Mesin bubut tengah

Martin KMK 40

Kondisi: bekas, Tahun pembuatan: 1975, Technical details: Swing diameter over bed: 400 mm Swing diameter over cross slide: 220 mm Turning length: 1100 mm Centre height: 180 mm Spindle bore: Ø 45 mm Speed range: 31.5 – 1,400 rpm / 12 steps Feed range, x-axis: longitudinal: 0.08 – 1.10 m/min Feed range, y-axis: cross: 0.028 – 0.40 m/min Tailstock quill taper: MT4 Tailstock quill travel: 200 mm Total power requirement: 4.0 kW Machine weight approx.: 1.7 t Approx. machine dimensions LxWxH: 2.5 x 1.1 x 1.4 m Equipment: - Three-jaw chuck Ø 250 mm by Forkardt with reversible jaws - Multifix quick-change tool post - Coolant system with pump - Chuck guard - Chip tray - Chip guard Accessories: Fjdpfx Aou Ix E Hsdgsft - Chuck key - Tool holder - 2 gears

Kondisi: sangat baik (bekas), Tahun pembuatan: 1971, Parallel lathe Brand: SAFOP Model: LEONARD 1500 Year: 1971 Specifications: Maximum swing over bed (4-guideway bed): 2,200 mm Maximum swing over carriage: 2,000 mm Maximum turning length: 10,000 mm Maximum load between centers (without steady rest): 15,000 kg Spindle speeds (4 ranges): 1–100 rpm Diameter of tailstock quill: 190 mm Quill stroke: 310 mm Spindle motor power: 40 HP Equipped with: Fsdpfx Adow Az Hdjgsft 4-jaw chuck, diameter 2,000 mm 3 roller steady rests

Kondisi: baru, Tahun pembuatan: 2021, Bernardo AKPL 1600 x 40 Press Brake Ffedpsftuywsfx Adgjt Technical Specifications: - Press force: 40 t - Bending length: 1600 mm - Distance between uprights: 1200 mm - Stroke length: 100 mm - Backgauge range: 0 – 500 mm - Throat depth: 200 mm - Table width: 150 mm - Table height: 760 mm - Approach speed: 60 mm/sec - Bending speed: 8 mm/sec - Return speed: 60 mm/sec - Oil tank capacity: 130 litres - Motor power: 4.0 kW - Width: 2050 mm - Depth: 1800 mm - Height: 2030 mm - Weight: approx. 3030 kg

Kondisi: bekas, various types available Ffedsdc A Sbspfx Adget

Kondisi: bekas, Swing diameter over bed: 2400 mm Swing diameter over support: 2200 mm Turning length: 10,000 mm Drive power: 185 kW Face plate diameter: 1650 mm Spindle speed: 1.5 - 150 rpm Max. workpiece weight: 70,000 kg Clamping diameter: 1400 mm Technical Data Working Area Maximum swing diameter over support: 2200 mm Maximum swing diameter over bed: 2400 mm Maximum turning length: 10,000 mm Clamping diameter in headstock faceplate: 300 - 1600 mm With special jaws up to 2050 mm Clamping diameter in tailstock faceplate: 300 - 1400 mm Maximum workpiece weight: 70,000 kg Fodjxddvnopfx Adgsft Main Drive, Faceplate Faceplate diameter: 2000 mm Faceplate speed, infinitely variable in 4 ranges: 1.5 - 150 rpm Maximum torque at rated speed: 220,000 Nm Main motor drive power: 185 kW Flange center angle: 70° Supports Travel of grooving slide: 500 mm Travel of cross slide: 1400 mm Rapid traverse, longitudinal: 2000 mm/min Rapid traverse, cross: 800 mm/min Infinitely variable feeds, longitudinal: 0.6 - 300 mm/min Infinitely variable feeds, cross: 0.3 - 120 mm/min Maximum cutting force at support: 20,000 kg Tailstock Faceplate diameter (removable): 1650 mm Clamping diameter of faceplate: 1400 mm Flange center angle: 70° Rapid traverse: 1250 mm/min Special Equipment Copying device for first support: Copying length: 8500 mm Max. copying depth in a single pass: 500 mm Boring attachment: Boring bar: 460 x 390 mm Boring diameter: 600 - 1000 mm Maximum boring depth in one pass: 2700 mm For K_s of 200 kp/mm² - s_max = 1.5 mm/rev a = max. chip cross-section 30 mm² at an overhang of 1000 mm With increasing boring depth, reduced chip cross-section A guide rail for taper turning, adjustment angle up to 8° and a maximum taper length (in one pass) of 2000 mm, adjustment accuracy ± 5 minutes. A guide rail for taper turning, adjustment angle up to 15° and a maximum taper length (in one pass) of 1000 mm, adjustment accuracy ± 5 minutes. 125 kg auxiliary crane on spindle housing.

Kondisi: bekas, Technical details: Maximum ram stroke: 250 mm Maximum workpiece diameter: 80 mm Fedpfx Asw Au I Ijdgjft Maximum workpiece length: 900 mm Total power requirement: 1.5 kW Approx. machine weight: 2.1 t Various accessories *

Kondisi: sangat baik (bekas), Tahun produksi: 1991 Model: ITPS III Nomor seri: ITPS 80C 25 P1C226 Gaya tekan maksimum: 1800 kN Langkah kerja: 115 mm Daya listrik: 415 V, 50 Hz, 3 fasa Arus nominal: 119 A Fjdpfx Aswq Dpqodgsft Daya terpasang: 18,5 kW Berat mesin: 4940 kg Nomor inventaris: 9.14 Kontrol: Delem DA-65R Mesin dapat dinyalakan, namun kontrol tidak merespons perintah. Pengguna sebelumnya telah mengganti kontrol AMADA asli dengan DELEM.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2024, Technical Data: Sheet Length 4,100 mm Sheet Thickness 6 mm Distance Between Uprights - mm Total Power Requirement 15 kW Weight approx. 11,500 kg Dimensions (LxWxH) 5,250 x 2,300 x 2,150 mm Backgauge 1,000 mm D-Touch 7 Touchscreen CNC Control, user-friendly central cutting angle adjustment Ball screw spindle, 1,000 mm & automatic swiveling Support balls in the table for improved material handling Side gauge with scale, T-slot, and tilting stop Support arms with T-slot and tilting stop Cutting line illumination & 1 m foldable finger guard High-performance hydraulic and electronic components Automatic pressure adjustment Swiveling backgauge Cutting line illumination Foot pedal CE standard for EU The machines can be viewed and demonstrated at any time at our demonstration center in Staufenberg, by prior appointment. Ffedpfxeh Ib T Uj Adgot Additional machines are available for demonstration at our premises in Staufenberg. Further information is available upon request.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2012, en-001 Fodewl U Rhspfx Adgeft

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 1989, diameter rol atas: 200 mm, diameter roll samping: 150 mm, ketebalan lembaran (maks.): 6 mm, panjang kerja: 3.000 mm, Working length 3000 mm Bending capacity 6 mm Pre-bending capacity 4 mm Top roller diameter 200 mm Side roller diameter 150 mm Fjdpfx Adeuzm Aysgjft Hydraulic drop-end