Kompresor sekrup

MARK MSB 30/10

Kondisi: sangat baik (bekas), Tahun pembuatan: 2011, Travel paths (X, Y, Z): 742 x 435 x 510 mm Number of spindles, vertical drilling head / pcs Number of spindles, horizontal drilling head / pcs The DOOSAN DNM 400 is a vertical CNC machining center designed for precision milling tasks in metalworking. It is particularly suitable for small to medium-sized workpieces and offers a solid combination of performance, accuracy, and reliability. All technical documents for the machine are available and included. Includes accessories. Control: HEIDENHAIN iTNC 530 Travel paths X-axis: 742 mm Y-axis: 435 mm Z-axis: 510 mm Rapid traverse X-axis: 36 m/min Y-axis: 36 m/min Z-axis: 30 m/min Maximum cutting feed rate: 1~15,000 mm/min Ball screw (diameter × pitch) X-axis: 40 x P12 mm Y-axis: 40 x P12 mm Z-axis: 40 x P10 mm Accuracy Kodswmxflopfx Aahjnf Positioning accuracy: ±0.005 mm over the entire travel path Repeat accuracy: ±0.002 mm Clamping table size: 920 x 435 mm Min./max. spindle nose-to-table distance: 150~660 mm Maximum table load capacity: 600 kgf Clamping table surface configuration: 4-125 x 15H8 Maximum workpiece height: 465 mm Machine weight: 5,000 kg

Kondisi: bekas, Tahun pembuatan: 2006, Travel X-axis: 600 mm Travel Y-axis: 400 mm Travel Z-axis: 400 mm Control: MSX 501 Mori Seiki Table clamping surface: 700 x 450 mm Max. table load: 350 kg Number of T-slots: 4 T-slot width: 18 mm T-slot spacing: 100 mm Spindle speed: 12,000 rpm Main spindle drive power: 18.5 / 15 / 11 kW Tool holder: BT 40 Max. torque: 110.5 Nm Front spindle bearing diameter: 70 mm Rapid traverse (x/y/z): 20,000 mm/min Feed rate: 1 - 20,000 mm/min Creep feed rate: 15 steps / 0 - 1,260 mm/min Tool magazine capacity: 40 positions Max. tool width: 80 mm Max. tool diameter with free adjacent pocket: 125 mm Max. tool length: 250 mm Max. tool weight: 8 kg Chip-to-chip time: 2.8 sec Tool-to-tool time: 1.0 sec Total power requirement: 34 kVA Knedpfov Az Ucex Aahjf Machine weight: approx. 7.2 t Space requirement: approx. 2.8 x 3.0 x 2.9 m Vertical machining center MORI SEIKI - NV 4000 DCG - approx. 14,000 operating hours

Kondisi: bekas, Tahun pembuatan: 2007, de Knjdpfjvkwk Ajx Aahef

Kondisi: baru, Tahun pembuatan: 2024, ♻ Universal application (wood, pallets including nails and staples, wood fibreboards and offcuts, veneers, MDF boards, plastics,…) ✔ Motor power: 18.5 kW ✔ Rotor length: 550 mm ✔ Rotor diameter: 260 mm ✔ Rotor speed: 80-120 rpm ✔ Number of cutting knives: 14 ✔ Granulation: 10-30 mm Knedjiq U A Sspfx Aahef ✔ Capacity: up to 4 m³/h* ✔ Extraction port: 160 mm ✔ Material: Plastic, cardboard, wood (chipboard, MDF boards, waste, ...) ✔ Feed opening: 939 x 567 mm ✔ Dimensions L/W/H: 1.88/1.12/1.67 m ✔ Weight: 1250 kg 2 years warranty or 2,000 operating hours

Kondisi: hampir baru (bekas), Tahun pembuatan: 2018, jam operasional: 2.350 h, Fungsionalitas: berfungsi sepenuhnya, Perlengkapan: dokumentasi / manual, kecepatan rotasi dapat diubah tanpa batas, konveyor serpihan, The used 4-axis vertical machining center QUASER MV 184 C is a medium-sized CNC vertical center with a cast iron frame, equipped with roller guideways for the table movement; travels: X 1020 mm, Y 610 mm, Z 610 mm, table dimensions 1200×600 mm with a maximum load of 500 kg. It is complete with a full 4th axis TJR HR 255N including tailstock and milled table face with T-slots. Kedpfx Aoxf Nbroahonf Spindle type ISO-40 (DIN 69871) with 10,000 rpm (max 18 kW), cooled via dedicated chiller unit, high-pressure coolant through the spindle, RANDOM-type tool changer with 30 tool positions and swing arm, RENISHAW TS 27 tool presetting unit, wireless RENISHAW workpiece probe, and belted chip conveyor. Year of construction: June 2017 (installed in 2018), equipped with FANUC MILL I CNC with color LCD, Manual Guide i with remote handwheel, USB port, RS-232 serial, memory card slot, and FILTERMIST oil mist extractor. The machine is in PERFECT condition with only 2,350 cutting hours. Various additional tooling and accessories available.

Kondisi: sangat baik (bekas), Travel paths: 510 x 360 x 300 mm Table size: 600 x 360 mm Spindle taper: BT30 Spindle speed: up to 12,000 rpm Tool changer: 20 positions Control unit: FANUC 18i-MB Through-spindle coolant Various accessories Kjdpfx Aeuy S Hboahsnf MARCELS MASCHINEN CH

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Filter untuk ekstraksi debu dan serbuk gergaji. Knedpfx Aajtzld Ushsf

Kondisi: baru, Tahun pembuatan: 2023, Fungsionalitas: berfungsi sepenuhnya, berat keseluruhan: 1.685 kg, jenis bahan bakar: diesel, kapasitas tangki: 155 l, warna: beige, daya: 102 kW (138,68 hp), arus keluaran: 158 A, tegangan keluaran: 400 V, frekuensi keluaran: 50 Hz, jenis arus keluaran: tiga fasa, daya nominal: 88 kW (119,65 hp), daya nominal (semu): 110 kVA, daya kontinu: 80 kW (108,77 hp), daya semu kontinu: 100 kVA, panjang total: 2.390 mm, lebar total: 1.058 mm, tinggi total: 1.681 mm, kecepatan rotasi (maks.): 1.500 rpm, produsen motor: AKSA, jenis pendinginan: air, PRP Power Output: 80 kW / 100 kVA ESP Power Output: 88 kW / 110 kVA Engine: AKSA A4CRX46TI Emission Stage: 2 Speed: 1,500 rpm electronic governor Operating voltage: 24 V Cooling: water-cooled Generator: Aksa AK 480 Voltage: 400/231 V Voltage regulator: SX460 Knodowy Ixzepfx Aahef Control panel: DSE 6120 - automatic mains failure control Battery charger: 5 Ampere Type: canopy set; weatherproof, soundproofed • Emergency stop switch • Radiator with mechanical fan • Base frame design with integrated fuel tank (155 L) and vibration dampers • Coolant pre-heating • Voltage and frequency regulation in accordance with ISO 8528-5 • Unit suitable for stationary use only Please note that these units are not approved for mobile use in accordance with the applicable EU regulation. These units are sold as B-grade stock. B-grade means that the units may have visual imperfections such as flash rust or rust on the housing. However, these defects do not in any way affect the functionality or performance of the units. By accepting this offer, you explicitly acknowledge the described characteristics of the units and the associated condition.

Kondisi: bekas, Tahun pembuatan: 2011, Technical details: X travel: 410 mm Y travel: 610 mm Z travel: 500 mm Spindle speed: 15,000 rpm Taper: SK 40 Control: iTNC 530 HEIDENHAIN smart NC Table size: 320 x 320 mm Table load: 100 kg Tool changer: 48 positions Knjdjwlhvwopfx Aahsf Total power requirement: 35 kVA Machine weight approx.: 7.4 t Space requirements approx.: 4.15 x 3.8 x 3.28 m 5-axis simultaneous machining centre, NC rotary-swivel table, C-axis 360°, B-axis +30–120°, Chip conveyor, ICS 20 bar (internal coolant supply), 3D probe, KinematicsOpt, electronic handwheel, Operating hours: approx. 9,600 h “Machine on”, approx. 3,500 spindle hours

Kondisi: baru, Tahun pembuatan: 2025, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 1.000 mm, jarak lintasan sumbu Y: 600 mm, jarak gerak sumbu Z: 600 mm, gerak cepat sumbu X: 36 m/menit, pergeseran cepat sumbu Y: 36 m/menit, pergerakan cepat sumbu Z: 36 m/menit, kecepatan pemakanan sumbu X: 15 m/menit, laju pemakanan gandar Y: 15 m/menit, laju pemakanan sumbu Z: 15 m/menit, tinggi total: 2.700 mm, panjang total: 2.800 mm, lebar total: 3.550 mm, lebar meja: 600 mm, panjang meja: 1.200 mm, beban meja: 800 kg, berat keseluruhan: 7.500 kg, kecepatan spindel (maks.): 8.000 rpm, hidung spindel: SK40, Perlengkapan: dokumentasi / manual, kecepatan rotasi dapat diubah tanpa batas, konveyor serpihan, V10 Vertical precision machining center with cross-table design Machine Specification: Control: FANUC 0i-MF Travel: X-axis travel: 1,000 mm Y-axis travel: 600 mm Z-axis travel: 600 mm Spindle nose to table surface: 150 - 750 mm Precision: Positioning accuracy: 0.008/0.006/0.006 mm (X/Y/Z) Repeatability: 0.005/0.004/0.004 mm (X/Y/Z) Table: Table size: 1,200 x 600 mm Max. load: 800 kg T-slot (table): 5x18x100 mm Spindle: Drive type: Belt drive Max. speed: 8,000 rpm Power: 7.5/11 kW Tool holder: SK40 Drawbar: MAS P40T-I (45°) Feed Rates: Rapid traverse (X/Y/Z): 36/36/36 m/min Cutting feed rate: 15/15/15 m/min Tool magazine: Capacity: 24 stations Type: SK40 Max. tool diameter: 80 mm Max. tool diameter (adjacent free): 150 mm Max. tool length: 300 mm Max. tool weight: 8 kg Indexing (tool to tool): 2.5 secs Power supply: 30 kVA Machine weight: 6.5 t Dimensions (LxWxH): 2800 x 3550 x 2650 mm Knsdevtz Dxopfx Aahjf Standard configuration: • Control: Mitsubishi M80VB • 8,000 rpm belt-driven spindle • 24-position automatic tool changer • Pneumatic and hydraulic lubrication system • Coolant system • Internal coolant tank with chip conveyor • Full enclosure • Air gun • 3-color signal tower • Standard accessories • Chip cart • CE compliant Options: • SIEMENS 828D • FANUC 0i • 10,000 rpm belt-driven spindle • 12,000 rpm direct drive spindle • Spindle oil chiller • NC rotary table, 4th axis • Tool measurement system • Tool magazine safety cover • Water gun • Oil skimmer • Chip conveyor with chip cart • Oil mist extraction (preparation) • Alternative coolant tank for aluminum chips • Air conditioning for electrical cabinet • Glass scales (not available for V6)