Momen putar spindel maks.: 275 Nm • Kecepatan spindel kedua: hingga 7.000 RPM • Diameter pemasangan spindel kedua: 42 mm Knsdsz Dk Riopfx Al Sjb • Turret perkakas: 3 × 10 posisi • Kecepatan cepat sumbu X: 30 m/menit • Kecepatan cepat sumbu Z: 40 m/menit • Daya nominal: 83 kW • Daya terhubung: 68 kVA • Catu daya: 400 V, 3~, N, PE, 50 Hz • Arus nominal: 134 A Spesifikasi Teknis Spindel kedua: Ya Perkakas yang digerakkan: Ya

Kondisi: baru, Tahun pembuatan: 2024, Fungsionalitas: berfungsi sepenuhnya, tekanan: 16 batang, frekuensi input: 50 Hz, jenis arus masuk: tiga fasa, suhu: 400 °C, tegangan masuk: 6.000 V, kecepatan rotasi (min.): 1.500 rpm, kecepatan rotasi (maks.): 1.500 rpm, jenis pendinginan: udara, Industrial steam turbogenerator Howden – model KK&K TWIN CA46, NEW, never installed and never commissioned, still under manufacturer’s warranty. Following a revision of long-term industrial strategy, a Howden KK&K TWIN CA46 steam turbogenerator is available for sale, complete according to original OEM supply. The machine is NEW, entirely manufactured and tested at OEM level, but never installed or put into service. It is still covered by the manufacturer’s warranty and is stored in an indoor, climate-controlled environment. Immediate availability eliminates standard production lead times, which for this type of equipment are generally 24–36 months. Main supply: - Steam turbine on skid with integrated gearbox - Synchronous generator supplied separately Turbine technical configuration: - Model: KK&K TWIN CA46 - Dual-casing turbine (Steam Part A + Steam Part B) - Integrated 3-shaft gearbox (2 pinions + central wheel) - Controlled steam extraction between HP and LP section (included) Main design conditions: - Inlet steam pressure (HP): 16 bar(a) - Inlet steam temperature: 400 °C - Electrical power at terminals: up to 1,595 kW - Nominal speed: 1,500 rpm Electric generator: - Three-phase synchronous generator Knsdpfxoyidvde Al Seb - Rated power: 1,994 kVA - Voltage: 6 kV – Frequency: 50 Hz - Cooling: IC31, air - Brushless execution, suitable for parallel operation with the grid Included systems: - Integrated oil system within the base frame - Main mechanical oil pump and auxiliary electric pump - Local panel on skid - Control and protection panel with Siemens SIPROTEC 5 system - Electronic speed and pressure governor - Independent overspeed protection device - Turbogenerator simulation model ENC-RfG Typical applications: - Industrial cogeneration (CHP) plants - Energy recovery from process steam - Biomass and waste-to-energy plants - Combined production of electricity and service steam Condition and status: - Condition: NEW - Year of manufacture: end of 2024 - Never installed – never commissioned - Still covered by manufacturer’s warranty - Complete OEM technical documentation available - Option of installation and commissioning with manufacturer’s support Possible application fields: - Biomass and waste-to-energy plants for the production of electricity and service steam, with immediate unit availability and without multi-year manufacturing lead times - Industrial cogeneration (CHP) in plants with continuous process steam demand (paper, food, chemical, manufacturing industries) - Revamping / repowering of existing plants as a rapid alternative to new OEM supply with 24–36 month lead times Price: on request. Further technical information and documentation available upon request.

Kondisi: bekas, Tahun pembuatan: 2007, Diameter putaran 275 mm Panjang putaran 900 mm Pengendali TRAUB TX8i-s Diameter spindel 65 mm Knsdpfszwg Ndjx Al Seb Kecepatan putaran spindel – variabel 1 – 5.000 putaran/menit Diameter spindel di bantalan depan 110 mm Sumbu C 1 – 500 putaran/menit Sumbu x 175 mm Sumbu z 650/975 mm Sumbu y +/- 40 mm Kecepatan gerakan cepat X/Y/Z 20 / 40 / 20 m/menit Gaya umpan X/Y/Z 5,5 / 5,5 / 10 kN Revolver perkakas – jumlah stasiun 10 Jumlah perkakas yang digerakkan 10 mm Kecepatan putaran perkakas 1 – 6.000 putaran/menit Daya penggerak 25% ED 5,50 kW Torsi pada 25% ED 17,50 Nm Penyangga perkakas DIN 69880 Ø30x55 Diameter spindel di bantalan depan 110 mm Total kebutuhan daya 95,00 kW Berat mesin sekitar 16,00 t Kebutuhan ruang sekitar 10,00 x 3,50 x T3,00 m

Kondisi: bekas, Tahun pembuatan: 2011, produsen pengendali: Mitsubishi, model controller: TX8i-s, _____ Deskripsi: Spindel utama: Teknologi: Spindel motor Kecepatan putar: 5.000 RPM Daya: 22,6 kW Torsi: 180 Nm Diameter lubang batang: 65 mm Pegang benda kerja: Collet chuck, Hainbuch Spanntop Kombi Axfix Ukuran 65 Spindel penyeimbang: Teknologi: Spindel motor Kecepatan putar: 5.000 RPM Daya: 22,6 kW Torsi: 180 Nm Pegang benda kerja: Collet chuck, Hainbuch Spanntop Kombi Axfix Ukuran 65 Pengeluaran: Hidraulik dengan pembilasan Pembawa alat I (X/Y/Z): Teknologi: Turret dengan 10 stasiun Pegang alat: VDI30 Penggerak alat: 6.000 RPM, 5,5 kW, 17,5 Nm Jarak perjalanan di X/Y/Z: 175/80/650 mm Kecepatan cepat di X/Y/Z: 20/20/40 m/menit Pembawa alat II (X/Y/Z): Teknologi: Turret dengan 10 stasiun Pegang alat: VDI30 Penggerak alat: 6.000 RPM, 5,5 kW, 17,5 Nm Jarak perjalanan di X/Y/Z: 175/80/650 mm Knjdjzr Dd Ujpfx Al Seb Kecepatan cepat di X/Y/Z: 20/20/40 m/menit Pembawa alat III (X/Y/Z): Teknologi: Turret dengan 10 stasiun Pegang alat: VDI30 Penggerak alat: 6.000 RPM, 5,5 kW, 17,5 Nm Jarak perjalanan di X/Y/Z: 175/80/650 mm Kecepatan cepat di X/Y/Z: 20/20/40 m/menit Peralatan/Aksesori: Pengelolaan serpihan: Konveyor serpihan Pengelolaan cairan pendingin: Sistem IKZ dengan filter pita kertas dan tekanan tinggi, 80 bar Pengaturan suhu cairan pendingin: Persiapan untuk pendingin eksternal, Deltatherm Pengumpanan bahan baku: Pengumpan batang pendek, FMB SL 80S Pengeluaran produk jadi: Sistem pengambilan portal (dikendalikan NC) dengan ban berjalan Penyedot kabut oli: Pemisah elektrostatik, LTA AC3001 Aksesori lainnya: Berbagai alat penahan alat yang digunakan

Kondisi: bekas, Putar di atas penopang 400 mm Putar di atas kereta 350 mm Jarak antara centers 610 mm Gerakan panjang maksimum 560 mm Gerakan lintang maksimum 40+120 mm Kecepatan spindle 40-4000 rpm Diameter lubang spindle 52 mm Revolver dengan 12 stasiun Kontrol: Kjdpfx Ajxg Nd Ajl Sonb Fanuc 6T Dilengkapi dengan: Lihat foto

Kondisi: bekas, TECHNICAL DATA - Number of spindles: 2 - Number of axes: 12 - Number of turret heads: 3 MAIN SPINDLE - Spindle nose: A2-6 - Spindle drive power: 24 kW - Spindle speed: 5,000 rpm - Max. bar diameter: 65 mm - Max. main chuck diameter: 175 mm - Minimum C-axis resolution: 0.001° SUB SPINDLE - Spindle nose: A2-5 - Spindle drive power: 28 kW - Spindle speed: 7,000 rpm - Max. bar diameter: 42 mm - Minimum C-axis resolution: 0.001° - Travel distance: 700 mm LEFT UPPER TURRET - Number of stations: 10 - Number of live stations: 10 - X/Z travel: 175 / 650 mm - Y travel: +/- 40 mm - Tool type: VDI 30 - Driven tool speed: 6,000 rpm - Driven tool power: 5.5 kW LEFT LOWER TURRET - Number of stations: 10 - Number of live stations: 10 - X/Z travel: 175 / 650 mm Kodpouhadzjfx Al Sonb - Y travel: +/- 40 mm - Tool type: VDI 30 - Driven tool speed: 6,000 rpm - Driven tool power: 5.5 kW RIGHT LOWER TURRET - Number of stations: 10 - Number of live stations: 10 - X/Z travel: 175 / 650 mm - Y travel: +/- 40 mm - Tool type: VDI 30 - Driven tool speed: 6,000 rpm - Driven tool power: 5.5 kW ELECTRICAL SUPPLY - Supply voltage: 400 V - Total drive: 95 kW WEIGHT AND DIMENSIONS - Footprint: 5,450 x 2,318 mm - Machine height: 2,258 mm - Machine weight: 10,000 kg OPERATING HOURS - Operating hours: 50,000 h ACCESSORIES - Control: Traub TX8i-S - Electronic handwheel - 3-color status lamp - Coolant tank: RESY * with high-pressure pump * with paper filter - Chip conveyor - Parts removal - Parts belt conveyor - Number of driven tool holders: 6 - Number of fixed tool holders: 33 - Collet chuck: 2 HAINBUCH

Kondisi: bekas, Tahun pembuatan: 2005, Technical Details: Turning diameter: 275 mm Turning length: 900 mm Spindle bore: 65 mm Drive power 100% duty cycle: 25/20 kW Spindle speeds: 1 - 5000 rpm Spindle diameter at front bearing: 110 mm C-axis: 1 - 500 rpm Number of tool carriers: 4 Turret: 1 X-axis: 290 mm Y-axis: 165 mm Z-axis: 360 mm B-axis: 360° Rapid traverse speed: 18/30 m/min Number of tools: 2x2 + 2x2 Number of driven tools: 2x2 + 2x2 mm Tool speeds: 8000 / 2000 rpm Drive power: 25% duty cycle 5.8 kW Tool holder: TRAUB 60 Turret: 2/3/4 X-axis: 170 mm Z-axis: 600/950 mm Y-axis: +/- 60 mm Rapid traverse speed: 18/15/30 m/min Number of driven tools: 10 mm Tool speeds: 1 - 6000 rpm Drive power: 25% duty cycle 5.8 kW Tool holder: DIN 69880 40 x 63 Total connected load: 95 kW Machine weight approx.: 16 t Space requirement approx.: 10.0 x 3.5 x 3.0 m with CNC TRAUB TX 8i, bar loader TRAUB Stamag DNH61 / 3000, Main and counter spindle with C-axis 1 vertical tool carrier with B-axis 3 turret tool carriers Extraction unit, coolant system with coalescence separator and chip conveyor 2 pcs. 3-jaw chucks SMW KNCS-N 170-43 2 pcs. HAINBUCH Spanntop collet chucks 40 pcs. various non-driven tool holders 6 pcs. various driven tool holders Spare parts package Kedpfjwp D Nbsx Al Ssnb

Kondisi: baik (bekas), Tahun pembuatan: 2017, Perjalanan X Y Z: 1067mm x 610mm x 610mm, ukuran meja 1270mm x 610mm, meja sumbu C 600mm (360 derajat), kepala sumbu B +/- 90 derajat, motor spindle 37kW, ATC side arm 40 stasiun, spindle taper DIN 40, spindle 12.000rpm, kontrol Hurco Winmax 5, pendingin melalui spindle, konveyor serbuk, probe spindle. Knsdpfx Aezh Nczol Ssb

Kondisi: baik (bekas), Tahun pembuatan: 2009, Fungsionalitas: berfungsi sepenuhnya, CNC Lathe TRAUB TNX 65/42 Year of manufacture: 2009 Control: Traub TX 8i-s TECHNICAL DATA - Number of spindles: 2 - Number of axes: 12 - Number of turret heads: 2 MAIN SPINDLE - Spindle nose: A2-6 - Spindle drive power: 24 kW - Spindle speed: 5,000 rpm - Max. bar diameter: 65 mm - Max. main spindle chuck diameter: 175 mm - Minimum C-axis resolution: 0.001° SUB-SPINDLE - Spindle nose: A2-5 - Spindle drive power: 28 kW - Spindle speed: 7,000 rpm - Max. bar diameter: 42 mm - Minimum C-axis resolution: 0.001° - Travel: 700 mm LEFT UPPER TURRET - Number of positions: 10 - Number of live (driven) positions: 10 - Travel X/Z: 175 / 650 mm - Travel Y: +/- 40 mm - Tool type: VDI 30 - Live tool speed: 6,000 rpm - Live tool power: 5.5 kW RIGHT LOWER TURRET - Number of positions: 10 - Number of live (driven) positions: 10 - Travel X/Z: 175 / 650 mm - Travel Y: +/- 40 mm - Tool type: VDI 30 - Live tool speed: 6,000 rpm - Live tool power: 5.5 kW ELECTRICAL SUPPLY - Supply voltage: 400 V - Total power rating: 95 kW WEIGHT AND DIMENSIONS - Required floor space: 5,450 x 2,318 mm - Machine height: 2,258 mm - Machine weight: 10,000 kg Knsdpfx Aoyw H Szel Seb New spindle installed as of 04/26 ACCESSORIES - 3-color status signal lamp - Coolant tank: RESY * with high pressure pump * with paper filter - Chip conveyor - Parts catcher - Parts belt conveyor

Kondisi: sangat baik (bekas), Tahun pembuatan: 2006, en Knsdpfx Aey Spuuel Seb