Pelat penjepit dengan slot T

MASSI 250/1450/H170 mm

Kondisi: bekas, CNC 3+2 Axis Vertical Machining Center DECKEL MAHO Type DMU 35 M CNC Control SIEMENS 810D with ShopMill Serial No. 11065353554 Year of manufacture: 2001 Travel paths: X: 350 mm, Y: 240 mm, Z: 340 mm Table movements: C-axis: 360° Swivel range: +105° / -15° Universal Swivel Rotary Table: 400 x 290 mm, center bore 30H6 Table load: max. 100 kg Distance spindle nose – table: min. 145 mm to max. 485 mm Feed rate: 5,000 mm/min Rapid traverse ( X / Y / Z ): 5 m/min Input increment: 0.01 mm Total power consumption: 15 kVA Spindle speed range: 20 - 6,300 rpm Spindle drive power: 6.3 / 10 kW (100% / 40% duty cycle) Torque: max. 55 / 80 Nm Tool holder: SK 40 DIN 69871 Pull stud: DIN 69872 or ISO 7388/2 Type B Interface: Serial RS232C, LAN (RJ45) Power supply: 400 Volt, 50 Hz, 15 kVA Compressed air connection: 6 bar - CNC control Siemens Sinumerik 810D with ShopMill V05.03.22, NCU 03.03.34-CCU1E, MMC103 - 3 axes controlled (X, Y and Z axes) - Manual swivel rotary table, C-axis = 360° table rotation, B-axis = swivel range +105° / -15° - Direct position measuring system for all 5 axes - Electronic handwheel - Spindle drive via servomotor with toothed belt and 2 gearbox stages Laodpfx Aovt D D Uoahok - Fully enclosed cabin with sliding door - Swiveling control panel - Coolant nozzles on vertical head - Chip tray with coolant tank and coolant pump - Work area lighting - Documentation available Required space (L x W x H): 2000 x 2000 x 2100 mm Weight: 1750 kg Good condition

Kondisi: sangat baik (bekas), Tahun pembuatan: 2007, Universal milling machine Make: KUNZMANN Model: WF 650 Year of manufacture: 2007 Technical Data Manufacturer: Kunzmann Model: WF 650 Year: 2007 X-axis travel: 650 mm Y-axis travel: 500 mm Z-axis travel: 450 mm Clamping surface: 1000 x 600 mm Spindle taper: SK 40 Spindle speeds: 5 - 6500 rpm Quill stroke: 60 mm Swiveling vertical head: +/- 90° Table load capacity: max. 400 kg Laedpowhm S Nofx Aahjk Feed rates (longitudinal/cross/vertical): 0 - 4000 mm/min Rapid traverse: 25 / 25 / 20 m/min Distance table / vertical milling spindle: 100 / 550 mm Distance table / horizontal spindle: 270 / 720 mm Number of tool magazine stations: 20 Tool diameter: 95 mm Tool diameter at 2 adjacent free stations: 135 mm Max. tool length: 300 mm Max. tool weight: 7 kg Spindle power: 13 kW Total power requirement: 20 kVA Machine weight: approx. 5.5 t Machine dimensions (L x W x H): 3.80 x 2.70 x 2.40 m Equipment - Heidenhain iTNC 530 control - Operating manual - Enclosure - Vertical head with extendable quill - Hydraulic tool clamping - Fixed table - Electronic handwheel - Coolant system - Chip conveyor All information is provided without guarantee. A demonstration is possible at any time in our showroom.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2010, panjang pemakanan sumbu X: 650 mm, panjang umpan sumbu Y: 500 mm, panjang umpan sumbu Z: 475 mm, kecepatan pemakanan sumbu X: 6.000 m/menit, laju pemakanan gandar Y: 6.000 m/menit, laju pemakanan sumbu Z: 6.000 m/menit, lebar meja: 450 mm, panjang meja: 1.530 mm, translation-01 Lodpsxtmqtsfx Aahsak

Kondisi: bekas, Tahun pembuatan: 2018, Jam kerja: 600 jam Data teknis: Perjalanan sumbu X/Y/Z: 450 / 350 / 400 mm Jarak antara hidung spindle dan meja: 230 - 630 mm (spindle frais datar) Kecepatan rapid X/Y/Z: 5000 / 5000 / 5000 mm/menit Kecepatan kerja X/Y/Z: 10 - 2000 mm/menit variabel terus-menerus Daya dorong maksimum X/Y/Z: 10 / 10 / 15 kN Luas permukaan penjepitan: 800 x 400 mm (meja sudut tetap) Beban meja maksimum: 30 kg (meja sudut tetap) Kepala frais vertikal: Rentang kecepatan putar: 10 - 5000 rpm Daya: 10 kW Dimensi (P x L x T), approx.: 1980 x 2030 x 1990 mm Berat, approx.: 2270 kg Perlengkapan: - Panel kontrol yang dapat diputar Laodpfx Aajxu I Txehjk - Tampilan digital berbasis Sinumerik 828D - Putaran kanan/kiri spindel utama - Panduan linear - Spindle frais dengan empat lapisan bantalan radial/aksial - Motor utama dengan rem spindle - CE

Kondisi: sangat baik (bekas), Tahun pembuatan: 2010, Fungsionalitas: berfungsi sepenuhnya, Kunzmann WF4/3 Tool Milling Machine with Heidenhain TNC 320 Contour Control – Excellent Condition, CE-Compliant, from a Training Workshop!! Technical Data: >> Year of manufacture: 2010 Machine No. 347247 Ljdoxupc Ujpfx Aahjak >> Rigid angular table >> Spindle speed: infinitely variable up to 4,500 rpm >> Feed rate: infinitely variable in 3 axes from 0 to 2,000 mm/min >> Rapid traverse X and Y axis: 5,000 mm/min Z axis: 4,000 mm/min >> Travel (X/Y/Z): 400/350/400 mm >> Table surface: 650 x 350 mm >> Table load: 250 kg >> Vertical quill stroke: 60 mm >> Vertical and horizontal quill – SK40 taper >> Hydraulic clamping system >> Weight approx. 1,800 kg >> Space requirement approx. 2.3 x 2 x 2 m >> Drive power: 15 KVA Accessories and Equipment: >> Heidenhain TNC 320 contour control >> Hydraulic clamping both vertical and horizontal >> Automatic central lubrication >> Spindle brake >> Technical documentation, spare parts lists, operation manual for the controller and programming examples >> Handwheels >> Coolant system >> Electronic handwheel HR410 About the Machine: For sale is a Kunzmann WF4/3 tool milling machine equipped with a Heidenhain TNC 320 contour control. This universal milling machine is in very good condition with only minimal operating hours. It comes from a facility where it was only used for training purposes. The controller is very user-friendly. Additionally, the machine features hydraulic clamping both vertically and horizontally. Switching from vertical to horizontal operation is very simple thanks to the swiveling vertical head. The ways are lubricated regularly by the central lubrication system. The Kunzmann has been electrically and mechanically tested in our facility. You are welcome to inspect and test the Kunzmann in operation on site. A total of 7 Kunzmann WF4/3 milling machines with Heidenhain TNC 320 are available. Immediate availability.